This batch_op field is not necessary because we can
use the comp_ctx->desc->opcode to judge whether it is related
a batched task or not.
Change-Id: Id329221ccf272c4c3bb8c1b5ec08433029a9a1f8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8865
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Previously we used a counter of our own to make sure all batch
elements plus the batch itself were done before we freed the batch.
This was due to some observations early on that the batch desc
could complete before the individual elements and a lack of clarity
as to whether this was due to the simulator or the fact that
we poll on completions and could therefore "see" completions in
a different order at that time (we were using bit arrays to poll).
Now we use an ordered (in time) list to poll locations so if we
instead put the elements on the list first and then the batch desc
itself we are assured to always "see" them in order provided the
underlying device meets spec which there's no reason to assume it
does not.
This simplifies things a bit at the same time and still assures
that we call list calbacks in order and then the batch callback
without "special" handling.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4d9e3997786f2116ce6515682b8117799c645f51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8397
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Left over from when the field was a void *
Signed-off-by: paul Luse <paul.e.luse@intel.com>
Change-Id: If9dfe2878f6afd6137d6d8efec90e310baf417f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8280
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Allows for better performance by not hitting the same portal
address with every submission.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1ec8eae6f3acec9e98161029cd5406ec08603aa6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8190
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
This patch is used to add the support for users to configure
use kernel or userspace idxd library.
Change-Id: Ie159b897bc9595894ad8f333168efaea6c2a3d78
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7332
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch is used to add the kernel idxd support.
Without this patch, we can use userspace idxd driver
under accel_engine library (module/accel/idxd/accel_engine).
With this patch, we can also kernel idxd driver under the
accel_engine library.
Our approach is implementing a wrapper library to use IDXD
device by leveraging the kernel DSA driver in SPDK idxd library
(lib/idxd).
Then users can leverage the RPC later to configure how to
use the DSA device by user space driver or kernel driver.
In this patch, our approach is to use the idxd-config library
to export the WQs (Working Queues) exported by the kernel.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I3a25a4fe0327bd626bf6883dfbe54437d3209e51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7331
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Just remove this function pointer and add a new one,i.e.,
dump_sw_error.
Because this function pointer is only used to
read a sw err info. We can hide it in the detailed
idxd implemenation.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I42fe2220dae85df307b5af64e37acfd7f748915b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8707
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Was using "dst" in some cases and "crc_dst" in others for crc32c
related calls. Update them to always use crc_dst
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icf200f1734c64c29881f23b02b8d12bad81b3ca0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Recent work identified race conditions having to do with the
dynamic flow control mechanism for the idxd engine. In order
to both address the issue and simplify the code a new scheme
is now in place. Essentially every DSA device will be allowed
to accomodate 8 channels and each channel will get a fixed 1/8
the number of work queue entries regardless of how many
channels there are. Assignment of channels to devices is round
robin and if/when no more channels can be accommodated the get
channel request will fail.
The performance tests also revealed another issue that was
masked before, it's a one-line so is in this patch for convenience.
In the idxd poller we limit the number of completions allowed
during one run to avoid the poller thread from starving other
threads since as operations complete on this thread they are
immediately replaced up to the limit for the channel.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I913e809a934b562feb495815a9b9c605d622285c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8171
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In spdk_idxd_configure_chan(), if memory allocation fails in
TAILQ_FOREACH() {} code range, we will goto err_user_comp and
err_user_desc tag, in which we donot free chan->completions
and confused batch->user_completions with chan->completions.
Memleak problem and double free problem may occurs.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: I0e588a35184d97cab0ea6b6c013ca8b3342f940a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8432
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
In spdk_idxd_get_channel(), if chan->batch_base is allocated
faild, we should free chan before returning NULL.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: Ia652c334aead592429c1171da73d67160879686d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8301
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Upcoming patches will add accel_fw support for batching this cmd
and then vectored versions later along with accel_perf to exercise
them.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I59f577f4365fbf063d7419cc6052e10c998b58bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8143
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Was using reserved field. Similar fix to what was done earlier
for direct submission of crc32c operation.
fixes#1972
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie9867e72f60c7f38aa1af0273a036f34580ed4c6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8145
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
To match regular sumission prep function and allow caller to
modify both descriptor and completion structures. Also allows
for more accurate error reporting. Needed for upcoming patch to
fix batch CRC submissions.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4b7b5b24e2f54149b513d4b23ba32f3802aff3e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8144
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Upcoming patches will add support to the accel fw, the idxd engine and
the accel_perf tool. Also following will come vectored support and
batch versions.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie0fbd4b8da9f727426000898c0b511587adac65b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8139
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Perf improvement, directs DSA to write to cache as opposed to
mem.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I0d6ba157af8f1b54f8aae3b8e54a6f7754e4a9de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8169
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We already keep a list of outstanding completion locations to
poll and were previously polling all of them. New ones are
added at the tail and we poll the oldest first from the head
so if we break when we find a slot that hasn't completed we
can get more work done while the HW finishes. This is a proven
performance improvement in limited testing.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icc15041605586f9a31435d447d253c381c00b1f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8161
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Was using reserved field in CRC to store the final address of where
to put the result, this not legal. Move to the completion record
and slightly re-arrange the struct to keep it at 96 bytes.
Refacorted the IO prep function so the caller can udpate both the
descriptor and completion records instead of continuing to add
parameters to the prep function for opcodes that need something
unique in the completion record. This also allowed for a minor
fix where the prep function was returning NULL when vtophys failed
which would have indicated busy as opposed to failire. Now we can
proprely fail that path.
fixes#1929
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic23bc7b68bdd5757c30b7963880677f423368e20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Not just one with extra available info. Also remove the extra
read of the error register, not required.
fixes: #1927
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I28badb45d8cc8d16b72f7019bd2a2044998fc402
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7729
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Purpose: We will also support the kernel idxd driver, so we do not
need export this feature in the module file.
Change-Id: I965e031497920f527962ba187bccd81de6977b8f
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6ad71a65244526e99a36920c630096cc9739d94d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7809
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: This patch is used to prepare to add the kernel
idxd support later.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: If89665f95d622c7342ab75050664158ec6fc615a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7330
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch is used to update the field definition related with
work queue in the header file.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I68b81d9dfc2497db89e96f0730785be03dcb8add
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Add print to confirm how groups/queues/engines are being
programmed based on the init RPC used.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic9462c19c6899478a803433f90d9db9249dd5ca1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Developer convenience - make this based on a specific version.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I228b8aff6e8957cad5e8c1fae5615b113e16cfb5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5950
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
In the completion handler there's no need to do an MMIO read
unless the completion record indicates there's an error.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic4850d803a23413f9813da30ac6f1b611804f1b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5847
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For flow control reasons we have to resize the bit arrays we
use to manage flow as channels come and go. However since
channels are assigned to devices, until the channel count
reaches the device count there's no sharing so no resize of
the array is needed. So, when we use a device for the first
time there's no need to run through the rest of the channels
and re-balance.
Same thing is done on destruction. The code to free idxd
specific resources was moved from the rebalance function to
the idxd put channel function which is a much more logical
place for it as well.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib4df163286906f413dd6429dc6833af7b68e208c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5846
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Config #1 remains what is shown as an example in the spec. Change
config #0 to just have 1 work group and 1 work queue all backed
by 4 engines. As the majority of initial use cases will not be
implementing separate priorities and/or different back end
targets (mem, pmem, etc) having just 1 group and work queue makes
the most sense as it allows the silicon to decide which engine to
use.
Also, having multiple work queues spreads out the available
entires such that if we're not using all of the work queues then
we're not using all of the resources. As channels are created
they are assigned the next available device. As a channel is
assigned a device that is already in use it will round robin
work queues. If then, for example, we have 16 devices then only
the first work queue will ever be used for the first 16 threads
which seems and if there are even just 2 work queues per device
it would take 32 threads to use all of the resources at the
device.
By haing just one work queue per device we always have the max
number of work queue entries available regardless of how many threads
are being used.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie15ff6bdea12525fe3bfc769613084ddd2de50bf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5845
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Suggestions from a prior review... able to remove a boolean by changing
how the batch elements 'index' and 'remaining' are used.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I273e5e231bb30d51eb3ae0a59eec110377d49ab7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4813
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Earlier refactoring enables us to not have to keep track of batch completions in
the batch struct as they're always used sequentially now so we can just add
the addresses from the start up to the number of elements in the batch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I00cdcdec3376a1c32c9dab72c68fea868c1cb540
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4810
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
And to eliminate an artificial constraint on # of user descriptors.
The main idea here was to move from a single ring that covered all
user descriptors to a pre-allocated ring per pre-allocated batch.
In addition, the other major change here is in how we poll for
completions. We used to poll the batch rings then the main ring.
Now when commands are prepared their completion address is added to
a per channel list and the poller simply runs through that list
not caring which ring the completion address belongs too. This
simplifies the completion logic considerably and will avoid
polling locations that can't potentially have a completion.
Some minor rework was included as well, mainly getting rid of the
ring_ctrl struct as it didn't serve much of a purpose anyway and
with how things are setup now its easier to read with all the
elements in the channel struct.
Also, a change that came in while this was WIP needed a few fixes
to function correctly. Addressed those and moved them to a
helper function so we have one point of control for xlations.
Added support for NOP in cases where a batch is submitted with
only 1 descriptor.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie201b28118823100e908e0d1b08e7c10bb8fa9e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3654
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_submit_copy’:
/home/clear/spdk/lib/idxd/idxd.c:761:5: error: ‘src_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
761 | if (src_nbytes < nbytes || dst_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c:761:26: error: ‘dst_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
761 | if (src_nbytes < nbytes || dst_nbytes < nbytes) {
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
LINK lvol_ut
/home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_submit_dualcast’:
/home/clear/spdk/lib/idxd/idxd.c:806:5: error: ‘src_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
806 | if (src_nbytes < nbytes || dst1_nbytes < nbytes || dst2_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c:806:26: error: ‘dst1_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
806 | if (src_nbytes < nbytes || dst1_nbytes < nbytes || dst2_nbytes < nbytes) {
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
/home/clear/spdk/lib/idxd/idxd.c:806:50: error: ‘dst2_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
806 | if (src_nbytes < nbytes || dst1_nbytes < nbytes || dst2_nbytes < nbytes) {
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
/home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_submit_compare’:
/home/clear/spdk/lib/idxd/idxd.c:845:5: error: ‘src1_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
845 | if (src1_nbytes < nbytes || src2_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c:845:27: error: ‘src2_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
845 | if (src1_nbytes < nbytes || src2_nbytes < nbytes) {
| ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
/home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_submit_fill’:
/home/clear/spdk/lib/idxd/idxd.c:881:5: error: ‘dst_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
881 | if (dst_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_submit_crc32c’:
/home/clear/spdk/lib/idxd/idxd.c:919:5: error: ‘src_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
919 | if (src_nbytes < nbytes || dst_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c:919:26: error: ‘dst_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
919 | if (src_nbytes < nbytes || dst_nbytes < nbytes) {
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
CC test/unit/lib/util/cpuset.c/cpuset_ut.o
/home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_batch_prep_copy’:
/home/clear/spdk/lib/idxd/idxd.c:1108:5: error: ‘src_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1108 | if (src_nbytes < nbytes || dst_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c:1108:26: error: ‘dst_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1108 | if (src_nbytes < nbytes || dst_nbytes < nbytes) {
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
/home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_batch_prep_fill’:
/home/clear/spdk/lib/idxd/idxd.c:1142:5: error: ‘dst_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1142 | if (dst_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_batch_prep_crc32c’:
/home/clear/spdk/lib/idxd/idxd.c:1218:5: error: ‘src_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1218 | if (src_nbytes < nbytes || dst_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c:1218:26: error: ‘dst_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1218 | if (src_nbytes < nbytes || dst_nbytes < nbytes) {
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
LINK iscsi_fuzz
/home/clear/spdk/lib/idxd/idxd.c: In function ‘spdk_idxd_batch_prep_compare’:
/home/clear/spdk/lib/idxd/idxd.c:1255:5: error: ‘src1_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1255 | if (src1_nbytes < nbytes || src2_nbytes < nbytes) {
| ^
/home/clear/spdk/lib/idxd/idxd.c:1255:27: error: ‘src2_nbytes’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1255 | if (src1_nbytes < nbytes || src2_nbytes < nbytes) {
| ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I7f1b01c04e4f7287616c590b652aa5cee26d2901
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4694
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is nothing left here, so remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.
Starting with this patch literal passed to register,
serves as name for the flag.
All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.
Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
The WQ has not been provided a PASID so virtual addressing is not
supported. This worked previously because all test set ups had IOVA=VA.
Change-Id: I6b08714e246a0dc8d5bc0f31efa4b90b601c5b4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Added to the framework as well as all 3 engines. Needed by apps
in the event that they have to fail following the creation of a
batch, allows them to tell the framework to forget about the batch
as they have no intent to send it.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id94754ab1350e5a969a5fd2306bd59c38f0a0120
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3389
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also one small bug fix w/compare in accel_perf as a result
of changes made in accel_perf sicne base compare was added.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id8e67bd9de9cbd006ac148f4a77807cc3e8e662b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2958
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This patch only includes the basic framework for batching and the
ability to batch one type of command, copy. Follow-on patches will
add the ability to batch other commands and include an example of
how to do so via the accel perf tool. SW engine support for batching
will also come in a future patch. Documentation will also be coming.
Batching allows the application to submit a list of independent
descriptors to DSA with one single "batch" descriptor. This is beneficial
when the application is in a position to have several operations ready
at once; batching saves the overhead of submitting each one separately.
The way batching works in SPDK is as follows:
1) The app gets a handle to a new batch with spdk_accel_batch_create()
2) The app uses that handle to prepare a command to be included in the
batch. For copy the command is spdk_accel_batch_prep_copy(). The
app many continue to prep commands for the batch up to the max via
calling spdk_accel_batch_get_max()
3) The app then submits the batch with spdk_accel_batch_submit()
4) The callback provided for each command in the batch will be called as
they complete, the callback provided to the batch submit itself will be
called then the entire batch is done.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4102e9291fe59a245cedde6888f42a923b6dbafd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2248
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Dual-cast copies the same source to two separate destination buffers.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icadae34a75c35e2db672a193287b147416012a5a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2129
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Also, while we are here, consolidate setting SO_SUFFIX to one spot.
Previously, it was possible for a library to slip through
without an SO version.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4db5fa5839502d266c6259892e5719b05134518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
