This patch refactors driver init and in doing so eliminates the mem
leak described in the GitHub issue. Also it is now consistent with
how the pending compression driver does init.
Fixes#633
Change-Id: Ia2d55d9e98fb9470ff8f9b34aeb4ee9f3d0478f5
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442896 (master)
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447607
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When hotplug feature is enabled by NVMe driver, users may
call delete_nvme_controller() RPC to delete one controller,
however, the hotplug monitor will probe this controller
automaticlly and attach it back to NVMe driver. We added
a skip list, for those user deleted controllers so that
NVMe driver will not attach it again.
Fix issue #602.
Change-Id: Ibbe21ff8a021f968305271acdae86207e6228e20
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444323 (master)
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447595
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make modyfication of global allocator index tread safe
by using atomic operation
This patch also changes mempool size to be 2^n - 1
which makes it more efficient
Change-Id: I5b7426f2feef31471d3a4e6c6d2c7f7474200d68
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442695 (master)
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447588
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are some cases that virtual bdev open and close
the device and QoS will be disabled at the last close.
In this case, when a new bdev open operation comes again,
the QoS needs to be enabled again.
Change-Id: I792e610f4592bad1cac55c6c55261d4946c6b3e2
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442953 (master)
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447455
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unmap, discard, write zeros will be sent down from
higher stack. Remove these IOs for the QoS limit.
Change-Id: Ieb3cc19f31c43f8ddf8f8d2fd338f442ef48b679
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442673
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This RPC doesn't really work in some cases - for example,
trying to delete one NVMe namespace bdev from a controller
with multiple namespaces, or just one virtio SCSI device
from a virtio-scsi controller. We've previously kept it
and marked it as "debugging only" - but every bdev module
has its own RPC method now for deleting what it constructed,
so keeping the generic delete_bdev RPC is asking for
trouble in some of the cases mentioned above. We'll remove
it in the 19.04 release.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I639254b32a3e1c840a4e9ae2658c42f4f321b676
Reviewed-on: https://review.gerrithub.io/c/442616
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The io_device associated with the aio bdev was only
getting unregistered when the aio bdev was explicitly
deleted - not in the implicit deletion path at shutdown.
Move the io_device_unregister into the destruct_cb -
this makes sure the io_device is always unregistered, whether
the bdev is getting unregistered via an explicit RPC or
implicitly in the shutdown path.
Fixes#618.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I44b77f5c38339f4cf97b02c0ee4002bf5fcc9998
Reviewed-on: https://review.gerrithub.io/c/442119
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Error check of strtol is left to users of it. But some use cases
of strtol in SPDK do not have enough error check yet.
For example, strtol returns 0 if there were no digits at all.
It should be avoided for each use case to add enough error checking
for strtol.
Hence spdk_strtol and spdk_strtoll do additional error checking
according to the description of manual of strtol.
Besides, there is no use case of negative number now, and to keep
simplicity, spdk_trtol and spdk_strtoll allows only strings that
is positive number or zero.
As a result of this policy, callers of them only have to check if
the return value is not negative.
Subsequent patches will replace atoi to spdk_strtol because atoi
does not have error check.
Change-Id: If3d549970595e53b1141674e47710fe4dd062bc5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/441626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This was marked deprecated in 18.10
Change-Id: Id47e770b0388c935fe684aeef7a9824f24cef47f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442416
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add rte_pause to waiting while loop
This commit also adds spdk_pause as interface for rte_pause
Change-Id: I56e1023731e2e78febaa4f45808d6f07656d290f
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/436494
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Use mempool for allocating OCF requests with constant size
Previous method was using mallocs which is significantly slower
Change-Id: I539ff22efc18fbd353ceb2687ea211d2baaa7523
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439680
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Add new RPC method for OCF bdev: get_ocf_bdevs
It is useful in respect to not registered OCF bdevs
which do not appear in standard get_bdevs call
Change-Id: I8a5fc86a880b04c47d5f139aa5fa4d07ca39c853
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add basic handling of base devices hotremove
When either core or caching device gets unregistered,
the vbdev_ocf does so as well
Change-Id: I05769f714bf22cb320558fed86adc8c3d8a0a185
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/435729
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Add OCF module based on OCF meta-library
Open CAS Framwework (OCF) is high performance block storage
caching meta-library
It is open-source, published at https://github.com/Open-CAS/ocf
With this patch OCF-enabled device is represented in SPDK
as virtual bdev having core and caching devices as its base devices
This patch includes implementation of:
* OCF top adapter (vbdev_ocf.c)
* OCF bottom adapter (dobj.c, data.c)
* Adaptation layer for OCF (env/)
* OCF context abstractions (ctx.c)
Adaptation layer and context abstractions are not dependent on SPDK bdev
OCF bdev supports reads and writes, configured at startup
Other features will be added with separate patches
Change-Id: Ic2dcab378c8238d16f1e4b64d4374bdf257565bc
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/435708
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
_spdk_bdev_io_submit uses the bdev_io->internal.in_submit_request
flag to ensure we unwind in cases where the I/O is completed
inline (i.e. malloc or null bdevs). But when an I/O gets queued
for QoS, and then we iterate through the queued I/O in
_spdk_bdev_qos_io_submit(), this flag was not getting set
when those I/O would get submitted to the underlying bdev. This
would allow for _spdk_bdev_qos_io_submit recursion, resulting
in all kinds of different types of memory corruption.
Fixes#613.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I29263f4e7b2ead60f08b60474d210defa803348c
Reviewed-on: https://review.gerrithub.io/c/442127
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
In patch fbec702944 (bdev/crypto: Set QAT alignment
requirement) we added an alignment requirement for I/O
buffers, but the internally-allocated buffers for
encryption haven't respected it.
We now allocate those buffers with the crypto bdev's
required alignment. It is only required for QAT and we
do it unconditionally, but we don't want to strcmp the
driver name in the hot I/O path just for that - the
code is to be refactored anyway.
Change-Id: I2cbc04408ddc5574f212b63536a05eb73ceba104
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441908
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds FTL bdev. RPC scripts have been updated to allow for
creation and removal of FTL bdevs.
Change-Id: I82a5c5033b65bbeb67c238cae969a68cff767dcc
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431329
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds RPC calls for histograms in bdev layer.
Following calls are added:
- enable_bdev_histogram - enable/disable histogram structures for specified bdev and each of its channels.
- get_bdev_histogram - merges histograms from all channnels and encodes histogram as base64
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ib423a919dc1cde7dd7d92247db5482cfb9d66956
Reviewed-on: https://review.gerrithub.io/c/433573
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some users require to do write zeroes operation when
erasing data on lvol. Currently the default method is
unmap. This patch adds flag to spdk_rpc_construct_lvol_bdev
call that changes default erase method. This is also a base
implementation for possible future function for erasing
data on lvol bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8964f170b13c2268fe3c18104f7956c32be96040
Reviewed-on: https://review.gerrithub.io/c/441527
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch adds the RPC support for the Read/Write separate
bandwidth limit controls. The basic usage as following:
usage:
rpc.py set_bdev_qos_limit [-h] [--rw_ios_per_sec RW_IOS_PER_SEC]
[--rw_mbytes_per_sec RW_MBYTES_PER_SEC]
[--r_mbytes_per_sec R_MBYTES_PER_SEC]
[--w_mbytes_per_sec W_MBYTES_PER_SEC]
name
positional arguments:
name Blockdev name to set QoS. Example: Malloc0
optional arguments:
-h, --help show this help message and exit
--rw_ios_per_sec RW_IOS_PER_SEC
R/W IOs per second limit (>=10000, example: 20000).
0 means unlimited.
--rw_mbytes_per_sec RW_MBYTES_PER_SEC
R/W megabytes per second limit (>=10, example: 100).
0 means unlimited.
--r_mbytes_per_sec R_MBYTES_PER_SEC
Read megabytes per second limit (>=10, example: 100).
0 means unlimited.
--w_mbytes_per_sec W_MBYTES_PER_SEC
Write megabytes per second limit (>=10, example: 100).
0 means unlimited.
Change-Id: I822ec4814d21adff9826ce03a6af3783b1b98f44
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/417650
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds the support of read and write separate
bandwidth rate limits control with the configuration file.
Below is the example (in MiB) for the configuration section:
[QoS]
Limit_Read_BPS Malloc0 100
Limit_Write_BPS Nvme0n1 200
Change-Id: I0221516ce70c3fbb07b9e80c1c814ed5ba271c88
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/416672
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We know how big this should be so no need to dynamically allocate it.
Change-Id: I00ae6cb7c7f525d946d213e0f58cc5fe05bcf932
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441128
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Everything need to be removed to get the remove callback called.
Otherwise we will end up with dangling devices and user callbacks
possibly not called.
Fixes#567
Change-Id: I37259f6cd97268060170a6b17a0c0df4d543a224
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440890
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added set_read_only_lvol_bdev() RPC that marks
lvol bdev as read only.
This enables to create clones off of a base lvol,
without having to create additional lvol bdev with snapshot.
Change-Id: Ic20bbcd8fbebcef157acce44bfa1da035b0da459
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For QAT, a single operation can be described at most by one IOV.
To assure that we don't get memory buffers that are sub-block sized,
set the alignment requirement to the block size of the underlying device.
Change-Id: I4071bb89e696fc40e010798bd76520e5fb765217
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440988
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch added two new function pointers (queue_io,
update_io) for related qos operations like iops and
bandwidth rate limits.
Change-Id: I2ffd67c5f1c421eab448fd5e95f809da55805fcd
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Check my_lba in gpt's primary header equals to LBA1.
Set correct my_lba in unit test to pass the test, and update
related header_crc32.
Change-Id: I124a7a883e9304bd3955ce3de6b589596c4195ea
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/439889
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are some patches to linux kernel for separating
out discard IOs that are written to /proc/diskstats and
the various /sys/block/*/stat files. The following additional
fields were added to these files:
Filed 12 -- # of discards completed
Filed 13 -- # of discards merged
Filed 14 -- # of sectors discarded
Filed 15 -- # of millisecond spent discarding
SPDK could provide these raw information to bdev_io_stat. Users
can use these information to calculate more states of block device.
Signed-off-by: Yanbo Zhou <yanbo.zhou@intel.com>
Change-Id: I517d67f0ff0159baf04e24732a8fd0ccefcb9c46
Reviewed-on: https://review.gerrithub.io/c/439057
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
It is probably best to clear the pointers to global memory when those
pointers are no longer valid. It also helps make the unittest a little
bit clearer.
Change-Id: I73f9568f40ba8bff63f4e3346c83a48766f26129
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437991
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This follows the same trend as the mem_map APIs.
Currently, most of the spdk_vtophys() callers manually
detect physically noncontiguous buffers to split them
into multiple physically contiguous chunks. This patch
is a first step towards encapsulating most of that logic
in a single place - in spdk_vtophys() itself.
This patch doesn't change any functionality on its own,
it only extends the API.
Change-Id: I16faa9dea270c370f2a814cd399f59055b5ccc3d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The underlying io_channel created by a bdev module
could be never freed in various cases due to missing
spdk_put_io_channel() calls.
Change-Id: If1aa736f67f0354c4f9dcdf61d3f1e6b859b4c48
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438803
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since bdev->internal.mutex protects variables in bdev->internal,
there's no need to init the fields of spdk_bdev_desc struct and
free the struct when claim_module exists within the mutex lock.
Reducing critical area could help to reduce lock competition
caused by opening bdev concurrently.
Change-Id: Ie6b2a63e44a97cfed914fa6d8adef2c5ec3ac300
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/438514
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When create channel, the fields that _spdk_bdev_channel_destroy_resource()
checked are always be set to non-null. Remove these unnecessary if
statements makes issue exposed more easily if something goes wrong.
Change-Id: I2d505c87176d4d49eb1528a258e4bea6477e0fe6
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/438799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
