This was never rebased after the shellcheck changes
went in. Fix it so that master can pass check_format.sh
again.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic124c8e77049f08ab29a5b4a902e7718d378dd22
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466951
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch introduces new hotplug test which uses
PCIe interposer capable of physically connecting and
disconnecting NVMe drive from the system. It uses
custom build HW based on mircrocontroller to which
we connect and through which we send command to NVMe
interposer to connect or disconnect NVMe drive from
test machine. Scenario of this test is similar to the
scenario we are using for software hotplug test with VM.
Parameters for the test are IP address of the microcontroller
and GPIO pin to which the interposer is connected.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3610dadfd23521da2c90fd83e6895d942b3f66df
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462470
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
perf is under the examples directory, but it's much more than
an example application and probably needs to be moved. We use
the libaio functionality extensively as part of benchmarking
and comparing the SPDK driver with the kernel driver. So we
need to keep this functionality.
This reverts commit b3d9ebae21.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifb9a1df919d32a98c328101029cc22e91915a976
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466795
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function is useful for each test which use nvme device, so
it will be easier to keep it in autotest_common.sh file instead of
including also nvme.sh in each test.
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Change-Id: Ic2e186826211725b95f3ec3b455d23f43ea41b8f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464691
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users can use '-N' option to disable shutdown notification
for faster shutdown process.
Change-Id: I227dc4da3aa2f89d23f9b235e979cb6d3e25d635
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463950
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Changing according to styling check done by ShellCheck.
Removing from check_format.sh exclusion list:
SC2236 - Use -n instead of ! -z
SC2070 - -n doesn't work with unquoted arguments. Quote or use [[ ]]
Change-Id: Ia9d645b9d0ce31b67c4de682395cf36f4ddc8d1f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463180
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For kernel-* mode do not use mounted nvme disks for tests.
This was not checked previously and could result in losing
all data on NVMes not meant to be used in test.
Change-Id: I336c95b8e79e2592897c6b354e5a20a9c86f1482
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Original intention most likely was to compare nvme lib to
aio, but since then aio bdev was developed.
There should be no need to keep the support for AIO in
perf example app.
Change-Id: I716f2164b8eaef16db05b4fffa35393c7d916e0b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461593
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Adding capability to use bdevperf to this script. We
need to use bdevperf to demonstrate performance of up
to 10 million IOPS per core. fio overhead limits that
number to less than 3 million IOPS/core.
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Change-Id: Iad81fc73a961b05e168befbed01bf800b9888564
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459695
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I1c99d4504d30fade5eed4d781c14ccd427b0f6a5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459560
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I4959aedbf0ae641cc8f4ade2da8929157b5e501d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459559
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We should brake through both loops of tests, but
currently we break only through one. Also change the
way the blk name is assigned to not overwrite it.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9a4ce004e1115301080c86ceb9a429cd6fc831e3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461250
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch removes restriction for using only first
namespace when testing nvme cli and includes other
namespaces than first one in nvme fio tests.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I047f85520b441313cf1788c06d8f4c7d7ef4e162
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some tests return error if no namespace is found,
but such scenario should be accepted.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Icc799eac1ebc2d4f16017722da3c20d58788fb33
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459276
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I2c2f0a9b85a9d4393296ec125537c7a244e08a55
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I3949913f1a69d5c0b0798077cf794b1dbd5bf0cc
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459557
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I749a557ab95162aa9bb91bf0ec9b53146c50fb0f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459556
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I3c3c65829ea9479ec6574716f41ed61fb0a8d81c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I41f8d8ba2cde155074bfc4e0b6c43aa956c6cb40
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459554
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As have updated the NVMe reset case, the check_io() must be executed
after ctrlr reset. It's easier to reproduce #819, so we can set a
short time.
Change-Id: I9ba867a6c2aa1a3921bace2e77acd28a069d9016
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Updated doc to include section on how to compile SPDK with link
time optimization (lto) gcc flag prior to running the benchmark.
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Change-Id: I1af4033144dd9f7594bcf40621acb7fb52018e7a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459330
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Scanbuild error on fedora30 reports:
warning: Array access (via field 'write_buf') results in a null pointer dereference
if (context->write_buf[i]) {
In deallocated_value.c, cleanup function be used at many places to deal with failed
cases even context->write_buf is NULL, so add context->write_buf pointer check before
array data. I think context->read_buf is the same.
This is related to issue #822.
Change-Id: I33c685fd732da820c1dfc861eb991b92b41caa29
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make it easier to reproduce issue #819 without setting long time.
To decrease the UT time.
Change-Id: I3dd0268a894113e1a12395618721afee6137588d
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457914
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It's always set in autotest_common.sh, there's no need
to set it again in each test script.
Change-Id: Ib14c4189c553dad54a3065c1a1d413a5fc5a5347
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
ASAN needs to be LD_PRELOADed before SPDK fio_plugin
in order to analyze its code.
Just adding that will report any issues in fio binary as
well as the fio_plugin.
To prevent known fio leaks from affecting the results,
a suppression list for LeakSanitizer (used in conjunction with ASAN).
At this time the suppression list contains known leaks
for fio 3.3. The list might need adjustments as fio
version is updated.
Side note. Even though it is possible to specify directory
to ignore ("leak:/usr/src/fio/"). Which in theory should
suppress any leaks in fio. It has side effect of hiding
SPDK leaks as well, since the fio_plugins leaks are
seen as coming from /usr/src/fio/ioengines.c.
See below for examples of each suppressed error:
Direct leak of 42 byte(s) in 4 object(s) allocated from:
#0 0x7f9d52f3e320 in strdup (/lib64/libasan.so.5+0x3b320)
#1 0x41f267 in get_new_job /usr/src/fio/init.c:490
Direct leak of 914936 byte(s) in 10397 object(s) allocated from:
#0 0x7f74422e8ea6 in __interceptor_calloc (/lib64/libasan.so.5+0x10dea6)
#1 0x46402e in log_io_piece /usr/src/fio/iolog.c:214
Direct leak of 608 byte(s) in 19 object(s) allocated from:
#0 0x7f74422e8ca8 in __interceptor_malloc (/lib64/libasan.so.5+0x10dca8)
#1 0x44c4e1 in add_to_dump_list /usr/src/fio/parse.c:1039
#2 0x44c4e1 in parse_option /usr/src/fio/parse.c:1098
Direct leak of 173 byte(s) in 20 object(s) allocated from:
#0 0x7f744227153d in strdup (/lib64/libasan.so.5+0x9653d)
#1 0x44b50d in __handle_option /usr/src/fio/parse.c:718
Indirect leak of 111925528 byte(s) in 1271881 object(s) allocated from:
#0 0x7f74422e8ea6 in __interceptor_calloc (/lib64/libasan.so.5+0x10dea6)
#1 0x46402e in log_io_piece /usr/src/fio/iolog.c:214
Indirect leak of 171 byte(s) in 19 object(s) allocated from:
#0 0x7f744227153d in strdup (/lib64/libasan.so.5+0x9653d)
#1 0x44c4ed in add_to_dump_list /usr/src/fio/parse.c:1040
#2 0x44c4ed in parse_option /usr/src/fio/parse.c:1098
Indirect leak of 167 byte(s) in 19 object(s) allocated from:
#0 0x7f744227153d in strdup (/lib64/libasan.so.5+0x9653d)
#1 0x44c502 in add_to_dump_list /usr/src/fio/parse.c:1042
#2 0x44c502 in parse_option /usr/src/fio/parse.c:1098
Change-Id: I9b5811993508421be50b12af160645c77ea93d7e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456315
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Scripts were using a mix of two approaches, lets unify that so
just dollar-parenthesis syntax is used.
Change-Id: Id093b6c82d1f766ba6af13bed720977eceaa7ffc
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457744
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
stay the print parameter same with it in the deallocate_complete().
Change-Id: I21734f2b3097fd3a1006e390ab87b0578f0cbc2a
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458029
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds functions in autotest_common.sh,
fio_bdev() and fio_nvme() for their respective plugins.
It simplifies its usage throughout the scripts.
Additionally will help with expanding the fio cmd
line with nessecary changes only in single place.
This will be used in next patch in series to
LD_PRELOAD ASAN before fio_plugin.
Note: Did not implement changes for perf scripts,
since they are usualy run separately and didn't want
to affect those.
Similarly didn't change vhost initiator tests,
because the exported directories do not work for
inside the VM. Will need to think of a way to change it
there as well.
Change-Id: Idf750ee7aa9d5e30efc0ce430d15fa45ceccb203
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456314
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
mk/nvme.libtest.mk includes mk/spdk.common.mk, but all
of the Makefiles including mk/nvme.libtest.mk were
also including mk/spdk.common.mk unnecessarily. So
remove the spdk.common.mk include from all of the
offending Makefiles.
This was relatively harmless, although it would cause
weird things like CFLAGS and LDFLAGS getting duplicated
when building.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie60637db3c19a2ead097562b2adf6573dbe27472
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455321
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This test runs pretty quickly, so let's just enable
it per-patch.
While here, remove the commented aer test. We are
covering aer in other parts of SPDK autotest.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If0fb9814ed51c52dda58297c49266a7ad283dd85
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453908
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are some QEMU bugs with resets for NVMe emulation.
It simply hasn't been tested for this test's very
stressful reset scenarios.
Since this test is failing the nightly builds fairly
regularly on VMs, just have this test print an
error message and exit 0 when it finds a QEMU SSD.
This will also allow us to enable this test per-patch
in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1013f1d84ab4d0e13f713fe99352b011d77dd1f8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454517
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This test intentionally generates lots of failed
requests - so disable logging for this test
application.
This should significantly reduce the number of
Jenkins java.io exceptions due to excessive logging
from this test.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I406e307575eeb82c103b7013b4feebfb2cf81864
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454082
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Check whether ASAN is enabled up front, before entering the loop over all PCI devices.
Change-Id: Iede6a0466014745b77190b79fb8255e7b61bb260
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453512
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This ensures the stub gets killed so that we can
make forward progress on collecting a backtrace.
This requires adding an optional parameter to the
kill_stub function to specify a signal.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib46d07b6651c6f35382f38c97901def03f28289d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tests can specify this new -t flag to tell aer to
touch the specified file after its ready to receive
an AER.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08cb584d487769d49a9345587c53529d7c02c528
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452804
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Nvme latency tests
IOPS vs. Latency at different queue depths
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Change-Id: I1192a18fa05f36c74385d286e86db571d52b9224
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/424063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvme-cli in NVMf tests currently fails to initialize
the NVMe driver and exits straight away [1]. It expects
the primary process to initialize the driver first, but
since the primary process doesn't operate on any NVMe
devices, it doesn't initialize the driver at all.
Fix this by running nvme-cli without multi-process mode.
In NVMf tests, nvme-cli is only used to discover, connect
and disconnect from an SPDK NVMf target. It does not need
to access any shared memory resources.
This wasn't an issue before, because we used an outdated
DPDK version for nvme-cli which didn't detect any other
shared memory processes of SPDK.
[1] nvme.c: 337:nvme_driver_init: *ERROR*: primary process
is not started yet
Change-Id: Id56f94c6655049e87ab9d93ee38853faf40a11e5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442552
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Makes the code slightly more readable.
Change-Id: Iebf8fb07bceacf433d4bdad0a30419a3faab7eee
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439370
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will enable us to fail all outstanding I/O when disconnecting an
NVMe-oF qpair.
Change-Id: I84190a19da23ef2d88d9fc26e25b33bd0f364b0c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/432211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Add init_crc parameter as seed value to spdk_crc16_t10dif API to generate
a CRC value spanning multiple separate buffers.
This will be necessary for upcoming DIF/DIX patches.
Having init_crc parameter is general, and so change the existing API
without adding seed version of the existing API.
Change-Id: I0ac7919b18013967e41829dcedd3e4e73204d5d6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/437204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch removes the "sshpass -p intel" from the test logs. This
trips up security analysis tools which flag it (falsely) as a leaked
password.
Change-Id: Id8e470561429821e320cdf185c43204938110c75
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/436891
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Much of this was originally applied by Darek in
6f5840d22 but then had to be reverted due to NVMe-oF
MR issues in a817ccf5. Now that the NVMe-oF MR issues
have been resolved, we can reapply these changes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: I58d603523901c78dbc81279078a09b2a24c091e6
Reviewed-on: https://review.gerrithub.io/436547
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Apparently there's a data race with the setup.sh script,
that may unbind the PCI device before the mount is visible.
Change-Id: I71a349a10a74e29405e3537c513f284acfbd39fb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/435259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I90e7d698cae7577736319e38f089e3b759c9beef
Reviewed-on: https://review.gerrithub.io/435343
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
