This allows NVMe PCIe devices to be used with
physically discontiguous I/O payload buffers.
So far this is just a dumb splitting which
doesn't check for physical contiguity. This is
improved in a subsequent patch.
Change-Id: I0ecc443149225eaa0e4156ddda78613bcf034406
Suggested-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417060
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is an spdk_memzone_reserve variant with additional
alignment parameter. Now that memzones must be used for
physically contiguous memory, it will become extremely useful.
Change-Id: Ie48d682217e0e2f5c859a1603bb8a81fd2a7d7df
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/416978
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Future DPDK versions may drop physical memory contiguity
guarantee for common memzones. DPDK 18.05 introduces
an RTE_MEMZONE_IOVA_CONTIG (0x00100000) flag, which is
documented as follows:
> RTE_MEMZONE_IOVA_CONTIG - Ensure reserved memzone is IOVA-contiguous.
> This option should be used when allocating
> memory intended for hardware rings etc.
To preserve backward compatibility, SPDK introduces an opposite
flag, SPDK_MEMZONE_NO_IOVA_CONTIG.
Change-Id: I9ea79b096fdb094051f13c9a802740b0e4ccc98e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/416977
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This const makes the array passed in immutable, but that
isn't helpful or interesting since it just contains
invalid pointer addresses. It may also make sense in the
future to NULL out the addresses in the array in a debug
build. So drop the const.
Change-Id: I921551c7cb1dbf6c765fb301c31906b8b93b7f16
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/417362
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This was obviously omitted in the original implementation.
Change-Id: Ifba049cdb8d1c1f24e30adb542946a2fa83c7464
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/416655
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Within the bdev layer, we want to know specifically what I/O
types the module supports. However, the bdev module may elect
to emulate some commands and report additional support via
the public API.
The bdev layer already emulates WRITE_ZEROES, so correctly
report that fact.
Change-Id: I79bfb1aee1b3e6048f951bb1b2c7d4f7c9ef184d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/416464
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Save the original size of the disk to metadata when it is first created.
On load verify that the disk did not change size.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I535940ee188425ee3b394effd99653cc073d541e
Reviewed-on: https://review.gerrithub.io/410896
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Newer versions of scan-build complain about cb_fn potentially being null
in spdk_bdev_unregister.
Change-Id: Ib5607234557f2104ee30398a620fa595389a33e9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/417064
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
When spdk_for_each_channel() was called on an io_device with no
channels, the completion function would be called immediately in the
context of the spdk_for_each_channel() caller. This is different than
the normal completion when channels are present, which is always called
asynchronously via spdk_thread_send_msg(), causing problems for callers
that did not expect to get the completion callback before
for_each_channel returned.
In particular, this causes problems with the set_bdev_qos_limit_iops RPC
method, which holds a mutex around the spdk_for_each_channel() call and
also attempts to lock that mutex again within the completion callback.
(This is GitHub issue #344.)
To avoid this problem and make the completion call consistent between
no-channels and channels-present cases, always send the completion via
spdk_thread_send_msg().
Change-Id: I9e5ec3592462c7b2ed682e665fe62ae3a5b5cc59
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/417068
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Same as we do with SPDK_ENV_SOCKET_ID_ANY, memzone
flags should be translated from SPDK defines to their
DPDK equivalents instead of passing those 1:1.
Note that we don't use any memzone flags so far.
Change-Id: I4100dd7ac8825eecd7f323bc21b3b6b8347bfa8d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/416976
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a generic NVMe-oF command that may be used for other transports.
Change-Id: Id5fbf1f176ef5f75a221b40eff538e693817bcaf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416578
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
All controllers have a controller ID (cntlid), and this will be needed
in other NVMe-oF transports, so move it to the generic controller
structure.
Change-Id: Iaba5b93e1267e7bef3a6eb7c677c549a3d83985c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416577
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This can be used for other NVMe-oF transports.
Change-Id: Ic8d2dc483220eb3690cb756bcd750d19c93d98e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416576
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These functions are generic and may be used for other NVMe-oF
transports.
Change-Id: Idb3aa30d9b0b1be7b60b85ab4911b28db35977a4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416575
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
instead of hitting S11 on event
Change-Id: I7af2a1961bf2c05005a23c3f50eadbcd23e7e38f
Signed-off-by: Leonid Ravich <Leonid.Ravich@dell.com>
Reviewed-on: https://review.gerrithub.io/416972
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_thread is recommended to be used in SPDK library.
Change-Id: I5b75f390ddb2069e1266a3fc4f28732b281df725
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/416482
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
IO channel is freed unexpectedly at LUN removal. This hides
error due to uncorrect implementation of LUN hot removal.
IO channel of LUN must be freed only by its allocator.
Change-Id: Id3721180422364dfc4d9309f3a22ce0a3f766f82
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/416318
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
if the scsi status of the task is not GOOD, iscsi_transfer_in() returns
immediately. Hence checking it again is not necesasry.
Change-Id: I55cb025e97c8dcd51692303d0d21ce48b1185631
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/416315
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also report that the NVMe-oF target does not support Flush with the
broadcast NSID.
Change-Id: Iad761a6f81eb099940463a67074a6dccb8871b70
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416445
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
I missed this one in the initial series.
Change-Id: Id4dc7574a04cd964455852f1a00084b65ab989b3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/416253
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fix issue #313.
For multi-process test scenarios, the secondary process may access
controller’s CSTS register in the shared ctrlr list. For this situation,
all the controllers are already in the primary shared ctrlr list, but
then each controller is added one by one in the secondary process, so the
secondary process may access CSTS before it is remapped for the BAR space.
In the rpc_config.sh test case, the spdk_nvme_ctrlr_get_regs_csts function
will be called in _nvme_pcie_hotplug_monitor function before calling
spdk_pci_nvme_device_attach. This step caused the secondary process iSCSI
Target access CSTS before it is remapped for the BAR space.
Change-Id: Ifd62c38adf8624f9877a9a2f965ca4db28839d99
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/412594
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds support for following Open-Channel vector commands:
* Vector Chunk Reset
* Vector Chunk Write
* Vector Chunk Read
* Vector Chunk Copy
Implementation is consistent with Open-Channel specification (rev. 2.0)
This patch provides unit tests for new public NVMe
Open-Channel namespace commands.
Change-Id: Ic71be9357c61c5de82ca672e82a71aa933bd1875
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Reviewed-on: https://review.gerrithub.io/414969
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Construct calls that create single new bdev,
now return a string instead of array with single element.
Change-Id: Iad841b8e5eab0265693efb6be472354ea616c562
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/416081
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add FC definitions to nvme header and library functions.
Change-Id: I8980f55d834c1e1d4f415756cb7a46a3ff1c7db3
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Reviewed-on: https://review.gerrithub.io/416434
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Users can set specified Admin commands or IO commands with
error status, when submitting new commands which are already
set with error status, the commands will return to the caller
with specified error code. So that users can emulate some error
status for their error condition code path.
Change-Id: I4b93c7e4f2b15a659da73b39e26bfa162eb5214e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/410870
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This adds tsc statistics (busy, idle or unknown) to the reactor.
It will help measure actual time we are busy vs. idle during
an event run or whenever a poller kicks in.
Change-Id: Ife556a27a30dab842488bacb5fbee0d4297745c3
Signed-off-by: Vishal Verma <vishal4.verma@intel.com>
Reviewed-on: https://review.gerrithub.io/412695
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for iSCSI bdev.
No changes in spdkcli, since it is not implemented yet.
Tests unchanged, because test is only done by running
bdevperf and exiting. Without time to delete_iscsi_bdev.
Change-Id: I8341bfb65932a1deb1fb6463e11ef932d6f6d597
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/415678
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for error injection bdev.
Changes in tests and spdkcli done accordingly.
Change-Id: I7f0be09cfed582c4d1060871e40c41eff5af7129
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/415502
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This separates the network interface management code (interface.c and
net_rpc.c) from the socket abstraction layer, which allows users that
only want the socket abstraction to avoid pulling in the JSON RPC
libraries.
Change-Id: I9b00285a70bac0c74c73353cfa900d4f3b2e465f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416475
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some of the uses of SPDK_NVMF_FABRIC_SC_* were neglecting to set SCT to
indicate that these status codes are from the command-specific set.
Change-Id: Ief2a77e06d69e5925f8d8b1ec89ff2612250dcf0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416430
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for malloc.
Changes in tests and spdkcli done accordingly.
Change-Id: I5296452f552ee6eaba4d012d47aea022f17b9d6e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/415259
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch adds an API to decouple blobs parent removing dependency
on it. Blob stays thin after this operation.
Also unit tests for blobstore inflate are improved and reused with
decouple parent functionality.
Change-Id: I96dfee467c78cf4f4d929ec7bc05263f7a23a8aa
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/410829
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When snapshot is created from a clone, clones parent is not
inherited.
This patch also updates unit tests covering this case.
Change-Id: I42eb00fe2f33504c5b5c5beded20c4ea65eaff67
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/414804
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
ASAN has some memory address regions that it will not
allow applications to use for mappings (including mmap).
So when specifying --base-virtaddr to DPDK for
shared/mutli-process mappings, pick an address that
ASAN will allow the application to map.
Ref: https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm
We will still disable ASLR while using the test stub for now.
Maybe we can eliminate this too in the future, but for now just
modify the autotest_common.sh comment since we've figured out
how to keep ASAN from messing with the mmap hint.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie24fd35bd22aa3ceab6271e8936775b157e5c330
Reviewed-on: https://review.gerrithub.io/416420
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
4KiB page size * UINT32_MAX = 16TiB - so we must use
a uint64_t for any blobstores on backing devices of
16TiB or greater.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ief13cf06d413477dc8ab4f9fe0ff4c0631566c00
Reviewed-on: https://review.gerrithub.io/416448
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure we don't truncate the LBA when using it to serialize the
cluster array into an extent list.
We also need to add an explicit cast in _spdk_bs_cluster_to_lba
to ensure the conversion doesn't get truncated. While here, do
the same cast for _spdk_bs_cluster_to_page.
Change-Id: If4e65ed86550e39dfa39826930dfafac158d519c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.gerrithub.io/416231
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7c3969c479c4fa1017423515b27d8db187142420
Fixes: 6b504fda5df6 ("nvme/rdma: add timeout support to RDMA transport")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416245
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is duplicated in three places; combine them into a shared helper
function.
Change-Id: I47682da8fa8b13134a6422c6a0e8a4d68f12ee36
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416257
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I4830bcd2342551a6a02afd6e4551acbf463eb44c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416256
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Previously, the blobstore load code was iterating over the masks (blob
IDs, clusters) byte by byte, then bit by bit in a nested loop, but it
was rounding incorrectly and skipping any bits set in the last byte if
the total size was not a multiple of 8.
Replace the nested loops with a single loop iterating over bits to
simplify the code and avoid the bug.
Change-Id: Ib365421bf3ba1002d2e5634b34c2bcf9ef7d1267
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416230
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I3ec1603d1d73f67773fcb7f43d63b1db55d4d6af
Reviewed-on: https://review.gerrithub.io/416055
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
