Waits up to 2 seconds for a bdev to arrive, if not returns error.
In the next patch in this series this is used and seems like a good
general function.
Change-Id: I3402f34f3dad3d7373973dc785520a5c4e58cd14
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456091
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
we use this statement:
while (g_file->length_flushed != buf_length) {} in
file_length function.
It means that in this test case, length_flushed are
accessed by two different threads, so better to
use another new variable length_flused with volatile
before the variable definition. Then our ut will not hang.
Change-Id: I6152a4ba3f27f0fad1c8c2baa71324a36a2fb9e8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456580
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There's no need to set this every time we allocate
a request.
While here, fix a typo near where we needed to modify
the unit test to remove the qpair assertion.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8af41a6c483415950f625d1ed2ef46088b75a622
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use separate buffers for metadata transfer if bdev supports it.
Change-Id: Ie0fa3d3c1f5b14f99c13f2d6b5b22edc216c6d64
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
vring notification mechanism is transport-specific. At present, vhost
dataplane code in `lib/vhost/vhost.c` triggers guest notifications with
`eventfd_write()` system call. But this is an AF_UNIX specific
notification mechanism. This patch replaces `eventfd_write()` with the
existing generic `rte_vhost_vring_call()` function that is part of
DPDK's librte_vhost public API.
`rte_vhost_vring_call()` takes a vring_idx as an argument to associate
the `struct spdk_vhost_virtqueue` instance with the relevant `struct
vhost_virtqueue` instance. We introduce a new `vring_idx` field in
`struct spdk_vhost_virtqueue` to enable this association. This field is
initialized in `start_device()`. In addition, a stub for
`rte_vhost_vring_call()` is added in the vhost unit test file.
SPDK's internal `rte_vhost` copy will not be updated in order to support
the virtio-vhost-user transport. However, an `rte_vhost_vring_call()`
function is introduced in SPDK's `rte_vhost` in order to have a solid
API. This function is just a wrapper of `eventfd_write()`.
Change-Id: Ic93e25cd3f06e92f04766521bc850f1ee80b8ec8
Signed-off-by: Nikos Dragazis <ndragazis@arrikto.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454373
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Keep an array of iovecs tied to each IO. Internal IOs can have
iov_cnt > 1 without having to allocate additional memory. User's iovec
can now be modified too (e.g. when splitting the request).
Change-Id: Iec73c6dad59acdc331a1461fd7feac085138a8de
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There's no point in synchronously returning an error from ftl_io_write
/ ftl_io_read as they're also reported in the IO's completion callback.
All errors are now reported through io->status.
Change-Id: I4adf4e13221b63715625276042e1172cd63b8f9b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455521
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Some of the internal IOs split the contiguous data buffer into multiple
iovecs to separate the requests. It's unnecessary and can be replaced
by checking the position within the data buffer.
Change-Id: I9255ea0072fee6c4e6a7dca21e4008780bc45610
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This script was getting a bit unwieldy. adding argparse will make it
easier to add more options in the future or to set default values and
validate arguments going forward.
Change-Id: I1ffdbdf2082287ceb8a88cd3eb6ecf9bbd6c9e11
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455724
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This isn't needed, and it actually results in warnings
when linking with LTO enabled.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4e7dcd5d3f738fb3e53e35a1fff154a0e1ab06d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456238
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Existing code in spdk_bdev_write_zeroes_blocks() will call spdk_bdev_free_io()
for the error case, which will cause assertion because the bdev_io isn't
submitted to the backend yet, so we will check the condtion first to
avoid the error case.
Change-Id: If27d78217f709a3315e74c00869d345abd6b9a69
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This module simply sits on another virtual bdev
and adds a simulated average and p99 latency to that drive.
Change-Id: Ie9fc91e27585fd0636cb7dc845cb41744bf24625
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When a new python script wanted to use RPC client or calls
from RPC lib from ./spdk/scripts/* it had to be created
within that directory.
By expanding PYTHONPATH in autotest_common, now any python
scripts can use that library.
First example of this is located in:
./spdk/test/bdev/bdevio/tests.py
Change-Id: Idf3e5891c3815a84c70525ab9338100acbfa4a43
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455219
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
New RPC added specifically to the bdevio app.
It will launch all tests on all targets by default.
When optional parameter for bdev name provided is supplied
tests will be ran against just that bdev.
After finishing, the application will await another RPC.
stop_init_thread() and __run_ut_thread now pass json request.
Added separate test.py to not pollute rpc.py with custom RPC
just for the bdevio application.
Added '-w' argument to the bdevio app, so that instead
of performing the tests immidietly - it awaits RPC.
After a lot of changes to blockdev.sh, we might end up
removing this argument and just use it as default.
Change-Id: I82e52352bdf8082c1712caa223ad5ab78aa4e7fa
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455200
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All the SCSI commands have two states: allowed and conflict,
based on different reservation types and I_T nexus, the SCSI
module will check each commands before sending to the backend
device.
Change-Id: Ib05cece1c237873360f85c68d139362200d2d47e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NOTE: pulling the vbdevcompress change into its own patch...
While enabling reduce testing in autotest a few issues were found
in autotest in that some options were being set based on the existence
of a header without checking the test flag, if one existed. Then at
the end of adding options, specific test flags were checked for 0 and
the configure updated to --without. So, to make this easier to read,
the options are organized in sections and where there is a header
dependency as well as a test flag, both are chcekced at the same time.
Change-Id: I8cdc6914906500bbac63528eb541e2b235feb797
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455137
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add the unit test of the nvme ctrlr init delay to increase
the code coverage.
Change-Id: I0d31055fafc1ad13682496163e15de0a5f1e90e3
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
After iSCSI login sysfs is not updated immediately, but when session is
initialized. It can take a while and causes that sometimes scripts
cannot write to sysfs.
Change-Id: Ie4fa512704f022041bb3d9ab02dbb4210ddd04a0
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454890
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
rootdir is the pattern used in the other tests
Change-Id: Idaedf8a3d9aeed54a9113a38986f29fa04355d9a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454797
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The vhost tests create some temporary files as they run outside
of the SPDK repostiroy. Clean these up.
Change-Id: Ic964fc6672b8a4ea088ace1b11c712eb70f7be08
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454933
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Ubuntu18 integrates librxe to rdma-core, libibverbs-dev no longer ships infiniband/driver.h.
Don't compile librxe on ubuntu18, install package rdma-core instead. ubuntu16 keeps the old
method. Otherwise, there's no NIC can be found for SoftRoCE failed.
Change-Id: Ib639b96a4229c79f2b27fda7b981d7a805f808cb
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Before simplifying test suite execution it was needed
to loop around function actually running the tests.
So the test functions now can directly contain whatever
that was doing, without intermidiate function between.
Change-Id: Ic4b648d8d26d6be7a3bf1efb1b1ee3f2615ee5fa
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455672
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The QoS test no longer sets arbitrary QoS limits and
can no longer run into cases where disk is not able to
even reach that limit. We can reenable it for per-patch
testing now.
Change-Id: If05b1306c38889840c071a165b00c44295610950
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454670
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
check_qos_works_well() has been split into two separate
functions: run_fio() and verify_qos_limits().
Change-Id: I8c112ab93aed9f16d80c9a0a3f61280c44bf6539
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451888
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We used to set an arbitrary qos limit which in some
cases happened to be higher than the actual disk
capabilities. Even though we had an explicit check
for that and we skipped the entire qos test suite
if the device was too slow, the disk performance could
vary and be just enough to pass that initial check,
but then slow down and fail in the middle of the test
suite. If the bdev maxes out at 21MB/s on one run, it
may just as well do 19MB/s on another. That is exactly
the case causing intermittent failures on our CI.
We fix it by removing the arbitrary qos limit and
setting it to a % of the maximum disk performance
instead. This lets us e.g. remove the code for skipping
the entire test suite when the disk is too slow. We
definitely don't want to skip any tests.
Change-Id: I6de8a183c00bab64484b4ddb12df1dedfbed23f8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451887
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make the old name a deprecated alias.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibbf50676e0d989b67121e465fc140f94faec46ed
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453033
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These are used when running test scripts in iso mode at
your desk.
Change-Id: I1876771d8a94c9db57636c143f7bf9d6f98bd3aa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
With this patch each target has separate suite,
tests are ran just once for all setup suites.
Suite init/fini functions were added that move
current g_current_io_target ahead for next suite.
Results what works for particular bdev are of more use
rather than combination for all bdevs.
This will come useful when we want to perform RPC for only
select targets.
In case of CUnit library error, application is stopped without
returning number of failures. This is because at that point
its numbers are not reliable.
Change-Id: Ie82b6e33374841bf829da09a16a401fddd1fd81c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We flush a cache buffer once it's filled. When the write
for that cache buffer has completed, we look to see if
there's more data to flush. Currently if there's *any*
more data to flush, we will flush it, even if it's not
a full buffer.
That can hurt performance though. Ideally we only want
to flush a partial buffer if there's been an explicit
sync operation that requires that partial buffer to be
flushed. Otherwise we will end up writing the partial
buffer to disk, and then come back and write that data
again later when the buffer is full.
Add a new unit test to test for this condition. This
patch breaks one of the existing unit tests which was
designed specifically around a RocksDB failure condition.
Change that file_length unit test to now write exactly
one CACHE_BUFFER, which still tests the general logic
making sure that we don't confuse the amount of data
flushed with the value written to the file's length
xattr.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I83795fb45afe854b38648d0e0c1a7928219307a2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455698
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Data can get implicitly flushed as cache buffers are filled. But
the length xattr is only written in response to a sync or close
operation. So we cannot just look at the amount of data flushed,
and ignore the sync operation if all of the data written has been
flushed - we still need to write the length xattr.
This also adds a unit test which reproduces the original problem.
Fixes issue #297.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icca6ef4d1544f72e9bc31c4ee77d26b4b7f0cce4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We don't provide windows executable for this test.
Change-Id: Iedaafba06662f776c102528f8073b6c3d56bb323
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450406
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Recently, we moved the check for running an installed version of DPDK
above the point where we export the SPDK_* test flags. This resulted in
SPDK_RUN_INSTALLED_DPDK being undefined when trying to check fi we
should run against an installed DPDK. This just caused autotest_common
to print an error message every time it was loaded. I don't think that
it actually caused any errant behavior but this gets rid of the error
message. It's also probably a good idea to keep these definitions as
close to the top of the file as possible.
Change-Id: I5aadbe5c925ecf1ac92926b75c8c043aab73b36b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the latest TLC NAND, one write buffer unit (rwb batch)
needs to be spread over three PUs instead of being allocated
to a single PU for better sequential read performance
since the optimal write size(ws_opt) of 3D TLC NAND is
3 times bigger than the optimal read size(rs_opt).
I added num_interleave_units in 'struct spdk_ftl_conf'
to configure the number of interleaving units per ws_opt.
If num_interleave_units is set as 1, the whole of the ws_opt
blocks are placed sequentially around each PU.
If num_interleave_units is set as N, the 1/N of the ws_opt
blocks are staggered. So consecutively numbered blocks
are separated by ws_opt / num_interleave_units.
The sequential read performance is improved from 1.9GiB/s
up to 2.97GiB/S with this patch on our system. No performance
degradation is observed on sequential writes or
4KB random reads/writes.
Please refer to the Trello card for more details.
https://trello.com/c/Osol93ZU
Change-Id: I371e72067b278ef43c3ac87a3d9ce9010d3fcb15
Signed-off-by: Claire J. In <claire.in@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450976
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In some cases user may want to flag blob for removal
then do some operations (before removing it) and while
it happens there might be power failure. In such cases
we should remove this blob on next blobstore load.
Example of such usage is delete snapshot functionality
that will be introduced in upcoming patch.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I85f396b73762d2665ba8aec62528bb224acace74
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453835
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To establish a persistent reservation the application client shall first
register an I_T nexus with the device server. An application client registers
with a logical unit by issuing a PERSISTENT RESERVE OUT command with REGISTER
service action or REGISTER AND IGNORE EXISTING KEY service action.
Specify Initiator Ports (SPEC_I_PT) bit and All Target Ports (ALL_TG_PT) bit
are not supported for now, the registrants belong to the I_T nexus who sends
the command.
Also Activate Persist Through Power Loss (APTPL) bit will be supported in
following patches.
Change-Id: If057a764a4bfa73017f98048c94b697dbfa4b4a1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436088
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Good suggestion from Darek - let's just always
parse common script args from autotest_common.sh.
These arguments follow common arg naming conventions
(i.e. --iso) so there's no harm just doing this for
any test that sources autotest_common.sh. This has
the nice effect of not requiring scripts to
explicitly call this function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id89b68c22557a5a771be407873d0e57843f0d05a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455552
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Modify FIO test to use all cache modes that we support,
including WriteBack
New test config uses Nvme bdevs instead of mallocs because
memory is an issue when testing OCF
Change-Id: I3abec9605b61791f8ebaaaf08b88a011a50d3f26
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451022
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tests for checking read-only option no longer fail.
Removing rootdir variable and sourcing commands as
*_vm.sh scripts are designed to be run as standalone
inside spawned VMs.
Change-Id: I491ebf8e2b305539e3fabdc6219ea53693ad2883
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455203
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
iscsi test scripts can now take two arguments -
"iso" and then the sock type (posix or vpp). They
need to be in that specific order too. nvmf test
scripts also support "iso" and we want to add
the transport type (rdma or tcp) as well. Even further
out, we may want to use a sock type for nvmf, i.e.
tcp transport with vpp.
We also have the iscsi_tgt fio_remove_nvme.sh test
that does both iscsi and nvmf.
So to make this all work a bit nicer, add a new
function called parse_common_script_args that
will take the command line arguments to a script
and set the appropriate variables, including defaults
when a specific parameter isn't specified. We will
use getopt-like behavior for this also, instead of
enforcing a specific parameter order. Then a script
could be called like this:
test/nvmf/target/shutdown.sh --iso --transport=tcp --sock=vpp
Individual test scripts then just need to do this
after sourcing autotest_common.sh:
parse_common_script_args $@
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifb8d7666384991482a2d425e26ffa7525b9ac15a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455283
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Apart from writing the data to OCSSD, mirror the latest two bands of
data on the persistent write buffer cache. Currently the data is only
sent there, further patches will add metadata support, shutdown recovery
and L2P updates.
Change-Id: Ief05d0c23fa0e25bd6085e0ce3e1528d6736d174
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450266
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
