Previously, the shared buffer pools were allocated on the
nvmf controllers. When a new connection was established,
the CONNECT command needs a 4k buffer, but we didn't know
which nvmf controller it belonged to until after the
CONNECT command completed. So there was a special case
for CONNECT that used in capsule data buffers instead.
Now, the buffer pool is global and always available. We
can just use that always, with no more special cases.
This has the additional nice side effect of allowing
users to run the target with no in capsule data buffers
allocated at all.
Change-Id: I974289f646947651c58d65cf898571d80e9dee9b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374360
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
When users don't enable hotplug option in their configuration
section, SPDK will enable it by default. DPDK will print probing
messages continuously for NVMe devices which don't belong to SPDK.
Change-Id: I8c43335a282ecba206b4b5305bd881d2bd07836e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/374486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a file-backed AIO bdev to test it out.
Change-Id: Ifdf206bbdf6cae9379fdc02c80755e96a7198bce
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373673
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id7e0f4b3f14e7cc18cd05df639a13843f2e85763
Reviewed-on: https://review.gerrithub.io/372346
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is now only virtual mode. Virtual mode has been
improved enough to reach feature parity with direct
mode and performance benchmarks show no degradation.
Simplify the code by always using virtual mode.
Change-Id: Id5cdb5d4d8c54e661b245ed7250c2f9d66ca2152
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/369496
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
-Add a configuration option: Read-only flag
Vhost block controller can be set in read-only mode.
Option can be enabled in config file or in RPC call:
'construct_vhost_block_controllerr' with '-r' option
Change-Id: I7e58243be00d33bc04120d573fd4ed7775bb9b2c
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/366086
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Always use "Local7" internally. We want the log API
to be generic instead of syslog specific.
Change-Id: I021f719e90c236f123fa1cadebc0c199b87ba077
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365295
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Temporarily disable stub usage in the RocksDB test until we diagnose the
cause of the intermittent test failures (no hugepages available).
This reverts commit 6bd7c5b42c.
Change-Id: Ie0eca36c3a15708d2483bae32ce2e217036d2b1d
Reviewed-on: https://review.gerrithub.io/367263
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iba5bb17a30b7d7ec39fe64df93860dd8500f2ad1
Reviewed-on: https://review.gerrithub.io/362607
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove the "Nvme" from several field names. The parser
will still accept the old name for backward compatibility.
Change-Id: I6fa86ec359b23fb63960d0aa479a845b36a0977a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The user can now not only specify an optional timeout for
commands, but also the action to take when a timeout is
detected.
Change-Id: I7d7cdd846d580e0b3a5f733d398ee9b19d6fe034
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is the initial commit for "blobfs", a lightweight
filesystem built on top of the SPDK blobstore.
Also included in this patch:
1) a shim for using SPDK bdevs as the backing store for
SPDK blobstore/blobfs
2) documentation for using blobfs as the storage engine
with RocksDB
3) scripts for running a set of workloads and collecting
profiling data with RocksDB and blobfs
See doc/blobfs/getting_started.md included in this commit
for more details on blobfs, including some of the current
limitations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2a6d3d4b87236730051228ed62c0c04e04c42c73
The user now must choose the name for each AIO bdev. This
provides consistency for names across restarts.
Change-Id: I13ced1d02bb28c51d314512d60f739499b0c7d8d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Names for the NVMe bdevs are now assigned by the user.
This means the same name will always be assigned to the
same device, even across restarts.
Change-Id: If9825ec9abcb5236b4671bc44a825e4f0d704fe3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
All devices must be specified by BDF. Add support for scripts
to use lspci to grab the available NVMe device BDFs for the
current machine.
Change-Id: I4a53b335e3d516629f050ae1b2ab7aff8dd7f568
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change SCSI device configuration format from "DevX LUN0" to "Dev X LUN0"
This allow checking configuration against silly errors when device
number is out of range.
Also assert exactly only one LUN is given.
Change-Id: Idccd6878119282fc51947b092bdda7ae06aa94ad
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This patch adds a library, application and test scripts for extending
SPDK to present virtio-scsi controllers to QEMU-based VMs and
process I/O submitted to devices attached to those controllers.
This functionality is dependent on QEMU patches to enable
vhost-scsi in userspace - those patches are currently working their
way through the QEMU mailing list, but temporary patches to enable
this functionality in QEMU will be made available shortly through the
SPDK github repository.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Krzysztof Jakimiak <krzysztof.jakimiak@intel.com>
Signed-off-by: Michal Kosciowski <michal.kosciowski@intel.com>
Signed-off-by: Karol Latecki <karolx.latecki@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Krzysztof Jakimiak <krzysztof.jakimiak@intel.com>
Change-Id: I138e4021f0ac4b1cd9a6e4041783cdf06e6f0efb
By default, all SPDK applications will not share memory.
To share memory, start the applications with the same
shared memory id.
Change-Id: Ib6180369ef0ed12d05983a21d7943e467402b21a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This virtual block device takes an underlying block device and splits it
into several smaller equal-sized block devices.
Change-Id: I6f6e686c1177b2e4885f7e88809ad329caae55bd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These were only intended for testing and should be replaced by a virtual
blockdev that can be layered on top of any kind of bdev.
Change-Id: I3ba2cc94630a6c6748d96e3401fee05aaabe20e0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is necessary to process asynchronous events, as well as keep-alive
support for NVMe over Fabrics connections.
Based on a patch by Edward Yang <eyang@us.fujitsu.com>
Change-Id: I3e81f3d5061f75b12b625fa1a06629c6dc3dc61b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This also changes the default listen address from 0.0.0.0 (accept any
connection) to 127.0.0.1 (accept only connections from the local host).
Change-Id: I3de09c582c95126d240795550a56be7aedea639c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If AcceptorPollRate is configured in configuration
file, the default value used will be given by
ACCEPT_TIMEOUT_US. So change the default value, it
can solve the performance degradation issue of
nvmf target.
Change-Id: I867bb03dd8b2b81b86911130babd0334d9857de8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
nvmf_tgt supports the same RPC option as iscsi_tgt, so copy its [Rpc]
description into the example nvmf.conf.
Change-Id: Ic5e99c70d6fb0713607673d3e78b1c01989e139a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Enforce exactly one trailing \n, and fix all of the existing cases.
Change-Id: I6218e4700e90aeb647eaee78089530c79993c8c8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch also drops support for automatically unbinding
devices from the kernel - run scripts/setup.sh first.
Our generic pci interface is now hidden behind include/spdk/pci.h
and implemented in lib/util/pci.c. We no longer wrap the calls
in nvme_impl.h or ioat_impl.h. The implementation now only uses
DPDK and the libpciaccess dependency has been removed. If using
a version of DPDK earlier than 16.07, enumerating devices
by class code isn't available and only Intel SSDs will be
discovered. DPDK 16.07 adds enumeration by class code and all
NVMe devices will be correctly discovered.
Change-Id: I0e8bac36b5ca57df604a2b310c47342c67dc9f3c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Users can specify the core for each subsystem and the acceptor listen routine
to run on different cores for performance consideration.
Change-Id: I4bd1a96f39194c870863b4b778e6ea7cf8fc1a2d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Similar to our NVMf target, this is an iSCSI target that
can interoperate with the Linux and Windows standard iSCSI
initiators.
Change-Id: I6961c5ef99f7b161c396330ed5b543ea29b0ca7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These don't actually work quite yet, but pipe the
configuration file data through to where it will
be needed.
Change-Id: I95512d718d45b936fa85c03c0b80689ce3c866bc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a much simpler approach and is only slightly
less efficient.
Change-Id: I909de376d576a74156c1be447e90e7dbc240f025
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These can be simplified and merged into the subsystem.
Remove the concept of mappings from subsystems and replace
it with a list of hosts and ports. The host is optional -
not specifying a host means any host can connect.
Change-Id: Ib3786acb40a34b7e10935af55f4b6756d40cc906
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change the Port configuration file entries to a new format:
[Port1]
Listen <transport> <address>:<service>
Initially, this still only supports RDMA, but the new format will allow
specifying other transports once they are added.
Change-Id: Iadfd19b91db57b571064379368dbe77204ccecbb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is just extra complication for no real benefit.
Change-Id: I528af98e799d0641e753390fe35ff561fa3d7d76
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Multiple NVMe controllers within a subsystem does not work correctly,
since we would need to virtualize the controller data, namespace IDs,
and so on. For now, only allow pass-through mapping of a single NVMe
controller per subsystem.
Change-Id: Ib2d3576d2856c46a086f38eb6bec56f3e7a73575
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The maximum in-capsule data size is determined by the I/O queue bounce
buffer size, and there is no point in limiting it beyond that, so remove
the need to configure it.
Change-Id: I64806516b847e819f57ac9f62a162f7a04805b57
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
4420 is the officially assigned IP port from IANA for NVMe over Fabrics.
Change-Id: I433a5ed0780d1ffd7ca6512617759d59fa5e8def
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
NVMe over Fabrics defines its own NVMe Qualified Name (NQN) format; it
does not use iSCSI Qualified Names.
Also change the default node base for nvmf_tgt to "nqn.2016-06.io.spdk".
Change-Id: I2b73c1426ef1d8c83cc2df499d79228ea61257cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This enables SPDK_NVMF_BUILD_ETC to be moved out of the library as well,
since only authfile was using it before
Change-Id: I10d1145881f9a0358d7effe2d2d9851899413e1b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The section is really defining a subsystem as defined
by the NVMf specification. There does not appear to be
any need for a group of subsystems.
This change only updates the configuration file. It does
not remove all references to a subsystem group from
the code.
Change-Id: I38e62735a5ac924dcafacb3c9a332a103d751d4a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The specification refers to this concept as a Host,
so use that term. This only changes the configuration
file usage. Initiator groups are still referenced in
the code and will be removed later.
Change-Id: I897f4dbdfb65d94da1e5a77434fc07a2c18bcdc2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
