setup.sh uses lsmod to detect if a module is present but this does
not work when modules are built-in. We add a second check (on
/sys/module/<module>) and place the check in a function.
We also change the sense of driver_loaded so it is more sane and also
allows us to return different positive values depending on if the
driver is a module or built-in.
Change-Id: Iccc4dca212a6f04fb2ac9bd4768935f8b2bb240a
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/402178
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unit tests implemented in following patches.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ib18c9060f527bd22bfdbed74e96871a6e0551ead
Reviewed-on: https://review.gerrithub.io/396648
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently only thin_provisioned zeroes back_bs_dev is supported.
There was no unit tests for channel in this bs_dev, because it's never used.
However, unit tests in patch https://review.gerrithub.io/c/393935/ show that channel is wrong.
This patch passed proper spdk_io_channel to callback function.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ia288ef6c35343ce533ea3f74603e73f823a18181
Reviewed-on: https://review.gerrithub.io/400955
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Cover spdk/nvme-cli main commands(Porting from DTS)
Change-Id: I3afa71c5180a0143bc6c55f70b18c45bc098ec6e
Signed-off-by: wenzhong wu <wenzhongx.wu@intel.com>
Reviewed-on: https://review.gerrithub.io/392607
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds the QoS parameters on the bdev channel.
Change-Id: I0cb9bf9e9cdbbe61c70c4a3df4eeb8be774793a0
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393129
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In 35a331a9 we added a new API that enables peer-2-peer (P2P) copies
between NVMe SSDs using Controller Memory Buffers (CMBs) that support
DMA operations. Add documentation for the API, the example application
(cmb_copy) and for P2P setup and operation.
Note that this new API is currently marked experimental.
Change-Id: Ifeedb86d5b72b3aa7a6803b87c4d4709c54108f8
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/401961
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Briefly tested with SPDK target via bdevio
through both vhost-user and QEMU's virtio-pci.
vhost-blk driver is not mentioned in any doc yet.
A virtio-blk bdev can be created as following:
`construct_virtio_user_blk_bdev /tmp/virtio.0 MyVirtioBlk0 --vq-count 16`
`construct_virtio_pci_blk_bdev 0000:01:00.0 MyVirtioBlk1`
or
```
[VirtioUser0]
Path /tmp/vhost.0
Type Blk
Queues 16
[VirtioPci]
Enable Yes
```
If `Type` field is not present, the VirtioUser
section will be parsed as a SCSI one, preserving
backward compatibility.
Change-Id: I3eae9f3b90570fbb0177df4951e5eed86fe07c66
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1c5adcce861b8a1fc8f8c96a3a237c4c2dae61af
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/401559
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If this polling group is not initialized, we do not
need to destroy the polling group.
Change-Id: I5a94412d7f42b05d4a457c8652e2f465190fbe6e
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401362
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Alters internal spdk_process_new_interface_msg() function
such that it returns a failure instead of exit()'ing.
Change-Id: I31c5dd9db43449f81dbb0f581258476a58aa8000
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/402165
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There was a bug reported by Cunyin Chang with regards to how the
cmb_current_offset was calculated when the CMB offset into the CMB BAR
is non-zero. This patch fixes this issue and also fixes the problem
that the last valid offset into the BAR *may* differ if registration
is utilized or not (due to the 2MiB alignment and length requirements
for registered memory).
Change-Id: Id08d6a5a40b828338f6a66599171cc8dd59768a3
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/401832
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If19c263d184c1eaab12950ba0baa05e7f3aea6e0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/401729
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function consolidates cleanup behaviors that the pool should follow
in the event of a failure.
Change-Id: I8623f065146292b29a38eb199dcbeac5787723e7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/401857
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I37f7b76828c74b07292a06ede6e50de05e565d00
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401658
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The Ceph scripts can now be run from any directory; they don't depend on
their $PWD being the script location anymore.
Change-Id: Iff883a3e9b8ba2d0a6193e2f5c047eb9d7d423fd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401657
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The better location is to put this function in
the end of process_read_task_completion which can match
the the same function call in spdk_iscsi_op_scsi_read.
Change-Id: I7dbfb23e2c469e0be22e148299643a99b93c8018
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401985
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We don't normally accept pull requests via GitHub anymore, and the
astyle download has been failing intermittently due to SourceForge
availability issues, so just remove the check from the Travis script.
Change-Id: I2aca07622126045e4605f93f4780b6bb55bb678a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402166
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since we have two pollers for each iSCSI polling group,
so it could be possible that the nop_poller to set
iSCSI connection in existed or existing state.
So add a check here, which means the incoming data
is too late.
Change-Id: I94e5090b005c35c9eb5d7eedbd7acdae67327f94
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402039
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In some cases, an io_channel will be put (freed) as part
of the last execution of a poller. Previously, the
callback would set done=1 and would not continue
executing events meaning the deferred put_io_channel
events would not get executed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia5a6ea6873ceb1c3d5daf0545cdc3615d11712d2
Reviewed-on: https://review.gerrithub.io/402139
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use python decorators to replace the header
and footer functions.
It's more convenient for printing the message
When add new case only need to use the @case_message
before the def test_casex(self):
Don't need add the header() and footer() functions in test_casex()
function and don't need pass the number.
Change-Id: Ic8f1e2e9342d06409c088d6ef011a87c7ee98950
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/401289
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
It's apparently unavailable on some systems.
We used it to grep all Virtio-PCI block devices
before matching them against our desired PCI bdf
in get_virtio_names_from_bdf(). If we were unbinding
a Virtio-PCI device and lsblk failed, the script
assumed there were no block devices and hence no
active mountpoints for that Virtio device. The initial
grep is not necessary and, since it's causing us
troubles, is now being removed.
Change-Id: I5a621391dc4772b2bd67eaa832e318d9a0d25948
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/401780
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Purpose: To make the logic clear.
Change-Id: I6176f359a23816b316e92b63ee2e5d5175ae7e7b
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401772
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a check to make sure it was properly removed after the last
build.
Change-Id: I2e425e81b88116190034f181e8aaa0e0a17ddb77
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/401860
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This allows listening on the same port on IPv4 and IPv6 simultaneously;
otherwise, the second listen call would fail with an "address in use"
error.
Change-Id: I75010a2d1ec6559653e0bda40517dc13d8f5b9a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401718
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The current test scripts created a lot of data inside the SPDK repo;
move this to /var/tmp/ceph (where the image is already created) to avoid
polluting the repo working copy.
Change-Id: If895baecfa7fef80733f0d629f091a479a634a52
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401647
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Purpose: This test will be helpful to find more
issues when running nvmf_tgt with multiple core
configuration.
Change-Id: I06b6bec7a258084a30677356cdf89eb7f61c4ed8
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401543
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is the first step in reorganizing the spdk test heirarchy.
Change-Id: I83467653af2da2a53251649092bed6902d6cb86e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/401707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
blobfs and lvol can now use this to automatically iterate
all existing blobs during spdk_bs_load. Changes to blobfs
and lvol will come in future patches.
This will also be used in some upcoming patches which need
to iterate through blobs during load to determine
snapshot/clone relationships.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic7c5fac4535ceaa926217a105dda532517e3e251
Reviewed-on: https://review.gerrithub.io/400177
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently, this just reports the EUI64 and NGUID types, which are
already available in the Identify Namespace data, but this sets up the
framework for reporting a Namespace UUID (which doesn't have a
corresponding field in Identify Namespace) in the future.
Change-Id: I758e6d402ff874d65eca3f1db98d92c1a3f7a11f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400893
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch is used to implement the sock fd event group
polling mechanism if there are incoming data from network
(read event in SPDK iSCSI target side) , thus we can awake
many connections one time, and it can reduce the system call
overhead.
Change-Id: I76c26a89ef9365d7e1ccec616985e7435253896b
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399796
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This simplifies the code and eliminates the possibility of accidentally
inserting other items in between a key and its value.
Change-Id: Ic3bf7d0a85e9475171fe00cbcac6fe3ede731e69
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401046
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Ctrlrs list maintanined by the subsystem structure should be operated
by the thread which creates the subsystem. And this will make the
operations correct.
Change-Id: I7f881a77b1846658b3acd4270b74f86816e87803
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401541
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: To make the nvmf subsystem management correct
in next patch.
Change-Id: Ie5433f3a7d47f05c5949dfc723aba73465623f88
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401540
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unit tests that use this will still immediately execute
the messages by default. But upcoming changes to
queue persists will need to leverage testing asynchronous
behavior so these changes enable that.
While here, fix some bugs where _bs_flush_scheduler()
did not fully flush the queue of scheduled ops.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I009e8277eef41d7e3677d9f135db34d8eaf2f071
Reviewed-on: https://review.gerrithub.io/401256
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Finish the sequence first, before calling _spdk_bs_free().
Otherwise synchronous bs_devs (like we use in the unit
tests) cause the sequence memory to get freed via
_spdk_bs_free() and then we try to finish the sequence.
This eliminates the need for g_scheduler_delay and
_bs_flush_scheduler() in the blob unit tests. But don't
remove them - they will be useful in upcoming unit tests
for queued persist operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I09aac3ae4d3a56ff8e04a5b822fcd6746f13afc3
Reviewed-on: https://review.gerrithub.io/401267
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
No functional change - this just separates out the
code that creates the persist ctx from the code that
actually performs the persist operation.
Part of series to enable queuing persist operations -
this will be useful for starting a previously queued
persist operation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie1966ff2a477f3075c36f90560010d036658f803
Reviewed-on: https://review.gerrithub.io/401255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaef32731b05a53ac0707524d78086eedc89d6af6
Reviewed-on: https://review.gerrithub.io/401254
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I096fb24dd2fe2fc4dd97d80c957c328d960fb867
Reviewed-on: https://review.gerrithub.io/401073
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
