This patch adds support for saving VMD subsystem's configuration to a
JSON formatted file. It allows saving and then loading configuration
with VMD enabled without having to send the `enable_vmd` RPC.
Change-Id: I59b380ec1e1f25f60f45d2363724ed7ac78c365c
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473405
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Yao Liu <yotta.liu@ucloud.cn>
Change-Id: I74b5b146c23e5395d26f80ca4f950631bd4721cb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473373
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Without this flag, write requests will lead to I/O errors.
Signed-off-by: Yao Liu <yotta.liu@ucloud.cn>
Change-Id: I39a453683f7b2cbcd49fb8e0b532bf09f9180a8c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473372
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2124: Assigning an array to a string!
Assign as array, or use * instead of @ to concatenate.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Id74c55b7e1c41b6469e84ac388cf8a5bd8e562a6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473276
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove from shellcheck excluded SC2121: To assign a variable,
use just 'var=value', no 'set ..'.
This warning is not actually present in any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I7dae1d73f0e276ef9e5a0cfa78a56227264c0a4d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473272
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We tried to change all of these when updating the RPC
names, but there were some that were missed apparently.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b27d658bb039f201ca003b1d9005e7cfa8c45c2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473340
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We are already suppressing fio (not SPDK fio_plugin)
leaks in a couple of other places, which could likely
be causing the indirect leaks we are now going to
suppress here.
Fixes issue #1003.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie5283280495e7155cda1a93d2bd3d48ffbb6cba7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The pthread_join() is sufficient. The server thread really
shouldn't take 1 second to run, but when running in a VM
it's possible things are getting scheduled such that the
timer expires. This should not be a concern of this test
though - it should just test that the rpc server/client
functionality is working as intended. So remove the
sem_t that was timing out.
Note: I kept the other sem_t's in here for now. Maybe
they should be removed too, but for now my main intention
was to fix this annoying intermittent failure.
While here, fix some typos and cases where we should be
printing "server" instead of "client".
I think this fixes issue #839.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I647d0b9c5faa9ccac53e6f6387757bb5a7649b5c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473490
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Do not run gen_nvme.sh and do not automatically create
nvme bdev configuration.
Allows more control over Nvme/bdev configuration when
running performance tests.
Change-Id: I9ef139921efbcc5d92d3a55c05aace929c6284e7
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464564
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Add possibility to measure CPU utilization on host server
while running FIO tests.
Change-Id: Ibc76c2b1469974297350388880a036d8778e4713
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464563
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This memory leak bug is very easy to reproduce.
You can follow this step to reproduce:
1. clone master spdk , update submoudle
2. ./configure --with-fuse && make -j24
3. valgrind --leak-check=full --error-exitcode=2
test/unit/lib/blobfs/blobfs_bdev.c/blobfs_bdev_ut
It show the memory when you run valgrind.
This is because the ctx in spdk_blobfs_bdev_mount have
not freed when spdk_fs_load(override in blobfs_bdev_ut)
passed.
So i added a unmount operation after mount operation
to fix this problem.
Signed-off-by: jiaqizho <jiaqi.zhou@intel.com>
Change-Id: I770f914123e353dc42d0420c1fb8b34ebdf88f6c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use python3 when installing devstack.
Increase timeouts in order to tests pass in our CI environment.
Change-Id: I6b88e39f9a8f0b8aa255098dc62b881168777ec3
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
For issue https://github.com/spdk/spdk/issues/990,
It can be solved by setting cache pool a smaller
size in order to fit CI test env.
Change-Id: Ia5478df0f25de523917597eaeedcd858b70ab1e6
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471957
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This RPC method can be used to set cache size of
blobfs, in case a smaller or larger memory scale
is requred by cache pool.
Change-Id: I8046c7caeaa15c67825f86d14ae0b79395d51daf
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471870
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since g_fs_cache_size only takes effect when creating
g_cache_pool, so spdk_fs_set_cache_size is only
permitted when cache pool is already freed or hasn't
been initialized.
Add a return value to indicate the result
of spdk_fs_set_cache_size.
Change-Id: I3828b136976d6f03f0751b2f20f68cd47c36ec04
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471869
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we have a mix of -1 and -EINVAL which
is confusing, especially since these types of failures
also result in the caller's callback routine getting
invoked.
While here, document this new -EFAULT return code for
all of the functions that could return it.
Fixes issue #797.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8dfbba0ec0b83db0f2ec055b15830981af1965df
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473054
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
1) consistently put each possible -errno value on separate
line
2) fix -ENOMEM misspelling
3) add missing text about submitting from one thread only
to spdk_nvme_ns_cmd_read_with_md
4) move text about submitting from one thread only for
spdk_nvme_ns_cmd_readv_with_md
5) remove explanation of DSM from
spdk_nvme_ns_cmd_dataset_management - we do not generally
explain the meaning of commands in this header file
It's possible there are some other inconsistencies still, but
I cleaned up all of the ones that I noticed. I was mostly
concerned about item #1 to prepare for a new errno that will
be added in an upcoming patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I993c01a2f9f1f8294c1ebf349cc877a663aa43b1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473053
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The last lcore_offsets value already marks the total
size of the histories file - we don't need to also
add sizeof(struct spdk_trace_flags).
Note that this only affected the amount of memory that
was mmap'ed. It did not result in any observable
failure.
Fixes issue #997.
Reported-by: tinnfu (GitHub submitter)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I70fef16241cf00228bc515678cca1721f440c925
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473049
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: tinnfu <tinnfu@gmail.com>
This at least allows the caller to know there was a
problem, and that the messages wasn't actually sent.
SPDK by default creates huge rings so this problem
should never occur, but out-of-tree use cases may
send messages much more often and require at least
a notification when it fails.
While here, change the thread check to an assert.
There's no need to work around someone calling
this function with a null thread parameter.
Fixes issue #811.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie6d432d616be45c7a4232aff1548cef198702bc0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This returns true if all registered methods and aliases
are correct. False means that an error like one of the
following occurred:
- duplicate method with same name
- alias specified for non-existant method
- alias specified for another alias
Also plumb this so that incorrect RPCs cause an SPDK
application to exit.
Note: there are cases where this would have been helpful
during the recent RPC renaming.
Fixes issue #940.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I235a433c9b8c01e82f16288a8d295e96c54e4eb1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The original io channel is not used directly, only its context (struct
raid_bdev_io_channel) which contains member bdevs' io channels. Store it
directly in raid_bdev_io to eliminate conversions.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Ibff64f75ceff9bf1d431cc3071dfc99f374107ea
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add the ability to register RAID modules. Supported RAID levels are
determined based on the list of registered modules.
The module descriptor structure will hold the function pointers for
RAID-level specific operations.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I7a579ac381f1764b427a48d1dc31260725217c4e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471080
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A recent change to the compression API means that we can no longer
assume that rejection from the API means that it was busy. We need
to only queue operations that were from the busy condition and
fail others.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7fa5d27559eacdf1bdf6982bdc142939333076ae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously used while loop with a break to pull one entry off of
the queued list. Clarrify comment and get rid of while/break.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ifdedf988072a4d79b4d84ed6fef2279d4883ee54
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also cleanup some codes.
Change-Id: I45ff18cd2afcf38c50b073e80448ba5e267e3ef7
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472664
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When initiating the io_u strcture from FIO, always
set the engine_data to NULL first as the io_u structure
is just malloced from FIO without specifically setting
to zero.
In the io_u free path, the engine_data field is checked
whether to NULL or not. To avoid mischeck issue, explicitly
set the engine_data to NULL at the beginning of the io_u
init path.
Change-Id: I52c8c251f36925650a44d14e35781bd8494ff358
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472916
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
After I review the function iscsi_conn_flush_pdus_internal,
I think that it may cause recursive function call issue. One of
the recursive calls in iscsi_conn_flush_pdus_internal
is:
spdk_iscsi_conn_free_pdu
spdk_iscsi_conn_handle_queued_datain_tasks
...
spdk_iscsi_task_cpl(&task->scsi);
...
process_read_task_completion
spdk_iscsi_task_response
iscsi_transfer_in
iscsi_send_datain
spdk_iscsi_conn_write_pdu
iscsi_conn_flush_pdus
iscsi_conn_flush_pdus_internal
So we have to create another list to solve this recursive issue
in the while loop. And we face the the similar issue in
NVMe/TCP before. With this patch, we can fix issues caused by
recursive calls.
Fixes #issue 1023
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7150b962bfb30e74f53ba1a2a826fb78c73d8ea6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472999
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We don't use shebang for bash's scripts that are not executable.
SC2148: Add shebang to the top of your script.
Change-Id: I4bd6868a55ec88ae1edaf0883c8600b65fcdcce2
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472609
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Can only return 0-255. Other data should be written to stdout.
Change-Id: Idb8b387f438121e6b6afe62840ddee752872d7d7
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472605
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix: removed vhost_dir assigment in places where it is not needed.
Change-Id: Idd120099d8c5d28901437e13b5670209f7536568
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472603
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SC2153: Possible Misspelling: MYVARIABLE may not be assigned, but MY_VARIABLE is.
Change-Id: I6c06b82bb8de0ad42162d8fe8ee6aabcfb9534b5
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473141
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds support for hotplug / hotremove detection for devices
behind the VMD. The detection acts similarly to the one implemented for
regular PCIe devices, that is user has to periodically call probe
function. Additionally, for applications not using SPDK's event
framework, spdk_vmd_hotplug_monitor has to be called periodically as
well.
Change-Id: I9f6839560efcf16c839b01976639d835f119cb47
Signed-off-by: orden smith <orden.e.smith@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use one function for VMD module initialization, regardless of whether
the initialization is performed via config or RPC. It'll allow the
module to perform additional steps during its startup that can be shared
between the config / RPC paths.
Change-Id: I1062545a9ea109bd69e01f759e701ca279d0d8de
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie88daa20842f5f166b4a7a5abccafd6683d6da64
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473338
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
There's little use to the "Starting thread on core XX"
messages - they may have served a purpose at some point,
but the other messages showing where each controller
is associated is sufficient.
Also remove the "Attaching to..." message - the
"Attached to..." message is sufficient here too.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9543e8f3f6d7b6e28238cba27fc1e4194908f3b7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473337
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
The loop is intended to accept multiple socks when
available, but once accept returns NULL, there's no
reason to keep trying.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I896908d276da35bc3fff172c1c17e22abd2a5343
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473234
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The core number may be 1 or 2 characters, and the
printf format wasn't accounting for that.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3c87466df1014fb6c0a4e7db1a9b6f6054559eae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
When we specify a queue depth that may be higher than
the io_queue_size, we print a warning indicating this.
But it was also setting the g_warn flag which would
result in this message also getting printed:
WARNING: Some requested NVMe devices were skipped
But we don't actually skip any SSDs in this case. So
remove setting of that flag in this case.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic63209f1a96990dac9664ce245c6406c37248494
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473064
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reverts commit 0b9931516ddc23e3b821ed2de1f45692a06f0d4d.
"cd $dir && ..." in single line does switch directory for
the following commands.
The patch being reverted, broke the nightly (autopackage.sh) tests.
It was only fixing couple of instances of SC2164,
which is being excluded either way.
https://github.com/koalaman/shellcheck/wiki/SC2164
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id4f134ad98953b92fdc69cd0d0b80c02660cf7a9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473220
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
