We should use `ns->registrants` to count the number of registered
controllers(REGCTL) for Reservation Report command, as `subsystem->ctrlrs`
only list current active sessions(controllers).
Also use the output data buffer directly so that we don't need to calloc/free
during the process of Reservation Report command.
Fix#1928
Change-Id: I650224b751a08416208b8a504b82debff31e92fd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7822
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Some systems may have page size other than 4096 bytes
Change-Id: Id56bb1566fff480edbe1a293121fc7a68c74252a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
This is needed before we can start looking up attributes
of the block subsystem under sysfs. In some occasions they
may simply not exist yet at a given time.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I4261d17e92e02acec31b8affaccd0aa11c2b851e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7863
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This makes use of newly added spdk_bdev_wait_for_examine(),
to only respond to RPC when bdev was fully examined.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If82cd913ab6653e8cc0da38c639b384b6c0303ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5482
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Runtime RPCs such as bdev creation has no chance to wait for
bdev examination to finish. To handle this case commit below
introduced bdev_wait_for_examine RPC, and built it into all newly
saved JSON configurations:
(e57bb1af)lib/bdev: build bdev_wait_for_examine into subsystem
Some tests generate the configuration by hand, rather than
saving it from an existing application.
This patch embeds this RPC into the test configs.
Fixes#1760
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I79f998d722a2d19aa98b78333c64dbd2c1151444
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7861
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Function initiator_json_config is never called with
additional arguments that would fill up the subsystem
JSON.
Handling for the comma is removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6ce5648a0eac29cb0f45d210696edf7977dfe89d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7860
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This makes use of newly added spdk_bdev_wait_for_examine(),
to only respond to RPC when bdev was fully examined.
Fixes#1760
Issue above was triggered in DD tests where application
finished before the examine had a chance to fully finish.
This patch addresses it by making sure that nvme attach
RPC waits for completion of the examine.
Later patch in series adds the bdev_wait_for_examine RPC
to multiple static configuration files. Making sure similar
issues do no occur for bdev modules which do not have changes
in their RPC as here.
The issue does not occur for JSON configs generated from apps,
see patch:
(e57bb1af)lib/bdev: build bdev_wait_for_examine into subsystem
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie3ca2933af97a40ae01ecc3eefe2161d2d34c602
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5483
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Use spdk_thread_get_last_tsc() and spdk_thread_get_stats() in
unit tests for reactor. As a result, we can change one inclusion
from spdk_internal/thread.h to spdk/thread.h.
This is the same effort as spdk_poller.
The following patches will move the definition of struct spdk_thread and
enum spdk_thread_state from include/spdk_internal/thread.h to
lib/thread/thread.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I24d4a52ecf885b6e7db749616ee1f95b82574dc5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is the same effort as spdk_poller.
The following patches will move the definition of struct spdk_thread and
enum spdk_thread_state from include/spdk_internal/thread.h to
lib/thread/thread.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7f7bdfdd7a7b1b834d16d79638a4fd2d63e9daf6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7800
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Most accesses to the struct spdk_poller outside lib/thread have been
done via functions but a few direct accesses remain.
Change these to indirect accesses by addinng a few helper functions
as SPDK internal APIs.
Add spdk_poller_get_name() to get the name of the poller.
Remove spdk_poller_state_str() and add spdk_poller_get_state_str().
Exposing enum spdk_poller_state outside lib/thread is not really
necessary.
This removal requires us to update major SO version.
Add spdk_poller_get_period_ticks() to get the period ticks of the
poller.
Add struct spdk_poller_stats and spdk_poller_get_stats() to get
the stats of the poller.
The next patch will move the definition of struct spdk_poller and
enum spdk_poller_state from include/spdk_internal/thread.h to
lib/thread/thread.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id597dae074a15fcd8af09fd9d416a22ce2f403c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7798
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It is better if the internal of poller or thread is not accessed
outside lib/thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I80d488a111fd9a67a0da32d1e63695ce5a6bcb4c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7776
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The following patches will update the cache to the closest timed
poller when removing it from the list. To do it easier, factor out
the operation to remove a timed poller from timed_pollers list into
a helper function.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I25016d86117b240a2651d1f06e23bea0342211f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7719
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we introduce red black tree for timed pollers, we will not use
RB_FOREACH_SAFE() but cache the leftmost (smallest) node and iterate
from it via RB_NEXT() instead.
As another preparation, separate TAILQ_FOREACH_SAFE() into TAILQ_FIRST()
and TAILQ_NEXT().
The next patch will cache the first element to thread and refer it
first.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie03c387b5b3a055c668e7b439a5eb05ed77eaa81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7718
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It will be sufficiently reasonable to check if the caller thread is valid
even if spdk_poller_pause() or spdk_poller_resume() does nothing.
Besides, let's write all possibles states explicitly in switch - cases.
This refactoring clarifies the logic and makes the following patches easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1163eff388fe741d6b6924f474a82b1aa7d18acb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7665
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change if - else if - else blocks of thread_execute_poller() and
thread_execute_timed_poller() to switch - cases blocks and specify
possible states explicitly in these switch - cases blocks.
The code will be simpler and clarified, and then the following patches
will be easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2e283894f5d69e1bd67466ae070c5b8bb9014616
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7664
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There will be no issue even if time poller is unregistered or paused
after it is expired. The iteration is stopped anyway after the head poller
is found not to be expired.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2b394b8b517930a6630dd31f59fcaea12eb80572
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7662
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The following patches will introduce red black tree to manage
timed pollers efficiently but it will be based on macros available only
in lib/thread/thread.c. Hence then it will be difficult to expose the
internal of timed pollers tree outside the file. On the other hand,
we do not want to include JSON into the file.
Hence add a few SPDK internal APIs to iterate pollers list transparently.
For spdk_thread_get_next_active/timed/pause_poller(), we omit the parameter
thread and get it internally from poller->thread even if the names include
the term "thread". This will be slightly cleaner.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I000801a2e4dc42fa79801a2fd6f2b06e1b769c88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7717
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add {min,max}_cntlid to spdk_nvmf_subsystem, defaulting to 1 and
0xFFEF, respectively, and add nvmf_subsystem_set_cntlid_range() to
allow the controller range to be configured in the range [min_cntlid,
max_cntlid].
Also add {min,max}_cntlid to the nvmf_create_subsystem RPC to allow
the controller ID range to be specified when creating an nvmf
subsystem.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I936db3bb0c9a38569063a6fd3c11df262dfad776
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7322
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Change zone append print to SPDK_DEBUGLOG() instead of an unconditional
print. Since we already print a warning when zone append isn't supported,
there is no need to unconditionally print something for the success case.
This also matches the behavior of the SPDK fio bdev plugin.
Also improve the zone append help text to match the SPDK fio bdev plugin.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ic7604ea4bdf17e0cddfe2638f3db7944ee652474
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7804
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Update README.md with information specific to zoned block devices.
Additionally, add an example config that can be used to test the
--zonemode=zbd fio option using the virtual zoned block device
SPDK module on top of a Malloc bdev.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I68bbc07ab70ad1ce8e38abc91dd8c15c49f90656
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7758
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add support for using zone append commands instead of write command,
for bdevs that support it.
In the SPDK NVMe plugin, the target struct (called spdk_fio_qpair) is
allocated in .setup(), but the qpair is first created in .open_file.
In the SPDK bdev plugin, the target struct (called spdk_fio_target)
is allocated in spdk_fio_bdev_open(). This function also creates the
I/O channel. (spdk_fio_bdev_open() is called by .init().)
Since certain options has to be saved in the struct spdk_fio_target,
which is allocated quite late, we cannot reuse spdk_fio_handle_options(),
which has to be called before threads are created.
Therefore, we unfortunately need another option parsing function in the
SPDK bdev plugin.
If we fail to handle any of the per target options, the target is never
added to the list of targets, and is freed immediately.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Iacd1924c8f0d3d324f2a6f1b0a54f86459f39d31
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7727
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is design to use the single Rados Cluster
object in the same RBD if there are multiple I/O channels created.
And this patch will be prepared for the next patch to share
the same cluster among different RBD bdevs.
Change-Id: I1509f29a9c1088da308a3f88980f0c7fed26476f
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7601
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When testing vfio-user target with QEMU, there is following error log:
ctrlr.c:2143:31: runtime error: member access within misaligned address 0x7fe526a73d98 for type 'struct spdk_nvme_ctrlr_data', which requires 16 byte alignment
For vfio-user transport, the memory buffer is allocated by clients, so
we can't assume the memory is always aligned, just remove the
aligned attribute.
Change-Id: Ie80530415013ebd7bcb8cdabca97d7d0e34857f9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7797
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It's only for tcp now, but the transport here is rdma. So there is no need to assert.
Signed-off-by: ChengqiangMeng <chengqiangx.meng@intel.com>
Change-Id: Ieffaac9d31a8f9c79a0d9fd226d74268986b7a77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7823
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
With https://review.spdk.io/gerrit/c/spdk/spdk/+/7684 there are no
more active uses of it in the test suites.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If6f8227b68f1fe1a4038cec2b6107eac82ad44de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7698
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
fio.py simply wraps itself around fio and doesn't do anything that
would require python to be in use. Having it in a simple bash form
makes it easier to integrate it with autotest's common sh tooling
and to debug any potential issues with the underlying tests.
This also fixes#1919 by making sure only proper nvme devices are
selected for the nvmf targets.
Fixes: #1919.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I111d00df3c7b2517f431cae865e258a665c2ecb3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7684
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This update will stop using `struct vfio_device_info` from
<linux/vfio.h>.
Fix issue #1922.
Change-Id: Ia7ad745db8d7ed8f5248ca13e3188ebd540b0e40
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7831
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Look for 'vfio_user' in SPDK_LIB_FILES to determine
whether the target application actually needs to be
rebuilt.
Fixes issue #1930.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If3f699c91972e20dc4520e25c655ed11f6843be0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7826
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
At least on some Ubuntu distributions, default
vfio-user install puts libs in usr/local/lib instead
of usr/local/lib64.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib312d8ca9b4ce9e858a9a9e76525fc8afd48ced5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7825
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <dongx.yi@intel.com>
This helps in next patch in series where multiple
completions will be executing.
UT is adjusted since one additional poll is required.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id72377ddef91e40cdbc2bdea6f33c23309b0ca3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
During snapshot creation the original blob becomes
a thin provisioned blob that will only the diff of data after
snapshot creation.
Despite the comment in the UT the number of polls before issuing
blob write was hitting blob BEFORE it swapped with new one.
Issuing I/O during this period shall check for io freeze
before checking cluster allocation.
Otherwise bs_io_unit_is_allocated() hits assert for thin
provisioned blob. This is because cluster map of blob is
empty, but properties have not been updated yet.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I742e1a50b14d456ae1e6de13b5111caec3e8322c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7641
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also for the purpose to avoid a burst of children unmap request,
we will submit at most up to 8 children request at a time for
a big UNMAP command.
Change-Id: Iaf0f18b07517e0a8f84dc04e8c93b95691a1a43c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7518
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Both UNMAP and R/W will share the some logic to process the submission,
so combine them to a helper function first.
Change-Id: Ia4f234c6a58f078d3e9f88cacaf1510a17f07acc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7606
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The changes in the nvmf_create_transport show
how this command parser work. And there have
two benefit for this changed.
1. Simplify the definition of rpc method. no need add
so many args anymore. Also it retains its original
functions, so we can also check the input args.
2. Make the rpc call more versatile, for example.
when user extend the subparsers(add new args
into subparsers), they can pass some private args
into the rpc method by command parser.
Signed-off-by: jiaqizho <jiaqi.zhou@intel.com>
Change-Id: Iaf916e3454f23715cf9216794bb80c65b2b4603f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6652
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Addressing review comment from 6cebe9d0.
Minor optimisation to cache result of spdk_u32log2() into local variable
instead of calling it multiple times.
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I2fd6afd1e3ee461662de3f9d278958664224e106
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7806
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
ctrlr_discovery.c doesn't need this #include.
Including it causes bdev_module.h types to be
emitted to the debug symbols at least with some
compilers, which can result in unwanted abidiff
errors.
The unit tests do need it, so just include it
there instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad28f9778ce08b11b52325658583ae9032295f3a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7813
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The library itself doesn't need it. The unit tests
do need it, so just include it there.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9aefd303ae12928d45141029436509f185105bd3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7812
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This module only requires the spdk_bdev_module
APIs, so use this #define to avoid having to
bump so version when spdk_bdev is modified.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I292c38e60cbf21d0d5a6583cb2a2b097c524f3d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7811
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
- Use consistent cache line size units in KiB across RPC calls
and config files. The KiB units are much easier to use then
the bytes units and are more human readable.
- Properly handle cache start when cache line size is incorrect.
- Add test to check if cache line size value is reported correctly.
- Add cache line size info to JSON RPC documentation.
Fixes#1858
Signed-off-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Change-Id: Iec9ede85f6884b64605d2d112947b3f175cbd938
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7614
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Older version wasn't providing full support for PMR setup, this one
does.
Rewrite get-pmr such that it supports CMB/PMR sizes greater than 4GB.
Also, since CMB and PMR can coexist in newer versions of qemu try to
detect both under single device.
E.g.:
nvme0:0000:00:04.0:64-bit:prefetchable:0x700000000:0x707ffffff:0x08000000:cmb
nvme0:0000:00:04.0:64-bit:prefetchable:0x400000000:0x5ffffffff:0x200000000:pmr
nvme1:0000:00:05.0:64-bit:prefetchable:0x708000000:0x70fffffff:0x08000000:cmb
nvme2:0000:00:06.0:64-bit:prefetchable:0x600000000:0x6ffffffff:0x100000000:cmb
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ic159f5c12d3ef39db77617f7d64f825356c255a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
