Reservations can be used by two or more hosts to coordinate
acccess to a shared namespace, host must register to a namespace
prior to establishing a reservation. Unregistering by a host
may cause a reservation release, this feature will be supported
after reservation acquire patch.
Change-Id: Id44aa1f82f30d9ecc5999a2a9a7c20b2af77774a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This intermediate state is unused and meaningless. the qpair transitions
into this state right before calling a synchronous operation and then
transitions to active as soon as that operation completes successfully.
If the operation did not complete successfully, we were leaving qpairs
in this weird intermediate state when for all intents and purposes they
had reverted to an uninitialized state. Keeping qpairs in the
uninitialized state until they have been added to a poll group creates a
meaningful distinction between states that can be actionable from the
transport level.
Change-Id: I6de9bc424b393b6fff221aa2f4212aaa91488629
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously, all I/O commands were implemented by simply
passing them to the bdev layer. Now, some I/O commands will
be emulated. Prepare for that by moving the code for this
function to ctrlr.c, where the emulation will occur.
Change-Id: Id34e5549e5ce216d602fb347b4506fbd324eed4e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440591
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The controller shall treat a Keep Alive Timeout in the same manner
as connection loss. If the Keep Alive feature is in use and the
timer expires, then the controller shall:
1, stop processing commands and set the Controller Fatal Status
(CSTS,CFS) bit to '1';
2, terminate the NVMe Transport connection;
3, break the host to controller association;
A timer poller is added to each subsystem to monitor timeout event.
Change-Id: I001afab8a6764f30c39df37fa96384180d117486
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is implemented at a generic level.
Change-Id: Ibf8167e828f8da27cc26cd04e611c3f3c084319a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440418
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is shared between all currently valid transports. Just move it up
to the generic structure. This will make implementing more shared
features on top of this a lot easier.
Change-Id: Ia896edcb7555903ba97adf862bc8d44228df2d36
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The nsid field can be used for per namespace basis
reservation notification.
Change-Id: Ia7212020ec893ea367afe79933e1629895fe41b8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439930
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Discover commands previously blindly used the nvmf_req->data structure.
This only works if the entire command fits in a single contiguous
buffer. commit 1d9be84bfd changed the default buffer size such that
this would become a problem for as few as 8 subsystems.
Fixes github issue 525
This change may also help prevent data corruption as we were copying up
to nvmf_req->length data into the buffer. For requests with multiple
data buffers this can cause us to copy off the end of that buffer.
Change-Id: I788259da988b2458f57ee2795e1c5d3ced8803dd
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/435544
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For NVMeoF, extened host identifer is used which is exactly
the same size as uuid, while here, use uuid data structure
makes sense. For NVMeoF reservation features, host identifier
need to be used with each registrant, using spdk_uuid_compare
becomes straightforward.
Change-Id: Ib6ffaa92fab5e0ae5037682be14fcc415f9714d7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/436302
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: Jim Harris <james.r.harris@intel.com>
Having the buffers be the same size as the maximum xfer size doesn't do
us any favors. Make these buffers a ratio of the maximum transfer size
and the number of supported nvmf SGLs.
Also configure the number of nvmf request iovs to correspond with this
new ratio.
Change-Id: I3147dcd86b599c74521ebfdf3bcdbcdee8871a3a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/428747
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This option is deprecated. Also, rename the rpc and configuration
options for setting the opts to reflect that they now only set the max
number of subsystems
Change-Id: Iaabcbf33dd0a0dc489d81233fda74e9e7f3e0d2e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430161
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When we thought we could do error recovery we differentiated between
inactive and erro states. However, that's not possible so collapse
them back into one.
Change-Id: I57622c400378f2d4c518efbc12fb52e665a9ba4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
In the case that the subsystem in the related poll group has
NULL IO channel assigned due to some problem like out of resource,
for example, the NVMe SSD hardware itself has limited number
of IO qpairs. The subsystems in the particular poll group
could have zero valid channels. In this case, the creation of
assoicated poll group will fail and when adding the new qpair
to the specified poll group, needs to have a check and pick the
available poll group.
Change-Id: Iedee2a6375e48eb7bf899cfb0542c565c7ebd231
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/423646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function doesn't return error code
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I67a8fa7393990470e509baa8934e78bc6f6a6c9e
Reviewed-on: https://review.gerrithub.io/429441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
New function was added in bdev layer to allow
handling spdk_bdev_io buffer exhaustion.
This patch adds that functionality to nvmf bdev.
Change-Id: I5b915abcccec930c3eb684d95bc64482e7887af5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/418937
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The admin queue pair may get disconnected before
the controller is entirely destroyed and can't
be relied on to obtain the correct thread.
Change-Id: I5e80ef286693d53a161134610dd8354c458f8390
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/422134
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: qun wan <qun.wan@intel.com>
We should not use mutex, but use the spdk_send_msg policy,
then we can let only one thread to handle that and
eliminates the segement fault issue.
Now in the code, the qpair_mask is handled by the same
thread, e.g., the thread which owns the admin qpair of
the ctrlr.
Change-Id: I609fd4d49f5ecc85bc47bf9c23afbb507900be7c
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/420827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
With the reordering of the nvmf_tgt states, we need to remove any
connections accepted during the shutdown pahse of the target.
Change-Id: I768484366da8273df74b8d52a3e8de6158b6995f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The poll group pause, resume, remove, and add functions are only called
from the subsystem_state_change_on_pg function. Previously, they would
return immediately and the state change would move on to the next
channel. However, some of these functions (specifically remove) kick off
asynchronous APIs and we should not iterate past them until those
asynchronous operations complete.
Change-Id: I78804273b39f2d171ba26ac4478ad515356833f3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419289
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
It is necessary to free the AER without sending a completion to ensure
that the host does not attempt to send an additional AER upon receiving
the first completion.
Change-Id: I2b3f8f286d6396019d8ace97d2376547705b8d9d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At times, it may be necessary to free requests without completing them.
For example, when freeing a qpair, one needs to free the AER sent from
the host before deleting the qpair. It is important not to send a
completion for the AER because:
1. According to the spec, this will trigger the host to send another AER
2. No Asynchronous Events have occured, so we should not complete the
AER.
Change-Id: I92e163f0fed0ee2bc942569a647cb3c1967edec9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419732
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
RDMA QP is attempted to recover after IBV_EVENT_QP_FATAL event
is received from IBV asynchronous event API.
RDMA QP is put into ERROR state and is not processing any inbound
requests. The outstanding requests are only allowed to COMPLETED
and FREE states, no outbound transfers are performed.
IBV_EVENT_QP_LAST_WQE_REACHED or IBV_EVENT_SQ_DRAINED event is
expected to follow IBV_EVENT_QP_FATAL, giving a go to draining of
all outstanding requests and freeing the associated resources.
The requests executed by block layer are gracefully allowed to
complete, but no outbound transfers are made.
Note, outstanding requests can not be reliably completed through
polling the CQ, as WC's with failure status might not have all
the fields valid. The failed WC's are dropped and the outstanding
requests are fetched from the appropriate state's linked list.
QP recovery is triggered when there is no more outstanding requests.
If QP recovery is completed succesfully, the RDMA QP is put back into
ACTIVE state, the QP disconnect is triggered otherwise.
Change-Id: I45ee7feea067f80ccc6402518990014d691fbda3
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Reviewed-on: https://review.gerrithub.io/416879
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove the list of qpairs per controller.
Change-Id: I6aaeed43c64b38b60c5a609123b3542bb7130a90
Reviewed-on: https://review.gerrithub.io/415317
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will be re-added later in the series, implemented
in a different way.
Change-Id: I1f9df22025eb37f7f58ce1547862f61906ea557c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415315
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove the old trace points since they didn't actually
work. More trace points should be added in the future.
Change-Id: I1b658af8e309137882c31460723d7bb94d555b79
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414280
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9552354d620986c2a3d6b071f32b587e9e683198
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413861
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The qpair mask can be used instead.
Change-Id: I9063e656c7c44663dc96adfd5ef52a5a1065d2ba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413860
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Instead of scanning a list of all qpairs, use a bit
mask to determine if the requested QID is unique.
This is not for performance reasons, but because
eventually the ctrlr's list of qpairs is going to
need to go away.
Change-Id: Ic25ee60e4f9cd9d596815719760d5be892f29d0c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/413286
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Combine request lookup and abort into a single operation. Keeping them
separate would result in duplicating a lot of logic for finding the
proper list from which to remove aborted requests.
This is still a no-op for now, but it paves the way for aborting
requests that are still queued in software.
Change-Id: If8f268521f2c9f93b413261d87e9f39e539813aa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412880
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I12e629d21f30372ae3c0d3939c036b0ae3562e6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412992
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Per the NVMe specification, NN cannot change while there
are connections present. There was originally a check
for this that was removed in commit 763ab88 to match
the behavior in the Linux kernel. However, after a
discussion with the NVMe specification committee, SPDK
was originally correct.
Change-Id: I42414d1ee0c8c83f3335d8790edbf65d813c5c74
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412544
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: To make the reqs recycle more flexible.
Change-Id: Ied37397a10dada22a7aee6bb5a316da6a0583073
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/410866
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will allow us to later quiesce all requests for
a given subsystem.
Change-Id: I50a4df9bf1f65a2fc6668295cf9978d2099f6507
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406450
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The realloc breaks TAILQs inside the structures, which causes
subtle bugs. Instead, statically allocate all of the subsystem
arrays. This sets up the maximum number of subsystems to be
configurable, but does not actually expose it through the
config file yet.
Change-Id: I7347b6002b6babc0678ce59cd218a454fe3a6f88
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/410521
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Update the thread-local caches with new namespace data during each call
to spdk_nvmf_subsystem_remove_ns to handle the case where the user
requested to remove a namespace and then immediately add a different
one at the same namespace id. This makes the call asynchronous.
Change-Id: I8fd1968f7da78966386de18506b98d403b82d80e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/408220
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This reverts commit 498f9add11.
Making the subsystem removal asynchronous seems to be triggering an
intermittent failure in the NVMe AER test. Let's revert this for now
until we can diagnose the issue.
Change-Id: Ie1d598f0d5cce07e6869d87cd8388848caa78e46
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408118
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Performing a subsystem update on each poll group after the addition or
removal of a namespace allows us to avoid the case where we pause a
subsystem, perform a removal, then an addition, resume the subsystem and
don't update the channel for that subsystem. This, however requires that
spdk_nvmf_subsystem_remove_ns be asynchronous.
Change-Id: I856572c02e6267f708da3a956accbbedae7260fb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/407012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Subsystems enter the paused state when their internal
data representation is changing (i.e. namespaces are
being added, etc.). Queue incoming requests while
in this state.
Change-Id: I51e0c687b5b0f98351faa20dffa57110eb4a9df4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406449
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
No code change - the existing code is moved as-is.
This is the only place it is used, and it is conceptually part of the
virtual controller implementation.
Change-Id: I863f5931225c4d78e515341445e91b29a73da64d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406251
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users can use RPC to add/remove a namespace to/from
existing NVMe controller, SPDK NVMeoF target will
generate an asynchronous event as an indication to
host when asynchronous event request is available.
While here, we also set the event with invalid log
identifier, so that the host doesn't need to clear
the event. Users can use Set Feature to disable
such event.
Change-Id: I93c4d752f552d3c86c53e80877aa61c093e167cc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/398759
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most of these don't actually do anything useful yet, but they are all
required by the NVMe 1.3 specification.
The features are also rearranged in numeric order to make it easier to
match up the cases in the switch statements to the specification.
Change-Id: I5f70ecb0bb38b9e1d8287d32fc2e03bca5f1f8a6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403903
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1) The user should provide MaxNamespaces during the construction of the subsystem
2) The namespace which is added should have nsid less than or equal to MaxNamespaces
3) If the user does not provides MaxNamespaces then the exsisting behaviour continues where the nisd can grow dynamically when it is not connected.
Change-Id: I54769d9669575a5f6bf56fe5a262191ac51c474d
Signed-off-by: suman chakraborty <suman.chakraborty@wdc.com>
Reviewed-on: https://review.gerrithub.io/405375
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No functionality change, just a cleanup. This will help with future
simplification patches.
Change-Id: Id2efd851ed0add664e516725ab98b5e1f8cafff5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403900
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
