Gives the ability to change behavior of restore after dirty shutdown
without recompiling ftl library. User can define if partial recovery
or error should be returned after such a scenario.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I6dda40df7b92d6a377957e4a70a3eab91a6ac4a9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456185
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Improve handling of partial IOs for case when iovcnt == 1.
This case is pretty frqeuent because all data allocated by OCF
have iovcnt == 1 (see ctx->data->alloc() or vbdev_ocf_ctx_data_alloc())
Change-Id: I8d38ca9e9d2bd3e6ce298bf788ce6ed782b56594
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch fixes submission of partial IOs in bottom adapter
Existing check (if offset > 0) was not sufficient to detect partial IOs
because there could be an IO with offset = 0 but length < total size of iovs.
This patch changes the check, but also free operation on completion
because now the old free does not cover all situations when we allocate iovs.
`Partial IOs` are the IOs handled by bottom adapter
which specify only part of the internal iovs vector.
So their length is less that the length of internal iovs vector.
They exist because sometimes parts of single IO from top adapter
need to be sent to different locations.
Also, in general, IOs initiated by OCF (such as cleaner IOs) are represented
as single big iov that is submitted by parts in form of 'Partial IOs'.
Change-Id: I8ae47659fb34904c593a696d74d683a418ac9962
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Implement metadata probe functionality to load cache state
from disk.
During metadata probe, we inspect UUIDs of core devices
and create vbdev configurations based on them.
Then, to start vbdev, we use load path (loadq = true).
After this change persistent metadata is officially supported,
we can save and restore cache state from persistant storage.
WriteBack mode is now safe to use in respect to unexpected shutdowns,
because all information about dirty data is also restored during cache load.
Change-Id: I6cf86aabd68177b88638a68ea6a5b78a1068a4d0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455417
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch updates submodule and appropriate functions.
Cleaner poller is now registered only when needed.
Change-Id: Ic4ca7ce6f77b71ac12c19462f62ae7cd96c59006
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455408
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
iSCSI application may set the data iovec to NULL for READ requests.
Change-Id: Ic6b73f62f75dc2d927c18219fa1c2cb242f0528e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
DPDK rte_ring_enqueue_bulk() has free_space parameter to return
the amount of space in the ring after enqueue operation has finished.
This parameter can be used to wait when the ring is almost full and
wake up when there is enough space available in the ring.
Hence we add free_space to spdk_ring_enqueue() and spdk_ring_enqueue()
passes it to rte_ring_enqueue_bulk() simply.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9b9d6a5a097cf6dc4b97dfda7442f2c4b0aed4d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The function spdk_bdev_io_get_io_channel() was added,
but remained unused. Couple places done the exact same thing,
so now they just use it directly.
Change-Id: Ifa332ce3a489256ccf2f5d0dd9c74a3215c544ce
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function spdk_bdev_io_get_thread() was added,
but remained unused. Couple places done the exact same thing,
so now they just use it directly.
Change-Id: Ia25abf57eb88c8df47c83e4edd761a9e02cc1618
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456436
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Handle IOs with metadata being transferred in a separate buffer if the
device underneath supports it.
Change-Id: I38887a24d2aad51f674a840367b5dcdeda2d5a8b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds *_with_md family of functions allowing for IO with
metadata being transferred in a separate buffer.
Change-Id: I842d5a00a532cf5d0b0f0738535ea46903674140
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451465
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Existing code in spdk_bdev_write_zeroes_blocks() will call spdk_bdev_free_io()
for the error case, which will cause assertion because the bdev_io isn't
submitted to the backend yet, so we will check the condtion first to
avoid the error case.
Change-Id: If27d78217f709a3315e74c00869d345abd6b9a69
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This module simply sits on another virtual bdev
and adds a simulated average and p99 latency to that drive.
Change-Id: Ie9fc91e27585fd0636cb7dc845cb41744bf24625
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
QAT driver will not load with anything less than 128, may need to
adjust after performance testing.
Change-Id: I4949e6d97e7ed997d14b907dac00cc288dcc331b
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456069
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
mbufs are freed with a single call to the first mbuf in the chain
unless we hit an error before we chain them. So free them correctly
when chained and loop through the array one at a time and free them
that way if not.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I80ebb86bc2147b42db89d24f8e985cacf7d4bceb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455019
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move actual submission code to _spdk_bdev_io_do_submit, used by
both normal submission path and QoS path.
Previous patch(review.gerrithub.io/c/442127) adds the missing
bdev_io->internal.in_submit_request flag to QoS submission path.
But QoS submission path doesn't handle nomem_io yet.
This patch makes QoS submission path handle nomem_io in the same way
as the normal path and extracts actual submission code into do_submit
function, so that further modification of the submission logic will
apply to both paths automatically.
Change-Id: I41fa88d239c3a2bd9783d812826e32e7c887818d
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455252
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Interpret volume->open() options as our vbdev_ocf_base struct.
This is used during metadata probe procedure, when there is no
vbdev configurations created, so we need to pass base structure
as option.
This patch is a prepartion for persistant metadata support,
and it does not change current behavior.
Change-Id: I0b7435df1692d8b3028931c6c9fc50d2d84b2557
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Use OCF per-volume UUID field to serialize bdev names.
This is going to be used during cache load to find out
which bdevs we want to attach.
Note that there is in fact "user_metadata" buffor that is
also stored in cache metadata, but we cannot use it
because its size is limited to 64 bytes.
UUID in OCF terms is not standarized
and is meant to be used to store custom immutable data.
This change preparation for persistent metadata support.
Functionality is not changed. (everything works the same way)
Change-Id: Ia9204fae29106f5b816d93a6771425a223d6c028
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455414
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change shutdown behavior such that now first bdev destruct() call
stops OCF cache instance.
Previusly, cache was stopped when single vbdev was referencing it.
This patch is related to persistent metadata support.
Without this change, every time a SPDK application is stopped,
only the last core is remembered in metadata,
because vbdevs detach by 1 by 1, each time updating the metadata.
Change-Id: I57db3f77db525177c024ee85e660a85aff2f8c31
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Fix instance function for OCF ctx interface.
This function is used for persistent metadata only.
Change-Id: I9583ea8eb21f07a3e9072a9552bed1c077cb7114
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Make init_vbdev() accept NULL as cache_mode if loadq flag
is set.
This is needed for load path because we don't know cache mode
before the actual load (happens later).
This change is related to persistant metadata support.
This patch does not change current behavior because loadq flag
is always false.
Change-Id: I42727eb841d87903c81bd5e6d51b6d4869ed9be3
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455411
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Implement load path for OCF cache.
During load OCF will read metadata from cache disk and restore its state.
management_channel initialization is moved before cache load/attach part
because ocf_mngt_cache_load() needs it to read metadata.
This patch is a preparation for persistant metadata support.
Load path is never used yet because loadq flag is always false.
Change-Id: Iff6c1c52eae7b9f52812a8bd3d5ae6d6facedd60
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455410
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add new loadq flag that indicates if vbdev
should load cache instance from disk or start a new one.
This change is a preparation for persistent metadata support.
Functionality is not changed in this patch as the loadq flag is always false.
Change-Id: I1baac7f988e6eeadb4f365ba7bfab8019d55a753
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455409
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Do management flush during OCF shutdown to write all dirty requests to cores.
Dirty requests are relevant to WriteBack mode only.
Change-Id: I778a73ed8ab5659921f192f638027d513c239814
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450683
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Implement cleaner that is used in WriteBack mode.
Cleaner is a background agent that does synchronization
of data between cache and its cores.
Cleaner usually runs every ~20 seconds to perform cleaning.
The synchronization is a simmilar operation to OCF management flushes.
We need cleaner for WriteBack because only WriteBack mode
produces dirty data that cleaner needs to deal with.
Cleaner requires adopting trylock() because in current version
cleaner uses management lock when performs cleaning,
which may lead to deadlocks if cleaner runs on
the same thread as management operations.
WriteBack mode is fully functional after this change,
but persistent metadata support is required to use it for production.
Cleaner will run on management thread for now.
We plan to implement functionality of
chosing a CPU core where cleaner should run.
Cleaning policy is not configurable yet.
The default is ALRU with 20 sec interval.
Change-Id: I35aa7e00c44e0d7a77e64e60df1f66f20be03f55
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Create new management channel and handle sharing between vbdevs.
This channel is going to be used for management operations
that produce IOs (such as flush) and also for cleaner.
Change-Id: Ieeed8454a7ab7459c86ac06ec6c0ece038bc928e
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455272
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Implement management queue for asynchronous management that is provided
in new OCF API. This is a neccessery step to be able to implement
metadata support.
OCF submodule was updated to get management queue functionality
It has to be done in this patch because OCF module will not work
otherwise.
Change-Id: Id19c2e5bd6a5d26fee41752b62720e408dc082e8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448619
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
OCF queue list needs to be managed synchronously.
This patch uses our own mutex to achieve that because we cannot rely on
ocf_mngt_cache_lock() as it may produce deadlocks when using
cleaner.
Alternative way would be to use trylock, but
we need to register a poller for it and do locking concurently
which doesn't seem to be possible in callbacks of io channel.
We agreed with OCF team that we are going to change this part
when OCF will deliver safe ocf_mngt_cache_lock() function.
This patch fixes a very rare failure on our CI that looked like this:
```
04:33:02 vbdev_ocf.c: 134:stop_vbdev: *NOTICE*: Not stopping cache instance 'Malloc0' because it is referenced by other OCF bdev
04:33:03 MalCache1: Core core2 successfully removed
04:33:03 MalCache1: Stopping cache
04:33:03 MalCache1: Done saving cache state!
04:33:03 src/ocf/mngt/ocf_mngt_cache.c:1576:2: runtime error: pointer index expression with base 0x000000000000 overflowed to 0xffffffffffffffa8
04:33:03 #0 0x7f3c52d54c26 in _ocf_mngt_cache_stop src/ocf/mngt/ocf_mngt_cache.c:1576
04:33:03 #1 0x7f3c52d5579f in ocf_mngt_cache_stop src/ocf/mngt/ocf_mngt_cache.c:1657
04:33:03 #2 0x7f3c52cbe9f4 in stop_vbdev /var/jenkins/workspace/NVMe_tests/nvme_phy_autotest/spdk/lib/bdev/ocf/vbdev_ocf.c:147
04:33:03 #3 0x7f3c52cbf4a0 in vbdev_ocf_destruct /var/jenkins/workspace/NVMe_tests/nvme_phy_autotest/spdk/lib/bdev/ocf/vbdev_ocf.c:216
```
Change-Id: Id6fafb444958f3becdc480e44762074c6c081e1f
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450682
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Introduce cache context structure that is going to be used
for sharing per cache info. For example: management queue,
cleaner_channel, cleaner_thread.
Lifetime of this structure ends with last vbdev that gets unregistered
and NOT when cache stops because cache does not have to be freed
there.
Change-Id: I66252084d7efda92edd10fb737c8e9c8169b4f6d
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451403
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Adapt to new async API which was changed recently
This is a neccessery step to be able to implement persistent metadata support
OCF submodule was updated to get new API
Change-Id: I6bf9941ab0557981235c5be27686594a1b8ac3a0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448397
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Move last step of register chain to the top because it is arguably more readable.
This should not be done in previus patch because it spoils the gerrithub diff.
Change-Id: If51642a32c5cf2a757ca20485d2347410653ca2a
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Use new trylock API to prevent lockups when using OCF cleaner.
Starting and stoping OCF bdev becomes asynchronous with this patch.
Using trylock means that we have to poll function that does locking each
time we want to initiate some operation on cache instance.
This is the reason why management functions become asynchronous.
Each management operation now has a _poll() operation associated with it.
_poll() uses trylock and continues when cache is locked.
Change-Id: I83b9fbe87c27433e178583411b87a68b8efaf58e
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447888
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch is a preparation for adopting ocf_cache_trylock() function.
Register OCF bdev path uses vbdev_ocf_mngt_ interface now
Register stays synchronous blocking operation in this patch,
but with adoption of ocf_cache_trylock() function,
register will be asynchronous, in which case we
want to use mngt_ interface.
This series of OCF patches will enable WriteBack support for OCF bdev.
There is a lot of preparation before we will be able
to actually implement WriteBack.
Dependencies look like this:
- WriteBack
- Cleaner
- trylock
- Persistent metadata
- asynchronous management API
Cleaner is a background agent that does synchronization
of data between cache and its cores.
Cleaner usually runs every ~30 seconds to perform cleaning.
The synchronization is a simmilar operation to OCF management flushes.
We need cleaner for WriteBack because only WriteBack mode
produces dirty data that cleaner needs to deal with.
Cleaner requires adopting trylock() because in current version
cleaner uses management lock when performs cleaning,
which may lead to deadlocks if cleaner runs on
the same thread as management operations.
Peristent metadata is functionality of OCF
that allows to restore cache state after shutdown
We need persistent metadata in context of shutdown
with some data being dirty which may only happen
when using WriteBack mode
Support for persistent metadata requieres
asynchronous OCF API because in current version
we will have a deadlock during metadata initialization
because it is required to be done on different thread
than cache initialization.
Change-Id: I45d84a5fa0c96581d522050dad186b06d489226e
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455225
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we create AIO using the RPC interface, we can use the error
message to return to determine what exceptions have occurred.
Change-Id: I537f1a7d1053dcc27960de004fd0b4aea49919e9
Signed-off-by: Tianyu yang <yangtianyu2@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452313
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Submission logic was incorrect and completion logic was not
present yet. This passes now with multi-thread bdevio test.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia8ed1c123be511240d93503a2c5e501ccad445bf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Adding these tests identified a small fix in the code under test
that is also included here. The compressdev 'produced' field
is unsigned and reduce is expecting a negative errno in the
callback.
Change-Id: I28ab11ee3ef54768a9d6ccd26282cf7dd022be43
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454806
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Two quick updates, support dequeueing more than 1 IO at a time which
is now more likely given that we can queue up compression operations
(others can come in qhile one is on the queue).
Dropped the max inflight value as it was in there as a palceholder
and now it makes sense to give it a sane value. Also updated the value
passed to reduce to signal an error.
UT for the poller will come in the next patch...
Change-Id: I14d6aeb98aa1e193c498e1549e37eca0e4c56c31
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454680
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When parent IO was splitted into several children requests, SPDK
may return parent completion callback with error status before
all the children requests are finished.
Change-Id: I63221a0ae1a5925a7fcd9744b4f5d8079c641252
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453611
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Had 0 hardcoded early on, this just uses the queue pair that
was pre-assigned to the compression bdev to use when interacting
with the cryptodev API.
Multi-threaded testing is coming later.
Change-Id: Iab8ea4e59169980933e9c81715baf4d41803b572
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The compressdev enqueue call will return the number of ops that
it was able to accept. By design this will always be 1 for our
implementation so check that to make sure.
If it is 0 then we queue the compression operation up and try
again after something is dequeued in the poller.
We will also queue if we can't get an mbuf or op from our pools.
Change-Id: I7285749b4a599d1ee265e3c3e16073f25c4d7469
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These two paths do the same thing, only spdk_bdev_io_get_buf tries to
allocate the buffer directly, while spdk_bdev_io_put_buf reuses the
returned buffer for one of the waiting requests.
Change-Id: I341a011f3a16a99de399c8b56fa73ccd9c7fe4fa
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add uninstall target to makefiles to be able to perform
reverse of install target.
Fixes#464
This patch adds 'uninstall' target to makefile.
'make uninstall' will remove spdk_tgt app, headers, libraries
and shared libraries from system directories defined by $DESTDIR.
Additionaly, if there will be any empty directories left after
this operation, they will be removed as well.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I7b07fb4b81081d3914ff09165991fbe3a26b9067
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously whenever bdev module went through init>fini>init,
the async modules would trigger assert in spdk_bdev_module_action_done().
This was because starting value for action_in_progress was being
set only once - during registration of the modules.
With this change, modules are set as async just before their init start.
Change-Id: If177a8dc97812b1b264cb61d5ad202ce47fca3b5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Allow user to set timeout for poller in management operations.
Now also all management pollers have 5 sec default timeout.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: Ic75f2b150ef21ccd673b80aa84f16c9a24f90e32
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add stop function to management interface.
It is needed for error handling when execution has to be aborted early.
Example flow:
```
rc = op();
if (rc) {
handle();
vbdev_ocf_mngt_stop();
} else {
vbdev_ocf_mngt_continue();
}
```
This can be improved in the future, because currently, error
handling cannot be a management operation on its own (but should be).
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: I9ba528db8a9957ee561e5c1b5528b16bd143d5d8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453654
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Replace remove_base() function by smaller ones:
detach_cache(), remove_cache_bdev(),
detach_core(), remove_core_bdev()
This change is necessary for implementing asynchronous unregister using
trylock API.
Also introduce stop status variable because unregister path has changed.
Change-Id: I62599cafacdba685848bd7d32d3d5245907ee4a1
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reorder function for register and unregister path to make code more
readable.
Change-Id: I3479b231de1f6a4f84f9538f345e62eb73e6847c
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452415
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
stop_vbdev() is management a function so it should be one of the steps
of unregister_path[]. It will have to be when stoping is asynchronous,
but right now it is not a hard requirement.
remove_base() no longer calls stop_vbdev() because that was actually a
dead code.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: Ie2d87da0fbe7807efea084181ea386b323e6b9d8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453653
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is just for readability.
Change-Id: Ic2a62ded78146c5b8736b6b7daebda1f3d5e3c47
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some data is freed but is cleared to zero just before the free.
They are not necessary and can be removed.
Change-Id: Ia4d789ef77c22059c412ee3c974ab0cf068d6c67
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In prep for next patch where queueing a comp op requires
the poller to call a func that was previously below it.
Change-Id: I0ba8a00e958e0766f866a0cd49d7b288ea4cbe73
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453029
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In working on a future patch to queue compress operations, I found
some corruptions in our mbuf pool stemming from an inconsistency
in using mbuf macros when constructing a compress operation and
how we allocated and freed both the pool and the mbufs.
This also fixes an issue that I hadn't addressed yet with freeing
chained mbufs. Use of the mbuf macro to free them instead of the
generic spdk functions takes care of that for us.
Change-Id: I7b29a0d740ab745574698c721d575d8a735ad5cb
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453028
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
I didn't test delete after making a bunch of channel changes so there
were some bugs in that path. Also as a drive-by I NULL out the
base_desc in vbdev_reduce_load_cb() to be consistent with other places
where I'm closing the base desc.
Change-Id: Iddd5dc704cde8eb7a6a5a3a8481e064a5c6c6d4e
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452267
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
On init, we pass reducelib the address of our params structure
so that the volume size is updated accordingly. On load however,
there was nothing to set the volume size so any load of a previously
created compress volume would result in a 0 length bdev.
Change-Id: I7643c79fa2e664115fd25df064ff1c74d82e358b
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make examine work with asynchronous bdev startup.
We need to count references of bdevs that are being examined,
for the case when single cache bdev is referenced by multiple OCF
vbdevs.
The construct function is not in fact asynchronous yet,
but will be after adopting "trylock" API. Adopting trylock
requires a lot of changes, so this patch is really to split
implementation.
Change-Id: I6ac091f2dd48462e74aa89cf54acb0306c30673b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450033
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Traditionally, The C function name of rpc method "method_name" will be
"spdk_rpc_method_name", so make these function names consistent with
others. No behaviours changed.
Change-Id: Iac5396d4860bdbd78cba9031b4b6358161ec779b
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453197
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is the end of the patch series.
Make destroy_raid_bdev RPC Wait for completion of spdk_bdev_unregister
to the raid bdev by using callback function.
Change-Id: I3ed157ee71e3b8e6dc14b5b66732baba516eacce
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450573
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We have to process only the first call of destroy_raid_bdev RPC
for the same RAID bdev.
The existing flag destruct_called cannot be used for that purpose
because of the following reason.
destruct_called is set to true in both of
- destroy_raid_bdev RPC
- hot removal of any base bdev.
If destruct_called is set in destroy_raid_bdev RPC, destroy_raid_bdev
RPC must return immediately, but if destruct_called is set in hot
removal of any base bdev, destroy_raid_bdev RPC must go forward
with the current logic.
Hence add another flag destroy_started to struct raid_bdev and
use it.
Change-Id: Ifeefcaa1d289499342d8bb9bc162ded65e0368dd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450885
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Typically we just pass the bdevs supported IO types
for each of its partitions. But that doesn't work
for partitions with non-zero offsets since we can't
decode/modify the NVMe command in the bdev layer
to account for that offset. So just don't allow it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I38a766fcc39d5f068b31245bf1a47dbb79c8f8dd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452930
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This was bdev-specific code that has been made generic
but we missed removing this "split" name when moving
the code.
We don't need a name here really - SPDK_ERRLOG will
tell us the file and line number of the error which is
sufficient.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d19b947c48407bfd99058b78325108c2957b391
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452929
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The product_name for raid bdevs was "Pooled Device" which was a legacy
naming convention that hadn't been cleaned up yet. This changes the
naming to be up to date with the current naming scheme.
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Change-Id: I9092a2b793e48bb9ec0349087a31fdcde17ed9cd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was not used by any of the trace register descriptions.
Let's remove it rather keeping it around if we don't need it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idda809e2911db5be555ff6aa13695484a14bf665
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
FTL doesn't have any kind of special package requirements.
It is getting pretty good traction in the community, so
let's enable it by default.
Note that we will disable FTL on FreeBSD. FTL uses
CIRCLEQ which is not available on FreeBSD. Let's not
spend time trying to get FTL to work on FreeBSD until
there's a demand to do so.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I15525b6c4e6ee52f49adf74d55f9484fe08a6dcc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Also remove an unnecessary empty line and fix typos
Change-Id: I54e63e39dda23063c3fcbdd709cafec4278b130a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Mempools are based off of a ring structure which allocates its elements
as a power of two. It also only exposes n-1 elements to the user. So
when we create a mempool with 2^n elements in it, we have to allocate a
ring with 2^n+1 entries. By decreasing the number of elements in these
key mempools by 1, we can save a decent amount of memory.
Change-Id: I942c9dd4cf59096969bc2559fb46fd2084a07f09
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add callback for construct function.
It is not asynchronous yet, but will be after
adopting asynchronous OCF API
Also adopt RPC construct call for this change.
This is done in this patch because (1) change is small (2) leaving
implementation as TODO still requires implementing a mock because we
decided that callback should be required rather than optional.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: Ib6a78e2caf34ac057d4da53ad5dda47163e8a089
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add vbdev as another argument in callback of vbdev management operations.
This is nice for async version of vbdev_ocf_construct() which uses mngt_
interface and creates vbdev structure.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: I8c88e0a881855b9f22fcf1f8174c888f3cfd6828
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452145
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We decided to name compress bdevs with COMP_ and then the name of
the underlying bdev so the RPC parm name was stale. Previously
hardcoded the path to PM for early dev so replaced name with pm_path.
Note that a sample create looks like this now:
rpc.py construct_compress_bdev -b NVMe0n1 -p ~/pm_files -d compress_isal
And that devs need to pay attention for the pathname they provide, its
easy to leave orphaned pm files around and they can get big.
Change-Id: Ifb5245c922461bbecec4bef266bdeb25e8b87f31
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Needs to be based on the compressed vol size which is smaller
than the backing io device.
Fixes issue 763
Change-Id: I917c98e86a0755e503d5ba3d4b6c02e42f9ed709
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452158
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently, if the Bdev subsystem initialization fails, the initialization failed
module does not call the fini function cleanup resource.
However, null module use the 'spdk_io_device_register' and spdk_zmalloc to request
resources. In failed path, it will cause resource leak when exiting the app.
To avoid this, it will cleanup resources when module initialization fails.
Change-Id: Ib1a89e5238252d69b6e64ea02a0bd826661349a5
Signed-off-by: Tianyu Yang <yangtianyu2@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450105
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch won't fix issues related to the need for the latest
ipsec with 19.02 but it is needed for that patch to pass.
Change-Id: I8e2d984d85b355d88edfb9c90c159c8aa0a5362d
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451788
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For bdevs that don't support zero copy, emulate the
API using regular read and write operations.
Change-Id: Iabd7ff474bf740b096f38bd47196987cbd89e915
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/416465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a ZCOPY operation to obtain buffers that represent
data regions on the backing block device.
Change-Id: Ie941c16ee051d0009e3888b52b8f41773bba47b3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/386166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bdev descriptors could be closed only from the same thread
that opened them. This restriction was suddenly introduced
at one point without making sure all the SPDK code respects
it. Vhost can still close descriptors from any arbitrary
thread and fixing that would require some more effort.
With this patch we remove the thread-specific assert from
spdk_bdev_close() and hence allow vhost to work properly
in debug builds. Vhost can still have a possible data
race with bdev hotremove notification, but let's get rid
of the abort() from the usual code path first.
Change-Id: I6fac66a5ebc907b1c5418fff618f0b64cd9b69f4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We used to wait only for those descriptors which
specified the hotremove notification callback. The
bdev could've been removed before the descriptor
was closed and the subsequent spdk_bdev_close would
simply segfault.
This patch modifies spdk_bdev_unregister to always
wait for all descriptors to be closed before actually
unregistering the bdev. This consolidates the bdev
unregister behavior for descriptors with and without
the hotremove callback.
Change-Id: I9b358209c6abd301b6fe8660e27bc6fa4ef485d6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Here assert(nvme_bdev->id == nsid) ,there's inactive case about nvme_bdev,
that code will continue. So need to skip the same case in remove_cb.
Change-Id: Idd3bd16d32e75f6d0e448b838676eb6f2ca5cfad
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
set_bdev_qos_limit RPCs must come after the RPCs that
create its bdev.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7008745f9c56d9bc579decc7fe3c4d0d58950754
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451414
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
Newly added callback parameters are passed to spdk_bdev_unregister()
in the end. This patch adds just parameters and the next patch will
utilize them.
Change-Id: Ic239c55872c0c69f3d1625eaccdb91a32a9d4d30
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450572
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
Change-Id: Ib58b7e6d8531c84ab5e4fce7a838e409e77a0de5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450571
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
spdk_io_device_unregister should be called after spdk_bdev_unregister
because IO channel should be terminated after all open descriptors
are closed. This patch follows the practices of other bdev modules.
Change-Id: I6003edf0a6f6b2b235bf66f4b81bb0c2b855ae14
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450570
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
Move the call raid_bdev_deconfigure() to the end of the function.
This will make us to add the callback to raid_bdev_deconfigure()
and remove_base_devices().
Change-Id: Ic8ce847068f5a3682003707c87c364ed4b68e587
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450569
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
Getting raid bdev from its config and processing base bdevs by using
it throughout is much more natural.
Checking if base bdev is active can be done by checking if the pointer
to the base bdev in base_bdev_info is not NULL.
Change-Id: Idd43b13eb342d9cd21ba55943bdcd1f564b3760e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450568
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
This patch doesn't change any behavior. This patch just factors out
code into a function and move it to raid_bdev.c.
Change-Id: Ia86741ec686ffd85e4d826caf4442292963922ec
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch tries to clarify the logic of the operation to
deconfigure the corresponding raid bdev when a base bdev
is removed.
Change-Id: Id601049dfa59cd919321d833c2867f40c3ba031b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450566
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
raid_bdev_free_base_bdev_resource() has been referenced only in
bdev_raid.c.
Change-Id: I4be9ed5b7a93b950b16e57323cdf1f4bdf89841f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450565
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
raid_bdev_cleanup() has been used only in raid_bdev.c.
Change-Id: I4dcc4979eda2fd872fda23e3433b120ab6aaaad2
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450564
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Configuration lists in RAID bdev are unlikely to be exposed outside
of the RAID bdev module. Hence simply the prefix g_ will be enough
to clarify they are global data structure in RAID bdev module.
Change-Id: I9df88db8fa651d5af7d771d88ff04bb5997079c9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450563
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Idb18f7ef44634deaf63139f0f872881c9cdaefac
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_dma_malloc() is not required here, as the bdev
struct is neither DMA-able nor shared between processes.
While here, also allocate mdisk->malloc_buf using
spdk_zmalloc() instead of spdk_dma_zmalloc(), as
spdk_dma_*malloc() is about to be deprecated.
Change-Id: If835216764a565ade09180159fbbc92411b5c78f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450255
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Id49d700116bdd977893c6b89470764d97d9293bd
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unregister OCF bdev using poller that checks if
cache has pending requests.
This prevents ocf_mngt_cache_stop causing
deadlock on reads in WT mode.
Submodule commit was updated to get new function ocf_cache_has_pending_requests().
Change-Id: Iee4cb09bc2bb859a6dcce89994c686f64924c942
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add structure vbdev_ocf_mngt_ctx that is going to be used
for asynchronous management operations.
Using such context, dynamic memory allocations are no longer required
(except for one time poller registration)
This patch also adds functions to modify context in a predictable way.
They are very important for complex flow of management operations in OCF bdev
especially after whole OCF API gets changed to asynchronous.
Change-Id: Ia402d51665330a553f7f3d74000e3636f0d6a598
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449556
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I683ea366da7bb186f16a8084a9c43276ed4fce04
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449798
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This API had good intentions, but as more complicated
use cases came up where base bdevs could come and go,
we've realized that the bdev layer will need another
mechanism to query bdev modules on these types of
relationships between a virtual bdev and its base
bdevs. We removed all code related to tracking
the array of base bdevs a long time ago.
Change all existing callers to use spdk_bdev_register.
Document spdk_vbdev_register as deprecated for now,
and change its implementation to just call
spdk_bdev_register for simplicity sake.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b40ed96480c0fa7184db42953a9f4e4c167fed1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Relaunch queue poller on put_io_channel callback of OCF bdev
to delay thread shutdown. New poller will finish all pending
OCF requests as there might be some even after all SPDK IOs
completed.
This solves the issue of OCF not being able to
complete all its work because of queue poller getting
unregistered in callback of put_io_channel.
This patch also changes unregister procedure:
we call ocf_cache_stop in callback of io_device_unregister
instead of in callback of bdev_unregister.
Change-Id: Ib7e41fc25e71029a73bb76a62e39e6bf4b8189ce
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444276
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
vbdev_ocf_delete function accepts callback now.
RPC delete_ocf_bdev is also updated to adopt this change.
Change-Id: I1d357a5e37015268e28c07fd81dc35f48ec80ab8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Test functions to be added later in series
Change-Id: I96286b6214b4577df334d180e7c3d641e8ce8f68
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Misc cleanup from earlier patches, some naming issues and other
minor things that are needed before adding UT.
Change-Id: Ic76f0e2fd12e48782b048fb8785902b1098cf352
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When bdev is registered it will send "bdev_register" notification and
"bdev_unregister" when unregister is complete.
Change-Id: I3b37a4cb766a473f3da63a571036add366e78fa5
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When you connect a iscsi lun as a bdev, and the lun id is not 0,
all IOs will fail.
We should use the correct lun id in libiscsi.
Reproduces like this:
./scripts/rpc.py construct_iscsi_bdev -b iSCSI0 -i
iqn.2016-06.io.spdk:init --url
iscsi://127.0.0.1:3261/iqn.2016-02.com.smartx:system:fl-iscsi/1
Signed-off-by: Li Feng <fengli@smartx.com>
Change-Id: I2480e866fdda17426362aca3cb30b7e90c927547
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449318
Reviewed-by: Kyle Zhang <kyle@smartx.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Defer the initialization when cache bdev mentioned in the config doesn't
exist when the FTL bdev is being created.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I084502ae38c9ae5e385e5566550ec3cb8b6f9d2e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448630
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added means to configure libftl to use (optionally) another bdev as
persistent write buffer cache.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I97028a681be168d9386eac8a226631ff772f803b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448629
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Was partially present but not complete. Fits here in the series as
it requires read/write operations.
Change-Id: I552896c934bf60256625a83951a95d58d2719646
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447358
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Assert(raid_bdev->base_bdev_info) at here is unnecessary.
So remove it.
Change-Id: I7d87fbc95d8c1434ab346fd11179433547b74798
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Iacf9f6536ba5baca7b245e639d0d42a89720ba58
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448173
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As the bdev_io maybe NULL, so put the assignment after assert(bdev_io != NULL).
Change-Id: I58d6fcf97931b2f431ad5680b87b098e0c9a5e9b
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449296
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Just the starting point, base functions and structs.
Change-Id: I2ff2b672aa675a19b89e4449f1cc4aa664007f6f
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/435747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Process 32 OCF requests during poller invocation.
This will result in more flat events distribution.
This patch uses new API function: ocf_queue_run_single().
Change-Id: I0bc2ef783018fdbcf6f6e938fd7ca136ade61599
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446635
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Extend existing get_ocf_bdevs call to make it easier
to get information about attached cores.
Implementation is based adding additional optional argument "name"
to existing call. Based on "name" bdevs are filtered.
Backward compatability of RPC interface is preserved.
This patch also adds tests for the case when name is given.
Change-Id: I4300ebe37e936bc5cca8e066b5f09db462a87cf7
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444841
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
OCF requires memory retrived from mempool to be filled with zeros.
When mempool is created, information about element size is stored to be used
when new memory is retrived.
This is fix for issue #671
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Change-Id: Ieb533e3bdae0665dae18e7b3a379da0ed843c35a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449155
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Check if the UUID in the configuration is null (all zeroes) and treat it
as if no UUID has been supplied.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic91c77591528a8aaa4cf5c0241e6bde51b3757f1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448628
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe controller can be attached via asynchronous API now,
we added the RPC 'construct_nvme_bdev' with asynchronous
probe support so that the initialization can be processed
later.
Change-Id: Ic60fdde6af9c4ba9a07b874852cfba044acb06c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: Ic60fdde6af9c4ba9a07b874852cfba044acb06c8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445054
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Currently if module claims a bdev in examine_config,
it cannot start asynchronously. This patch changes this
behaviour by calling examine_disk on modules which previously
claimed bdev trough examine_config.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I85b603590c6dab50e59ef7e68f292cb9abc47d98
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448132
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_malloc() is not required here, as the bdev
struct is neither DMA-able nor shared between processes.
While here, also allocate g_null_read_buf using
spdk_zmalloc() instead of spdk_dma_zmalloc(),
as spdk_dma_*malloc() is about to be deprecated.
Change-Id: I0dc344bc84932607c2e22a124e2093e87714ec5e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448170
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For NVMe devices, in conjunction with the new batching options,
it can be advantageous to artificially delay between polling
for completions. Add an option to slow this rate down.
Change-Id: I0fc92709ff45ead0beb388dda60694bf1ed8b258
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The bdev is polling for completions continually, so it
is safe to turn this on.
Change-Id: I8ac1c46c1f683463281c4bd8b0a0781f70a72297
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is the first step which adds the callback for construct
NVMe controller RPC, the next patch will add the asynchronous
probe support.
Change-Id: Ib681d78b544c62f6f1ef66e298cd91f71c34cbc7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447030
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When users call the RPC to add a NVMe controller, block NVMe driver
will create controller and block devices based on Namespaces, so
wrapper the two actions together with a intermediate function,
this will make the code looks more clean for the coming patch.
Change-Id: Iddc072042eb2df90662c42e04427307ccf5d5633
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445658
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds support for many-to-one configuration
for OCF bdev. Meaning that one cache instance can
be used to cache multiple core devices.
Without this change, it is not possible
to attach core device to existing cache instance.
Change-Id: Idfce023c08b6d41490d590a8abb51f626252cd4d
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Those targets use the same directories for temporary
files and at the moment they race with each other. We're
seeing intermittent failures on CI:
```
INSTALL [...]/ocf/env/src/ocf/utils/utils_list.c
rm: missing operand
```
```
INSTALL [...]/ocf/env/src/ocf/utils/utils_device.h
INSTALL [...]/ocf/env/src/ocf/utils/utils_io.c
rm: cannot remove [...]/ocf/env/src/ocf/utils': Directory not empty
```
Fixes#709
Change-Id: I9bf6ee7a97144afafbb643a0e350f38abe79270f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447750
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Increase the size of small and large buffers in the bdev layer
to store DIF. Increase is the amount necessary to store 16 byte
metadata to the block formatted with 512 + 16. 512 + 16 is the
current maximum ratio of metadata per block.
This change will be done in the iSCSI library in the next patch
and other libraries may be done later.
Hence add and use an new macro SPDK_BDEV_BUF_SIZE_WITH_MD(x) for
convenience.
Change-Id: I4b5498f56c9baf3e3ed93dd1c757998d7ce65141
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use new queue API to manage OCF queues dynamically
This change allows for dynamic creation and deletion of queues
on get_ and put_ io channel.
Qeueues no longer depend on number of cores in SPDK.
Queue-to-pollers mapping list is removed as well
as locks "q_ocf_lock" and "vbdev->_lock" as they became redundant
Change-Id: I5069e1f8535f505816184a333db876afb925ac44
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446841
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Unregister calls are not guarded. Fix this by chekcing status before
doing unregister.
Change-Id: I593e27efdae17f6d89362fd8e4edccf2af2b7281
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445894
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Retry mechanism will stuck if there is no outstanding
IO after completion with ENOMEM. This should never
happen.
Change-Id: I58ebf8cc8a498231beef43ac20f58eeaad89afda
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446610
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The calling of spdk_bdev_finish is in wrong place,
the bdev subsystem recycling will be called by
_spdk_subsystem_fini_next. If we call spdk_bdev_finish
here, it will be called twice, so it is unnecessary.
And this patch will be used to address the issue
reported in:
https://review.gerrithub.io/#/c/spdk/spdk/+/447613/
Change-Id: I03dff8b84bd0d7b49675ce8300b3da623963e140
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447731
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Functions moved in this patch may be used in future by
other NVMe based bdevs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I975b61b7f78855e67d65ab7d9fd9f5dd859ac570
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443753
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Renaming functions to make it clear they are not part
of the public API.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9a283143a11090032b74684611403637bc6605a3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add a check if the number of blocks of read I/O is not larger
than allowed. This is a preparation to the subsequent patches that
support DIF in NULL bdev.
Change-Id: I82d4c835788d2f347fd5fdef82e1def313dd49a1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
iSCSI target will need to get data block size except for metadata.
Other SPDK application may need to get the same information
future. Hence this patch adds an new API spdk_bdev_get_data_block_size
to bdev layer. In the header file, spdk_bdev_get_data_block_size
is located next to spdk_bdev_is_md_interleaved to avoid confusion
by new users.
Change-Id: I0fd2a6d0bcf6a4c18c583f70d96cc5035fc57fe9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445082
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- locks moved from ocf to adapter code,
- 'data object' renamed to 'volume',
- context and volume API reorganized.
Change-Id: Id4670ddfcb8eda9aefabc273497498c5bd3db1d5
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444092
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Robert Bałdyga <r.baldyga@hackerion.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_bdev_nvme_lookup_ctrlr can be replaced with existing
nvme_bdev_ctrlr_get_by_name function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id85243b13099b2976e1368e481201ccf27ce6ddb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will make possible to make some NVMe bdev related
functionalities to be common for NVMe and FTL bdevs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iafc2acc3ac54deb762bc7205180f41d5befbb42b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443552
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Bdev NVMe controller will be used in future by other
NVMe based bdevs, so let's move it to common layer.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic485b556d622011b9e36fec1ce13394fc436bbd8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446434
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
nvme_ctrlr structre will be moved to common files in next
patch, so let's change its name to more representative.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id51c19437c2d4ba479407201b062266807156c0b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For now these are empty files, but there will be some
code in these files in following patches.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie45d6d3314c424f9af84bb3b0eba00de45215db5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446247
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a beginning of series that will provide
common code for all NVMe based bdevs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I097b4a03ef79277659f45d217c7e4e58236c98bf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445893
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
io_types like FLUSH and RESET are not always supported
by base bdev modules. For example: virtio_blk bdev doesn't
support FLUSH; ocf or ftl vbdev doesn't support RESET.
Change-Id: I569ea75f8242c8bf082d7d89996ad1c7b1791570
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
FLUSH io_type shares a same process with UNMAP, except
that in the end, it calls spdk_bdev_flush_blocks function.
Change-Id: I4529bf29b7cd9f16d10f2edc99a20d25213c9c71
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For consistency, made similar change on WIP compress patch and
want to make sure the PT bdev module is as correct as possible to be
used as a template.
Change-Id: I9d2d775b7878edd16df3c283c169746fc821c8e5
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446456
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
* Remove unneeded include files. Some of them belong in the .c file instead.
* Use create/delete_aio_bdev naming, removing aio_disk names
* Make some similar changes in the bdev_aio.c file for the associated ctx.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie325f4761f0419e9cc4e6556ab551fe606cd0d6c
Reviewed-on: https://review.gerrithub.io/c/446567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This RPC was deprecated a couple of releases ago.
bdev modules now each have their own RPC for deleting
bdevs. Due to how bdevs are created differently on
different modules, it is simply not possible to
have one delete_bdev RPC that would work for all bdev
types.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia46c95dce6e35f7557e8d41c41b8fea382924547
Reviewed-on: https://review.gerrithub.io/c/442615
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Other io_type, like FLUSH, has a similar character with
UNMAP, that has a range description (offset and length),
but has no data payload. So the process for UNMAP io_type
can be extended to io_type like FLUSH.
Change-Id: I9467dfc3cc4fc1431b79359b0c477807ec138ac7
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Default 'unmap' option stays as it was.
'Write_zeroes' comes useful when one wants to make sure
that data presented from lvol bdevs on initial creation presents 0's.
'None' will be used for performance tests,
when whole device is preconditioned before creating lvol store.
Instead of performing preconditioning on each lvol bdev after its creation.
Change-Id: Ic5a5985e42a84f038a882bbe6f881624ae96242c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
base_bdev_io_expected can be used for the situation
that IO requries multiple and uncertain number of
base bdevs.
Change-Id: I912400f839c02c95606bc94e7c8ad4946e90b6bf
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446009
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If success is false in each bdev module's spdk_bdev_io_get_buf_cb,
call spdk_bdev_io_complete with SPDK_BDEV_IO_STATUS_FAILED, and
then return.
Change-Id: I6f106d8d39a3616f7305201fa2efc4805d4d00ee
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/446046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Break out the failure handling code to a separate
function.
Change-Id: Ic530bb4d33c19edb62360e06afe3946b963445b1
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446008
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
When the specified buffer size to spdk_bdev_io_get_buf() is greater
than the permitted maximum, spdk_bdev_io_get_buf() asserts simply and
doesn't call the specified callback function.
SPDK SCSI library doesn't allocate read buffer and specifies
expected read buffer size, and expects that it is allocated by
spdk_bdev_io_get_buf().
Bdev perf tool also doesn't allocate read buffer and specifies
expected read buffer size, and expects that it is allocated by
spdk_bdev_io_get_buf().
When we support DIF insert and strip in iSCSI target, the read
buffer size iSCSI initiator requests and the read buffer size iSCSI target
requests will become different.
Even after that, iSCSI initiator and iSCSI target will negotiate correctly
not to cause buffer overflow in spdk_bdev_io_get_buf(), but if iSCSI
initiator ignores the result of negotiation, iSCSI initiator can request
read buffer size larger than the permitted maximum, and can cause
failure in iSCSI target. This is very flagile and should be avoided.
This patch do the following
- Add the completion status of spdk_bdev_io_get_buf() to
spdk_bdev_io_get_buf_cb(),
- spdk_bdev_io_get_buf() calls spdk_bdev_io_get_buf_cb() by setting
success to false, and return.
- spdk_bdev_io_get_buf_cb() in each bdev module calls assert if success
is false.
Subsequent patches will process the case that success is false
in spdk_bdev_io_get_buf_cb().
Change-Id: I76429a86e18a69aa085a353ac94743296d270b82
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/446045
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The elements and functions which are used for raid reset io,
can also be used for other potential raid IO requests which
need multiple base_bdev involved.
Change-Id: Ide7ea190fdbd29da9f9fa22862a0a7c162509697
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441308
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make modyfication of global allocator index tread safe
by using atomic operation
This patch also changes mempool size to be 2^n - 1
which makes it more efficient
Change-Id: I5b7426f2feef31471d3a4e6c6d2c7f7474200d68
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442695
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are some cases that virtual bdev open and close
the device and QoS will be disabled at the last close.
In this case, when a new bdev open operation comes again,
the QoS needs to be enabled again.
Change-Id: I792e610f4592bad1cac55c6c55261d4946c6b3e2
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442953
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For real PCIe drives, if we removed one drive, existing hotplug
monitor will trigger the remove callback twice, there is one
workaround for vfio-attached device hot remove detection which
will also trigger the hot removal callback. For now we add
the check in the bdev_nvme layer so that coredump will not happen.
Fix issue #606.
Change-Id: I0605fbdf391fed20c4aa9a2d54b4f059f29dc483
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It seems like DPDK 19.02 has split the "session mempool"
into two separate mempools but this isn't really described
in the DPDK release notes, so this patch only makes our
crypto code behave just like DPDK crypto examples.
rte_cryptodev_queue_pair_setup() no longer accepts
a separate mempool parameter but instead requires it
to be passed through a new field in struct
rte_cryptodev_qp_conf, which is also passed as a param
to rte_cryptodev_queue_pair_setup(). It's referred to as
"session private mempool" instead of "session mempool",
which makes some sense since we already use
rte_cryptodev_sym_get_private_session_size() (with the
word "private" in name) to calculate its size.
The other mempool - "session mempool" - now has to be
allocated with rte_cryptodev_sym_session_pool_create()
instead of regular rte_mempool_create().
Change-Id: I3bc6185855988b864ca59bc1972beaf4f7ea8925
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443738
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Allow user to add seed value for guard compuation to DIF context.
This will avoid the guard being zero in case of all zero data.
NVMe controller doesn't support seed value for guard computation
explicitly, and hence if we want to use such a seed value in
NVMe controller, we have to format metadata more than 8 byte,
and add seed value into the reserved metadata field.
But some popular iSCSI/FC HBAs and SAS controllers have supported
seed value for guard computation, and so supporting seed value
in the SPDK DIF library is very helpful for some use cases.
Hence this patch makes the DIF library possible to specify seed
value for those use cases.
Change-Id: I7e9e87cb441bf263e64605c7820409fdc22dd977
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444334
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
If users didn't set the "HotplugPollRate" field, the value
will be set to NVME_HOTPLUG_POLL_PERIOD_MAX, which isn't
aligned with our design purpose.
Change-Id: I9795d7a16a1cc44ed4de7c40f376c563d977b455
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch refactors driver init and in doing so eliminates the mem
leak described in the GitHub issue. Also it is now consistent with
how the pending compression driver does init.
Fixes#633
Change-Id: Ia2d55d9e98fb9470ff8f9b34aeb4ee9f3d0478f5
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We should not add addtional check since we already have this
option in timeout_cb function, the addtional check is unnecessary.
Change-Id: I77c89303155e0c14072a1838994f9e76a0ffc0f4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/445319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no need to lock g_ftl_bdev_lock when unregister a ftl_bdev.
Besides, the destructor of ftl_bdev will lock it again.
Change-Id: I99870483183879d9422584dbac6e154f605daea8
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/444794
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When hotplug feature is enabled by NVMe driver, users may
call delete_nvme_controller() RPC to delete one controller,
however, the hotplug monitor will probe this controller
automaticlly and attach it back to NVMe driver. We added
a skip list, for those user deleted controllers so that
NVMe driver will not attach it again.
Fix issue #602.
Change-Id: Ibbe21ff8a021f968305271acdae86207e6228e20
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444323
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Pass IO flags to NVMe write IO and verify PI error when PI error
occurs.
To know the location that caused PI error, checked read with disabling
PRCHK is necessary and is used in this patch.
Change-Id: Id90fb90c4b3ca95840785a4443ff98d637ceb247
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443189
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently struct bdev_io holds io_channel that the I/O was submitted
on through bdev_io::bdev_channel, but bdev_io::bdev_channel is private
in bdev.c and cannot be referenced in other files.
Hence add an new API spdk_bdev_io_get_io_channel API to get io_channel
coniveniently.
Change-Id: Ic2e2fde845d324f7a1637e3c75080727a62de5ec
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Pass IO flags to NVMe write IO and verify PI error when PI error
is detectec.
For write I/O, PI error will be already contained in write data
buffer, and no extra I/O is necessary.
Change-Id: I2f2359c4201aded7abccb182c39c00b25ff0bd5f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443188
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Including bdev_module.h and using spdk_bdev_unregister_cb instead of
spdk_delete_passthru_complete will follow other bdev modules.
This patch doesn't change any behavior.
Change-Id: Ia236ea37ae22ed5c7740b02d1c5bd37491b9cf9a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Using passthru virtual bdev's name instead of base bdev's name as
io_device's name will be meaningful. This patch doesn't change any
behavior.
Change-Id: I33f7aa78c60cd1d9f6a7b36280441bc559f44857
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444165
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsequent patches will implement PI verification when PI error occurs,
but PI verification will be different between read and write.
Subsequent patches will set IO flags for normal read and write but
will not set IO flags for checked read.
Current nesting stack,
bdev_nvme_readv/writev
-> bdev_nvme_queue_cmd
-> spdk_nvme_ns_cmd_readv/writev
-> bdev_nvme_queued_done
makes these changes difficult.
Hence this patch inlines bdev_nvme_queue_cmd into bdev_nvme_readv/writev,
adds separate completion function bdev_nvme_readv/writev_done, and
removes enum direction.
This patch doesn't cause any functional change.
Change-Id: I2f97ff21245539c690490d0fc4134d2e0049eddd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443187
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
PI check flags is not set to NVMe controllers created by hot plug
handler automatically. Document this behavior for clarification.
Change-Id: I9590d0cb7f53a24c33afd706e222065893d23cb4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444012
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add "prchk:reftag|guard" to the 3rd item of the TransportID row
in [Nvme] section.
apptag is not supported yet as same as JSON RPC.
These two patches cannot control hot added NVMe controllers, but
we should not set prchk options to hot added NVMe controllers
automatically. Hence the next patch will document this behavior
explicitly.
Change-Id: I74a73ac52779aa50c5b45e20ffb61002e95f33ef
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443835
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add prchk_reftag and prchk_guard to construct_nvme_bdev RPC.
In spdk_rpc_construct_nvme_bdev, create prchk_flags based on them
and pass it to spdk_bdev_nvme_create, and in spdk_bdev_nvme_create,
pass it to create_ctrlr.
A single option enable_prchk may be enough but add separate options
for reftag and guard to clarify that apptag is not supported yet.
The next patch will make per-controller PRCHK options configurable
by .INI config file.
Change-Id: I370ebbe984ee83d133b7f50bdc648ea746c8d42d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443833
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add prchk_flags in struct nvme_ctrlr and set it at creating of
the corresponding controller, and copy it to each bdev of the
controller.
Change-Id: Ie971a0c1539b5419de9e5168ed47ac0e579be2c5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bdev don't support APIs that passes metadata not interleaved with
logical block data. So, return error explicitly when creating NVMe
bdev with separate metadata for now.
Change-Id: I0776e72232c8e7758ad11b405e7e4914e779d131
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444011
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Metadata location and DIF type are set only if there is metadata, and
DIF location is set only if DIF is enabled.
Change-Id: Ib684b54332820446ff1a0b609f5b4e0b3d42f2f9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, the SPDK_BDEV_REGISTER_MODULE() macro uses __LINE__
to generate functions like spdk_bdev_module_register_187().
Typically, this is not a problem as these functions are not called directly
rather, they are only used as constructor functions to load the bdevs during
system startup.
There are languages however, (e.g rust) that require these functions to be
referenced explicitly to prevent them from being removed during the linking phase.
In order to reference them, having the names predictable (and potentially
changed per commit) makes things easier.
Change-Id: I15947ed9136912cfe2368db7e5bba833f1d94b15
Signed-off-by: gila <jeffry.molanus@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/443536
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
strip_size as an rpc param is now deprecated and can be removed
in a future release. Either strip_size or strip_size_kb can be
used but only one of them or the rpc will fail.
Internally we maintain both fields because strip size always
comes in as KB but we convert it to blocks so having both elements
makes it clear for developers what they're looking at.
JSON output includes both strip_size and strip_size_kb.
Fixes#550
Change-Id: I5dc51e8af22eae3d56af8f8d37a564dbaae228fa
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK 19.02 requires this mempool to be allocated via
crypto-specific function which returns rte_mempool.
To keep the amount of #ifs minimal, we'll use rte_mempool
unconditionally.
Change-Id: I3a09de41e237e168580bb92b574854e291e68a74
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443785
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We setup the qpairs on module init but never
released them. Some memory was leaked, although since
it was allocated with rte_malloc() it couldn't be
picked up by ASAN.
rte_cryptodev API offers rte_cryptodev_queue_pair_setup()
to setup a qpair, but there's no equivalent function to
release it. We have to access the rte_cryptodev structure
directly and call a qpair release function ptr that's
stored inside. It seems very very hacky, but the entire
rte_cryptodev structure is a part of the public API and
the global array of all such devices is an exported
symbol.
Change-Id: I17ac73d1098ca9a92d2dfd52e0f905e2c2b5488f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is for DIF check types.
Add enum spdk_dif_check_type to DIF library.
Add a field dif_check_flags to struct spdk_bdev and add
spdk_bdev_is_dif_check_enabled to bdev APIs.
Added enum is intended to improve usability. If no enum, the
caller will have to get raw data of flags and mask each bit.
Change-Id: Ia46a37a9684dc968dcc51963674f0a9963e0cd4d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is for DIF settings.
Add fields dif_type and dif_is_head_of_md to struct spdk_bdev and
add APIs spdk_bdev_get_dif_type and spdk_bdev_is_dif_head_of_md to
bdev APIs.
The fields dif_type and dif_is_head_of_md are added to the JSON
information dump.
Change-Id: I15db10cb170a76e77fc44a36a68224917d633160
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443184
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To support DIF, bdev will need to expose the following information:
- Metadata format
- Block size
- Metadata size
- Metadata setting (interleave or separate)
- DIF settings
- DIF type 1, 2, or 3
- DIF location
- DIF check types
- Guard check
- Reference tag check
- Application tag check
This patch is for the metadata format. Subsequent patches will do for the DIF
setting and DIF check types.
Add fields, md_len and md_interleave, to struct spdk_bdev and add APIs,
spdk_bdev_get_md_size and spdk_bdev_is_md_interleaved, to bdev APIs.
The fields, md_len and md_interleave, are added to the bdev JSON infomation dump.
DIF will be used only in the NVMe bdev module and the upcoming virtual
DIF bdev module first. But additional required storage by md_len and md_interleave
will be very small and they are simple. Hence add them to struct spdk_bdev simply.
Change-Id: I4109f6a63e6f0576efe424feb0305a9a17b9b2e8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443183
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The timeout is set to 0, so it never waits anyway. But
this should be 0.
Change-Id: I8b4058017a91b647ea9324f1474a732921c389f0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443647
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This was only temporarily required for polling. With
a per-group aio ctx, it isn't needed anymore.
Change-Id: Ie59b50a4700f0f99dea470f857d187ac656dd229
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443467
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We only need one aio context for the entire set of channels
sharing a thread.
Change-Id: I1143247901586efe50530b28323ddb923bc6b242
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443314
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is marginally more convenient.
Change-Id: I9989d687b80051ccb2e07edc5e1efdbca75e8716
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443313
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This will be used later.
Change-Id: I12b07756a13d03a34c9705306d720c1db7ecb15c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443312
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This wasn't actually necessary. The next patch in this series will
change the way aio is used such that only one aio context is
polled for the entire group of channels on a single thread.
Change-Id: I05c4d824d9c63a51c8a2d608d84c184f249f66d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443311
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This isn't used just yet, but will be necessary temporarily
during this patch series.
Change-Id: I7f04426c27e3fe0417e2f60bac28217fa44c0cb2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443310
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Move it next to the other channel definition.
Change-Id: I9ec33c135836d3dc326abe4ce7588e7a2eff77d4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443309
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These didn't need to be visible.
Change-Id: I337a02802cac4431b4abd9a922408d4147801565
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443308
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Small static function only called from one place, so
just inline it.
Change-Id: Ibc54f790da55dd1635d81181208b1d506550ca9c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443307
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It does not need to be in the header file.
Change-Id: I5c489de81e48b11d02b66cbdd6d9ac05eae16429
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443306
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function gets used as a function pointer, which
seems to keep the compiler from trying to inline the
function. Stack manipulation was showing up in the
perf profile pointing to this. Marking the function
as inline gets it actually inlined in the hot I/O
path.
Improves bdevperf microbenchmark from 78M to 85M IO/s.
Cores are virtually identical - 11.4M on core 0 and
10.4-10.6M on remaining cores.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iadced071dfc07fc09db6da3571c930988b2dc3fd
Reviewed-on: https://review.gerrithub.io/c/443278
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This keeps the hottest structures at the head of the
cache and helps improve performance.
Improves microbenchmark (8 null bdevs on 8 lcores,
bdevperf seq read with qd=1) from 67M to 78M on my
Xeon E5-v3 system. Core 0 performance remains about
the same (10.7-10.8M) but others cores improve from
around 8.0M each to 9.4M.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia3ccf94ab39b6f911127f0bd1016e352027b11fc
Reviewed-on: https://review.gerrithub.io/c/443277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
According to the current implementation, the functions that called by
bdev_ftl_init_bdev() will not call callback if they return errno.
Besides, the caller of bdev_ftl_init_bdev() (e.g.
spdk_rpc_construct_ftl_bdev()) don't expect callback be called if callee
return errno.
Change-Id: I5f36d5332ac66db65bb2090e9625a73b1107306b
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/443068
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is no need to hold g_ftl_bdev_lock when calling bdev_ftl_create.
Besides, the functions (e.g. bdev_ftl_add_ctrlr) that called by
bdev_ftl_create will lock g_ftl_bdev_lock again.
Change-Id: I74751822364e16c58a3065dc78f8a4dce157e925
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/443066
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After passing the check of protective mbr, there is a high probability that
this bdev is in gpt format. If parsing primary table fails, read the secondary
table and try to get partition info from it. When parsing secondary table
successfully, add a warning log to notify users that primary table is broken.
Change-Id: I4f16edcdd57b9cde8d8cc74ec88ba95b97bd6b63
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/441201
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Modify existing code of parsing primary partition table to support parsing
the secondary.
Main difference of these two tables is that they have inverse buffer layout.
For primary table, header is in front of partition entries. And for secondary
table, header is after partition entries. So add helper functions to extract
header and partition entries buffer region from primary or secondary table
based on current parse phase.
Split the exported funtion spdk_gpt_parse into two functions spdk_gpt_parse_mbr
and spdk_gpt_parse_partition_table. So spdk_gpt_parse_partition_table could be
used to parse both primary and secondary table.
Change-Id: I7f7827e0ee7e3f1b2e88c56607ee5b702fb2490c
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/441200
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Unmap, discard, write zeros will be sent down from
higher stack. Remove these IOs for the QoS limit.
Change-Id: Ieb3cc19f31c43f8ddf8f8d2fd338f442ef48b679
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442673
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This RPC doesn't really work in some cases - for example,
trying to delete one NVMe namespace bdev from a controller
with multiple namespaces, or just one virtio SCSI device
from a virtio-scsi controller. We've previously kept it
and marked it as "debugging only" - but every bdev module
has its own RPC method now for deleting what it constructed,
so keeping the generic delete_bdev RPC is asking for
trouble in some of the cases mentioned above. We'll remove
it in the 19.04 release.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I639254b32a3e1c840a4e9ae2658c42f4f321b676
Reviewed-on: https://review.gerrithub.io/c/442616
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The io_device associated with the aio bdev was only
getting unregistered when the aio bdev was explicitly
deleted - not in the implicit deletion path at shutdown.
Move the io_device_unregister into the destruct_cb -
this makes sure the io_device is always unregistered, whether
the bdev is getting unregistered via an explicit RPC or
implicitly in the shutdown path.
Fixes#618.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I44b77f5c38339f4cf97b02c0ee4002bf5fcc9998
Reviewed-on: https://review.gerrithub.io/c/442119
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Error check of strtol is left to users of it. But some use cases
of strtol in SPDK do not have enough error check yet.
For example, strtol returns 0 if there were no digits at all.
It should be avoided for each use case to add enough error checking
for strtol.
Hence spdk_strtol and spdk_strtoll do additional error checking
according to the description of manual of strtol.
Besides, there is no use case of negative number now, and to keep
simplicity, spdk_trtol and spdk_strtoll allows only strings that
is positive number or zero.
As a result of this policy, callers of them only have to check if
the return value is not negative.
Subsequent patches will replace atoi to spdk_strtol because atoi
does not have error check.
Change-Id: If3d549970595e53b1141674e47710fe4dd062bc5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/441626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This was marked deprecated in 18.10
Change-Id: Id47e770b0388c935fe684aeef7a9824f24cef47f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442416
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add rte_pause to waiting while loop
This commit also adds spdk_pause as interface for rte_pause
Change-Id: I56e1023731e2e78febaa4f45808d6f07656d290f
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/436494
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
