Now that virtual mode namespaces can be chosen arbitrarily, there can be
holes in the ns_list. Make sure all of the virtual mode code paths are
prepared to handle these inactive but valid NSIDs.
Change-Id: I0d70fd9dae37a29a8358e1d38dcc6cac3237fd9a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365717
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This also requires vbdev modules to call spdk_bdev_reset
explicitly on the base bdev, rather than just resubmitting
the original reset bdev_io.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie33d506f68506096306c9f0a9ff5e11141578b15
Reviewed-on: https://review.gerrithub.io/365712
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We can do all of the completion work first, and then
make the decision at the very end on whether to
defer the callback or not.
This also removes the bdev_io defer_callback member -
we no longer need it since we now only defer the
callback itself, instead of deferring the full
execution of the spdk_bdev_io_complete() routine.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3285e34d2fbce34d4254dca2119561ff825ee9e8
Reviewed-on: https://review.gerrithub.io/365711
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In this patch, spdk_app_init will be merged into
spdk_app_start.
Due to this change, we need to change event_perf
to use spdk_app_start, since we cannot use spdk_app_init
anymore. So the related changes for event_perf is to
make it work with reactor framework.
Change-Id: Id67edf209fd628cca361a499068c93aeedfe6167
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/364153
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In this patch, we also update perf and identify
examples. If there is no local nvme device info
parsing, we will set dpdk initialization with no-pci
choice.
Change-Id: I58b2d291b7b53894aeb194a16798ff1c72cf25b4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/365361
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I82ce702ab1af83c2f5c0197a9766437f0f728dce
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365067
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Sync the spec header with the major changes for NVMe 1.3.
Some of the added fields may have been added in previous
versions of the spec.
Change-Id: Ia50a52f5192cf450bb5cc2d18fcc1f92ebce7f77
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362046
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia45876fb6f0eefd987cdb36521ecb591ef1f9499
Reviewed-on: https://review.gerrithub.io/365669
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This ensures a reset is completed after any I/O completions
that may have been deferred.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9efe5c07435371ff8c8e0c826349e9349ade02f3
Reviewed-on: https://review.gerrithub.io/365663
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I941a4cb5563cebb2e68b48d3a74b4b73af0e9657
Reviewed-on: https://review.gerrithub.io/365662
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
If the user specifies the name of a bdev that is not an error injection
bdev, bdev_inject_error would cause a NULL pointer dereference.
Change-Id: Ibcc7daee5a75ac37c3567ebc048662e0165c2860
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365526
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This ensures all I/O will be aborted and that no I/O
will be submitted while the reset is ocurring.
Change-Id: I0f5c993b91d9be6073c6ddf66ae12010f56f864c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364682
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1e272c63a5d863c92f1aa8299a9d98dcb72d0b13
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365082
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
DPDK's use of getopt() needs special handling of the optind global
variable since we are passing it a separate array of arguments (not the
typical argv and argc). Set optind to 1 internally to env_dpdk so that
the apps don't need to know about it, and restore optind in case the
calling app is also using getopt().
Change-Id: Icbf07002c99fa9f94c866e8eff707124b0ef679b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365062
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id0b79002744006fd5bce14b3a7fc1371bf91dcba
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/365107
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the necessary RocksDB Makefile changes into a Makefile
fragment, and put that fragment into SPDK. This allows SPDK
changes to update the RocksDB build.
Change-Id: I4fee0ba4e1ec7fe35b51187c8700109e9cd29206
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365057
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This code was previously in our fork of RocksDB. Move it here
so that API breaking changes can update it.
Change-Id: Icae3e22380b9bd3de8c1ec5b6f82909f812d204b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364531
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Switch from the SPDK event library event to the spdk/io_channel.h thread
message abstraction. This partially decouples the bdev layer from the
SPDK event library.
Change-Id: I2300b8d84c357d6d8cab0d370d7681e948fe97d0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365077
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is faster than spdk_get_thread(), which iterates over all of the
threads under a lock until it finds the current one.
Change-Id: I957a68438efb5b7d632d2b9b1b567fed7714e02a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365079
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To differ them from upcoming VHOST_BLK trace flags
Change-Id: I1e82fb3430a6533cb9980b430d144ea28d269d59
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/363583
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The math works out so that index is always in range here, but add an
assert anyway to catch potential mistakes in the future and to placate
scan-build.
Change-Id: I09ad37dde56bc315543b3c142d91ca9a49e9b32c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364530
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These commands should be treated as aborted by spec,
so correctly deliver abort notifications when a
qpair is deleted.
Change-Id: I8af47a3f42f5695ef8e1a70813662e69102720b2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364681
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch doesn't use it yet but sets up the ability to so that
upcoming unit test pathces can. The next patch will include use
of wrap in one nvme UT and then following that the wrap and
today's use of globally controlled stubs will be morphed into a
simple mock type capability for spdk unit tests.
Change-Id: I252160266f0b5c76e50fd213cb3e1686d48b9d0e
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/363441
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There are several possible usages of this information -
the first will be related to starting a poller for a bdev
channel when there are I/O that need to be retried.
Usually we can retry an I/O when a previous I/O completes,
but if there are no outstanding I/O, we need to start a
poller. This count will help us make that decision.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifff7d99970510785a1cf30d20b86b3974ce8a106
Reviewed-on: https://review.gerrithub.io/362235
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Removed deferred tasks and dynamic memory management in task processing
in vhost_scsi. Each vhost task will now have it's own iovec array
Change-Id: Ie51a2404e9cd3c4e03bcea5a8d5b16498dd4d093
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/363342
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It is not actually useful to be immediately returned
a handle to the bdev_io. There isn't anything valid
that the user can do with it at that point. Instead,
return an integer error code.
Change-Id: Iffa9a8dc5b2eefab57e3cc1f68919985431d17d1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364137
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Preivously, we can only get part of the log page
entries due to the limitation of buffer. With this
patch, we can get all.
Change-Id: I81b8afc73c108dac65d1ff5fe8d03bda41fa29a1
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/363323
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I29d3f856a1189fc591097488829ded8a508fbed6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364670
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ifd4f717ea6e12769c845e10578517da0a28dca11
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364669
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The VTune ittnotify_static.c code, as currently shipped, triggers
sign-comparison warnings when built with SPDK's CFLAGS.
Wrap the file in a pragma to disable the warnings for just this file and
allow a build with --enable-werror to pass.
Change-Id: I701fb6b88f09564fdadfd17e1d16d80df455940b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364511
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Instead of crashing if the task count isn't 0 when
shutting down, just print an error and allow the
tasks to leak.
This isn't the long term solution, but it's a lot better than
crashing.
Change-Id: I5d388c759b563953dce8239e9a4e62c3e3db16c4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364490
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Extract vring_dev to iovec translation logic to common place.
Change-Id: I0c6fc5582dfe341e867ce6749ff29d14a9d12d94
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/363582
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Theres no need to have vhost SCSI (and incoming vhost block) structures
available in public API. Generic spdk_vhost_dev might be used to
communicate with backedns. Backends are responsible to check if type of
passed vdev valid.
Change-Id: I850a1cc661166ee146d513b0069bb40edc9a761a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/363581
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Rework reactor<->pthread comunication logic, so we can reuse it in other
backends.
Change-Id: Id0f02fc9e1e0d9540f8efebdb515384b5714c966
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/362548
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Moved vdev initialization inside spdk_vhost_dev_register, so that
particular virtio device implementations don't have to e.g.
manage socket path.
spdk_vhost_dev_unregister was renamed to spdk_vhost_dev_remove
Change-Id: I240385ba25278c056737fed77f21695b2e787c6b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/363584
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I38dc084783859851f70a3b0c78e3546c5dff1872
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/363609
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ied778fc41ddc5ff7563408eccafc0e0654287b19
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/363608
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ica7f76a5354b27e6e5fd7114de1fdba46434b073
Signed-off-by: Roman Sudarikov <roman.sudarikov@intel.com>
Reviewed-on: https://review.gerrithub.io/362994
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I338f47000a1c898309a7421fe52f148bae9f2e6b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364116
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I4d281be99553629563026cc4f9ab890d0a97986c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364115
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Dynamically allocate bdev names to remove the arbitrary 16-character
name length limit.
All of the existing product_names are constant strings, so those can
just use string literals instead of a copy per bdev.
Change-Id: I3280da67a4fcf2e4ec8ee8193362ca1b96a9c0cb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363601
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Need to free this variable.
Change-Id: I78a7d5b312db6487ed65b9d314590a28408da761
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/363477
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch prepares support for 64 bit values that will be used in lvol bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib5c8a438135e246c69887c4775c9ea6f0fa6eb1b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/363344
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
This function is no longer used for integer parsing, and it does not
work in locales with decimal separators other than '.', which is
required to be the decimal separator for JSON numbers.
Change-Id: I8e97e15cc2699e647652f83b71676c11d32d29ce
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364134
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Avoid a trip through floating-point numbers when parsing JSON numbers as
integers.
This will allow parsing 64-bit integers that cannot be represented in
double precision floating point.
Change-Id: Ic428c9f12e44e6dbee72f39a91ecb56ab30b365f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364132
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ia20284118077e49f2988f30469c3e3f4100ebdf0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/363607
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Support passthru for NVMe admin commands.
Change-Id: If926f2ecabb078a553158f544c10a92452dbdb39
Signed-off-by: Edward Yang <eyang@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/363294
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I05bb8294471bac3f9ecc4744e28d7d40e57e5364
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362622
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
issue: ASAN reported that param_ut free already
freed memory.
Reason: spdk_iscsi_negotiate_params does some
modifcation on params and may free old params
and create new params. To solve this issue,
we need to input **params but not *params in
spdk_iscsi_negotiate_params
Change-Id: I68658fd8e08f317343753620692f04e7b0b57577
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/363670
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also provide an option in perf tool let users to
disable it.
Change-Id: If4952513d77cecaa4f9403fbea811d86916ee87c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/363311
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Resets were not correctly aborting all I/O.
Change-Id: I03fd5f7094b3aa53f070eb731c30e5f9bfbfea16
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/363626
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The stricter warning levels (-Wimplicit-fallthrough=4) require all-caps
FALLTHROUGH, so update the existing comments to match.
Change-Id: I5f8608101cad31d8ea8e84d48604397f98400e87
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363491
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Mark the intentional switch/case fallthrough locations with comments
recognized by -Wimplicit-fallthrough=4 in GCC 7.
Change-Id: Ibf2b077d9432e7f23a3833f98edd4768e5e8cfe9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363490
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
On older kernels that don't have VFIO, stub out the vhost IOMMU
functions.
Fixes build on older distributions (e.g. CentOS 6).
Change-Id: Icda9998e494c24d252511a4da93ecb56502fe5a7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363473
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Instead of an array of queues per core, allocate
the queues per management channel.
Change-Id: I4ace5bd13362a549a45aba62e978dabbbe1a333d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362617
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: John Meneghini <johnm@netapp.com>
Change-Id: I5bad83197824dfb9042540c573134962a917b8bd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/363152
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reset requests will now pass messages to all channels,
correctly abort all queued I/O, wait for that to complete,
and then pass the reset request down to the next lower
layer in the stack.
Change-Id: I167cc5f424d3d0fc52b041bda63ee176f6acea29
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is now just one type of reset, which is equivalent
to a HARD reset previously.
Change-Id: I955b219cbc5c25793d97de1cc003b30ae99313ac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362615
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I61b6579e8698d16e5a8ab74d304af9ea53f9dce4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363307
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also move the validation of serial number length into the library.
Change-Id: Ibc9384fc1fccb87bd15b75da7f3942570900bd96
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363304
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ic1b7b1b6497dbae5ceda9bb91f9d4d2037b7243f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363301
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_nvmf_subsystem_exists(nqn) is exactly equivalent to
spdk_nvmf_find_subsystem(nqn) != NULL.
Change-Id: Icafa43166c99d1364b49cef30a5ade4b6625bcd5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363299
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I02a44c3790830b3918dca418c6bb85e82ddac273
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363298
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This structure is not part of the public API and shouldn't be in
spdk/nvmf.h.
Change-Id: I29fbb269d3ab77cd9fa9908726abc7c7a4c6d8c1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363296
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each call to get_scsi_lun is preceeded with the same check.
Change-Id: I4597674f0024e923908d85bbfbd5404c500fddb1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/363172
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Synchronous blobfs channels may allocate requests from
the synchronous thread, but free the request from the
async thread - especially for code that is shared between
sync and async modes. So add a lock to the request list
for sync channels only.
Note this only affects metadata path (i.e. sync, delete, open)
and not I/O path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I932c500807c2f459c697fab2ffd91a88b88b0c87
Reviewed-on: https://review.gerrithub.io/362964
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds property of transport protocol id to spdk_scsi_dev.
This allows to change it depending on which appliation is using
the device. Previously only iSCSI was used for all.
Setting protocol id is done at the time when device is added to
vhost controller (vhost) or target node (iSCSI).
Please note that for SPDK vhost SAS protocol id is used,
as that is what kernel vhost reports as well.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I455a856c5d7796a749b6650fee0218d526e094ed
Reviewed-on: https://review.gerrithub.io/362864
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since vhost_scsi::new_device() would look mostly the same in vhost_blk,
most of it's logic has been moved into spdk_vhost_dev_construct(),
which is now renamed to spdk_vhost_dev_load().
Change-Id: Ic6db93273f916bd021c2ff68946706d055a514d6
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/362547
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is not vhost SCSI specific.
Change-Id: I7eff272fcd1aa47135de7178d0763b1793b298ec
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/363087
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function is not vhost SCSI specific and can be reused. Also change
type of returned value to 'void *' so no explicit cast is needed.
Change-Id: I33a37856903dacdddae9e73e695cc66465ade089
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/363086
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
vqueue/vring management shouldn't differ between vhost-blk and
vhost-scsi, so it has been moved to vhost.c/vhost_internal.h
Change-Id: I5ecf2f7a34ec28deb94c7abef4225038913edf0d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/362505
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The file's lock does not need to be held across
calls to this function as the file is not dereferenced
at all.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idf0a52f2528521f12e45963bb0ab1f414b37380f
Reviewed-on: https://review.gerrithub.io/363138
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
SPDK subysystem initialization now is async,
so we need to guarantee the initialization is done,
then call event composed of start_fn passed by user
in spdk_app_start.
Change-Id: Icc790cbb3da04c1063204938b79140c4218986e4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/362654
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I93684a004e2ae276734edbb4767b5ba1bac3dd48
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/362111
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The next patch will make bdev modules init
in the async manner.
Change-Id: I4909c80510d786daf54003b99a5925428cf37373
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/362110
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
- rename spdk_malloc_socket to spdk_dma_malloc_socket
- rename spdk_malloc to spdk_dma_malloc
- rename spdk_zmalloc to spdk_dma_zmalloc
- rename spdk_realloc to spdk_dma_realloc
- rename spdk_free to spdk_dma_free
Change-Id: I52a11b7a4243281f9c56f503e826fd7c4a1fd883
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/362604
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also add tests to ensure against regressions on this fix.
Change-Id: Ic617f75f1865f17121896f7622290e64020bb2d6
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/362275
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows virtual blockdevs to inspect newly-added bdevs and
potentially insert themselves automatically.
Change-Id: If567a950d753e5f08861a5de22a2e1350376e50f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362077
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously, each freed cluster was unmapped individually.
Instead, coalesce unmaps for contiguous clusters to reduce
the volume of commands sent.
Change-Id: I6ea1d2e1235e3c030cd2826c97e57aca571bd2ae
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362773
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I03d042cbb6de08f7e07b8c0ccc8af44d7b16ae3b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362614
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently this is just a placeholder, but eventually
it will be used to replace the per-core queues.
Change-Id: Iefeb90711bcf001a383e36cd4eaadf813af66506
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362613
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For a given I/O device, call a user function on the correct
thread for each channel.
Change-Id: I568a443184ac834c80c5e36b80aa9b6f8bb0ac99
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362256
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This serves two purposes. First, some older compiler
chains don't support thread local storage. Second,
we're going to need a way to iterate the list of
threads in the future, so keep them in a list.
Change-Id: I80e709f4665afb03cf4bcf0db19ef8ea353acdc1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a thread is registered, the user must provide
a function pointer that can pass a message to that thread.
Change-Id: I743b5e0d6e3b5118c0a68d2fcedbccdd6fb237f9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362067
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This will be used in the future to pass a message
to any given thread.
Change-Id: I3be5fe66244e360b7667427647fd8fdede110930
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362066
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This wasn't used anywhere and we currently believe there
are superior software-only techniques for controlling
quality of service.
Change-Id: Icdadd5870ed0629b338c307d2619bbc242c3e7a3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362065
Reviewed-by: Jim Harris <james.r.harris@intel.com>
General cleanup.
Change-Id: I31083a7210634b8fc9d1336aff08f9793b249930
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/362296
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Implemented vhost abstraction layer in preparations for vhost-blk.
Generalized vhost interface and separated vhost-scsi code.
Code placement:
vhost.h
* vhost_startup() & shutdown()
* public generic controller API
vhost_internal.h
* includes rte_vhost.h from DPDK
* struct spdk_vhost_dev (it has to be inherited by vhost_scsi)
* vhost_dev management
* register/unregister() to be used in new_device()/destroy_device()
* construct/destruct() to be used on permanent creation/destruction.
* reactor core management
vhost_scsi.h
* spdk_vhost_scsi_dev management
* reading VhostScsi section of vhost config file
* creating/removing controllers
* adding/removing devices to controllers
vhost_scsi.c
* virtio scsi logic
* new_device(), destroy_device()
Change-Id: Iaf661b14eba034593bef24853c525935d9b18e46
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/361963
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
g_num_ctrlrs can now be fully encapsulated in vhost.c
Change-Id: I812c9ec0a21fec37025665104172ff5ac71ff3bc
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/361951
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Separated new function spdk_vhost_dev_unregister() out of
spdk_vhost_scsi_dev_remove().
Change-Id: Ic604f10233ca3f7998774595c10d6c120dd43e2e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/361948
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added new struct and separated new function spdk_vhost_dev_register()
out of spdk_vhost_scsi_dev_construct().
Change-Id: I97c303e40759426fa68a097c7ba47c62fbc97bd0
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/361882
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
As a consequence MAX_VHOST_DEVICE define was removed, which was a
copy of a private DPDK define. Using it was more likely a hack.
Also renamed MAX_SCSI_CTRLRS to MAX_VHOST_DEVICES.
Instead of dpdk_vid_mapping, a new function
spdk_vhost_dev_find_by_vid is used. It simply iterates through
all the controllers.
Since this patch required to move the definition of spdk_vhost_ctrlrs
array, it has been renamed to g_spdk_vhost_devices.
Change-Id: I9b70ccb97ffaa90a22c6a1c90850b3205a9b9b27
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/361881
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Moved controller-related variables from spdk_vhost_scsi_controller to
spdk_vhost_dev. Generalized vhost to operate on non scsi-specific
controller struct.
Now spdk_vhost_scsi_dev contains direct spdk_vhost_dev field instead
of a pointer. This means there is no more allocation/deallocation
on poller start/stop.
Change-Id: I99739d58833ee023a75cb530cc80294e02f28090
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/361880
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
* spdk_vhost_dev_create() operates on **existing** vhost_devs, rather
than allocates and returns them.
* spdk_vhost_dev_destruct() no longer deallocates devices
This is a preparation for making vhost_dev a direct field of
vhost_scsi_dev (no longer a pointer). That patch would be too massive
to contain this one.
Change-Id: Idec84cee22795ad88e8499eb933664c4b8c7d101
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/362187
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Keep a global counter of the number of opened
blobfs instances. Allocate the cache pool when the
first instance is opened, and free the cache pool
when the last instance closes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99db2b587b738badcd2a54c9f5dc6ec8370ce22c
Reviewed-on: https://review.gerrithub.io/362606
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If error injection is enabled and we choose an I/O to
fail, do not submit the I/O and fail it when completed -
just fail it immediately.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib58513f66e0df22c36137c0adb273fc31066c983
Reviewed-on: https://review.gerrithub.io/362386
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is unused an misleading.
Change-Id: Idb2e3c1b244dfb4aa99bcecee8a3dba6efbc33aa
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/362335
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This case will be used in incoming vhost patches.
Change-Id: I62d569c01e9b8bf25c9293dff827d1b4406cea04
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/362334
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Only DPDK primary processes can initiate device probe.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia9f966a65fc98ad92b48814dbd6f36f78905162f
Reviewed-on: https://review.gerrithub.io/362452
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia3b3afc1a5331fe2b89d75eeddfd6e4430567cff
Reviewed-on: https://review.gerrithub.io/362450
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
After changes done in commit f325e71c, closing old FD is delayed until
VHOST_USER_SET_VRING_ADDR. If VM is closed before this call, original FDs
remain during vhost_backend_cleanup. This resolves issue #162.
This patch closes second set of FDs during vhost backend cleanup.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ieb9d123c987009ac451b6214bb74d2720d852781
Reviewed-on: https://review.gerrithub.io/361787
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
NAA locally assinged designator(3h) format was defined in SPC4,
as SPDK claimed can only support SPC3, so we used NAA IEEE
extended identifier format instead.
Change-Id: Ia4c153263c6b89ae8160488deaf16fd0e5cac8dc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/361904
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Move mutext locking to API functions to prevent deadlock when memory
registration fail. Fixes#163.
Change-Id: I4804f671ed9d82ede87bc9439c36368b94e2d636
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/361934
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This ensures that all spdk_bdev_io structures now have
an attached channel, simplifying some future work around
things like counting the number of outstanding IOs for
a given channel (which otherwise would have had to
account specially for resets).
Reset semantics are still that they affect the entire bdev
and not just the channel it was submitted on.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8aad21a88faacecfd94bdba350059528eb62c390
Reviewed-on: https://review.gerrithub.io/362251
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
1) Consolidate the checks for a null LUN
2) Eliminate a bunch of static functions that are no
longer needed due to #1
This prepares for some upcoming bdev reset changes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I38475581b69ba4a034fc7b9e133cfcdfc535a5d3
Reviewed-on: https://review.gerrithub.io/362262
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This prepares for translating -ENOMEM from the NVMe
driver into an associated bdev status code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0250d5d48e2131da31b71cf9695d12fee67b0fbb
Reviewed-on: https://review.gerrithub.io/362234
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The user should not see the bdev_io status directly; the NVMe and SCSI
error code wrappers provide the ability to translate to the desired
format regardless of what kind of error is stored inside the bdev_io.
Replace the spdk_bdev_io_completion_cb status parameter with a bool
simply indiciating whether the I/O completed successfully.
Change-Id: Iad18c2dac4374112c41b7a656154ed3ae1a68569
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362047
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is no longer used anywhere. For the places where we previously
used it, we've since found alternate solutions that do not
require it.
Change-Id: I738a80b95ef50348ce1c14969a3812b0a625b3fd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362064
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This isn't strictly necessary, but follow the
pattern for sync and I/O devices.
Change-Id: I34b1bd6f9da06008e419f55ee9810022f5fed3d5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/361674
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to no longer use the unique=true flag as well
as assign sync channels different queue depths.
Change-Id: I0b3129a3139bf39d745c2a4dc1d9f402c0a8faa8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/361673
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to have a different queue depth
on I/O channels than on metadata/sync channels
Change-Id: I30dfc95af550082efffec4b12ed6c4cd4b8c11cf
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/361672
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This temporarily increases the size of the sync channel
to 512 (like all of the other channels). This will be
fixed in a later patch.
Change-Id: I679f1cb7c9f7afdad0acf9a3a26f9632f60cc510
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/361670
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to allocate different size channels and
not require the unique flag.
Change-Id: I4b1ffd244b60e9e9ab06f9ab4da8161ab57e1169
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/361668
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
An ECN to the NVMe 1.3 specification has clarified that the NQN may
contain 223 bytes before the null terminator. Make all of our NQN
length checks consistently enforce this behavior.
Change-Id: Iebfd57d11abea64964c7a6ad9d886e40efa243c3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The channel memory isn't allocated by these
libraries, so they can't free it.
Change-Id: I30909fa4e77bc5a41b45230f04ba5fe75b172dbf
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Separate the maximum metadata operations from the
maximum channel operations.
Change-Id: I1bbd440ab094a2a2e19c9a5b71724ac91ba88e42
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This will need to be configured globally for all channels.
Change-Id: I773252f220373617f8d09d1f24243db8095cf8a4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Specify the function as a parameter to spdk_scsi_dev_queue_mgmt_task.
This makes the API clearer by making it explicit that the management
function is required for management tasks.
Change-Id: I92d893aadb6faebea81dd79729894d2c2fddf088
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The type of a task is known due to the function used to submit it:
- spdk_scsi_dev_queue_task() for normal SCSI command tasks
- spdk_scsi_dev_queue_mgmt_task() for management tasks
Change-Id: I183a1f89ab85f3fce1de2491e77d95d4b147fd72
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI read and write functions use the same LBA range check, so move
it up to spdk_bdev_scsi_readwrite().
spdk_bdev_scsi_read() previously passed task->transfer_len / blen rather
than xfer_len to the LBA range checking function, but this should
actually be using the transfer length field from the CDB (which is the
xfer_len parameter).
Change-Id: I8285abf936a18a0baf7cc25709945637e4e6b87d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added new rpc commands together with underlying vhost API and tests.
Change-Id: Ib9c6a530d0909193ea5115aaac4920c44f39613c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
If more than one controller is added to guest the same memory table is
set multiple times making VFIO registration/unregistration failures
Change-Id: Ib55c38e292495e549c070beb0234e73f269e63d5
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
It'll trigger interrupts even if VRING_AVAIL_F_NO_INTERRUPT is present.
Also delegate notifying check to separate function vq_should_notify. It
will be expanded even more once we implement VIRTIO_RING_F_EVENT_IDX
support.
Change-Id: Ic41fd18c9c005c6266b109b0eda4a6dfaef5f06a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Added new struct field and an rte_vhost_get_negotiated_features() call.
Change-Id: I5937026720b5341c7377c27fee682996b51e836e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Add a helper function to find the iSCSI task given its nested SCSI task
structure, and use it to remove all casting between spdk_scsi_task and
spdk_iscsi_task.
Change-Id: Idc7c6d0a3b4d53041916d25a1bdecedfb56b94f9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch address the issue:
https://github.com/spdk/spdk/issues/151.
For cache_append_no_cache in cache_ut testcase,
there is resource contention for buffer among two
threads in the following two functions.
Thread 0: cache_free_buffers
Thread1: __file_flush_done
When the thread1 execuctes __file_flush_done,
it calls the call back: __sem_post defined in
following statement in spdk_file_sync
_file_sync(file, channel, __sem_post, &channel->sem);
Thus Thread 0 will execute next function
cache_buffers, and it frees the buffer.
Then Thread 1 continues executing the remaining statements
in __file_flush_done with the assert function, and touches
the space already freed.
So it will be safe to move ahead the next buffer check.
Change-Id: Ic007b3481f4e3a17d47eeca5c9c802001949a5ab
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Also change the discovery/nvmf.sh test to use it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I56bce9a84bd46f13b6d4f34da81abf23413f2598
Factor out the common data direction Check Condition logic from read
and write.
Change-Id: Ia2fbd5f69eefd826ebb5ab2a8e99aeb380f1b7ea
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
What was previously called "maxlba" was actually the block count
of the device, which is the maximum LBA plus one.
Change-Id: I5e141a3eb0c79b2aa70006739c5586cb50744d3d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI library already provides a callback when the task is released
(free_fn), so the user can update their own task counter.
Change-Id: I7fb13f6fff66dbba2315fd03fb06e49f793be123
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The task free callback function is required, so make its assignment part
of task construction.
Change-Id: I2f5fdf73b064653ee85b4e7961cb1653a0a4107d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This fixes spontaneous vhost hangs on SIGINT shutdown.
Apperently during vhost_destroy_device(conn->vid) from
line #284 another QEMU message might arrive, causing
vsocket->conn_mutex deadlock. (line #286)
Change-Id: I4f1c31a52facffd1eb1e1192591095f00da55031
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
If VRING_AVAIL_F_NO_INTERRUPT flag for queue is negotiated, guest can
set this flag in avail ring to suppress interrupts from host.
Change-Id: I2043067de33da009a974be5915ae81b1343fc424
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Unit tests will be added as part of a separate patch updating all UT for
nvme.c. Global used for timeout value so it can be easily overwritten
by the upcoming unit tests for this function.
Change-Id: I7fc15aab91601ac57c94cae266b212c0998d2495
Signed-off-by: paul luse <paul.e.luse@intel.com>
This was implemented as two functions, but it
is much simpler as one. Also, the public function
was way at the bottom of the file instead of near
spdk_bdev_put_io_buf.
Change-Id: I3a90688910b0542cc77b6333bab15132cf514eeb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This was implemented as 3 separate functions but
it is simpler as 1.
Also, this wasn't previously freeing the buffer pools.
Change-Id: Ic1b2b3a0596e745a223099cb2a79bea6ef5c69cc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This was broken into three functions, but it is
a lot simpler as one.
Change-Id: If58ad50fe7d4f65c598b62f24e9e1ce7a64fdd8e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is better organizationally, but also will serve as
an io_device in the future.
Change-Id: I6d65cf39df59e874d13f5fccc5a489720e86c48f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Return types should be on a separate line for definitions.
Change-Id: Iaa38dd00042359fc6640fc67053bd69ebbb7af03
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Make the buffer allocation work for all types of
commands, not just read.
Change-Id: I72d8f67a724566630e7c4a74759fcb08449f7de4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Eliminate rte_memcpy dependency by replacing it with
regular memcpy. This may impact performance, but the only
use of rte_memcpy was in the malloc bdev which is for
testing only.
Change-Id: I3e8592cb08262272518ec3d29ea165b4e8f48a5c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Blockdevs already indicate support for unmap via
spdk_bdev_io_type_supported(bdev, SPDK_BDEV_IO_TYPE_UNMAP).
Change-Id: I634f27a281fd900bb3a6da2e4ff8a74e43579578
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
We plan to use these buffers for more than just reads.
Change-Id: I8fa6cb432a6cfe4406fbf240cd3aa2ae4ab5f3d5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The user can get there via the bdev, so this didn't
have a purpose.
Change-Id: I7f85bb71d5ee238d37ba3624d0ac68a161c95e49
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Older kernel headers don't have the definition of this macro, so define
it if necessary.
This is the same workaround as used in rte_vhost/vhost.h.
Change-Id: I01e0661db05de517adf8e24a47c63d32853cd385
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
vhost_net.c file is not needed and fail scan build so remove it.
Change-Id: I5817201373f7253cc8bc1a9bdc5884197e166a14
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
guest_pages is being allocated in vhost_setup_mem_table(), reallocated
in add_one_guest_page(), but never freed. This patch fixes a memory
leak.
Change-Id: Ie381c43bafea5cdea2ac9f057c0282044a340dce
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
This prevents from destroying & recreating user device in "incomplete"
vring state. virtio_is_ready() was returning true for devices with
vrings which did not have valid callfd (their VHOST_USER_SET_VRING_CALL
hasn't arrived yet)
Change-Id: Idc4b41efd544ff5c6b093a5a48798b41c55bbe06
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
vhost-net devices might keep track of last descriptors indices by
themselves, and assuming they initially start at 0, but that is not the
case for vhost-scsi. Initial last descriptor indices are set via
VHOST_USER_SET_VRING_BASE message, and we cannot possibly predict what
will they be. Setting these to vqueue->used->idx is also not an option,
because there might be some yet unprocessed requests between these and
the actual last_idx. This patch adds API for getting/setting last
descriptor indices of vrings, so that they can be synchronized between
user-device and rte_vhost.
The last_idx flow could be as following:
* vhost start
* received SET_VRING_BASE msg, last_idx is set on rte_vhost side
* created user-device, last_idx pulled from rte_vhost
* requests are being processed by user-device, last_idx changes
* destroyed user-device, last_idx pushed to rte_vhost
* *at this point, vrings could be recreated and another SET_VRING_BASE
message could arrive, so last_idx would be set*
* recreated user-device, last_idx pulled from rte_vhost
Change-Id: I247ba4e461a2a2b524ccade364f5b7bf260f7538
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
There is an issue when QEMU sets new memory table just after guest OS
starts booting. Then, if guest OS tries to issue any I/O to device (e.g.
using BIOS INT13h - EDD) it will get stuck because previous addresses of
mmaped memory might change.
To fix this issue, defer using the new mem table until after we receive
the first SET_VRING_ADDR message. SET_VRING_ADDR will be sent by QEMU
when guest OS virtio (e.g. virtio-scsi) driver starts initialization.
At this point it is safe to invalidate the old mem tables because there
will be no more outstanding IO at this point.
Change-Id: I24772be87a8b6c8781868b9b7773317761499748
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
For now DPDK assumes that callfd, kickfd and last_idx are being set just
once during vring initialization and device cannot be running while DPDK
receives SET_VRING_KICK, SET_VRING_CALL and SET_VRING_BASE messages.
However, that assumption is wrong. For Vhost SCSI messages might arrive
at any point of time, possibly multiple times, one after another.
QEMU issues SET_VRING_CALL once during device initialization, then again
during device start. The second message will close previous callfd,
which is still being used by the user-implementation of vhost device.
This results in writing to invalid (closed) callfd.
This patch destroys vhost device before setting callfd, kickfd and last
vring indices. It will be recreated right after (with updated vring
data).
Change-Id: I293bd91106f53f6c2f65d8b8a41f47ae7548cddc
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
This will be decoupled from the build to start. Next
patches will modify this code to prepare it for use with
SPDK vhost-scsi. The final patch will replace the existing
v17.02-based code with this version, and make the necessary
SPDK vhost changes to use it.
This enables to better track the differences between upstream
DPDK and our internal copy, while not breaking the build at
any point in the git history.
While here, expand the POSIX include file check to exclude
any directory starting with lib/vhost/rte_vhost (which would
include this new directory).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf1202c1b7a898edff12aa226943a08b578cf962
Scan the source for POSIX includes outside of the
allowed locations in check_format.sh. This only
tests for POSIX headers - not Linux Standards Base.
Also, fix one bug that was caught by this addition.
Change-Id: Ib0ca93fe6ac552dc49d95b27b4803e40282027e8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
LOG_DEBUG is a symbol defined by POSIX, so if sys/log.h
is included the symbols conflict.
We'll need to push this patch to upstream DPDK too.
Change-Id: Ib263731864aca4791226ea6e3abb5ddfe42e97d8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
FOREACH_DEVICE_ON_PCIBUS macro has been defined since rc2.
Change-Id: Iad61401520735dfde4e5715c32e74a54a2dff7da
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Replace with it with check the returned req
via spdk_unlikely macro
Change-Id: I1202b3955af9a68496d8ced7cf66c20cf26f7fff
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The SCSI layer always passes task->iovs to spdk_bdev_readv(), so there
is no way for task->iovs != bdev_io->u.read.iovs to be true.
Change-Id: I4c0a2075c6e50e4304d62707a29bededa37b4e5c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI task bdev I/O should never be pending when spdk_scsi_task_put()
is called, and just setting the status to failed is not correct (when
the bdev eventually completes the I/O, it will write into the now-freed
bdev_io, which may be reused by someone else).
Change-Id: Iaad6ce9ab41539652abc40147fed47c5012109dc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI layer was not using the task ID for anything; the iSCSI layer
was using it to store the task tag, so move it there and rename it to
"tag" to make its purpose clear.
Change-Id: Ibda4f4e215056116b9be4a3a0264f98bc4c29535
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI layer doesn't use subtasks; these are an iSCSI layer concept.
Change-Id: I83871f02362f10fd4ecd4b2a1544eb76bfa53595
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
In the pattern set by spdk_bdev_io_complete_nvme_status(), allow
blockdev modules to complete a bdev_io with a SCSI status code.
Also move it to the internal bdev header file, since only bdev modules
should be setting bdev_io status codes.
Change-Id: I8b6afad2c02d7c010c5e60f06a7c7e0785eb87ca
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the scsi_nvme translation code from the SCSI library into bdev, and
provide a generic way to translate any bdev_io status into a SCSI
status.
Change-Id: Ib61a6209387c24543e31574e2b5ca249e2ac8b74
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since we keep a copy of DPDK vhost library, the header file don't
have dependency on DPDK vhost library.
Change-Id: I14d48e10227633547231e4f429e7375ffa76128d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
The code will locks clear to put those definitions into tree.h header
Change-Id: Ib1a34f19d9849acd7ea979eb0a6e153b0e8e39de
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Since DPDK 17.05 API rte_eal_device_insert is only used for
virtual device scan and initialization, for PCI devices
which use Domain:Bus:Dev:Function, this API is no longer
valid.
Change-Id: I1ab63dfc3af188d01836e67cd8db745e035fc450
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
These channels can handle generic bdev context.
Change-Id: I61f41884ddf4cf86fa156e9051421b354bbb349d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
When destroying a connection, we need to check if we got to
full feature phase before freeing any io channels. This is because
the io channels are only allocated as part of a successful login.
The Calsoft iSCSI test suite has tests which will fail login.
Since the test system was just using a malloc backend with memcpy,
so even though a channel was NULL in some cases, it was never used
since the memcpy engine doesn't need it.
This prepares for some future patches which extend the use
of io channels in the bdev layer.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2fb7b18a781caa0aadca319aa1e61a6ccf2c55fd
This allows astyle to format the cast of address-of operations
correctly.
Change-Id: I9c8a4545c44601e769acc712ec7acf3a96f45ebb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The ISID field is a 6-byte field in network (big-endian) byte order.
The previous code was casting the uint8_t isid[6] value into uint64_t,
which was actually casting the address of the first byte of isid (not
the contents of the array), and it was also not correctly converting
byte order.
Change-Id: Idd114e06d30040cf28931d7da7ffdc8d6c45e82a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Avoid allocating a large amount of stack space when increasing
NVME_MAX_CONTROLLERS.
Change-Id: I7017e5ed9f4d4f5c860dac608c3e5ae3c35864e7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The contents of struct spdk_scsi_lun don't need to be part of the public
API.
Change-Id: I101b77871054557380610fd901ab38bada463202
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The VirtualBox emulated NVMe device will intermittently
hang on the first read/write command after an I/O
qpair has been allocated. The frequency of the hang
diminishes if a delay is added after allocating the I/O
qpair - until it disappears completely with a 100us delay.
So add a quirk to insert this delay.
Note - the 100us delay was tested by running
the hello_world example app 50000 times.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I237e31b1b8a1a1e28262851ae0a21cd7345f0f1a
Fixes a scan-build warning about using qpairs after they have been
freed.
Change-Id: I263eabd6b784acf540c66136965f7705ef110a78
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix up the existing comment blocks misaligned in the first column.
Also add line numbers to the comment checks.
Change-Id: I9d28c365271df36e7013d74cbb02d0023ab4f581
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch assigns correct value to page control.
Now that page control value is correctly taken from CDB,
error via sense data is reported when processing "saved values".
"Changeable values" are not supported, so all parameters
are reported as not changeable when requested.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I41378c96b1e8c716b5d0ce4b72777065fb122228
Fix up all existing spacing errors in comments and add an automated
check for patterns like /*comment*/.
Change-Id: I28f61c93612dc0f8aed66bd509da78e91ea9737e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Vhost needs to register memory given by guest in VFIO container to be
able to do any DMA using this memory.
Currently DPDK doesn't provide any interface to handle guest memory, so
for now lets find container fd in /proc/self/fd/ directory and provide
some VFIO internal API that finally should extend DPDK API.
Change-Id: Iee9d496367ccd61219068fc0eadc17e786ff0731
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
The new format is: domain.bus.device.function
For this format, since we use '.' as separator,
to avoid misusing, we only support the following:
1 domain.bus.device.function ( 4 values provided)
2 bus.device.function (3 values provoided with domain = 0)
3 bus.device (2 values provided with domain = 0, function = 0)
Change-Id: Ide03db38b4ac7802cf36f0e536e8b997101d6cd3
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
According to the scsi standard, all ASCII data fields "may be
terminated with one or more ASCII null (00h) characters"
[7.6.10, 4.4.1]. Windows SCSI Compliance tests expect a null terminator
there, so let's include it.
Change-Id: I18fa35295233a163cea711a5c4ff8e3d3e80c4f1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
A 100us is so small that applying the quirk to the specific
SSDs that require the delay is more trouble than it is worth.
So remove the quirk and always wait 100us before re-enabling
the NVMe SSD during initialization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id6a8cc6e35d103fffdf135580301fc3e5b27e722
Also avoid an spdk_get_ticks() call in the default
case where a timeout_cb_fn is not defined.
On my Intel(R) Xeon(R) E5-2699 v3 system with an
Intel(R) P3700 SSD, these modifications reduce software
overhead per I/O by 3-5% (as measured by the SPDK
overhead tool).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5bb5a87747b15d9e27655fabcd2bc1a40b0b990e
Remove the "Nvme" from several field names. The parser
will still accept the old name for backward compatibility.
Change-Id: I6fa86ec359b23fb63960d0aa479a845b36a0977a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The user can now not only specify an optional timeout for
commands, but also the action to take when a timeout is
detected.
Change-Id: I7d7cdd846d580e0b3a5f733d398ee9b19d6fe034
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Queue aborts that would exceed the abort command limit
in software as a convenience for the user.
Change-Id: I8c1f0380984cc6c0cdb453db961939a7f571b336
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Instead, pass NULL when an ADMIN command times out.
We don't expose the admin queue to the user.
Change-Id: If0768d329a689f6f7c3734c9d419e680d7378ed1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
For each command that times out, call the timeout
callback one time if the user registered one.
Change-Id: Iaad39a886468e89bef63fe292c5cad1dce97a57c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Instead, they register some internal structure of
their choosing.
Change-Id: Id1f8c563d0a2c6f1066d741f86b8aa6fe09b6319
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Some calls were passing bdev->ctxt, some calls just
bdev. In most of our implementations those are the
same pointer, but they aren't necessarily.
Change-Id: If2d19f9eef059aded10a917ffb270c1dc4a8dc41
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The DPDK mask and the reactor mask are always the same.
Change-Id: I83d3ab87cdfb405574f6472cfc222d3f311abdb1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Changed spdk_iscsi_portal_grp_create_from_portal_list so that it fails
if any given portal is invalid.
Change-Id: I708621a538a52abfed4dce01668d26602a5ada59
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
It has been discovered that some devices require
a very small delay before writing CC.EN to 1 after
CSTS.RDY goes to 0.
Change-Id: I73d31726d17ebf5bbec7ee528e2f98fcd05234dd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This isn't the indentation pattern I would have chosen, but
it's a complicated negotiation between what I want and what
astyle will let me get away with.
Change-Id: I4909587823931842ac3f227134e1d05e7d80da74
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
