This RPC was deprecated a couple of releases ago.
bdev modules now each have their own RPC for deleting
bdevs. Due to how bdevs are created differently on
different modules, it is simply not possible to
have one delete_bdev RPC that would work for all bdev
types.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia46c95dce6e35f7557e8d41c41b8fea382924547
Reviewed-on: https://review.gerrithub.io/c/442615
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Default 'unmap' option stays as it was.
'Write_zeroes' comes useful when one wants to make sure
that data presented from lvol bdevs on initial creation presents 0's.
'None' will be used for performance tests,
when whole device is preconditioned before creating lvol store.
Instead of performing preconditioning on each lvol bdev after its creation.
Change-Id: Ic5a5985e42a84f038a882bbe6f881624ae96242c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
At this times documentation give impression that decouple call
removes all dependencies for lvol. Meanwhile it only removes
a single one.
Change-Id: I2b769d47dc93a21a0331248e21059653bd741074
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442848
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add prchk_reftag and prchk_guard to construct_nvme_bdev RPC.
In spdk_rpc_construct_nvme_bdev, create prchk_flags based on them
and pass it to spdk_bdev_nvme_create, and in spdk_bdev_nvme_create,
pass it to create_ctrlr.
A single option enable_prchk may be enough but add separate options
for reftag and guard to clarify that apptag is not supported yet.
The next patch will make per-controller PRCHK options configurable
by .INI config file.
Change-Id: I370ebbe984ee83d133b7f50bdc648ea746c8d42d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443833
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
I think this wording is slightly more clear.
Change-Id: I9fc500b8b87c0520bdf96e6c5db490bb98121da3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The RPC was replaced by set_bdev_qos_limit, but jsonrpc.md
contained declarations of both.
Change-Id: Icd636199b8af93b545d636377926983e62d38d11
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442730
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
trace_record is used to poll the spdk trace shm file
and store new entries from it to another specified trace file.
This could help retain the trace_entires from the overlay of
trace circular buffer
Note:
* trace_record reads the input tracefile into a process-local
memory and writes trace entries to the output file only at shutdown.
* trace_record can be shut down on SIGINT or SIGTERM signal.
A usage sample is:
./spdk_trace_record -s bdev_svc -p <spdk app pid> -f trace.tmp -q
Change-Id: If073a05022ec9c1b45923c38ba407a873be8741b
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/433385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This RPC doesn't really work in some cases - for example,
trying to delete one NVMe namespace bdev from a controller
with multiple namespaces, or just one virtio SCSI device
from a virtio-scsi controller. We've previously kept it
and marked it as "debugging only" - but every bdev module
has its own RPC method now for deleting what it constructed,
so keeping the generic delete_bdev RPC is asking for
trouble in some of the cases mentioned above. We'll remove
it in the 19.04 release.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I639254b32a3e1c840a4e9ae2658c42f4f321b676
Reviewed-on: https://review.gerrithub.io/c/442616
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ie042df61e6fbae583cffb5022d3e26ca078f67fb
Reviewed-on: https://review.gerrithub.io/c/442558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was marked deprecated in 18.10
Change-Id: Id47e770b0388c935fe684aeef7a9824f24cef47f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442416
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add new RPC method for OCF bdev: get_ocf_bdevs
It is useful in respect to not registered OCF bdevs
which do not appear in standard get_bdevs call
Change-Id: I8a5fc86a880b04c47d5f139aa5fa4d07ca39c853
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch addes a new description of limitation for multiple
process usage.
Change-Id: Iaa66baf2eea3d444b29658fd4aa357ee23c7c937
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Added FTL module user guide including setting up QEMU for Open Channel
drive emulation.
Change-Id: Ic9b46552ba99a2180a9f72e8c08e876edcecd39d
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441736
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds FTL bdev. RPC scripts have been updated to allow for
creation and removal of FTL bdevs.
Change-Id: I82a5c5033b65bbeb67c238cae969a68cff767dcc
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431329
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds RPC calls for histograms in bdev layer.
Following calls are added:
- enable_bdev_histogram - enable/disable histogram structures for specified bdev and each of its channels.
- get_bdev_histogram - merges histograms from all channnels and encodes histogram as base64
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ib423a919dc1cde7dd7d92247db5482cfb9d66956
Reviewed-on: https://review.gerrithub.io/c/433573
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some users require to do write zeroes operation when
erasing data on lvol. Currently the default method is
unmap. This patch adds flag to spdk_rpc_construct_lvol_bdev
call that changes default erase method. This is also a base
implementation for possible future function for erasing
data on lvol bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8964f170b13c2268fe3c18104f7956c32be96040
Reviewed-on: https://review.gerrithub.io/c/441527
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch adds the RPC support for the Read/Write separate
bandwidth limit controls. The basic usage as following:
usage:
rpc.py set_bdev_qos_limit [-h] [--rw_ios_per_sec RW_IOS_PER_SEC]
[--rw_mbytes_per_sec RW_MBYTES_PER_SEC]
[--r_mbytes_per_sec R_MBYTES_PER_SEC]
[--w_mbytes_per_sec W_MBYTES_PER_SEC]
name
positional arguments:
name Blockdev name to set QoS. Example: Malloc0
optional arguments:
-h, --help show this help message and exit
--rw_ios_per_sec RW_IOS_PER_SEC
R/W IOs per second limit (>=10000, example: 20000).
0 means unlimited.
--rw_mbytes_per_sec RW_MBYTES_PER_SEC
R/W megabytes per second limit (>=10, example: 100).
0 means unlimited.
--r_mbytes_per_sec R_MBYTES_PER_SEC
Read megabytes per second limit (>=10, example: 100).
0 means unlimited.
--w_mbytes_per_sec W_MBYTES_PER_SEC
Write megabytes per second limit (>=10, example: 100).
0 means unlimited.
Change-Id: I822ec4814d21adff9826ce03a6af3783b1b98f44
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/417650
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added set_read_only_lvol_bdev() RPC that marks
lvol bdev as read only.
This enables to create clones off of a base lvol,
without having to create additional lvol bdev with snapshot.
Change-Id: Ic20bbcd8fbebcef157acce44bfa1da035b0da459
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We currently support both RDMA and tcp transport,
so need to revise the user guide doc to add some TCP
transport info.
Change-Id: Ic110a5c2ed1a678706adb5a80fc93bd6520c036d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/438482
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch introduces core structures required for implementing FTL on
top of Open Channel drives. The Open Channel specification describes raw
access to the media on the SSD. The FTL consumes that API and exposes a
block device interface.
The implementation is based on the revision 2.0 of the Open Channel SSD
specification.
Change-Id: Ie306cdfb7920df3b02233fcb60896745f3184cdc
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431321
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are some patches to linux kernel for separating
out discard IOs that are written to /proc/diskstats and
the various /sys/block/*/stat files. The following additional
fields were added to these files:
Filed 12 -- # of discards completed
Filed 13 -- # of discards merged
Filed 14 -- # of sectors discarded
Filed 15 -- # of millisecond spent discarding
SPDK could provide these raw information to bdev_io_stat. Users
can use these information to calculate more states of block device.
Signed-off-by: Yanbo Zhou <yanbo.zhou@intel.com>
Change-Id: I517d67f0ff0159baf04e24732a8fd0ccefcb9c46
Reviewed-on: https://review.gerrithub.io/c/439057
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Since VPP can be linked with any SPDK application which
wants to leverage user space TCP/IP stack. Currently,
both iSCSI target and NVMe-oF target(TCP transport) can
use, so we need to create a separate page under general part,
which will be much better instead of putting in iSCSI target
user guide section.
Change-Id: I3c80e935a230cb42c669f65e5bb12b54ecc9527a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438372
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The header file include/io_channel.h no longer exists.
Message passing infrastructure now is abstracted by thead.h.
Change-Id: I2fd6826d614ef5910787477eed75e81449625241
Signed-off-by: WangHaiLiang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/436118
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
This doesn't work and makes the documentation unviewable on mobile. For
now, remove it and display the desktop version which is small, but
works.
Change-Id: I3bd0df759d7ad9e1c052a7573d4937391ce5b595
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/436411
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When the caller of the RPC API has all the necessary information about
how to access a Ceph cluster, then having to create configuration
files before calling the RPC API is problematic (has to touch files
owned by a local admin, changes must be removed again).
But having to encode support for certain configuration options in SPDK
is also problematic, because that might change depending on the
librados version.
The approach taken here is to merely pass through arbitrary key/value
config options. Existing config files are ignored when that happens.
The caller of the RPC then has full control over the connection setup
and can be sure that he does not inherit settings from a local file
accidentally.
In addition, user management is supported now, with or without a
config. This is useful for accessing a volume with a less privileged
user. Previously, passing NULL to rados_create implicitly chose the
"admin" user.
Change-Id: I5e7f36092df663a3d7ac503c04fc624a8fe1208e
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Reviewed-on: https://review.gerrithub.io/430460
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We will keep the RPCs for now but mark them deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0407dcb392ea0c9e89c0f26cd5670aed2dbfadef
Reviewed-on: https://review.gerrithub.io/435345
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This change should be merged after
https://review.gerrithub.io/#/c/spdk/nvme-cli/+/426943/ which changes
the configuration file.
Change-Id: I4311e5bc511d02ef0543c6a4707b587bc77f1a58
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/433533
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
