In case contigmem is loaded, but the kernel environment hasn't been
properly updated with hw.contigmem.* options, kenv will fail,
breaking the check to determine if contigmem should be unloaded.
Avoid the above scenario by determining first if given option is
actually set in kernel's environment.
Change-Id: I4118b7622fd876b28f0c07d081c583f5782f0357
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some 4.18.x kernels are shipped with a broken uio driver due to the
following change:
git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9421e45f5
Try to detect if we are running against a faulty uio driver and if so
fallback to igb_uio driver if present. The priority of picking up the
drivers has not changed.
Note that this commit may be deemed as not needed since from CI
perspective the https://review.spdk.io/gerrit/c/spdk/spdk/+/4342 may
be simply enough.
Change-Id: I9b12511c203c0be0e8f3f462c9c96babde52dc6e
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Recent refactors removed the behavior introduced with a6edaa9600.
Bring it back and don't try to rebind the VMD devices if they were
not explicitliy allowed in the setup.
Also, shuffle the code a bit and put verification pieces under one
block where $mode is being determined.
Change-Id: Ie2cc41e402f20147b98ab288d623ac76a4472839
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4398
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Error log as below:
06:27:53 # nvme_namespace_revert
06:27:53 # /home/storage/workspace/opal-end-to-end-reservation-autotest/spdk/scripts/setup.sh
/home/storage/workspace/opal-end-to-end-reservation-autotest/spdk/scripts/setup.sh: line 109: /sys/bus/pci/devices/0000:80:04.2/driver/remove_id: No such file or directory
home/storage/workspace/opal-end-to-end-reservation-autotest/spdk/scripts/setup.sh: line 110: /sys/bus/pci/devices/0000:80:04.2/driver/unbind: No such file or directory
06:27:54 # trap - ERR
Change-Id: I302e58143f0e165b17a9b5edd14121e6282f55a7
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Most distros ship these drivers as modules, however, some, like
clearlinux, have them compiled directly in the kernel (e.g. nvme).
In case modalias lookup fails, have a fallback prepared just in case.
Change-Id: Ib9da8ff69edbb0c4ce427aa089fa7d04b399a20b
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4047
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The previous approach didn't take into the account systems where root
partition is representend in a virtual form of /dev/root (see
clearlinux). In case the device was bound to virtio this would fool
setup.sh into thinking nothing is mounted and proceed with unbinding
the entire rootfs.
Fix this by checking the maj:min numbers of the device instead of its
name against the mountinfo list.
Change-Id: I0feb2584869f6bb72df3e9a4e619620240cfce3b
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4046
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make sure that setup.sh waits for block devices during the tests.
This is to make sure that the underlying controllers are ready to
be talked to and minimize the amount of their flakiness.
Change-Id: Id09445de7ac7ccf4c9f679ee2b6c4bdd14c89733
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4029
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifeadc3fac3f5d09143dd13ef3d510de9cecffb8a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4032
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are some devices for which nvme driver takes a long time to
finalize the unbind stage. With that in mind, each device would
add up a significant amount of time needed for setup.sh to complete.
To mitigate such a scenario, make sure the controllers are unbound
in a parallel fashion.
Examples taken from the system with 19 nvmes on board:
[root@supermicro4 spdk]# time ./scripts/setup.sh &>/dev/null
real 0m36.250s
user 0m1.024s
sys 0m1.990s
[root@supermicro4 spdk]# time ./scripts/setup.sh &>/dev/null
real 0m4.848s
user 0m0.867s
sys 0m17.605s
Also, take note that this is currently done only for the nvme
devices since other, i.e., ioatdma, seem to trigger a BUG in the
kernel when unbound in parallel. Some details here:
https://bugzilla.kernel.org/show_bug.cgi?id=209041
Change-Id: Icaeb2b2ecb306f149587bc5da73743b1519bc5d6
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3893
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is a first patch from a series attempting to merge similar
routines used throughout setup.sh.
Change-Id: I4c71b88f7556b0e9e2f65a37b8175914022486a4
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3889
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When using vfio a warning for memlock limit is printed.
TARGET_USER is one set by caller when executing the script,
or set to user that called the script (even when using sudo).
Yet ulimit was printed for the one executing the script,
most likely root.
This patch verifies ulimit for a particular TARGET_USER.
Along with more explicit information which user the
information pertains to.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I20ad62109bc316295208e21f959ecfc263307e1c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1964
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The -1 is valid value indicating that the node id for given device
has not been specified. Detect it and map it to "unknown".
Change-Id: Id97d9046be0e4d5ff257bca66ae3e73e906253fe
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2229
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use * instead of ? to match all the potential nodes not only those
with a single digit id. The actual node limit is dependent on
kernel's CONFIG_NODES_SHIFT hence in theory, the actual number of
numa nodes may be far greater than 10.
Change-Id: I1d587735b433ed23594725b9d77a44f7cc729494
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2228
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, store kernel name in the separate var and use it throughout the
entire script.
Change-Id: Iaa1c4c4aa52fb4aa708fb476478a81e9c6067b58
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2340
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Expose a cache of pci devices in form of an assoc array that could be
looked up during the runtime of a script like setup.sh.
In case of setup.sh, caching speeds up execution quite visibly:
config run, no caching:
real 0m4.488s
user 0m1.440s
sys 0m1.260s
config run, caching in use:
real 0m2.876s
user 0m0.365s
sys 0m0.420s
Note that for initial config runs, binding controllers to proper
drivers is the actual bottleneck.
status run, no caching:
real 0m1.877s
user 0m1.252s
sys 0m0.984s
status run, caching in use:
real 0m0.371s
user 0m0.242s
sys 0m0.204s
reset run, no caching:
real 0m2.559s
user 0m1.409s
sys 0m1.322s
reset run, caching in use:
real 0m0.960s
user 0m0.432s
sys 0m0.419s
Additionally, in case common tools, e.g. lspci, are missing, fallback to
sysfs to pick all needed devices from the pci bus. Targeted for Linux
systems only.
Change-Id: Ib69ef724b9f09eca0cbb9b88f1c363edc1efd5dc
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1845
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add bin/unbind support between the kernel idxd driver
and VFIO. UIO not tested but tested this extensively
on a system with valid idxd kernel driver and VFIO.
Future patches in this series add the actual idxd
low level library and bdev accel plug-in module. See
those patches for more details on idxd.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I09dd00b1aedcf88577335bde79d31cfd50ac4cde
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When overriding with igb_uio you used to have to manually probe uio
before calling setup.sh. I feel this is a common enough use case that we
should check it in setup.sh directly.
Change-Id: I8a31f90bab6960eade468816ffe960820f83d2fe
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/818
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Correct shellcheck rule SC2089: Quotes/backslashes will be treated literally. Use an array.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I40d4eef334cd030294669f8e8494f9e7a563d495
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It fixes change 474989.
"for blkname in $blknames; do"
was changed to
"for blkname in "${blknames[@]}"; do"
if blknames=" vda" then first blkname="" and
linux_bind_driver is called for vda although it has active mountpoint
Change-Id: I16d4379db274faa5703230072cfcf8d18a8ef5e6
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476061
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2128: Expanding an array without an index only gives the first element.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I0e7c335af678114dc78dfb12a02369a69158e435
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474989
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Correct shellcheck rule SC2166: Prefer [ p ] && [ q ]
as [ p -a q ] is not well defined.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I3fb2fb0e790bbdd296b64673c301324632d7c37b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472173
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2013: To read lines rather than
words, pipe/redirect to a 'while read' loop.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I01c0dcf045fc131ce0cfa672e5ede0b881a47406
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471433
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Correct shellcheck rule SC2145: Argument mixes string and
array. Use * or separate argument.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I45102ead2e97cc1d6b11c21f269e58a235055c35
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470926
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Variable was used as an array but is now assigned a string.
Change-Id: I79e59d80be96657a9c2fc66f9d205458f9db67b2
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
In the event that our fuzz test passes, we should manually remove the
trace files from the /dev/shm directory. This will prevent us from
failing to allocate /dev/shm files when a machine consistently passes
the tests and doesn't reboot.
Change-Id: I2ccde6aba7d61fda3a28ed24e009c6f8f81c20b4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK/DPDK startup time can be very important - especially
in secondary processes. If DPDK cannot figure out the
TSC via cpuid or rdmsr, it will instead use a 100ms sleep
to calculate the TSC. On Fedora kernels, the msr module
is linked into the kernel, enabling rdmsr and bypassing
this 100ms sleep. But on Ubuntu kernels, the user must
explicitly load the msr module, otherwise it will incur
the 100ms sleep.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I779f023bb1681570da81c99cefa66debf3e1adc6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465711
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Changing according to styling check done by ShellCheck.
Removing from check_format.sh exclusion list:
SC2236 - Use -n instead of ! -z
SC2070 - -n doesn't work with unquoted arguments. Quote or use [[ ]]
Change-Id: Ia9d645b9d0ce31b67c4de682395cf36f4ddc8d1f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463180
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
On multiple development systems (including mine), this results
in new error messages when running scripts/setup.sh. This has
the potential of causing lots of questions when users upgrade
to SPDK 19.07.
I understand the desire for the error messages, but I think we have
to come up with a smarter check than just against "unlimited".
This reverts commit 0abee610f0.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2854af556b67a9a4e5f686c72c4407962808f964
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463357
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently we do not switch driver for NVMe that is mounted.
The problem is that we take into consideration only the
first namespace, but any other namespace can be still mounted.
In such case we should not switch driver.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Idd13edccd0929574f2914a71e841e67871dd2e9f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457762
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Scripts were using a mix of two approaches, lets unify that so
just dollar-parenthesis syntax is used.
Also update two scripts from spdk/test which we previously missed.
Change-Id: I429f9bc158076462b419fae597f716c329f9b7aa
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To bind VMD device it need to be specified
in PCI_WHITELIST.
Change-Id: If19c47941278e4df9c6157024bba8b76c90695c6
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Orden Smith <orden.e.smith@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455635
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
On non NUMA architectures the numa_node sysfs entry doesn't exist.
Check if it exists before reading to prevent an error causing 'status'
to fail.
Reviewed-by: Qingmin Liu <qingmin.liu@broadcom.com>
Tested-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Reviewed-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Change-Id: Iacf5b062a4f5db5e049d2cfcff7c991d4ac5d3c3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448576
Reviewed-by: Scott Branden <sbranden@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Qingmin Liu <calmarrow@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This utility used to be called "bdevtest" so that's
what opts.name was set to for spdk_app_opts_init().
Change it to the new name "bdevio".
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8e6614c6fe82651952f46ec56de14ef0a8961f0
Reviewed-on: https://review.gerrithub.io/c/445800
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
