Use old rpc in conf.json to check
if rpc alias if handled properly.
Change-Id: I466e39dd6b4adf140225060e46752250ae30ddb4
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465666
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Not any different from the test_env version in this patch but it will
be in the upcomiong series as the 2MB tests are added as we will need
to manipulate the size param.
Change-Id: I13a7544546b5296421fe5b696c8777e402bacc35
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch introduces new hotplug test which uses
PCIe interposer capable of physically connecting and
disconnecting NVMe drive from the system. It uses
custom build HW based on mircrocontroller to which
we connect and through which we send command to NVMe
interposer to connect or disconnect NVMe drive from
test machine. Scenario of this test is similar to the
scenario we are using for software hotplug test with VM.
Parameters for the test are IP address of the microcontroller
and GPIO pin to which the interposer is connected.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3610dadfd23521da2c90fd83e6895d942b3f66df
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462470
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
perf is under the examples directory, but it's much more than
an example application and probably needs to be moved. We use
the libaio functionality extensively as part of benchmarking
and comparing the SPDK driver with the kernel driver. So we
need to keep this functionality.
This reverts commit b3d9ebae21c5e90ae3dad26a272e003a2e2ef67d.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifb9a1df919d32a98c328101029cc22e91915a976
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466795
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Most of the assignments followed the DIRS-($(CONFIG_X)) pattern, but
there were a couple of assignments using a different pattern.
Change-Id: I7c80fec2813c32cb7676912d72805565f77b2e3d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466469
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The shared object dependencies could easily change over time. It is
important that we keep this list up to date and we don't change
something without updating the makefiles. This script checks each shared
object file to make sure that its readelf dependencies match up with
those specified in the makefile.
Change-Id: If508fb0205e85f8f5d217033194bfb5b0179d11c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466179
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use spdk_nvmf_request_get_buffers() and spdk_nvmf_request_free_buffers(),
and then remove spdk_nvmf_tcp_request_free_buffers() and
spdk_nvmf_tcp_request_get_buffers().
Set tcp_req->data_from_pool to false after spdk_nvmf_request_free_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I286b48149530c93784a4865b7215b5a33a4dd3c3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use spdk_nvmf_request_get_buffers() and spdk_nvmf_request_free_buffers(),
and then remove spdk_nvmf_rdma_request_free_buffers() and
nvmf_rdma_request_get_buffers().
Set rdma_req->data_from_pool to false after
spdk_nvmf_request_free_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie1fc4c261c3197c8299761655bf3138eebcea3bc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a prepration to unify buffer management among transports.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b1c208207ae3679619239db4e6e9a77b33291d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466002
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to unify buffer management among transports.
struct spdk_nvmf_request already has SPDK_NVMF_MAX_SGL_ENTRIES (16) * 2
iovecs. Hence incresing the number of buffers twice will be no problem.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idb525abbf35dc9f4b8547b785b5dfa77d106d8c9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Purpose: Prepare the further optimnization in the
target side whening receving pdu headers, we expect
to use zero copy.
Change-Id: Iae7f9106844736d7160d39d0af1f5941084422ec
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465380
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Some time ago spdk_subsystem_init() used spdk_events as
callbacks, but it was removed.
This patch removes left over UT stubs.
Change-Id: Id25ac8e4e338c172d21161dede6dc046f0860279
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change adds return code to spdk_subsystem_init().
Making it's caller responsible for handling application
state - such as calling spdk_app_stop().
This change implies that start_subsystem_init RPC does not
stop the application on failure, only reports back the error.
Renamed g_app_start/stop variables to now more relevant
g_subsystem_start/stop.
Change-Id: I66a7da6ecfb234a569c65279cc4b210ddac53d2a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is related to issue #815. To avoid hung and re-enable
testing this part of ocf, this patch changes backed device from aio to
nvme.
Hung in this test was caused by implementation of AIO bdev and bdev layer.
All AIO bdevs are using the same shared context with limited queue depth,
so in some cases AIO can return NOMEM status. It's ok when we have more
than one IO from bdev layer perspective, if not we will stuck because
nothing will triger retry io procedure.
This patch only enables testing and are not fixing root cause of hung.
To prevent before unexpected behavior of this and next one test we
need to clear ocf metadata on nvme device.
This patch also reenables this test in CI.
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Change-Id: Ibab4aefb9aaf33d725db20345bd5c09c1e5eebdd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463605
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Track the band under defrag inside the reloc module. This allows for
multiple bands being defragged at the same time (e.g. extra one due to
write fault) as well as makes it easier to handle cases when relocating
a band that has no valid blocks.
Change-Id: Ia54916571040f5f4dfdb8f7cdb47f28435a466d8
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
I think: print_scsi_tmf_io_data() corresponds to SCSI_MGMT_NAME,
print_scsi_io_data() corresponds to SCSI_IO_NAME.
Change-Id: I6c7deb4bb1a86449cea9d077eac6debf39f09532
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466268
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds new interface for opening bdev and
implements new style remove event. With that changes
user can be notified about different types of events
that occur in regards to bdev. spdk_bdev_open_ext
function uses bdev name as an argument instead of bdev
structure to remove race condition where user gets
the bdev structure and bdev is removed after getting
that structure and before open function is called.
spdk_bdev_open is now deprecated.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I44ebeb988bc6a2f441fc6a0c38a30668aad999ad
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455647
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently we *always* wait 2 seconds before starting
controller initialization during attach. This
works around an issue where some older Intel NVMe SSDs
could not handle MMIO writes too soon after a PCIe
FLR (which would be triggered when VFIO was enabled).
After further discussion with Intel experts, we know
the SSD models that exhibit this issue. So we can
quirk this so that only the older SSDs incur the extra
delay.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ieb408c24f6afd5bd5147d1c87239aa20f2d13511
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466064
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
In the event that our fuzz test passes, we should manually remove the
trace files from the /dev/shm directory. This will prevent us from
failing to allocate /dev/shm files when a machine consistently passes
the tests and doesn't reboot.
Change-Id: I2ccde6aba7d61fda3a28ed24e009c6f8f81c20b4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Scan-build on Fedora29/30 reports error, which this patch fixes:
bdev_ut.c:1436:17: warning: The left operand of '!=' is a garbage value
CU_ASSERT(desc != NULL);
~~~~ ^
/usr/include/CUnit/CUnit.h:123:30: note: expanded from macro 'CU_ASSERT'
{ CU_assertImplementation((value), LINE, #value, FILE, "", CU_FALSE); }
^~~~~
bdev_ut.c:1654:17: warning: The left operand of '!=' is a garbage value
CU_ASSERT(desc != NULL);
~~~~ ^
/usr/include/CUnit/CUnit.h:123:30: note: expanded from macro 'CU_ASSERT'
{ CU_assertImplementation((value), LINE, #value, FILE, "", CU_FALSE); }
Fixes#924
Change-Id: Ia7dc6ce066ac80fc45f022eefd43a224d2f11503
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466110
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is more accurate to what they are, and will make defining library
dependencies much simpler. This change in directory does not affect the
final placement of naming of libraries at the end of time.
Change-Id: Ic48a9233dff564e39ce357a9ea0a111ea2b6414b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Run spdk_trace_record once iscsi_tgt is started.
This movement can make sure spdk_trace_record is running
before iscsi_tgt's exit.
Fix issue #908
Change-Id: I4e4420fbd0f7586721c7bc8f13837c25b4470da9
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465847
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In prep for testing the 2MB boundary condition multiple changes
were needed:
* update mocked mbuf function for chaining
* init next pointer to NULL during mbuf allocation
* set and check expected physcal addresses in _compress_operation()
* init iovec values in test routines to more sane values
Change-Id: Icff030e8bef693952f7da66e7aae77e207fbfd40
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465983
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Present since the refactoring on driver init function.
Change-Id: I5b2877f4278b62a9efa53395f6910ef199f2c100
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465981
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Will be needed to add specific tests for crossing a 2 MB boundary
later in this series.
Change-Id: I7404a019ff2f837f54ffdef39c6219e86aa258f1
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove code that was freeing memory in the code under test. It was
no longer needed following a refactor of the init code and was
causing a double free.
Change-Id: I99018587ac12e01d4fe950e0718c23790ce7ce41
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465966
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Update to version currently used on test systems.
Change-Id: Idbc12f0dd089dbe4b0919a936eac8a36020c3994
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465665
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
