Add dump the current configuration of raid bdevs to the specified
file for .INI config file.
.INI config file will be deprecated but this addition will be helpful
for now.
Change-Id: I35582ceaff18d81b066e3e63e0c8c22525ec6b9e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/426299
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This part was duplicated but was not removed during refactoring caressly.
Additionally, the variable iter was not changed to the single character
variable i too.
Fix them in this patch.
Change-Id: I1e026434ce48e9e8d492a3aa772c3be6df0b1d37
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/425528
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The type of the second parameter `success' of spdk_bdev_io_completion_cb
is bool. Hence change the code to use bool type success or failure.
Change-Id: I9e93f4ccbb085e8e184f209e706915dcd34aa966
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/426648
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
according to commit:
bdev: add spdk_bdev_queue_io_wait
This patch will make io_wait to support vbdev_passthru
Change-Id: I282b52a7dc0e0fdbfe79e570b0c6a84b01c390ea
Signed-off-by: Ni Xun <nixun@baidu.com>
Signed-off-by: Li Lin <lilin24@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Reviewed-on: https://review.gerrithub.io/426163
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The function spdk_bdev_part_io_type_supported() internally invokes
io_type_supported() as provided in the base bdev's function table.
This function should be called with the base bdev's context instead
of the bdev itself.
Change-Id: I5fbda0521f05b86dd81725614c5e45ee170cd8f5
Signed-off-by: Wael Halbawi <waelhalbawi@gmail.com>
Reviewed-on: https://review.gerrithub.io/426306
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We kept this disabled by default originally because it lacked
multiple iov support needed for vhost and nvmf in-capsule data.
Now that support has been added, there is no reason to not
enable it automatically - it has no extra package dependencies,
so requiring users to specify --with-raid to configure is just
an extra unneeded step.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia9796370e12a6f93993e70083de36114a37851bd
Reviewed-on: https://review.gerrithub.io/426003
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It was writing TransportId (lower-case d) instead.
While here, fix similar issue in etc/spdk/nvmf.conf.in.
lib/conf uses strcasecmp(), meaning TransportID and
TransportId are effectively the same, but it's better
to reduce confusion and just use the same in all places.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2996ba46a5c2a239650e841d5b57424ff00f47e6
Reviewed-on: https://review.gerrithub.io/426001
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
rpmbuild pointed out that this is wrong to have executable files without
shebang. Taking the opportunity and fix this for other files too.
Change-Id: Ib21f436672150edc0aff511bff2eb6839870cf79
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/425382
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Initial support for softare AESNI_MB DPDK driver only.
Have tested (both aesni and QAT seprately and concurrrently) on underlying NVMe devices
with bdevio and a bdevperf script that runs IOs from 512B to 128K each with Q depths from
1 to 512 in powers of 2 for 30 seconds each run.
QAT can be included in the code (but not makefile) and marked as experimental
until we are ready to test in CI. It works well on 2 systems but is a big PITA to get
the hardware setup and configured for use with DPDK (IMHO).
Change-Id: If518c3df8e74e00efa18afdf194824c5e69778fc
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/403107
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I0276528c360874eefa7f2f1ecb8a35fa57cee669
Reviewed-on: https://review.gerrithub.io/425357
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We do not need to split I/O to single base bdev
RAID, since strips do not really apply.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0fa741f627b5aeb15d2ab19365afac4f48248654
Reviewed-on: https://review.gerrithub.io/425322
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
These new names are a bit more clear after some of the recent
I/O splitting changes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibe265ca2f969ee1058316c519e5d679861e03713
Reviewed-on: https://review.gerrithub.io/425321
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The bdevio tests will now work on RAID volumes, so enable
RAID testing there too.
It is probably safe now to just build RAID by default, and
not require --with-raid - but let's do some more testing
with vhost and NVMe-oF against it first before we do so.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I15697f035cb688574a7ecb8be24d0c84fc622d83
Reviewed-on: https://review.gerrithub.io/423408
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Implementation was updated by the previous patch series but the
comment was not. Hence update the comment in this patch.
Change-Id: Ib2097561501984c4ad213652ba716ce195c7bea5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424737
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use helper function raid_bdev_config_find_by_name() in destroy_raid_bdev
RPC.
Besides, unify two iterator variables in construct_raid_bdev RPC.
This is too small to add in a separate patch.
Change-Id: If0bbae8993af4e402a82299db378e89245b8966e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
raid_bdev_config_destroy_check_raid_bdev_exists() and
raid_bdev_config_destroy() do almost same operation and can be
unified to raid_bdev_config_destroy().
Comment in spdk_rpc_destroy_raid_bdev() about raid_bdev_config_destroy()
are duplicated with the one on top of the raid_bdev_config_destroy().
Hence remove the former in this patch too.
Change-Id: I4a323bf24d2266e2da7f030c52771013d075eb31
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424149
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Initialization of bdev modules don't have fixed ordering.
Hence both cases should succeed to create configured raid bdev
for .INI config file.
1. create raid bdev and then create base bdevs of it.
2. before creating raid bdev, create base bdevs of it.
To do this, factor out adding base bdevs to raid bdev
to a helper function raid_bdev_add_base_devices() first
and then apply it to construct_raid_bdev RPC and parse .INI
config file.
Change-Id: I4389fd4e7bd41296dfa9210bbe8b60348ee5bc9d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423769
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change the behavior of construct_raid_bdev RPC to be consistent with
other bdev modules.
Create a config of raid bdev first. Then create a raid bdev based
on the config.
If both succeed, the config and the raid bdev are not removed even if
any failure occur later in construct_raid_bdev RPC. Otherwise, both
are removed and return failure.
During iteration of adding base bdevs in construct_raid_bdev RPC,
- skip any nonexistent bdev and move to the next base bdev.
- if adding any base bdev fails, move to the next bdev.
- if adding base bdevs don't fail but any base bdev doesn't exist,
the raid bdev is in the configuring state and return success.
- if adding base bdev fails, the raid bdev is in the configuring state
and return failure.
- if all adding base bdevs succeed, configure the raid bdev. If configuring
the raid bdev fails, move the raid bdev to the offline state and return
failure. If configuring the raid bdev succeed, return success.
check_and_remove_raid_bdev() becomes unused in raid_bdev_rpc.c but
is still necessary in UT. Hence move this function to UT.
In UT, finding a raid bdev config by name becomes necessary. Hence
factor out the iteration to a function and use the function in UT.
Change-Id: Ifa36967bdc987d97030e3a4e36684cb37b329d4e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When construct_raid_bdev RPC is callled, even if all adding base bdevs
to it fail, a raid bdev with no base bdev should exist and be in
the configuring state.
Extract raid_bdev_create() from raid_bdev_add_base_bdev() and put it
before starting iteration of raid_bdev_add_base_bdev().
This change cam be applied to .INI config file too.
Change-Id: Ia71aca0bbdb33049fe5bd9b8fd8163c99c032401
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424148
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This prevents us from using the bdev embedded in the lun after it has
been freed.
Change-Id: I780cf3eccca05a58d3461366fec024be42b8ff74
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/425174
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We cannot split an iov if a buffer hasn't been
allocated yet. So always call spdk_bdev_io_get_buf
on reads before trying to split.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2c26efb9dc6cb2c7c3e3b7ae5bab2c37844b9113
Reviewed-on: https://review.gerrithub.io/424879
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_bdev_io_put_buf() is responsible for reclaiming
bdev-allocated buffers from a bdev_io. If there are
bdev_ios waiting for one of these buffers, it calls
spdk_bdev_io_set_buf() on the next bdev_io in the queue.
This will set the iov_base and iov_len on the bdev_io
to point to the bdev-allocated buffer.
But spdk_bdev_io_put_buf() was calling spdk_bdev_io_set_buf()
on the just completed bdev_io, not the next bdev_io in the
queue. So fix that.
Fixes: 844aedf8 ("bdev: Simplify get/set/put buf functions")
Reported-by: Alan Tu
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibbcad6e35a3db6991bd7deb3516229572f021638
Reviewed-on: https://review.gerrithub.io/424880
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When new bdev was created, the struct spdk_bdev_module::examine_disk()
may open and close bdev. On the other hand, if something goes wrong,
the creation procedure may unregister new created bdev, so race
condition appeared between _remove_notify() and spdk_bdev_close().
Add the new field "closed" and "remove_notified" in struct spdk_bdev_desc,
so _remove_notify() and spdk_bdev_close() knows how to deal with this
situation.
Change-Id: Ibfe915a4d76096796b039a13a4f49f26669eba2c
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/423369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bdev_close() must be called on the same thread as
spdk_bdev_open(). Further, the remove callback on the
descriptor will also be run on the same thread as
spdk_bdev_open().
Change-Id: I949d6dd67de1e63d39f06944d473e4aa7134111b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424738
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When emulating write_zeroes commands on device that
don't natively support it, we submit a write with
a zeroed buffer. We used to just reuse the original
bdev_io, but that was recently changed due to other
splitting code added for iovs. But when making those
changes, we forgot to free the bdev_io for the
write that was sent down to the device.
Fixes: 183f37e8 (bdev: do not reuse bdev_io when...)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If08782c65f6305c0a9f9d15d74fd8823e1158e9b
Reviewed-on: https://review.gerrithub.io/424733
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I28f21649feae8022cd0f0afd5b01ae3ee2b3592e
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/424618
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This RPC does not work for a lot of bdev types. For
example, NVMe namespaces and virtio scsi LUNs are not
explicitly constructed by an RPC - they are indirectly
constructed by an RPC associated with an NVMe controller
or virtio-scsi controller.
While here, remove spdk_bdev_config_json. It was
only created to facilitate this get_bdevs_config RPC.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I537166d8f91ab458bd2000859d74f7254bfc9c0a
Reviewed-on: https://review.gerrithub.io/424584
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This isn't valid RPC so it needs to be removed. Bdev modules were
working around this issue by defining empty write_config_json
methods.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3c4c20249eadfcfb4103430f5801190b14897249
Reviewed-on: https://review.gerrithub.io/424582
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
io_device is registered, but never release.
It will lead spdk_io_device_register to fail
because allocate new io_device may reuse the same memory address.
Change-Id: I3359ed783c1df43ef382669d9d73d06bfbc1fe2d
Signed-off-by: Li Feng <lifeng1519@gmail.com>
Reviewed-on: https://review.gerrithub.io/424235
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was added a long time back for tracking an rte_mbuf
whose buffer was a different rte_mbuf - all related to
a userspace TCP stack that is no longer in development.
The concept isn't useful now, so remove it to reduce
the complexity of the tracing code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I310e492eba7f55df242bb29d82fb19f6daee1f51
Reviewed-on: https://review.gerrithub.io/424565
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is a string name used for debugging only.
Change-Id: I9827f0e6c83be7bc13951c7b5f0951ce6c2a1ece
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424127
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
There could be cases (especially in virtualized and/or test
environments) where we could accumulate significant skew in
the timeslice frequency. Rather than depend on the application
framework to try to guarantee the rate of timeslice poller
callbacks, keep track internally of the last time the poller
was invoked. If/when we accumulate and detect skew equivalent
to one or more timeslices, increase the allowed IO and bandwidth
of the next timeslice to accomodate.
Since bdev poller now calls spdk_get_ticks() to do accounting,
this patch also fixes up the increment_time() unit test function
and the test env layer to properly increment the fake TSC.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iba301ddc0fb3d02042106a8bf6e4a6a9a84dc263
Reviewed-on: https://review.gerrithub.io/423580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
buf is no longer needed, now that RAID I/O will never
span a strip boundary.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icc03b985f540797597c238005bf9883f6f8ad010
Reviewed-on: https://review.gerrithub.io/423406
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This has been reduced to just a call to
spdk_bdev_io_complete(), so it is no longer needed.
While here, call spdk_bdev_io_complete() directly
in the strip-crossing error case as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia949e3fd55b52e5c873bd591e541ecf6c0c086b1
Reviewed-on: https://review.gerrithub.io/423327
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Now that I/O never span a strip boundary, we don't
need to count splits.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iea5df5ca055fe4b338fb5cb0828a45502c239458
Reviewed-on: https://review.gerrithub.io/423325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Set the bdev->optimal_io_boundary to the strip size, and
set split_on_optimal_io_boundary = true. This will ensure
that all I/O submitted to the raid module do not cross
a strip boundary, meaning it does not need to be split
across multiple member disks.
This is a step towards removing the iovcnt == 1
limitation. Further improvements and simplifications
will be made in future patches before removing this
restriction.
Unit tests need to be adjusted here to not span
boundaries either.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08943805def673288f552a1b7662a4fbe16f25eb
Reviewed-on: https://review.gerrithub.io/423323
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Splitting a 1TB unmap into individual 64KB unmap commands
(for a RAID volume with 64KB strip size) would be awful -
the RAID module can be much smarter about this.
So back out the changes for splitting I/O without payload.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I24fe6d911f4e3c9db4b2cb5d66c7236a5596e0d9
Reviewed-on: https://review.gerrithub.io/424103
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This removes assumptions about hte lifecycle of these variables relative
to the parent bdev and allows us to avoid ambiguity about who
is responsible for freeing these buffers.
Change-Id: Ia996653562d532fa1501faf21d3fdff85033ab33
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Next patch will keep RAID bdev without removal when adding any base
bdev to the RAID bdev fails for some reason for construct_raid_bdev
RPC.
The half-baked RAID bdev will become unnamed and this should be avoided.
Change-Id: I3ad0d58a04a7638b9b286babe0e56e057e7f5d0d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423621
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
When check_and_remove_raid_bdev(raid_cfg) is called, raid_bdev
must be in configuring state. However, offline state will be
probable as well. Besides similar and more comprehensive state
check is done in raid_bdev_cleanup(). Hence remove this check.
Change-Id: I8526da51828f18a8393afbd3d81c0a52f2d33261
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
When a raid bdev is constructed by JSON-RPC construct_raid_bdev,
information about config and slot can be passed to
raid_bdev_add_base_device() and raid_bdev_can_claim() doesn't have
to be called.
Hence extract raid_bdev_can_claim_bdev() from raid_bdev_add_base_device()
and put it to raid_bdev_examine().
Change-Id: I92e02bf3661cb97b691246f32198ba946810d96c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
When the name of raid bdev is already used by any existing bdev,
spdk_bdev_register() will fail. Hence checking if bdev is duplicated
can be left with spdk_bdev_register().
Change-Id: I22f0c75b0e87c5bd71ece383d146ec61cfaf2627
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423617
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
When raid_bdev_alloc_base_bdev_resource() is called through raid_bdev_examine(),
if raid_bdev_alloc_base_bdev_resource() fails, raid_bdev_cleanup() is called
without freeing base bdev resource.
There is no way to free base bdev resource in this case.
Hence remove cleanup call.
Change-Id: I93494502bfe653293825e11872de5883702e495a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423616
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
