Add FC listen address to target listeners table before attaching the
same to the subsystem listener list. Without this fix, subsystem allow
any listener provision which is very important to FC-NVMe is broken.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: I06436c0a73e65cb5f7bb3280658fcf200b975989
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1443
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In the next patch a new transport call will be added to notify
transports of subsystem->listener associations. The operations the
transports may need to perform there are likely asynchronous, so make
this top level call asynchronous here in preparation.
Change-Id: I7674f56dc3ec0d127ce1026f980d436b4269cb56
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was recently made asynchronous to support virtualized transports.
However, we're moving to add a new call to associated a listener with a
subsystem to transports and the operation that needed to be asynchronous
will actually be performed there. For simplicity, make this synchronous
again.
Change-Id: Ie98136a19c58f0f9bba0d140476de3bbb38e12d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is memory optimisation as transport id is 'heavy'. As a side effect
simpler handling of listen and stop_listen on transport specific layer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I4e9d0e0c5eee2d570ec4ac9079270c32d5afb8db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This defines the official interface that NVMe-oF target
transports may use. For now, all code is just copied
from elsewhere. Eventually we'll want to add doxygen
comments.
Change-Id: I0cd9368607544be18c7c49188d071e38ceb59b8f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This would allow to respond for add listener rpc request even
when there are async calls in transport specific function.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I94a9f45b7ba9e8d46a60ae3785953cea12554732
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It can be useful for passing additional information about nvmf
target to a handler for new nvmf connections. Context can be
stored in globals as it is currently done in nvmf code. However
in case of multiple targets or languages where accessing global
state is challenging (i.e. Rust), this becomes inconvenient.
Change-Id: Ia6a2fdba4601531822b3e5fda7ac5ab89d46f6c5
Signed-off-by: Jan Kryl <jan.kryl@mayadata.io>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469263
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Enables access control to allow subsystem access on one or more FC ports.
If a subsystem definition does not have a single valid "Listen" directive,
then the subsystem will allow dynamic listen address binding. For such
subsystems,
* When a FC port comes online, FC transport will add port's address
to subsystem's listen list.
* When a FC port goes offline, FC transport will remove port's address
from subsystem's listen list.
If subsystem definition has 1 or more valid "Listen" directives then FC ports
coming online or going offline will not affect subsystem's listen address
whitelist.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: Ic7fed76e4bf8d1df0aeeae1d4fa5e6d207afccf3
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471025
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
hwqp->fgroup is valid only for IO queues and this particular function
deals with pending requests for IO queues. Check hwqp->fgroup and
bailout if called in LS queue context.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: I40bc9d3c576abd145bd6b296c07dbd64fd3dabd1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470897
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is close to the end of the effort to unify buffer allocation
among NVMe-oF transports.
Merge each transport's fill_buffers() into common
spdk_nvmf_request_get_buffers() of the generic NVMe-oF transport.
One noticeable change is to set req->data_from_pool to true not in
each specific transport but in the generic transport.
The next patch will add spdk_nvmf_request_get_multi_buffers() for
multi SGL case of RDMA transport.
This relatively long patch series is a preparation to support
zcopy APIs in NVMe-oF target.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icb04e3a1fa4f5a360b1b26d2ab7c67606ca7c9a0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469205
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SPDK_ERRLOG lists the function name, so remove old references that
assume it doesn't and reprint the function name.
Change-Id: I69da6ca0a25bf0eda07d8dad52bcfadf964ac715
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The subsequent patches unifies getting buffers, filling iovecs, and
filling WRs in a single API. This is a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I077c4ea8957dcb3c7e4f4181f18b04b343e9927d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468953
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
This patch makes multi SGL case possible to call spdk_nvmf_request_get_buffers()
per WR.
This patch has an unrelated fix to clear req->iovcnt in
reset_nvmf_rdma_request() in UT. We can do the fix in a separate patch
but include it in this patch because it is very small.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If6e5af0505fb199c95ef5d0522b579242a7cef29
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This unifies buffer management among transports further and is a
preparation to make buffer allocation asynchronous.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8c588eeac4081f50fe32605feb7352f72c628d95
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466847
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
I/O buffer cache is per transport_poll_group now. Hence moving
pending_data_buf_queue from struct spdk_nvmf_fc_conn to struct
spdk_nvmf_fc_poll_group is reasonable and do it in this patch.
This change is based on RDMA and TCP transport.
Further unification among transports will be done in subsequent
patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic857046be8da238cb3ff9e89b83cdac5f6349bcf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466844
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The pointer to transport is set to struct nvmf_transport_poll_group
in nvmf_transport_poll_group_create() after returning
nvmf_fc_poll_group_create(). Hence use it and remove ftransport pointer
from struct nvmf_fc_poll_group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9f2b2ade77afa18d0e97949fc0c2403eb000cdad
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467060
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
RDMA transport have used rtransport and TCP transport have used
ttransport, respectively. So FC transport changes to use ftransport
instead of fc_transport.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7d98eb2f6efbae7e2b4784f31b9de5e1a81bc2ac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467059
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Both RDMA and TCP transport have uesd group for such case. Hence
FC transport changes to use group instead of tp_poll_group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic4b401179da506bb204c3ec48650db87f91fe72a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466843
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The pointer to nvmf_poll_group is set in nvmf_transport_poll_group_create()
after returning nvmf_fc_poll_group_create(). Hence holding it into
struct spdk_nvmf_fc_poll_group is duplicated and can be removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7087c5cdb94b0b0c5f51b0b63b631c08266c90d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466842
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
RDMA transport have used rgroup and TCP transport have used tgroup
for such case. Hence FC transport changes to use fgroup instead of
fc_poll_group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I91b7ad6a1c6e45caf92801b0635b18d48b3c9810
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466841
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Most variables related with I/O buffer are in struct spdk_nvmf_request
now. So we can pass nvmf_request instead of nvmf_fc_request to
nvmf_fc_request_fill_buffers and do it in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibe87e7641e5c364b20a6d877ce7928c612b0b83a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466088
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This is a small performance optimization and an effor to unify I/O
buffer management further among transports.
it is ensured that the request is the first of STAILQ when
nvmf_fc_request_execute() completes successfully.
Hence change TAILQ_REMOVE to STAILQ_REMOVE_HEAD for the case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If982842bf53ba00426a854a18eaadf8a1b8d642d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This is an effort to unify I/O buffer management further among
transports. RDMA and TCP transport have named pending_queue
pending_data_buf_queue. So FC transport follows RDMA and TCP transport.
The next patch will change pending_data_buf_queue to use STAILQ
instead of TAILQ.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I57c3c678a1e92ec262eb8940418529a62b6768c3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466675
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Use spdk_nvmf_request_get_buffers() and spdk_nvmf_request_free_buffers(),
and then remove nvmf_fc_request_free_buffers() and nvmf_fc_request_get_buffers().
Set fc_req->data_from_pool to false after spdk_nvmf_request_free_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I046a642156411da3935bc2fa2c2816fc2e025147
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465877
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This is a prepration to unify buffer management among transports.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b1c208207ae3679619239db4e6e9a77b33291d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466002
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to unify buffer management among transports.
struct spdk_nvmf_request already has SPDK_NVMF_MAX_SGL_ENTRIES (16) * 2
iovecs. Hence incresing the number of buffers twice will be no problem.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idb525abbf35dc9f4b8547b785b5dfa77d106d8c9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This follows the practice of RDMA transport and is a preparation to
unify buffer allocation among transports.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3cd4377ae31e47bbde697837be2d9bc1b1b582f1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465869
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
FC transport can use buffer cache as same as RDMA and TCP transport
now. The next patch will factor out getting buffers and filling
buffers to iovs in nvmf_fc_request_alloc_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0d7b4552f6ba053ba8fb5b3ca8fe7657b86f9984
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465868
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to the next patch to use buffer cache in
FC transport.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I116b064ea0b0a437f9a3293a6f3d46a0e5fc8ecf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465867
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This follows the practice of RDMA transport and a preparation to
unify buffer management among transport types.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic7dc8e6b826baf7f471d192630e8a048a35056ac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465866
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe-oF FC transport have used its own buffer pool and have not used
common buffer pool yet.
It looks that there is no particular reason to prevent FC transport
from using the common buffer pool.
This patch removes FC transport specific buffer pool and changes
FC transport to use common buffer pool instead. Add transport
as a parameter to nvmf_fc_request_free_buffers() because similar
APIs of RDMA and TCP transport do that.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iae3a117466c21eaddbe78a8e8023d80ef37bb3e9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465865
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe-oF FC transport have used its own buffer pool and have not used
common buffer pool yet.
It looks that there is no particular reason to prevent FC transport
from using the common buffer pool.
This patch extract checking fc_req->data_from_pool from
nvmf_fc_request_free_buffers() to make the transition easier.
fc_req->req.iovcnt and fc_req->req.data should be cleared regardless
of fc_req->data_from_pool. Hence extract them into callees.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I36420f0e573d1ec3f9f3a75f6b2ced82ade89dd3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465864
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe-oF FC transport have used its own buffer pool and have not used
common buffer pool yet.
It looks that there is no particular reason to prevent FC transport
from using the common buffer pool.
This patch adjust the setting of the FC transport specific buffer pool
to the common buffer pool to make the transition easier.
Large alignment requirement consumes more memory but is acceptable.
Cache size calculation looks dated.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id3224b65f39187c4d8e99c00cf54b1cfdd902250
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- New files and updates to existing SPDK files to add the NVMf-FC transport.
- Depends on an existing low level driver library. This driver is not part of SPDK repository.
- Makefile updates to build FC transport (using CONFIG_FC)
- Update configure script for FC build.
- New FC unit test for FC-LS commands.
- Update unittest.sh to run FC unit test (when built).
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: If31d4d25feab76c2dbe90a7faf71d465c2c3a354
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
