One of the messages we send on memory hotplug event is
SET_VRING_BASE, which tells vhost e.g. the position in
a vring it should start processing requests from. Sending
this message with any outstanding I/O could cause that
I/O to be never processed as it could be at a vring
position that won't be practically polled.
To fix the above, we don't send SET_VRING_BASE message
on memory hotplug event anymore since it's completely
unnecessary. It was sent together with a couple other
messages that would reinitialize the vring, but we know
vrings occupy a memory buffer that won't be hotremoved
during vring lifetime. We also know that vring GPAs will
never change. Hence we can initialize the vrings just
once on device start now.
We still need to send SET_VRING_ADDR after updating the
memory table, as rte_vhost depends on it to apply that
new memory table. Luckily, this single message doesn't
cause us any trouble.
Change-Id: I2125099f1cf3f8c76e8160ec819bd1a9a3e7823c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439436
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Makes the code slightly more readable.
Change-Id: Iebf8fb07bceacf433d4bdad0a30419a3faab7eee
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439370
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This follows the same trend as the mem_map APIs.
Currently, most of the spdk_vtophys() callers manually
detect physically noncontiguous buffers to split them
into multiple physically contiguous chunks. This patch
is a first step towards encapsulating most of that logic
in a single place - in spdk_vtophys() itself.
This patch doesn't change any functionality on its own,
it only extends the API.
Change-Id: I16faa9dea270c370f2a814cd399f59055b5ccc3d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As a part of cleanup they're replaced by a device-agnostic
attach API, which is easier for us to manage.
Change-Id: I2ec68f20ba209f02ee5c2de4b6fe5330a4bc0853
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/436480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We need to resend SET_MEM_TABLE whenever memory
is hotplugged or hotremoved.
Change-Id: I9bdc975f11b07866122bc49b9cf372071c5370f2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/422582
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Many functions were inconsistent in regard of error codes
they returned. In a couple of places we could print "Operation
not permitted" via strerror() from functions that were
supposed to return negative return codes, but returned
`-1` instead. (-EPERM == -1)
Change-Id: I7c36e54d449352dbd8036746e4f44a65c9b1d0b3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/419007
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We need to decrement the free_cnt before checking
if it reached 0.
Note: the vq_free_cnt overflow is asserted at the
beginning of the function.
Change-Id: I655217785e4425d1cd3c704d24321b643be55dcf
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420584
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
We didn't handle vq alloc or init failure, because
queues are initialized all at once on device init and
if one vq fails, all of them are to be destroyed.
This behavior is really unintuitive, and with the
latest changes we have a possible segfault scenario.
(We could spdk_dma_free() a buffer that failed to
allocate).
It is now required that the queue allocation function
cleans up after itself.
Change-Id: I6cd1d30c710eb9266288905ab982db363f972a1d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/419001
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The spdk_dma_zmalloc guarantee about physical memory contiguity
is about to be removed soon. For hardware rings that require
physical memory or IOVA contiguity we will now enforce hugepage
alignment and size restrictions to make sure they occupy only
a single hugepage.
Change-Id: I8f44ad6f33d60f01403cc3db693497e4f722e528
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/418612
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It's not required. We only use it in virtio-pci.
Change-Id: I61e95d680d00fa3d56ebccbc9a372db7e1db296d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417002
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Right now both virtio-pci and virtio-user allocate
the queue via spdk_dma_malloc, but that's about
to change soon.
Change-Id: I3acdad45cd9a0639f9070bc448fdf8f9d2c706c0
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417000
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was omitted in the original implementation and the
`del_queue` callback wasn't called anywhere. For virtio-user
we open some eventfds on queue creation and until now they
were never being closed.
Change-Id: Iee1ced1e17a59d5cb13449538c115678a1c1a328
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/416999
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The device might not have this message implemented.
Sending it could result in a connection being terminated.
Change-Id: I53c08f1108ebc7de630569f3983c317cc6510fa4
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417636
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For vhost-user it's a protocol feature that can simply
be not supported. The subsequent patch introduces an extra
check that may cause config read/write to fail.
Change-Id: I5b0e11845fb6021472c608477f1797dada8ab961
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417458
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
It was introduced a while after the original GET/SET_CONFIG
implementation in QEMU, but within the same QEMU release (2.12?).
It is required by the vhost-user spec. Rte_vhost doesn't check
it, so everything worked so far, but other implementations
might (and should) reject our GET_CONFIG requests right now.
As a part of this feature, we should also check the same
flag before sending GET/SET_CONFIG messages to respect those
devices that really don't implement F_CONFIG. This is done
in a separate patch.
Change-Id: Ib7e9b11a0074f4aee70609af0cad2ef59a8bf427
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417459
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Required by the vhost-user spec.
Change-Id: Id7143a0f6cc34463ad5f22d8db96ac5c51e04081
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417457
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
rte_vhost doesn't respect those, but any other
implementation should.
Change-Id: Id0a0fa031b7c6e9d572cdffeeb3a1e40d824826d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417456
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We don't support the kernel vhost. Vhost-SCSI is not even
fully implemented in Linux, so there's no point trying.
Change-Id: Ie564d46c497718081dd2a5c28829fdcf88e1c0a0
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417455
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This fixes intermittent failures with QEMU's virtio-scsi-pci
device.
Apparently, from time to time QEMU enters a broken state in
which it doesn't turn off the NO_NOTIFY flag. This flag should
be set only for the period of time virtqueues are being processed,
but QEMU makes it set all the time. This makes us not signal any
I/O submissions - SPDK thinks the device is currently processing
notifications so it will pick up our I/O automatically, but in
realitly it won't and we end up with a deadlock.
I believe kernel virtio driver doesn't hit this issue because of
event index feature. If negotiated, the NO_NOTIFY flag won't be
used at all. Initial tests show that the issue is indeed gone
with this patch.
Event index for SPDK virtio is not particularly useful when using
a poll-mode device, but it doesn't do any harm. It can be further
optimized in the future, but macro-benchmarks don't show any
performance difference compared with the legacy notification
handling so there's no hurry.
Change-Id: I46e8ab0da170780fcdc0dd239208670ee5ed6357
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/415591
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
With upcoming event index patch we will need
to keep track of how many descriptor chains we
have really put into the avail vring. This patch
is a step towards that.
Our virtio layer abstracts away descriptor chains
as "requests". We can start requests, add descriptors
to them, and finally flush them. So far we used to put
any descriptors directly into the virtqueue desc ring,
and made them visible to the device only through
virtqueue_req_flush().
All of our virtio bdev modules currently flush the
virtqueue after adding each single request, but the
docs for the virtio API say it's possible to start
multiple subsequent requests and flush them all at
once. This was conceptually broken so far and only
the last request would be exposed to the device.
It's now fixed and subsequent requests are put
into the avail vring as soon as they're complete
(either the next request is started, or the
virtqueue is flushed).
Change-Id: I76b7db88ab094c38430edd8ff0e65681775dcb31
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/415590
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This `if` came from the original DPDK virtio PMD.
Generally, we do not want to trigger cache coherency
updates if we don't have to, but in this particular
case we know we always do.
If there were no changes to the avail index, there
would be no requests started and the function would
return much earlier.
Change-Id: Ic1231cf82288c1cb95dc89346f54d51849b8bae9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/415589
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Once enabled, this DEBUGLOG would be printed
every poller tick. It's not practical, so it's
being removed now.
Change-Id: I8627dedcc2c0df8065ffe575059938d620491dd5
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/415588
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Although contiguous, memory regions may appear as separate
/proc/self/maps entries.
This patch brings support for DPDK 18.05.
Change-Id: I91eb8adc2c073a103f687320ec7b9dabe1e066b3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/413167
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no way to recover from this.
Change-Id: I1667b032bab867d58ad23fa8b1bd59f81620b442
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/408246
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
It actually returns the size of given queue,
so renamed it to get_queue_size to clean up
the API
Change-Id: I88551116b3dc19644764bba78b58444802a1d443
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/408174
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The new construct_virtio_dev allow creating virtio SCSI and blk for both
PCI and user transports.
Change-Id: Ibd79c4fb75e3cbd993b46227d86e915c1b740a18
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405419
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All errors were being silenced in an upper virtio layer.
This patch makes them properly propagate further.
Change-Id: I289c810ff0f670c4ba1fbcf0804089639fa561a8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405918
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This protects against brute-force initialization that virtio
is not really prepared for. Most importantly, this behavior
makes us Virtio spec compliant (3.1 Device Init.).
Change-Id: I6d26f3d8b5cce488a71068777531b78538489662
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405917
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is required by the Virtio spec. (3.1 Device Init.)
It will also help us with vhost-user error handling.
set_status() doesn't have a way to return an error, so
its internal failures were silenced until now. When we
exceeded max memory region count (8) we only printed
an error message without failing any SPDK initialization.
This patch fixes that. It also removes not-particularly-
useful comments in virtio_dev_reset().
Change-Id: Ibe0010c493ef4e12e1fdd0a1679bf706f298d97e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405915
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
g_virtio_driver contained just a list of all
Virtio-SCSI devices. It's now being removed for
two reasons:
* it's backend-specific, doesn't fit a generic virtio lib
* it's difficult to ensure thread-safety for it
Virtio bdev modules will now manage their Virtio
devices by themselves. Virtio-SCSI has now an internal
device list. (And VirtioBlk module maps devices to
bdevs 1:1, so doesn't need any additional work here.)
Change-Id: I3bc68d76d6904df5c56f00fca7ab387871ecf88f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405179
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will let us e.g. read device blocksize in the
upcoming vhost-blk initiator. All the public API
was already there - we've been using it for
virtio-pci. Now we're making use of it for vhost-user
as well.
Change-Id: I39eab820bb9bbff59c8b8efa79cc97d2ec7806fd
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/398828
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The kernel vhost target enables notifying after processing
each interrupt in a following manner.
* unset NO_NOTIFY flag
* mb()
* check avail ring for slipped requests
And we do the following after issuing each I/O.
* update avail ring
* check NO_NOTIFY
If NO_NOTIFY check is reordered and read first, we might read
old `true` value, and avail ring might be updated after the
kernel has already done its check. This easily leads to deadlock.
Change-Id: I6bb4490775dfed6fb2987e97c39b713054ae26ad
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396499
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These didn't make much sense anyway.
Removed them so there's less code
Change-Id: I3247c640b13e5847b5f6d822072b63cad269ac8c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/398467
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
virtio_dev_get_status may result in an MMIO read,
which is quite expensive. Removed it to improve
performance on debug builds.
Change-Id: Ibe2d13ad381f02f8d258d630283c14ce20b7a340
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/398468
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously vdev->name was being allocated/freed
separately in virtio_pci and virtio_user backends.
Now it's all done in generic virtio library and
cleans up some code.
Change-Id: I810e976d09781c0c9b25c6f7fd957a83aad6c7b8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394704
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is just the API introduction. See subsequent
patches for its RPC usage.
Change-Id: Iadb7c9bf6a56ab4330c9f2215c6006a2935d208d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394445
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In current bdev_virtio_scsi PCI enumerate callback
implementation we rely on a global variable - a global
list of virtio devices. We do not need any opaque
context data inside this callback just yet. It will
be required to add virtio devices in runtime. See the
next patch for details.
Change-Id: I116cbd3bd633f56922eedcc7c07b8c0310e51d49
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394444
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch remove need for additional buffer when translating error code
to string.
Change-Id: Iaa60088b5c450581d3cdddbb425119b17d55a44b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386114
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Distinguish between "not enough descriptors available"
and "iovcnt > queue depth".
This patch brings back I/O re-queueing for virtio bdev
module. It was temporarily disabled by 451de7e1 [1].
[1] 451de7e1: "virtio: switch to the new virtqueue API"
Change-Id: I4c4f6a6d9d91373ee647ea7cafd53ad999aa6aa2
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393447
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This gives user an information of which
device caused an error.
Change-Id: I47eb1c1b6c9adc36a9c26b4c36b6f6bc1e467ca7
Suggested-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388195
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make them usable for other Virtio drivers
(not just SCSI).
Change-Id: I7ae2c43f311fefd40e447c8b5accaf824d0e23de
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393121
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously we used to manually set
vdev->max_queues and called virtio_dev_restart
to go through all virtio init states, negotiate
features and allocate virtqueues. This is,
however, insufficient for Virtio-Blk, where we
e.g. need to check against negotiated multiqueue
flag before deciding how many queues we can use
(reading num_queues field from device config is
forbidden unless VIRTIO_BLK_F_MQ is negotiated).
This patch refactors queue-num related code
and also removes various restrictions. If device
supports less queues than requested, a warning
will be printed during initialization, but
the device will now continue to init normally.
The queue-num negotiation for virtio-user should
be eventually moved to upper layers, but that is
not necessary for now.
Change-Id: I418b56fa62c17b547243422ea077f0d76555bd13
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393087
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previous descriptor chain was being corrupted
by setting invalid vq->req_end (virtio.c:538).
Change-Id: I4b27db02dc990e6af011a1b614e30e3050379e9f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392774
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Exported lib/bdev/rte_virtio as a separate
library not dependent on bdev.
Virtio is now accessible via spdk_internal/virtio.h.
The header is marked `internal`, as it's
not meant to be used by end users. It's
not handy to handle all backend-specific
(e.g. Virtio-SCSI) logic in a user code.
For now the Virtio interface is publicly
exposed only via bdev_virtio module. We
might want to consider adding a separate,
public Virtio-SCSI library in the future.
Note: this patch doesn't do any changes
to the virtio code. Everything is
moved 1:1.
Change-Id: I805e5d12d265d82b0bc5784c89fbadb81abdb278
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388166
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
