Allow pollers to be scheduled to be run periodically every N
microseconds instead of every iteration of the reactor loop.
Change-Id: Iaea3e98965d81044e6dc5ce5f406bcb7a455289e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Combine the necessary functionality with the main bdev file.
Change-Id: I96d796bc87ac2a8688cdf1fd3c16d2a7c8aef730
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
We reported virtualized NVMe devices through NVMe over Fabric specification,
with 1.2.1 NVMe version. For direct mode, the NVMe device maybe has lower
version, such as 1.0, the identify namespace list can not support in those
devices, so we need to add helper function here to simulate such commands
from initiator.
Change-Id: I226f4f34bf61017f538d2dd80332f1d054a501f1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
No need to do read and writes plus verify - the verify is
a read itself.
Change-Id: I28d08717e49b1327b04490810f8e6069504173c2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a much simpler approach and is only slightly
less efficient.
Change-Id: I909de376d576a74156c1be447e90e7dbc240f025
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These can be simplified and merged into the subsystem.
Remove the concept of mappings from subsystems and replace
it with a list of hosts and ports. The host is optional -
not specifying a host means any host can connect.
Change-Id: Ib3786acb40a34b7e10935af55f4b6756d40cc906
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change the Port configuration file entries to a new format:
[Port1]
Listen <transport> <address>:<service>
Initially, this still only supports RDMA, but the new format will allow
specifying other transports once they are added.
Change-Id: Iadfd19b91db57b571064379368dbe77204ccecbb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMf target is being refactored to split the RDMA transport-specific
code into its own file. Once this is complete, we should be able to
plug in other transports and build the NVMf target without any RDMA
dependency if desired.
To enable this, change the CONFIG option to RDMA; it still controls
whether the whole NVMf target is built for now, but once the RDMA
dependency is actually made optional, we will be able to build the
generic NVMf target code without libibverbs installed.
Change-Id: I8cd90a9aaa85dcefcc9b0f8f2e7b6af21958b2a8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This never really made sense, so replace it with a list of
subsystems.
Change-Id: Ie7a9400083c091ac7142d01c23948200f515bdf7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is just extra complication for no real benefit.
Change-Id: I528af98e799d0641e753390fe35ff561fa3d7d76
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a bit heavy handed, but really make sure all
activity has ceased.
Change-Id: Iaa1ce16fd9e059f9eaec6712226344d69075b243
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
There's no benefit of reloading the NIC drivers (unless the drivers
themselves are buggy), so save some time by skipping the rmmod of
drivers we are about to load.
Change-Id: I05c3fd06042a2e06333d0cac123d24e6cce65b23
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Only nvme-rdma should be loaded as part of the NVMf testing.
Change-Id: I232363bf0988ea9bd99a37df27c39cc8e9732ad5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Inline function that is only called once.
Fix == bashism.
Create the filesystems on the partition created by parted rather than on
the raw namespace block device.
Add 'sync' invocations to make sure data gets flushed to the block
device we are testing.
Drop the copy-pasted FIO cleanup code (filesystem test does not run
FIO).
Change-Id: Id47d68db208a618841291c4184824031476268f1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Multiple NVMe controllers within a subsystem does not work correctly,
since we would need to virtualize the controller data, namespace IDs,
and so on. For now, only allow pass-through mapping of a single NVMe
controller per subsystem.
Change-Id: Ib2d3576d2856c46a086f38eb6bec56f3e7a73575
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we used cap_lo and cap_hi to represent the 32-bit halves of
the full CAP register. However, it is simpler to keep them in a single
64-bit structure, and is no less efficient on 64-bit platforms.
Also name the NSSRS field from NVMe 1.2, which was previously reserved.
Change-Id: I1d5d9b0dccbb12373b4aed3db29c883881d43223
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the path to the executable shorter so it fits in the coredump.
Change-Id: I651c6cb4bd37fea51dd8e39b47a97c4edeace22f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure the reactor mask in profile take effect.
Change-Id: Ia471b2b88a711f05738cf93068c4f3a8c9a3039d
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
There is a sporadic error mounting ext4. Enable
tracing to attempt and catch it.
Change-Id: I8cb8425cbd076add0676064fccce66fdd4531b19
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
4420 is the officially assigned IP port from IANA for NVMe over Fabrics.
Change-Id: I433a5ed0780d1ffd7ca6512617759d59fa5e8def
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
NVMe over Fabrics defines its own NVMe Qualified Name (NQN) format; it
does not use iSCSI Qualified Names.
Also change the default node base for nvmf_tgt to "nqn.2016-06.io.spdk".
Change-Id: I2b73c1426ef1d8c83cc2df499d79228ea61257cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will allow removal notifications to be propagated to the library
user (e.g. for hotplug).
The callback is currently unused, but this at least prepares the API for
the future hotplug support.
Based on a patch by Dave Jiang <dave.jiang@intel.com>
Change-Id: I20b1c2dbf5e084e0b45a7e51205aba4514ee9a95
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the knowledge that both the source and destination of
nvme_copy_command() are aligned to emit the aligned variants of the
SSE2/AVX mov instructions.
Change-Id: I0a7e32a3bb10b9a1920cd85691b79fa7172eecb3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Match the expected alignment for nvme_alloc_request() and nvme_malloc()
to allow optimized memory copy code to work even in the unit tests.
Change-Id: I546692a6df9615a12a8209618fb6159a9c9e426b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also finish up the req_state -> req conversion.
Change-Id: I131dd52dcd36a790b942e06f0207a3274cc04ffc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fabric commands were skipping a step, so unify all
types of requests through the same completion path.
Change-Id: I5f38a7e1cdcdf33baf71486d5ddae9f5a6157fac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This moves some definitions from nvmf_spec.h to
nvme_spec.h based on the latest publication.
Change-Id: I51b0abd16f7d034696239894aea5089f8ac70c40
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
