In store_last_run_counter(), history->poller_name is set to
strdup(), which may return NULL. We should deal with it.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: Ice5f27c4a7d2f9abd528b97a48ff5f92b48c8d7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8306
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In spdk_fs_create_file_async(), file->name is set to strdup(name).
We should check whether file->name is equal to NULL.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: I2219cc353eb4711290aee2599505f57af9088bb2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8302
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In blobfs_fuse_start(), bfuse->bdev_name and bfuse->mountpoint
are allocated by calling strdup(), which may return NULL.
Here, we will go to err if strdup() returns NULL.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: I0599254b3436a310ddd26732312281f07a4972ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8303
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If iscsi initialization fails (due to a memory allocation
failure for example), we may not even get to the point
where the g_iscsi global is registered as an io_device.
So then when we tear down the iscsi library using
spdk_iscsi_fini(), we need to make sure we don't
try to unregister g_iscsi if it wasn't registered.
For now, just use the g_init_thread global to make this
determination - it's set just after we register the
io_device.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic9443564ef67b9c0df0fce47a346f4608749c306
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8351
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Because we use spdk_dma_malloc, then it does not init
the the contents in the memory.
Fixes#1996
Change-Id: Ieef411f6ae5114de9f732df6096e0bb123efb7e0
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8374
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
In spdk_nvmf_subsystem_add_ns_ext(), ns->ptpl_file is set to strdup(),
which may return NULL. We should deal with it.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: If95102fe9d6d789b8ba9e846c4d7f4e22e48a93c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8305
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We face the checksum error when using idxd hardware in vector mode because
we put fields of internal function in wrong union.
When use vector crc32c operation, seed and chained functions and cb's will
be used in the same time, so we should not put them in the same union.
With this patch, we can fix the crc32c computing while using
the vector mode with iov_count > 1.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7097b47294ffd5dcac7d7a83d583321a73dc50d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8213
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nbd will be closed in nbd poller function asychronously.
Unify the stop process of HARDDISC and SOFTDISC in same place.
Prepare for following patch.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ida33ff6d081e68290cfa393c0c47fe7af545958b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8036
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
For receving the pdu, we add the crc32c offloading by Accel framework.
Because the size of to caculate the header digest size is too small, so
we do not offload the header digest.
Change-Id: If2c827a3a4e9d19f0b6d5aa8d89b0823925bd860
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7734
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The .get_zoned_model() callback is supposed to reject unsupported
file types. Right now, we do not reject unsupported file types.
For our specific ioengine, this isn't strictly needed, since our
ioengine unconditionally sets f->filetype to FIO_TYPE_BLOCK, and if
it fails to find a SPDK bdev that matches the --filename, it will
return an error that it couldn't find the bdev matching filename.
However, all .get_zoned_model() callbacks in the fio in-tree ioengines
have a check that a given file has a file type that is supported by
the ioengine itself. This is needed since they do not set f->filetype
themselves, but instead let fio generic code initialize f->filetype.
Since we reuse --filename to mean something in the SPDK namespace, we
are force to initialize filetype manually. So that is the only reason
why we know that the file type will be FIO_TYPE_BLOCK. Anyway, let's
try to keep our code as similar to the in-tree ioengines as possible.
The SPDK nvme ioengine already has this check, so adding it in the
SPDK bdev ioengine makes our ioengines more consistent as well.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ib5e19c738dea0f8d41641b63d0fabe055a930827
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8329
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
fio will do certain actions depending on the backing file
type of the target that it runs against.
(E.g. if the zbd code in fio detects that the backing file
is FIO_TYPE_FILE, it will emulate zones inside the regular
file.)
Both SPDK ioengines reuse the filename option to not point
to an actual path exposed by the OS, but to instead point to
a device in the SPDK namespace.
Because of this, the file type detection in fio will fail,
and will always initialize filetype to FIO_TYPE_FILE.
Therefore, the SPDK ioengines will need to initialize
f->filetype themselves.
The SPDK nvme ioengine already initializes f->filetype to
FIO_TYPE_BLOCK unconditionally. Do the same in the SPDK
bdev ioengine.
(Just like in the SPDK nvme ioengine, we also need to call
fio_file_set_size_known(), so that fio generic code does
not try to initialize f->real_file_size.)
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I37df185524ed262cb875105f989685b740b430a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8328
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The .get_zoned_model() callback is supposed to reject unsupported
file types. Right now, we only reject FIO_TYPE_PIPE.
However, in attach_cb() our ioengine unconditionally initializes
f->filetype to FIO_TYPE_BLOCK. This means that the only file type
that our ioengine supports is FIO_TYPE_BLOCK.
Therefore, fix spdk_get_zoned_model() to reject everything that
we do not support.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I115bb8ff9c8ea9f647baebc0196900681a36c410
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8327
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The define ZBD_IGNORE has been removed from upstream fio.
fio will now return an error if --zonemode=zbd is used with a
--filename that points to something that is unsupported by either
the zbd code in fio or by the ioengine itself.
ioengines are now supposed to return -EINVAL for unsupported files
(instead of returning 0 with ZBD_IGNORE for unsupported files).
This change does not need any special ifdef FIO_IOOPS_VERSION check.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I7bec0b1f5dc8f166ebf683f6f3937b2ef295a21e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
siginfo_t is a GNU extension. SPDK (and DPDK) have
direct dependencies on GNU extensions, but it's a bit
nicer if external modules don't also need to define
_GNU_SOURCE. Currently siginfo_t parameter in the
spdk_pci_error_handler is the only thing that violates
this.
Note that DPDK also supports registering sigbus handlers,
but they take the failing address as a parameter instead
of the full siginfo_t structure. Let's adopt the same
for SPDK.
While here, remove an extra semicolon that was just after
the virtio sigbus handler function signature that was
updated in this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I07faf11a3ac3589c637cb2196581c102286b1e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8333
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
'typeof' is a GNU extension - let's use __typeof__
instead which is ISO C compliant.
Allows building SPDK header files with -std=c11 as
long as _GNU_SOURCE is also defined.
Next patch will enable omitting _GNU_SOURCE as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibd6c984627b553d6f87f302800abc52157fe9b1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8332
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The lcore id, idle time, busy time, thread count and poller count
mismatch in refresh_cores_tab() and show_core(). The index of
g_cores_history[] should be lcore id.
Change-Id: I0e95a49b2660f64c3601d5e520c6daab3aa9925b
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7855
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
At this time only main lcore frequency is changed,
depending on its load either up or down.
Exception is when at least a single busy thread is present
on non-g_main_lcore. Then the main lcore frequency is set
to the maximum possible.
This patch moves when that is determined, from 'moving'
logic to one that sets reactors to interrupt mode.
If at least one thread is present on non-g_main_lcore,
it has to be busy. Otherwise it would be placed on main lcore.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2900598afe53fb609e1f06a60d5245f74511e1c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8050
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This field was only used to keep track of number of threads
that will be present on a core after scheduler moves.
It was used only internally within scheduler_dynamic.
Event framework has no need to keep such field in core_info.
Instead added field in cores_stats internal to scheduler_dynamic.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3ce74d4a25eac81e58da8705a1c4553730fc1e57
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8049
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added core_stats structure that will hold stats modified
during balancing.
Further patches will modify the values in this structure,
to for example judge how much execution time a core
has left.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib8e611e36642c4543b5cb43bc2695c613d38f0fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6657
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch expands spdk_scheduler_core_info with two new
fields that will contain core stats only from last scheduling
period.
This will make sure that schedulers do not have to keep track
and calculate this value on their own.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3aa7dfa6a60c1d14d95a0e684e84c2e83f0a4496
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8048
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
(a5ad0f80) lib/event: update reactor tsc_last going poll mode
Patch above updated the tsc_last at the very end of changing
interrupt mode of the reactor.
The flow for turning from interrupt mode to poll mode is
first to send an event to the target lcore, then to iterate
over all reactors updating notify_cpuset on each.
Previous patch updated the tsc_last after notify_cpuset was
updated, meanwhile the threads could already been put on it.
This patch moves it immidietly to the point of changing
the in_interrupt state.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6aea252016f4706369b8b597b765593bc6edca3b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8111
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Renamed core_busy_tsc and core_idle_tsc to better
describe that they contain particular core stats for
its whole lifetime.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6f16b2b0a162aad8fbaf18f549fc50a2372b920b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8047
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
There is no need to keep new_lcore field.
lcore value is enough to determine the target core.
Meanwhile _threads_reschedule() can see if the target
core matches the one from core_info.
Removed _spdk_lw_thread_set_core() since it did not
serve much purpose.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I82c7cfebf1107b4a55b2af9b891052084a788907
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8046
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
lw_thread->lcore was set during gather_metrics,
rather than just after the thread reschedule.
This patch just moves it to the right place.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0477830902f68102e4e4f0ffc9359bd004a8ad42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7961
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
So far the schedulers had to calculate the diff of
current_stats - last_stats on their own to get tsc
from last scheduling period.
Renamed the current_stats to total_stats, but kept the meaning
as stats describing tsc for lifetime of a thread.
Instead change the meaning of the last_stats to describe
the tsc of only last scheduling period and change its name
to current_stats.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1a165ff7c1afe659b432c3127a351a96878d1f3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7843
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
After reading the code in detail, I think that we should
not set pipe_has_data= true and socket_has_data at the same time.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I8f9f96b16f4f0e0c585877a0dd687a240252a7cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8283
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As of latest qemu (>= 6.0.0) these can now be used together as
different BARs are used to accommodate for both.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Icf32f491fd33ef733f0d946f9b5caaeb87137d28
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8217
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Having pmr_cmdline set to nil was for some reason breaking cmb setup
as weirdly enough pmr_cmdline was ending up being set to "true".
Avoid this by having pmr_cmdline set to some value, empty string in
this case.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ib41da699dcc2f213f0b18d21be3fd32f398bae41
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This would make easier for the 3rd party tooling to adjust env for
the install_* routines.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ib5ea447bc67080f106cc43e005143bd52e91c768
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8122
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Using the CMB for SQs is not a standard use case.
Performance can vary widely when using CMB for SQs
and is typically not the configuration used for
benchmarking.
So let's change the default value here to 'false',
users can still opt-in by setting this option to
true in the spdk_nvme_ctrlr_opts structure prior
to attach.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iab746ba777b04152ffb92fea2a2bb923a0a0bf21
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8227
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Refactor data gathering functions to work per object type
and use more descriptive names.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: Ie49f58b12e705615e9b92141e83306da102511c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7388
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Delete free_data() function, because it is called only once
and contains only three lines of code. This is to make
spdk_top code cleaner.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I78e0edd941e8fb81ac58ea13bdc91148db0a2417
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7972
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch increases initial refresh rate for data gathering.
Initial refresh rate value was originally set to 1 microsecond,
which was too little for some values in tabs to refresh.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: Ideeab28d3c2bbdd1133fa8706c8f2182948d7d5c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
threads_count inside show_core() function takes its value
from first core instead of the one selected by the user and
breaks core pop-up window.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I11710eaf061e7ead0fec46a0f9c47dd84d8d0209
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7588
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Changes number of allocated elements to RPC_MAX_THREADS in *thread_info[]
array inside refresh_threads_tab() to match other refresh functions.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: If62faed463f42f232693f5bdaea70a5bb248891f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7993
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The goal of this patch is to set g_last_pollers_count
earlier than it was originally done to allocate less
memory for pollers array in refresh_pollers_tab(),
which is done in the next patch.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: Id403af9b1c510abd7b6a1ac1742076590b1b37d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7992
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Separates data gathering logic in tabs. Data is now being collected
on a separate thread.
Modified wait_init() and show_stats() to allow for thread creation
when starting spdk_top and thread join when closing.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I54a58522f31f938e2d1275c3a6f60fe8c17b0031
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6368
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
FIxes incorrect cores showing for each thread in THREADS tab.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I661eac0cd70cf6ecf308dafaa940fcae8fd513f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8153
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
QEMU 6.0 by default uses a RedHat dev/vendor ID rather
than the Intel one that has always been used to date.
We need the NVME_QUIRK_MAXIMUM_PCI_ACCESS_WIDTH quirk
so that we do not use wide instructions to copy SQEs
to a virtualized CMB, since QEMU does not support
that.
The NVME_INTEL_QUIRK_NO_LOG_PAGES quirk is only needed
for devices with SPDK_PCI_VID_INTEL, so we do not need
to carry this one over to the new REDHAT entry.
Fixes issue #1986.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3d339b3525e7c6ceb792eb9d143e7a922c19344d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8226
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Set nvme bdev physical block size based value of NPWG and NAWUPF namespace
field.
The logic to set bdev phys_blocklen is based on how Linux nvme block driver
sets it. If the underlying nvme namespace supports NPWG/NAWUPF then bdev
phys_blocklen is set to min(npwg, nawupf)
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I6d254a9e730dccc230b9db4d1217bf7ab2f39b6c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8224
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The NVMe driver layer will clear this log, so we don't
need to send another one in the aer callback.
Here we change the logic to compare with previous NS
state, if the NS state is same it will fail the test.
Change-Id: I6d80cb6a5f6d5eab92b8ccac601a23c19cea4003
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8175
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
The arguments of a tracepoint are formatted when they're printed now, so
there's no need to append ":" or pad it with spaces.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I74f5568f1982dacc079e3b80bd19a9cd740b48ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7955
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The traces record calls to spdk_(get|put)_io_channel() and saves the
reference count of the IO channel and its context. The context, instead
of an IO channel pointer, was selected because the same pointer is often
used in other traces (e.g. nvmf's poll group), so it makes it possible
to match these traces together.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I15fe982a89685d8f6e23d406d6d48f5c2d9d604b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Linking each unit test with spdk_trace allows for getting rid of lots of
stub definitions for the trace functions. The behavior stays the same,
as the trace calls result in no-op anyway because none of the unit test
apps enable tracing.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I904dac92205aadd644100af2c38989bb7979e47c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Both values should provide similar information, while the qpair can also
be matched to the traces from lib/nvmf allowing the user to track the
qpairs across these modules.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iba9abdd3f41b93100c0403b1c90fc4549d39189e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7159
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The traces are tracking the lifecycle of a poll group: creating it,
adding and disconnecting qpairs, and finally destroying the group.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I075b7f24d14b8fbb42bb18ddd70a668a8bace118
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7158
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
