numam-spdk/test/nvmf/common.sh

#!/usr/bin/env bash

NVMF_PORT=4420
NVMF_IP_PREFIX="192.168.100"
NVMF_IP_LEAST_ADDR=8
NVMF_TCP_IP_ADDRESS="127.0.0.1"

: ${NVMF_APP_SHM_ID="0"}; export NVMF_APP_SHM_ID
: ${NVMF_APP="./app/nvmf_tgt/nvmf_tgt -i $NVMF_APP_SHM_ID -e 0xFFFF"}; export NVMF_APP

have_pci_nics=0

function load_ib_rdma_modules()
{
	if [ $(uname) != Linux ]; then
		return 0
	fi

	modprobe ib_cm
	modprobe ib_core
	# Newer kernels do not have the ib_ucm module
	modprobe ib_ucm || true
	modprobe ib_umad
	modprobe ib_uverbs
	modprobe iw_cm
	modprobe rdma_cm
	modprobe rdma_ucm
}


function detect_soft_roce_nics()
{
	if hash rxe_cfg; then
		rxe_cfg start
		rdma_nics=$(get_rdma_if_list)
		all_nics=$(ip -o link | awk '{print $2}' | cut -d":" -f1)
		non_rdma_nics=$(echo -e "$rdma_nics\n$all_nics" | sort | uniq -u)
		for nic in $non_rdma_nics; do
			if [[ -d /sys/class/net/${nic}/bridge ]]; then
				continue
			fi
			rxe_cfg add $nic || true
		done
	fi
}


# args 1 and 2 represent the grep filters for finding our NICS.
# subsequent args are all drivers that should be loaded if we find these NICs.
# Those drivers should be supplied in the correct order.
function detect_nics_and_probe_drivers()
{
	NIC_VENDOR="$1"
	NIC_CLASS="$2"

	nvmf_nic_bdfs=$(lspci | grep Ethernet | grep "$NIC_VENDOR" | grep "$NIC_CLASS" | awk -F ' ' '{print "0000:"$1}')

	if [ -z "$nvmf_nic_bdfs" ]; then
		return 0
	fi

	have_pci_nics=1
	if [ $# -ge 2 ]; then
		# shift out the first two positional arguments.
		shift 2
		# Iterate through the remaining arguments.
		for i; do
			modprobe "$i"
		done
	fi
}


function detect_pci_nics()
{

	if ! hash lspci; then
		return 0
	fi

	detect_nics_and_probe_drivers "Mellanox" "ConnectX-4" "mlx4_core" "mlx4_ib" "mlx4_en"
	detect_nics_and_probe_drivers "Mellanox" "ConnectX-5" "mlx5_core" "mlx5_ib"
	detect_nics_and_probe_drivers "Intel" "X722" "i40e" "i40iw"
	detect_nics_and_probe_drivers "Chelsio" "Unified Wire" "cxgb4" "iw_cxgb4"

	if [ "$have_pci_nics" -eq "0" ]; then
		return 0
	fi

	# Provide time for drivers to properly load.
	sleep 5
}

function detect_rdma_nics()
{
	detect_pci_nics
	if [ "$have_pci_nics" -eq "0" ]; then
		detect_soft_roce_nics
	fi
}

function allocate_nic_ips()
{
	let count=$NVMF_IP_LEAST_ADDR
	for nic_name in $(get_rdma_if_list); do
		ip="$(get_ip_address $nic_name)"
		if [ -z $ip ]; then
			ip addr add $NVMF_IP_PREFIX.$count/24 dev $nic_name
			ip link set $nic_name up
			let count=$count+1
		fi
		# dump configuration for debug log
		ip addr show $nic_name
	done
}

function get_available_rdma_ips()
{
	for nic_name in $(get_rdma_if_list); do
		get_ip_address $nic_name
	done
}

function get_rdma_if_list()
{
	for nic_type in $(ls /sys/class/infiniband); do
		for nic_name in $(ls /sys/class/infiniband/${nic_type}/device/net); do
			echo "$nic_name"
		done
	done
}

function get_ip_address()
{
	interface=$1
	ip -o -4 addr show $interface | awk '{print $4}' | cut -d"/" -f1
}

function nvmfcleanup()
{
	sync
	set +e
	for i in {1..20}; do
		modprobe -v -r nvme-$TEST_TRANSPORT
		modprobe -v -r nvme-fabrics
		if [ $? -eq 0 ]; then
			set -e
			return
		fi
		sleep 1
	done
	set -e

	# So far unable to remove the kernel modules. Try
	# one more time and let it fail.
	# Allow the transport module to fail for now. See Jim's comment
	# about the nvme-tcp module below.
	modprobe -v -r nvme-$TEST_TRANSPORT || true
	modprobe -v -r nvme-fabrics
}

function nvmftestinit()
{
	if [ -z $TEST_TRANSPORT ]; then
		echo "transport not specified - use --transport= to specify"
		return 1
	fi
	if [ "$TEST_MODE" == "iso" ]; then
		$rootdir/scripts/setup.sh
		if [ "$TEST_TRANSPORT" == "rdma" ]; then
			rdma_device_init
		fi
	fi
	if [ "$TEST_TRANSPORT" == "rdma" ]; then
		RDMA_IP_LIST=$(get_available_rdma_ips)
		NVMF_FIRST_TARGET_IP=$(echo "$RDMA_IP_LIST" | head -n 1)
		if [ -z $NVMF_FIRST_TARGET_IP ]; then
			echo "no NIC for nvmf test"
			exit 0
		fi
	elif [ "$TEST_TRANSPORT" == "tcp" ]; then
		NVMF_FIRST_TARGET_IP=127.0.0.1
	fi

	# currently we run the host/perf test for TCP even on systems without kernel nvme-tcp
	#  support; that's fine since the host/perf test uses the SPDK initiator
	# maybe later we will enforce modprobe to succeed once we have systems in the test pool
	#  with nvme-tcp kernel support - but until then let this pass so we can still run the
	#  host/perf test with the tcp transport
	modprobe nvme-$TEST_TRANSPORT || true
}

function nvmfappstart()
{
	timing_enter start_nvmf_tgt
	$NVMF_APP $1 &
	nvmfpid=$!
	trap "process_shm --id $NVMF_APP_SHM_ID; nvmftestfini; exit 1" SIGINT SIGTERM EXIT
	waitforlisten $nvmfpid
	timing_exit start_nvmf_tgt
}

function nvmftestfini()
{
	nvmfcleanup
	killprocess $nvmfpid
	if [ "$TEST_MODE" == "iso" ]; then
		$rootdir/scripts/setup.sh reset
		if [ "$TEST_TRANSPORT" == "rdma" ]; then
			rdma_device_init
		fi
	fi
}

function rdma_device_init()
{
	load_ib_rdma_modules
	detect_rdma_nics
	allocate_nic_ips
}

function revert_soft_roce()
{
	if hash rxe_cfg; then
		interfaces="$(ip -o link | awk '{print $2}' | cut -d":" -f1)"
		for interface in $interfaces; do
			rxe_cfg remove $interface || true
		done
		rxe_cfg stop || true
	fi
}

function check_ip_is_soft_roce()
{
	IP=$1
	if hash rxe_cfg; then
		dev=$(ip -4 -o addr show | grep $IP | cut -d" " -f2)
		if [ -z $(rxe_cfg | grep $dev | awk '{print $4}') ]; then
			return 1
		else
			return 0
		fi
	else
		return 1
	fi
}

function nvme_connect()
{
	local init_count=$(nvme list | wc -l)

	nvme connect $@
	if [ $? != 0 ]; then return $?; fi

	for i in $(seq 1 10); do
		if [ $(nvme list | wc -l) -gt $init_count ]; then
			return 0
		else
			sleep 1s
		fi
	done
	return 1
}