Users may want to connect specified controller at running time,
so this API will connect to the controller and return probe context
to users, users must call spdk_nvme_probe_poll_async() to initialize
the controller to the READY state before using it.
Change-Id: I232886b000454ee826ea73c4e1043d0d18ee0ec6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445657
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI target will need to get data block size except for metadata.
Other SPDK application may need to get the same information
future. Hence this patch adds an new API spdk_bdev_get_data_block_size
to bdev layer. In the header file, spdk_bdev_get_data_block_size
is located next to spdk_bdev_is_md_interleaved to avoid confusion
by new users.
Change-Id: I0fd2a6d0bcf6a4c18c583f70d96cc5035fc57fe9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445082
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New API added for upper level to get controllers'
supported flags.
Change-Id: I51e9d0e57c355fa37f092602a94f4c08deb8898c
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446091
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We never used this anywhere, and I need to move to a model where
the start up action is a thread message instead
Change-Id: I6b21ba9afb93a3245aceca2fe24713ffd16d0933
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446986
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function add possibility to check if there are any scheduled operations
on particular thread.
Return from spdk_thread_poll() will be used as a way to load-balance and
signify if any work was performed during the single iteration.
A poller could return 0, but still be registered.
This helps especially in fio_plugin that only checked active_pollers or
messages via spdk_thread_poll().
Change-Id: Id6237278eb3b4bd4922b2abaa3c8ebd5e434d45d
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445915
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This function add possibility to check if there are registered pollers
on particular thread.
Change-Id: I80af06a10c5c1b54fed5bb28a3aa769a52d8a206
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446624
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Default 'unmap' option stays as it was.
'Write_zeroes' comes useful when one wants to make sure
that data presented from lvol bdevs on initial creation presents 0's.
'None' will be used for performance tests,
when whole device is preconditioned before creating lvol store.
Instead of performing preconditioning on each lvol bdev after its creation.
Change-Id: Ic5a5985e42a84f038a882bbe6f881624ae96242c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users should not access the internal probe context fields when
using the asynchronous probe API, so change spdk_nvme_probe_async()
to let it can only return the probe context pointer.
Change-Id: I0413c2d8db6cbe4539ad80919ed34dd621a9df70
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445870
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
User can create a probe context to probe and attach controllers
asynchronously, the controllers will be added to the context list
for the first step, then users can poll the context until the list
becomes empty.
Change-Id: I3a96e2d8a9724332ff15542f78f9553fdab505e2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442664
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
strip_size as an rpc param is now deprecated and can be removed
in a future release. Either strip_size or strip_size_kb can be
used but only one of them or the rpc will fail.
Internally we maintain both fields because strip size always
comes in as KB but we convert it to blocks so having both elements
makes it clear for developers what they're looking at.
JSON output includes both strip_size and strip_size_kb.
Fixes#550
Change-Id: I5dc51e8af22eae3d56af8f8d37a564dbaae228fa
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In SPDK, we will build isa-l with no shared option
and then integrate it into SPDK. And we do not need
to install isal in the system libaries.
Note: ocf build in autobuild.sh now needs to build
include/spdk/config.h before building the ocf library,
to ensure that header is available in a clean build
environment.
Change-Id: I3f0ce6932b386de17a77cf5bfdfd738b22417e2d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Chunyang Hui <chunyang.hui@intel.com>
Added FTL module user guide including setting up QEMU for Open Channel
drive emulation.
Change-Id: Ic9b46552ba99a2180a9f72e8c08e876edcecd39d
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441736
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added set_read_only_lvol_bdev() RPC that marks
lvol bdev as read only.
This enables to create clones off of a base lvol,
without having to create additional lvol bdev with snapshot.
Change-Id: Ic20bbcd8fbebcef157acce44bfa1da035b0da459
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Need to check user input and return status of parsing
to prevent app or target from crashing.
Input checking function will be added in the future.
Change-Id: I8167ac13306ae4f81e2cacb80edd9dcf9382c374
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Based on requirement of initializing SPDK env
from a DPDK application, relative to spdk_env_init,
add spdk_env_dpdk_post_init for calling after rte_env_init.
More details, visit
https://github.com/spdk/spdk/issues/529
Change-Id: I6fda1593e0296ef93b705e31cc76bcd0d248673a
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, we allocate the buffer size according
to the MaxQueueDepth info, however this is not exactly
a good way for customers to configure, we should provided
a shared buffer number configuration for the transport.
Change-Id: Ic6ff83076a65e77ec7376688ffb3737fd899057c
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/437450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to specify the host-side configuration for each
controller to which we connect.
Change-Id: Iac2aed3934d4a326f45546f2f541e374308e2589
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/436219
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add init_crc parameter as seed value to spdk_crc16_t10dif API to generate
a CRC value spanning multiple separate buffers.
This will be necessary for upcoming DIF/DIX patches.
Having init_crc parameter is general, and so change the existing API
without adding seed version of the existing API.
Change-Id: I0ac7919b18013967e41829dcedd3e4e73204d5d6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/437204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Now trace facility can be enabled/disabled at runtime,
besides app starting parameters
Change-Id: I086564665ba4375b946a5339d5921d6584e9bfda
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/435470
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The nvme/identify cmd issued some cmds to a ctrlr irrespective
of its type, and when the target was a Discovery ctrlr which only
accepts a very limited cmd set, that would result in errors observable
both on the initiator side (from nvme/identify) and in the output on
the target (nvmf_tgt). Introduce new API, spdk_nvme_ctrlr_is_discovery(),
and alter identify to make use of that in determining which commands
to send to the target.
Change-Id: I974a569843f1d2b9e1ece7bd3bf9ceee1bfae872
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/436225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ia65e235a85207c128ba274e1bab38d6c35344239
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/435563
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I03042c4a7030eaac406e3c3afe6fe2f69bd9db36
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/436301
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: Jim Harris <james.r.harris@intel.com>
We will keep the RPCs for now but mark them deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0407dcb392ea0c9e89c0f26cd5670aed2dbfadef
Reviewed-on: https://review.gerrithub.io/435345
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are some use cases such as multipath and RAID expansion where a
vbdev could have been registered before one of its base bdevs.
Currently we unregister bdevs at shutdown in reverse order of their
registration. Continue to do that in general, but skip any bdev that
is still claimed. Any bdevs skipped in this way will eventually be
unregistered once any bdevs that have claimed it have completed
unregistration.
Change-Id: Iafde9558430bc5ce56e8608ef50bcb2b5fbfbf71
Signed-off-by: Andrey Kuzmin <akuzmin@jetstreamsoft.com>
Reviewed-on: https://review.gerrithub.io/432136
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
It is the first patch to follow the NVMe over fabrics
spec and implmenent the NVMe/TCP transport. It can be
divided into work in the host and target sides:
Host side: Add the TCP/IP transport in nvme lib (lib/nvme).
Target side: Add the TCP/IP transport in nvmf lib (lib/nvmf).
Change-Id: Idc4f93750df676354f6c2ea8ecdb234e3638fd44
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/425191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently there are no timeout mechanism for Admin commands
when initialization, the NVMe driver may enter infinite loop.
While here, add a new parameter to the controller initialization
options, NVMe controller will report an error when timeout
happens during initialization.
Change-Id: Id0c6b6fa15abe5227b486bee95c8e02914b0d358
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This option is deprecated. Also, rename the rpc and configuration
options for setting the opts to reflect that they now only set the max
number of subsystems
Change-Id: Iaabcbf33dd0a0dc489d81233fda74e9e7f3e0d2e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430161
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9c01bfc05417f07b9265692a02b6aaba37c507f2
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/431529
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
