When the QP is set to INACTIVE state, we always unmap the QP's
address to NULL, we can just check the address is valid or
not before posting completion response, so there is no need
to do the special process for the aborted AERs.
Change-Id: I1dc9893e04810e9a15e1eeb4d9405b775eab38d7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8803
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
We should use the diff bits to decide the action to CC.
Change-Id: I08cf6f65711f86328825dcd9e204ed79766c59fe
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Similar with Create IO SQ command, we should also defer the completion
of Delete IO CQ command until the IO QP is disconnected finally. However,
since the NVMf library will disconnect/free the queue pair finally, we
can't use the queue pair data structure to save the context, so define
a delete_cq context for Delete IO CQ command.
Change-Id: I005ad86c2af59540323205e9e928a2d573d5c448
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8796
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The NVMf library doesn't process Create IO SQ command, so for
this command we will use a fabric connection command instead,
however, the fabric connect command is called asynchronously,
so we need to defer the completion for Create IO SQ command after
fabric connect command is completed.
Fix issue #2043.
Change-Id: Id8c71ca69fb750a3ffb0fb26b54fa8b6d87e8ff4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8786
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can set endpoint's controller pointer to NULL before free_ctrlr, as
controller is a session in vfio-user, while endpoint is related with
Unix Domain socket.
Change-Id: If6d26c7522804029f8c2425bc478df9e2d53d32a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7966
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
The VM may already delete all queue pairs and just leave the
socket when killing VM, so we can check number of connected
queue pairs here, if no connected queue pairs, free the
controller immediately.
It's an optimization so that we don't need to loop all
queue pairs below.
Change-Id: Ia1be868ce2c74ce6953b1f44a81b51d605e642f0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
The specification says:
"A host may replace its reservation key without regard to its registration
status or current reservation key value by setting the Ignore Existing Key
(IEKEY) bit to '1' in the Reservation Register command."
So for this case we treat it as a new registrant, also add UT to cover
the added cases.
Change-Id: I5990f15da36706063a35565d110ed4c6eb30a3f3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since we are using NVMf fabric library to emulate a PCIe based SSD via
vfio-user target, so there maybe some commands that are related with
PCIe SSD only, such as set/get features with interrupt coalescing
and Interrupt Mask Set/Interrupt Mask Clear registers. Even the
NVMf library doesn't support that, it is not a fatal error to Host
NVMe driver, so here we use the info log instead of error log for
this case so that to avoid noise logs.
Fix#2036.
Change-Id: I8283bcde5779080835d6ab827dbd852b3816176f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
The NVMf library will not implement interrupt coalescing and ignore them, but we can
report this via get_features.
Some OS may check the result from get_features so that it will not send set_features
for interrupt coalescing.
Change-Id: I7466bcbc0ea5b3b067751cdf1979b2e0681c0043
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8765
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no need to map the PRP/SGL list RW since this memory is never written
to. In fact, SeaBIOS might submit a request where the PRP list resides on
read-only memory, so attempting to map it RW can break things.
Change-Id: I7e4e90b1fa7e33e81b8d5cd8dcb9568c038938ec
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Nvmf/vfio-user uses this API to map NVMe command sent from
VM from Guest Physical Address to Host Virtual Address, so
now we moved this API from the nvme library to nvmf/vfio-user
as an internal API.
UT code will be added back in coming patch.
Change-Id: I54817fc9811ccd9ddd97b3aa6762a2fce4bbdda6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Bit 1 in the CMIC of the Identify Controller Data Structure specifies
if the NVM subsystem may have multiple controllers or not.
However, multi_host indicated a particular use case such that the NVM
subsystem is used by multiple hosts.
multi_ctrlr will be more appropriate.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0246096a5cc44721aeff3ff6f96473a2abe11964
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8719
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If NGUID is not specified with nvmf_subsystem_add_ns json-rpc request
then it is possible to expose the same NGUID as bdev nvme module
attached.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ie0ed7189e55a5abd6bc0904fc356d26f62b50549
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The vfio-user target emulated NVMe device is treated as
PCIe NVMe SSD in the Guest VM, so when doing controller
reset or shutdown, we should abort the AERs which in the
NVMf library.
Users may switch kernel NVMe driver to SPDK NVMe driver
in the VM, without this fix, we will got "AERL exceeded"
response very frequently, because the AERs submitted by
previous driver will never be aborted in runtime.
Change-Id: I0222ed509629ccb0e98217414dd9043857105686
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8558
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When users remove kernel NVMe driver in the VM, after 120 seconds,
SPDK NVMf target will disconnect ADMIN queue pair due to association
timer timeout, and for vfio-user transport, the ADMIN queue pair
connection is associated with the socket connection, so when probing
the NVMe controller again, because there is no active ADMIN connection
for fabric register R/W commands, it will cause segment fault.
Here we set the association timeout value to 0 for vfio-user transport,
so that the ADMIN connection will not be disconnected when shutdown the
controller, the ADMIN queue pair will be disconnected when the socket
connection breaks.
Change-Id: I3613169229bae384405889653e50f581d30d7c07
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8557
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMf library will set cdw0 based on specific command,
so we use it directly in vfio-user, otherwise, some NVMe
commands such as AER can't work.
Fix issue #2016.
Change-Id: Ie1a80a92c0856b61822ee51ce5d8faaaf1d463de
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8556
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Also fix one incorrect print log.
Change-Id: I3254baf4bbff4acfc0ef43f628d025931e8589ea
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
These macros are only valid for Fabric transports.
Change-Id: Ia456eebdcdab28e81226c1b3a7211fcb41b5e481
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8554
Community-CI: Mellanox Build Bot
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is better to not fail connect commands when a subsystem
is not ready. The host will not be expecting that and will
typically treat it as a catastrophic failure (i.e. it won't
retry the connect).
So instead when this situation occurs, start a poller for
the connect request. We will continue to retry processing
it until the subsystem is ready to handle it.
Fixes issue #1985.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8835df8f0edf1e889fdd7e754e261c2a880cbb6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8571
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is possible for a controller to get added to the
subsystem before its admin_qpair has been assigned.
We need to account for that when traversing the subsystem's
ctrlr list when determining ns and ana_changes that need
to be reported for the ctrlr.
Found while doing stress testing with connects and
subsystem ns add/remove.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie54dc6ac202faeaeace054e6599f2dea2f30211e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8570
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Pollers are supposed to return SPDK_POLLER_{BUSY,IDLE}.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I92bd184aaba9e3efb730b68a6024ebc9757ffd8b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8559
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The function comment was referring to a non-existent caller; instead, expand
with a little more detail on the path taken for new QPs.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I42478194f3cfc18a6ff6c434964630ac42866f1d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When the property is 8 bytes but the host only requested
4, we need to mask and only return the bytes requested
by the host. Wait to do the DEBUGLOG until after
that has happened.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8f476a47e9fd07bf652fd64f3b1c17d650374167
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8506
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When a qpair is destroyed and the qpair is the last,
_nvmf_ctrlr_free_from_qpair() (in lib/nvmf/nvmf.c) sends two messages,
one is for _nvmf_ctrlr_destruct() and another is for
_nvmf_transport_qpair_fini().
We do not know which of two completes earlier.
_nvmf_ctrlr_destruct() frees the qpair->ctrlr in the end.
On the other hand, _nvmf_ctrlr_free_from_qpair() calls
spdk_nvmf_poll_group_remove() in the end, and spdk_nvmf_poll_group_remove()
accesses the qpair->ctrlr to free queued requests to the qpair.
Before one recent change, spdk_nvmf_poll_group_remove() had been called
before _nvmf_ctrlr_free_from_qpair() was called.
Hence extrace the operation to free queued requests from
spdk_nvmf_poll_group_remove() and inline it into _nvmf_qpair_destroy().
Fixes one showstopper error to investigate the issue reported in #1819.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I29c43ff7b289fc77a5de9c33e0266301c412e208
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Now that the trace library can handle multiple arguments, there's no
point in passing 0 for tracepoints that don't have any arguments. This
patch removes all such instances. It allows us to to verify that
`spdk_trace_record()` was issued with the exact number of arguments as
specified in the definition of the tracepoint.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Idbdb6f5111bd6175e145a12c1f0c095b62d744a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8125
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If we're not a DEBUG build, vfu_setup_log() was effectively forcing a
libvfio-user logging level of LOG_ERR. Instead, let the log handler decide what
to report, so we can respect the SPDK levels.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ib3ad62589f495a377885f7deabaf02b428e83d30
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8452
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Commit b7cc4dd added support multiple AERs, but didn't
remove the code that hardcodes aerl=0 for non-discovery
controllers. So even though the target now supports
multiple AERs, we never indicate that for non-discovery
controllers.
The spec also recommends that implementations support
a minimum of 4 AERs - so the current behavior is not
recommended.
It seems that at least on Windows (when testing with
vfio-user transport) we see the limit get exceeded
which results in ERRLOGs. Let's keep the ERRLOG there
for now, assuming that once we report we support 4
AERs that Windows won't try to send more than that.
Fixes issue #2000.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6a07a6f37aaa6e531ae2cf1e1c46da036b00785b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8488
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We cannot control what the host may send to the target.
For example, we have empirical evidence that Windows
will send vendor-specific IDs for features and log pages
(when testing with the vfio-user target transport).
So let's change the ERRLOGs in these cases to DEBUGLOGs.
Fixes issues #2004, #2007, #2008.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8d5b92fc5e33d698af246f2f1c34f7cf51e6488a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
1. Update with latest vfio-user specification changes.
2. The new libvfio-user will not expose dma_sg_t data structure
any more, SPDK should use pointer and allocate memory for it.
Change-Id: I619b0c0828cbe3b050c628bff4c4ce7ee840510f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8377
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Community-CI: Mellanox Build Bot
When creating queue pairs, the original code uses a stack
queue variable and copy it to queue pair in insert_queue
function, the coming changes in libvfio-user doesn't expose
dma_sg_t data structure any more, we need to change it to
a pointer and allocate memory for it, so here we eliminate
insert_queue function as a preparation.
Change-Id: Iee94029d24bc8882ec169665e229e6cbc11564c0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8376
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
in-capsule data over 4KiB when using the Linux initiator.
This is fixed in the latest kernel. See
https://lists.infradead.org/pipermail/linux-nvme/2021-May/025641.htmlFixes#1823
Change-Id: Ie383ea774ee31ef8fe255119095b21603483c33f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8424
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvmf_ctrlr_get_log_page used req->data to store the log page result.
While the req->data only contains the first iov, if req->iovcnt is
larger than 1, the req->data may not hold the complete log page; and
even worse, the log page result may be written to invalid address and
cause memory corruption.
Change-Id: Ie6415a6bd2327419fe4b32f21ac814fd827c9e95
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7970
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In nvmf_vfio_user_listen(), fd should be closed before
set it to endpoint->fd, otherwise, the fd leakage probem
occurs.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: I3fabc65d2764926e5873475962e4362e46eb37e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8309
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
POSIX defines %z for printing size_t values in a portable way.
Replace a reference to %ld to remove the assumption about
the type of size_t.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I2186aa5e7072f565ea75de935e22c2c23acf1a1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8341
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Because we use spdk_dma_malloc, then it does not init
the the contents in the memory.
Fixes#1996
Change-Id: Ieef411f6ae5114de9f732df6096e0bb123efb7e0
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8374
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
In spdk_nvmf_subsystem_add_ns_ext(), ns->ptpl_file is set to strdup(),
which may return NULL. We should deal with it.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: If95102fe9d6d789b8ba9e846c4d7f4e22e48a93c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8305
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The arguments of a tracepoint are formatted when they're printed now, so
there's no need to append ":" or pad it with spaces.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I74f5568f1982dacc079e3b80bd19a9cd740b48ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7955
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Both values should provide similar information, while the qpair can also
be matched to the traces from lib/nvmf allowing the user to track the
qpairs across these modules.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iba9abdd3f41b93100c0403b1c90fc4549d39189e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7159
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The traces are tracking the lifecycle of a poll group: creating it,
adding and disconnecting qpairs, and finally destroying the group.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I075b7f24d14b8fbb42bb18ddd70a668a8bace118
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7158
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also add scripts/bpf/nvmf.bt to enable and log these
probes.
This patch also adds a script that can generate
a bpftrace script snippet with string maps for
needed enumerations (currently nvmf_tgt_state and
spdk_nvmf_subsystem_state). This allows us to
dynamically generate this from the source code, and
can be extended for other enums we may want to
add in the future.
Thanks to Michal Berger for converting my original
gen_enums.py script into gen_enums.sh!
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iff34a6218aef40055ac14932eea5fc00e1c8bcf5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7194
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The original function will disconnect queue pairs first and then free
controller memory finally, so rename it to vfio_user_destroy_ctrlr().
Change-Id: Idc235e4186bd4164be712fc9d4cda4991efc6248
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7624
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
The coming destroy_ctrlr() function will disconnect
queue pairs and free controller at last, so here
rename the original destroy_ctrlr() to free_ctrlr().
Change-Id: I527b2742142d60b0383be5a12391c77dd50d47a7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7623
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
The original destroy_qp() only release the queue pair
related memory, and free_qp() will be called inside
destroy_ctrlr() function, so also remove one duplicated
line here.
Change-Id: I2a06a6704b514361685068acda4e65ed5d502f0d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
The controller concept in NVMf is like a session, for any
new connection in nvmf_vfio_user_accept() with the endpoint,
we treat it as a new controller, we don't need the `ready`
field in controller to indicate the connection state, we
need the connection state in endpoint, so here just use
endpoint->ctrlr point to indicate the socket connection
is valid or not.
Change-Id: I588dbba7973cb61a1d79d81324a43e052f7dafb0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
1. struct pxdcap.per is changed to struct pxdcap.rer
Which matches the name in the nvme spec.
2. use new API return value.
3. update specification changes.
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: Ida421c4cffd1c65d550e83011ab123b321ea9dff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8088
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
