Now we need to add configurations in these files to run cases.
Add some settings in conf files for user to choose freely.
Raid bdev can be comprised of AIO/Nvme/Malloc.
Change-Id: Ifdab8539c89d2cf4fcd88ca7f26e8563e12dd585
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449772
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For NVMe devices, in conjunction with the new batching options,
it can be advantageous to artificially delay between polling
for completions. Add an option to slow this rate down.
Change-Id: I0fc92709ff45ead0beb388dda60694bf1ed8b258
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is not used anywhere, and is not something we can
set over RPC. So make this a command-line only option
(as it should be).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2df862cdce2f17992d2324312d5c0e98b38a8acd
Reviewed-on: https://review.gerrithub.io/423930
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Update spdk target config files and codes to only enable
16 trace group at most.
Change-Id: I1bd26ccea05d73cea54cbbcf2fcefa869d621352
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/422478
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch changes the default setting of IOAT copy engine from
Enabled to Disabled. Accordingly this patch changes the config file
specification for IOAT copy engine from "Disable Yes/No" to
"Enable No/Yes".
Subsequent patches will add a new JSON RPC to configure IOAT
copy engine dynamically.
Change-Id: I754990cbb6ecc096953dd2fb9d34366b91111bf8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/410757
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4d0bf222600437221b017533604876b8d6c717e1
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/409797
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Similar with exist vhost scsi/blk target, this commit introduces
a new target: vhost nvme I/O slave target, QEMU will present an
emulated NVMe controller to VM, the SPDK I/O slave target will
process the I/Os sent from Guest VM.
Users can follow the example configuation file to evaluate this
feature, refer to etc/spdk/vhost.conf.in [VhostNvme].
Change-Id: Ia2a8a3f719573f3268177234812bd28ed0082d5c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/384213
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The long-term plan is to use the JSON-based configuration format, but
for now, we need a config file section to be able to test a bdev module
in blockdev.sh.
Change-Id: I2a69f7172693ed6d4939a3b938747e2a1c62ff83
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405908
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
RPC is a default feature required for almost all usages,
so enable RPC by default, but with a UNIX domain socket
for security reasons.
-r can now be used from the command line to specify
an alternative RPC listen address from the default
/var/tmp/spdk.sock.
Remove the Enable parameter from the Rpc config section
but still allow specifying an alternative listen address
using the Listen parameter as an alternative to the
command line option. This keeps backward compatibility
for this release for anyone using the configuration file
still.
Remove the Rpc sections from all configuration files
that were using them, except for those that specified
alternate TCP ports for multi-process test cases. We
can fix these later to use an alternate UNIX domain
socket and to use the command line instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife0d03fcab638c67b659f1eb85348ddc2b55c4c4
Reviewed-on: https://review.gerrithub.io/386561
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When users don't enable hotplug option in their configuration
section, SPDK will enable it by default. DPDK will print probing
messages continuously for NVMe devices which don't belong to SPDK.
Change-Id: I8c43335a282ecba206b4b5305bd881d2bd07836e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/374486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id7e0f4b3f14e7cc18cd05df639a13843f2e85763
Reviewed-on: https://review.gerrithub.io/372346
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
-Add a configuration option: Read-only flag
Vhost block controller can be set in read-only mode.
Option can be enabled in config file or in RPC call:
'construct_vhost_block_controllerr' with '-r' option
Change-Id: I7e58243be00d33bc04120d573fd4ed7775bb9b2c
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/366086
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Always use "Local7" internally. We want the log API
to be generic instead of syslog specific.
Change-Id: I021f719e90c236f123fa1cadebc0c199b87ba077
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365295
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove the "Nvme" from several field names. The parser
will still accept the old name for backward compatibility.
Change-Id: I6fa86ec359b23fb63960d0aa479a845b36a0977a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The user can now not only specify an optional timeout for
commands, but also the action to take when a timeout is
detected.
Change-Id: I7d7cdd846d580e0b3a5f733d398ee9b19d6fe034
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Names for the NVMe bdevs are now assigned by the user.
This means the same name will always be assigned to the
same device, even across restarts.
Change-Id: If9825ec9abcb5236b4671bc44a825e4f0d704fe3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
All devices must be specified by BDF. Add support for scripts
to use lspci to grab the available NVMe device BDFs for the
current machine.
Change-Id: I4a53b335e3d516629f050ae1b2ab7aff8dd7f568
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change SCSI device configuration format from "DevX LUN0" to "Dev X LUN0"
This allow checking configuration against silly errors when device
number is out of range.
Also assert exactly only one LUN is given.
Change-Id: Idccd6878119282fc51947b092bdda7ae06aa94ad
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This patch adds a library, application and test scripts for extending
SPDK to present virtio-scsi controllers to QEMU-based VMs and
process I/O submitted to devices attached to those controllers.
This functionality is dependent on QEMU patches to enable
vhost-scsi in userspace - those patches are currently working their
way through the QEMU mailing list, but temporary patches to enable
this functionality in QEMU will be made available shortly through the
SPDK github repository.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Krzysztof Jakimiak <krzysztof.jakimiak@intel.com>
Signed-off-by: Michal Kosciowski <michal.kosciowski@intel.com>
Signed-off-by: Karol Latecki <karolx.latecki@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Krzysztof Jakimiak <krzysztof.jakimiak@intel.com>
Change-Id: I138e4021f0ac4b1cd9a6e4041783cdf06e6f0efb
