Introduced a new variable to run functional tests.
It's enabled by default, and can be manually disabled
on systems where e.g. only unit tests are run.
SPDK_RUN_FUNCTIONAL_TEST is a supplement to SPDK_UNITTEST.
The two are completely independent - both can be enabled,
disabled, or run in any combination.
The new variable is prefixed SPDK_RUN_ as it aligns nicely
with SPDK_RUN_CHECK_FORMAT, SPDK_RUN_VALGRIND, and
SPDK_RUN_ASAN, all of which control how much is tested.
SPDK_UNITTEST should eventually follow the same pattern
as well.
This gives us 2 layers of configuration:
SPDK_TEST_* <- what is tested
SPDK_RUN_* <- how it is tested
The following would run UT+ASAN for FTL and BlobFS, without
running their functional tests:
```
SPDK_RUN_FUNCTIONAL_TEST=0
SPDK_RUN_ASAN=1
SPDK_TEST_UNITTEST=1
SPDK_TEST_FTL=1
SPDK_TEST_BLOBFS=1
```
Change-Id: I9e592fa41aa2df8e246eca2bb9161b6da6832130
Signed-off-by: Seth Howell <seth.howell@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442327
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch introduces functional tests for FTL bdev.
The tests cover various I/O workflows and check data integrity. Several
scripts have been added to test the FTL library:
* generate_config.sh - prepares configuration scripts for specified
device
* restore.sh - tests restoring device's state from the SSD
* fio.sh - runs tests based on fio and fio_plugin
The tests are run from autotest.sh when the SPDK_TEST_BDEV_FTL flag is
set.
Change-Id: I561d99ed35fe91eadd3756789cc99afe2da8c1db
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431330
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Two fio instancess will try to do simultaneous I/O
to a single vhost block device.
The test uses default_initiator.job as a fio config,
which apparently wasn't used anywhere and had to be
slightly adjusted to work. Specificaly, we had to
specify an empty job in the config file, as specifying
it from the command line wouldn't make it inherit
any options from the [global] section in the file.
Change-Id: I2c2a96a709c567f5c910715a5b3d85a4e28bcb97
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/419066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add SPDK_TEST_CAS suite
Add basic integrity test with multithread-multidevice fio with cache
modes WT and PT
Change-Id: If2916558894d9f7efd9628eb99f7338c90b312b1
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439346
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Added set_read_only_lvol_bdev() RPC that marks
lvol bdev as read only.
This enables to create clones off of a base lvol,
without having to create additional lvol bdev with snapshot.
Change-Id: Ic20bbcd8fbebcef157acce44bfa1da035b0da459
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch rework all JSON config file reading tests. This is needed as
current approach will require to modify each test to re-launch SPDK
applications for each test type. This is hard to do because tests are
not flexible and will require to be rewritten almost from scratch. Not
metioning time to relaunch each test separatly.
Instead, just replace all old tests with one test. Launch only one
target and only one initiator. Then configure it using RPC calls. Then
config is dumped and target and initiator application is relaunched to
reread the configuration from file. Then config is dumped again and
compared.
Change-Id: Id857089aed0e6f2197cbf3ae625a4e9f4b13e8bb
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/432318
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Keep run_test inside a designated file instead of
calling them directly in autotest.sh
In similar way how nvmf and iscsi scripts are composed.
Change-Id: I19f70678a85b5764d34808f8f7a9e735556474f9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/421232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
hotplug.sh skipped in NIGHTLY test for no VM image.
We disable the case temporarily before finding the
missing VM image.
Change-Id: I43afdaa647a85c8fc2c846f79b26885fd541b3f8
Signed-off-by: WangHaiLiang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/431097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
remove from the list test cases from rocksdb.sh
add vhost live migration tc1 and tc2
Change-Id: I2e7beff62e9c54ea86481832c29c613357e19c99
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/429480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Some tests intermittently fail due to leftover lvols
from previous runs:
$ hello_bdev -b Nvme0n1
*ERROR*: Could not open Nvme0n1 - lvol module already claimed it
Fix this by zeroing the first 1MB of each NVMe at the
start of autotest. That will remove the lvolstore, and
will get also rid of any GPT partitions - that's why
this patch also removes the explicit `parted` calls that
would try to do the same.
Since there's no way to do direct I/O with the standard
dd shipped in FreeBSD, we do the `sync` after the normal,
buffered dd.
Change-Id: I18a01bda064f836901327f1dd3cfab1f08e87b1a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/435086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This helps avoid issues with nbd not being ready when
we need it.
Still keep various "modprobe nbd" in different test
files - this ensures these test files can still be
run in isolation. But remove the various "rmmod nbd"
to ensure that nbd always stays loaded. There is no
harm in just keeping nbd loaded all the time.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3597ff1f7ac53162c33a0384a33f33776cf6f182
Reviewed-on: https://review.gerrithub.io/434838
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The timing flags in virtio.sh were configured improperly and were
preventing the timing graph from generating. Also, the vhost initiator
tests should be reported under the same timing flag.
Change-Id: I2a4b755ba98c2064e64e38609936d2f5144464cb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This script should be called when testing the crypto module. It will
configure any qat cards with class code 37c8 for use with the spdk
crypto bdev module.
Change-Id: I233069fbe9ba3c7a6463f52443234f9fe2c9a1f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/428549
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's a C libary for client to call rpc method.
Change-Id: I5378747bd9dab83a41801225ba794b3910d1f5a5
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424061
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Test to create and delete full configuration for iscsi node.
Change-Id: I1c09741bf5afcc7cf9ce58c08973439088ea3ba4
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/425179
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Boot os from a vhost controller using lvol bdev on a device with
512B block size. It performs fio integrity test.
Change-Id: Ic30a5dc33d9dd072559d9101f31e22e9e96862a7
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/421758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I77cf0b8d64c1bfa050d61440472ff65821673b39
Reviewed-on: https://review.gerrithub.io/423999
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new script to enable converting
old INI config files to the new JSON-RPC
config file format.
This prepares for deprecating the INI
config file file format in the future.
Change-Id: I0f2bfa9a585ce3537772b662d8e4028ab08a554d
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/420457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
1.Refactor the run_test function which used to add detailed information
during run test suites and test cases.
2.Refactor the lvol feature test scripts to make sure their log is the same.
3.Users can use "run_test suite command" to run test suites
and use "run_test case command" to run test cases.
4.Update the vhost and lvol test as example.
Change-Id: I7b6387019a861bd1c4f89b9a7712e53150aea8fa
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/403610
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added new test case 702 for tasting lvol stores, similar to tc700
but with different lvol store cluster sizes.
Change-Id: Id33fc6ff9520ed21219f49f161bd41c4f6b71848
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/420758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As requested in GitHub issue #361, we should have a way to control
whether the SPDK-patched nvme-cli tests are executed.
Also add a report_test_completion call for the NVMe-oF nvme-cli test
so we can easily track whether it executed (the local PCIe nvme-cli
test already had a completion).
Change-Id: I70c26bcf2489ccfa563214a9723603aa705be7ab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418866
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Meneghini <johnm@netapp.com>
Reviewed-by: <ed.rodriguez@netapp.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
- load spdk_tgt with bdevs
- check if json config is properly saved and loaded
- check if all bdevs are properly loaded
- check if configuration of spdk_tgt is properly set
Change-Id: I89226bc9c05880e73523fb189116e7433a513244
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/406326
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Type of net framework is now passed throughout the iSCSI tests.
This is in preparation for running VPP tests alongside the ones
on posix.
Change-Id: Ifb25a9e4b04512de882883278b8bb465de579828
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/408879
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Vhost-blk readonly "config-ro" option was
removed from Qemu arguments after merging
pull request f67c9b693a into Qemu master.
"config-ro" Qemu option needs to be removed
from scripts in order for tests to pass.
Nightly test for read-only feature has to be
commented out until Qemu is updated on test
servers.
Change-Id: I0cdc9c2fd3b23ef77a63b54e280e1bb9500229ee
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/413745
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The contigmem driver is built with dpdk and frequently updated. We
should copy this driver each time we build dpdk in order to maintain
support for FreeBSD
kldload checks the sysctl variable kern.module_path when deciding which
modules to load. Since the values stored in this variable are not
determined by our program, I chose to copy the module to both common
directories for kernel modules in FreeBSD.
Change-Id: I2d439a9cbac5bebb79e6ee48bec47409bb215be9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/409250
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The QEMU vhost-user-blk-pci host driver will not negotiate
VIRTIO_BLK_F_RO feature bit by default, users must append
`config-ro=true` to enable it if the backend device can
support read only feature.
Fix the issue #254.
Change-Id: I17dcc1b80bde094dd4873221b681d0c4049abb39
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/408266
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Ceph monitor IP address was always 127.0.0.1, with this change
it can be configured at setup time.
Since each test might prefer to specify different addresses
or ones that do not exist at start of autotest.sh. rbd_setup was
moved to begining of each test respectively.
Change-Id: I5626f7ea979d0db921208355ba23314cf48e971f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/407910
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ibaaddcb34bd9a4528cf655a979c9fd91dde99856
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/407791
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Also move snapshot and clone test plan into implementation.
Change-Id: Ifa1f2da651305747ae24c50921deebd0266c5888
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/392371
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Enable test functions for lvol resize.
Change-Id: Ia4583af211350054797d2d8441083e582e6e2ab7
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Reviewed-on: https://review.gerrithub.io/395043
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NVML (Non Volatile Memory Library) changed its name to
PMDK (Persistent Memory Development Kit), so make the
necessary changes to the SPDK repository.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id07a87eafb4e9a3099603030c58c0e927bafa608
Reviewed-on: https://review.gerrithub.io/406256
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Refactor filesystem test so that it does not use virsh, only qemu.
Source compliation on filesystem was replaced with FIO+verify
on file located on mounted filesystem.
Reason for this change is that test for single filesystem type
took about 1:30 for just compilation itself.
Considering that we have 4 filesystems in test with 2 different
vhost controllers, it took way too long.
Change spaces to tabs.
Change-Id: I396d653efe2bbf76934b2532576455be43632ff4
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/398603
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Introduce RUN_NIGHTLY_FAILING flag for nightly tests
that are always or periodically failing.
A new cron job will be added to run test with this flag.
RUN_NIGHTLY_FAILING is set for:
test/vhost/readonly/readonly.sh
test/nvmf/multiconnection/multiconnection.sh
a fio job in test/lib/bdev/blockdev.sh
Change-Id: I32640c0d4b916156c2ee996a9847c7c9e64941f8
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/403985
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
All files called directly by the unittest.sh script are now located in
the test/unit directory.
Change-Id: I95cfb3d5b7c6ede59d7183c39466f32b7e676643
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/401717
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Along are some neccessary changes to rpc_commands_lib which
are needed to check lvol store names and lvol bdev aliases.
Also update test plan with test cases description.
Change-Id: Ifbe712a105610a78a2292a459aebee77e29903c5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/397088
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
set -x flag in pmem and readonly tests for easier debugging
Change-Id: I006d57bb770427a39b8788cfb1def44b75f47e47
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/403066
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Cover spdk/nvme-cli main commands(Porting from DTS)
Change-Id: I3afa71c5180a0143bc6c55f70b18c45bc098ec6e
Signed-off-by: wenzhong wu <wenzhongx.wu@intel.com>
Reviewed-on: https://review.gerrithub.io/392607
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function consolidates cleanup behaviors that the pool should follow
in the event of a failure.
Change-Id: I8623f065146292b29a38eb199dcbeac5787723e7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/401857
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the first step in reorganizing the spdk test heirarchy.
Change-Id: I83467653af2da2a53251649092bed6902d6cb86e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/401707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
to avoid renumbering test cases in the future.
SIGTERM should be called as last test case, because
it kills vhost instance. If it is called in the middle
another test case should start vhost again.
Want to avoid this.
Change-Id: Idd3e1492bd83e911d17e730c680187cd98f0c125
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/399131
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New vhost user messages GET_CONFIG/SET_CONFIG can be used for
vhost-blk for the purpose to get configuration parameter such
as: Capacity and block size. This commit enable this feature,
users don't need to append capacity any more when started
QEMU. Also event notifier is added for the purpose to change
capacity of block device while QEMU is running.
Also re-enable the vhost-blk tests.
Change-Id: I06ef697984eeea3abbbd655bdcaccaa3b7aa72d7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/386546
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the purpose switching to a new QEMU branch smoothly, disable
vhost-blk autotest temporarily, and we will enable it at the next
commit.
Change-Id: I0368edcbea2468d10f1e95da39b09199d39c7216
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/395885
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Test machines currently do not support virsh causing tests
to fail.
Temporaraily disable the tests until we get rid of virsh.
Change-Id: I93374a11972dadabf7ed7ab44954cc80712f6fec
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/398366
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add vhost-scsi and vhost-blk fio test cases which used more cores
and controllers in nightly
Change-Id: I51b47f6272c1b29dff890384087014627238dc68
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/389072
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is used to test blobstore automatically
which based on examples/blob/cli/blobcli.
Change-Id: I0309cf01d1561f309574a37aeaff8bfbc395f65c
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/386186
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add vhost-scsi and vhost-blk filesystem test cases with
lvol and nvme back-end in nightly test
Change-Id: Id2cccd9a45aaa995bef90415855835b93447f2e9
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/390923
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Record the current state of the system at the beginning of the test run.
This exercises the 'status' functionality of setup.sh, which isn't
tested otherwise.
Change-Id: If5bf3d42fd83c43201fbf5b0b924f5d65711866b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393723
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix: Add condition to some test cases
because there are more possible return values
in check_get_lvol_stores function.
Change-Id: Id035d1edc52252f009277c9afd5f07f8875e0dcc
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/388242
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It will allow to put another test cases
in specifig group.
Change-Id: Id352aa516676f78cdb102f8eac70144f115976a5
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/389098
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Match alternative UNIX domain socket names for tests that use
more than one RPC socket.
Change-Id: I45672adac098554080b836c61b79ffd28577f702
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388677
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is inconsisten with local variable deffining the same path. We need
also to move negative vhost app tests from run_vhost.sh since VHOST_APP
will not be available anymore.
Change-Id: I21cee58c545357ca7e7997cb529b15d436cfed57
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/387561
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Move vhost tests with split disk configuration to nightly test
to save some per-patch testing time.
Change-Id: I837a66cd9b02935c3bbef1f9ae019cbf53d5869b
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/388372
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Adding positive and negative lvol friendly names specific tests.
Test plan updated.
Also fix some test naming discrepancies between plan and
script while at it
Change-Id: Ifb1a62d6a231f4f4ebfb5bb6178d941fc2b9770d
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/385552
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add lvol tasting positive test case.
Adding new autotest config option for better control
where test is executed
Change-Id: Ic08b2395bd14e15072711b97c77b7e1ce26dd2b7
Signed-off-by: Lukasz Galka <lukaszx.galka@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/383432
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We should add more granular timing markers within the vhost tests, but
for now, at least measure the timing of the top-level test categories.
Change-Id: Ic8371d8dffcb1e45fbedd7ef4af448cdee0cef7c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386558
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
RPC is a default feature required for almost all usages,
so enable RPC by default, but with a UNIX domain socket
for security reasons.
-r can now be used from the command line to specify
an alternative RPC listen address from the default
/var/tmp/spdk.sock.
Remove the Enable parameter from the Rpc config section
but still allow specifying an alternative listen address
using the Listen parameter as an alternative to the
command line option. This keeps backward compatibility
for this release for anyone using the configuration file
still.
Remove the Rpc sections from all configuration files
that were using them, except for those that specified
alternate TCP ports for multi-process test cases. We
can fix these later to use an alternate UNIX domain
socket and to use the command line instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife0d03fcab638c67b659f1eb85348ddc2b55c4c4
Reviewed-on: https://review.gerrithub.io/386561
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Those tests were disabled after adding tasting, waiting for
patches with destroy lvol store deleting data on device
to be merged.
As that series was recently merged, tests can be reenabled.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc57e2847ee8f38647113659160a1dcff7397d6d
Reviewed-on: https://review.gerrithub.io/384024
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
currently we always try to clean up after the ioat kmod build even if it
didn't run. This is creating an unnecessary dependency on the
kernel-devel package.
Change-Id: Ie7fbf00b80429b00c3f07cc4dc159a96edd5dfdc
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/385686
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This provides /dev/ram0 when available so that we can have a convenient
blcok disk to test the Linux AIO backend against.
Change-Id: I557dae4dcba918838f55f85cd5981922d765d40e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/385297
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch introduces lvol store and lvols parameters saving
on persistent memories and loading it from saved data on app start.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia63f0cf3d6365d59f31c5f0a1724636bfe73b5b8
Reviewed-on: https://review.gerrithub.io/375764
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added "-c" argument for construct_lvol_store calls in tests.
Added 2 additional test cases for checking cluster_size=0
and cluster_size>base_bdev_size.
Commit also includes small PEP8 fixes for additional empty lines
between class and function definitions.
Change-Id: Ibdfb3312a61828ad4aa0f79327b648b6ea67899b
Signed-off-by: Lukasz Galka <lukaszx.galka@intel.com>
Reviewed-on: https://review.gerrithub.io/381294
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Removing test for lvol bdev resize as it is not supported
Change-Id: I73284f2260e595bfa5db2c24d2e37fcd1b255bd8
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/383086
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Functional pmem tests according to test plan:
https://review.gerrithub.io/#/c/378618/18/test/pmem/test_plan.md
Change-Id: Ia4594fe96a542c654656d2a6d2fed18eb1c2fcf7
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/379972
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Functional negative and positive lvol tests using RPC calls
Change-Id: I9b8d8501b8ab3087e786886ef1e78abe287f8820
Signed-off-by: Lukasz Galka <lukaszx.galka@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/375114
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Script for testing vhost using lvols as backends for
virtual machines. Option for using nested lvol stores and
nested lvol bdevs also provided.
Change-Id: Iad8a196c97f292881a8b424b4433ec281f12aec6
Signed-off-by: Lukasz <lukaszx.galka@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/365798
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Automatically uses valgrind with the same options as CI does
provided that it is available ASAN is not enabled.
NOTE: if you don't want to use valgrind then enable ASAN
Change-Id: I44f8322680eb2608464eb128d49d20dc1d311f0c
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/369064
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also restoring vhost block tests in autotest.
Change-Id: Idc6a3068650ce28636f4709df5a51029bfddbcdd
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/369470
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The lcov --no-external option seems to still generate coverage data for
e.g. /usr/include/c++/4.8.2/tuple on some test pool machines, contrary to
the description of the option. Add an explicit removal of all /usr file
coverage at the end of the test run to work around it.
Change-Id: I8579813b1b76b4bfdef86748e88352bf232df954
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369305
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The vhost blk tests are causing a lot of intermittent
failures in the test pool. Disable for now while this
is debugged further.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia49db7b48b5850e92f60983348c13f724c8895c0
Reviewed-on: https://review.gerrithub.io/369323
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Allow running VMs in fio tests with vhost-block instead of
vhost-scsi.
Change-Id: I89ee437264ddcda0aaefdb71744cee6ce7d451d8
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/365808
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Nearly all tests now make extensive use of the stub application,
so they're effectively all testing multiprocess all the time.
Further, we believe it to be the best policy to not attempt
to support scenarios where the primary process crashes unexpectedly.
We consider this equivalent to a kernel panic and all of the
processes will need to be halted and restarted.
Given the two things above, we can make some fairly dramatic
simplifications to the NVMe multiprocess testing. Only
one piece of functionality - multiple simultaneous secondary
processes - was not already tested by the other regular
tests. This patch removes all other multiprocess tests
and adds a simple test of multiple secondaries.
Change-Id: If99f85913b99862f02c3815ea7c10cd80ea3ce02
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/368208
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d024eabbf72fb59084611df8f661f6b07ae3555
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367733
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It seems that asan does not work well with:
(1) Valgrind. If asan is enabled, we do not use valgrind.
(2) Spdk fio plugin. If asan is enabled, we cannot work
with it even with the suggestion by using LD_preloads.
(3) Hotplug. If asan is enabled, it catches the SEGV earlier
than our defined handler
Change-Id: Id4bd5ae0f545aaba7d028e3da14fdddc18682429
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/364917
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fixes coverage after addition of the DPDK submodule.
Change-Id: I03e2a4b61d9648e49c8f267e32879e3f2580e27a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363309
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I01b3e9243674b349dda42df896f7332d168f940f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362390
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This enables iSCSI tests to be more easily run in isolation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4868ca68fe16e06025fd36c62c41ad0694806051
Reviewed-on: https://review.gerrithub.io/361811
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Collect coverage info when running UT locally when lcov
is available.
Change-Id: I34a8b60056775a25cd4a3906d59c4a42e7cc845f
Signed-off-by: paul luse <paul.e.luse@intel.com>
Also adds the automation test case for using remote
NVMe devices exported by NVMe-oF target.
Change-Id: I2b839a4eeec33d5b0c30d654e6013ad8c7949e23
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This is the initial commit for "blobfs", a lightweight
filesystem built on top of the SPDK blobstore.
Also included in this patch:
1) a shim for using SPDK bdevs as the backing store for
SPDK blobstore/blobfs
2) documentation for using blobfs as the storage engine
with RocksDB
3) scripts for running a set of workloads and collecting
profiling data with RocksDB and blobfs
See doc/blobfs/getting_started.md included in this commit
for more details on blobfs, including some of the current
limitations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2a6d3d4b87236730051228ed62c0c04e04c42c73
Allow agents to selectively enable which tests they run in an optional
file, ~/autorun-spdk.conf.
Change-Id: I52440884cbe599aeb1270dc4f6ee85f5acb9a0c2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Seth Howell <seth.howell@intel.com>
This patch creates a new test case: use rpc to
frequently add/delete a same subsystem to verify the
correctness of our code.
Change-Id: Ib582061f9fa909f271bea4865df29a3f432f807c
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This patch adds a library, application and test scripts for extending
SPDK to present virtio-scsi controllers to QEMU-based VMs and
process I/O submitted to devices attached to those controllers.
This functionality is dependent on QEMU patches to enable
vhost-scsi in userspace - those patches are currently working their
way through the QEMU mailing list, but temporary patches to enable
this functionality in QEMU will be made available shortly through the
SPDK github repository.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Krzysztof Jakimiak <krzysztof.jakimiak@intel.com>
Signed-off-by: Michal Kosciowski <michal.kosciowski@intel.com>
Signed-off-by: Karol Latecki <karolx.latecki@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Krzysztof Jakimiak <krzysztof.jakimiak@intel.com>
Change-Id: I138e4021f0ac4b1cd9a6e4041783cdf06e6f0efb
It is caused by this commit:
4163626c5c
nvmf_tgt_delete_subsystem registers the poller
with function subsystem_delete_event.
subsystem_delete_event is called asynchronously,
the deletion should happen in this function.
Otherwise, with the current code,
g_subsystems_shutdown = true
TAILQ_EMPTY(&g_subsystems) = true
when subsystem_delete_event is firstly called.
If there are multiple subsystems, the logic is wrong.
Thus other subsystem will never be delete. since
we already execute shutdown_complete().
Also add related test scripts.
Change-Id: I3823563fc9e8611c11a6d798685ff64e2939842e
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
After checking the code, aerl in our session is 0,
so there will be only 1 AER. So currently,
we will only handle 1 AER case.
When the AER event is triggered by real NVMe device owned
by the subsystem, it notifies all sessions belonging to
the subsystem.
Change-Id: Ia80fb0f03e893c20d8dd14afbed8db10db38301c
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The other coverage files are intermediate steps and are not necessary
for the generation of the final coverage data.
Change-Id: I2ad992fc7f9a93a5ae7a69b28b53b159d0ad10e2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Now that unittest.sh is run as part of the automated tests, drop the
various unit test calls scattered throughout the tree.
Change-Id: Iea98314bb7f04620d72d81d25e24f8e706b50ce1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Verify that the unit test script run by Travis CI works in the autotest
environment.
This duplicates some of the current tests - that will be cleaned up in a
future commit.
Change-Id: Icca60dee3348e2675492b9c6294de6aa094b3375
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This version of multi-process support needs to have DPDK 16.11 builtin.
Change-Id: I3352944516f327800b4bd640347afc6127d82ed4
Signed-off-by: GangCao <gang.cao@intel.com>
As part of this commit, stop building the iscsi
tests on FreeBSD. This new pdu test links in
object files from the iscsi library, some of which
do not build currently on FreeBSD with our default
error/warning levels.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icb6a3dc17aa62882d0477f7734d2701ea09a3f36
Leave the RBD pool configured and running throughout the tests so that
it can be used in multiple test scripts.
Change-Id: I056ef29bd8d97fa63f1ca78ee728f9c51f4bdf41
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This makes it easier to search logs on test
boundaries.
Change-Id: I4500479cb8c8322d5ba73bbefd51e006cbb1e82a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This test will create a malloc and NVMe iSCSI target node,
perform an iSCSI login, create and mount a filesystem, then
copy the SPDK contents to the mount and do a build.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I00291e6ca768dd4b685086cf1479098558b9329f
The new env library will wrap all third-party library
calls and be easily swappable with alternate implementations
at build time. For now, it's just the memory library
renamed.
Change-Id: I26a70933289f8137107208ba75f7520fd7a33da0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Don't try to delete partitions on NVMe block devices that are already
partitions. For example, clean up nvme0n1 but not nvme0n1p1.
Change-Id: I1f642abd7f6ff6b9b6c08d65afee04b9bc9a3430
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Keep the temporary files generated by running coverage-instrumented
programs. This is useful for debugging issues with lcov.
Change-Id: I00127e936ecedcfb86d921e3dbde2ed636cc2a4c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
