a pause
This now also takes a lock instead of requiring a pause of the whole
subsystem.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7de174f3f56d2b3767e723387c4f2257107d8b19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4581
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The list of allowed hosts is only checked during handling of CONNECT
commands - not in the main I/O path. Protect that list with a mutex
instead of requiring a full pause of the subsystem to allow
dynamic management of the allowed hosts without impacting any
active I/O.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3f7e87cc1fa6de200c422928c07153fc60fab28c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The WQ has not been provided a PASID so virtual addressing is not
supported. This worked previously because all test set ups had IOVA=VA.
Change-Id: I6b08714e246a0dc8d5bc0f31efa4b90b601c5b4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
I think these two lines code can be simplified one line.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ibfc876e8de1c5a39cde94ed2ad57b5095a098f3b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4375
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Pack all of the hot data into the first cache line. The first cache line
covers everything up to and including the ctrlrs TAILQ.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I184520661743aec91b3bb3d81e53fe8610c9383e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4554
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This saves 2 bytes and allows it to pack nicely with the
changing state bool (which must remember separate for atomic
operations).
Change-Id: Ibb92ae3c74306e60385ae23d0aaf877f33a69095
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4553
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Pass not bdev but bdev_name to scsi_lun_construct() to fix the
race condition due to the time gap between spdk_bdev_get_by_name()
and spdk_bdev_open(). A pointer to a bdev is valid only while the
bdev is opened.
spdk_bdev_open() has been replaced recently by spdk_bdev_open_ext(),
but the issue still existed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic462422dbc2501c24907f56a36570fbb54fef65b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4482
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We can receive buffer reclaim notifications only when a qpair is
attached to a poll group (so qpair's socket is connected to a socket
poll group).
The previous assumption that we enable zcopy only for IO qpairs was
wrong since IO qpair might not use poll groups too (e.g. abort
application).
Fixes issue #1607
Change-Id: I67329d755d81da6606e65eddfeceb20839346d87
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4476
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Here we add some new variables which we will be able
to use in a later patch to generate pkg-config files
for this env_dpdk library and our DPDK library
dependencies.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a256096ea08f97eba5d4460405f419624e6f0bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4468
Reviewed-by: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we support spdk_nvme_detach_async(), any controller may be
destructed asynchronously. We will be able to know the case by
ctrlr->is_destructed is true and ctrlr is queued in the attached list.
nvme_ctrlr_probe() should fail if the found ctrlr satisfies these
conditions.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I299c2e5ea3c16cc1239899c163bb9e0eb921ade5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
With new funtion it is allowed to successfully parse json values even
if doceder for given key is not found.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I036f263e9050bd2b96aaa3ff61a9542c98365892
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4340
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Memory allocated for impl_name is not freed in error cases.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: If7cd62d948a05421b0bd5d1599f1275a0f3b4597
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When uring is enabled, uring socket implementation is
used to create sockets. We may want to use posix sockets
for some reasons (e.g. performance tests). This patch adds
a new API function to set the socket implementation which
will be used by default, e.g. when no impl_name is passed
to spdk_sock_connect/spdk_sock_listen functions.
Misc changes: include spdk_internal/log.h to register
SOCK log component. The new include header already
includes spdk/sock.h and spdk/queue.h, sow remove
direct inclusion of these headers.
Change-Id: I4abad0a59cd033b15bd43a00e3dbdf313fa6b06c
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4327
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Without this change nvmf_ctrlr_create() will fail to lookup
the subsystem listener matching this qpair.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: I855baa16e996737b60dbd745ce84f8c0bc024cf1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add getters to the ZNS specific data structures, so that an
SPDK application, e.g. examples/nvme/identify/identify.c,
has the ability to get and utilize the information in them.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I26056161093cc811acb6840ff7e2068e5f6058f6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a new state in the SPDK NVMe state machine in order to fetch
I/O Command Set Specific Namespace data structures.
Right now there is only support for the Zoned Namespace Command Set
Specific Identify Namespace data structure.
The NVM Command Set Specific Identify Namespace data structure is
all zeroes right now, reserved for future use.
The Key Value Command Set Identify Namespace data structure is not
all zeroes, however, adding support for Key Value is outside the
scope of this patch.
The new NVME_CTRLR_STATE_IDENTIFY_NS_IOCS_SPECIFIC state is added
after the NVME_CTRLR_STATE_IDENTIFY_ID_DESCS state. This is because
we need to have fetched the identifiers in the desc list in order
to know which command set a namespace belongs to.
A slightly nicer design might have been to refactor the NVMe state
machine to first fetch the id desc list, then the identify namespace
struct, and finally the identify IOCS specific namespace struct.
However, since this would have required a lot of changes, it didn't
really seem justified.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I62cbc533c2c3eec1ccf0ba9b1c414d5a70919cff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4368
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a new state in the SPDK NVMe state machine in order to fetch
I/O Command Set Specific Controller data structures.
Right now there is only support for the Zoned Namespace Command Set
Specific Identify Controller data structure.
The NVM Command Set Specific Identify Controller data structure is
all zeroes right now, reserved for future use.
The Key Value Command Set Identify Controller data structure is also
all zeroes right now, reserved for future use.
The new NVME_CTRLR_STATE_IDENTIFY_IOCS_SPECIFIC state is added
after the NVME_CTRLR_STATE_IDENTIFY state. That way, if support for
the Zoned Namespace Command Set is enabled during probing, we will
fetch the Zoned Namespace Command Set Specific Identify Controller data
structure, regardless if any Zoned Namespaces are attached or not, and
no additional steps will be needed once a Zoned Namespace is attached.
Since we only have one command set to fetch, avoid creating
NVME_CTRLR_STATE_IDENTIFY_IOCS_SPECIFIC substates, although that will
probably be needed when support for another command set is added.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I95535b09b03b7ef2ee9a11eebdbd28aad66d65ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4367
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When adding an additional state to enum nvme_ctrlr_state, abidiff (1.6.0)
will report that almost every public interface in the nvme library has
been impacted, causing test/make/check_so_deps.sh to fail.
While it is possible that by adding another state, the compiler decides
to use a larger data type for representing enum nvme_ctrlr_state, abidiff
shouldn't complain in the first place, since spdk_nvme_ctrlr is only
ever exposed as an opaque handle. It can never be accessed directly.
Jim Harris suggested to workaround this abidiff bug by changing the type
of spdk_nvme_ctrlr::state from enum to int.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I8b85446580043e95cf791249d643907587e2f982
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4427
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This seems to be causing some CI test failures. So
disable zero copy in all cases for now for client
sockets.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iceea09fe65fb90c7df15f500878a473f1ad4152c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4473
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
DPDK patch (4143b122) included in DPDK v18.05 replaced
MEMPOOL_F_NO_PHYS_CONTIG with MEMPOOL_F_NO_IOVA_CONTIG.
Meanwhile latest DPDK from (28e3c8b2) removed the
MEMPOOL_F_NO_PHYS_CONTIG.
This patch simply replaced the define, since it will
work for any DPDK v18.05+.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I43ada50df31be18c724b2f5078d3f29f3d1c0c71
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4418
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This library has existed since DPDK 17.05, so there are
no supported versions of DPDK that do not contain this
library.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I84f2b77046d093989dfa9533f3d1c76e8c243c3f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4417
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These libraries have existed since DPDK 17.11. We
do not support any DPDK versions older than that, so
there is no need to conditionally handle cases where
those libraries do not exist.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3906db4d07ae04344b4c3bfaac02da58f248bf75
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This library was removed in DPDK 2.1 which SPDK has
not supported for a very long time now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I01cf47078e69b9d396a80f5680a4f1c1c3a9be46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Only libraries that are using shm_open require linking
rt when creating the shared library. Stop including
it on every library and just add it to LOCAL_SYS_LIBS
in the one case where it is used (spdk_trace).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic13128873a76c355b14871a0dea0922488c9cd13
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4370
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
LOCAL_SYS_LIBS is meant to define *direct* system
library dependencies for a given library. libuuid
is directly used by the SPDK util library and then
other SPDK libraries use uuid indirectly through
util.
So only the util library should include uuid in
LOCAL_SYS_LIBS.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia0d2d63f48e6f89891164cf2f9dc4c7a6476d4e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In NVME TCP initiator zero copy is enabled for IO qpairs
and disabled for admin qpairs
Change-Id: Ibdf521dccde9b95ec5dd15a5eb2baed8fcf8b88e
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
This option will be used to disable zero copy
for admin qpair. This is needed since the admin
qpair's socket is not connected to socket poll group
and we can't receive buffer reclaim notification.
Change-Id: Ibfbb8a156aafcd7ba8975a50f790da7fbd37d96f
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4210
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
With zero copy enabled, some requests might be completed out
of "process_completions" call and we should take them into
account to return the correct number of completions.
Change-Id: Iba7973f6da815645bbfad0334619d46b66379226
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
We should wait for both events to occur before continue qpair
initialization.
Add a new bit to nvme_tcp_qpair::flags to track receiving of icreq ack
since icreq is sent without tcp_req and there is no way to apply
existing synchronization mechanisms.
Move tcp qpair to initializing state if we receive icresp before icreq ack,
this state will be checked during handling of icreq ack to continue
qpair initialization
Change-Id: I7f1ec710d49fb1322eb0a7f133190220b9f585ab
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
Since nvme_tcp_qpair_process_completions doesn't process poll
group, we can't get asycn notification from kernel.
1. Add a qpair to poll group before we send icreq in order to be able
to process buffer reclaim notification.
2. Check if qpair is connected to a poll group and call
nvme_tcp_poll_group_process_completions instead of
nvme_tcp_qpair_process_completions when waiting for icresp
3. Add processing of poll group to nvme_wait_for_completion_timeout
and nvme_wait_for_completion_robust_lock since they are used to
process FABRIC_CONNECT command
Change-Id: I38d2d9496bca8d0cd72e44883df2df802e31a87d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4208
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently host/data digest are bool members of nvme_tcp_qpair
structure. Change the type of this members to bitfield, reserved
bits will be used in the next patches to support zero copy.
Change-Id: If0659bf2445901e45fe0816af5f4fca5f494b154
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4206
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
Make sure that we complete a request (call user's callback)
when all acknowledgements are received. For write operation -
when we received send cmd ack, h2c ack and response from target.
For read operation - when we received send cmd ack and c2h
completed
Since we can receive send ack after resp command, store
nvme completion received in resp command in a new field
added to tcp_req structure
Change-Id: Id10d506a346738c7a641a979e1c8f86bc07465a4
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
Some NVMEoF TCP targets can send several R2T requests. We should
check that we finished the previous H2C (received buffer reclaim
notification from kernel) before sending the next H2C.
This patch adds a new ordering bit indicating the described case
and 2 fields to nvme_tcp_req to store the values from the last R2T
request which will be applied when send ack is received.
Change-Id: Iaa5ad846712ca18a8382680baa02413c18c4eb37
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4203
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the capacity of scsi bdev has changed, vhost-scsi should
notify the guest to handle this change.
Change-Id: I1087b28cdb719f6b727ff0ae486cee6a0719bb0c
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4124
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently, the scsi bdev only supports the hotremove event,
and the scsi library uses the deprecated `spdk_bdev_open` function.
In this patch, add the resize event support, so the upper layer
could do more actions, like vhost-scsi could notify the guest os.
For the scsi compatibility, add _ext suffix for some public api.
Change-Id: I3254d4570142893f953f7f42da31efb5a3685033
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4353
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This was accidentally bumped twice (3 to 4 to 5) since
v20.07 release.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia5bda3349fa5c1fce37166fe4b640ff722bb7e3a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It should be 16 but not 6. For example, it will have 16 priorities
when configuring ADQ with Intel's 100G NIC.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Iebdf7b379c15f3b5fd16dba2ad87ec55af04577f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We have some RPCs defined in the bdev library itself,
others in a separate bdev_rpc library. There's no need
for the separate library - just move them all into the
bdev library.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I298eedb88924197e64eb315369efb10f402903a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4364
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no need to have the application-level RPCs
defined separately from the event library itself
(which defines the application framework).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic264ed761f5ec1a40d604e63395c5740af4be1a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The log_rpc library serves little (if any) use in
isolation. It makes more sense to just include
this code in the event library. The event library
already depends on and uses the log library, and it
is natural to just enable these RPCs directly in
that library instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie39b8598ce0c06729a13d188ce00da44a996accc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4362
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This RPC was originally put into the app_rpc library,
but the log_rpc library is a better home for it, since
other log-related RPCs are already there.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7ba5ac6cdeb57fb4219244690590c8fabbc3f59a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Meanwhile, to verify an issue about git push unittest failure.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Idac60e5832390eb8bdce68aee639be2e9ac6cff6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4373
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add spdk_nvme_ns_get_ana_group_id() and spdk_nvme_ns_get_ana_state()
to getthe ANA group ID and the ANA state of the given namespace,
respectively.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id5f1f7ee488a1eb2a7a77f9986a3bb89146628e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4354
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
