When header files include other header files, it can be difficult
to read the chain of relationships. Hence remove obvious nested
header inclusion.
Remove obvious unreferenced header inclusion too.
Change-Id: I13b1c4e107da8c1a93fae4a0e3c3ee273887aab0
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391363
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SPDK does not provide casual way to get iSCSI global parameters
set by iSCSI.conf. Hence test/iscsi_tgt have to use hard-coded
value for iSCSI target's nodebase.
NVMeOF provide similar JSON-RPC dump_nvmf_subsystem().
Change-Id: I1a53572f707e83cfd18369475b2565c6390a4d2d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391323
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replace the single call to spdk_scsi_dev_print() with a reimplementation
using public SCSI API functions, and also using the SPDK logging
framework instead of printf().
Change-Id: Ifa455f9e6a4a07a35d5dec311a61e9a8afaa0227
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391320
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This bug is detected by test/iscsi_tgt/rpc_config
Due to the PG-IG map tree, IG-map is added to PG-map.
When PG was deleted first, PG-map was not deleted but PG was
deleted because PG-map has IG-maps.
PG-IG map tree was designed such that when PG was deleted first,
delete all IG-maps belonging to the PG-map, the PG-map, and then
PG.
By this change stale pointer which will cause memory leak is
removed.
Change-Id: I15c2ef48bad34608e53d0b44459c90a0cffda24d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391321
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: To remove the dpdk dependency for iSCSI.
Change-Id: I01ef910496d2029ba755dd6d0c06d61c248b8dfe
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/390938
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Require braces around all conditional statements, e.g.:
if (cond)
statement();
becomes:
if (cond) {
statement();
}
This is the style used through most of the SPDK code, but several
exceptions crept in over time. Add the astyle option to make sure we
are consistent.
Change-Id: I5a71980147fe8dfb471ff42e8bc06db2124a1a7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390914
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Based on the PG-IG map tree implmentation, the following new
JSON-RPC commands are supported:
- add_pg_ig_maps
- delete_pg_ig_maps
Change-Id: Iebc48e379aa8e06b5e7d57935845d6fd53f7f826
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379936
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch add the internal mechanism to add/remove PG-IG maps
to/from an existing iSCSI target.
Next patch will add new JSON-RPC commands and python scripts.
Change-Id: Ib75d180197c5cb679ebfd21324dc36790b50a7aa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/389667
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In iSCSI specification RFC7143, there is the following description
in the section 7.13:
All violations of iSCSI PDU exchange sequences specified in this
document are also protocol errors.
Any protocol error should be handled as iSCSI Reject response whose
the reject reason is Protocol Error.
However current implementation handles a minor PDU error as Drop
connection. This is too severe and change the code from Drop
connection to Reject response.
This issue was detected by libiscsi test suite.
Change-Id: Ie85c56f5dd523445530ec1ff71eda4f594ab73a0
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/389941
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Currently even if PG mapping is removed from iSCSI target,
corresponding SCSI port is not removed. Hence dynamic
reconfiguration of PG to existing iSCSI target is not supported.
This patch supports dynamic SCSI port removal when the
corresponding PG mapping is removed from the existing target.
Some refactoring for SCSI port addition is also done
Change-Id: Ib06bc10743eb088d023f425742e39bb24f1b0df1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/389056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Disambiguate the log components from the trace functionality
(include/spdk/trace.h).
The internal spdk_trace_flag structure and related functions will be
renamed in a later commit - this is just a find and replace on
SPDK_TRACE_* and SPDK_LOG_REGISTER_TRACE_FLAG().
Change-Id: I617bd5a9fbe35ffb44ae6020b292658c094a0ad6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
MaxQueueDepth is configurable for NVMf target by configuration
file. This patch makes this flexibility possible for iSCSI target
too. Increasing macro-defined constant for MaxQueueDepth consume
extra memory regardless of the necessity and hence it may be
better to avoid that.
Change-Id: I7fa9cf86b02c5a8b16411d4b4d356c6e6c0dc3eb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/388552
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All TCP socket operations in iSCSI should go through
functions defined in sock.c.
Two close() calls did not, so they are fixed in this patch.
Change-Id: Ia5a87fd4085eb5b7e6732dc7a505e19994669a7e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/390568
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I054b0f20fa502f30ae3802f95ef108fc92132ff5
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/390558
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is a preparation for dynamic reconfiguration of PG-IG maps.
Current PG-IG map is implemented by a fixed-size array. Linked list
will make much easier to support dynamic reconfiguration of PG-IG maps.
Current:
target - (1..n) ---> PG_map (1..1) -> PG
|
--> IG_map (1..1) -> IG
This proposal:
target - (1..n) -> PG_map --- (1..1) -> PG
|
-- (1..m) -> IG_map - (1..1) -> IG
Change-Id: I92f668b81cdd8003aff222926f8f1ed96b61e56d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385532
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
By supporting the management based on linked list for PG and IG
the group state of PG and IG are no longer necessary.
Change-Id: I249424cacd2d27dda4e4cb2182442d0d1e9bfb8e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/388863
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Current fixed sized array for iSCSI target is not thread safe.
When newly created targets are inserted into the array, multiple
targets may be inserted into the same position. Linked list is
better than fixed size array to support dynamic reconfiguration.
Change-Id: I4db5a3ec16844db06e0cfcd2aef1f97952f15afa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385371
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The results of access control procedure for login in the
spdk_iscsi_tgt_node_access() is defined in the following table:
+------------------------------+
|iscsi name |netmask |result |
+------------------------------+
+------------------------------+
|denied |- |denied |
+------------------------------+
|allowed |allowed |allowed |
+------------------------------+
|allowed |denied |next IG |
+------------------------------+
|not found |- |next IG |
+------------------------------+
However current implementation have redundant repetition in the
spdk_iscsi_tgt_node_access() and the above definition is not
visible. Hence refactor spdk_iscsi_tgt_node_access().
Besides refactor spdk_iscsi_tgt_node_allow_iscsi_name() because
it has redundant repetition too.
Add UT code for these changes.
Change-Id: If06d87c1246c85439ee0482149bd887a7b53b169
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379935
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Naming rule of access control of iSCSI target does not reveal its
intention. Hence change it before refactoring to avoid unnecessary
repeated procedure.
Change-Id: I4064ec0a5a2b52244b6de3958ee2ab41342d1a57
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381248
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In the accessibility control of iSCSI target, "ALL" is used to allow
ANY IP address-port pair or iSCSI name of initiators. However iSCSI
targets cannot know ALL initiators beforehand.
Hence "ANY" will be better than "ALL" and will avoid misunderstanding.
Comments and iscsi_tgt test code are also changed and UT code is added.
Change-Id: Id004d819df6e9ee89f6c1db2e4b4c149be062733
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385168
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make this generic and not directly dependent on
the event framework. That way our libraries can
register pollers without adding a dependency.
Change-Id: I7ad7a7ddc131596ca1791a7b0f43dabfda050f5f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387690
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
"OK/NG" may be only used in Japan. It may cause misunderstanding.
Hence remove "OK/NG" or change to "Allowed/Denied".
Access control of iSCSI target follows further refactoring.
Hence to save the amount of change, "OK/NG"s are mainly removed.
Change-Id: I1f2ef9bc2be21caa86a6ae98377b6d6b3f85386a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385075
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To add initiators to an existing target, manage name and netmask
of initiator group by linked list. It is not easy for array to
detect duplication and change configuration.
Change-Id: Id9e77740e24ac309a33d8de1be37663681160d94
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379932
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_iscsi_init_grp_create_from_configfile() returns 0 even if
creating an initiator group (IG) is failed due to empty netmask or
initiator name. This will be unexpected behavior for end users.
Hence change the return code from 0 to -ENVAL for this failure.
Besides do the following.
Change other error return codes in the function by using errno too.
Current IG don't have any UT code in repository. UT code to confirm
this fix is also submitted.
Change-Id: Ic918feb5c6a3e772b325664d881b2673b553a217
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/384408
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I8ea8c59a0c67176c0c0c39abf807afad61ff3828
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387689
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I864cd8a6c206dfbe62fcb3f72275c1ae51aa4ed7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387688
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We always unregister pollers from the core they're running on,
so we don't need the async completion event when unregistering
them. To avoid changing the logic, create events instead.
Change-Id: Ib50d93e1578684bea69200d89a5e0d383acc8cfe
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387685
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Register all pollers to the current core. If necessary, send
an event to the correct core before registering.
Change-Id: Ie34cc8b11143a58c0f621c87c409a3d09d929648
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387682
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
DPDK 17.11-rc3 switched to IOVA-centric
addressing. The old API is still available,
but is deprecated.
Change-Id: I7b54a1e626e39368acd2190dec725dbf30c7a5de
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/387654
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When an iSCSI connection is closed, spdk_iscsi_conn_stop_poller()
is called in spdk_iscsi_conn_destruct() or
spdk_iscsi_conn_check_shutdown().
However, through both paths, g_num_connections[] is decremented
twice:
(1) in spdk_iscsi_conn_stop_poller()
(2) in spdk_iscsi_conn_free()
This behavior makes g_num_connections[] negative unexpectedly and
for some cases load balancing does not work and the same CPU is
always selected.
How to fix:
spdk_iscsi_conn_stop_poller() is called in the following functions:
- spdk_iscsi_conn_check_shutdown()
- spdk_iscsi_conn_destruct()
- spdk_iscsi_conn_handle_idle().
[Idea 1]
Remove the code to decrement g_num_connections[] from
spdk_iscsi_conn_free().
[Idea 2]
Remove the code to decrement g_num_connections[] from
spdk_iscsi_conn_stop_poller(). Add the code to decrement
g_num_connections[] to __add_idle_conn().
[Idea 1] is simple because just only one line is deleted.
[Idea 2] may be more symmetric than [Idea 1] but to find the right
place to add the code in __add_idle_conn() is not clear and
difficult.
Hence [Idea 1] is proposed.
[Idea 1] may not be the optimal one and more refactoring may be
done.
Change-Id: I81050f4a0e7b3ddd40896f46ab2eb8de14bbcb3a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/384026
Reviewed-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The following functions returns 1 and 0 for succcess and error,
respectively:
- spdk_iscsi_tgt_node_allow_ipv6()
- spdk_iscsi_tgt_node_allow_ipv4()
- spdk_iscsi_tgt_node_allow_netmask()
- spdk_iscsi_tgt_node_access()
Using bool for this purpose will avoid our misunderstanding.
Change-Id: I927876e0503c0eee5364e829a4713f9a345996f6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/383664
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
In the Appendix C. SendTargets Operation in the iSCSI Specification
(RFC7143), there is the following description:
In a Discovery session, a target MUST return all path information
(IP address-port pairs and Target Portal Group Tags) for the
targets on the target Network Entity that the requesting
initiator is authorized to access.
However no description such that Target Portal Group Tag is used
to check authorization of the requesting initiator.
Moreover, according to the iSCSI Specification (RFC7143),
Target Portal Group Tag is unique within an iSCSI Target Node.
Tarrget Portal Group Tag identifies a portal group within an
iSCSI node.
However, current SPDK uses Target Portal Group Tag to check
authorization of the requesting initiator by mistake. This
implementation does not have any compatibility with other storage.
Hence delete the code related with Target Portal Group Tag from
SendTargets function.
Change-Id: If4b79f0d8fe8f5892a798e4f6716045fd18cf0a4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/383660
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
SPDK have used "*" and "[*]" as wildcard address
for iSCSI network portal. These abbreviations may be convenient
but unusual. If "*" or "[*]" is used, output warning message
and forcefully overwrite "*" or "[*]" by "0.0.0.0" or "[::]"
respectively.
After confirming that the usage of "*" and "[*]" is not used any
more, the code for "*" and "[*]" will be deleted.
Change-Id: Ibb8fb0d4598ffa1f7b1690ad6afd10d5ae162612
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/383556
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1) Replace some perror() calls with SPDK_ERRLOG
2) Use spdk_conf_section_get_boolval() to simplify the code
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2a6d0773b09ad16ea35cb6d2f18a9e0977dba31c
Reviewed-on: https://review.gerrithub.io/386666
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With the new asynchronous subsystem finish framework, we can
drive shutdown of existing connections as part of the subsystem
finish path instead of a separate spdk_iscsi_shutdown function
called as the shutdown function in response to SIGINT.
This is a step towards enabling a single target app that
supports multiple protocols (i.e. iSCSI + vhost + NVMe-oF).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id9f596a8091912a72ab7eb93cb45a46fdb130a48
Reviewed-on: https://review.gerrithub.io/386695
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
RPC is a default feature required for almost all usages,
so enable RPC by default, but with a UNIX domain socket
for security reasons.
-r can now be used from the command line to specify
an alternative RPC listen address from the default
/var/tmp/spdk.sock.
Remove the Enable parameter from the Rpc config section
but still allow specifying an alternative listen address
using the Listen parameter as an alternative to the
command line option. This keeps backward compatibility
for this release for anyone using the configuration file
still.
Remove the Rpc sections from all configuration files
that were using them, except for those that specified
alternate TCP ports for multi-process test cases. We
can fix these later to use an alternate UNIX domain
socket and to use the command line instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife0d03fcab638c67b659f1eb85348ddc2b55c4c4
Reviewed-on: https://review.gerrithub.io/386561
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the default config file does not exist, keep the
app's config_file options field as NULL, so that the
app code will not fail when trying to open a non-existent
file.
Also leverage the recent iSCSI and NVMe-oF refactoring,
to just skip trying to read config file parameters if no
config file exists (or the requisite section in the config
file is not present). vhost already handled this so it did
not need to be modified.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic32f0a7a8ce85322a8effd537b62d14732d7b82e
Reviewed-on: https://review.gerrithub.io/385497
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously users would have to pass CHAP and Mutual as
separate words on the DiscoveryAuthMethod line - but
this was problematic since then we would have to check
that the user did not specify Mutual without CHAP.
So instead just make Mutual infer CHAP.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I183d59145abb97198984541157522d6483b18e7c
Reviewed-on: https://review.gerrithub.io/385495
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Some invalid parameters would result in an immediate app exit, while
others such as DefaultTime2Wait would adjust an invalid value
rather than causing an app exit.
Instead, be consistent and just ignore any invalid values, with an
error message.
One exception is the CHAP + Mutual check - this will be fixed
in a separate patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I867e4a2a5685aec73df5e556d529b0356a9c3070
Reviewed-on: https://review.gerrithub.io/385494
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move all of the code related to reading global iSCSI
parameters to a new function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iccbb75996b29b0b7a87c602042f13aaf7935d7e1
Reviewed-on: https://review.gerrithub.io/385493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_iscsi_app_read_parameters() does an SPDK_DEBUGLOG
for each of the global parameters - consolidate these
and move them to a separate function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If1543f9f5846420bf75f7a4aebaf540106f1df69
Reviewed-on: https://review.gerrithub.io/385492
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Modify spdk_iscsi_app_read_parameters() so that it sets
up all of the default values first, and then reads the
config file to update any parameters that may have been
specified.
This is in preparation for breaking out the config file
reading into a separate function that can be skipped
if no config file is available. In this case it will just
use the defaults.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0b9026ea87d171be22085a6baca24e2022cb58dd
Reviewed-on: https://review.gerrithub.io/385491
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_iscsi_tgt_node_access() (in lib/iscsi/tgt_node.c) regards
empty netmask of IG as ALL (allow all initiator's IP address).
However any user cannot create IG whose netmask is empty by both
JSON-RPC and config file. Instead user can create IG whose
netmask is ALL.
The code to regard empty netmask of IG as ALL never run in production.
Hence delete the code and add UT to confirm the fix.
Change-Id: Ib7206d0986db9093cfb6b36191be26293ff6c67a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/382920
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Group the code fragments of add/delete name and mask of initiators
and create spdk_iscsi_init_grp_add/delete_initiators/netmasks()
functions. Memory alloc/free is done in these functions.
Change-Id: I40f2873c5336a05813c0e34797c109386eda4229
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381246
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
This function is not used and there is already similar one.
Hence delete this function.
Change-Id: Iff290c4762cf5da7211382e367e5b137ab8fbf7d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381245
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
FirstBurstLength, MaxBurstLength and MaxRecvDataSegmentLength
cannot be configured, so there is no need to keep global data
members for these parameters - just use the default #defines
instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4b47e00a5594da8ec0b87192be4a23c4a2145bde
Reviewed-on: https://review.gerrithub.io/385490
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Our iSCSI target does not support disabling InitialR2T,
DataPDUInOrder and DataSequenceInOrder, and will fail
if someone tries to disable them in the config file.
So instead, just do not support these parameters at all.
This simplifies the code and reduces confusion.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf1e01a6d12b758404769f77aa3f6221e6e3ee0d
Reviewed-on: https://review.gerrithub.io/385489
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This was not used anywhere - sessions default to
DEFAULT_MAXOUTSTANDINGR2T and never look at the global
MaxOutstandingR2T value.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia4874d8d747063f729061124194b60d15ad3ddac
Reviewed-on: https://review.gerrithub.io/385488
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
init_grp.c has init_grp_destroy() function but does not have
init_grp_create() function. Hence add init_grp_create() function.
init_grp_create() function check duplication of init groups.
Change-Id: I49c64254846ae4edd7a0bb2cf3250fb6f53239f4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381243
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9218b618544def301a4509eda1b266390a80dba5
Reviewed-on: https://review.gerrithub.io/382830
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
