Change-Id: I1c5adcce861b8a1fc8f8c96a3a237c4c2dae61af
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/401559
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Three new RPC methods are added to allow modification of the NVMe-oF
subsystem allowed host whitelist at runtime:
- nvmf_subsystem_add_host
- nvmf_subsystem_remove_host
- nvmf_subsystem_allow_any_host
Change-Id: I5c98658f949dad013165c04497cca49867022ba0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/396063
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add optional parameters to namespace creation to let the user pick the
namespace globally unique identifier and EUI-64.
Change-Id: Ia3eebaf22f8a64733a00a83f90cafb4977c2d07a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399531
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Make the docs depend on all of the public header files and Markdown
files.
Without this, the docs never get rebuilt without a manual 'make clean'.
While we're here, add '@:' to the 'all' rule to silence it.
Change-Id: I304a1bb30464d2a0a60a1c117b7be1f7e543e15c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/399954
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In README.md remove references to prerequisites and instead refer the
reader to the relevant documentaion.
Change-Id: I136bdbe5cf88092ec0b30496c3b6ed3b8c1332c7
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-on: https://review.gerrithub.io/399786
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is quite important as QEMU vhost-user will report cryptic error
message that there is no shared memory to use.
Change-Id: Iad63962d4a3deed557db0b3420960aef557a3f86
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/399451
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
New vhost user messages GET_CONFIG/SET_CONFIG can be used for
vhost-blk for the purpose to get configuration parameter such
as: Capacity and block size. This commit enable this feature,
users don't need to append capacity any more when started
QEMU. Also event notifier is added for the purpose to change
capacity of block device while QEMU is running.
Also re-enable the vhost-blk tests.
Change-Id: I06ef697984eeea3abbbd655bdcaccaa3b7aa72d7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/386546
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The "core" parameter is no longer accepted for construct_nvmf_subsystem,
and it is also no longer returned as part of the get_nvmf_subsystems
result. Update the documentation to match.
Fixes: 7b397f6281de ("nvmf: No longer tie subsystems to CPU cores")
Change-Id: Ibec85de6942f8da99f195b747423040c54a44959
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398873
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I351c7bda1b32dc161c49d47fb2887595099e4be6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/396696
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This fixes the new nvmf_subsystem_add_listener RPC method to use "nqn"
as the parameter name to be consistent with the other NVMe-oF target RPC
methods.
Since this method is brand new, no provision for compatibility with the
old name is provided.
Fixes: 6336217e1653 ("nvmf: Add rpc to add listeners to subsystems")
Change-Id: I86263fb1c53ed6ab48fe70917686d78a4a7ce28d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398870
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The construct_nvmf_subsystem method's "listen_addresses" parameter is
now optional, and new listen addresses may be configured at runtime
using the "nvmf_subsystem_add_listener" method.
Change-Id: Ie0217c5d112e278cc0491a561753f50ed877d842
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/395556
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add the SPDK NVMe-oF target programming guide based
on the most recently implementations of SPDK NVMe-oF
library.
Change-Id: Idcd5a5ba9a2e4e04392adeb6230d4b18e98dd8e5
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393631
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
It's at least the beginning of a Programmer Guide.
Change-Id: Ifb0a6a1eefde83ef398f0dc6472c57e9faf4eacc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/398104
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a user guide, so move it to the right spot.
Change-Id: I8e50fdb95e6a982b444efd0e0ae55cd4b43e3017
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/397636
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is really a user guide, so move it there.
Change-Id: Ia6e26ac82be73a0a40fe41836c987c72ec206ed7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/397635
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These are duplicate links and they really are user guides, so remove
them from the modules section.
Change-Id: I0d3bdc235c75f9faa2501984db812dd525cf4fc2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/397634
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make these two documents link to one another.
Also do the following:
1) Make "Event Framework" a Programmer Guide
2) Update some of the text about pollers to reflect recent changes.
Change-Id: I3dfbcde0dadcf69b7c165f7bad5bee00d3c10d1f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/397633
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Blobstore default cluster size is currently 4MiB,
but default lvol cluster size overrides it to 1GiB.
Additionally add -c flag in lvol tests to set cluster
size for tests.
1GiB was fine without thin provisioning, but we do not
want to allocate and copy 1GiB of data for newly allocated
clusters on thin provisioned logical volumes.
Note that 4MiB is same as default for Linux LVM.
lvol test case 601 had to be modified to create a malloc
LUN less than size of default cluster size. This test is
supposed to fail - without the change here, creating the
lvolstore would work, but the script still considered it a
PASS. Defer fixing that to a separate patch - for now just
keep the same test process.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic05defbf8e641f613f0ec74175a37bc25986e496
Reviewed-on: https://review.gerrithub.io/397562
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Thin provisioning for lvol bdevs enabled starting with 4132ac5.
Unmap is now supported on lvol starting with patch cf6fe9b.
Change-Id: I10c47f9e1af31785caf27fd73750461c9cde57c4
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/397573
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0b215aea443782bdf8ee6772dd2db562597f0d3c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394116
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reworded some sentences, updated current limitation
list, and dropped the outdated `Multiqueue` section.
Change-Id: Id57777430f00b80c68cadf4c600e4ec89fa3c4e0
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/397082
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The help message was introduced in patch
5f247660d7 [1].
[1] 5f247660d7 ("setup.sh: add help message")
While here, also removed "Make sure you aren't using an NVMe
device as your boot device." note. This is no longer the case,
as we're now checking for active mountpoints before unbinding
NVMe devices.
Change-Id: I722fc25d095640505e6afe05cae4f9c39c40922e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396591
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Remove outdated section about pre-release kernels; the Linux kernel
support has been in released kernels for a while now.
- Switch to ./configure rather than `make CONFIG_...`.
- Put the target configuration into subsections, and move it earlier in
the doc.
- Clean up some wording and style issues.
Change-Id: I86e79226a73c4e36ed8a440294957ea824f24f0b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/395869
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Update the content to support Intel specific commands and
add a note on the usage about spdk.conf file.
Change-Id: Id9bcac3719c951d3f4e9f6fe922004b3c325fabb
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/394563
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ie6afc95e86534827786fe29e7b142bf61f2dd230
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/394988
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Attempt, to the best of my ability, to explain
I/O devices, threads, I/O channels, asynchronous C
programming best practices, and other related
concepts.
Change-Id: Idd6bdb3a06df71a642b88cdaa7cc37c13655753b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/393200
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I2077133fc8f98d1fc1020d617e50867871d8e841
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/392986
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is designed to address some of the more basic
questions we often field.
Change-Id: I53ead3044abf8add0c912e0ce9721e995ae7a6e7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/392983
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I21b793c27aa7f24ffa1235c4a2c43d594148a689
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/392982
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also fix a few markdown issues.
Change-Id: I4e7c95f2a44bb321456f3868e8beb6661c61c26f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/392981
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add more information like Running Core, RPC related and so on.
Change-Id: Iad05d254255884a113031366614c75a324a8b5a3
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393355
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reason: Core binding is not supported in NVMe-OF
subsystem anymore.
Change-Id: I92a876bf1a150b7833ebb049f3284e589f187edc
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392914
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I667df64dd2363c606f39b52c0411c6ba7f55d5ba
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391370
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This can be used for two purposes:
1) more quickly iterate the blob list, avoiding
metadata pages that are valid but not the first
page in the blob's metadata list
2) close races between delete and open operations -
now we can clear the bit in the blobid bit array
when the delete operation is in progress, ensuring
no one else can try to open the blob
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3904648fd6fa656cb98c9e17ea763ed5a84ef537
Reviewed-on: https://review.gerrithub.io/391695
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I49fa42e85f9239869d640b248330529ba8c2243a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391047
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added new keyword 'Target' that will replace 'Dev'.
'Dev' is still usable, but deprecated and will be removed.
Change-Id: Iafd6114ef2cc5b2f8d58497e9fb454a3a237ed16
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/388568
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I76f8f1581b13e804a17f2ad38880469a40f1024b
Reviewed-on: https://review.gerrithub.io/390806
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is being replaced by the -r command-line option.
Change-Id: I94a25f91bd26ea3b8da1789660742630f0052901
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390325
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3cbb52cd9a4201704423b49eae74935b8a33b0fd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389903
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch add another provider for libvirt.
There are still few additional problems in vagrant-libvirt like:
-most recent vagrant-libvirt (0.0.39+)
-most recent qemu 2.10+
-must be run as: vagrant up --provider=libvirt
Change-Id: I6ad3497cd06bb1a490259c0afc93c6ea610967f8
Signed-off-by: Daniel Mrzyglod <daniel.mrzyglod@gmail.com>
Reviewed-on: https://review.gerrithub.io/389551
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Similar flags will be added at the blobstore level in a future
patch.
This allows backwards compatibility - i.e. allow older blobstore
applications to open blobstores created by newer blobstore
applications with new features. Any blob's using a new feature
should have an associated flag set in one of three new flag masks:
- invalid: if a bit is set in this mask that the application is not
aware of, do not allow the blob to be opened
- data_ro: if a bit is set in this mask that the application is not
aware of, allow the blob to be opened, but do not allow
write I/O nor any operation that changes metadata
- md_ro: if a bit is set in this mask that the application is not
aware of, allow the blob to be opened for performing any
kind of I/O, but do not allow any operation that changes
metadata
While here, bump SPDK_BS_VERSION to 3. We intend this to be the
last change made to SPDK_BS_VERSION - future versioning will be
done via blobstore or per-blob feature flags instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If059e38bfffbeec25c849a7629a81193b12302c4
Reviewed-on: https://review.gerrithub.io/388703
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
1) Rename to "User's Guide".
2) Link to @ref getting_started.
3) Note that QEMU 2.10 now supports userspace vhost-scsi, and
the SPDK patches are only needed for vhost-blk.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id3508be4714fa35e9846d47019caf859cef65192
Reviewed-on: https://review.gerrithub.io/389412
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Also add a small description of what the script does.
Change-Id: I8a9373d204e7abc83772b5d5a95de30ca260dd7c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389916
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia688b082f2b5a74b78ebd1fe7a3f0ae33e084a8c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389920
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
