This patch fixes missing free of qpair_mask when a listener error
occurs in ctrlr_create.
Signed-off-by: Jonas Pfefferle <pepperjo@japf.ch>
Change-Id: I09162b86d8ac73bf9fc2006a08dcc0a955f222b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7818
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Not just one with extra available info. Also remove the extra
read of the error register, not required.
fixes: #1927
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I28badb45d8cc8d16b72f7019bd2a2044998fc402
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7729
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Nvme-cli uses NVME_IOCTL_IO_CMDs for "io-passthru"
commands to cuse devices. This patch adds support
for that IOCTL.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I20e0ac91ba08fce91bc5da1f4a1e454058cdd1e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7741
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The nvme cuse IOCTLs are actually creating passthru commands
that can be either IO passthru commands or admin commands.
Renaming the routines to correctly reflect that should limit
the confusion when reading the code. Passthru commands that
are admin commands will go to the spdk_nvme_ctrlr_cmd_admin_raw
interface and passthru commands that are IO will be sent to the
spdk_nvme_ctrlr_cmd_io_raw interface.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I8d427fe8b5f503fdb2d193236c77d410d5b13886
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7740
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Nvme-cli uses BLKSSZGET so support needs to be added for
nvme cuse devices.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: Ic8316713b2d017c8ff32a225efff6bcb95842799
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7708
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is useful to have debug log information in the nvme_cuse
path when debugging IOCTls and flows.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: Ifef1bb82c96438e2fcbb9ad2fafe3f3eb66bed51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7707
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The purpose is to prepared for implement the async crc32 caculation
in the future patch.
Change-Id: Ia75f28154c49f08b527d48c63b9da79a6bdfede8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7794
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The purpose is to prepared for implement the async crc32 caculation
in the future patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I49f84ea1966f0acdd6f5aeb7192896f91fd16dee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7793
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Purpose: We will also support the kernel idxd driver, so we do not
need export this feature in the module file.
Change-Id: I965e031497920f527962ba187bccd81de6977b8f
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6ad71a65244526e99a36920c630096cc9739d94d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7809
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is prepared for using the hardware offloading
engine in accel framework. And some fields in nvme_tcp_pdu
needs to be DMA addressable.
Change-Id: I75325e2cd7ff25fe938bea0ac9489a5027e3e0e9
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7770
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is used to prepare using the accel framework to calculate
the crc32 because some fields in this structure needs to be allocated
in DMA addressable memory.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ib8def5596e60f4702709da647145c4e2b6d6848f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7767
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Note: a lot of the TCP and FC trace registers were
specifying '1' which means the arg type is a pointer,
but in reality it is always passing 0 for arg1. So
this patch just changes them to SPDK_TRACE_ARG_TYPE_INT.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I18d3cedd21e516f16cb2cd0a7f8c16670b1895d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7763
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
We already pass the PDU as arg1, so by changing the
trace register descriptions, we can map the PDUs to
more readable IDs when running the spdk_trace app.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad7106eeb0f5fe738f81da5ee174515d1cf4b6ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7757
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This was accidentally moved to the wrong place as
part of some earlier iSCSI refactoring. This trace
record should be executed when we have finished
reading all of the data for any PDU, not just those
with immediate data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1d17e5e79ff220e9e9b3dd55e247e745bd58019
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
It can be useful for testing or development purposes to force clients to write
to doorbells using vfio-user messages instead of directly into shared memory;
add a transport-specific option to disable the shared mapping.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I7ed062fbe211ba27c85d00b12d81a0f84a8322ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7554
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will help us to add unmap split function, also
remove bdev_io_type_can_split() because we changed
to use swith(io_type) ... case now.
Change-Id: I449d6a9f5bf2d0b43dd124bbfc9e1ca2afddc15a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7516
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Only the last bdev_io can be freed without this fix.
Change-Id: I0d05b5d89e38ef60872ebc0f23aaed0c622593c4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7571
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Purpose: This patch is used to prepare to add the kernel
idxd support later.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: If89665f95d622c7342ab75050664158ec6fc615a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7330
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
(Note: this patch was previously applied as b32cfc46 and then reverted
as 63642bef.)
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7739
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
1) use spdk_bdev_get_name() accessor
2) use __SPDK_BDEV_MODULE_ONLY #define
The latter allows nvmf to just get the spdk_bdev_module
definitions and APIs that it needs for claiming bdevs
for purposes of avoiding the same namespace used in
different subsystems.
This also ensures that future changes to structures
like spdk_bdev and spdk_bdev_io will not cause
lib/nvmf so version changes.
Note: we include bdev_module.h explicitly in the
nvmf/subsystem unit tests now, before including
subsystem.c, because the unit tests do depend on
knowing the internal structure of spdk_bdev.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2f499a741d19f4749eadb402641f28137245fd23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7738
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
libvfio-user DMA APIs report all regions notified by the client, including those
that don't have a corresponding shared mapping. There are several of these for
a typical VM, so just ignore this case.
Signed-off-by: John Levon <john.levon@nutanix.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I37b06f4bc6d1818a03c8742616ed142f575d3f0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7532
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When payload_size is 0, we may get wrong cdw10 because of the calculate: 0 - 1,
add value check to fix value inversion bug.
Signed-off-by: sunshihao <sunshihao@huawei.com>
Change-Id: I3bcd38ba981c854ff917282341d32aac47d22b76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7443
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This allows us to remove separate fcntl() calls to
set O_NONBLOCK.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1a590cfb3b65b3174bb5ef33e060cdc9bb7ac86c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7598
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
This simplifies the code a bit, removing the need
for the separate fcntl() calls.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4fef8f01a055d1471df87bd979c21d6198e9868a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7596
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It is already set by nvmf_tcp_req_pdu_init
when we get the pdu. So we do not set it again.
Change-Id: I034bbc46e600afd802457c0b152e303f16bafba3
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7714
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reverts commit b32cfc467b3f3a6a7bd00631334612f6181f7c08.
This commit fails the ABI checks and only got through because the checks
were disabled until 21.04 hit.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id26b8f8ba551193d99b1ccbd31b35378b4095a20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7731
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7310
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We have seen that dptr was not alligned to 4k using cuse. Added allignment of data in cuse ctx to 4k same as it is done in nvme_allocate_request_user_copy
Signed-off-by: jwyka <jakub.wyka@intel.com>
Change-Id: Ic5c2482eae20d64ba467016eb61f5255467f70a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
When performing snapshot creation the I/O is frozen
during the process. The blob persists for extent page
allocation is delayed until snapshot creation is finished.
This results in multiple blob persists executing one after
the other, with only intent of writing out updated extent table
pointing to new extent pages.
Since blob->state is marked DIRTY before issuing each persist,
but a single persist completion marks state CLEAR.
Blob serialize correctly expects each persist to contain
dirtied metadata, in order to avoid unnecessary md writes.
Since all other instances of marking blob DIRTY is explicit,
assert in blob serialize is left as is.
Instead when running the queued up blob persists, the blob
state is marked DIRTY.
Side effect is that it will write out same md in some cases.
Fixes#1909
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I39f37299f3f0ebfccbdd4063781b5ecce286e993
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7640
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_vtophys() takes a mapping_length parameter, so
it can return the length for which the returned
virtual address is valid.
But spdk_vtophys() will only return the max
between the valid length and the input mapping_length
parameter.
So the nvme SGL building code for contiguous buffers
was broken, since it would only set the mapping_length
once, before the loop started. Worst case, if a buffer
started just before (maybe 256 bytes) before a huge page
boundary, each time through the loop we would create
a new SGL for only 256 bytes at a time, very quickly
running out of SGL entries for a large buffer.
Fixes#1852.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1000d8b130e8e4bfeacccd6e60f8109428dfc1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7659
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The IDENTIFY_CNS quirk was applied as part of QEMU
OCSSD handling in commit 6442451b. But it was applied
not only to the OCSSD dev ID, but also the dev ID
for non-OCSSD NVMe controllers.
Starting with QEMU 5.2, QEMU will allocate a default
256 namespaces, but only some are active (associated
with the backing disks specified by the user). QEMU
supports IDENTIFY_CNS, but since this quirk was set,
we wouldn't send a real IDENTIFY_CNS and instead
would just populate a fake list where all namespaces
were considered active. This causes breakage in
a few places - mainly where we iterate through
the active namespaces, and then are surprised that
calling spdk_nvme_ns_is_active() returns false.
It was also breaking bdev_nvme_attach_controller RPC,
since by default we can only support returning 128
names, but since all of the namespaces were deemed
active, it was trying to return 256.
Fixes#1916.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4fdd27e0e36f0ac07a95f9f29aa83357e8505a45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7658
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When zcero copy send is enabled and used by initiator,
it could significantly increase latency in some payloads.
To enable more fine graing configuration of zero copy
send feature, add new parameters enable_zerocopy_send_server
and enable_zerocopy_send_client to spdk_sock_impl_opts to
enable/disable zcopy for specific type of sockets.
Exisiting enable_zerocopy_send parameter affects all types
of sockets.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I111c75608f8826980a56e210c076ab8ff16ddbdc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7457
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are three modules implementing the bdev-zone API:
bdev_nvme, bdev_ocssd, and vbdev_zone_block.
For all three modules, the number of zones can be calculated using:
block_count / zone_size.
To avoid this calculation being performed everywhere, create a helper
function in bdev_zone.h, together with the other zone APIs, such that
a user can easily get the number of zones.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I2967b15a604ab8bf4420588e7510b9820762f925
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7451
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
tcp transport doesn't send a response capsule when
c2h_success is set even if cdw0 or cdw1 are non-0.
Signed-off-by: Ed rodriguez <edwinr@netapp.com>
Signed-off-by: John Meneghini johnm@netapp.com
Change-Id: Ieba81fcc50342a2009f7931526e6f8392e26b6a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6808
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When do spdk_reactor_set_interrupt_mode, if reactor
already runs in the specific mode, directly call
callback function before return 0;
Change-Id: I1fd8b753e9881755aa128aabe6d1e2749e58b39b
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7549
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The net library isn't needed - everything these RPCs
do can be done externally to the SPDK application.
This library will be removed in the 21.07 release.
As part of the deprecation, mark the net RPCs as
private. This will prevent an upcoming patch from
complaining that these RPCs are not documented.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61118820fd29e410dca763595c3d9fd01a57373d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7592
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
For pollers that don't natively support interrupts, using
a busy wait mechanism temporarily.
An interrupt falicity for busy wait will
be registered for non-periodic poller.
Internally, an eventfd is created to each busy wait
poller. Write the eventfd when set interrupt mode,
and only read the eventfd when set back to poll mode,
then the busy wait poller will be called repeatly
in interrupt mode.
Change-Id: Iaeae14d1ff69fd9ef7d606a0b0a70193764513e9
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6711
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
In next patch, if poller doesn't have a period, eventfd
will be created which's always busy automatically.
This eventfd can be combined with timerfd. So rename
timerfd to interruptfd.
Change-Id: Ibffa30ecfcaa73e55f47e97fac854641b74f2dfb
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7546
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Defined callback for spdk_poller to adapt itself to
set interrupt or poll mode. The callback can
be registered to spdk_poller by new function
`spdk_poller_register_interrupt`
Interrupt callback operations for period poller are implemented,
so period pollers now are interruptable.
Change-Id: I2aa6ebfdd75f76b85a70af7e42530be4131ddc8a
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5752
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
These refined functions are prepared to adapt period
poller to following poller switchable API.
Change-Id: I34d2a785fa0e757b97b0dac5ccf24819d75e0184
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7156
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
