d/numam-spdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
1cbd14ca1b
numam-spdk/CHANGELOG.md
Jim Harris 870b0e5b29 log: remove "trace" from log flag RPCs 
We will keep the RPCs for now but mark them deprecated.

Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0407dcb392ea0c9e89c0f26cd5670aed2dbfadef

Reviewed-on: https://review.gerrithub.io/435345
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
2018-12-03 19:50:15 +00:00

1098 lines
47 KiB
Markdown
Raw Blame History

# Changelog
## v19.01: (Upcoming Release)
### nvme
admin_timeout_ms was added to NVMe controller initialization options, users
can change the default value when probing a controller.
### NVMe-oF Target
The `spdk_nvmf_tgt_opts` struct has been deprecated in favor of `spdk_nvmf_transport_opts`.
Users will no longer be able to specify target wide I/O parameters. `spdk_nvmf_tgt_listen`
will also no longer implicitly initialize a transport with the default target options (since
there are none). Instead, a user must manually instantiate the transport with `spdk_nvmf_transport_create`
prior to calling `spdk_nvmf_tgt_listen`.
Related to the previous change, the rpc `set_nvmf_target_options` has been renamed to
`set_nvmf_target_max_subsystems` to indicate that this is the only target option available for the user to edit.
### nvme
Add a new TCP/IP transport(located in lib/nvme/nvme_tcp.c) in nvme driver. With
this new transport, it can be used to connect the NVMe-oF target with the
same TCP/IP support.
### nvmf
Add a new TCP/IP transport (located in lib/nvmf/tcp.c). With this tranport,
the SPDK NVMe-oF target can have a new transport, and can serve the NVMe-oF
protocol via TCP/IP from the host.
### bdev
On shutdown, bdev unregister now proceeds in top-down fashion, with
claimed bdevs skipped (these will be unregistered later, when virtual
bdev built on top of the respective base bdev unclaims it). This
allows virtual bdevs to be shut down cleanly as opposed to the
previous behavior that didn't differentiate between hotremove and
planned shutdown.
### log
"trace flags" are now referred to as "log flags" in the SPDK log API. The
set_trace_flag, clear_trace_flag and get_trace_flags RPCs are now deprecated,
and set_log_flag, clear_log_flag and get_log_flags RPCs have been added.
## v18.10:
### nvme
spdk_nvme_ctrlr_cmd_security_send() and spdk_nvme_ctrlr_cmd_security_receive()
were added to support sending or receiving security protocol data to or from
nvme controller.
spdk_nvme_ns_get_extended_sector_size() was added. This function includes
the metadata size per sector (if any). spdk_nvme_ns_get_sector_size() still
returns only the data size per sector, not including metadata.
New `send_nvme_cmd` RPC was added to allow sending NVMe commands directly to NVMe controller.
See the [send_nvme_cmd](http://spdk.io/doc/jsonrpc.html#rpc_send_nvme_cmd) documentation
for more details.
### Build System
New `configure` options, `--with-shared` and `--without-shared`
[default], provide the capability to build, or not, SPDK shared libraries.
This includes the single SPDK shared lib encompassing all of the SPDK
static libs as well as individual SPDK shared libs corresponding to
each of the SPDK static ones. Although the production of the shared
libs conforms with conventional version naming practices, such naming
does not at this time confer any SPDK ABI compatibility claims.
### bdev
spdk_bdev_alias_del_all() was added to delete all alias from block device.
A new virtual bdev module has been added to perform at rest data encryption using the DPDK CryptoDev
Framework. The module initially uses a software AESNI CBC cipher with experimental support for the
Intel QAT hardware accelerator also currently implemented with support for CBC cipher. Future work
may include additional ciphers as well as consideration for authentication.
The RAID virtual bdev module is now always enabled by default. The configure --with-raid and
--without-raid options are now ignored and deprecated and will be removed in the next release.
Enforcement of bandwidth limits for quality of service (QoS) has been added to the bdev layer.
See the new [set_bdev_qos_limit](http://www.spdk.io/doc/jsonrpc.html#rpc_set_bdev_qos_limit)
documentation for more details. The previous set_bdev_qos_limit_iops RPC method introduced at
18.04 release has been deprecated. The new set_bdev_qos_limit RPC method can support both
bandwidth and IOPS limits.
spdk_bdev_config_json() and corresponding `get_bdevs_config` RPC was removed.
### Environment Abstraction Layer and Event Framework
The size parameter of spdk_mem_map_translate is now a pointer. This allows the
function to report back the actual size of the translation relative to the original
request made by the user.
A new structure spdk_mem_map_ops has been introduced to hold memory map related
callbacks. This structure is now passed as the second argument of spdk_mem_map_alloc
in lieu of the notify callback.
### DPDK 18.08
The DPDK submodule has been updated to the DPDK 18.08 release. SPDK will now automatically
utilize DPDK's dynamic memory management with DPDK versions >= 18.05.1.
Hugepages can be still reserved with `[-s|--mem-size <size>]` option at application startup,
but once we use them all up, instead of failing user allocations with -ENOMEM, we'll try
to dynamically reserve even more. This allows starting SPDK with `--mem-size 0` and using
only as many hugepages as it is really needed.
Due to this change, the memory buffers returned by `spdk_*malloc()` are no longer guaranteed
to be physically contiguous.
### I/OAT
I/OAT driver can now reinitialize I/OAT channels after encountering DMA errors.
### iscsi target
Parameter names of `set_iscsi_options` and `get_iscsi_global_params` RPC
method for CHAP authentication in discovery sessions have been changed to
align with `construct_target_node` RPC method. Old names are still usable
but will be removed in future release.
`set_iscsi_discovery_auth` and `set_iscsi_target_node_auth` RPC methods have
been added to set CHAP authentication for discovery sessions and existing
target nodes, respectively.
The SPDK iSCSI target supports an AuthFile which can be used to load CHAP
shared secrets when the iSCSI target starts. SPDK previously provided a
default location for this file (`/usr/local/etc/spdk/auth.conf`) if none was
specified. This default has been removed. Users must now explicitly specify
the location of this file to load CHAP shared secrets from a file, or use
the related iSCSI RPC methods to add them at runtime.
### iscsi initiator
The SPDK iSCSI initiator is no longer considered experimental and becomes
a first-class citizen among bdev modules. The basic usage has been briefly
described in the bdev user guide: [iSCSI bdev](https://spdk.io/doc/bdev.html#bdev_config_iscsi)
### Miscellaneous
The SPDK application framework can now parse long name command line parameters.
Most single-character parameters have a long name equivalent now. See the
[Command Line Parameters](https://spdk.io/doc/app_overview.html) documentation
for details or use the `--help` command line parameter to list all available
params.
bdevperf `-s` param (io size) was renamed to `-o` as `-s` had been already
used by existing apps for memory size.
bdevio can now accept all SPDK command line parameters. The config now has to
be provided with `-c` or `--config` param.
The following ioat/perf and nvme/perf parameters were renamed as well:
`-s` (io size) to `-o`
`-d` (mem size) to `-s`
The ReactorMask config file parameter has been deprecated. Users should
use the -m or --cpumask command line option to specify the CPU core mask
for the application.
Default config file pathnames have been removed from iscsi_tgt, nvmf_tgt
and vhost. Config file pathnames may now only be specified using the
-c command line option.
Users may no longer set DPDK_DIR in their environment to specify the
location of the DPDK installation used to build SPDK. Using DPDK_DIR
has not been the documented nor recommended way to specify the DPDK
location for several releases, but removing it ensures no unexpected
surprises for users who may have DPDK_DIR defined for other reasons.
Users should just use the "configure" script to specify the DPDK
location before building SPDK.
Although we know that many developers still use Python 2 we are officially
switching to Python3 with requirement that all new code must be valid also
for Python 2 up to the EOL which is year 2020.
Invoking interpreter explicitly is forbidden for executable scripts. There
is no need to use syntax like "python ./scripts/rpc.py". All executable
scripts must contain proper shebang pointing to the right interpreter.
Scripts without shebang musn't be executable.
A Python script has been added to enable conversion of old INI config file
to new JSON-RPC config file format. This script can be found at
scripts/config_converter.py. Example how this script can be used:
~~~{.sh}
cat old_format.ini | scripts/config_converter.py > new_json_format.json
~~~
### Sock
Two additional parameters were added to spdk_sock_get_addr() for the server
port and client port. These parameters are named "sport" and "cport"
respectively.
### Virtio
The following RPC commands have been deprecated:
- construct_virtio_user_scsi_bdev
- construct_virtio_pci_scsi_bdev
- construct_virtio_user_blk_bdev
- construct_virtio_pci_blk_bdev
- remove_virtio_scsi_bdev
The `construct_virtio_*` ones were replaced with a single `construct_virtio_dev`
command that can create any type of Virtio bdev(s). `remove_virtio_scsi_bdev`
was replaced with `remove_virtio_bdev` that can delete both Virtio Block and SCSI
devices.
### Blobfs
spdk_file_get_id() returning unique ID for the file was added.
### JSON
Added jsonrpc-client C library intended for issuing RPC commands from applications.
Added API enabling iteration over JSON object:
- spdk_json_find()
- spdk_json_find_string()
- spdk_json_find_array()
- spdk_json_object_first()
- spdk_json_array_first()
- spdk_json_next()
### Blobstore
Blobstore I/O operations are now based on io_units, instead of blobstore page size.
The io_unit size is now the same as the underlying block device's block size.
Logical volumes built on a block device with 512B block size can now be used as boot devices
in QEMU.
### SPDKCLI
The SPDKCLI interactive command tool for managing SPDK is no longer considered experimental.
Support for the iSCSI and NVMe-oF targets has been added.
## v18.07:
### bdev
A new public header file bdev_module.h has been introduced to facilitate the
development of new bdev modules. This header includes an interface for the
spdk_bdev_part and spdk_bdev_part_base objects to enable the creation of
multiple virtual bdevs on top of a single base bdev and should act as the
primary API for module authors.
spdk_bdev_get_opts() and spdk_bdev_set_opts() were added to set bdev-wide
options.
A mechanism for handling out of memory condition errors (ENOMEM) returned from
I/O submission requests at the bdev layer has been added. See
spdk_bdev_queue_io_wait().
The spdk_bdev_get_io_stat() function now returns cumulative totals instead of
resetting on each call. This allows multiple callers to query I/O statistics
without conflicting with each other. Existing users will need to adjust their
code to record the previous I/O statistics to calculate the delta between calls.
I/O queue depth tracking and samples options have been added. See
spdk_bdev_get_qd(), spdk_bdev_get_qd_sampling_period(), and
spdk_bdev_set_qd_sampling_period().
### RAID module
A new bdev module called "raid" has been added as experimental module which
aggregates underlying NVMe bdevs and exposes a single raid bdev. Please note
that vhost will not work with this module because it does not yet have support
for multi-element io vectors.
### Log
The debug log component flag available on several SPDK applications has been
renamed from `-t` to `-L` to prevent confusion with tracepoints and to allow the
option to be added to tools that already use `-t` to mean something else.
### Blobstore
A new function, spdk_bs_dump(), has been added that dumps all of the contents of
a blobstore to a file pointer. This includes the metadata and is very useful for
debugging.
Two new operations have been added for thin-provisioned blobs.
spdk_bs_inflate_blob() will allocate clusters for all thinly provisioned regions
of the blob and populate them with the correct data by reading from the backing
blob(s). spdk_bs_blob_decouple_parent() works similarly, but will only allocate
clusters that correspond to data in the blob's immediate parent. Clusters
allocated to grandparents or that aren't allocated at all will remain
thin-provisioned.
### BlobFS
Changed the return type of spdk_file_truncate() from void to int to allow the
propagation of `ENOMEM` errors.
### NVMe Driver
The new API functions spdk_nvme_qpair_add_cmd_error_injection() and
spdk_nvme_qpair_remove_cmd_error_injection() have been added for NVMe error
emulation. Users can set a specified command to fail with a particular error
status.
Changed the name `timeout_sec` parameter to `timeout_us` in
spdk_nvme_ctrlr_register_timeout_callback(), and also changed the type from
uint32_t to uint64_t. This will give users more fine-grained control over the
timeout period.
Basic support for Open Channel SSDs was added. See nvme_ocssd.h
### NVMe Over Fabrics
The spdk_nvmf_tgt_destroy() function is now asynchronous and takes a callback
as a parameter.
spdk_nvmf_qpair_disconnect() was added to allow the user to disconnect qpairs.
spdk_nvmf_subsystem_get_max_namespaces() was added to query the maximum allowed
number of namespaces for a given subsystem.
### Build System
The build system now generates a combined shared library (libspdk.so) that may
be used in place of the individual static libraries (libspdk_*.a). The combined
library includes all components of SPDK and is intended to make linking against
SPDK easier. The static libraries are also still provided for users that prefer
to link only the minimal set of components required.
### git pre-commit and pre-push hooks
The pre-commit hook will run `scripts/check_format.sh` and verify there are no
formating errors before allowing `git commit` to run. The pre-push hook runs
`make CONFIG_WERROR=y` with and without `CONFIG_DEBUG=y` using both the gcc and
clang compiler before allowing `git push` to run. Following each DEBUG build
`test/unit/unittest.sh` is run and verified. Results are recorded in the
`make.log` file.
To enable type: 'git config core.hooksPath .githooks'. To override after
configuration use the `git --no-verify` flag.
### RPC
The `start_nbd_disk` RPC method now returns the path to the kernel NBD device node
rather than always returning `true`.
### DPDK 18.05
The DPDK submodule has been rebased on the DPDK 18.05 release. DPDK 18.05 supports
dynamic memory allocation, but due to some issues found after the DPDK 18.05 release,
that support is not enabled for SPDK 18.07. Therefore, SPDK 18.07 will continue to use
the legacy memory allocation model. The plan is to enable dynamic memory allocation
after the DPDK 18.08 release which should fix these issues.
### Environment Abstraction Layer and Event Framework
The spdk_mem_map_translate() function now takes a size parameter to indicate the size of
the memory region. This can be used by environment implementations to validate the
requested translation.
The I/O Channel implementation has been moved to its own library - lib/thread. The
public API that was previously in spdk/io_channel.h is now in spdk/thread.h The
file spdk/io_channel.h remains and includes spdk/thread.h.
spdk_reactor_get_tsc_stats was added to return interesting statistics for each
reactor.
### IOAT
IOAT for copy engine is disabled by default. It can be enabled by specifying the Enable
option with "Yes" in `[Ioat]` section of the configuration file. The Disable option is
now deprecated and will be removed in a future release.
## v18.04: Logical Volume Snapshot/Clone, iSCSI Initiator, Bdev QoS, VPP Userspace TCP/IP
### vhost
The SPDK vhost-scsi, vhost-blk and vhost-nvme applications have fixes to address the
DPDK rte_vhost vulnerability [CVE-2018-1059](http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-1059).
Please see this [security advisory](https://access.redhat.com/security/cve/cve-2018-1059)
for additional information on the DPDK vulnerability.
Workarounds have been added to ensure vhost compatibility with QEMU 2.12.
EXPERIMENTAL: Support for vhost-nvme has been added to the SPDK vhost target. See the
[vhost documentation](http://www.spdk.io/doc/vhost.html) for more details.
### Unified Target Application
A new unified SPDK target application, `spdk_tgt`, has been added. This application combines the
functionality of several existing SPDK applications, including the iSCSI target, NVMe-oF target,
and vhost target. The new application can be managed through the existing configuration file and
[JSON-RPC](http://www.spdk.io/doc/jsonrpc.html) methods.
### Env
spdk_mempool_get_bulk() has been added to wrap DPDK rte_mempool_get_bulk().
New memory management functions spdk_malloc(), spdk_zmalloc(), and spdk_free() have been added.
These new functions have a `flags` parameter that allows the user to specify whether the allocated
memory needs to be suitable for DMA and whether it should be shared across processes with the same
shm_id. The new functions are intended to replace spdk_dma_malloc() and related functions, which will
eventually be deprecated and removed.
### Bdev
A new optional bdev module interface function, `init_complete`, has been added to notify bdev modules
when the bdev subsystem initialization is complete. This may be useful for virtual bdevs that require
notification that the set of initialization examine() calls is complete.
The bdev layer now allows modules to provide an optional per-bdev UUID, which can be retrieved with
the spdk_bdev_get_uuid() function.
Enforcement of IOPS limits for quality of service (QoS) has been added to the bdev layer. See the
[set_bdev_qos_limit_iops](http://www.spdk.io/doc/jsonrpc.html#rpc_set_bdev_qos_limit_iops) documentation
for more details.
### RPC
The `[Rpc]` configuration file section, which was deprecated in v18.01, has been removed.
Users should switch to the `-r` command-line parameter instead.
The JSON-RPC server implementation now allows up to 32 megabyte responses, growing as
needed; previously, the response was limited to 32 kilobytes.
### SPDKCLI
EXPERIMENTAL: New SPDKCLI interactive command tool for managing SPDK is available.
See the [SPDKCLI](http://www.spdk.io/doc/spdkcli.html) documentation for more details.
### NVMe Driver
EXPERIMENTAL: Support for WDS and RDS capable CMBs in NVMe controllers has been added. This support is
experimental pending a functional allocator to free and reallocate CMB buffers.
spdk_nvme_ns_get_uuid() has been added to allow retrieval of per-namespace UUIDs when available.
New API functions spdk_nvme_ctrlr_get_first_active_ns() and spdk_nvme_ctrlr_get_next_active_ns()
have been added to iterate active namespaces, as well as spdk_nvme_ctrlr_is_active_ns() to check if
a namespace ID is active.
### NVMe-oF Target
Namespaces may now be assigned unique identifiers via new optional `eui64` and `nguid` parameters
to the `nvmf_subsystem_add_ns` RPC method. Additionally, the NVMe-oF target automatically exposes
the backing bdev's UUID as the namespace UUID when available.
spdk_nvmf_subsystem_remove_ns() is now asynchronous and requires a callback to indicate completion.
### Blobstore
A number of functions have been renamed:
- spdk_bs_io_write_blob() => spdk_blob_io_write()
- spdk_bs_io_read_blob() => spdk_blob_io_read()
- spdk_bs_io_writev_blob() => spdk_blob_io_writev()
- spdk_bs_io_readv_blob() => spdk_blob_io_readv()
- spdk_bs_io_unmap_blob() => spdk_blob_io_unmap()
- spdk_bs_io_write_zeroes_blob() => spdk_blob_io_write_zeroes()
The old names still exist but are deprecated. They will be removed in the v18.07 release.
spdk_blob_resize() is now an asynchronous operation to enable resizing a blob while I/O
are in progress to that blob on other threads. An explicit spdk_blob_sync_md() is still
required to sync the updated metadata to disk.
### Logical Volumes
A new `destroy_lvol_bdev` RPC method to delete logical volumes has been added.
Lvols now have their own UUIDs which replace previous LvolStoreUUID_BlobID combination.
New Snapshot and Clone functionalities have been added. User may create Snapshots of existing Lvols
and Clones of existing Snapshots.
See the [lvol snapshots](http://www.spdk.io/doc/logical_volumes.html#lvol_snapshots) documentation
for more details.
Resizing logical volumes is now supported via the `resize_lvol_bdev` RPC method.
### Lib
A set of changes were made in the SPDK's lib code altering
instances of calls to `exit()` and `abort()` to return a failure instead
wherever reasonably possible.
spdk_app_start() no longer exit()'s on an internal failure, but
instead returns a non-zero error status.
spdk_app_parse_args() no longer exit()'s on help, '-h', or an invalid
option, but instead returns SPDK_APP_PARSE_ARGS_HELP and
SPDK_APP_PARSE_ARGS_FAIL, respectively, and SPDK_APP_PARSE_ARGS_SUCCESS
on success.
spdk_pci_get_device() has been deprecated and will be removed in SPDK v18.07.
### I/O Channels
The prototype for spdk_poller_fn() has been modified; it now returns a value indicating
whether or not the poller did any work. Existing pollers will need to be updated to
return a value.
### iSCSI Target
The SPDK iSCSI target now supports the fd.io Vector Packet Processing (VPP) framework userspace
TCP/IP stack. See the [iSCSI VPP documentation](http://www.spdk.io/doc/iscsi.html#vpp) for more
details.
### iSCSI initiator
An iSCSI initiator bdev module has been added to SPDK. This module should be considered
experimental pending additional features and tests. More details can be found in
lib/bdev/iscsi/README.
### PMDK
The persistent memory (PMDK) bdev module is now enabled using `--with-pmdk` instead of
`--with-nvml`. This reflects the renaming of the persistent memory library from NVML to
PMDK.
### Virtio Block driver
A userspace driver for Virtio Block devices has been added. It was built on top of the
[Virtio](http://www.spdk.io/doc/virtio.html) library and can be managed similarly to
the Virtio SCSI driver. See the
[Virtio Block](http://www.spdk.io/doc/bdev.html#bdev_config_virtio_blk) reference for
more information.
### Virtio with 2MB hugepages
The previous 1GB hugepage limitation has now been lifted. A new `-g` command-line option
enables SPDK Virtio to work with 2MB hugepages.
See [2MB hugepages](http://www.spdk.io/doc/virtio.html#virtio_2mb) for details.
## v18.01: Blobstore Thin Provisioning
### Build System
The build system now includes a `make install` rule, including support for the common
`DESTDIR` and `prefix` variables as used in other build systems. Additionally, the prefix
may be set via the configure `--prefix` option. Example: `make install prefix=/usr`.
### RPC
A JSON RPC listener is now enabled by default using a UNIX domain socket at /var/run/spdk.sock.
A -r option command line option has been added to enable an alternative UNIX domain socket location,
or a TCP port in the format ip_addr:tcp_port (i.e. 127.0.0.1:5260). The Rpc configuration file
section is now deprecated and will be removed in the v18.04 release.
### I/O Channels
spdk_poller_register() and spdk_poller_unregister() were moved from the event
framework (include/spdk/event.h) to the I/O channel library
(include/spdk/io_channel.h). This allows code that doesn't depend on the event
framework to request registration and unregistration of pollers.
spdk_for_each_channel() now allows asynchronous operations during iteration.
Instead of immediately continuing the interation upon returning from the iteration
callback, the user must call spdk_for_each_channel_continue() to resume iteration.
### Block Device Abstraction Layer (bdev)
The poller abstraction was removed from the bdev layer. There is now a general purpose
abstraction for pollers available in include/spdk/io_channel.h
### Lib
A set of changes were made in the SPDK's lib code altering,
instances of calls to `exit()` and `abort()` to return a failure instead
wherever reasonably possible. This has resulted in return type changes of
the API for:
- spdk_env_init() from type `void` to `int`.
- spdk_mem_map_init() from type `void` to `int`.
Applications making use of these APIs should be modified to check for
a non-zero return value instead of relying on them to fail without return.
### NVMe Driver
SPDK now supports hotplug for vfio-attached devices. But there is one thing keep in mind:
Only physical removal events are supported; removing devices via the sysfs `remove` file will not work.
### NVMe-oF Target
Subsystems are no longer tied explicitly to CPU cores. Instead, connections are handed out to the available
cores round-robin. The "Core" option in the configuration file has been removed.
### Blobstore
A number of functions have been renamed:
- spdk_bs_md_resize_blob() => spdk_blob_resize()
- spdk_bs_md_sync_blob() => spdk_blob_sync_md()
- spdk_bs_md_close_blob() => spdk_blob_close()
- spdk_bs_md_get_xattr_names() => spdk_blob_get_xattr_names()
- spdk_bs_md_get_xattr_value() => spdk_blob_get_xattr_value()
- spdk_blob_md_set_xattr() => spdk_blob_set_xattr()
- spdk_blob_md_remove_xattr() => spdk_blob_remove_xattr()
- spdk_bs_md_create_blob() => spdk_bs_create_blob()
- spdk_bs_md_open_blob() => spdk_bs_open_blob()
- spdk_bs_md_delete_blob() => spdk_bs_delete_blob()
- spdk_bs_md_iter_first() => spdk_bs_iter_first()
- spdk_bs_md_iter_next() => spdk_bs_iter_next()
The function signature of spdk_blob_close() has changed. It now takes a struct spdk_blob * argument
rather than struct spdk_blob **.
The function signature of spdk_bs_iter_next() has changed. It now takes a struct spdk_blob * argument
rather than struct spdk_blob **.
Thin provisioning support has been added to the blobstore. It can be enabled by setting the
`thin_provision` flag in struct spdk_blob_opts when calling spdk_bs_create_blob_ext().
### NBD device
The NBD application (test/lib/bdev/nbd) has been removed; Same functionality can now be
achieved by using the test/app/bdev_svc application and start_nbd_disk RPC method.
See the [GPT](http://www.spdk.io/doc/bdev.html#bdev_config_gpt) documentation for more details.
### FIO plugin
SPDK `fio_plugin` now supports FIO 3.3. The support for previous FIO 2.21 has been dropped,
although it still remains to work for now. The new FIO contains huge amount of bugfixes and
it's recommended to do an update.
### Virtio library
Previously a part of the bdev_virtio module, now a separate library. Virtio is now available
via `spdk_internal/virtio.h` file. This is an internal interface to be used when implementing
new Virtio backends, namely Virtio-BLK.
### iSCSI
The MinConnectionIdleInterval parameter has been removed, and connections are no longer migrated
to an epoll/kqueue descriptor on the master core when idle.
## v17.10: Logical Volumes
### New dependencies
libuuid was added as new dependency for logical volumes.
libnuma is now required unconditionally now that the DPDK submodule has been updated to DPDK 17.08.
### Block Device Abstraction Layer (bdev)
An [fio](http://github.com/axboe/fio) plugin was added that can route
I/O to the bdev layer. See the [plugin documentation](https://github.com/spdk/spdk/tree/master/examples/bdev/fio_plugin/)
for more information.
spdk_bdev_unmap() was modified to take an offset and a length in bytes as
arguments instead of requiring the user to provide an array of SCSI
unmap descriptors. This limits unmaps to a single contiguous range.
spdk_bdev_write_zeroes() was introduced. It ensures that all specified blocks will be zeroed out.
If a block device doesn't natively support a write zeroes command, the bdev layer emulates it using
write commands.
New API functions that accept I/O parameters in units of blocks instead of bytes
have been added:
- spdk_bdev_read_blocks(), spdk_bdev_readv_blocks()
- spdk_bdev_write_blocks(), spdk_bdev_writev_blocks()
- spdk_bdev_write_zeroes_blocks()
- spdk_bdev_unmap_blocks()
The bdev layer now handles temporary out-of-memory I/O failures internally by queueing the I/O to be
retried later.
### Linux AIO bdev
The AIO bdev now allows the user to override the auto-detected block size.
### NVMe driver
The NVMe driver now recognizes the NVMe 1.3 Namespace Optimal I/O Boundary field.
NVMe 1.3 devices may report an optimal I/O boundary, which the driver will take
into account when splitting I/O requests.
The HotplugEnable option in `[Nvme]` sections of the configuration file is now
"No" by default. It was previously "Yes".
The NVMe library now includes a spdk_nvme_ns_get_ctrlr() function which returns the
NVMe Controller associated with a given namespace.
The NVMe library now allows the user to specify a host identifier when attaching
to a controller. The host identifier is used as part of the Reservations feature,
as well as in the NVMe-oF Connect command. The default host ID is also now a
randomly-generated UUID, and the default host NQN uses the host ID to generate
a UUID-based NQN.
spdk_nvme_connect() was added to allow the user to connect directly to a single
NVMe or NVMe-oF controller.
### NVMe-oF Target (nvmf_tgt)
The NVMe-oF target no longer requires any in-capsule data buffers to run, and
the feature is now entirely optional. Previously, at least 4 KiB in-capsule
data buffers were required.
NVMe-oF subsytems have a new configuration option, AllowAnyHost, to control
whether the host NQN whitelist is enforced when accepting new connections.
If no Host options have been specified and AllowAnyHost is disabled, the
connection will be denied; this is a behavior change from previous releases,
which allowed any host NQN to connect if the Host list was empty.
AllowAnyHost is disabled by default.
NVMe-oF namespaces may now be assigned arbitrary namespace IDs, and the number
of namespaces per subsystem is no longer limited.
The NVMe-oF target now supports the Write Zeroes command.
### Environment Abstraction Layer
A new default value, SPDK_MEMPOOL_DEFAULT_CACHE_SIZE, was added to provide
additional clarity when constructing spdk_mempools. Previously, -1 could be
passed and the library would choose a reasonable default, but this new value
makes it explicit that the default is being used.
### Blobstore
The blobstore super block now contains a bstype field to identify the type of the blobstore.
Existing code should be updated to fill out bstype when calling spdk_bs_init() and spdk_bs_load().
spdk_bs_destroy() was added to allow destroying blobstore on device
with an initialized blobstore.
spdk_bs_io_readv_blob() and spdk_bs_io_writev_blob() were added to enable
scattered payloads.
A CLI tool for blobstore has been added, allowing basic operations through either command
line or shell interface. See the [blobcli](https://github.com/spdk/spdk/tree/master/examples/blob/cli)
documentation for more details.
### Event Framework
The ability to set a thread name, previously only used by the reactor code, is
now part of the spdk_thread_allocate() API. Users may specify a thread name
which will show up in tools like `gdb`.
### Log
The spdk_trace_dump() function now takes a new parameter to allow the caller to
specify an output file handle (stdout or stderr, for example).
### Logical Volumes
Logical volumes library built on top of SPDK blobstore has been added.
It is possible to create logical volumes on top of other devices using RPC.
See the [logical volumes](http://www.spdk.io/doc/logical_volumes.html) documentation for more information.
### Persistent Memory
A new persistent memory bdev type has been added.
The persistent memory block device is built on top of [libpmemblk](http://pmem.io/nvml/libpmemblk/).
It is possible to create pmem devices on top of pmem pool files using RPC.
See the [Pmem Block Device](http://www.spdk.io/doc/bdev.html#bdev_config_pmem) documentation for more information.
### Virtio SCSI driver
A userspace driver for Virtio SCSI devices has been added.
The driver is capable of creating block devices on top of LUNs exposed by another SPDK vhost-scsi application.
See the [Virtio SCSI](http://www.spdk.io/doc/virtio.html) documentation and [Getting Started](http://www.spdk.io/doc/bdev.html#bdev_config_virtio_scsi) guide for more information.
### Vhost target
The vhost target application now supports live migration between QEMU instances.
## v17.07: Build system improvements, userspace vhost-blk target, and GPT bdev
### Build System
A `configure` script has been added to simplify the build configuration process.
The existing CONFIG file and `make CONFIG_...` options are also still supported.
Run `./configure --help` for information about available configuration options.
A DPDK submodule has been added to make building SPDK easier. If no `--with-dpdk`
option is specified to configure, the SPDK build system will automatically build a
known-good configuration of DPDK with the minimal options enabled. See the Building
section of README.md for more information.
A [Vagrant](https://www.vagrantup.com/) setup has been added to make it easier to
develop and use SPDK on systems without suitable NVMe hardware. See the Vagrant
section of README.md for more information.
### Userspace vhost-blk target
The vhost library and example app have been updated to support the vhost-blk
protocol in addition to the existing vhost-scsi protocol.
See the [vhost documentation](http://www.spdk.io/doc/vhost.html) for more details.
### Block device abstraction layer (bdev)
A GPT virtual block device has been added, which automatically exposes GPT partitions
with a special SPDK-specific partition type as bdevs.
See the [GPT bdev documentation](http://www.spdk.io/doc/bdev.md#bdev_config_gpt) for
more information.
### NVMe driver
The NVMe driver has been updated to support recent Intel SSDs, including the Intel®
Optane™ SSD DC P4800X series.
A workaround has been added for devices that failed to recognize register writes
during controller reset.
The NVMe driver now allocates request tracking objects on a per-queue basis. The
number of requests allowed on an I/O queue may be set during `spdk_nvme_probe()` by
modifying `io_queue_requests` in the opts structure.
The SPDK NVMe `fio_plugin` has been updated to support multiple threads (`numjobs`).
spdk_nvme_ctrlr_alloc_io_qpair() has been modified to allow the user to override
controller-level options for each individual I/O queue pair.
Existing callers with qprio == 0 can be updated to:
~~~
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, NULL, 0);
~~~
Callers that need to specify a non-default qprio should be updated to:
~~~
struct spdk_nvme_io_qpair_opts opts;
spdk_nvme_ctrlr_get_default_io_qpair_opts(ctrlr, &opts, sizeof(opts));
opts.qprio = SPDK_NVME_QPRIO_...;
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, &opts, sizeof(opts));
~~~
### Environment Abstraction Layer
The environment abstraction layer has been updated to include several new functions
in order to wrap additional DPDK functionality. See `include/spdk/env.h` for the
current set of functions.
### SPDK Performance Analysis with Intel® VTune™ Amplifier
Support for SPDK performance analysis has been added to Intel® VTune™ Amplifier 2018.
This analysis provides:
- I/O performance monitoring (calculating standard I/O metrics like IOPS, throughput, etc.)
- Tuning insights on the interplay of I/O and compute devices by estimating how many cores
would be reasonable to provide for SPDK to keep up with a current storage workload.
See the VTune Amplifier documentation for more information.
## v17.03: Blobstore and userspace vhost-scsi target
### Blobstore and BlobFS
The blobstore is a persistent, power-fail safe block allocator designed to be
used as the local storage system backing a higher-level storage service.
See the [blobstore documentation](http://www.spdk.io/doc/blob.html) for more details.
BlobFS adds basic filesystem functionality like filenames on top of the blobstore.
This release also includes a RocksDB Env implementation using BlobFS in place of the
kernel filesystem.
See the [BlobFS documentation](http://www.spdk.io/doc/blobfs.html) for more details.
### Userspace vhost-scsi target
A userspace implementation of the QEMU vhost-scsi protocol has been added.
The vhost target is capable of exporting SPDK bdevs to QEMU-based VMs as virtio devices.
See the [vhost documentation](http://www.spdk.io/doc/vhost.html) for more details.
### Event framework
The overhead of the main reactor event loop was reduced by optimizing the number of
calls to spdk_get_ticks() per iteration.
### NVMe library
The NVMe library will now automatically split readv/writev requests with scatter-gather
lists that do not map to valid PRP lists when the NVMe controller does not natively
support SGLs.
The `identify` and `perf` NVMe examples were modified to add a consistent format for
specifying remote NVMe over Fabrics devices via the `-r` option.
This is implemented using the new `spdk_nvme_transport_id_parse()` function.
### iSCSI Target
The [Nvme] section of the configuration file was modified to remove the `BDF` directive
and replace it with a `TransportID` directive. Both local (PCIe) and remote (NVMe-oF)
devices can now be specified as the backing block device. A script to generate an
entire [Nvme] section based on the local NVMe devices attached was added at
`scripts/gen_nvme.sh`.
### NVMe-oF Target
The [Nvme] section of the configuration file was modified to remove the `BDF` directive
and replace it with a `TransportID` directive. Both local (PCIe) and remote (NVMe-oF)
devices can now be specified as the backing block device. A script to generate an
entire [Nvme] section based on the local NVMe devices attached was added at
`scripts/gen_nvme.sh`.
## v16.12: NVMe over Fabrics host, hotplug, and multi-process
### NVMe library
The NVMe library has been changed to create its own request memory pool rather than
requiring the user to initialize the global `request_mempool` variable. Apps can be
updated by simply removing the initialization of `request_mempool`. Since the NVMe
library user no longer needs to know the size of the internal NVMe request
structure to create the pool, the `spdk_nvme_request_size()` function was also removed.
The `spdk_nvme_ns_cmd_deallocate()` function was renamed and extended to become
`spdk_nvme_ns_cmd_dataset_management()`, which allows access to all of the NVMe
Dataset Management command's parameters. Existing callers can be updated to use
`spdk_nvme_ns_cmd_dataset_management()` with `SPDK_NVME_DSM_ATTR_DEALLOCATE` as the
`type` parameter.
The NVMe library SGL callback prototype has been changed to return virtual addresses
rather than physical addresses. Callers of `spdk_nvme_ns_cmd_readv()` and
`spdk_nvme_ns_cmd_writev()` must update their `next_sge_fn` callbacks to match.
The NVMe library now supports NVMe over Fabrics devices in addition to the existing
support for local PCIe-attached NVMe devices. For an example of how to enable
NVMe over Fabrics support in an application, see `examples/nvme/identify` and
`examples/nvme/perf`.
Hot insert/remove support for NVMe devices has been added. To enable NVMe hotplug
support, an application should call the `spdk_nvme_probe()` function on a regular
basis to probe for new devices (reported via the existing `probe_cb` callback) and
removed devices (reported via a new `remove_cb` callback). Hotplug is currently
only supported on Linux with the `uio_pci_generic` driver, and newly-added NVMe
devices must be bound to `uio_pci_generic` by an external script or tool.
Multiple processes may now coordinate and use a single NVMe device simultaneously
using [DPDK Multi-process Support](http://dpdk.org/doc/guides/prog_guide/multi_proc_support.html).
### NVMe over Fabrics target (`nvmf_tgt`)
The `nvmf_tgt` configuration file format has been updated significantly to enable
new features. See the example configuration file `etc/spdk/nvmf.conf.in` for
more details on the new and changed options.
The NVMe over Fabrics target now supports virtual mode subsystems, which allow the
user to export devices from the SPDK block device abstraction layer as NVMe over
Fabrics subsystems. Direct mode (raw NVMe device access) is also still supported,
and a single `nvmf_tgt` may export both types of subsystems simultaneously.
### Block device abstraction layer (bdev)
The bdev layer now supports scatter/gather read and write I/O APIs, and the NVMe
blockdev driver has been updated to support scatter/gather. Apps can use the
new scatter/gather support via the `spdk_bdev_readv()` and `spdk_bdev_writev()`
functions.
The bdev status returned from each I/O has been extended to pass through NVMe
or SCSI status codes directly in cases where the underlying device can provide
a more specific status code.
A Ceph RBD (RADOS Block Device) blockdev driver has been added. This allows the
`iscsi_tgt` and `nvmf_tgt` apps to export Ceph RBD volumes as iSCSI LUNs or
NVMe namespaces.
### General changes
`libpciaccess` has been removed as a dependency and DPDK PCI enumeration is
used instead. Prior to DPDK 16.07 enumeration by class code was not supported,
so for earlier DPDK versions, only Intel SSD DC P3x00 devices will be discovered
by the NVMe library.
The `env` environment abstraction library has been introduced, and a default
DPDK-based implementation is provided as part of SPDK. The goal of the `env`
layer is to enable use of alternate user-mode memory allocation and PCI access
libraries. See `doc/porting.md` for more details.
The build process has been modified to produce all of the library files in the
`build/lib` directory. This is intended to simplify the use of SPDK from external
projects, which can now link to SPDK libraries by adding the `build/lib` directory
to the library path via `-L` and linking the SPDK libraries by name (for example,
`-lspdk_nvme -lspdk_log -lspdk_util`).
`nvmf_tgt` and `iscsi_tgt` now have a JSON-RPC interface, which allows the user
to query and modify the configuration at runtime. The RPC service is disabled by
default, since it currently does not provide any authentication or security
mechanisms; it should only be enabled on systems with controlled user access
behind a firewall. An example RPC client implemented in Python is provided in
`scripts/rpc.py`.
## v16.08: iSCSI target, NVMe over Fabrics maturity
This release adds a userspace iSCSI target. The iSCSI target is capable of exporting
NVMe devices over a network using the iSCSI protocol. The application is located
in app/iscsi_tgt and a documented configuration file can be found at etc/spdk/spdk.conf.in.
This release also significantly improves the existing NVMe over Fabrics target.
- The configuration file format was changed, which will require updates to
any existing nvmf.conf files (see `etc/spdk/nvmf.conf.in`):
- `SubsystemGroup` was renamed to `Subsystem`.
- `AuthFile` was removed (it was unimplemented).
- `nvmf_tgt` was updated to correctly recognize NQN (NVMe Qualified Names)
when naming subsystems. The default node name was changed to reflect this;
it is now "nqn.2016-06.io.spdk".
- `Port` and `Host` sections were merged into the `Subsystem` section
- Global options to control max queue depth, number of queues, max I/O
size, and max in-capsule data size were added.
- The Nvme section was removed. Now a list of devices is specified by
bus/device/function directly in the Subsystem section.
- Subsystems now have a Mode, which can be Direct or Virtual. This is an attempt
to future-proof the interface, so the only mode supported by this release
is "Direct".
- Many bug fixes and cleanups were applied to the `nvmf_tgt` app and library.
- The target now supports discovery.
This release also adds one new feature and provides some better examples and tools
for the NVMe driver.
- The Weighted Round Robin arbitration method is now supported. This allows
the user to specify different priorities on a per-I/O-queue basis. To
enable WRR, set the `arb_mechanism` field during `spdk_nvme_probe()`.
- A simplified "Hello World" example was added to show the proper way to use
the NVMe library API; see `examples/nvme/hello_world/hello_world.c`.
- A test for measuring software overhead was added. See `test/lib/nvme/overhead`.
## v16.06: NVMf userspace target
This release adds a userspace NVMf (NVMe over Fabrics) target, conforming to the
newly-released NVMf 1.0/NVMe 1.2.1 specification. The NVMf target exports NVMe
devices from a host machine over the network via RDMA. Currently, the target is
limited to directly exporting physical NVMe devices, and the discovery subsystem
is not supported.
This release includes a general API cleanup, including renaming all declarations
in public headers to include a `spdk` prefix to prevent namespace clashes with
user code.
- NVMe
- The `nvme_attach()` API was reworked into a new probe/attach model, which
moves device detection into the NVMe library. The new API also allows
parallel initialization of NVMe controllers, providing a major reduction in
startup time when using multiple controllers.
- I/O queue allocation was changed to be explicit in the API. Each function
that generates I/O requests now takes a queue pair (`spdk_nvme_qpair *`)
argument, and I/O queues may be allocated using
`spdk_nvme_ctrlr_alloc_io_qpair()`. This allows more flexible assignment of
queue pairs than the previous model, which only allowed a single queue
per thread and limited the total number of I/O queues to the lowest number
supported on any attached controller.
- Added support for the Write Zeroes command.
- `examples/nvme/perf` can now report I/O command latency from the
the controller's viewpoint using the Intel vendor-specific read/write latency
log page.
- Added namespace reservation command support, which can be used to coordinate
sharing of a namespace between multiple hosts.
- Added hardware SGL support, which enables use of scattered buffers that
don't conform to the PRP list alignment and length requirements on supported
NVMe controllers.
- Added end-to-end data protection support, including the ability to write and
read metadata in extended LBA (metadata appended to each block of data in the
buffer) and separate metadata buffer modes.
See `spdk_nvme_ns_cmd_write_with_md()` and `spdk_nvme_ns_cmd_read_with_md()`
for details.
- IOAT
- The DMA block fill feature is now exposed via the `ioat_submit_fill()`
function. This is functionally similar to `memset()`, except the memory is
filled with an 8-byte repeating pattern instead of a single byte like memset.
- PCI
- Added support for using DPDK for PCI device mapping in addition to the
existing libpciaccess option. Using the DPDK PCI support also allows use of
the Linux VFIO driver model, which means that SPDK userspace drivers will work
with the IOMMU enabled. Additionally, SPDK applications may be run as an
unprivileged user with access restricted to a specific set of PCIe devices.
- The PCI library API was made more generic to abstract away differences
between the underlying PCI access implementations.
## v1.2.0: IOAT user-space driver
This release adds a user-space driver with support for the Intel I/O Acceleration Technology (I/OAT, also known as "Crystal Beach") DMA offload engine.
- IOAT
- New user-space driver supporting DMA memory copy offload
- Example programs `ioat/perf` and `ioat/verify`
- Kernel-mode DMA engine test driver `kperf` for performance comparison
- NVMe
- Per-I/O flags for Force Unit Access (FUA) and Limited Retry
- Public API for retrieving log pages
- Reservation register/acquire/release/report command support
- Scattered payload support - an alternate API to provide I/O buffers via a sequence of callbacks
- Declarations and `nvme/identify` support for Intel SSD DC P3700 series vendor-specific log pages and features
- Updated to support DPDK 2.2.0
## v1.0.0: NVMe user-space driver
This is the initial open source release of the Storage Performance Development Kit (SPDK).
Features:
- NVMe user-space driver
- NVMe example programs
- `examples/nvme/perf` tests performance (IOPS) using the NVMe user-space driver
- `examples/nvme/identify` displays NVMe controller information in a human-readable format
- Linux and FreeBSD support
Reference in New Issue View Git Blame Copy Permalink