The function didn't do anything.
Change-Id: Id44a7d0c129ab60751eda382911935d677730ec9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As spdk_jsonrpc_begin_result() is not allowed to return NULL we can
remove these checks. We didn't have any tests cases that goes this path
anyway.
Change-Id: I0894e76c0162591e550e70b172566b9060a6dd5f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We should return for the registrant case when the reservation holder
exists.
Change-Id: Ie3cf31554eafdad03294aef2eeb6eaef1536b8c3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch uses the change by the last patch to initialize DIF
context in SCSI layer. Besides this patch changes the name of a
parameter from offset to data_offset to clarify the meaning.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I54bf1168ec5959432aa15dae0360c0640138b033
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Data offset are intended to correspond to DATAO in NVMe/TCP and
Buffer Offset in iSCSI.
Previously for iSCSI, buffer offset had been merged to start block
address, but passing buffer offset separately from start block address
clarifies the logic more.
On the other hand, for NVMe/TCP, passing DATAO separately from start
block address will be critically important because DATAO will bave any
alignment and will be necessary to use for not only reference tag
but also guard computation.
This patch adds data_offset to struct spdk_dif_ctx and adds it to the
parameters of spdk_dif_ctx_init(). ref_tag_offset is also added to struct
spdk_dif_ctx and it is computed by dividing data_offset by data_block_size
and is used to compute reference tag.
The next patch will use this change when getting DIF context in SCSI.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0e12ca9b1dc75d0589787520feb0c2ee0f844a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Vhost-scsi target will not set task's initiator port parameter,
so reservation commands sent from Guest will cause segment fault.
Change-Id: Ifc175effded5371eca08d5bfe7e4aa977dd4b1c6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457550
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
All the SCSI commands have two states: allowed and conflict,
based on different reservation types and I_T nexus, the SCSI
module will check each commands before sending to the backend
device.
Change-Id: Ib05cece1c237873360f85c68d139362200d2d47e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Hotremoving a bdev exposed as a vhost-scsi LUN which
has an allocated io_channel is broken now. By detaching
LUNs from their SCSI devices at the start of LUN
hotremoval, we can end up with the LUN's descriptor
completely leaked.
Upon hotremove, each LUN fires a hotremove_cb to the
upper layer (iscsi/vhost) and starts a poller to
periodically check if lun->io_channel has been closed
already. While iSCSI allocates and frees io_channels
for particular LUNs separately using
spdk_scsi_lun_allocate_io_channel(), vhost allocates
and frees io_channels for the entire SCSI device using
spdk_scsi_dev_free_io_channels(), as it knows there's
only one LUN per SCSI device.
Since LUNs are removed from SCSI devices at the start
of LUN hotremoval, the spdk_scsi_dev_free_io_channels()
is not able to close the io_channel of the child LUN.
That LUN is no longer referenced there, and the function
returns immediately without any error.
By reverting this patch, we practically defer removing
LUN from SCSI device until the bdev descriptor is closed,
that is, until that spdk_scsi_dev_free_io_channels()
and the subsequent spdk_scsi_dev_destruct() in vhost
is called.
Historically, spdk_scsi_lun_free_io_channel() was
introduced after vhost-scsi already supported hotremove,
so before we can introduce a change like this one we
have to refactor vhost to use the new APIs first.
This reverts commit 497997bc60.
Change-Id: I58a9988a22694f5b5b927173098ac8218270462e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A PERSISTENT RESERVE OUT command with PREEMPT service action action is used to:
a) preempt (i.e., replace) the persistent reservation and remove registrations; or
b) remove registrations.
Change-Id: I906b09057e5ddef0ea2fe180bb5fff6e9e0a04f6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436092
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Any application client can release the persistent reservation and remove all
registrations from a device server by issuing a PERSISTENT RESERVE OUT command
with CLEAR service action through a registered I_T nexus.
Change-Id: Ie21885f7f9632b9da77e877fbce7c51b2e0b47a7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436091
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
An application client releases the persistent reservation by issuing a
PERSISTENT RESERVE OUT command with RELEASE service action through an
I_T nexus that is a persistent reservation holder. The RELEASE service
action will release the persistent reservation and do noting to
existing registrants. Unit Attention isn't supported by SPDK so here
we will not establish any unit attention condition.
Change-Id: If0df3b3fc4e89ffa78d827e2b31cf5c61aa149db
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436090
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
An application client creates a persistent reservation by issuing a
PERSISTENT RESERVE OUT command with RESERVE service action through
a registered I_T nexus with RESERVATION KEY and TYPE, and persistent
reservation has a scope of LUN, only one persistent reservation is
allowed at a time per LUN.
Change-Id: I052d0ddd439dd9994c0793218dd5c5d6ed176d2c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436089
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To establish a persistent reservation the application client shall first
register an I_T nexus with the device server. An application client registers
with a logical unit by issuing a PERSISTENT RESERVE OUT command with REGISTER
service action or REGISTER AND IGNORE EXISTING KEY service action.
Specify Initiator Ports (SPEC_I_PT) bit and All Target Ports (ALL_TG_PT) bit
are not supported for now, the registrants belong to the I_T nexus who sends
the command.
Also Activate Persist Through Power Loss (APTPL) bit will be supported in
following patches.
Change-Id: If057a764a4bfa73017f98048c94b697dbfa4b4a1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436088
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The new, simplified scsi lun hotremove path doesn't call
lun->hotremove_cb if there's no io_channel allocated for
that lun. Vhost still depends on that callback and currently,
when the underlying bdev is removed, vhost is left completely
unnotified. It keeps a dangling pointer to a scsi lun and
will eventually crash. The vhost scsi controller also can't
be removed in this case.
This reverts commit 19182431c8.
Change-Id: I330330fdd7d6941db070d972192481f535f62977
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Both for vhost SCSI and iSCSI target, IO channel is allocated to
LUN before using it. Hence LUN is not used by anyone if IO channel
is not allocated to it. So we can call scsi_lun_remove in this
case.
Change-Id: I6881a5e075ed6ef11802e1b166dfb3f35531d100
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We have observed unexpcted timeout when we remove LUNs from the
active iSCSI target dynamically during FIO workload.
By making destroy_raid_bdev RPC wait for its completion, we could know
the destroy_raid_bdev RPC caused timeout because LUN hot removal didn't
complete.
By investigating the log, incoming I/Os from the host had not stopped
even after hot removal process was started.
The reason was that iSCSI target had continued to accept incoming I/Os
from the host.
By removing LUN from the SCSI device at the start of the LUN hot removal
process, iSCSI target will be able to stop incoming I/Os and LUN hot removal
will complete in finite time.
LUN itself can be accessible even after it is removed from the SCSI device.
LUN hot removal is for not I_T nexus but I_T_L nexus and so we cannot
start connection exiting in this case because connection can have multiple
LUNs. So this fix requires few changes and will be practical.
Fixes#715
Change-Id: I17d7a1f6c6557297289c3bd148a62db46da48ec5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453959
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This was not used by any of the trace register descriptions.
Let's remove it rather keeping it around if we don't need it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idda809e2911db5be555ff6aa13695484a14bf665
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
spdk_dma_malloc() is not required here, as the buffer
is neither DMA-able nor shared between processes.
The buffer is used to store the scsi response as it's
prepared. At the end it's always memcopied to possibly
multiple DMA-able buffers in the scatter-gatter list
provided by the upper layer.
Change-Id: I92fcede67dc24c532b13399f6364b071b2aeeb56
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the end of the patch series. After this patch,
delete_target_node RPC will wait for the completion of
removal of the SCSI device and then free the iSCSI target.
SCSI device holds passed callback and calls it in free_dev().
free_dev() is ensured to be called after all iSCSI sessions
are closed. So iSCSI target resource can be freed safely
after that.
Change-Id: I25921b4014207092b7b3845dfeae58bcdffa2edc
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450607
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The next patch will add the function ponter typedef
spdk_scsi_dev_destruct_cb for SCSI device destruction.
Hence add lun to the names of descriptors and callback for SCSI
LUN for clarification.
This patch doesn't change any behavior.
Change-Id: I73f2bce9129f7a6f16770ab6ed18428b16589108
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450883
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This case was zeroing the entire structure - overwriting
the peripheral and page_code data already set. Don't
bother zeroing the alloc_len either - we'll set that
later in this case statement.
Fixes issue #750.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b7c6f954b5e3c85ddfaf801d64dd4a501f50cd2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450922
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SPDK iSCSI target didn't convert LUN ID from integer to structure
when it sends R2T PDUs. The next patch will fix the issue. Introducing
helper functions into SCSI library and using them will be clean. Hence
this patch adds two helper functions to convert LUN ID between structure
and integer.
The logic of helper functions is derived simply from the current
implementation in SPDK.
Change-Id: I114b546cfcb44109d6cd131a1fa972f4d6bfea38
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds an API spdk_scsi_bdev_get_dif_ctx().
spdk_scsi_bdev_get_dif_ctx() decodes opcode in CDB, and if opcode
is read or write block commands, it gets LBA and use the lower
32bits of LBA as Reference Tag. It gets DIF information from
specified bdev next. Then it sets all to DIF context and return.
spdk_scsi_bdev_get_dif_ctx() is exported to iSCSI through
spdk_scsi_lun_get_dif_ctx().
Change-Id: Id8aac164c48e9e9d4ff7cfc9fa81bb5090f3e187
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446224
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
SPDK iSCSI and SCSI target don't expose any metadata and DIF settings
to the corresponding iSCSI and SCSI initiator.
Even when SPDK iSCSI and SCSI target allocate any bdev formatted
with DIF, SCSI commands sent from iSCSI and SCSI initiator don't
have any metadata and DIF information.
For that case, iSCSI target inserts and strips DIF on behalf of
iSCSI and SCSI initiator.
Hence SPDK SCSI target has to use data block size not including
metadata to process SCSI commands correctly.
This patch replaces spdk_bdev_get_block_size by
spdk_bdev_get_data_block_size in necessary places.
Change-Id: I264c8e532d1d1b016f6d8774c8ec03389528044f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In this patch series, spdk_bdev_scsi_read and spdk_bdev_scsi_write
became almost identical. Hence squash them into spdk_bdev_scsi_read_write.
Change-Id: Ibbaddf74c1bf2dac37a0133eac27086af650a061
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is in a effort to consolidate SCSI read and write I/O
for the upcoming transparent DIF support.
Previously conversion of bytes and blocks are done both in
SCSI layer and BDEV layer. After the patch series, conversion is
consolidated into SCSI layer.
Change-Id: Ib964a41ec22757f2a09cea22f398903f78d0781f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is in a effort to consolidate SCSI read and write I/O
for the upcoming transparent DIF support.
Previously conversion of bytes and blocks are done both in
SCSI layer and BDEV layer. After the patch series, conversion is
consolidated into SCSI layer.
About conversion from bytes to blocks, we don't expose bdev API
spdk_bdev_bytes_to_blocks and but create private helper function
_bytes_to_blocks because we will use not block size but data
block size when we support transparent DIF feature.
Change-Id: I37169c673479c92e027e2507a0e54a1e414b43e1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444778
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The last parameter xfer_len of spdk_bdev_scsi_read is not used,
and of spdk_bdev_scsi_write is used only to check task->transfer_len.
Hence remove the last parameter xfer_len from spdk_bdev_scsi_read/write
and extract the check operation from spdk_bdev_scsi_write and insert
it into spdk_bdev_scsi_read_write.
Additionally, remove a debug log because xfer_len is not passed to
spdk_bdev_scsi_write anymore. Hopufully, this will not degrade any
maintainability.
On top of this, factoring out the operation to convert byte to
block in spdk_bdev_scsi_read/write be done.
Change-Id: I35faca269a9c4a7f15d27e8e61b6a1b809a36b3f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444776
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
It is perfectly valid for a bdev to not support the
unmap command - there's no need to print an ERRLOG
when a SCSI INQUIRY 0xB2 (LOGICAL BLOCK PROVISIONING)
command is sent to query if the LUN supports it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I18389df4d55a1ac186707d624ddea292a5470e80
Reviewed-on: https://review.gerrithub.io/c/442104
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
By subsequent patches for iSCSI, spdk_scsi_dev_queue_mgmt_task()
will not be called directly from the function that knows TMF code,
and currently setting TMF code to SCSI task is done in
spdk_scsi_dev_queue_mgmt_task().
Hence after subsequent patches for iSCSI, to hand off TMF code to
SCSI task, any dynamic context will be required.
To avoid the dynamic context, extract setting TMF code from
spdk_scsi_dev_queue_mgmt_task() and put appropriate place for
each call of spdk_scsi_dev_queue_mgmt_task().
Additionally, in spdk_abort_transfer_task_in_task_mgmt_resp(),
ref_task_tag is got from PDU but getting it from SCSI task is
much easier. Hence get ref_task_tag from SCSI task in the callback.
Change-Id: I7add9290598d2df7cfcf1506ec75d74c70c0f236
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Subsequent patches will have to abort SCSI tasks in the iSCSI
layer. But spdk_scsi_task_set_status() API is not public API.
spdk_scsi_task_process_null_lun() is existing public API but
LUN NOT SUPPORTED is not appropriate for those cases.
Hence add an new public API spdk_scsi_task_process_abort().
Change-Id: I5b488e902ccd790ace2936b3e6ebfeb124fa429a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436080
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next patch will add scsi_task_process_abort to task.c for
proper task management functions. scsi_task_process_null_lun
doesn't use struct spdk_scsi_lun and having both in the same
file will improve maintainability.
Change-Id: I6fd91aad84e62d14ecb7b44794db391a82cb4b12
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
IO submissions to backends have to complete first in LUN reset.
Previous patch makes the waiting time limited.
LUN reset don't use timeout for now because even if LUN reset reports
timeout, error handling of the initiator will be escalated and the
initiator will issue stronger command and will wait eventually
until all outstanding tasks completed.
Besides, not using timeout in LUN reset will make implementation simple.
If timeout becomes necessary, I'll do it in the separate patch later.
Change-Id: Ie9e4502068c19b1727ea65dc773ddf08cedec7c4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Submission queue deleted by https://review.gerrithub.io/393911
is necessary to support proper LUN reset.
Hence revert the removal in this patch.
And using the submission queue, suspend IO task submission during
LUN reset to limit completion time of LUN reset.
Change-Id: I3cdc4f0165fe845637112c2900407d6b4a09df79
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434765
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Task management functions don't require performance. Serializing
execution of task managment functions will sipmlify and stabilize
the logic and will be helpful for upcoming patches to support
other task management functions.
This patch introduces two queues, pending and submitted queue,
and serializes LUN reset exection and makes LUN hot removal
wait for LUN reset.
Besides, checking if LUN is NULL is moved to the upper layer as
same as IO task submission.
Change-Id: Ia0cf3f437a745ee70fc9b17744cc63c833690dda
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434764
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Current SPDK SCSI supports only LUN RESET in task management function.
Upcoming patches will support other functions too but differentiate
the callback function about LUN reset from other task management
functions for now to avoid misunderstanding.
Change-Id: If8f00ce413fbcc54b12dd885cbf01597f83a2af9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434763
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to the next patch.
Change-Id: Ia7af66ba129a4666730f94be64d3699cded65e09
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434762
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SCSI persistent reservation feature need to get the TransportID
for the I_T nexus, so when creating initiator port we also
set the TransportID according to the specification, while here,
we use the format code 0x1 for the TransportID.
Change-Id: Ib45bec04bf0e33e2b0f611dd3846597f4176d069
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/435212
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Previously, if want to know which mask bit is used for specific
trace group, the only way is to check source code. Now list
each trace group with its trace tpoint group mask bit in
usage message
Change-Id: I7a85fe9c0885f1919f6ffbdc97dab81f1986fb07
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/435448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Althrough it has very small chance to be executed, it's nice
to have it fixed.
Change-Id: I899681ccc13ed59c7fdd343ef7791df4e69e490f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/433976
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
