Previously the connection was scheduled to another core just
after setting conn->full_feature to 1, but conn->state was still
ISCSI_CONN_STATE_INVALID. The connection started to run on another
core but could not run normally until conn->state became
ISCSI_CONN_STATE_RUNNING. conn->state was changed late to
ISCSI_CONN_STATE_RUNNING after sending the first login reponse.
This gap window had caused intermittent critical failures.
Based on this analysis, this patch changes to call
spdk_iscsi_conn_schedule() just after sending the final login response.
Whether any login response is final or not can be known by checking
conn->full_feature is not zero.
Fixes#785
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8ea55fef27e2f332fcd789d32daf479a24c0588d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In some test cases, unknown iSCSI PDU other than the login request
has been sent to the iSCSI target when the iSCSI target is not in
runnable state, and it has caused failure in iSCSI target.
To know what PDU was received by the iSCSI target, this patch changes
the iSCSI taget to collect dump of the PDU.
SPDK has already the SPDK_LOGDUMP macro but the SPDK_ERRLOGDUMP macro
will be appropriate in this use case and added. Then the SPDK_ERRLOGDUMP
is used in iSCSI library.
We can decode PDU and output any format easy to read by human, but
creating good format is not easy task and error prone. So this patch
uses simple dump.
Dump outputs like:
PDU
00000000 40 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 @...............
00000010 0b 06 00 10 ff ff ff ff 00 00 00 5a 00 00 00 03 ...........Z....
00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3ed2fca7fec24ccff17b89ba749a58c397b72c13
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456952
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
SPDK_SUCCESS is a remnant and all other SPDK libraries have used
just 0. So this patch removes SPDK_SUCCESS from iSCSI library and
uses 0 instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie33fd26238411e994ea9ea0c898da1abb502cad6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch uses the newly added API spdk_dif_update_crc32c() when
DIF insert/strip is enabled.
Change-Id: Icf32a0ddef6cf92b0887b38495457e7fcac30987
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iscsi_sgl_append_with_md had not increment _iscsi_sgl::iov
by appended count of iovecs. Hence if data digest is enabled,
data segment will be overwritten by data digest.
This patch fixes the bug.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibcdacb883b2b97ad86cfc39a035c76264090401d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DIF context had been got for every read of data segment but
DIF context is not changed and so getting DIF context once
when allocating data buffer is enough and is done in this
patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0f386ab594a0d9076fa0206d5fc240f5c790181d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456772
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
The only caller iscsi_conn_handle_incoming_pdus accesses the returned
pdu only when the return code is 1. So we can remove update of
_pdu for other cases in spdk_iscsi_read_pdu.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I54b9f050c3b45c87f4797a90d7606638d6c821ad
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456771
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of just return "-1", the proper error detail will be
returned and reported out.
Change-Id: Ief900494081ddc9ae6329ee7a56723d9cb5efe13
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If the qualified core wasn't found, then we should compare
spdk_env_get_core_count() with i, instead of lcore.
Signed-off-by: Li Feng <fengli@smartx.com>
Change-Id: Ie92f56712b7f0e51636008fe12fff5584b6be8ab
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456415
Reviewed-by: wuzhouhui <wuzhouhui14@mails.ucas.ac.cn>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
According to https://tools.ietf.org/html/rfc3720#page-196,
Error detail of "Authorization failure" is for the case that
the initiator is not allowed to the given target.
Change-Id: Ie628c4c857e965aa6694399a9832ce0501e50745
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_iscsi_read_pdu has been used only in a place,
iscsi_conn_handle_incoming_pdus. iscsi_conn_handle_incoming_pdus
classifies return code of spdk_iscsi_read_pdu to
SPDK_ISCSI_CONNECTION_FATAL, 0, or 1.
Using 0 instead of SPDK_SUCCESS in spdk_iscsi_read_pdu matches
iscsi_conn_handle_incoming_pdus and is done in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I231c2e70a094c26af2c8eb60d77b92d880674901
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456770
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Added a utility function for the cleanup related operations.
Change-Id: I4e49dd9c2da899a5bda289bc36778b636af9c5df
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456599
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Recently DIF library refined _iov_ctx to support multiple iovecs
for DIF insert and strip operations. iSCSI library is the first
user of DIF insert and strip, and so rename _iov_ctx to _iscsi_sgl
to match DIF library. Names of related helper functions and
a member variable are changed together.
This change will be helpful to extract common part into a specific
helper library if necessary in future.
Change-Id: I3be3b6c3c476b0309ffafdecf3181fb2bb19abc6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455620
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adopts the good practice in DIF library, and unifies
array size and used count into unused count.
Change-Id: Ifde15d1fa66dbd2578da771b5500e45a84664f63
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455475
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We throttle the number of data_in operations per
connection. Currently after a read is completed,
we try to send more data_in operations since one
has just been completed.
But we are trying to send more too early. The data_in_cnt
doesn't actually get decremented until after the PDU is
written on the socket. So this results in a case
where data_in_cnt == 64, and all 64 read operations
complete before any of those 64 are actually transmitted
onto the TCP socket. There are no more read operations
waiting, so we won't try to handle the data_in list
again, and if none of these 64 resulted in a SCSI
command completing, then the initiator may not send us
any more read I/O which would have also kicked the data_in
list.
So the solution is to kick the data_in list after the
PDU has been written - not after a read I/O is completed
back from the SCSI layer.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia01cf96e8eb6e08ddcaaeff449386e78de7c5bc5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The datain handling code path will set the LUN to
NULL if it finds a task's LUN has been hotremoved.
This could happen before the iscsi hotplug routine
actually gets a chance to run. If this happens,
one of these tasks doesn't actually get freed, and
then will be freed after the lun is closed -
causing a segfault in the bdev layer since it may
have a bdev_io associated with it.
Found by running the iscsi_tgt/fio test after
applying the next patch in this series.
There's more work needed in this hot remove clean up
path - currently we are just freeing a lot of PDUs
rather than completing them with error status when
a LUN is hot removed. But let's tackle that
separately.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8d27f0c7a79ae91cb6504e5ff6ffc8e346c9e54c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455460
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It's 3 functions that are only called from this compilation
unit.
Change-Id: I033ced4c19ee2a33b9537c347532ea5706d02d6a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As a subsequent effort, this patch changes the interface of
spdk_dif_generate_stream to accept SGL data buffer.
This patch allows only a single iove. The next patch will allow
multiple iovecs.
Change-Id: I56f901d73ca3b9da4b56c213ebafcd7706b1fef8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453755
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently iSCSI target have used a single contiguous data buffer
both for read and write I/O. Hence spdk_dif_set_md_interleave_iovs
accepts a single contiguous data buffer and its size as arguments.
On the other hand, NVMe-TCP target recently has changed to use
SGL data buffer instead.
DIF strip and insert will be supported in NVMe-TCP target next,
and updating spdk_dif_set_md_interleave_iovs to accept SGL data
buffer will be helpful.
This patch changes the interface of spdk_dif_set_md_interleave_iovs,
but allows only a single iovec. The next patch will allow multiple
iovecs.
Change-Id: I31b09814f8ec920e463a5b1be8fb88cad7d277fb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make this explicit instead of implicit.
Change-Id: Iab1b856648e1f11722e1f76602f1eee4bc4ed0b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454381
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When iSCSI target failed to start due to insuccificent resource like PDU pool,
one memory is double freed.
Change-Id: I1b68d4f0f130b024be9f8406c8d1611e92a27787
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453981
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This function was only called from a single place, so just
move the code there.
Change-Id: I78c05ef41ca0d5684385e80cb75d699453c90792
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This went stale and the code is currently in flux.
Change-Id: Ib0b2171f253db0f54d41573c07668eb3b2bd83b4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, this searched the list of cores for the one
with the fewest connections and scheduled there. iSCSI
is being migrated to a new threading model where the
threads themselves will float, so simplify this part
of the code while that's implemented.
Change-Id: I05a1ff51a45df9c176c0e57d7f1ae9e97928adcd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI is currently being adapted to SPDK's new threading model,
and this parameter doesn't make sense anymore. Remove it for
now until something functionally equivalent is added later.
Change-Id: Ia0e2f5aa81b72d99467c5a900619fbeeb42b2069
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We don't need to have operations to remove just the socket.
Change-Id: I00e0c7fb81af98d1c072ba126ce22b41954e313b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452728
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For migrating a connection, don't stop it entirely.
Change-Id: I0e09698e03127c04257485a0a2af262ed1a7761a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453017
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This restriction helps reduce the amount of padding when
printing out the event trace, allowing it to fit in a
small number of columns.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa31e5a6967c7b9bc7028069effb71533f80596f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452736
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was not used by any of the trace register descriptions.
Let's remove it rather keeping it around if we don't need it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idda809e2911db5be555ff6aa13695484a14bf665
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This function is in charge of scheduling new connections
onto cores. It used to be used to dynamically migrate
connections, but we no longer do that.
Change-Id: I2fa04a7dfb43bf9fae7902376ba5ba6d18744469
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452727
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This can use threads instead of events.
Change-Id: I8a55ad512038dd75218a9a6af17d135eba6949f7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452726
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_dma_malloc() is not required here, as the session
array is nether DMA-able nor shared between processes.
Change-Id: Ia9218d00eea8a3207abf07c1d78eaa585ffcad2c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450552
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
All error paths must free opts->nodebase and opts->authfile.
Change-Id: I655f112dd36bbd0dca6050bc5cc3ade1a5b05b7d
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451770
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the end of the patch series. After this patch,
delete_target_node RPC will wait for the completion of
removal of the SCSI device and then free the iSCSI target.
SCSI device holds passed callback and calls it in free_dev().
free_dev() is ensured to be called after all iSCSI sessions
are closed. So iSCSI target resource can be freed safely
after that.
Change-Id: I25921b4014207092b7b3845dfeae58bcdffa2edc
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450607
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We did this a while ago for login notifications - do
it for logout as well.
While here, just use SPDK_DEBUGLOG instead of printing
to a buffer first.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I77f566d139cd818428371ec887efeca6eee08898
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451062
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The next patch will add the function ponter typedef
spdk_scsi_dev_destruct_cb for SCSI device destruction.
Hence add lun to the names of descriptors and callback for SCSI
LUN for clarification.
This patch doesn't change any behavior.
Change-Id: I73f2bce9129f7a6f16770ab6ed18428b16589108
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450883
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch changes iscsi_tgt_node_destruct to be asynchronous.
spdk_iscsi_shutdown_tgt_node_by_name() uses the callback
provided by iscsi_tgt_node_destruct(), but
spdk_iscsi_shutdown_tgt_nodes() doesn't use it.
The reason is that during shutdown all sessions are terminated
already, and spdk_iscsi_shutdown_tgt_nodes() doesn't need to
wait for the completion of iscsi_tgt_node_destruct() by using
the callback. iscsi_tgt_node_destruct() will complete immediately
in this case.
spdk_scsi_dev_destruct() is not asynchronized yet and so
iscsi_tgt_node_destruct() calls its callback directly in this patch.
The next patch will replace the call.
Change-Id: I86911c5297a93560551e0404d6ea85f49d647c22
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450606
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch changes spdk_rpc_delete_target_node() to pass
rpc_delete_target_node_done() and its context to
spdk_iscsi_shutdown_tgt_node_by_name().
iscsi_tgt_node_destruct() is not asynchronized yet and so
spdk_iscsi_shutdown_tgt_node_by_name() calls the callback
passed from the caller directly for now.
The next patch will replace the call.
Change-Id: Ide2d9fcc6738e02de19f91249c21ac2d0d37138a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450605
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
delete_target_node RPC had not waited for completion of
spdk_iscsi_shutdown_tgt_node_by_name. This implementation
is not the direct cause of the deadlock issue in
spdk_iscsi_conn_stop() but changing delete_target_node RPC
to wait for completion of spdk_iscsi_shutdown_tgt_node_by_name
will prevent future errors.
spdk_iscsi_shutdown_tgt_node_by_name() is not asynchronized yet
and so rpc_delete_target_node calls rpc_delete_target_node_done
directly in this patch.
The next patch will replace the call.
Change-Id: I6a042028b93c36ca9f68e3b212141e101b33d394
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When any iSCSI target is destructed, if the target exits all corresponding
connections first, destructing SCSI device will be easier.
Hence, iscsi_tgt_node_destruct() starts exiting all corresponding
connections. Then it destructs SCSI device immediately if no active
active connections, or waits for the completion if there is any
active connection for the target.
Change-Id: Ibd4a29789faecfefccefa1153a519c43d040a00d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450737
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In iscsi_conns_cleanup(), g_conns_array was unmapped but was not
invalidated by setting MAP_FAILED.
So, find_iscsi_connection_by_id() caused segmentation fault if
it is called after iscsi_conns_cleanup().
Change-Id: Ib91c9240c62c2aaa32713dd4aa382d31e5ea2eed
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add the flag destructed to struct spdk_iscsi_tgt_node and
iscsi_op_login_check_target() refers it and returns
ISCSI_LOGIN_TARGET_REMOVED if it is true.
When destructing iSCSI target node, it will be nice if iSCSI library
can stop further connections are created but, connections are not
associated with any target node until processing login. Hence stop
creating sessions instead.
Additionally, when destructing iSCSI target node, if the flag destructed
is already set, return immediately, and the flag destructed does not
affect discovery session.
Change-Id: Ic73bdd93f2ca7d5ca1d2f897d5046cbc51650d5f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450881
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These change will be used in the next patch.
Change-Id: Ifdb4ccf20049b46e850122a4021cbbe7441e1270
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsequent patches will exit only connections belonging to the
specific target node. So add target to get_active_conns() as
an argument.
Change-Id: If0d9cad46614310e0fe17e69e75c1185146730f4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When target is specified, the function starts exiting any
connection that belongs to the target. When target is not
specified, the function starts exiting all connections.
Change-Id: I0dfb56ceac5ee36d10547a9ab9a0f768ca8e02ec
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out the operation to start exiting connections into a
function. This patch doesn't change any behavior.
Change-Id: I8f48961bcc95c480636e0e0d8fbb8ef029818d9e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450733
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
target had been set to the created session after returning from
create_iscsi_sess(). But create_iscsi_sess() has been used only in
a place and target has been already included in the arguments in
it. So set target to the created session in create_iscsi_sess().
Change-Id: Id65e6c5a1f76b995a7d0e9939ff3a2fce5daeb3f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI mutex had guarded both unregister operation and destruct
operation in a single critical region in spdk_iscsi_shutdown_tgt_nodes
and spdk_iscsi_shutdown_tgt_node_by_name.
Subsequent patches will separate unregister operation and
destruct operation, and so this patch separates critical region of
unregister operation and destruct operation.
Change-Id: I847915f8277c4475c034ca64fd07ccdd47659590
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsequent patches will make iSCSI target possible to wait for
completion of SCSI device destruction by using callback.
This patch moves spdk_scsi_dev_destruct() before starting to
free iSCSI target node resource as a preparation.
Change-Id: I9cfe7662a05b1211292a5cc448bbba60a929f356
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450582
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's possible that we get a request to abort I/O just after
a queued_datain_task has completed, but before we've had a
chance to remove it from the queued_datain_tasks TAILQ.
_iscsi_conn_abort_queued_datain_task wasn't accounting for
that which would result in an infinite loop.
Fixes issue #725.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Tested-by: Jane Lusby
Change-Id: I494ee78763d527d83dcb65f46563ee69bb975576
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450301
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
LUN ID is not converted from integer to structure and integer is
set to R2T PDUs.
Popular iSCSI initiators don't check this value and work correctly.
This patch uses the public helper function of the SCSI library
to fix the issue.
Additionally, private helper function to convert structure to
integer for LUN ID is replaced to the public helper function
of the SCSI library.
Change-Id: I9218c5ef7a8bfec43326c6584db7c6929fdd11a8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449963
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Right now they can only use memory from the socket
that performed iSCSI static initialization, which
doesn't make sense. Those mempools can be used from
a different socket as well, so don't restrict them
to any specific one.
Change-Id: I0def1c554ed6227ab0f0a7be107c4c1c61f40c96
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450055
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
My iSCSI target reported segment fault after memory allocation
failure, and add the addtional check here can fix the issue.
Change-Id: Iee3e497d7028fbface6d110c78e73965ef0f178b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449717
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A few private functions had still the prefix spdk_ in their names.
This patch completes the effort to remove the prefix spdk_ from
private functions in iSCSI library.
Change-Id: Ic1a1e85220edb72296ca4881bdf7b550c4f6b6b8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI library had used the prefix spdk_ for most functions regardless
of private or public. Using the prefix spdk_ only for public functions
will be helpful to distinguish private and public functions, and
will be helpful to investigate issues or do further improvement.
Besides in iscsi.c static variable spdk_arc4random_initialized had
the prefix spdk_, and change it to g_arc4random_initialized according
to the SPDK's good practice.
iSCSI library still have some issues but is more stable than before
and now will be the good time to adjust the naming rule to other
libraries.
This patch doesn't change any behavior.
Change-Id: Ia0b8585a7ce6662cabc0e6f57b7ccb8a40342297
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449396
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These function declarations are not used.
Change-Id: If525f4157e3fa9e5d718e6c7aa77db8584edd14c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449395
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_iscsi_conn_read_data was changed to use sock_readv
instead of sock_recv as a refactoring effort.
However this change caused about 3% performance degradation
for write I/O.
Hence this patch changes spdk_iscsi_conn_read_data to use
sock_recv and changes spdk_iscsi_conn_readv_data to call
spdk_iscsi_conn_read_data if iovcnt is 1.
Change-Id: I5fcad03ff23dee4e9954eee879225d3c493be52e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_iscsi_get_dif_ctx() didn't work correctly for Data In PDU
because we had to get iSCSI task from PDU directly for Data In PDU,
and lun_id was not copied in spdk_iscsi_task_get().
This patch fixes these bugs and the DIF strip feature was verified
after applying this patch.
Change-Id: I74d404b82c4a9502a9a8e166748f817d3c2e4368
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447884
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Generate and insert DIF for write I/O by stream fashion in
spdk_iscsi_read_pdu().
Verify DIF for read I/O in spdk_iscsi_conn_write_pdu().
Verification can be done in spdk_iscsi_build_iovs(), but how many
writes to socket is not known beforehand, and same range may be
verified multiple times. So verify DIF before starting to write to
socket.
Change-Id: I860637758164b7d518c38fe92356562cbbe3d8f8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446406
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This patch leaves metadata space in data buffer for read or write I/O
to generate and verify DIF.
For write I/O,
- in spdk_iscsi_read_pdu(), leave metadata space for every block
by calling spdk_dif_set_md_interleave_iovs() and then
spdk_iscsi_conn_readv_data(), and remember this in PDU.
- in spdk_iscsi_op_scsi() and spdk_iscsi_op_data(), set not data
length but buffer length to length of an iovec. The reason is
that the actual data length sent to SCSI layer will be larger
than the data length set in PDU. SCSI task holds data length
as an independent member and this change doesn't loose any
information.
For read I/O, in spdk_iscsi_build_iovs(), leave metadata space for
every block by calling spdk_dif_set_md_interleave_iovs().
The reason why DIF context is saved in PDU is that DIF verification
will be done in spdk_iscsi_conn_write_pdu() and DIF context will be
used there first.
Change-Id: Iac5739211f26a91b00a4ecf2f306bbecec3d78dd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446382
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Increase the size of write (data out) buffers and immediate
data buffers in the iSCSI library to store DIF. Increase is the
amount necessary to store 16 byte metadata block to the block
formatted iwth 512 + 16. 512 + 16 is the current maximum ratio
of metadata per block.
Use the macro SPDK_BDEV_BUF_SIZE_WITH_MD defined in
include/spdk/bdev.h for this purpose.
Besides, change the name of a helper function from
spdk_get_immediate_data_buffer_size() to
spdk_get_max_immediate_data_size() to differentiate the maximum
data size and the buffer size, and then to use the macro.
Change-Id: I626f8045ff706e1a6d79fa298261769bc96b7d8b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447011
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Ths patch adds an API spdk_iscsi_get_dif_ctx().
When opcode of BHS is SCSI command, spdk_iscsi_get_dif_ctx() extracts
CDB and LUN ID from BHS. When opcode of BHS is Data Out or Data In,
spdk_iscsi_get_dif_ctx() extracts TTT and get R2T task corresponding
to TTT, and gets CDB and LUN ID from the task.
Then spdk_iscsi_get_dif_ctx() gets LUN by using LUN ID and calls
spdk_scsi_lun_get_dif_ctx().
Additionally spdk_iscsi_get_dif_ctx() checks the state of the connection
and the type of the session is valid before starting decode operation
because contents of PDU is not reliable when the state of the connection
is invalid. The necessity of the check was found by the Calsoft test tool.
Checks and test cases are not matched yet but copying existing checks
from spdk_iscsi_conn_execute, spdk_iscsi_op_scsi, and spdk_iscsi_op_data
will be enough. The check added for Data Out is not necessary for Data In
but it will not be harmful for Data In.
Change-Id: Iba09e0ac3e760aa1c5b582a120596c49b9e9d51e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Upcoming patches will store larger data in the data buffer than
iSCSI Initiator transfers, and size of metadata is not known until
asking to SCSI layer. This addition will be used to avoid overflow
in them.
Change-Id: I43e15d0cfbfddcf01342325b134d90e3d7dae038
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds spdk_iscsi_conn_readv_data() to read PDU data
from network socket by using spdk_sock_readv().
Additionally, this patch changes the existing spdk_iscsi_conn_read_data()
to call spdk_iscsi_conn_readv_data() by creating a single struct
iovec.
Change-Id: Ied487bb71bd4261ad53c9f3744ae272e65f98d7a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446377
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The operation to read data segment of PDU will be enhanced to
support DIF insert operation ofr write I/O.
This patch factors out check data segment length operation into a
function to make the enhancement easier.
Change-Id: I4fbc3bd440192b3723435c9acf3b6b46d3ce4939
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_iscsi_build_iovs() has the common pattern among segments, and
introduce a temporal context to factor out the common pattern into
a helper function. This will make subsequent patches easier to add
code about DIF strip in spdk_iscsi_build_iovs().
Change-Id: I307d8d0501910071b23a8c0d8eb5e19a4d1684c4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446573
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Upcoming patches will support DIF insert and strip feature in
iSCSI target and the feature will be implemented by utilizing
iovecs.
Even when we support the DIF feature, we want to keep current
batched PDU flush, and current requirement that there must be
enough free iovecs to map all segments of a PDU is too strict.
This patch alleviates the requirement by passing remaining
number of iovecs to spdk_iscsi_build_iovs().
Change-Id: I6206322839c363e0ff5abe84bfd524bdc09e23ca
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446176
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To know the mapped length by iovecs, pdu length was got first and
then the size of partial written was reduced separately.
This patch unifies these two operations into spdk_iscsi_build_iovs().
Change-Id: Ic6f5eecc902b8e209ef00c010915f476ca16c002
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Building iovecs had been done in spdk_iscsi_build_iovs() and
fast-forwarding iovecs for the partially written first PDU had
been done in-line separately.
This patch unifies these two operations into spdk_iscsi_build_iovs().
Fast-forwarding iovecs is necessary only for the first PDU, but the
operation is applied to all PDUs after this patch.
Extra overhead will be negligible because usually at most two
iovecs are consumed, one is for the base header segment and another
is for the data segment.
Change-Id: I8feafac6d280439eb7cf73136107adbac820ae09
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446174
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iovec_cnt and iovec_array are very descriptive and good but iovcnt
and iovs are often seen in SPDK and will be enough.
Subsequent patches will add some changes on iovec operations and
simple and familiar names will be helpful to work and review them.
This patch doesn't change any behavior.
Change-Id: I89ff74809a0ddbb358e3fc8fdc353a47338cc3c5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446173
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
In iSCSI, SPDK_ISCSI_MAX_SEND_DATA_SEGMENT_LENGTH was an alias
of SPDK_BDEV_LARGE_BUF_MAX_SIZE.
iSCSI had used both interchangeably.
SPDK_BDEV_LARGE_BUF_MAX_SIZE means the buffer size of the large
buffer pool in generic bdev layer, and will be changed to be
configurable.
SPDK_ISCSI_MAX_SEND_DATA_SEGMENT_LENGTH had been used to negotiate
MaxRecvDataSegmentLength with iSCSI initiator and to split large
read data, but both are determined by not iSCSI target but generic
bdev layer.
Hence this patch replaces SPDK_ISCSI_MAX_SEND_DATA_SEGMENT_LENGTH
by SPDK_BDEV_LARGE_BUF_MAX_SIZE.
Change-Id: I822a5203a5092fe8b2d1ca3f93423f1acbfc782e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This macro constant is not related with data size and should be moved
to the separate location.
Change-Id: I73b337f5750c39d1f87591c2e372664019e50b95
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The helper function spdk_get_data_out_buffer_size() is a little
confusing because it does only returning macro constant
SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH.
The macro constant will be configurable and so the helper function
is not sustainable.
Replace the helper function simply by the macro constant.
Change-Id: I4ec300f61783da7bb712512603c2dd80987ec702
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The `len` field wasn't used at all and `reserved` is
no longer needed after we removed the paddr in the
previous patch.
This effectively cuts down spdk_mobj struct size by half.
Change-Id: Ica39f3a30e14ec1275a87d827dc41df5df9cf623
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The physical addresses in iSCSI are completely unused
as iSCSI does not perform any DMA on its own.
Change-Id: I350037b708a9f36f423e6ca6f7c822d8b6b95116
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This includes properly detecting when a key's name
extends past the end of the valid data.
Note that the unit tests were using sizeof() instead
of strlen() since some of the strings contain
NULL characters. This means that we should be
subtracting one to account for the implicit null
character at the end of the string. Note that the
iSCSI spec only says that the key/value pair has to
end with a null character - a key/value pair that
is split across two PDUs will not have a NULL character
at the end of the first PDU.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie95d6dd3b9ffa6a3902a31771ac4edb482418cce
Reviewed-on: https://review.gerrithub.io/c/442450
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since params are parsed directly from the PDU's data
buffer, we need to know the end of the valid data. Otherwise
previous PDUs that used this same data buffer may have left
non-zero characters just after the end of the text associated
with a LOGIN or TEXT PDU.
Found this bug while debugging an intermittent Calsoft test
failure. Added a unit test to reproduce the original issue,
which now verifies that it is fixed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic3706639ff6c4f8f344fd58c88ec11e247ea654c
Reviewed-on: https://review.gerrithub.io/c/442449
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Technically this check is correct, but the Linux kernel
target doesn't have it, and older versions of libiscsi
have a bug which result in stale ExpStatSN getting sent
resulting in terminated connections with the SPDK iSCSI
target at high queue depths.
Fixes#600.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I76eaf9dee2d733bfa3f8d43b86528de6b556cbd6
Reviewed-on: https://review.gerrithub.io/c/441981
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows for proper exit when error was encountered
during scsi port create.
Change-Id: Ie46faf7e515823cdc7383c25c4482bd2855b6368
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440676
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
During destructing a connection, if timeout of logout timer for the
connection occurs, spdk_iscsi_conn_destruct() will be called again
to the connection.
Segmentation fault by multiple calls of spdk_iscsi_conn_destruct()
have been observed when exiting one of the sesssions during IO tests
for multiple sessions.
Fix#574
Change-Id: I69873905486953bfb0cdb43b000b8e38ff9346ac
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/440466
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This supports 4KiB required alignment in bdevs such as
AIO and some variants of the crypto bdev.
Change-Id: Ib6ab2e8b07fbbcc5fe3f76e41e9d3c5a7ae3fb4d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440767
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Partially decoded request need to be free even if
spdk_json_decode_object() fails.
Change-Id: I72127c484636547fcf1389af232dab855622c69a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439372
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This follows the same trend as the mem_map APIs.
Currently, most of the spdk_vtophys() callers manually
detect physically noncontiguous buffers to split them
into multiple physically contiguous chunks. This patch
is a first step towards encapsulating most of that logic
in a single place - in spdk_vtophys() itself.
This patch doesn't change any functionality on its own,
it only extends the API.
Change-Id: I16faa9dea270c370f2a814cd399f59055b5ccc3d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For the write, this pool is used to store the incapsule
write data. So set the cache_size for better performance.
Change-Id: I6213c5849c2f9adb1cfcbe9e61c5fcb831702369
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/438149
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When exiting connection, all active tasks are aborted by
spdk_iscsi_tgt_node_cleanup() in lib/iscsi/tgt_node.c.
In spdk_iscsi_tgt_node_cleanup(), spdk_iscsi_op_abort_task_set()
is called by using a temporary task without associating PDU.
This call of spdk_iscsi_op_abort_task_set() have resulted in
assertion in spdk_iscsi_conn_abort_queued_datain_tasks() because
task->pdu is NULL.
The fix is to remove the assertion in
spdk_iscsi_conn_abort_queued_datain_tasks() and add check if
pdu == NULL as true condition.
This issue was detected by ip_migration test. ip_migration test
runs only in nightly tests now but it consumes only 26 seconds,
and the next patch moves ip_migration test to per-patch tests.
Fixes#544
Change-Id: I7719ad57d22c4354530adabfcdc5a818c804b841
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/438223
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
CHAP parameters in struct spdk_iscsi_conn had not been changed
even after iSCSI CHAP was refactored and enhanced.
Use names in iSCSI subsystem throughout.
Change-Id: Ic61b0db42adaa406ab48cf3857a4c2859c88690d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/437056
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Factor out negotiation of CHAP params from discovery session and
normal session. Additionally separate negotiation of digest params
from CHAP params.
Change-Id: If3419262c88b95de5c7c1ec7057bcbaa67e9df62
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/437055
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is the callback type used for message passing. The
old name is easy to confuse with the callback to pass
a message to a thread or the upcoming callback to
spawn a thread.
Change-Id: I5fd63b57c4be2a4262a197850e6de4901be03ee7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/435941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For split SCSI read command, if there is any failure in the sequence of
it, the first error must be propagated to all subtasks of it.
For split SCSI write command, if there is any failure in the sequence
of it, the first error must be propagated to the primary subtask.
Before this patch,
for read task:
- any failure is propagated to already completed subtasks, but
is not propagated to any subtasks not completed yet, and
- if any failure occurs in non-primary subtasks, it is not propagated
to the primary subtask.
for write task:
- if the primary subtask completes after any failure of non-primary
subtasks, the failure will be overwritten by the success of the
primary task.
This patch fixes these issues.
Change-Id: I2d878798cbb40a8c5bd6a6fe5efb32b8de4a8ecd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436673
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The possible cause of failure in spdk_iscsi_reject() is only -ENOMEM,
and SPDK_SUCCESS is 0 and SPDK_ISCSI_CONNECTION_FATAL is -1.
Hence just calling spdk_iscsi_reject() as return value will be
enough.
Besides, one redundant return path was found and fixed in this
patch too.
Change-Id: I37647a9ef6d0173d68d1017443d5a1d5604c1e64
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436644
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Current implementation is a little complicated and a little
refactoring will improve maintainability.
Change-Id: I23bdbe6a0e14739631c4b4f211bedefc9742f410
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436447
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following change will make iSCSI connection management easier to read.
Before:
- _spdk_iscsi_conn_free(conn) is called by _spdk_iscsi_conn_check_shutdown(conn)
or _spdk_iscsi_conn_destruct(conn).
- spdk_iscsi_conn_remove_conn(conn) is called by _spdk_iscsi_conn_free(conn).
- spdk_iscsi_conn_free(conn) is called by spdk_iscsi_remove_conn(conn).
After
- spdk_iscsi_conn_free(conn) is called by _spdk_iscsi_conn_check_shutdown(conn)
or _spdk_iscsi_conn_destruct(conn).
- _spdk_iscsi_conn_free(conn) is called by spdk_iscsi_conn_free(conn).
This refinement is done by the following:
- Call _func() by func(). func() is parent of _func().
- Inline spdk_iscsi_conn_remove_conn(conn) into _spdk_iscsi_conn_free(conn).
Change-Id: Ia510df1f2921224fcfc51dad7bb85a1ac6197698
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Moving error path to the end of the function will be easier to read.
Change-Id: I35bfd9b12d83ccb6fffe159b68dd08c87f6de0fb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436229
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some poller's return code don't match comments or are always -1.
We will be able to add more meaningful return code and contribute
to improve SPDK statistics.
Change-Id: Ia3eda31a32a3a76bc75c9860cc32cb86ce588904
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This direct call of LUN reset has caused unexpected behavior
during heavy stress test.
Apply correct LUN reset handling for this case too.
Even if there are multiple LUNs, LUN resets are serialized in
the SCSI layer by previous patches and parallel calls of LUN resets
will not cause any issue.
Change-Id: I920e2864ef0fb41c6bd2b6153ef3caff6876e893
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436115
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch is for ABORT TASK SET and LUN RESET.
iSCSI layer doesn't have pending queue and hence if the target task
is read task and is queued in queued_datain_tasks, it must be
aborted before submitting ABORT TASK to SCSI layer.
Aborting the target task may not complete by an iteration because
submitted read tasks are limited. Hence use poller to complete abortion
by repetition.
Change-Id: Idabf4931d751ee698e9809eafd5c151b979f048b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By up to the previous patch in the patch series, unexpected behavior
due to write tasks in task management commands have been fixed.
But unexpected behavior due to read tasks in task management commands
have been still observed.
Remaining patches in the patch series will fix the unexpected behavior
due to read tasks in task management commands.
This patch is for ABORT TASK.
ABORT TASK is not supported in SCSI layer yet. But the initiator
doesn't care about the failure is due to not-supported or failure.
It must be avoided that the task management command returns SCSI Good
but some tasks are not aborted and return SCSI Good later. On the other
hand, it is acceptable that the task management command returns
failure but some tasks are partially aborted.
Hence this patch adds operation without checking the support status
in SCSI layer.
iSCSI layer doesn't have pending queue and hence if the target task
is read task and is queued in queued_datain_tasks, it must be
aborted before submitting ABORT TASK to SCSI layer.
Aborting the target task may not complete by an iteration because
submitted read tasks are limited. Hence use poller to complete abortion
by repetition.
Change-Id: I030a8b2f19c2f7c7d2f7b0b2c633579534db631b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By subsequent patches for iSCSI, spdk_scsi_dev_queue_mgmt_task()
will not be called directly from the function that knows TMF code,
and currently setting TMF code to SCSI task is done in
spdk_scsi_dev_queue_mgmt_task().
Hence after subsequent patches for iSCSI, to hand off TMF code to
SCSI task, any dynamic context will be required.
To avoid the dynamic context, extract setting TMF code from
spdk_scsi_dev_queue_mgmt_task() and put appropriate place for
each call of spdk_scsi_dev_queue_mgmt_task().
Additionally, in spdk_abort_transfer_task_in_task_mgmt_resp(),
ref_task_tag is got from PDU but getting it from SCSI task is
much easier. Hence get ref_task_tag from SCSI task in the callback.
Change-Id: I7add9290598d2df7cfcf1506ec75d74c70c0f236
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Task management functions don't require performance. Serializing
execution of task managment functions will sipmlify and stabilize
the logic and will be helpful for upcoming patches to support
other task management functions.
This patch introduces two queues, pending and submitted queue,
and serializes LUN reset exection and makes LUN hot removal
wait for LUN reset.
Besides, checking if LUN is NULL is moved to the upper layer as
same as IO task submission.
Change-Id: Ia0cf3f437a745ee70fc9b17744cc63c833690dda
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434764
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As described in RFC3720, task management request will act on all
the commands from the same session having a CmdSN lower than the
task management CmdSN.
Current implementation clears all R2T tasks without checking CmdSN.
This patch changes the implementation to clear only R2T tasks
whose CmdSN is smaller than the task management request.
Additionally this patch adds to UT code to verify the change works
as expected.
Change-Id: I0b368cb13741bc05259924d27793438e9250b951
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Current immediate calls of clear_all_transfer_task() and del_transfer_task()
will cause unexpected behavior during heavy workload which cause repeated
reset operation.
Observed behavior is similar to Github issue #457.
Change-Id: Ide2b05bff8300872881c8b039f7a62af48d16cfd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434760
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SCSI persistent reservation feature need to get the TransportID
for the I_T nexus, so when creating initiator port we also
set the TransportID according to the specification, while here,
we use the format code 0x1 for the TransportID.
Change-Id: Ib45bec04bf0e33e2b0f611dd3846597f4176d069
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/435212
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Previously, if want to know which mask bit is used for specific
trace group, the only way is to check source code. Now list
each trace group with its trace tpoint group mask bit in
usage message
Change-Id: I7a85fe9c0885f1919f6ffbdc97dab81f1986fb07
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/435448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
According to the RFC3720, the length of initiator name and
target name should not larger than 223 bytes, while here,
add a check for initiator/target name.
Change-Id: I1517a4c4e1b0a944b239665f38f5dfb46f0075d2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/433797
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Printing messages every time an iSCSI connection logs in or
logs out/terminates is too noisy. Make these DEBUGLOGs
instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifc1014e4f8dce414a1c4ef75ea6b6749954083cc
Reviewed-on: https://review.gerrithub.io/432606
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since a PDU can be sentout in many times, so this
function is called multiple times, so move the
caculation function in spdk_iscsi_conn_write_pdu
Change-Id: Ib4da4a74c17709d98e4b01c2e76428021afea947
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/429931
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A major iSCSI initiator requires iSCSI targets to handle base64
constants for CHAP packets from the initiator.
This patch enables the SPDK iSCSI target to handle base64 constants
for CHAP packets from the initiator.
Change-Id: I276eb73113c40baa322904fe562d5b6016cccf33
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/431086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In RFC3720, the following terminologies based on RFC1994 are used:
- CHAP_A=<Algorithm>
- CHAP_C=<Challenge>
- CHAP_N=<Name>
- CHAP_R=<Response>
- CHAP_I=<Identifier>
The next patche will support base64 constants. Sticking to the terminologies
will be helpful to review and maintain it.
Change-Id: If7088163e7a3c6d771e1743415bc97fe97078d2f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/431083
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently only the iscsi => scsi dependency is defined to
demonstrate how the framework behaves.
Eventually, lib/Makefile will be populated with more lines
of the form:
DEPDIRS-iscsi : scsi log conf event
This line will ensure that the iscsi subdirectory is built
after the specified dependency directories.
Then the lib/iscsi/Makefile also defines:
DEP_LIBNAMES = scsi log conf event
This line adds dependencies from the iscsi.so to the specified
libraries.
Ideally we could avoid this duplication by passing the DEPDIRS
value to the lower level Makefile, but that breaks down when we
start considering event/subsystems/* libraries. So for now we'll
need to duplicate it. Incidentally, DPDK also duplicates the
dependency information like this.
While here, remove use of $(MAKESUBDIRFLAGS) in spdk.subdirs.mk -
it was no longer used anywhere in the tree.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If63cbc10ffa18ac6361e4210bd6196ffe88bec43
Reviewed-on: https://review.gerrithub.io/429287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By running random, 64KB, 70% write, and 30% read workload and periodical
TCP disconnection from the initiator, segmentation fault have occurred.
By investigation, when the last write task completed and dequeued
the primary write task in spdk_iscsi_task_cpl(), the primary write task
was already dequeued in spdk_clear_all_transfer_task().
This patch dequeues all primary write tasks after all outstanding
tasks complete.
After starting to exit the connection, the connection will not receive
any command. Hence waiting for completion of all pending tasks first will
avoid double dequeue safely.
Change-Id: I8e2b6b756be3a6e096675acc81cdb93fb6a7e350
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/430397
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next patch will change spdk_iscsi_conn_destruct() to fix the
Github issue #457. This patch is a preparation to that.
Change-Id: Iaf1c8a3fe8514d6bbd9f61f19f87b0bb2c27e76e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/430402
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only calling spdk_clear_all_transfer_task cannot solve all
the hotplug issue. The iSCSI task may successfully return
and own the bdev buffer inside the iSCSI task, so we need to
call this flush pdu function.
Change-Id: I255173d0880334e8acccc980a4ce04c380f64435
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/428801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: We need to get the port info in other applications
(e.g., NVMe-oF TCP/IP transport)
Change-Id: I3a4636e764e44425436bb064cb0062c6f3e44035
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/428313
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This prevents the SPDK build from requirng unnecessary dependencies when
not compiling certain features. Also, fixes github issue #434
Change-Id: I7d0520474f3656ae32670313f2290e6b741c5ca8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/426131
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following changes are added in this patch:
1. Remove unused TRACE_ISCSI_CONN_ACTIVE and TRACE_ISCSI_CONN_IDLE.
2. TRACE_ISCSI_TASK_EXECUTED is added. This tracepoint can be used
to record TSC for every PDU, especially non-SCSI PDU.
3. TRACE_ISCSI_PDU_COMPLETED is added. This tracepoint is for SCSI PDU.
It will record the TSC which includes the cycles of flushing writebuf.
Change-Id: I277bb2ce57e3cd2fc6fcb25845abdf2c11ed062b
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/425036
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently all poll group operations are done on the core allocated
to the connection but spdk_env_get_current_core() is called in every
operation and they are not explicitly checked yet.
This patch adds check and uses conn->lcore to operate poll group.
Change-Id: Id3a882a51f4f2d7ed0074f9cd9a8ad5bd830234c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424743
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
According to RFC3720 10.8.5, value 0xffffffff is reserved
for Target Transfer Tag when sending an R2T to initiator.
Change-Id: I0d92539d7640d3a4ffc5f8452cfe16f34269e7d0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/425369
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
A major SCSI compliance test expects that the LUN field is reserved
(not to be checked) in the SCSI Data-Out PDU.
In that test, the LUN field in the first SCSI Command PDU is 0 and
the LUN field in the SCSI Data-Out PDU sent in response to the R2T
is 0xFFFFFFFFFFFFFFFF. The TTT field in the SCSI Data-Out PDU is 0xF that
is copied from the R2T. 0xF is valid as TTT.
Hence spdk_iscsi_op_data() returns Check Condition because LUN is
not found.
This patch changes to get LUN ID from not the LUN field in the SCSI
Data-Out PDU but the saved task.
The following is excerpts from iSCSI specification (RFC7143). The
behavior of the SCSI compliance test looks against the specification
but changing SPDK will be safer.
11.7.4. Target Transfer Tag and LUN
On outgoing data, the Target Transfer Tag is provided to the target
if the transfer is honoring an R2T. In this case, the Target
Transfer Tag field is a replica of the Target Transfer Tag provided
with the R2T.
On incoming data, the Target Transfer Tag and LUN MUST be provided by
the target if the A bit is set to 1; otherwise, they are reserved.
The Target Transfer Tag and LUN are copied by the initiator into the
SNACK of type DataACK that it issues as a result of receiving a SCSI
Data-In PDU with the A bit set to 1.
The Target Transfer Tag values are not specified by this protocol,
except that the value 0xffffffff is reserved and means that the
Target Transfer Tag is not supplied. If the Target Transfer Tag is
provided, then the LUN field MUST hold a valid value and be
consistent with whatever was specified with the command; otherwise,
the LUN field is reserved.
Change-Id: I110a7e396d1e517b2a39ca5e586ab2bb2d45e5f3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/425333
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
As long as source code and sample config file are checked, mutual
chap for discovery sessions should be enabled by either "Mutual"
or "CHAP Mutual". Especially SPDK iSCSI guides users to use not
"Mutual" but "CHAP Mutual".
The reason is that .INI config dump outputs "DiscoveryAuthMethod CHAP Mutual"
when g_spdk_iscsi.mutual_chap is true.
However "DiscoveryAuthMethod CHAP Mutual" doesn't work as expected.
When it is specified, g_spdk_iscsi.require_chap becomes true but
g_spdk_iscsi.mutual_chap becomes false.
When either "DiscoveryAuthMethod Mutual" or "DiscoveryAuthMethod Mutual CHAP"
is specified, both g_spdk_iscsi.require_chap and g_spdk_iscsi.mutual_chap
become true as expected. But any user cannot guess "Mutual CHAP".
On the other hand, CHAP feature for iSCSI target nodes works as
expected.
Fix this issue according to the implementation in iSCSI target nodes.
One difference between iSCSI target node and discovery service remains
that iSCSI target node doesn't allow "AuthMethod Mutual" but discovery
service allows "DiscoveryAuthMethod Mutual" to be compatible.
Change-Id: Ia3ce1640ffb1303ea77a05009bcabddaff080941
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423963
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Config file pathnames have been possible on the command line
for a very long time, and all of the SPDK testing infrastructure
uses it. The default pathnames were added a very long time ago,
and now can cause weird issues like conflicting with --wait-for-rpc
when an INI config file is not passed on the command line but is
pulled in by the default pathname instead.
So remove the default pathnames.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia914ff1c9321235f79f8cc9a054ed7f099340151
Reviewed-on: https://review.gerrithub.io/424606
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was added a long time back for tracking an rte_mbuf
whose buffer was a different rte_mbuf - all related to
a userspace TCP stack that is no longer in development.
The concept isn't useful now, so remove it to reduce
the complexity of the tracing code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I310e492eba7f55df242bb29d82fb19f6daee1f51
Reviewed-on: https://review.gerrithub.io/424565
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
To be consistent with nvmf, use underscore.
Change-Id: I5f2ae60518367ab439db9b893ab8ba975e82bed9
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/424179
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
One was an API issue, another was a dereference of a null pointer that
resulted from a possible call to a stubbed function in the unittest
common code, and the last was an erroneous use-after-free due to
scan-build apparently not understanding TAILQ_REMOVE.
Change-Id: I9111817e9e990ff6e388351c08f34c2e945df62d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/423959
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Without this fix, large writes would report underflow. Linux
initiator seems to ignore the underflow condition, but ESXi
initiator would properly detect it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icab28531c44f61a8e5529bcee989d0c2bf41d043
Reviewed-on: https://review.gerrithub.io/423906
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Adding CHAP authentication group configuration to JSON config dump.
This addition is done unconditionally because the path to the CHAP secret file
have to be specified explicitly now.
Change-Id: Ibd4085222a6767dae3a74023f1d6bc270ef4abac
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421469
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new RPC to get current authentication group configuration.
This patch is utilized in the next patch to support JSON config dump
for authentication group configuration.
Change-Id: I34be9e196f8e7a484bcd316da54f05d0f6ee0300
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous patches enabled users to configure CHAP secrets dynamically
by RPCs. Subsequent patches will enable users to load CHAP secrets
from JSON config file.
Loading CHAP secret file is done by default and this will conflict to
JSON config file.
Hence the path to CHAP secret file is required to specify in the config
file or JSON RPC set_iscsi_options explicitly after this patch.
Users who have used CHAP secret file are expected to specify it explicitly
and this will be no harm for them.
Besides, CHAP secret file is not oly for discovery sessions but also for
login to iSCSI targets. However there were wrong description to make user
misunderstand. Hence remove these wrong description in this patch too.
Change-Id: Ic4093cabc0c14b87e26baef4bba6b0d292e40c06
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add RPCs to add/delete a secret to/from an existing authentication group
dynamically.
Use mutex to ensure exclusive access to CHAP secrets.
Tries to use descriptive message in RPCs when error occurs.
Change-Id: I59650ae11a2fe675d03b90bbd4d2dc5b9c0160ed
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds new RPCs add/delete_iscsi_auth_group to add and
delete authentication group dynamically.
Mutex is added to ensure exclusive access to CHAP secrets.
Additionally provide descriptive message in RPC when error occurs.
Change-Id: Iaddfbdd5688ca7907d2c7d859835faa056deecd1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For secure iSCSI targets, dynamic reconfiguration of CHAP secrets is
must to have.
Currently CHAP secrets are loaded for every CHAP authentication
operation. The current implementation will not work correctly
when CHAP secrets in the file are changed dynamically.
If SPDK loads CHAP secrets from the file only at boot and they can be
configured by RPCs, user can change CHAP secrets safely during run time.
Even if there are any users who expect dynamic reconfiguration of
CHAP secrets based on the current implementation, if we provide
this better alternative based on RPCs, they will be able to continue to
satisfy their requirement.
This patch change the current implementation so that SPDK loads
CHAP secrets from the file once at boot and uses them in memory
hereafter.
Besides, use fixed size buffers to hold CHAP secrets.
Previously dynamically allocated buffers by strdup() had been used,
but it required many nomem checks and should be avoided.
Other iSCSI targets/initiators have used fixed size buffers and SPDK
follows others.
Set the size of buffers for both user names and secrets to 256 (the
last byte is for NULL termination). 256 is sufficiently large
compared with others.
CHANGELOG will be updated in the separate patch because new RPCs will
be added instead.
Change-Id: I499e792817c2ed01c3d970bbd3d34a6b1fccf65b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421463
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
According to https://tools.ietf.org/html/rfc3720, the
default value for the FirstBurstLength is 65536 bytes
while SPDK iSCSI target picks the smaller 8192 as the
default setting. This value is the communication for
the iSCSI initiator to send the unsolicited data and
instead of having a fixed setting here, expose it as a
user configurable parameter to fit the real use case,
especially for the data out iSCSI write.
Example of usage as following in the iSCSI.conf:
FirstBurstLength 8192
Change-Id: I71690c7c48aa0875f1f975c0ea935389de6d1e6d
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/421142
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove mutex to guard discovery_auth_group in
spdk_iscsi_get_authinfo() because update of discovery_auth_group
is atomic even no mutex.
Change-Id: Id9ddcb84c2fc3c820984e52dda7ca73839497e24
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/422765
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch series will refactor/improve CHAP authentication and consolidate
it into iscsi_subsystem.c.
To get better reviews, this patch just moves spdk_iscsi_chap_get_authinfo()
from iscsi.c to iscsi_subsystem.c.
Change-Id: I953f5c851bfe67dc02f6f82966132b4216e79228
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/422764
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
An new RPC set_iscsi_target_node_auth enables users to configure CHAP
authentication for the target node dynamically.
New setting is used for new iSCSI sessions. For existing iSCSI sessions,
new setting is not used until user logout and login again.
Try to use descriptive message in the RPC when error occurs.
Change-Id: I0bd40d92262d708c1f7de0effb208078bdf8cc41
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420974
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
An new RPC set_iscsi_discovery_auth enables users to configure
CHAP authentication for discovery sessions dynamically.
Try to use descriptive message in the RPC when error occurs.
Change-Id: I8883d5e054539cf6db091a5b79d0479e62119811
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420976
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Current parameter names of `set_iscsi_options` and `get_iscsi_global_params`
RPC method for CHAP in discovery session may not be clear and long
compared with CHAP in login to target nodes.
This patch changes parameter names of `set_iscsi_options` and
`get_iscsi_global_params` RPC method for CHAP in discovery session
from no_discovery_auth, req_discovery_auth, req_discovery_auth_mutual,
and discovery_auth_group to disable_chap, require_chap, mutual_chap,
and chap_group, respectively.
Old parameters are still usable because decoder of them are not removed.
Change-Id: If3102f1233d57ee3cadfb733a6fc1fca14a0e972
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423050
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Current variable names for CHAP in discovery session may not be
clear and long compared with CHAP in login to target nodes.
This patch changes variable names for CHAP in discovery session
from no_discovery_auth, req_discovery_auth, req_discovery_auth_mutual,
and discovery_auth_group to disable_chap, require_chap, mutual_chap,
and chap_group, respectively.
By this patch, the term "discovery" is removed but this will not
cause any confusion because the code of the use case of them is
clear and an new RPC set_iscsi_discovery_auth will be added in the
subsequent patches.
Change-Id: Ia57041b54b28a19d5d2d90ea6c6665937c25fefc
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423049
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the connection is already in exiting or exited
status, we should not set it again. And this
could prevent the coredump.
Change-Id: Ia506d13b12c3a6cb5619d65e4b3353b149a85947
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/421668
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reason: If the task is queued in scsi layer to handle, we
should free the task after calling the spdk_iscsi_task_cpl.
Otherwise, if only this task is executed (without subread tasks),
the task will be freed by the loop early, which will cause
the segment fault in spdk_iscsi_task_cpl function.
Change-Id: Ifc42399957b24d976af5fd12f6e33459a3ea86ba
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/421706
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Due to the network issue, spdk_iscsi_conn_free_pdu in
spdk_iscsi_conn_flush_pdus_internal will not be executed.
So consider the pdu free, we should call spdk_iscsi_conn_free_pdu
in spdk_iscsi_conn_free_tasks.
Actually, for the task which in queued_datain_task, we have
the following case:
1 The task is not sent to the scsi layer: it means that
the task is not freed, so we should call spdk_iscsi_task_put
here.
2 The task is sent to the scsi layer, but no subtasks
are sent to the scsi layer: It means that the call
back function (spdk_iscsi_task_cpl) will be called,
but since it will have the subtask, so spdk_iscsi_task_put
will not be called, thus, we should call spdk_iscsi_task_put
here.
3 The task is sent to the scsi layer, and some subtasks
are also sent to the scsi layer: It also mean that the
spdk_iscsi_task_put will not be called in spdk_iscsi_task_cpl,
and not all the subtasks will be finished, so the father task
will not be freed, so we should still call spdk_iscsi_task_put
here.
4 The task is sent to the scsi layer, and all the subtasks
are also sent to the scsi layer,
thus this task is not in the queued_data_in_task.
So according to 1-4, we should call spdk_iscsi_task_put here,
and also decrease the data_in_cnt;
Change-Id: Icb13df1ae07f6eea0247d45f4a0397edc4aa2500
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/420875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Setting of one-way CHAP auth is applied to mutual CHAP auth unexpectedly
for discovery session.
Change-Id: Ice931b5b70985ae433740eaee63740c9acff6ef2
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420975
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In python script:
- timeout should be nop_timeout
- min_connections_per_core was min_connections_per_session by mistake.
- max_queue_depth was not included.
- call_cmd was missing.
- A space should be added after semicolon ":"
In SPDK library:
- type of options was not int32_t but int. Hence decode failed.
- type of options in dump were not correct.
Change-Id: Iaa79236c03d368cdf286a72c2386509ffa81530f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/419553
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When hot removal of a LUN is started, callback is called for each
iSCSI connection which accesses the LUN. Callback checks all transfer
tasks complete and then close the LUN.
If the connection clears all transfer tasks before getting all responses
to them from the initiator, the initiator continues to retry data write.
Hence the connection have to wait until all transfer tasks complete.
Change-Id: Iad9063673cfedbd78758890d55a4254512e4fca4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When multiple LUNs are attached and spdk_clear_all_transfer_tasks() is called with
a LUN, all tasks whose target is the LUN are removed and there will be room to start
queued tasks for other LUNs. However currently no migration is done.
Add UT code to verify the fix too.
Change-Id: I082d370ab86a46e5b4a74a16293a572fae663add
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/418765
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A few open-coded sequences equivalent to SPDK_CONTAINEROF() were
scattered around; replace them with the macro from spdk/util.h.
Change-Id: I95c6e6838902f411420573399ced7c58c2e4ef84
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418126
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is not any plan to support bidirectional command. To understand implementation
of residual count a little easier, remove residual count variables about unsupported
bidirectional command.
Change-Id: I1154e2e2708cc47c5bd4630ce9a91980f433fef8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417216
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This bug was caused by the following two changes:
iscsi: Remove duplication of the variable for write completion to bdev
https://review.gerrithub.io/#/c/393582/
iscsi: restore data_transferred accumulation for read
https://review.gerrithub.io/#/c/393713/
For write, bytes_completed is always equal to data_transferred. However,
for read, bytes_completed is based on expected data transfer length and
data_transferred is actual read size. Hence bytes_completed cannot be
used to calculate residual counts.
One of the reason why this bug cannot be found was that there was not any
test case when task->scsi.data_transferred is 0 and task->scsi.length is
not 0. Hence UT code is also added.
Same bug will occur for read sense data. Hence UT code for read sense data
is added in the next patch.
Change-Id: Ib1a283b769e5af0c2d05acb69f90948c5d658087
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417960
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
if the scsi status of the task is not GOOD, iscsi_transfer_in() returns
immediately. Hence checking it again is not necesasry.
Change-Id: I55cb025e97c8dcd51692303d0d21ce48b1185631
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/416315
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is to improve readability and clear logical structure.
Change-Id: Ib67e03afb5a40df047f3829baad56656d90e5a54
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/414927
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some code which doesn't follow the coding rule are fixed.
Unnecessary blank lines are also removed.
Besides, unfulfilled 80-char line length limit degraded readability and
adjust some of them.
Change-Id: I1d12fc81cc867af38380bd038869ffe587c78592
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/414926
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6babd4cf990bf19b510db88bdfb0ca81e29d9252
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414700
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will simplify remove operation a little.
Besides a few unnecessary blank lines are deleted.
Change-Id: Ifd312e5a94ba0668d884dd5baf1ef1f2ebd4417c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/414562
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Try to make the logic of the function a little clearer.
Change-Id: Ic78bed73feef94d94487f0a4240019789be8d2bc
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/414353
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It will also help the debug for the memory leak of
iSCSI tasks.
Change-Id: I524962ae1e3278aaf6aca12cc85a5e0f616c3001
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/414623
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is not needed since now we have group iSCSI
poller
Change-Id: I99127a62fc84cee5088b16c908edd78876d0fcfb
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/414620
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is a pair to the following
- subsystem/iscsi: Add set_iscsi_options RPC to set global params
Now options can be loaded from JSON config file.
Change-Id: Ifb68cddbb045d51fbaf8161ad59ede9d399e70cb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/410874
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
An new RPC set_iscsi_options allocates and set options dynamically.
Initialization of iSCSI subsystem skips initialization of options
if it is already allocated.
To use and test this RPC easily, add python script too.
Change-Id: I71e252da6495a194ae9a1a9e3aaae4feb543487a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403624
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reason: If we trigger the spdk_iscsi_conn_migration,
we may face the issue that the io channel of lun
is NULL(which means not allocated). So I think
that if we trigger the migration, we need to
stop the executing the further pdu of this conn
by the current polling group.
Also since the connection is triggered migration,
we should stop execution on the current core, and
let this connection be handled by next round.
Change-Id: I0ab89d79c976f3233890ae25cb7eac98de5e30ac
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/409984
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The initiator may close the connection unexpectly
due to many differnent reasons, which should not
print error log of our SPDK iSCSI target.
Change-Id: I652be75c0762547f27212503e5b52bfc898ecc8f
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/412593
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Missed to add object_begin to dump for portal group.
key of lun in luns is different between dump and load.
Change-Id: I16b95596478e0e4430c7186aa077bd107e375a93
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/410863
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Support JSON config/info dump for portal group. These are added to
portal_grp.c. Text config dump is moved to portal_grp.c.
Add accesses to g_spdk_iscsi.pg_head are consolidated into
portal_grp.c to extract pg_head from g_spdk_iscsi.
Change-Id: I8c551b067c68a785eb0c7d83d695bde5f7219c2b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407850
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Support JSON config/info dump for initiator group. These are added
to init_grp.c. Text config dump is moved to init_grp.c too.
Add accesses to g_spdk_iscsi.ig_head are consolidated into
init_grp.c to extract ig_head from g_spdk_iscsi.
Change-Id: I88131d248ed13e42e4da56aed8ae0edc01a65715
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add base of JSON config fump for iSCSI subsystem in this patch.
JSON config dump for target node is already merged and it is added
to the JSON config dump for iSCSI subsystem first.
Besides, spdk_json_write_named_* APIs are applied to JSON config/info
dump for target node to reduce and clean the code in this patch.
Config dump for global parameters will be handled in different patches.
Change-Id: Iee786fbda3683c75a47c55b16d6db0235ac60896
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/406493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Support JSON config/info dump for target node. These are added
to tgt_node.c Text config dump is moved to tgt_node.c too.
All accesses to g_spdk_iscsi.target_head are consolidated into
tgt_node.c to extract target_head from g_spdk_iscsi.
Change-Id: Ibdf57c6ec9457d762c5640483b5810c9a74604ef
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407848
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In JSON-RPC, string is allocated unconditionally in decode operation.
Hence if string is allocated in opts_init(), it will be overwritten without
any notice.
This patch is to keep compatibility to the config file and adjust to the
upcoming JSON-RPC for options initialization.
Change-Id: I6c16f2af7f34d052aabceb5bc4ebe2fc9d82714a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407846
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
In the current implementation, even if global parameters in the config file
are wrong, they are ignored and default values are applied.
Now JSON config file is under development and is a good chance to break with
past and change to reject wrong parameters.
This patch add verify() function into spdk_iscsi_initialize_iscsi_globals().
Besides, this patch fixes the return code of iscsi_initialize_global_params().
Change-Id: I708a1537746fe6ce22c36d1442f7eaf2a201830e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/406021
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add state_mask to each RPC method and state to RPC server, respectively.
State mask of RPC method is set at registration. State of RPC server
is changed according to the state of the SPDK.
When any RPC method is recieved, if the bit of the RPC server is on in
the state mask of the RPC method, it is allowed. Otherwise, it is
rejected.
When any RPC is rejected by state_mask control, the new error code
is returned to describe the error clearly.
Change-Id: I84e52b8725a286e9329d61c56f498aa2c8664ec1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407397
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Store the file descriptor for the shm_open()'d connections array so we
can clean it up at shutdown.
Change-Id: Ia2727f837431cb1de2c077718412e70364135a5f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408533
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It doesn't make sense to assert(pg != NULL) after already dereferencing
the pg pointer.
Additionally, pg is pointing into the g_spdk_iscsi.poll_group array, so
it makes more sense to check that the poll_group array is non-NULL.
Change-Id: I167fed2bd73dc6a1894ff5b13d5bf3e5aa835f47
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408234
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
strncpy is going to be added to the list of banned functions because
it does not guarantee strings are null terminated.
Change-Id: I5fe2f9e717bb65caf6fa26dca075aa974c7f7173
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407021
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
With the preferred per core operation for the lockless
consideration, having some per core cache instead of
the shared gloal cache will help the performance.
Change-Id: Ib3cfaac5bad7062b15643d5b151d4c7c6051ddf1
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/404533
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some places use NULL to check for mmap failure but mmap return
MAP_FAILED in this case.
Change-Id: I4796fa52421da53c94223a9e8cc26ac04968f1d8
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405648
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The static variable g_connections_per_lcore can be configured by
.INI config file. However it had not been added in the iSCSI options
because it was not iSCSI global parameter.
This patch is necessary for JSON config file to configure it.
Change-Id: I12aa1d94dd467969a6853b9fb3f8a627d0d70766
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403623
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Re-word confusing comment in spdk_iscsi_read_pdu() and
simplify a return path in spdk_iscsi_handle_status_snack().
Change-Id: I15bd8b2f45d0e45cf4a4a34533ecb8af0a154531
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/404034
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The sock abstraction wraps these functions now, so the iSCSI layer
doesn't need to include them directly.
Change-Id: I900ed96a9cfb5d12c7fd190bc590d00846a47034
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403879
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_execute() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I8f7e46495db2c517970e7e5de6ace1b13159b42b
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403883
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_send_r2t() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: Id18c39a7ea0ea748f1ecb842aee9a08594fb2a48
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403878
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_op_nopout() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I6a0563c14a1bddf219dd12de67f83b18d6fd82f4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403874
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_op_logout() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I31f854741906023c734151e3b00b939cdafb2ec4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403864
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_op_text() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I21036116936c50c5674e0d11bbb4a30938bf5336
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403860
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_op_login() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I95da4ff967667f6439330d7959c6937c55522e9a
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403857
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_reject() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: Id29bed20cedbb7c42b75fcb0ce6070f561d4a3d0
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403856
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepares spdk_iscsi_read_pdu() to handle the case where
spdk_get_pdu() will return NULL in a future patch instead
of abort()'ing.
Change-Id: I9ccfbf41821fb90a203fd8ad026f42fac10e9dbc
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403745
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
ImmediateData in negotation parameters can be controlled by the config
file and currently "Yes" or "No" are valid values of it in the config
file. "Yes" or "No" means almost bool. Additionally, ImmediateData is
defined as boolean value in the iSCSI specification as follows.
However ImmediateData is an uint32_t variable and 0 or 1 are used in
SPDK now.
In the upcoming JSON config file, boolean value should be set to
ImmediateData.
Hence change all variables and constants related with ImmediateData
to boolean in this patch.
InitialR2T, DataPDUInOrder, and DataSequenceInOrder are not controllable
by the config file but these are defined as boolean value in the
iSCSI specification.
Hence change them to bool too.
Besides, AllowDuplicateIsid is used almost as boolean value. Hence
change it to bool too.
InitialR2T=<boolean-value>
ImmediateData=<boolean-value>
DataPDUInOrder=<boolean-value>
DataSequenceInOrder=<boolean-value>
Change-Id: I9f98b219687b3600194563b1d6b85551f4586144
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403237
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For the CHAP setting of iSCSI targets, JSON-RPC handles the
value of parameters directly and dump of iSCSI targets can be
used to construct directly.
For the CHAP setting of iSCSI discovery session, the same manner
will be applied.
Change-Id: I8731af4273cc89ee5c4ea2f97955e56e3bff202d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/401076
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Trace the initiator and target name for debugging purpose.
Change-Id: I89230484072a7f12a58b4234abd1026a228f302a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/403690
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be used to track time used in pollers - each poller can now
indicate if it found any work to do or not.
For cases where it was obvious and the infrastructure was already in
place, existing pollers have been modified to return 0 or a positive
value to indicate whether work was done. Other pollers have been
modified to return -1 by default, indicating that the poller isn't
indicating anything about whether work was performed. This will allow
us to find un-annotated pollers easily in the future and fix them
incrementally.
Change-Id: Ifebfa56604a38434fac5c76ba7263267574ff199
Signed-off-by: Roman Sudarikov <roman.sudarikov@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If we are not in ffp phase, we do not need to update last_nopin
Change-Id: I289beec8437d7117b6261483c333bf5db5fbd11f
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/403166
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In the upcoming JSON config file, CHAP parameters for discovery will
be specified simply by the value of them.
This is as same as JSON-RPC for target node but different from .INI
config file.
If CHAP parameters are specified by the value of them, the combination
of them must be checked before applied to iSCSI globals.
Change-Id: Idf663796f97581366da945abb8dc351f3975ceae
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403235
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently CHAP parameters for discovery are handled as bool but
they are defined as int. Hence change their type from int to bool
as done for target node previously.
Change-Id: I1e815946d4bdececcdd7cc873a725afbbcb98e50
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403234
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Portal, portal group, initiator group, and target node don't use fixed size
array anymore. To use the same naming rule in iSCSI subsystem and in SPDK
is helpful to understand and maintain. Current naming rule is not bad but
to use unified and compact name is prioritized at this time.
This patch changes function names as follows:
- spdk_iscsi_init_tgt_nodes() -> spdk_iscsi_parse_tgt_nodes()
- spdk_cf_add_iscsi_tgt_node() -> spdk_iscsi_parse_tgt_node()
- spdk_iscsi_portal_grp_array_create() -> spdk_iscsi_parse_portal_grps()
- spdk_iscsi_portal_grp_create_from_configfile() -> spdk_iscsi_parse_portal_grp()
- spdk_iscsi_portal_create_from_configline() -> spdk_iscsi_parse_portal()
- spdk_iscsi_portal_grp_array_destroy() -> spdk_iscsi_portal_grps_destroy()
- spdk_iscsi_init_grp_array_create() -> spdk_iscsi_parse_init_grps()
- spdk_iscsi_init_grp_create_from_configfile() -> spdk_iscsi_parse_init_grp()
- spdk_iscsi_init_grp_array_destroy() -> spdk_iscsi_init_grps_destroy()
For example "parse" is already used to explain the operation in portal_grp.c.
Hence using "parse" is familiar and not strange in iSCSI.
Change-Id: Ieff952069d39bd96b7afa1586bfff927968accc2
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403149
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some variables of struct spdk_iscsi_globals are initialized by using
.INI config file but others are initialized without using .INI config
file.
This patch aggregates all initialization operations into a function
spdk_iscsi_initialize_iscsi_globals().
Next patch move the code to read .INI config file from
spdk_iscsi_initialize_iscsi_globals() to spdk_iscsi_parse_iscsi_globals()
to make implementation cleaner.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: I0bda0de1d8bf1ba5e4b4e5157949fd300ec9ff9d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403148
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Upcoming JSON config file will support iSCSI global params initialization.
This patch is an effort for JSON config file to reuse the current code as
much as possible.
SPDK's other libraries use options structure effectively, and hence
iSCSI library also utilizes it.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: I9936a4cac4048adaa5d69233f156887376d7cde1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403147
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch extracts iSCSI subsystem initialization by .INI config file
into a function spdk_iscsi_parse_iscsi_globals().
Naming rule was adopted from NVMf-tgt.
By these two patches,
iSCSI subsystem init is done in spdk_iscsi_parse_iscsi_globals().
iscsi subsystem config is done in spdk_iscsi_parse_iscsi_configuration().
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: Ibafb0b62cbb0aa23dd6dd6007dad0345293e65b8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403146
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI poll_group initialization must be completed before starting JSON-RPC.
This doesn't have any dependency to the other iSCSI subsystem
initialization and completes asynchronously. Hence thisis good to be placed
at the end of iSCSI subsystem initialization.
Besides, object creation of iSCSI configurable components started after
poll_group initialization by .INI config file is aggregated into a function
spdk_iscsi_parse_iscsi_configuration().
Naming rule was adopted from NVMf-tgt.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: I44421803268361f53840a7e47f07ce95c13d1139
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403145
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next patch will move the location and change the callback of poll
group initialization. Besides it is probable for JSON config file to
change the callback of poll group initialization.
Passing callback as argument increases visibility and flexibility of
code.
Change-Id: Ie4bfd2c60a112bb7c697110ef0efc30a2c098dc8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403144
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Pool of iSCSI connections and related variables are initialized in
initialize_iscsi_conns().
Currently initialize_iscsi_conns() is located after configuration of
target nodes by .INI config file.
Configuration of target nodes can be done by JSON-RPC but connection
initialization must be completed before starting JSON-RPC.
iSCSI connections don't belong to iSCSI global params directly and
hence move connection initialization right after initialization of
iSCSI global params.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: I183365b84aa205790b27adf7cc1f632b932195aa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403143
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI subsystem have a pool for PDU, session, and task, respectively.
They belong to the struct spdk_iscsi_globals and are initialized by
using the parameters of the struct spdk_iscsi_globals.
Hence their initialization should be located just behind the setup of
parameters of the struct spdk_iscsi_globals.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: Ie39f63ee24c547dcd31a1a06d72d915e8c272864
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403142
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Object creation of portal, portal group, and initiator group can be
done by JSON-RPC.
This patch moves object creation of portal, portal group, and initiator
group right before object creation of target node.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: If78beabb478923e7c920c09b16e42d6f8aa55775
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403141
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are four configurable components, portal, portal group, target node,
and initiator group in iSCSI.
They have a TAILQ to manage their objects, respectively.
Currently each TAILQ initialization is done together with its object
creation by .INI config file.
This patch separates TAILQ initialization from object creation for four
configurable components in iSCSI.
The purpose of the patch series is
- to separate iSCSI subsystem initialization and iSCSI subsystem
configuration, and
- to develop a new JSON-RPC by reusing the separated iSCSI subsystem
initialization.
Change-Id: Ia4ac3f06f15acef671e785904f4c687e5d189fbe
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403140
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie7a940efde885dbf0bb7c085fd17c3991dfa3341
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/403165
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The variable ntargets in the struct spdk_iscsi_globals was needed
previously because iSCSI target node was managed by a fixed size
array.
Now iSCSI target node is managed by a linked list and ntargets
doesn't take any meaningful role now.
Change-Id: I1805d7a6a6ce40efa4d18f198fbb9104bee43b26
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/402976
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Even if the value specified by user through the config file is correct,
the default value is always set to DefaultTime2Retain.
Change-Id: Ifdf44e743419813b728a1423c441df59cc90c0a1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/402635
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also remove the related login and full feature
function
Change-Id: Ia2d0a6617910134c889d1322b53830fe26b9e956
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402486
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch will also re-export spdk_iscsi_conn_destruct
Change-Id: I7d6cbba33294c84398a919d888c8b375e901e09e
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402485
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI's global mutex is used in spdk_iscsi_portal_grp_create()
before it is initialized by pthread_mutex_init().
A mutex filled with zero bytes has been accepted by now but
this should be fixed.
Change-Id: I2e197bec8da2f781c8c4f6e2a2caf9924b0a4369
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/402497
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Put it in the iscsi.c
Change-Id: Ifb2843fb7c78f9ca948eac60704547b8b0635bf0
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402484
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If this polling group is not initialized, we do not
need to destroy the polling group.
Change-Id: I5a94412d7f42b05d4a457c8652e2f465190fbe6e
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401362
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The better location is to put this function in
the end of process_read_task_completion which can match
the the same function call in spdk_iscsi_op_scsi_read.
Change-Id: I7dbfb23e2c469e0be22e148299643a99b93c8018
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401985
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since we have two pollers for each iSCSI polling group,
so it could be possible that the nop_poller to set
iSCSI connection in existed or existing state.
So add a check here, which means the incoming data
is too late.
Change-Id: I94e5090b005c35c9eb5d7eedbd7acdae67327f94
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402039
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: To make the logic clear.
Change-Id: I6176f359a23816b316e92b63ee2e5d5175ae7e7b
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401772
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is used to implement the sock fd event group
polling mechanism if there are incoming data from network
(read event in SPDK iSCSI target side) , thus we can awake
many connections one time, and it can reduce the system call
overhead.
Change-Id: I76c26a89ef9365d7e1ccec616985e7435253896b
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399796
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The iSCSI connection does not have the poller anymore, so
change the name
Change-Id: I534f72998c6bcc73ad9caf5e8f700751acd95c99
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/401372
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic2bae1c750d2c9b35bded8ed96c3b84832690ce2
Reviewed-on: https://review.gerrithub.io/401479
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
During converting type of CHAP params of target from int to bool
for JSON, changed names of them to be consistent with others.
In this patch, adjust variable name of struct to of JSON.
Change-Id: I1ccbfa11d57479dc55680835eb80e111bd24d9a3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400928
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a TODO from long ago. Complete this while adjusting dump()
and construct() format of target.
Besides names of variables and parameters about CHAP are not unified
between JSON-RPC and SPDK internal. JSON-RPC's wording looks better
and adjust SPDK internal to JSON-RPC.
Change-Id: I89bcd1ce13a11f7d63a62d51ef094dd302186d37
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a TODO from long ago. Complete this while adjusting dump()
and construct() format of target.
Change-Id: I44348ec404cae8882086a1a71a65914c9bafccc3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds a iSCSI poll group for each core,
thus we can poll a group of connections instead of one
by one on each core.
Change-Id: I9cd82c8c0f7f6e7b3ee34034339638199bfca5da
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399565
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
JSON format of bdev_name_id_pair is different between
construct_target_node() and get_target_nodes().
construct_target_nodes() uses the following format:
"lun_ids": [
1
],
"bdev_names": [
"Malloc0"
]
get_target_nodes() uses the following format:
"luns": [
{
"lun_id": 0,
"bdev_name": "lvs_1/lbd_1"
},
]
The second format is better than the first format. Hence unify to
the second format.
Change-Id: If097e41ada0f2fe3754691cee0a0774db97c4ebb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/399993
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the following JSON-RPC:
1) get_target_nodes
2) construct_target_node
3) add_pg_ig_maps
4) delete_pg_ig_maps
JSON format is not unified yet.
1) uses the following:
"pg_ig_maps": [
{
"ig_tag": 1,
"pg_tag": 1
}
2), 3), and 4) use the following:
"ig_tags": [
1
],
"pg_tags": [
1
],
the first format is better than the second format. Hence unify to
the first format.
Change-Id: I6cc19115001b9c9ba9db5c87db1def7c0b3bd80c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400203
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In early days of SPDK, there was an experimental userspace
TCP stack called libuns. The SPDK iSCSI target supported
using either the default POSIX/kernel TCP stack or this
libuns TCP stack.
libuns is no longer in use, but work has started on
supporting the FD.io VPP TCP userspace stack. Abstractions
are being put in place to allow *both* the POSIX and VPP
stacks simultaneously.
So remove the concept of a "default" net_framework that is
defined with weak symbols that can be overridden by another
object file. While here, also remove the "clear_socket_association"
concept which was specific to libuns.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a0385ca5ae113e34a637f835d8d69f8d510433e
Reviewed-on: https://review.gerrithub.io/400328
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is a preparation to match response of dump with request
of construct (load).
Change-Id: I08d0e860ecd842fabf2bbea0b888a60ffd51b055
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/399992
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
