This reverts commit 2246a93718.
We are seeing a lot of failure on io_device lookup in the test
pool. These only showed up after this patch was merged and sees
the most likely culprit. Reverting this patch for now while we
continue debug.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2ab098319dfae3a5356eb4fe0dbf9f4af2d2eea5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8199
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case IFS was modified in the environment where print_backtrace()
was called, it could impact the cmd substitution used for seq'ing
the main FUNCNAME loop. Example:
========== Backtrace start: ==========
/home/vagrant/spdk_repo/spdk/test/common/autotest_common.sh: line 980: 1
2
3
4: syntax error in expression (error token is "2
3
4")
Avoid that by resetting the IFS to its default value, but also,
replace said $() with arithmetic evaluation to avoid it altogether.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I4ab098319dfae3a5356eb4fe0dbf9f4af2d2eea6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This should be vfio-user-master now. vfio-user-v0.6
branch is obsolete.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Iaa0b429c4de13c59e1f58fe59149367f941d42f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8062
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In examples/bdev/fio_plugin/fio_plugin, it will include fio.h which
defines the RB_ROOT macro. To workaround the RB_ROOT redefined error,
rename RB_ROOT to _RB_ROOT.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: Ied4f835e4d1657ca5a0a80c13c72845c774618d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8044
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use the macros for red black tree provided by Free BSD to speed up
io_device lookup.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: Ib3bd382bbeb610503194e7d7bfd569f60a0d0121
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7894
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I696870dbdc9fa654e270d9fe76f12b7044455527
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7946
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The original function will disconnect queue pairs first and then free
controller memory finally, so rename it to vfio_user_destroy_ctrlr().
Change-Id: Idc235e4186bd4164be712fc9d4cda4991efc6248
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7624
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
The coming destroy_ctrlr() function will disconnect
queue pairs and free controller at last, so here
rename the original destroy_ctrlr() to free_ctrlr().
Change-Id: I527b2742142d60b0383be5a12391c77dd50d47a7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7623
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
The original destroy_qp() only release the queue pair
related memory, and free_qp() will be called inside
destroy_ctrlr() function, so also remove one duplicated
line here.
Change-Id: I2a06a6704b514361685068acda4e65ed5d502f0d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
The controller concept in NVMf is like a session, for any
new connection in nvmf_vfio_user_accept() with the endpoint,
we treat it as a new controller, we don't need the `ready`
field in controller to indicate the connection state, we
need the connection state in endpoint, so here just use
endpoint->ctrlr point to indicate the socket connection
is valid or not.
Change-Id: I588dbba7973cb61a1d79d81324a43e052f7dafb0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Adding iov to the spdk_bdev_zcopy_start function enable spdk_bdev_zcopy_start to
be used by transport layers as the iov is owned by the transport command
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I6d2be7f49566048bf25b7711ada8d2fb49fea6ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
ZCOPY emulation is not required. Modules can check if the bdev module
supports ZCOPY. If not supported the module uses the existing
READ and WRITE operations.
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: Idac0a4d27a79a6c7e567c420e15637e826c347c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6815
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
If a reconnect fails, we restore the original
transport_failure_reason after we're done with
the failed reconnect. Save the original reason
in the qpair itself rather than a local variable,
to facilitate upcoming changes where connect will
be asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I20ff43fc687a379aa5c930e17cf3ff8d730320be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8116
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously we were only checking trtype==PCIE to
determine whether a controller was fabrics. This
skipped the vfio-user case. So use the new
spdk_nvme_transport_id_is_fabrics() API instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I81f26853f44b1c47522ce6354e5aa4a905796bd0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8089
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: Use the new function in order to reduce duplicated code.
Change-Id: Ie848c7586575b3f0bb617d7e767cf459b43d4783
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8174
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Consider this:
foo() { echo bar >&2 ; }
set -x
foobar=$(foo 2>&1)
[[ $foobar == "bar" ]]
The above test will fail since $foobar will also include tracing
strings as stderr is where set -x redirects the output. Since in
some cases this may troublesome, replace stderr with a dedicated
fd allocated dynamically.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia6609e4463b371c07fab42d2bd291c9e43742df5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8158
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function was unintentionally including trace lines in its output
by playing with stderr (where -x is redirecting its output by default).
Avoid that by simply listing the devices and doing proper checks from
within the actual test.
Spotted in https://github.com/spdk/spdk/issues/1973
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If15375aca152aaa49267c9cc51e70fd859685ea1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8156
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Nvme-cli submits a RESCAN IOCTL after a format command to
update any information that may have changed during the
format, such as LBA Format. This patch adds support
for RESCAN by executing nvme_ctrlr_update_namespaces to
update the controller information.
Fixes: #1964
Change-Id: I9f03e00a7f39339947ff02390f69ce806e1cfa0e
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8146
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Rather than to rely on schedulers to access and modify
last_stats values over multiple scheduling periods, move that
operation to event framework.
Providing this to the schedulers in generic manner is better
than enforcing that each scheduler has to keep track of this
data on their own.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Icaf3b4af80d86fafaddf328fd230db9743d21ab5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This UT was not working as intended, and was covered by
scheduler implementation and direct modification
of the lw_thread stats in UT.
A single _reactor_run() iterates over all active pollers.
If at least one returns busy, so does the thread.
Thread load at the begining of UT is not 'low', but 100% busy.
To emulate loads outside of the 100% busy/idle, multiple
spdk_thread_polls need to be exectued.
As such to keep this case simple, the busy poller is removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I21b4c607977ed5926e0bb2743c33636cfc49f328
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
At no point in the UT thread and reactor stats
were verified. This patch makes sure that those are
checked and points out a glaring issue fixed in the
next patch.
Please note that spdk_get_ticks() and spdk_delay_us()
increase a single global value, which does not play
well with tests simulating multiple reactors.
As such each round through reactors resets the
global timer and verifies it at the end.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I27878fe35c1606ec20c548fe3bb5ede0102c8a63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8020
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
A Security Receive command with the Security Protocol field cleared to
00h shall return information about the security protocols supported by
the controller, so we can check the TCG security protocol is supported
or not before sending it.
Fix issue #1961.
Change-Id: Id061defe45db981b276e2794fd0b59f8db70b7f4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We will print a notice log if the drive can support SECURITY
SEND/RECEIVE commands but not OPAL, so remove the error logs.
Change-Id: Ib26aa727ad1e703d53c387af8507b920606ea9c6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8055
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Getting/putting the channel races with getting real IO channels
causing issues with an upcoming design. Avoid it entirely by using
the first worker channel to get the capabilties.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I750a8d59e294f4cda9f71f3327afc03e15342768
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8170
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Perf improvement, directs DSA to write to cache as opposed to
mem.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I0d6ba157af8f1b54f8aae3b8e54a6f7754e4a9de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8169
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This results in a significant performance improvement when using
HW offload engines.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I54d3e39f186c9f878fcf8bed8e9242e29d1e1bf1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8162
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
We already keep a list of outstanding completion locations to
poll and were previously polling all of them. New ones are
added at the tail and we poll the oldest first from the head
so if we break when we find a slot that hasn't completed we
can get more work done while the HW finishes. This is a proven
performance improvement in limited testing.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icc15041605586f9a31435d447d253c381c00b1f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8161
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
1. struct pxdcap.per is changed to struct pxdcap.rer
Which matches the name in the nvme spec.
2. use new API return value.
3. update specification changes.
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: Ida421c4cffd1c65d550e83011ab123b321ea9dff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8088
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
After commit a31e319f "nvme: init discovery ctrlr using nvme_ctrlr_process_init"
SPDK will not initialize vfio-user subsystem if we didn't specify it
in the command line, so add this parameter as other transports already use it.
Change-Id: I5331459e9a88d8d94fa8b6ce693e086516b9f0bc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8120
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
vfio-user transport `req_complete` callback will zero the internal
NVMe command and response fields, the common NVMf library should
not use them after the callback, so here we use stack variables
to save them before the `req_complete` callback.
Fix issue #1965.
Change-Id: Iff2342b6095d9496cdf112d657a0a99ce1fb5d12
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8129
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By the next patch, nvme_io_channel will be used as an I/O channel
to a single nvme_bdev. This channel is created to a single
nvme_bdev_ctrlr and has a corresponding I/O qpair. nvme_io_path
will be a better name especially when we support multipath.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic34162f3c383676c5249396a09173329fc6febce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8095
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously only a single thread could submit abort commands for admin
commands and it was the thread of the corresponding controller.
When we support multipath, we need to traverse the list of controllers
to which the target admin command is submitted. Threads of controllers
may be different.
On the other hand, the previous implementation made the I/O flow very
clean, but the I/O flow will not be clean if there are many controllers
and the subsystem does not have its thread.
This patch changes the policy so that any SPDK thread can submit abort
commands for admin commands.
Then when multipath is supported, we will be able to traverse the
list of controllers simply on the current thread to abort either I/O
command or admin command.
We already are able to submit any admin command on any thread anytime
including abort command. Hence this will not cause any issue.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib69de33f2e84b03861c7d95ce060035bdb589e4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8121
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Initialize ANA state of each namespace to optimized regardless of
whether ANA is supported or not. This will simplify the code to get
the optimal I/O path because we do not have to care if the namespace
supports ANA.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I24dfe08674af398671de6528b884e9d82409eeae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7890
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is unlikely that managing namespaces by nvme_bdev is complicated.
Hence we do not need the helper function nvme_bdev_to_bdev_ns().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I77b4dcd12b2f2a219f58e5bc7b7e51dd10635da4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8118
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
We can hold bdev_io directly in nvme_bdev_ctrlr as an outstanding reset.
We can put spdk_bdev_io_from_ctx(bio) into a parameter for a few
functions because it is used only once in a function.
Passing not spdk_bdev_io but nvme_bdev_io to bdev_nvme_verify_pi_error()
remove unnecessary substitution.
This is a little more efficient and simplifies the implementation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If49ad9fa42abf27decf3afcd8c994f55faa3bc70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8094
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
