The 4 different RPC commands to create Virtio bdevs
have been unified to a single, yet another RPC command
in hopes the previous ones will be eventually removed.
That happened in 18.07 and now in order to remove the
old ones we mark them deprecated.
The unified RPC command was introduced in 18.07 and
has already replaced the old, separate RPCs in our
test scripts some time ago.
This patch also removes the old RPCs from doc/bdev.md
and while here, rephrases the Virtio section a bit to
make it more readable after some alphabetization
changes from the past.
jsonrpc.md already described the old RPCs as about to
be deprecated, so there are no changes required in
there.
Change-Id: I77ebf2dde56b1f4a6e4090ed76de16a97310c1c5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Most to-do items in lib/bdev/iscsi/README have been
done a long time ago, leaving this file greatly outdated.
It is removed now and the iSCSI bdev description is
added to doc/bdev.md.
Since most of the to-do items have been done, this
patch also adds a CHANGELOG entry announcing that
iSCSI bdev is no longer in experimental state.
Change-Id: I186c9e1489547152655e1e036b27ab6bc17fcf11
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If raid bdev creation failed, the bdev still be configuring and not
register it. For those raid bdev, raid_bdev_remove_base_bdev() should
cleanup them as well.
Change-Id: If2eda8ec80e7fdeb5e551fafe57a43a27ae0f9e6
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/427331
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously, the difference between configuring and offline is
unclear, this patch just fixes it. The key difference should be
whether the raid bdev have ever registered. Offline is registered
before but unregistered now, and configuring has never registered.
According to the above, we should never set configuring raid bdev to
offline because it never got registered.
Change-Id: Id44ef6654e032993ffb8444e7e7ae3e43a9b0f16
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/428321
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch sets optimal_io_boundary to cluster size, so that splitting
happens in bdev layer rather than blobstore layer.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I0230cb4a188d605845a709e9c3c9061e822ef0f5
Reviewed-on: https://review.gerrithub.io/428065
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Initiailize fields later assumed to be NULL
Change-Id: I61e054dd275c6c04fb3f826adc445e56f0add331
Signed-off-by: shahar salzman <shahar.salzman@kaminario.com>
Reviewed-on: https://review.gerrithub.io/428304
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96b5410a92f176aef11e00829fdebd36910ac2d4
Signed-off-by: shahar salzman <shahar.salzman@kaminario.com>
Reviewed-on: https://review.gerrithub.io/428302
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Large read I/O will be typical in some use cases such as
web stream services. On the other hand, large write I/O
may not be typical but will be sufficiently probable.
Currently when large I/O is submitted to the RAID bdev,
the I/O will be divided by the strip size of it and then
divided I/Os are submitted sequentially.
This patch tries to improve the performance of the RAID bdev
in large I/Os. Besides, when the RAID bdev supports higher
levels of RAID (such as RAID5), it should issue multiple
I/Os to multiple base bdevs by batch fasion in the parity
update. Having experience in batched I/O will be helpful
in the future case too.
In this patch, submit split I/Os by batch until all child IOVs
are consumed or all data are submitted. If all child IOVs are
consumed before all data are submitted, wait until all batched
split I/Os complete and then submit again.
In this patch, test code is added too.
Change-Id: If6cd81cc0c306e3875a93c39dbe4288723b78937
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/424770
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
according to commit:
bdev: add spdk_bdev_queue_io_wait
This patch will make io_wait to support gpt
Change-Id: I73795756f232f1b596b65ecbc7e3ba4d990c9fe0
Signed-off-by: Ni Xun <nixun@baidu.com>
Signed-off-by: Li Lin <lilin24@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Reviewed-on: https://review.gerrithub.io/428338
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When destroy qos, spdk_bdev_qos_destroy() allocates a new qos, and swap
old one. After spdk_bdev_unregister() frees the new qos, the old qos poller
may still reference new qos via bdev->internal.qos. Fix this error by
using old qos in _spdk_bdev_qos_io_submit().
Reported in 72aac51430.1539054028/ubuntu16.04/build.log
Change-Id: Id1bce6c8b1cefae604dd2c69e8f3482ec34b1b54
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/428444
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This prevents the SPDK build from requirng unnecessary dependencies when
not compiling certain features. Also, fixes github issue #434
Change-Id: I7d0520474f3656ae32670313f2290e6b741c5ca8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/426131
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added reminder to build with the iscsi configuration option.
Change-Id: I1e4e325394368f2bc3462761a3793f4b0edb065c
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/428397
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch added the support of RPC method to enable,
adjust, disable the bandwidth rate limit on the bdev.
And it can work together with the existing IOPS rate limit.
The RPC method has been consolidated to support both IOPS
and bandwidth rate limits as below:
usage:
rpc.py set_bdev_qos_limit [-h]
[--rw_ios_per_sec RW_IOS_PER_SEC]
[--rw_mbytes_per_sec RW_MBYTES_PER_SEC]
name
positional arguments:
name Blockdev name to set QoS. Example: Malloc0
optional arguments:
-h, --help show this help message and exit
--rw_ios_per_sec RW_IOS_PER_SEC
R/W IOs per second limit (>=10000, example: 20000).
0 means unlimited.
--rw_mbytes_per_sec RW_MBYTES_PER_SEC
R/W megabytes per second limit (>=10, example: 100).
0 means unlimited.
Change-Id: I9c03cd635280add01801a81c6a6c02f0cf85bee1
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/416511
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
scan-build requests to check the size of parent iovec by using
artificially large LBA in unit tests.
Fix the error by using not pointer but position and checking if
position is less than count of parent iovec.
Change-Id: I74c4f6d1b68ecfca93e9247acc5ac6bd5412a960
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/427965
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Patch 427539: Check file permissions in the check_format script
introduces at least two errors.
- exit too early from check_format.sh
- wrong file permisions on file vbdev_crypto.c
This patch fixes them.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I346523bce7448e749471bd78a06e9233e0d35ef2
Reviewed-on: https://review.gerrithub.io/428188
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
according to commit:
bdev: add spdk_bdev_queue_io_wait
This patch will make io_wait to support bdev_split
Change-Id: Ie5c57db3fbd9e777f69daf65b080f2659d85032a
Signed-off-by: Ni Xun <nixun@baidu.com>
Signed-off-by: Li Lin <lilin24@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Reviewed-on: https://review.gerrithub.io/426649
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
And add newline at the end, by the way.
Change-Id: I0b3b72c066e5bb161d9e7212367c8ff663a95b27
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/427330
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also fix options that doesn't start with CONFIG_ prefix.
Change-Id: I32a24373328bab8f513d56c0c09b5a86589f690c
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/427767
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In the crypto examine function we first try to claim the bdev
that's presented. If the claim fails, we were returning
immediately which was incorrect because the examine function needs
to look at the entire global list of vbdevs.
The scenario that caught this was testing a duplicate underlying
bdev name in the conf file. In that case, before this fix, the claim
on the first crypto bdev worked but on the second it failed so the bdev
layer never added the good one to its global list so on exit it would
try to remove the crypto vbdev from the list but it was never added
(because it gets added when registered which we were bailing so soon
before that it never happened).
Addresses github #448.
Change-Id: I4e9ff9649101eb7caccfb33c2d1961921909555a
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/427559
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Don't think this matters functionally but can be confusing in
debug, was using the name of the underlying bdev for the name of
the io_device we're registering. Change to the name of the vbdev
instead.
Change-Id: I1f0eb39352f2da79db5d8021f8f0ec9800ae7648
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/427560
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Each file that need to check SPDK_CONFIG_* options need to include
spdk/config.h explicitly.
Change-Id: If9f2a91ac4c2b1a300dcf88ec3e2a12714ad344a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/427221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch is to introduce the specific QoS related structure
and the enumeration for types of QoS rate limits. Later new
types of QoS rate limits can be supported easily.
Change-Id: Idb8d2e7627fd145bf2b0ddb296c968b6b068f48c
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/424459
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Performance testing shows much better CPU scalling with FIO as
DPDK will no longer take multiple locks with each loop. Instead,
just 2 at the end to perform the bulk returns.
Change-Id: Ie4d556264302f01c2a9498be83b7bccbaf16b287
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/427158
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently write to bdev fails in _spdk_bdev_write_zero_buffer_next
due to other than -ENOMEM, assert is called.
RAID bdev using this feature is generally availale now and it will be
OK to remove this assert and return error instead.
Additionally, applying the factored function to _bdev_write_zero_buffer_next
will improve readability slightly.
These two changes are done in this patch.
Change-Id: I462630a71e57e2e5146b085b215d62a378ea9402
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/427186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch factors out that operation into a function and adds
error handling to that operation to improve readability slightly.
Change-Id: Ic24df0c0a9abbebc38d30fc17779dc5a5f6138a6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/427026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Currently when read/write to bdev fails in _spdk_bdev_io_split_with_payload
due to other than -ENOMEM, assert is called.
RAID bdev that utilizes the split IO feature is generally availale now
and it will be OK to remove this assert and return error instead.
Change-Id: I6ea6fd45b94bff0ea84e498e0c4dfd1dd31e0260
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/427025
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a bdev IO is split, if iovec size in a strip is more than 32,
the IO will fail.
Remove the limitation by spliting the split IO further.
Change-Id: I962ad86dfe63ea1fcd86ffa52ead7452fb80e53d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/425876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When adding RPC support, did some refactoring and totally missed
error handling in the claim function. This patch adds it.
Addresses github issue #445≠
Change-Id: Ie2df279af7bfa3660a4a9fe2fd8bcbf7b5fd07fd
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/427170
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Readability changes in _crypto_operation() as suggested in a previous
review.
Change-Id: I8e71be297ae42d78e5c98302838625b80f319848
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/426598
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Somehow I ended up with x permissions on some source files,
maybe copied them to a windows box or something, don't know..
Change-Id: I2c40d9fa0094a3ae56332ce165750f1fcc644b15
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/427276
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously was only checking the crypto driver name in the conf
file parsing and not when it came in via RPC so a bogus name
could result in nasty stuff. Moved the check to the common
function used by both paths so a bad name will fail gracefully.
Addresses github issue #444
Change-Id: Id881d9d448d0bb6935162484154964a1d5d59a0b
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/427164
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
* fixed typo in comment
* cleanup up some current_len logic that was no longer needed
after changing to LBA as IV
* moved a few src_mbufs assignments so they are grouped together
for easier reading
* updated vbdev_crypto_io_type_supported() to positively decode
supported IO types
* updated vbdev_crypto_dump_info_json() to use json _named_* API
Re-tested with overnight bdevperf OIO 1...256 sizes 512..65536
as well as bdevio and fio (basic multi-threaded tests)
Change-Id: I86fa177927ce61d12c86d352b00d850ffa878929
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/425994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most vbdevs have complete test suites that include rpc calls
to set them up and teare them down. With crypto there's not
a lot to do w/test other than make sure it's configured and
run IO so right now that amounts to tools that use a config
(ini) file. Adding create/delete calls here to get basic rpc
coverage in CI.
The fixes/udpates in the vbdev module and the .py files were
fixes found in enabling testing of the rpc calls.
Change-Id: I5d7d25e1c96dcf76e0055f23d27781b858e290b0
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/425875
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To achieve its goal, this patch changes the order
in which bdev modules are finished. All modules
that examine bdevs (e.g. lvol,split,...) will be now
finished last. It should not cause any issues though,
since all bdevs are already removed at the time when
any module finish is called
Fixes#387
Change-Id: Id60c375eb5c3d7306b69cdce86bded77354868d8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/421158
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add dump the current configuration of raid bdevs to the specified
file for .INI config file.
.INI config file will be deprecated but this addition will be helpful
for now.
Change-Id: I35582ceaff18d81b066e3e63e0c8c22525ec6b9e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/426299
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This part was duplicated but was not removed during refactoring caressly.
Additionally, the variable iter was not changed to the single character
variable i too.
Fix them in this patch.
Change-Id: I1e026434ce48e9e8d492a3aa772c3be6df0b1d37
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/425528
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The type of the second parameter `success' of spdk_bdev_io_completion_cb
is bool. Hence change the code to use bool type success or failure.
Change-Id: I9e93f4ccbb085e8e184f209e706915dcd34aa966
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/426648
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
according to commit:
bdev: add spdk_bdev_queue_io_wait
This patch will make io_wait to support vbdev_passthru
Change-Id: I282b52a7dc0e0fdbfe79e570b0c6a84b01c390ea
Signed-off-by: Ni Xun <nixun@baidu.com>
Signed-off-by: Li Lin <lilin24@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Reviewed-on: https://review.gerrithub.io/426163
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The function spdk_bdev_part_io_type_supported() internally invokes
io_type_supported() as provided in the base bdev's function table.
This function should be called with the base bdev's context instead
of the bdev itself.
Change-Id: I5fbda0521f05b86dd81725614c5e45ee170cd8f5
Signed-off-by: Wael Halbawi <waelhalbawi@gmail.com>
Reviewed-on: https://review.gerrithub.io/426306
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We kept this disabled by default originally because it lacked
multiple iov support needed for vhost and nvmf in-capsule data.
Now that support has been added, there is no reason to not
enable it automatically - it has no extra package dependencies,
so requiring users to specify --with-raid to configure is just
an extra unneeded step.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia9796370e12a6f93993e70083de36114a37851bd
Reviewed-on: https://review.gerrithub.io/426003
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It was writing TransportId (lower-case d) instead.
While here, fix similar issue in etc/spdk/nvmf.conf.in.
lib/conf uses strcasecmp(), meaning TransportID and
TransportId are effectively the same, but it's better
to reduce confusion and just use the same in all places.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2996ba46a5c2a239650e841d5b57424ff00f47e6
Reviewed-on: https://review.gerrithub.io/426001
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
rpmbuild pointed out that this is wrong to have executable files without
shebang. Taking the opportunity and fix this for other files too.
Change-Id: Ib21f436672150edc0aff511bff2eb6839870cf79
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/425382
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Initial support for softare AESNI_MB DPDK driver only.
Have tested (both aesni and QAT seprately and concurrrently) on underlying NVMe devices
with bdevio and a bdevperf script that runs IOs from 512B to 128K each with Q depths from
1 to 512 in powers of 2 for 30 seconds each run.
QAT can be included in the code (but not makefile) and marked as experimental
until we are ready to test in CI. It works well on 2 systems but is a big PITA to get
the hardware setup and configured for use with DPDK (IMHO).
Change-Id: If518c3df8e74e00efa18afdf194824c5e69778fc
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/403107
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I0276528c360874eefa7f2f1ecb8a35fa57cee669
Reviewed-on: https://review.gerrithub.io/425357
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We do not need to split I/O to single base bdev
RAID, since strips do not really apply.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0fa741f627b5aeb15d2ab19365afac4f48248654
Reviewed-on: https://review.gerrithub.io/425322
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
These new names are a bit more clear after some of the recent
I/O splitting changes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibe265ca2f969ee1058316c519e5d679861e03713
Reviewed-on: https://review.gerrithub.io/425321
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The bdevio tests will now work on RAID volumes, so enable
RAID testing there too.
It is probably safe now to just build RAID by default, and
not require --with-raid - but let's do some more testing
with vhost and NVMe-oF against it first before we do so.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I15697f035cb688574a7ecb8be24d0c84fc622d83
Reviewed-on: https://review.gerrithub.io/423408
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
