These statistics can help to estimate efficiency of
Work Requests batching and show busy/idle polls ratio.
Send: the doorbell updates statistics for verbs
provider are incremented per each ibv_post_send call,
for mlx5_dv per each ibv_wr_complete call.
Recv: the doorbell updates statistics for both
providers are updated when either ibv_post_recv
or ibv_post_srq_recv functions are called.
Each qpair on initialization accepts an optional
pointer to shared statistics (nvmf/nvme poll groups).
If the pointer to statistics is not provided then
qpair allocates its own structure. That is done
to support cases when NVME RDMA initiator doesn't
use poll groups, so we can avoid checks that qpair
has statistics in IO path
Change-Id: I07dea603cb870b85ea23c42e8e2c4520b1c66252
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6293
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the quarterly releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 21.04
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I44d01154430a074103bd21c7084f44932e81fe72
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6167
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
With min supported DPDK >= 19.11 there is no need
to check that the buffer can be split over
several Memory Regions so we can remove this check.
Keep assert that translation length is not less than
request as a sanity check.
Change-Id: If61e673ecde28bbda8eb57a2768085715bed141a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is the first commit in a series which aim is to
unify MRs registration and memory translation in
NVMEoF target and NVME initiator RDMA transports.
Next patches will add usage of new functions in
RDMA transports.
Change-Id: I93153d497fc4554ced14edbe545961b78bda91e3
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5121
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
rdma_disconnect may return an error and set errno to EINVAL in case
of iWARP. This behaviour is expected since iWARP handles disconnect
event other than IB and qpair is already in error state when we
call rdma_disconnect.
Fixes#1704
Change-Id: I38710198d9b6b70b8940947f8e7c553cd4fbbd51
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5314
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There is nothing left here, so remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
This API is a wrapper for rdma_accept which allows
to remove spdk_rdma_qp_init_attr::initiator_side.
Change-Id: Iba2be5e74e537c498fb11c939c922b2bbda95309
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also, while we are here, consolidate setting SO_SUFFIX to one spot.
Previously, it was possible for a library to slip through
without an SO version.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4db5fa5839502d266c6259892e5719b05134518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Verbs implementation: doesn't differ from the original:
- send_wr: saves WRs in the qpair internal structure
- flush_wr: calls ibv_post_send
Direct Verbs implementation:
- send_wr: calls ibv_wr_start for the first WR;
Calls opcode-specific function to add a WQE to SQ
Tracks queued WRs to return a correct pointer to 'bad_wr'
- flush_wr: calls ibv_wr_complete - it flushes to the NIC
all WRs added between ibv_wr_start and ibv_wr_complete
Change-Id: I65a26914db688af20589f3b69a994d214d860726
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1659
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new RDMA provider can be enabled by passing
--with-rdma=mlx5_dv parameter to configure script
This provider uses "externally created qpair"
functionality of rdma cm - it must move a qpair
to RTS state manually
Change-Id: I72484f6edd1f4dad15430e2c8d36b65d1975e8a2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1658
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is a wrapper over RDMA CM rdma_disconnect function
The wrapper is needed since in Mellanox Direct Verbs
(aka DV) we must move qpair to error state manually
before calling rdma_disconnect
Change-Id: Ia8623c6989e7679591f2da56bafa7f4262eeebf9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1975
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
RDMA provider is used as an abstraction layer and allows
to add vendor specific verbs implementation. This patch adds
an interface to create and destroy qpairs and its implementation
using regular verbs API.
Future patches will add functions to queue/flush Work Requests,
enable usage of RDMA providers API in NVMEoF target/initiator and
add Mellanox Direct Verbs implementation. This abstraction layer
is flexible enough to add other vendor's implementations.
The choice of a specific RDMA provider will be made at
the configuration step, it doesn't add any runtime overhead.
Change-Id: If8eec5bd45c82c71f73a14f6e84121cd02a1d65d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
