When running sock_ut in fedora29 with memcheck, there is an error
"Syscall param sendmsg(msg.msg_iov[0]) points to uninitialised
byte(s)".
Signed-off-by: richael zhuang <richael.zhuang@arm.com>
Change-Id: Iaddb85ed2da2f45e200569c936f05174bc89c99b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If set, SPDK will continue loading the JSON config even if
some commands caused an error. This can be useful when loading
RPC config from spdk_tgt into e.g. bdevperf, which supports
only a subset of RPC commands and would usually fail with
"Method not found" message.
Resolves#840
Change-Id: I070fea862fd99e5882d870e11e6a28dc9d0c8ba6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
The comment in the header file has already said that all associated
I/O channels must be released before calling spdk_thread_exit().
This patch actually checks if it is satisfied in spdk_thread_exit().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56ac50b561c6ca91d3dc2d60c21c8d91d38f081b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/823
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
Change spdk_thread_exit() to return -EBUSY if the thread has any
registered poller. We enforce all pollers including paused poller
are unresitered before the thread is marked as exited.
By this change, a bug was found in reactor_perf test tool. Fix it
by adding spdk_poller_unregister() and add the g_ prefix to avoid
future potential errors.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If7f40357c9a6f4101b3998ea0da3cc46cc435031
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
Change spdk_thread_exit() to return -EINVAL if the thread is already
marked as exited. This will be helpful to detect wrong call sequence
of voluntary thread termination.
Besides, update reactor shutdown and unit test framework shutdown
to incorporate this change accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2296c61e273bf4d9580656dcbc2da0e8a8f3bcf7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/671
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
By the last patch, the asynchronous release of I/O channel will
complete even after spdk_thread_exit() because pending messages will
be reaped.
Then this patch stops new allocation of I/O channel after
spdk_thread_exit().
Hence we will be able to release all I/O channels for exiting
thread within finite time.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I48a45bcba7c4b2c62d8c9d398ac35a584b533627
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
Previously, the exiting thread had discarded all pending mesasges.
We change this to stop accepting any new message in spdk_thread_send_msg()
and reap pending messages in _spdk_msg_queue_run_batch().
Add unit test case for the new behavior. Adding g_ prefix to global
variables for clarification is done together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ida78e7bb1b86357602aea6938dd514897b67edd6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The test case for_each_channel_remove() did not have any
assertion and the count was not incremented correctly.
This patch fixes several issues in for_each_channel_remove()
by counting spdk_get/put_io_channel() and spdk_for_each_channel()
correctly and achieves what we wanted to do in this test case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iceffd924f8887452bd7dad48e30d121874ab0b05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With the recent changes which added usage of writev_async to
both TCP target and initiator, nvme_tcp_pdu::writev_offset
becomes useless since it is not updated in data path. This
field is only used in UT. Remove this field from nvme_tcp_pdu
structure, now nvme_tcp_build_iovs builds iov which fully
describes the PDU. Update UT accordingly.
Field padding_valid_bytes is not used at all, delete it too
Change-Id: I2d6040ae64d6847cb455f59f65ec5677de8e5192
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483374
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_put_io_channel() was designed to be called on the same thread
that called spdk_get_io_channel(). spdk_put_io_channel() sends a
message to its own thread, to allow the context to unwind before
releasing the resources. This had the side effect to allow an
incorrect thread to call spdk_put_io_channel(). This patch will fix
that.
Bdevperf tool had a design flaw that needed the side effect, but
it was fixed recently. We do not know if we have any other case.
Hence add assert to spdk_put_io_channel() to find other case.
We found that unit test for blobstore had called
spdk_put_io_channel() and fix it together in this patch.
Besides, correct the comment for spdk_put_io_channel() in
include/spdk/thread.h not to create any other case in future.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6ec7bf074818abef43b23ca40bc9385adac70a75
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479390
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This internal interface allows to create nvmf ctrlr and connect io
qpairs on add listener rpc request (i.e. when subsystem is stopped
and listener is not yet on subsystem's list).
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I998cb72ed773094faacc6668cf069ba9e2a6bf50
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481409
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Had to remove one part of a unit test because the null
checking is moved to a different function.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I0a95d0a9a9a5708416fdc7efefb36e17b1ffe010
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/480008
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
When attempting to decode a base64 string, while there is a way to
calculate the maximum possible decode length, there isn't a way to
calculate the exact decode length without duplicating some base64
specific logic located in spdk_base64_decode. With this change, the
spdk_base64_decode function can now optionally calculate the exact
decode length without actually performing the decode by passing NULL
in as the dst argument.
Change-Id: Ice83db979f86a6fe9f39d236d3083102ca37ec68
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Extent table and extent page descriptors are now
set to be default way clusters are serialized on disk.
With this patch UT are ran with and without
extent table.
Changed two asserts in test, since amount is dependent on
which type of serialization is used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica58fce6a4effd014d7dd40ee26edd0fa3196d0f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This will be used to add another run of whole UT suite
with extent pages on/off.
Next patch in series will be enabling both types of
extent serialization for all UT.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia8b4b8822edefb90ffc13cf777885f9af95e4545
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482170
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
All the non-ext version of the call is doing, is calling
ext with NULL as opts. Then default opts are used in
its place.
This change was facilitated by next on in series,
where all blob opts will be initalized in UT
with parameter use_extent_table either set to
true or false.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I62b642c1808b38a5f7c94a5900f25f4978a4ec39
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482859
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
A pointer to a stack variable is passed as an argument to
nvme_completion_poll_cb function, later this variable is used
to track completion in the spdk_nvme_wait_for_completion() function.
If normal scenario a request submitted to the admin queue will be completed
within the function which submitted the request.
spdk_nvme_wait_for_completion() calls nvme_transport_qpair_process_completions
which may return an error to the caller, the caller may exit from the
function which submitted the request and the pointer to the stack variable
will no longer be valid. Thereby the request may not be completed at that time
and completed later (e.g. when the controller/qpair are destroyed)
and that will lead to call to nvme_completion_poll_cb with the pointer
to invalid stack variable.
Fix - Dynamically allocate status structure to track the completion;
Add a new field to nvme_completion_poll_status structure to track status
objects that need to be freed in a completion callback
Fixes#1125
Change-Id: Ie0cd8316e1284d42a67439b056c48ab89f23e0d0
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481530
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
After creation of blobs in both tests, only clusters indexed from
0 to 10 are supposed to be used. Index 0 for md and 1-10 for data
of single blob since it was create thick provisoned.
Cluster allocations are done in order so if there was a bug for
overflow amount of clusters claimed, first in order would be
one with index 11.
This patch adds asserts after each bs load for first data cluster
that is supposed to be used and for first data cluster that is
not.
During the tests those should remain constant.
When creating/deleting snapshots, the blobs are affected
by changing their type to/from thin_provisioned.
Added asserts to verify their state at every blob open.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I38418da55850d5b8468e578b3c42c5b817ae8045
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482661
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
g_bserrno from blob deletion or snapshot creation,
should not be checked. It is implementation
dependent whether the error (or success) from those
calls actually means that enough data was persisted
on disk.
This test case should work even if we set the threshold
high enough that no failed opperations occur.
On the other hand some parts of those calls do cleanup
in them, meanwhile there is enough metadata data on disk already.
Such as cleaning up unused clusters or pages issue
writes, but at that point the blobs already are in expected
state.
Thus removed assert for g_bserrno, as failure is not indicative
of impossibility to recover.
While here, removed the spdk_bs_unload(). This UT are for
testing power fail safety. Never should it be the case that
enough writes occured in create/delete, but blobs are not
in the expected state.
When such bug would be introduced, it could be covered up
by spdk_bs_unload() cleanly closing up the blobstore.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic69c3061f2cc1fe04bf895632cdb11efb2fe6912
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482660
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Extent Pages claim and insertion can be asynchronous
when cluster allocation happens due to writing to a new cluster.
In such case lowest free cluster and lowest free md page
is claimed, and message is passed to md_thread.
Where inserting both into the arrays and md_sycn happens.
This patch adds parameters to pass the Extent Page offset
in such case.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I46d8ace9cd5abc0bfe48174c2f2ec218145b9c75
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479849
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If available, automatically use MSG_ZEROCOPY when sending on sockets.
Storage workloads contain sufficient data transfer sizes that this is
always a performance improvement, regardless of workload.
Change-Id: I14429d78c22ad3bc036aec13c9fce6453e899c92
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
With our target design, there's no advantage to sending
multiple R2T PDUs per nvme command. This patch starts by
setting up the math so that at most 1 R2T PDU is required
per request. This can be guaranteed because the maximum
data transfer size (MDTS) is pre-negotiated in NVMe-oF
to a reasonable size at start up.
It then proceeds to simplify all of the logic around mapping
requests to PDUs. It turns out that the mapping is now always
1:1. There are two additional cases where there is no request
object at all but a PDU is still needed - the connection response
and termination request. Put an extra PDU on the queue object
for that purpose.
This is a major simplification.
Change-Id: I8d41f9bf95e70c354ece8fb786793624bec757ea
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479905
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
We can always accept up to the maximum I/O size in an H2C,
so eliminate the #define.
Change-Id: I349dab5f9b6ec482a7c580b1396e03c8d30a250b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482278
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The resources allocated to a queue pair do not need to be directly
correlated to the queue size requested by the initiator in NVMe-oF, as
long as enough resources are present. The RDMA transport, for instance,
does complex pooling of the resources behind the scenes when using a
shared receive queue.
Simplify the resource allocation for a TCP qpair to just always allocate
the max allowed queue size right away. This is a configurable parameter,
so system administrators can adjust for their needs. The initiator may
then request a queue size less than or equal to that, which will only be
enforced by queue depth counting and not impact the actual number of
resources allocated on the target.
This change relies on the MaxC2HSize being equal to the Maximum Data
Transfer Size (MDTS) reported. That is the default configuration, but
MDTS is configurable. Changing the MDTS with this patch to a value
larger than 128k will cause the target to break. This is addressed in
the next patch in this series.
Change-Id: Ibd4723785c6a4d8d444f9b7bbfa89f98de2320f5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479733
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Add call for spdk_nvmf_bdev_ctrlr_compare_and_write_cmd
function in spdk_nvmf_ctrlr_process_io_cmd function
when fused command is discovered.
This patch also removes redundant defines for fused flags.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I61971a56577ab32b52e1fde1e572f718a9a2d9aa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476621
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch introduces new spdk_nvmf_bdev_ctrlr_compare_cmd
function which implements support for compare operation.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iadf402a6441a78ea0e6468f1066c6b0e10e63b9b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477782
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use new bdev aux buf feature. Huge performance benefit for writes.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I5a27460a369ef5f13bf490a287603e566071be41
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478384
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is prepared for the further call back usage.
Change-Id: Iccf304c87e67debfb4e7c330acc9cc233cc3ec48
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481917
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch eliminates the flushing logic and simplies
the writev logic. And this patch can also improve the performance.
We support async write for PDUs other than login response, logout response,
and text response in this patch. We will support async write also for them
later in this patch series.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I243f598f297d594da0bb18466bc47dab918ed3ee
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481686
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Changed write function to be able to work in zone append mode.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I3af98f1d8e69eac6922e19addebabbc6ce847c63
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Handle finish zone management function to zoned block vbdev
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Iffe24572609e741a79b6bb92f72b56cede4906ca
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Handle close zone management function to zoned vbdev
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I001e25a157ba738724012ca366ef901016733944
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468040
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Added handling of reads to a zone; blocks outside of a write pointer
are zeroed out.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Iaf60d6ff74caf9831998862e048446ccd0a0fa3f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468038
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Added handling of write commands, including zone state changes and write
pointer updates.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I576ca18b52474bb299c20296a7561f25e5afa85b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468037
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Add handling of two of the zone management commands for vbdev.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I2868a96d15acbc2d13d18dea405b6d98cb4573d6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468039
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Accept a clear method option on blob create by adding clear_method
to the opts structure passed in to _spdk_bs_create_blob(). Store
these 2 bits in md_ro_flags so that earlier versions without an
understanding of these bits can not alter metadata.
The new metadata values will be used later in the series.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I5440645ca20b426778d13b2e544b65dc2b3b83c7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This commit provides the capability to install a
custom admin command handler for NVMF.
It can be used to implement or replace NVMe admin commands that
are currently not handled by the NVMF subsystem.
The handler implementation is pretty generic and the handler function
has to figure out what to do with the command based on the bdevs
that are configured for the subsystem.
In cases where admin commands need to be forwarded to an NVMe bdev,
the commit provides functions that allow access to the underlying bdev.
There is an example handler in lib/nvmf/custom_cmd_hdlr.c.
Change-Id: I4f9d538c53669c176a836e8bdd379db0070a87dc
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <jacek.kalwas@intel.com>
For the latest QAT devices there are 3 CPMs each with 16 VFs and
2 qp each VF. To load balance for multi-thread operations we want
to assign each new queue pair (QP) on a per CPM (processing module)
basis so this patch assigns the next QP, for QAT, by taking the
last + 32 modulo the total number of QP. This will results in each new
channel getting a QP on the next CPM.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Iea608ada68517b6f2faecd45701c7aae6d23a2d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477082
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Previously one global list of device/qp combinations was used
regardless of PMD and when assigned, the device name was checked
to make sure a matching one was pulled from the list.
Later in this series a patch will make use of having different
lists as we discovered a decent way to load balance QAT but the
implementation with all PMDs on one list was too complex.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I54dfbd0206a881d126831ba27a4ae05cdc6f7c11
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477152
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Update error handling of spdk_nvme_wait_for_completion_robust_lock to
differentiate cases when request is completed (possibly with error)
or polling was aborted by transport/device error
The function returns 0 on success, -ECANCELED if transport/device
error occurred and -EIO if the request is completed with error
Change-Id: Ibf7f3c330317af0d8f27ba9cd10d8b773f6a796b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481529
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
