New vm_list_all function returns just vm numbers - with no
path. vm_shutdown_all was not modified to add back the path,
so it would immediately think all VMs were shutdown when actually
they were not.
While here, fix a few other typos and nops.
Fixes db0c3174 (test/vhost: avoid setting nullglob's where possible)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I43c58eac4dba3422cda34a2b8a02d174d4737f61
Reviewed-on: https://review.gerrithub.io/399951
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
After 1c164f117d ("vhost-blk: enable vhost block with new added
get/set config messages") vhost-blk "_size_X" workaround is not needed
nor used.
Change-Id: I6d8cb761aba65f6eb080d6d285ebf65de12dc212
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/399670
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If any command fail while nullglob is set error handlers find bizare
shell state and sometimes fail with odd errors. To avoid this introduce
function that will never leave nullglob set after return
Change-Id: Iff8ae410072c4e5f7f9e72e28171fc24e6186f5f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/397092
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This seems to be causing intermittent failures after updating qemu to
a newer version; disable this test until the root cause is found.
Change-Id: I0962e0db1bc244abec3d56483308c3f558d4d7f2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/399263
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Rather than using 'cd' and then ./-relative paths to launch the vhost
test scripts, just specify the full path relative to $WORKDIR. This
should allow print_backtrace to find the script sources for these tests
when failures occur.
Change-Id: I17ca1ebea393df4da427668645ba6f99356a57da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398972
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New vhost user messages GET_CONFIG/SET_CONFIG can be used for
vhost-blk for the purpose to get configuration parameter such
as: Capacity and block size. This commit enable this feature,
users don't need to append capacity any more when started
QEMU. Also event notifier is added for the purpose to change
capacity of block device while QEMU is running.
Also re-enable the vhost-blk tests.
Change-Id: I06ef697984eeea3abbbd655bdcaccaa3b7aa72d7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/386546
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Install the new custom qemu branch in a different location
(/usr/local/qemu/spdk-2.12-pre) so it can coexist with the current qemu
branch.
Change-Id: I6986dcaef804dcefc4e77c83c019ba0f3be8dbd6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398983
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Add vhost-scsi and vhost-blk multi-os test case
which used Ubuntu and Centos VM in nightly
Fix vhost nightly readonly case for vm shutdown timeout
The 10s isn't long enough for the VM to shutdown
so the script trap error in line "((timeo-=1))"
in common.sh script and exit
Change-Id: I5a44a2b1bf6b3247383603d5896b8bdde16a9a45
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/393602
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: qun wan <uniqueanna@hotmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
vm_setup was creating setup with only one disk type defined.
With this patch it can set disk type per disk by adding disk type
after disk name separated by coma
e.g.
vm_setup --disks="Nvme0n1,spdk_vhost_scsi"
Change-Id: Ib89f440210468f4c9082aadcf07ce461e34c4ff8
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/395980
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
if vhost retuns error on exit using spdk_vhost_kill, the tests
would continue instead failing
Change-Id: I923d579f9e8614c39b27186418439d185770b3a7
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/398622
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tree-wide cleanup of all instances of printf()-style functions where a
format string contains a space before a newline character.
Change-Id: Ib5b5861e97bed9e9d62db03875547e3f771f4769
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397031
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Track individual parts of the setup_vm phase in the vhost initiator test
that builds SPDK inside the VM.
Change-Id: I25c924808db0f934dd53043b06668da96099cf62
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/397285
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I004e6ebae38ec923817410f7ad530dd707a307b1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/393773
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Blobstore default cluster size is currently 4MiB,
but default lvol cluster size overrides it to 1GiB.
Additionally add -c flag in lvol tests to set cluster
size for tests.
1GiB was fine without thin provisioning, but we do not
want to allocate and copy 1GiB of data for newly allocated
clusters on thin provisioned logical volumes.
Note that 4MiB is same as default for Linux LVM.
lvol test case 601 had to be modified to create a malloc
LUN less than size of default cluster size. This test is
supposed to fail - without the change here, creating the
lvolstore would work, but the script still considered it a
PASS. Defer fixing that to a separate patch - for now just
keep the same test process.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic05defbf8e641f613f0ec74175a37bc25986e496
Reviewed-on: https://review.gerrithub.io/397562
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds support for live migration for vhost-scsi and vhost-blk
backends.
Change-Id: Ibfc8a713dbba14ba8cb38377a71e28fd340b1487
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/394203
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The test system may not have qemu-img installed system-wide, since we
build a custom version of qemu and install it in a non-standard path.
Change-Id: I52e16fc7bbf90b9c3d0832f6a81c5cfecd5f24ed
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/396675
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Chen Wang <chenx.wang@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Code refactoring to accommodate for coming hot-remove tests.
Change-Id: I41cfb04b467bf21a5a991712791ee6bfc87c241c
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/391957
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New tests are performed on guest vm where vhost scsi
controllers are presented as a virtual pci device.
Some changes in common.sh had to be made to allow to build
spdk on vm and to set queue number.
Change-Id: I8289d6aede6020e958c9e5aae893591d844cdbcf
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/394248
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I25f62d221c251a2ce455bfca7f686bb5817aa7d6
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/394199
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add vhost-scsi and vhost-blk fio test cases which used more cores
and controllers in nightly
Change-Id: I51b47f6272c1b29dff890384087014627238dc68
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/389072
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also move the test plan file to a more appropiate location.
Change-Id: I462058279d4d2dc03790657b82b3cfeb00c8a93a
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/394180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
-perform rw tests on all devices
-perform unmap tests + rw tests to match number of jobs and queues
Change-Id: Ica59ea3667c1c3a639ec9cded0fd43ea9d83ef03
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/394074
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
With multiqueue all jobs run in parallel so
test execution time will not be extended
Change-Id: I6187ee0acf6958b137ba74dd34706538197ce966
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/394389
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add vhost-scsi and vhost-blk filesystem test cases with
lvol and nvme back-end in nightly test
Change-Id: Id2cccd9a45aaa995bef90415855835b93447f2e9
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/390923
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is to help facilitate the update of the fio_ubuntu binary to fio-3.3
Change-Id: I4c896dc60255f821a5cf66af818396f210304f07
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/395394
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix the nightly vhost readonly test case issue
in physical machine.
Change-Id: Ie0799f06268bcef4a230b162bc70266ce4aae8cd
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/395014
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was causing failures in the test pool.
Test run shows there are still issues with this script
that need to be debugged.
Fixes e6e2fc5b07 (test/vhost: don't call vm_setup.sh helper script to setup VM)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic8f63ceffe77e6ec9fc10ecb0c852b6070f96935
Reviewed-on: https://review.gerrithub.io/394592
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We define 'size' and 'offset' parameter as % of device so on nvme
devices the tests are run with big files and small on malloc so we
can remove the 4G test case
Change-Id: I4840e859732696dd981ab0ab11e5270c025ff248
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/391838
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
test virtio devices created from scsi controller with multiple targets
Change-Id: Ibef135c4dc6fdb324bec6b42c9e532add92e656a
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/391836
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
key file
When using '-x' option some loops produce huge amount of useless debug
logs. It would be good to have different log levels but for now let
silence those places.
Use 'readlink -e' while checking default ssh keyfile path. This ensure
to fail if keyfile is invalid link.
Change-Id: I1e24fe02a3e1a1646b710e5e3d8c2ee2c1abf2a4
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/393799
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Forwarding http/https might increase boot time in some distros (like
Ubuntu). Test don't use it so might be removed.
Change-Id: Ia9f07bbae03c37888bcf06fec480577ae79e78cd
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/393176
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
vm_setup.sh is a proxy script for vm_setup function which should
be called directly.
Change-Id: If9cd70a9bf67a743144142ea75887dfbd539b38a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/393160
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
vm_run.sh is a proxy script for vm_run function which should
be called directly.
Change-Id: Ia7ac242fe8c24b9ce76e6d5483bd52f84225b0bb
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/393159
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
run_vhost.sh is a proxy script for spdk_vhost_run function which should
be called directly.
Change-Id: I6ca3e049e812bf05c9251e16c75f6ff90c3b0f0a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/393145
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
helpers
So we can better trace what failed.
notice - just echo to stdout
warning - just echo to stderr
error - echo to stderr and return false, so trap ERR can catch this
fail - like err but call 'exit 1' at the end so if no trap ERR is used
it will exit anyway.
Change-Id: I5c7b3682fd6c0d81c07c58a5ec965155c7593407
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/392218
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Copy fio config to guest VM with the same name instead of
renaming to /root/fio.job.
Use the same file name for creating log file in desired directory.
Remove not needed ls command in common/run_fio while at it.
Change-Id: I9e13d8cd6f7892a77d89afb99f7d57ef79f7b11f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/393469
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There's a bug lurking somewhere in vhost
shutdown path causing intermittent
failures. Sending a SIGABRT instead of SIGKILL
will make the process dump core. We could use
it to speed up debugging.
Change-Id: I0825deecbf26e32ff073fdbcdfe42640c52453b9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393477
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new file, scripts/common.sh, that can be shared between not only
autotest scripts, but also scripts/setup.sh, scripts/gen_nvme.sh, etc.,
and move the PCI iteration functions there.
The iterators are also expanded to work identically for both dev_id and
class_code on Linux and FreeBSD.
Change-Id: I98423cd06242e78535f5da4fce82166812ea96a8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393416
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Current relative work dir path caused problems with downstream
test scripts when running spdk_vhost.sh using relative path
Change-Id: Ifd47bd37650a6328cb0f548a03cb4de010093320
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392744
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tests need adjustments due to patch:
https://review.gerrithub.io/#/c/392587/
Change-Id: I098aca99fe22a9e01246da74b4b9fbf25f4b5b99
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392745
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ibd3e485085793260ca4bb2bfa3da6025b2c997aa
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/392450
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This was removed some time ago.
Change-Id: I5e4b588fb881793d750999ff73e8bf891cb58fc0
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/391952
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
