Getting number of nvme devices before check if this is
null_block test caused fails.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I55b0399561ddb11b2f6c36408a56c525e813d239
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3497
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
By default, vagrant executes rsync with --copy-links argument which
instead of copying the actual symlink is actually copying the file
given link points to. Since symlinks are part of the spdk repo,
they need to be synced "as is" - when symlinks are replaced with
actual regular files, git will report that as a typechange, messing
up status checks that our tests perform.
Change-Id: I72814547c3e876ab2adbc779159ca991f18cbe86
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3375
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Zero copy send can cause performance degradation with small
payloads. This patch adds an option to disable it if required. By
default zero copy is enabled.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I14f2b21ad375e770cb08f850360898bac675b351
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Receive pipe reduces number of system calls and gives significant
performance improvement with kernel TCP stack and relatively small IO
sizes. With user space TCP/IP implementations there are no system
calls and double buffering introduced by pipe has negative impact on
performance. Receive pipe remains enabled by default.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ic5ddee42293df2c233ba7ffbe6662de7917ac586
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Check if given pci address is bound to nvme driver via a separate
function - this makes the task of getting list of the nvme devices
that can be used in tests a bit easier since we don't have to relay
on, e.g., gen_nvme.sh where the extra step to get said devices is
to parse the actual config.
Change-Id: I1f15f08a3678c0c41b051348af259e225356c340
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3014
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Running pkgdep on opensuse, but report error about:
'Not supported platform detected.'
ID=opensuse-leap must link to sles.sh.
So add this.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I059378da2b1a9cb7b7f6953d158956690d80053b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3220
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Adding fedora31 to the list of available choices
in create_vhost_vm script.
This requires some changes in Vagrant_vhost_vm because
fedora is configured differently than ubuntu.
Fedora VMs will very useful for vhost tests because
they run on fedora.
Change-Id: Iad2820a9c3fe2621a368be34d9a72b80ad3f4941
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1677
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
During nvmf perf test, on machines with have local
nvme device figure out that they are added to
fio.conf file, that can caused bad for results.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ibb6aa7b29ee63a8c41cd80909bc26d1dc224dd0c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3113
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Make the abort execution timeout value as optional.
Zero is acceptable and means immediate timeout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b03c65b8bd15899f48be9476ee657446147581
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3104
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bandwidth measurement is realized by bwm-ng tool.
Using this measure tool will help us to check network saturation.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I7b95b9b4ac3ca3b1847ec72ab7ea333807befe89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3190
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The original image was prepared using SCSI bus.
Using IDE explicitly speeds up boot process as the
system does not have to look where to boot from.
Change-Id: Ia9f649d1c46c591135833c02ed60b3c960ad8b98
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2840
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Arch Linux instance is failing on that CI. Seems that
libffi is a dependency for installing configshell_fb
and it's missing.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I988f2fb5e879b9e8882409c9c2772d5bd2c5e045
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
In some OSes (e.g., Fedora30), /usr/lib is not one of the default
library loading paths. So Let's change it into /usr/lib64.
To address: #1471
Change-Id: I89a66b6096fc1096be7f7e7bb6414f0998b3d974
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3261
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This allows users to configure the number of
connection requests outstanding to an rdma port
at once.
RPC included.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I8a2bb86b2fb7565cb10288088d39af763b778703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3097
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
I had previously implemented a portion of the naming convention
check that looked for symbols that had been moved by performing
two checks:
git diff commit1 commit2 -- libname | grep for added function
git diff commit2 commit1 --libname | grep for added functions
and then subtracting the values returned by the second check from
the values returned by the first check. That works as long as the two
diffs are reciprocal (i.e. the first diff is a mirror image of the
second). However, this has proven to not be the case.
This change fixes that check by performing the smae diff twice and
grepping for removed functions the same time.
Change-Id: I09c81921d68436baeee706f2d9a6d30db1d23976
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3229
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It will except in the middle of creation if an error command inputted.
usrs hope it could stay on consle. So change this.
For example:
'''
SPDK CLI v0.1
/> lsss
Command not found lsss
/>
'''
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ib8d38b5d3f6db1bae965c56e3b78ff715a574189
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2886
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also check nullblock subsystem number.
There was missing subsystem number definition in tgt_start
for null_block tests, and wrong filenames generator in
kernel section.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iae5bc6f497176d6c2a12ab430f4c6c92104fa4a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2570
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make sure that git diff ignores all submodules while looking for
changes made by astyle. This should prevent the following issues
from occurring:
object directory /var/ci_repos/dpdk-submodule.git/objects does not exist; check .git/objects/info/alternates
object directory /var/ci_repos/intel-ipsec-mb.git/objects does not exist; check .git/objects/info/alternates
error: bad tree object HEAD
fatal: 'git status --porcelain=2' failed in submodule intel-ipsec-mb
Change-Id: Ie9a39e324674337fdbd6bf627da6e80775ceaeec
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3223
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is used to enable uring test in some VMs or machines
in the CI pool.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I75c2ad477f5f648289d8dbb344b75b2408d56a38
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3107
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
During perf test we figured out, that global qd
settings is split between disks number in filename.
Setting this parameter (multiplied by section disks number
and numjobs) in filename section give as expected value.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I89a44e48f10da131e2e9128f3ff2fbfb197076ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2749
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Skip copying and building SPDK on host systems if
specified in configuration file.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4f9c0dd77e020dfd866f52dc138526e63dd9222d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3075
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Aggregate separate read/write results into
a single stat. Reduces the number of additional
fields and formulas in spreadsheets when preparing
performance reports.
Change-Id: I5fdab35c1bb69aad98f7b9808885801db0416449
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3068
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Test result IOPS and BW are a sum from across all initiators,
but latencies should be an average from accross initiators.
In previous version it was mistakenly a sum, and that had
to be manually handled in Excel spreadsheets when gathering
data for performance reports.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I17e38e3cdd593dcda9730c19decc2d6a72a11130
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Save each initiator results to a .csv file. Useful
for a bit more insight than aggregated results.
Change-Id: I1fafe52ba78f2c62abfd0e3c863505515a363cd3
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3053
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
This reverts commit 436b9be9d0255bc7a7826afb1b4554b1aee59482.
Reason:
these change makes Vagrantfile rely on env variables (eg. spdk_dir),
which are only set when running scripts/vagrant/create_vbox.sh script.
After create_vbox.sh has finished env variables are not accessible,
but still needed to work with Vagrantfile using Vagrant commands
like 'vagrant ssh' or 'vagrant reload', etc. This results in
configuration errors from Vagrant and scripts being unusable.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I135c42d248c13dfa93c2210dabce49df8116e8f0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3055
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
I suggest putting "make clean" before "./configure". Like Migration-tc3a.sh (spdk/test/vhost/migration):
ssh_remote $MGMT_INITIATOR_IP "cd $spdk_repo_share_dir/spdk; make clean; ./configure --with-rdma --enable-debug; make -j40"
Otherwise, once the configuration is changed, some outdated compiled files may remain after "make clean".
Change-Id: I7300749986129cbfaef44f8ff72fad0449f4e081
Signed-off-by: WANGHAILIANG <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2805
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Allow to specify additional argument which will tell Vagrant to enable
CMB on given nvme drive. The format of the argument is any string which
is then simply converted to plain "true". E.g.
./create_vbox.sh -b "/path_to_nvme_img,nvme,3,true"
Change-Id: I7de55e46491318b082bf4e2165260091b44d60f0
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2725
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes them easier to find. They are now named
spdk_nvme and spdk_bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1f6736d8f7f5b9669583731fb0b710ba54f0d50a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2679
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Automatically place binaries produced from the app directory
into build/bin. This matches with the output in build/lib
that already exists.
Change-Id: I13cd2da71d2f88592e22308fe8a907bf458458b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2379
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This can potentially replace waitforlisten() in our test scripts.
$ ./scripts/rpc.py -h
-r CONN_RETRIES Retry connecting to the RPC server N times with
0.2s interval. Default: 0
[...]
$ ./scripts/rpc.py -r 10 spdk_get_version
<SNIP the usual python exception>
rpc.client.JSONRPCException: Error while connecting to
/var/tmp/spdk.sock
Error details: [Errno -2] Name or service not known
real 0m2.452s
user 0m0.242s
sys 0m0.020s
Change-Id: I204da366360647fcce8f8de0eb25b0f576aabc5b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2751
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In a few tools or languages, slash(/) is maybe a delimiter by default in regex.
An unescaped delimiter must be escaped with a backslash (\).
Otherwise the pattern of regular expression will be error
when delimiter is slash(/) in a few special environment, i.e. in MinGW32 git bash.
Signed-off-by: Dayu Liu <liu.dayu@zte.com.cn>
Change-Id: I73b556416b98e135eb240078dcc68f80e08c5e74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2488
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There was an edge case in this check where a public symbol
definition was just moved and that movement triggered this
check. Going forward, check the diff for symbols that were
both added and removed in the same patch. This indicates a
symbol that was just moved instead of newly added.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I71bbcd6d6b3e0a2133e77c29f4ec7a4f2b09e3c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2765
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Since rdma-core handles the entire libibverbs suite, and because it
dropped rxe_cfg in favor of iproute2's rdma tool, building librxe is
not needed anymore. That said, the functionality of the rxe_cfg that
our test suites are using is basic and useful enough to be preserved
in a form of a simple Bash script. This can be used to avoid full
overhaul of the code which would need to be adjusted for iproute2's
tooling. In case more complex rdma configuration link-wise is needed,
iproute2 dependency can be added then.
Additionally, some of the nvmf functions have been simplified to make
use of the rxe_cfg port.
The formatting of the status cmd is left compatible with the rxe_cfg.
Change-Id: I594a24b73472a16d51401bcd74fd30c415b24ddb
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This parameter describes the number of admin and IO
qpairs while admin qpair always exists and should not
be configured explicitly.
Introduce a new parameter `max_io_qpairs_per_ctrlr`
which configures the number of IO qpairs.
Internal structure of NVMF transport is not changed,
both RPC parameters configure the same nvmf transport parameter.
Deprecate max_qpairs_per_ctrlr in spdkcli as well
Side change: update dif_insert_or_strip description -
it can be used by TCP and RDMA transports
Config files parsing is not changed since it is deprecated
Fixes#1378
Change-Id: I8403ee6fcf090bb5e86a32e4868fea5924daed23
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
It was broken since long ago. --enable-log-bt doesn't change
anything. log.c expects SPDK_LOG_BACKTRACE_LVL to be defined
for backtrace to work, but it's not defined anywhere.
Apparently nobody needs this, so remove it.
Change-Id: I2313fd24198b0bf718663f2eafee9b5c6efa0a7f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2194
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
