40b74cd343
This patch move the spdk_iscsi_conn_handle_queued_tasks() to the main loop of connection poller, make the logic more clear, it will also fix one issue of hotplug: for large read command, it has the potential risk: one task will be split into N subtaks, when primary task return error and try to send data in pdu, it will call spdk_iscsi_conn_handle_queued_tasks(), the primary task is pending now, and all the subtasks will return error from lun layer synchronous, this make the primary task return from the function spdk_iscsi_transfer_in() after all the other subtaks, but when the N - 1 subtask return from function spdk_iscsi_transfer_in(), it meet the condition: primary->bytes_completed == primary->scsi.transfer_len then it will send response pdu, after this, the primary task return from spdk_iscsi_transfer_in(), it also meet the condition, so it will also try to send response pdu, this will make the application run into error. Change-Id: I72206c1ce303f5fb6bd650713742d5819a88a30f Signed-off-by: Cunyin Chang <cunyin.chang@intel.com> Reviewed-on: https://review.gerrithub.io/370339 Tested-by: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
4669 lines
125 KiB
C
4669 lines
125 KiB
C
/*-
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright (C) 2008-2012 Daisuke Aoyama <aoyama@peach.ne.jp>.
|
|
* Copyright (c) Intel Corporation.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name of Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "spdk/stdinc.h"
|
|
|
|
#include <rte_config.h>
|
|
#include <rte_mempool.h>
|
|
|
|
#include "spdk/endian.h"
|
|
#include "spdk/env.h"
|
|
#include "spdk/trace.h"
|
|
#include "spdk/string.h"
|
|
#include "spdk/queue.h"
|
|
#include "spdk/conf.h"
|
|
#include "spdk/net.h"
|
|
#include "iscsi/crc32c.h"
|
|
#include "iscsi/md5.h"
|
|
#include "iscsi/iscsi.h"
|
|
#include "iscsi/param.h"
|
|
#include "iscsi/tgt_node.h"
|
|
#include "iscsi/task.h"
|
|
#include "iscsi/conn.h"
|
|
#include "spdk/scsi.h"
|
|
#include "spdk/bdev.h"
|
|
#include "iscsi/portal_grp.h"
|
|
#include "iscsi/acceptor.h"
|
|
|
|
#include "spdk_internal/log.h"
|
|
|
|
#define MAX_TMPBUF 1024
|
|
|
|
#ifdef __FreeBSD__
|
|
#define HAVE_SRANDOMDEV 1
|
|
#define HAVE_ARC4RANDOM 1
|
|
#endif
|
|
|
|
struct spdk_iscsi_globals g_spdk_iscsi;
|
|
|
|
/* random value generation */
|
|
static void spdk_gen_random(uint8_t *buf, size_t len);
|
|
#ifndef HAVE_SRANDOMDEV
|
|
static void srandomdev(void);
|
|
#endif /* HAVE_SRANDOMDEV */
|
|
#ifndef HAVE_ARC4RANDOM
|
|
//static uint32_t arc4random(void);
|
|
#endif /* HAVE_ARC4RANDOM */
|
|
|
|
/* convert from/to bin/hex */
|
|
static int spdk_bin2hex(char *buf, size_t len, const uint8_t *data, size_t data_len);
|
|
static int spdk_hex2bin(uint8_t *data, size_t data_len, const char *str);
|
|
|
|
|
|
static int spdk_add_transfer_task(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_task *task);
|
|
static int
|
|
spdk_iscsi_send_r2t(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_task *task, int offset,
|
|
int len, uint32_t transfer_tag, uint32_t *R2TSN);
|
|
static int
|
|
spdk_create_iscsi_sess(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_tgt_node *target,
|
|
enum session_type session_type);
|
|
static int
|
|
spdk_append_iscsi_sess(struct spdk_iscsi_conn *conn,
|
|
const char *initiator_port_name, uint16_t tsih, uint16_t cid);
|
|
static int
|
|
spdk_iscsi_send_r2t_recovery(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_task *r2t_task, uint32_t r2t_sn,
|
|
bool send_new_r2tsn);
|
|
static void
|
|
spdk_remove_acked_pdu(struct spdk_iscsi_conn *conn,
|
|
uint32_t ExpStatSN);
|
|
|
|
static int
|
|
spdk_iscsi_reject(struct spdk_iscsi_conn *conn, struct spdk_iscsi_pdu *pdu,
|
|
int reason);
|
|
|
|
#define DMIN32(A,B) ((uint32_t) ((uint32_t)(A) > (uint32_t)(B) ? (uint32_t)(B) : (uint32_t)(A)))
|
|
#define DMIN64(A,B) ((uint64_t) ((A) > (B) ? (B) : (A)))
|
|
|
|
#define MATCH_DIGEST_WORD(BUF, CRC32C) \
|
|
( ((((uint32_t) *((uint8_t *)(BUF)+0)) << 0) \
|
|
| (((uint32_t) *((uint8_t *)(BUF)+1)) << 8) \
|
|
| (((uint32_t) *((uint8_t *)(BUF)+2)) << 16) \
|
|
| (((uint32_t) *((uint8_t *)(BUF)+3)) << 24)) \
|
|
== (CRC32C))
|
|
|
|
#define MAKE_DIGEST_WORD(BUF, CRC32C) \
|
|
( ((*((uint8_t *)(BUF)+0)) = (uint8_t)((uint32_t)(CRC32C) >> 0)), \
|
|
((*((uint8_t *)(BUF)+1)) = (uint8_t)((uint32_t)(CRC32C) >> 8)), \
|
|
((*((uint8_t *)(BUF)+2)) = (uint8_t)((uint32_t)(CRC32C) >> 16)), \
|
|
((*((uint8_t *)(BUF)+3)) = (uint8_t)((uint32_t)(CRC32C) >> 24)))
|
|
|
|
#if 0
|
|
static int
|
|
spdk_match_digest_word(const uint8_t *buf, uint32_t crc32c)
|
|
{
|
|
uint32_t l;
|
|
|
|
l = (buf[0] & 0xffU) << 0;
|
|
l |= (buf[1] & 0xffU) << 8;
|
|
l |= (buf[2] & 0xffU) << 16;
|
|
l |= (buf[3] & 0xffU) << 24;
|
|
return (l == crc32c);
|
|
}
|
|
|
|
static uint8_t *
|
|
spdk_make_digest_word(uint8_t *buf, size_t len, uint32_t crc32c)
|
|
{
|
|
if (len < ISCSI_DIGEST_LEN)
|
|
return NULL;
|
|
|
|
buf[0] = (crc32c >> 0) & 0xffU;
|
|
buf[1] = (crc32c >> 8) & 0xffU;
|
|
buf[2] = (crc32c >> 16) & 0xffU;
|
|
buf[3] = (crc32c >> 24) & 0xffU;
|
|
return buf;
|
|
}
|
|
#endif
|
|
|
|
#ifndef HAVE_SRANDOMDEV
|
|
static void
|
|
srandomdev(void)
|
|
{
|
|
unsigned long seed;
|
|
time_t now;
|
|
pid_t pid;
|
|
|
|
pid = getpid();
|
|
now = time(NULL);
|
|
seed = pid ^ now;
|
|
srandom(seed);
|
|
}
|
|
#endif /* HAVE_SRANDOMDEV */
|
|
|
|
#ifndef HAVE_ARC4RANDOM
|
|
static int spdk_arc4random_initialized = 0;
|
|
|
|
static uint32_t
|
|
arc4random(void)
|
|
{
|
|
uint32_t r;
|
|
uint32_t r1, r2;
|
|
|
|
if (!spdk_arc4random_initialized) {
|
|
srandomdev();
|
|
spdk_arc4random_initialized = 1;
|
|
}
|
|
r1 = (uint32_t)(random() & 0xffff);
|
|
r2 = (uint32_t)(random() & 0xffff);
|
|
r = (r1 << 16) | r2;
|
|
return r;
|
|
}
|
|
#endif /* HAVE_ARC4RANDOM */
|
|
|
|
static void
|
|
spdk_gen_random(uint8_t *buf, size_t len)
|
|
{
|
|
#ifdef USE_RANDOM
|
|
long l;
|
|
size_t idx;
|
|
|
|
srandomdev();
|
|
for (idx = 0; idx < len; idx++) {
|
|
l = random();
|
|
buf[idx] = (uint8_t) l;
|
|
}
|
|
#else
|
|
uint32_t r;
|
|
size_t idx;
|
|
|
|
for (idx = 0; idx < len; idx++) {
|
|
r = arc4random();
|
|
buf[idx] = (uint8_t) r;
|
|
}
|
|
#endif /* USE_RANDOM */
|
|
}
|
|
|
|
static uint64_t
|
|
spdk_iscsi_get_isid(const uint8_t isid[6])
|
|
{
|
|
return (uint64_t)isid[0] << 40 |
|
|
(uint64_t)isid[1] << 32 |
|
|
(uint64_t)isid[2] << 24 |
|
|
(uint64_t)isid[3] << 16 |
|
|
(uint64_t)isid[4] << 8 |
|
|
(uint64_t)isid[5];
|
|
}
|
|
|
|
static int
|
|
spdk_bin2hex(char *buf, size_t len, const uint8_t *data, size_t data_len)
|
|
{
|
|
const char *digits = "0123456789ABCDEF";
|
|
size_t total = 0;
|
|
size_t idx;
|
|
|
|
if (len < 3)
|
|
return -1;
|
|
buf[total] = '0';
|
|
total++;
|
|
buf[total] = 'x';
|
|
total++;
|
|
buf[total] = '\0';
|
|
|
|
for (idx = 0; idx < data_len; idx++) {
|
|
if (total + 3 > len) {
|
|
buf[total] = '\0';
|
|
return - 1;
|
|
}
|
|
buf[total] = digits[(data[idx] >> 4) & 0x0fU];
|
|
total++;
|
|
buf[total] = digits[data[idx] & 0x0fU];
|
|
total++;
|
|
}
|
|
buf[total] = '\0';
|
|
return total;
|
|
}
|
|
|
|
static int
|
|
spdk_hex2bin(uint8_t *data, size_t data_len, const char *str)
|
|
{
|
|
const char *digits = "0123456789ABCDEF";
|
|
const char *dp;
|
|
const char *p;
|
|
size_t total = 0;
|
|
int n0, n1;
|
|
|
|
p = str;
|
|
if (p[0] != '0' && (p[1] != 'x' && p[1] != 'X'))
|
|
return -1;
|
|
p += 2;
|
|
|
|
while (p[0] != '\0' && p[1] != '\0') {
|
|
if (total >= data_len) {
|
|
return -1;
|
|
}
|
|
dp = strchr(digits, toupper((int) p[0]));
|
|
if (dp == NULL) {
|
|
return -1;
|
|
}
|
|
n0 = (int)(dp - digits);
|
|
dp = strchr(digits, toupper((int) p[1]));
|
|
if (dp == NULL) {
|
|
return -1;
|
|
}
|
|
n1 = (int)(dp - digits);
|
|
|
|
data[total] = (uint8_t)(((n0 & 0x0fU) << 4) | (n1 & 0x0fU));
|
|
total++;
|
|
p += 2;
|
|
}
|
|
return total;
|
|
}
|
|
|
|
static int
|
|
spdk_islun2lun(uint64_t islun)
|
|
{
|
|
uint64_t fmt_lun;
|
|
uint64_t method;
|
|
int lun_i;
|
|
|
|
fmt_lun = islun;
|
|
method = (fmt_lun >> 62) & 0x03U;
|
|
fmt_lun = fmt_lun >> 48;
|
|
if (method == 0x00U) {
|
|
lun_i = (int)(fmt_lun & 0x00ffU);
|
|
} else if (method == 0x01U) {
|
|
lun_i = (int)(fmt_lun & 0x3fffU);
|
|
} else {
|
|
lun_i = 0xffffU;
|
|
}
|
|
return lun_i;
|
|
}
|
|
|
|
static uint32_t
|
|
spdk_iscsi_pdu_calc_header_digest(struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
uint32_t crc32c;
|
|
uint32_t ahs_len_bytes = pdu->bhs.total_ahs_len * 4;
|
|
|
|
crc32c = SPDK_CRC32C_INITIAL;
|
|
crc32c = spdk_update_crc32c((uint8_t *)&pdu->bhs, ISCSI_BHS_LEN, crc32c);
|
|
|
|
if (ahs_len_bytes) {
|
|
crc32c = spdk_update_crc32c((uint8_t *)pdu->ahs, ahs_len_bytes, crc32c);
|
|
}
|
|
|
|
/* BHS and AHS are always 4-byte multiples in length, so no padding is necessary. */
|
|
crc32c = crc32c ^ SPDK_CRC32C_XOR;
|
|
return crc32c;
|
|
}
|
|
|
|
static uint32_t
|
|
spdk_iscsi_pdu_calc_data_digest(struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
uint32_t data_len = DGET24(pdu->bhs.data_segment_len);
|
|
uint32_t crc32c;
|
|
uint32_t mod;
|
|
|
|
crc32c = SPDK_CRC32C_INITIAL;
|
|
crc32c = spdk_update_crc32c(pdu->data, data_len, crc32c);
|
|
|
|
mod = data_len % ISCSI_ALIGNMENT;
|
|
if (mod != 0) {
|
|
uint32_t pad_length = ISCSI_ALIGNMENT - mod;
|
|
uint8_t pad[3] = {0, 0, 0};
|
|
|
|
assert(pad_length > 0);
|
|
assert(pad_length <= sizeof(pad));
|
|
crc32c = spdk_update_crc32c(pad, pad_length, crc32c);
|
|
}
|
|
|
|
crc32c = crc32c ^ SPDK_CRC32C_XOR;
|
|
return crc32c;
|
|
}
|
|
|
|
int
|
|
spdk_iscsi_read_pdu(struct spdk_iscsi_conn *conn, struct spdk_iscsi_pdu **_pdu)
|
|
{
|
|
struct spdk_iscsi_pdu *pdu;
|
|
struct rte_mempool *pool;
|
|
uint32_t crc32c;
|
|
int ahs_len;
|
|
int data_len;
|
|
int max_segment_len;
|
|
int rc;
|
|
|
|
if (conn->pdu_in_progress == NULL) {
|
|
conn->pdu_in_progress = spdk_get_pdu();
|
|
}
|
|
|
|
pdu = conn->pdu_in_progress;
|
|
|
|
if (pdu->bhs_valid_bytes < ISCSI_BHS_LEN) {
|
|
rc = spdk_iscsi_conn_read_data(conn,
|
|
ISCSI_BHS_LEN - pdu->bhs_valid_bytes,
|
|
(uint8_t *)&pdu->bhs + pdu->bhs_valid_bytes);
|
|
if (rc < 0) {
|
|
*_pdu = NULL;
|
|
spdk_put_pdu(pdu);
|
|
conn->pdu_in_progress = NULL;
|
|
return rc;
|
|
}
|
|
pdu->bhs_valid_bytes += rc;
|
|
if (pdu->bhs_valid_bytes < ISCSI_BHS_LEN) {
|
|
*_pdu = NULL;
|
|
return SPDK_SUCCESS;
|
|
}
|
|
}
|
|
|
|
data_len = ISCSI_ALIGN(DGET24(pdu->bhs.data_segment_len));
|
|
|
|
/* AHS */
|
|
ahs_len = pdu->bhs.total_ahs_len * 4;
|
|
assert(ahs_len <= ISCSI_AHS_LEN);
|
|
if (pdu->ahs_valid_bytes < ahs_len) {
|
|
rc = spdk_iscsi_conn_read_data(conn,
|
|
ahs_len - pdu->ahs_valid_bytes,
|
|
pdu->ahs + pdu->ahs_valid_bytes);
|
|
if (rc < 0) {
|
|
*_pdu = NULL;
|
|
spdk_put_pdu(pdu);
|
|
conn->pdu_in_progress = NULL;
|
|
return rc;
|
|
}
|
|
|
|
pdu->ahs_valid_bytes += rc;
|
|
if (pdu->ahs_valid_bytes < ahs_len) {
|
|
*_pdu = NULL;
|
|
return SPDK_SUCCESS;
|
|
}
|
|
}
|
|
|
|
/* Header Digest */
|
|
if (conn->header_digest &&
|
|
pdu->hdigest_valid_bytes < ISCSI_DIGEST_LEN) {
|
|
rc = spdk_iscsi_conn_read_data(conn,
|
|
ISCSI_DIGEST_LEN - pdu->hdigest_valid_bytes,
|
|
pdu->header_digest + pdu->hdigest_valid_bytes);
|
|
if (rc < 0) {
|
|
*_pdu = NULL;
|
|
spdk_put_pdu(pdu);
|
|
conn->pdu_in_progress = NULL;
|
|
return rc;
|
|
}
|
|
|
|
pdu->hdigest_valid_bytes += rc;
|
|
if (pdu->hdigest_valid_bytes < ISCSI_DIGEST_LEN) {
|
|
*_pdu = NULL;
|
|
return SPDK_SUCCESS;
|
|
}
|
|
}
|
|
|
|
/* copy the actual data into local buffer */
|
|
if (pdu->data_valid_bytes < data_len) {
|
|
if (pdu->data_buf == NULL) {
|
|
if (data_len <= spdk_get_immediate_data_buffer_size()) {
|
|
pool = g_spdk_iscsi.pdu_immediate_data_pool;
|
|
} else if (data_len <= spdk_get_data_out_buffer_size()) {
|
|
pool = g_spdk_iscsi.pdu_data_out_pool;
|
|
} else {
|
|
SPDK_ERRLOG("Data(%d) > MaxSegment(%d)\n",
|
|
data_len, spdk_get_data_out_buffer_size());
|
|
*_pdu = NULL;
|
|
spdk_put_pdu(pdu);
|
|
conn->pdu_in_progress = NULL;
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
rte_mempool_get(pool, (void **)&pdu->mobj);
|
|
if (pdu->mobj == NULL) {
|
|
*_pdu = NULL;
|
|
return SPDK_SUCCESS;
|
|
}
|
|
pdu->data_buf = pdu->mobj->buf;
|
|
}
|
|
|
|
rc = spdk_iscsi_conn_read_data(conn,
|
|
data_len - pdu->data_valid_bytes,
|
|
pdu->data_buf + pdu->data_valid_bytes);
|
|
if (rc < 0) {
|
|
*_pdu = NULL;
|
|
spdk_put_pdu(pdu);
|
|
conn->pdu_in_progress = NULL;
|
|
return rc;
|
|
}
|
|
|
|
pdu->data_valid_bytes += rc;
|
|
if (pdu->data_valid_bytes < data_len) {
|
|
*_pdu = NULL;
|
|
return SPDK_SUCCESS;
|
|
}
|
|
}
|
|
|
|
/* copy out the data digest */
|
|
if (conn->data_digest && data_len != 0 &&
|
|
pdu->ddigest_valid_bytes < ISCSI_DIGEST_LEN) {
|
|
rc = spdk_iscsi_conn_read_data(conn,
|
|
ISCSI_DIGEST_LEN - pdu->ddigest_valid_bytes,
|
|
pdu->data_digest + pdu->ddigest_valid_bytes);
|
|
if (rc < 0) {
|
|
*_pdu = NULL;
|
|
spdk_put_pdu(pdu);
|
|
conn->pdu_in_progress = NULL;
|
|
return rc;
|
|
}
|
|
|
|
pdu->ddigest_valid_bytes += rc;
|
|
if (pdu->ddigest_valid_bytes < ISCSI_DIGEST_LEN) {
|
|
*_pdu = NULL;
|
|
return SPDK_SUCCESS;
|
|
}
|
|
}
|
|
|
|
/* All data for this PDU has now been read from the socket. */
|
|
conn->pdu_in_progress = NULL;
|
|
|
|
spdk_trace_record(TRACE_READ_PDU, conn->id, pdu->data_valid_bytes,
|
|
(uintptr_t)pdu, pdu->bhs.opcode);
|
|
|
|
/* Data Segment */
|
|
if (data_len != 0) {
|
|
/*
|
|
* Determine the maximum segment length expected for this PDU.
|
|
* This will be used to make sure the initiator did not send
|
|
* us too much immediate data.
|
|
*
|
|
* This value is specified separately by the initiator and target,
|
|
* and not negotiated. So we can use the #define safely here,
|
|
* since the value is not dependent on the initiator's maximum
|
|
* segment lengths (FirstBurstLength/MaxRecvDataSegmentLength),
|
|
* and SPDK currently does not allow configuration of these values
|
|
* at runtime.
|
|
*/
|
|
if (conn->sess == NULL) {
|
|
/*
|
|
* If the connection does not yet have a session, then
|
|
* login is not complete and we use the 8KB default
|
|
* FirstBurstLength as our maximum data segment length
|
|
* value.
|
|
*/
|
|
max_segment_len = DEFAULT_FIRSTBURSTLENGTH;
|
|
} else if (pdu->bhs.opcode == ISCSI_OP_SCSI_DATAOUT) {
|
|
max_segment_len = spdk_get_data_out_buffer_size();
|
|
} else if (pdu->bhs.opcode == ISCSI_OP_NOPOUT) {
|
|
max_segment_len = g_spdk_iscsi.MaxRecvDataSegmentLength;
|
|
} else {
|
|
max_segment_len = spdk_get_immediate_data_buffer_size();
|
|
}
|
|
if (data_len > max_segment_len) {
|
|
SPDK_ERRLOG("Data(%d) > MaxSegment(%d)\n",
|
|
data_len, max_segment_len);
|
|
spdk_iscsi_reject(conn, pdu, ISCSI_REASON_PROTOCOL_ERROR);
|
|
spdk_put_pdu(pdu);
|
|
/*
|
|
* This PDU was rejected and will not be returned to
|
|
* the caller for execution. We do not want to
|
|
* drop the connection, so return SUCCESS here so that
|
|
* the caller will continue to attempt reading PDUs.
|
|
*/
|
|
return SPDK_SUCCESS;
|
|
}
|
|
|
|
pdu->data = pdu->data_buf;
|
|
pdu->data_from_mempool = true;
|
|
pdu->data_segment_len = data_len;
|
|
}
|
|
|
|
/* check digest */
|
|
if (conn->header_digest) {
|
|
crc32c = spdk_iscsi_pdu_calc_header_digest(pdu);
|
|
rc = MATCH_DIGEST_WORD(pdu->header_digest, crc32c);
|
|
if (rc == 0) {
|
|
SPDK_ERRLOG("header digest error (%s)\n", conn->initiator_name);
|
|
spdk_put_pdu(pdu);
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
}
|
|
if (conn->data_digest && data_len != 0) {
|
|
crc32c = spdk_iscsi_pdu_calc_data_digest(pdu);
|
|
rc = MATCH_DIGEST_WORD(pdu->data_digest, crc32c);
|
|
if (rc == 0) {
|
|
SPDK_ERRLOG("data digest error (%s)\n", conn->initiator_name);
|
|
spdk_put_pdu(pdu);
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
}
|
|
|
|
*_pdu = pdu;
|
|
return 1;
|
|
}
|
|
|
|
int
|
|
spdk_iscsi_build_iovecs(struct spdk_iscsi_conn *conn, struct iovec *iovec,
|
|
struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
int iovec_cnt = 0;
|
|
uint32_t crc32c;
|
|
int enable_digest;
|
|
int total_ahs_len;
|
|
int data_len;
|
|
|
|
total_ahs_len = pdu->bhs.total_ahs_len;
|
|
data_len = DGET24(pdu->bhs.data_segment_len);
|
|
|
|
enable_digest = 1;
|
|
if (pdu->bhs.opcode == ISCSI_OP_LOGIN_RSP) {
|
|
/* this PDU should be sent without digest */
|
|
enable_digest = 0;
|
|
}
|
|
|
|
/* BHS */
|
|
iovec[iovec_cnt].iov_base = &pdu->bhs;
|
|
iovec[iovec_cnt].iov_len = ISCSI_BHS_LEN;
|
|
iovec_cnt++;
|
|
|
|
/* AHS */
|
|
if (total_ahs_len > 0) {
|
|
iovec[iovec_cnt].iov_base = pdu->ahs;
|
|
iovec[iovec_cnt].iov_len = 4 * total_ahs_len;
|
|
iovec_cnt++;
|
|
}
|
|
|
|
/* Header Digest */
|
|
if (enable_digest && conn->header_digest) {
|
|
crc32c = spdk_iscsi_pdu_calc_header_digest(pdu);
|
|
MAKE_DIGEST_WORD(pdu->header_digest, crc32c);
|
|
|
|
iovec[iovec_cnt].iov_base = pdu->header_digest;
|
|
iovec[iovec_cnt].iov_len = ISCSI_DIGEST_LEN;
|
|
iovec_cnt++;
|
|
}
|
|
|
|
/* Data Segment */
|
|
if (data_len > 0) {
|
|
iovec[iovec_cnt].iov_base = pdu->data;
|
|
iovec[iovec_cnt].iov_len = ISCSI_ALIGN(data_len);
|
|
iovec_cnt++;
|
|
}
|
|
|
|
/* Data Digest */
|
|
if (enable_digest && conn->data_digest && data_len != 0) {
|
|
crc32c = spdk_iscsi_pdu_calc_data_digest(pdu);
|
|
MAKE_DIGEST_WORD(pdu->data_digest, crc32c);
|
|
|
|
iovec[iovec_cnt].iov_base = pdu->data_digest;
|
|
iovec[iovec_cnt].iov_len = ISCSI_DIGEST_LEN;
|
|
iovec_cnt++;
|
|
}
|
|
|
|
return iovec_cnt;
|
|
}
|
|
|
|
static void
|
|
spdk_iscsi_write_pdu(struct spdk_iscsi_conn *conn, struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
TAILQ_INSERT_TAIL(&conn->write_pdu_list, pdu, tailq);
|
|
}
|
|
|
|
static int
|
|
spdk_iscsi_append_text(struct spdk_iscsi_conn *conn __attribute__((
|
|
__unused__)), const char *key, const char *val, uint8_t *data, int alloc_len,
|
|
int data_len)
|
|
{
|
|
int total;
|
|
int len;
|
|
|
|
total = data_len;
|
|
if (alloc_len < 1) {
|
|
return 0;
|
|
}
|
|
if (total > alloc_len) {
|
|
total = alloc_len;
|
|
data[total - 1] = '\0';
|
|
return total;
|
|
}
|
|
|
|
if (alloc_len - total < 1) {
|
|
SPDK_ERRLOG("data space small %d\n", alloc_len);
|
|
return total;
|
|
}
|
|
len = snprintf((char *) data + total, alloc_len - total, "%s=%s",
|
|
key, val);
|
|
total += len + 1;
|
|
|
|
return total;
|
|
}
|
|
|
|
static int
|
|
spdk_iscsi_append_param(struct spdk_iscsi_conn *conn, const char *key,
|
|
uint8_t *data, int alloc_len, int data_len)
|
|
{
|
|
struct iscsi_param *param;
|
|
int rc;
|
|
|
|
param = spdk_iscsi_param_find(conn->params, key);
|
|
if (param == NULL) {
|
|
param = spdk_iscsi_param_find(conn->sess->params, key);
|
|
if (param == NULL) {
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "no key %.64s\n",
|
|
key);
|
|
return data_len;
|
|
}
|
|
}
|
|
rc = spdk_iscsi_append_text(conn, param->key, param->val, data,
|
|
alloc_len, data_len);
|
|
return rc;
|
|
}
|
|
|
|
static int
|
|
spdk_iscsi_chap_get_authinfo(struct iscsi_chap_auth *auth, const char *authfile,
|
|
const char *authuser, int ag_tag)
|
|
{
|
|
struct spdk_conf *config = NULL;
|
|
struct spdk_conf_section *sp;
|
|
const char *val;
|
|
const char *user, *muser;
|
|
const char *secret, *msecret;
|
|
int rc;
|
|
int i;
|
|
|
|
if (auth->user != NULL) {
|
|
free(auth->user);
|
|
free(auth->secret);
|
|
free(auth->muser);
|
|
free(auth->msecret);
|
|
auth->user = auth->secret = NULL;
|
|
auth->muser = auth->msecret = NULL;
|
|
}
|
|
|
|
/* read config files */
|
|
config = spdk_conf_allocate();
|
|
if (config == NULL) {
|
|
SPDK_ERRLOG("allocate config fail\n");
|
|
return -1;
|
|
}
|
|
rc = spdk_conf_read(config, authfile);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("auth conf error\n");
|
|
spdk_conf_free(config);
|
|
return -1;
|
|
}
|
|
//spdk_conf_print(config);
|
|
|
|
sp = spdk_conf_first_section(config);
|
|
while (sp != NULL) {
|
|
if (spdk_conf_section_match_prefix(sp, "AuthGroup")) {
|
|
int group = spdk_conf_section_get_num(sp);
|
|
|
|
if (group == 0) {
|
|
SPDK_ERRLOG("Group 0 is invalid\n");
|
|
spdk_conf_free(config);
|
|
return -1;
|
|
}
|
|
if (ag_tag != group) {
|
|
goto skip_ag_tag;
|
|
}
|
|
|
|
val = spdk_conf_section_get_val(sp, "Comment");
|
|
if (val != NULL) {
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG,
|
|
"Comment %s\n", val);
|
|
}
|
|
for (i = 0; ; i++) {
|
|
val = spdk_conf_section_get_nval(sp, "Auth", i);
|
|
if (val == NULL)
|
|
break;
|
|
user = spdk_conf_section_get_nmval(sp, "Auth", i, 0);
|
|
secret = spdk_conf_section_get_nmval(sp, "Auth", i, 1);
|
|
muser = spdk_conf_section_get_nmval(sp, "Auth", i, 2);
|
|
msecret = spdk_conf_section_get_nmval(sp, "Auth", i, 3);
|
|
if (user != NULL) {
|
|
if (strcasecmp(authuser, user) == 0) {
|
|
/* match user */
|
|
auth->user = xstrdup(user);
|
|
auth->secret = xstrdup(secret);
|
|
auth->muser = xstrdup(muser);
|
|
auth->msecret = xstrdup(msecret);
|
|
spdk_conf_free(config);
|
|
return 0;
|
|
}
|
|
} else {
|
|
SPDK_ERRLOG("Invalid Auth format, skip this line\n");
|
|
continue;
|
|
}
|
|
}
|
|
}
|
|
skip_ag_tag:
|
|
sp = spdk_conf_next_section(sp);
|
|
}
|
|
|
|
spdk_conf_free(config);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
spdk_iscsi_get_authinfo(struct spdk_iscsi_conn *conn, const char *authuser)
|
|
{
|
|
char *authfile = NULL;
|
|
int ag_tag;
|
|
int rc;
|
|
|
|
if (conn->sess->target != NULL) {
|
|
ag_tag = conn->sess->target->auth_group;
|
|
} else {
|
|
ag_tag = -1;
|
|
}
|
|
if (ag_tag < 0) {
|
|
pthread_mutex_lock(&g_spdk_iscsi.mutex);
|
|
ag_tag = g_spdk_iscsi.discovery_auth_group;
|
|
pthread_mutex_unlock(&g_spdk_iscsi.mutex);
|
|
}
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "ag_tag=%d\n", ag_tag);
|
|
|
|
pthread_mutex_lock(&g_spdk_iscsi.mutex);
|
|
authfile = strdup(g_spdk_iscsi.authfile);
|
|
pthread_mutex_unlock(&g_spdk_iscsi.mutex);
|
|
if (!authfile) {
|
|
perror("authfile");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
rc = spdk_iscsi_chap_get_authinfo(&conn->auth, authfile, authuser, ag_tag);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("chap_get_authinfo() failed\n");
|
|
free(authfile);
|
|
return -1;
|
|
}
|
|
free(authfile);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
spdk_iscsi_auth_params(struct spdk_iscsi_conn *conn,
|
|
struct iscsi_param *params, const char *method, uint8_t *data, int alloc_len,
|
|
int data_len)
|
|
{
|
|
char *in_val;
|
|
char *in_next;
|
|
char *new_val;
|
|
const char *val;
|
|
const char *user;
|
|
const char *response;
|
|
const char *challenge;
|
|
int total;
|
|
int rc;
|
|
|
|
if (conn == NULL || params == NULL || method == NULL) {
|
|
return -1;
|
|
}
|
|
if (strcasecmp(method, "CHAP") == 0) {
|
|
/* method OK */
|
|
} else {
|
|
SPDK_ERRLOG("unsupported AuthMethod %.64s\n", method);
|
|
return -1;
|
|
}
|
|
|
|
total = data_len;
|
|
if (alloc_len < 1) {
|
|
return 0;
|
|
}
|
|
if (total > alloc_len) {
|
|
total = alloc_len;
|
|
data[total - 1] = '\0';
|
|
return total;
|
|
}
|
|
|
|
/* for temporary store */
|
|
in_val = malloc(ISCSI_TEXT_MAX_VAL_LEN + 1);
|
|
if (!in_val) {
|
|
perror("in_val");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* CHAP method (RFC1994) */
|
|
if ((val = spdk_iscsi_param_get_val(params, "CHAP_A")) != NULL) {
|
|
if (conn->auth.chap_phase != ISCSI_CHAP_PHASE_WAIT_A) {
|
|
SPDK_ERRLOG("CHAP sequence error\n");
|
|
goto error_return;
|
|
}
|
|
|
|
/* CHAP_A is LIST type */
|
|
snprintf(in_val, ISCSI_TEXT_MAX_VAL_LEN + 1, "%s", val);
|
|
in_next = in_val;
|
|
while ((new_val = spdk_strsepq(&in_next, ",")) != NULL) {
|
|
if (strcasecmp(new_val, "5") == 0) {
|
|
/* CHAP with MD5 */
|
|
break;
|
|
}
|
|
}
|
|
if (new_val == NULL) {
|
|
snprintf(in_val, ISCSI_TEXT_MAX_VAL_LEN + 1, "%s", "Reject");
|
|
new_val = in_val;
|
|
spdk_iscsi_append_text(conn, "CHAP_A", new_val,
|
|
data, alloc_len, total);
|
|
goto error_return;
|
|
}
|
|
/* selected algorithm is 5 (MD5) */
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "got CHAP_A=%s\n", new_val);
|
|
total = spdk_iscsi_append_text(conn, "CHAP_A", new_val,
|
|
data, alloc_len, total);
|
|
|
|
/* Identifier is one octet */
|
|
spdk_gen_random(conn->auth.chap_id, 1);
|
|
snprintf(in_val, ISCSI_TEXT_MAX_VAL_LEN, "%d",
|
|
(int) conn->auth.chap_id[0]);
|
|
total = spdk_iscsi_append_text(conn, "CHAP_I", in_val,
|
|
data, alloc_len, total);
|
|
|
|
/* Challenge Value is a variable stream of octets */
|
|
/* (binary length MUST not exceed 1024 bytes) */
|
|
conn->auth.chap_challenge_len = ISCSI_CHAP_CHALLENGE_LEN;
|
|
spdk_gen_random(conn->auth.chap_challenge,
|
|
conn->auth.chap_challenge_len);
|
|
spdk_bin2hex(in_val, ISCSI_TEXT_MAX_VAL_LEN,
|
|
conn->auth.chap_challenge,
|
|
conn->auth.chap_challenge_len);
|
|
total = spdk_iscsi_append_text(conn, "CHAP_C", in_val,
|
|
data, alloc_len, total);
|
|
|
|
conn->auth.chap_phase = ISCSI_CHAP_PHASE_WAIT_NR;
|
|
} else if ((val = spdk_iscsi_param_get_val(params, "CHAP_N")) != NULL) {
|
|
uint8_t resmd5[SPDK_MD5DIGEST_LEN];
|
|
uint8_t tgtmd5[SPDK_MD5DIGEST_LEN];
|
|
struct spdk_md5ctx md5ctx;
|
|
|
|
user = val;
|
|
if (conn->auth.chap_phase != ISCSI_CHAP_PHASE_WAIT_NR) {
|
|
SPDK_ERRLOG("CHAP sequence error\n");
|
|
goto error_return;
|
|
}
|
|
|
|
response = spdk_iscsi_param_get_val(params, "CHAP_R");
|
|
if (response == NULL) {
|
|
SPDK_ERRLOG("no response\n");
|
|
goto error_return;
|
|
}
|
|
rc = spdk_hex2bin(resmd5, SPDK_MD5DIGEST_LEN, response);
|
|
if (rc < 0 || rc != SPDK_MD5DIGEST_LEN) {
|
|
SPDK_ERRLOG("response format error\n");
|
|
goto error_return;
|
|
}
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "got CHAP_N/CHAP_R\n");
|
|
|
|
rc = spdk_iscsi_get_authinfo(conn, val);
|
|
if (rc < 0) {
|
|
//SPDK_ERRLOG("auth user or secret is missing\n");
|
|
SPDK_ERRLOG("iscsi_get_authinfo() failed\n");
|
|
goto error_return;
|
|
}
|
|
if (conn->auth.user == NULL || conn->auth.secret == NULL) {
|
|
//SPDK_ERRLOG("auth user or secret is missing\n");
|
|
SPDK_ERRLOG("auth failed (user %.64s)\n", user);
|
|
goto error_return;
|
|
}
|
|
|
|
spdk_md5init(&md5ctx);
|
|
/* Identifier */
|
|
spdk_md5update(&md5ctx, conn->auth.chap_id, 1);
|
|
/* followed by secret */
|
|
spdk_md5update(&md5ctx, conn->auth.secret,
|
|
strlen(conn->auth.secret));
|
|
/* followed by Challenge Value */
|
|
spdk_md5update(&md5ctx, conn->auth.chap_challenge,
|
|
conn->auth.chap_challenge_len);
|
|
/* tgtmd5 is expecting Response Value */
|
|
spdk_md5final(tgtmd5, &md5ctx);
|
|
|
|
spdk_bin2hex(in_val, ISCSI_TEXT_MAX_VAL_LEN,
|
|
tgtmd5, SPDK_MD5DIGEST_LEN);
|
|
|
|
#if 0
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI, "tgtmd5=%s, resmd5=%s\n", in_val, response);
|
|
spdk_dump("tgtmd5", tgtmd5, SPDK_MD5DIGEST_LEN);
|
|
spdk_dump("resmd5", resmd5, SPDK_MD5DIGEST_LEN);
|
|
#endif
|
|
|
|
/* compare MD5 digest */
|
|
if (memcmp(tgtmd5, resmd5, SPDK_MD5DIGEST_LEN) != 0) {
|
|
/* not match */
|
|
//SPDK_ERRLOG("auth user or secret is missing\n");
|
|
SPDK_ERRLOG("auth failed (user %.64s)\n", user);
|
|
goto error_return;
|
|
}
|
|
/* OK initiator's secret */
|
|
conn->authenticated = 1;
|
|
|
|
/* mutual CHAP? */
|
|
val = spdk_iscsi_param_get_val(params, "CHAP_I");
|
|
if (val != NULL) {
|
|
conn->auth.chap_mid[0] = (uint8_t) strtol(val, NULL, 10);
|
|
challenge = spdk_iscsi_param_get_val(params, "CHAP_C");
|
|
if (challenge == NULL) {
|
|
SPDK_ERRLOG("CHAP sequence error\n");
|
|
goto error_return;
|
|
}
|
|
rc = spdk_hex2bin(conn->auth.chap_mchallenge,
|
|
ISCSI_CHAP_CHALLENGE_LEN,
|
|
challenge);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("challenge format error\n");
|
|
goto error_return;
|
|
}
|
|
conn->auth.chap_mchallenge_len = rc;
|
|
#if 0
|
|
spdk_dump("MChallenge", conn->auth.chap_mchallenge,
|
|
conn->auth.chap_mchallenge_len);
|
|
#endif
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG,
|
|
"got CHAP_I/CHAP_C\n");
|
|
|
|
if (conn->auth.muser == NULL || conn->auth.msecret == NULL) {
|
|
//SPDK_ERRLOG("mutual auth user or secret is missing\n");
|
|
SPDK_ERRLOG("auth failed (user %.64s)\n", user);
|
|
goto error_return;
|
|
}
|
|
|
|
spdk_md5init(&md5ctx);
|
|
/* Identifier */
|
|
spdk_md5update(&md5ctx, conn->auth.chap_mid, 1);
|
|
/* followed by secret */
|
|
spdk_md5update(&md5ctx, conn->auth.msecret,
|
|
strlen(conn->auth.msecret));
|
|
/* followed by Challenge Value */
|
|
spdk_md5update(&md5ctx, conn->auth.chap_mchallenge,
|
|
conn->auth.chap_mchallenge_len);
|
|
/* tgtmd5 is Response Value */
|
|
spdk_md5final(tgtmd5, &md5ctx);
|
|
|
|
spdk_bin2hex(in_val, ISCSI_TEXT_MAX_VAL_LEN,
|
|
tgtmd5, SPDK_MD5DIGEST_LEN);
|
|
|
|
total = spdk_iscsi_append_text(conn, "CHAP_N",
|
|
conn->auth.muser, data, alloc_len, total);
|
|
total = spdk_iscsi_append_text(conn, "CHAP_R",
|
|
in_val, data, alloc_len, total);
|
|
} else {
|
|
/* not mutual */
|
|
if (conn->req_mutual) {
|
|
SPDK_ERRLOG("required mutual CHAP\n");
|
|
goto error_return;
|
|
}
|
|
}
|
|
|
|
conn->auth.chap_phase = ISCSI_CHAP_PHASE_END;
|
|
} else {
|
|
/* not found CHAP keys */
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "start CHAP\n");
|
|
conn->auth.chap_phase = ISCSI_CHAP_PHASE_WAIT_A;
|
|
}
|
|
|
|
free(in_val);
|
|
return total;
|
|
|
|
error_return:
|
|
conn->auth.chap_phase = ISCSI_CHAP_PHASE_WAIT_A;
|
|
free(in_val);
|
|
return -1;
|
|
}
|
|
|
|
static int
|
|
spdk_iscsi_reject(struct spdk_iscsi_conn *conn, struct spdk_iscsi_pdu *pdu,
|
|
int reason)
|
|
{
|
|
struct spdk_iscsi_pdu *rsp_pdu;
|
|
struct iscsi_bhs_reject *rsph;
|
|
uint8_t *data;
|
|
int total_ahs_len;
|
|
int data_len;
|
|
int alloc_len;
|
|
|
|
total_ahs_len = pdu->bhs.total_ahs_len;
|
|
data_len = 0;
|
|
alloc_len = ISCSI_BHS_LEN + (4 * total_ahs_len);
|
|
|
|
if (conn->header_digest)
|
|
alloc_len += ISCSI_DIGEST_LEN;
|
|
|
|
data = malloc(alloc_len);
|
|
if (!data) {
|
|
perror("data");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(data, 0, alloc_len);
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "Reject PDU reason=%d\n", reason);
|
|
|
|
if (conn->sess != NULL) {
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI,
|
|
"StatSN=%u, ExpCmdSN=%u, MaxCmdSN=%u\n",
|
|
conn->StatSN, conn->sess->ExpCmdSN,
|
|
conn->sess->MaxCmdSN);
|
|
} else {
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI, "StatSN=%u\n", conn->StatSN);
|
|
}
|
|
|
|
memcpy(data, &pdu->bhs, ISCSI_BHS_LEN);
|
|
data_len += ISCSI_BHS_LEN;
|
|
|
|
if (total_ahs_len != 0) {
|
|
memcpy(data + data_len, pdu->ahs, (4 * total_ahs_len));
|
|
data_len += (4 * total_ahs_len);
|
|
}
|
|
|
|
if (conn->header_digest) {
|
|
memcpy(data + data_len, pdu->header_digest, ISCSI_DIGEST_LEN);
|
|
data_len += ISCSI_DIGEST_LEN;
|
|
}
|
|
|
|
rsp_pdu = spdk_get_pdu();
|
|
rsph = (struct iscsi_bhs_reject *)&rsp_pdu->bhs;
|
|
rsp_pdu->data = data;
|
|
rsph->opcode = ISCSI_OP_REJECT;
|
|
rsph->flags |= 0x80; /* bit 0 is default to 1 */
|
|
rsph->reason = reason;
|
|
DSET24(rsph->data_segment_len, data_len);
|
|
|
|
rsph->ffffffff = 0xffffffffU;
|
|
to_be32(&rsph->stat_sn, conn->StatSN);
|
|
conn->StatSN++;
|
|
|
|
if (conn->sess != NULL) {
|
|
to_be32(&rsph->exp_cmd_sn, conn->sess->ExpCmdSN);
|
|
to_be32(&rsph->max_cmd_sn, conn->sess->MaxCmdSN);
|
|
} else {
|
|
to_be32(&rsph->exp_cmd_sn, 1);
|
|
to_be32(&rsph->max_cmd_sn, 1);
|
|
}
|
|
|
|
SPDK_TRACEDUMP(SPDK_TRACE_DEBUG, "PDU", (void *)&rsp_pdu->bhs, ISCSI_BHS_LEN);
|
|
|
|
spdk_iscsi_write_pdu(conn, rsp_pdu);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
spdk_iscsi_check_values(struct spdk_iscsi_conn *conn)
|
|
{
|
|
if (conn->sess->FirstBurstLength > conn->sess->MaxBurstLength) {
|
|
SPDK_ERRLOG("FirstBurstLength(%d) > MaxBurstLength(%d)\n",
|
|
conn->sess->FirstBurstLength,
|
|
conn->sess->MaxBurstLength);
|
|
return -1;
|
|
}
|
|
if (conn->sess->FirstBurstLength > g_spdk_iscsi.FirstBurstLength) {
|
|
SPDK_ERRLOG("FirstBurstLength(%d) > iSCSI target restriction(%d)\n",
|
|
conn->sess->FirstBurstLength,
|
|
g_spdk_iscsi.FirstBurstLength);
|
|
return -1;
|
|
}
|
|
if (conn->sess->MaxBurstLength > 0x00ffffff) {
|
|
SPDK_ERRLOG("MaxBurstLength(%d) > 0x00ffffff\n",
|
|
conn->sess->MaxBurstLength);
|
|
return -1;
|
|
}
|
|
|
|
if (conn->MaxRecvDataSegmentLength < 512) {
|
|
SPDK_ERRLOG("MaxRecvDataSegmentLength(%d) < 512\n",
|
|
conn->MaxRecvDataSegmentLength);
|
|
return -1;
|
|
}
|
|
if (conn->MaxRecvDataSegmentLength > 0x00ffffff) {
|
|
SPDK_ERRLOG("MaxRecvDataSegmentLength(%d) > 0x00ffffff\n",
|
|
conn->MaxRecvDataSegmentLength);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* The response function of spdk_iscsi_op_login
|
|
* return:
|
|
* 0:success;
|
|
* -1:error;
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_response(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *rsp_pdu, struct iscsi_param *params)
|
|
{
|
|
struct iscsi_bhs_login_rsp *rsph;
|
|
int rc;
|
|
|
|
rsph = (struct iscsi_bhs_login_rsp *)&rsp_pdu->bhs;
|
|
rsph->version_max = ISCSI_VERSION;
|
|
rsph->version_act = ISCSI_VERSION;
|
|
DSET24(rsph->data_segment_len, rsp_pdu->data_segment_len);
|
|
|
|
to_be32(&rsph->stat_sn, conn->StatSN);
|
|
conn->StatSN++;
|
|
|
|
if (conn->sess != NULL) {
|
|
to_be32(&rsph->exp_cmd_sn, conn->sess->ExpCmdSN);
|
|
to_be32(&rsph->max_cmd_sn, conn->sess->MaxCmdSN);
|
|
} else {
|
|
to_be32(&rsph->exp_cmd_sn, rsp_pdu->cmd_sn);
|
|
to_be32(&rsph->max_cmd_sn, rsp_pdu->cmd_sn);
|
|
}
|
|
|
|
SPDK_TRACEDUMP(SPDK_TRACE_DEBUG, "PDU", (uint8_t *)rsph, ISCSI_BHS_LEN);
|
|
SPDK_TRACEDUMP(SPDK_TRACE_DEBUG, "DATA", rsp_pdu->data, rsp_pdu->data_segment_len);
|
|
|
|
/* Set T/CSG/NSG to reserved if login error. */
|
|
if (rsph->status_class != 0) {
|
|
rsph->flags &= ~ISCSI_LOGIN_TRANSIT;
|
|
rsph->flags &= ~ISCSI_LOGIN_CURRENT_STAGE_MASK;
|
|
rsph->flags &= ~ISCSI_LOGIN_NEXT_STAGE_MASK;
|
|
}
|
|
spdk_iscsi_write_pdu(conn, rsp_pdu);
|
|
|
|
/* after send PDU digest on/off */
|
|
if (conn->full_feature) {
|
|
/* update internal variables */
|
|
rc = spdk_iscsi_copy_param2var(conn);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("spdk_iscsi_copy_param2var() failed\n");
|
|
spdk_iscsi_param_free(params);
|
|
return -1;
|
|
}
|
|
/* check value */
|
|
rc = spdk_iscsi_check_values(conn);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_check_values() failed\n");
|
|
spdk_iscsi_param_free(params);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
spdk_iscsi_param_free(params);
|
|
return 0;
|
|
|
|
}
|
|
|
|
/*
|
|
* This function is used to del the original param and update it with new
|
|
* value
|
|
* return:
|
|
* 0: success
|
|
* otherwise: error
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_update_param(struct spdk_iscsi_conn *conn,
|
|
const char *key, const char *value,
|
|
const char *list)
|
|
{
|
|
int rc = 0;
|
|
struct iscsi_param *new_param, *orig_param;
|
|
int index;
|
|
|
|
orig_param = spdk_iscsi_param_find(conn->params, key);
|
|
if (orig_param == NULL) {
|
|
SPDK_ERRLOG("orig_param %s not found\n", key);
|
|
return SPDK_ISCSI_LOGIN_ERROR_PARAMETER;
|
|
}
|
|
|
|
index = orig_param->state_index;
|
|
rc = spdk_iscsi_param_del(&conn->params, key);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_del(%s) failed\n", key);
|
|
return SPDK_ISCSI_LOGIN_ERROR_PARAMETER;
|
|
}
|
|
rc = spdk_iscsi_param_add(&conn->params, key, value, list, ISPT_LIST);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_add() failed\n");
|
|
return SPDK_ISCSI_LOGIN_ERROR_PARAMETER;
|
|
}
|
|
new_param = spdk_iscsi_param_find(conn->params, key);
|
|
if (new_param == NULL) {
|
|
SPDK_ERRLOG("spdk_iscsi_param_find() failed\n");
|
|
return SPDK_ISCSI_LOGIN_ERROR_PARAMETER;
|
|
}
|
|
new_param->state_index = index;
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* The function which is used to handle the part of session discovery
|
|
* return:
|
|
* 0, success;
|
|
* otherwise: error;
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_session_discovery_chap(struct spdk_iscsi_conn *conn)
|
|
{
|
|
int rc = 0;
|
|
|
|
if (g_spdk_iscsi.no_discovery_auth) {
|
|
conn->req_auth = 0;
|
|
rc = spdk_iscsi_op_login_update_param(conn, "AuthMethod",
|
|
"None", "None");
|
|
if (rc < 0)
|
|
return rc;
|
|
} else if (g_spdk_iscsi.req_discovery_auth) {
|
|
conn->req_auth = 1;
|
|
rc = spdk_iscsi_op_login_update_param(conn, "AuthMethod",
|
|
"CHAP", "CHAP");
|
|
if (rc < 0)
|
|
return rc;
|
|
}
|
|
if (g_spdk_iscsi.req_discovery_auth_mutual)
|
|
conn->req_mutual = 1;
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
/*
|
|
* This function is used to update the param related with chap
|
|
* return:
|
|
* 0: success
|
|
* otherwise: error
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_negotiate_chap_param(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *rsp_pdu,
|
|
struct spdk_iscsi_tgt_node *target)
|
|
{
|
|
int rc;
|
|
|
|
if (target->auth_chap_disabled) {
|
|
conn->req_auth = 0;
|
|
rc = spdk_iscsi_op_login_update_param(conn, "AuthMethod",
|
|
"None", "None");
|
|
if (rc < 0)
|
|
return rc;
|
|
} else if (target->auth_chap_required) {
|
|
conn->req_auth = 1;
|
|
rc = spdk_iscsi_op_login_update_param(conn, "AuthMethod",
|
|
"CHAP", "CHAP");
|
|
if (rc < 0)
|
|
return rc;
|
|
}
|
|
|
|
if (target->auth_chap_mutual)
|
|
conn->req_mutual = 1;
|
|
|
|
if (target->header_digest) {
|
|
/*
|
|
* User specified header digests, so update the list of
|
|
* HeaderDigest values to remove "None" so that only
|
|
* initiators who support CRC32C can connect.
|
|
*/
|
|
rc = spdk_iscsi_op_login_update_param(conn, "HeaderDigest",
|
|
"CRC32C", "CRC32C");
|
|
if (rc < 0)
|
|
return rc;
|
|
}
|
|
|
|
if (target->data_digest) {
|
|
/*
|
|
* User specified data digests, so update the list of
|
|
* DataDigest values to remove "None" so that only
|
|
* initiators who support CRC32C can connect.
|
|
*/
|
|
rc = spdk_iscsi_op_login_update_param(conn, "DataDigest",
|
|
"CRC32C", "CRC32C");
|
|
if (rc < 0)
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function use to check the session
|
|
* return:
|
|
* 0, success
|
|
* otherwise: error
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_check_session(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *rsp_pdu,
|
|
char *initiator_port_name, int cid)
|
|
|
|
{
|
|
int rc = 0;
|
|
struct iscsi_bhs_login_rsp *rsph;
|
|
|
|
rsph = (struct iscsi_bhs_login_rsp *)&rsp_pdu->bhs;
|
|
/* check existing session */
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI, "isid=%"PRIx64", tsih=%u, cid=%u\n",
|
|
spdk_iscsi_get_isid(rsph->isid), from_be16(&rsph->tsih), cid);
|
|
if (rsph->tsih != 0) {
|
|
/* multiple connections */
|
|
rc = spdk_append_iscsi_sess(conn, initiator_port_name,
|
|
from_be16(&rsph->tsih), cid);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("isid=%"PRIx64", tsih=%u, cid=%u:"
|
|
"spdk_append_iscsi_sess() failed\n",
|
|
spdk_iscsi_get_isid(rsph->isid), from_be16(&rsph->tsih),
|
|
cid);
|
|
/* Can't include in session */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_CONN_ADD_FAIL;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
} else if (!g_spdk_iscsi.AllowDuplicateIsid) {
|
|
/* new session, drop old sess by the initiator */
|
|
spdk_iscsi_drop_conns(conn, initiator_port_name,
|
|
0 /* drop old */);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* This function is used to check the target info
|
|
* return:
|
|
* 0: success
|
|
* otherwise: error
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_check_target(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *rsp_pdu,
|
|
const char *target_name,
|
|
struct spdk_iscsi_tgt_node **target)
|
|
|
|
{
|
|
int rc;
|
|
struct iscsi_bhs_login_rsp *rsph;
|
|
|
|
rsph = (struct iscsi_bhs_login_rsp *)&rsp_pdu->bhs;
|
|
*target = spdk_iscsi_find_tgt_node(target_name);
|
|
if (*target == NULL) {
|
|
SPDK_WARNLOG("target %s not found\n", target_name);
|
|
/* Not found */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_TARGET_NOT_FOUND;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
rc = spdk_iscsi_tgt_node_access(conn, *target,
|
|
conn->initiator_name,
|
|
conn->initiator_addr);
|
|
if (rc < 0) {
|
|
SPDK_WARNLOG("lu_access() failed\n");
|
|
/* Not found */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_TARGET_NOT_FOUND;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
if (rc == 0) {
|
|
SPDK_ERRLOG("access denied\n");
|
|
/* Not found */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_TARGET_NOT_FOUND;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The function which is used to handle the part of normal login session
|
|
* return:
|
|
* 0, success;
|
|
* SPDK_ISCSI_LOGIN_ERROR_PARAMETER, parameter error;
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_session_normal(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *rsp_pdu,
|
|
char *initiator_port_name,
|
|
struct iscsi_param *params,
|
|
struct spdk_iscsi_tgt_node **target,
|
|
int cid)
|
|
{
|
|
const char *target_name;
|
|
const char *target_short_name;
|
|
struct iscsi_bhs_login_rsp *rsph;
|
|
int rc = 0;
|
|
|
|
rsph = (struct iscsi_bhs_login_rsp *)&rsp_pdu->bhs;
|
|
target_name = spdk_iscsi_param_get_val(params, "TargetName");
|
|
|
|
if (target_name == NULL) {
|
|
SPDK_ERRLOG("TargetName is empty\n");
|
|
/* Missing parameter */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_MISSING_PARMS;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
|
|
memset(conn->target_short_name, 0, MAX_TARGET_NAME);
|
|
target_short_name = strstr(target_name, ":");
|
|
if (target_short_name != NULL) {
|
|
target_short_name++; /* Advance past the ':' */
|
|
if (strlen(target_short_name) >= MAX_TARGET_NAME) {
|
|
SPDK_ERRLOG("Target Short Name (%s) is more than %u characters\n",
|
|
target_short_name, MAX_TARGET_NAME);
|
|
return rc;
|
|
}
|
|
snprintf(conn->target_short_name, MAX_TARGET_NAME, "%s",
|
|
target_short_name);
|
|
}
|
|
|
|
pthread_mutex_lock(&g_spdk_iscsi.mutex);
|
|
rc = spdk_iscsi_op_login_check_target(conn, rsp_pdu, target_name,
|
|
target);
|
|
pthread_mutex_unlock(&g_spdk_iscsi.mutex);
|
|
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
conn->target = *target;
|
|
conn->dev = (*target)->dev;
|
|
conn->target_port = spdk_scsi_dev_find_port_by_id((*target)->dev,
|
|
conn->portal->group->tag);
|
|
|
|
rc = spdk_iscsi_op_login_check_session(conn, rsp_pdu,
|
|
initiator_port_name, cid);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* force target flags */
|
|
pthread_mutex_lock(&((*target)->mutex));
|
|
rc = spdk_iscsi_op_login_negotiate_chap_param(conn, rsp_pdu, *target);
|
|
pthread_mutex_unlock(&((*target)->mutex));
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* This function is used to judge the session type
|
|
* return
|
|
* 0: success
|
|
* otherwise, error
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_session_type(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *rsp_pdu,
|
|
enum session_type *session_type,
|
|
struct iscsi_param *params)
|
|
{
|
|
const char *session_type_str;
|
|
struct iscsi_bhs_login_rsp *rsph;
|
|
|
|
rsph = (struct iscsi_bhs_login_rsp *)&rsp_pdu->bhs;
|
|
session_type_str = spdk_iscsi_param_get_val(params, "SessionType");
|
|
if (session_type_str == NULL) {
|
|
if (rsph->tsih != 0)
|
|
*session_type = SESSION_TYPE_NORMAL;
|
|
else {
|
|
SPDK_ERRLOG("SessionType is empty\n");
|
|
/* Missing parameter */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_MISSING_PARMS;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
} else {
|
|
if (strcasecmp(session_type_str, "Discovery") == 0)
|
|
*session_type = SESSION_TYPE_DISCOVERY;
|
|
else if (strcasecmp(session_type_str, "Normal") == 0)
|
|
*session_type = SESSION_TYPE_NORMAL;
|
|
else {
|
|
*session_type = SESSION_TYPE_INVALID;
|
|
SPDK_ERRLOG("SessionType is invalid\n");
|
|
/* Missing parameter */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_MISSING_PARMS;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
}
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "Session Type: %s\n", session_type_str);
|
|
|
|
return 0;
|
|
}
|
|
/*
|
|
* This function is used to initialize the port info
|
|
* return
|
|
* 0: success
|
|
* otherwise: error
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_initialize_port(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *rsp_pdu,
|
|
char *initiator_port_name,
|
|
uint32_t name_length,
|
|
struct iscsi_param *params)
|
|
{
|
|
const char *val;
|
|
struct iscsi_bhs_login_rsp *rsph;
|
|
rsph = (struct iscsi_bhs_login_rsp *)&rsp_pdu->bhs;
|
|
|
|
/* Initiator Name and Port */
|
|
val = spdk_iscsi_param_get_val(params, "InitiatorName");
|
|
if (val == NULL) {
|
|
SPDK_ERRLOG("InitiatorName is empty\n");
|
|
/* Missing parameter */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_MISSING_PARMS;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
snprintf(conn->initiator_name, sizeof(conn->initiator_name),
|
|
"%s", val);
|
|
snprintf(initiator_port_name, name_length,
|
|
"%s,i,0x%12.12" PRIx64, val, spdk_iscsi_get_isid(rsph->isid));
|
|
spdk_strlwr(conn->initiator_name);
|
|
spdk_strlwr(initiator_port_name);
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "Initiator name: %s\n",
|
|
conn->initiator_name);
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "Initiator port: %s\n",
|
|
initiator_port_name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function is used to set the info in the connection data structure
|
|
* return
|
|
* 0: success
|
|
* otherwise: error
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_set_conn_info(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *rsp_pdu,
|
|
char *initiator_port_name,
|
|
enum session_type session_type,
|
|
struct spdk_iscsi_tgt_node *target, int cid)
|
|
{
|
|
int rc = 0;
|
|
struct iscsi_bhs_login_rsp *rsph;
|
|
|
|
rsph = (struct iscsi_bhs_login_rsp *)&rsp_pdu->bhs;
|
|
conn->authenticated = 0;
|
|
conn->auth.chap_phase = ISCSI_CHAP_PHASE_WAIT_A;
|
|
conn->cid = cid;
|
|
|
|
if (conn->sess == NULL) {
|
|
/* new session */
|
|
rc = spdk_create_iscsi_sess(conn, target, session_type);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("create_sess() failed\n");
|
|
rsph->status_class = ISCSI_CLASS_TARGET_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_STATUS_NO_RESOURCES;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
|
|
/* initialize parameters */
|
|
conn->StatSN = from_be32(&rsph->stat_sn);
|
|
conn->sess->initiator_port = spdk_scsi_port_create(spdk_iscsi_get_isid(rsph->isid), 0,
|
|
initiator_port_name);
|
|
conn->sess->isid = spdk_iscsi_get_isid(rsph->isid);
|
|
conn->sess->target = target;
|
|
|
|
/* Discovery sessions will not have a target. */
|
|
if (target != NULL) {
|
|
conn->sess->queue_depth = target->queue_depth;
|
|
} else {
|
|
/*
|
|
* Assume discovery sessions have an effective command
|
|
* windows size of 1.
|
|
*/
|
|
conn->sess->queue_depth = 1;
|
|
}
|
|
conn->sess->ExpCmdSN = rsp_pdu->cmd_sn;
|
|
conn->sess->MaxCmdSN = rsp_pdu->cmd_sn + conn->sess->queue_depth - 1;
|
|
}
|
|
|
|
conn->initiator_port = conn->sess->initiator_port;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function is used to set the target info
|
|
* return
|
|
* 0: success
|
|
* otherwise: error
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_set_target_info(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *rsp_pdu,
|
|
enum session_type session_type,
|
|
int alloc_len,
|
|
struct spdk_iscsi_tgt_node *target)
|
|
{
|
|
char buf[MAX_TMPBUF];
|
|
const char *val;
|
|
int rc = 0;
|
|
struct spdk_iscsi_portal *portal = conn->portal;
|
|
|
|
/* declarative parameters */
|
|
if (target != NULL) {
|
|
pthread_mutex_lock(&target->mutex);
|
|
if (target->alias != NULL)
|
|
snprintf(buf, sizeof buf, "%s", target->alias);
|
|
else
|
|
snprintf(buf, sizeof buf, "%s", "");
|
|
pthread_mutex_unlock(&target->mutex);
|
|
rc = spdk_iscsi_param_set(conn->sess->params, "TargetAlias", buf);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_set() failed\n");
|
|
return SPDK_ISCSI_LOGIN_ERROR_PARAMETER;
|
|
}
|
|
}
|
|
snprintf(buf, sizeof buf, "%s:%s,%d", portal->host, portal->port,
|
|
portal->group->tag);
|
|
rc = spdk_iscsi_param_set(conn->sess->params, "TargetAddress", buf);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_set() failed\n");
|
|
return SPDK_ISCSI_LOGIN_ERROR_PARAMETER;
|
|
}
|
|
snprintf(buf, sizeof buf, "%d", portal->group->tag);
|
|
rc = spdk_iscsi_param_set(conn->sess->params, "TargetPortalGroupTag",
|
|
buf);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_set() failed\n");
|
|
return SPDK_ISCSI_LOGIN_ERROR_PARAMETER;
|
|
}
|
|
|
|
/* write in response */
|
|
if (target != NULL) {
|
|
val = spdk_iscsi_param_get_val(conn->sess->params, "TargetAlias");
|
|
if (val != NULL && strlen(val) != 0)
|
|
rsp_pdu->data_segment_len = spdk_iscsi_append_param(conn,
|
|
"TargetAlias",
|
|
rsp_pdu->data,
|
|
alloc_len,
|
|
rsp_pdu->data_segment_len);
|
|
|
|
if (session_type == SESSION_TYPE_DISCOVERY)
|
|
rsp_pdu->data_segment_len = spdk_iscsi_append_param(conn,
|
|
"TargetAddress",
|
|
rsp_pdu->data,
|
|
alloc_len,
|
|
rsp_pdu->data_segment_len);
|
|
|
|
rsp_pdu->data_segment_len = spdk_iscsi_append_param(conn,
|
|
"TargetPortalGroupTag",
|
|
rsp_pdu->data,
|
|
alloc_len,
|
|
rsp_pdu->data_segment_len);
|
|
}
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* This function is used to handle the login of iscsi initiator when there is
|
|
* no session
|
|
* return:
|
|
* 0, success;
|
|
* SPDK_ISCSI_LOGIN_ERROR_PARAMETER, parameter error;
|
|
* SPDK_ISCSI_LOGIN_ERROR_RESPONSE, used to notify the login fail.
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_phase_none(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *rsp_pdu,
|
|
struct iscsi_param *params,
|
|
int alloc_len, int cid)
|
|
{
|
|
enum session_type session_type;
|
|
char initiator_port_name[MAX_INITIATOR_NAME];
|
|
struct iscsi_bhs_login_rsp *rsph;
|
|
struct spdk_iscsi_tgt_node *target = NULL;
|
|
int rc = 0;
|
|
rsph = (struct iscsi_bhs_login_rsp *)&rsp_pdu->bhs;
|
|
|
|
conn->target = NULL;
|
|
conn->dev = NULL;
|
|
|
|
rc = spdk_iscsi_op_login_initialize_port(conn, rsp_pdu,
|
|
initiator_port_name,
|
|
MAX_INITIATOR_NAME,
|
|
params);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = spdk_iscsi_op_login_session_type(conn, rsp_pdu, &session_type,
|
|
params);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Target Name and Port */
|
|
if (session_type == SESSION_TYPE_NORMAL) {
|
|
rc = spdk_iscsi_op_login_session_normal(conn, rsp_pdu,
|
|
initiator_port_name,
|
|
params, &target, cid);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
} else if (session_type == SESSION_TYPE_DISCOVERY) {
|
|
target = NULL;
|
|
rsph->tsih = 0;
|
|
|
|
/* force target flags */
|
|
pthread_mutex_lock(&g_spdk_iscsi.mutex);
|
|
rc = spdk_iscsi_op_login_session_discovery_chap(conn);
|
|
pthread_mutex_unlock(&g_spdk_iscsi.mutex);
|
|
if (rc < 0)
|
|
return rc;
|
|
} else {
|
|
SPDK_ERRLOG("unknown session type\n");
|
|
/* Missing parameter */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_MISSING_PARMS;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
|
|
rc = spdk_iscsi_op_login_set_conn_info(conn, rsp_pdu,
|
|
initiator_port_name,
|
|
session_type, target, cid);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* limit conns on discovery session */
|
|
if (session_type == SESSION_TYPE_DISCOVERY) {
|
|
conn->sess->MaxConnections = 1;
|
|
rc = spdk_iscsi_param_set_int(conn->sess->params,
|
|
"MaxConnections",
|
|
conn->sess->MaxConnections);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_set_int() failed\n");
|
|
return SPDK_ISCSI_LOGIN_ERROR_PARAMETER;
|
|
}
|
|
}
|
|
|
|
rc = spdk_iscsi_op_login_set_target_info(conn, rsp_pdu, session_type,
|
|
alloc_len, target);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
return rc;
|
|
|
|
|
|
}
|
|
|
|
/*
|
|
* The function which is used to initalize the internal response data
|
|
* structure of iscsi login function.
|
|
* return:
|
|
* 0, success;
|
|
* otherwise, error;
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_rsp_init(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *pdu, struct spdk_iscsi_pdu *rsp_pdu,
|
|
struct iscsi_param **params, int *alloc_len, int *cid)
|
|
{
|
|
|
|
struct iscsi_bhs_login_req *reqh;
|
|
struct iscsi_bhs_login_rsp *rsph;
|
|
int rc;
|
|
|
|
rsph = (struct iscsi_bhs_login_rsp *)&rsp_pdu->bhs;
|
|
rsph->opcode = ISCSI_OP_LOGIN_RSP;
|
|
rsph->status_class = ISCSI_CLASS_SUCCESS;
|
|
rsph->status_detail = ISCSI_LOGIN_ACCEPT;
|
|
rsp_pdu->data_segment_len = 0;
|
|
|
|
/* Default MaxRecvDataSegmentLength - RFC3720(12.12) */
|
|
if (conn->MaxRecvDataSegmentLength < 8192) {
|
|
*alloc_len = 8192;
|
|
} else {
|
|
*alloc_len = conn->MaxRecvDataSegmentLength;
|
|
}
|
|
|
|
rsp_pdu->data = malloc(*alloc_len);
|
|
if (!rsp_pdu->data) {
|
|
perror("data");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(rsp_pdu->data, 0, *alloc_len);
|
|
|
|
reqh = (struct iscsi_bhs_login_req *)&pdu->bhs;
|
|
rsph->flags |= (reqh->flags & ISCSI_LOGIN_TRANSIT);
|
|
rsph->flags |= (reqh->flags & ISCSI_LOGIN_CONTINUE);
|
|
rsph->flags |= (reqh->flags & ISCSI_LOGIN_CURRENT_STAGE_MASK);
|
|
if (ISCSI_BHS_LOGIN_GET_TBIT(rsph->flags))
|
|
rsph->flags |= (reqh->flags & ISCSI_LOGIN_NEXT_STAGE_MASK);
|
|
|
|
/* We don't need to convert from network byte order. Just store it */
|
|
memcpy(&rsph->isid, reqh->isid, 6);
|
|
rsph->tsih = reqh->tsih;
|
|
rsph->itt = reqh->itt;
|
|
rsp_pdu->cmd_sn = from_be32(&reqh->cmd_sn);
|
|
*cid = from_be16(&reqh->cid);
|
|
|
|
if (rsph->tsih)
|
|
rsph->stat_sn = reqh->exp_stat_sn;
|
|
|
|
SPDK_TRACEDUMP(SPDK_TRACE_DEBUG, "PDU", (uint8_t *)&pdu->bhs, ISCSI_BHS_LEN);
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG,
|
|
"T=%d, C=%d, CSG=%d, NSG=%d, Min=%d, Max=%d, ITT=%x\n",
|
|
ISCSI_BHS_LOGIN_GET_TBIT(rsph->flags),
|
|
ISCSI_BHS_LOGIN_GET_CBIT(rsph->flags),
|
|
ISCSI_BHS_LOGIN_GET_CSG(rsph->flags),
|
|
ISCSI_BHS_LOGIN_GET_NSG(rsph->flags),
|
|
reqh->version_min, reqh->version_max, from_be32(&rsph->itt));
|
|
|
|
if (conn->sess != NULL) {
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI,
|
|
"CmdSN=%u, ExpStatSN=%u, StatSN=%u, ExpCmdSN=%u,"
|
|
"MaxCmdSN=%u\n", rsp_pdu->cmd_sn,
|
|
from_be32(&rsph->stat_sn), conn->StatSN,
|
|
conn->sess->ExpCmdSN,
|
|
conn->sess->MaxCmdSN);
|
|
} else {
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI,
|
|
"CmdSN=%u, ExpStatSN=%u, StatSN=%u\n",
|
|
rsp_pdu->cmd_sn, from_be32(&rsph->stat_sn),
|
|
conn->StatSN);
|
|
}
|
|
|
|
if (ISCSI_BHS_LOGIN_GET_TBIT(rsph->flags) &&
|
|
ISCSI_BHS_LOGIN_GET_CBIT(rsph->flags)) {
|
|
SPDK_ERRLOG("transit error\n");
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
/* make sure reqh->version_max < ISCSI_VERSION */
|
|
if (reqh->version_min > ISCSI_VERSION) {
|
|
SPDK_ERRLOG("unsupported version %d/%d\n", reqh->version_min,
|
|
reqh->version_max);
|
|
/* Unsupported version */
|
|
/* set all reserved flag to zero */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_UNSUPPORTED_VERSION;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
|
|
if ((ISCSI_BHS_LOGIN_GET_NSG(rsph->flags) == ISCSI_NSG_RESERVED_CODE) &&
|
|
ISCSI_BHS_LOGIN_GET_TBIT(rsph->flags)) {
|
|
/* set NSG to zero */
|
|
rsph->flags &= ~ISCSI_LOGIN_NEXT_STAGE_MASK;
|
|
/* also set other bits to zero */
|
|
rsph->flags &= ~ISCSI_LOGIN_TRANSIT;
|
|
rsph->flags &= ~ISCSI_LOGIN_CURRENT_STAGE_MASK;
|
|
SPDK_ERRLOG("Received reserved NSG code: %d\n", ISCSI_NSG_RESERVED_CODE);
|
|
/* Initiator error */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_INITIATOR_ERROR;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
|
|
/* store incoming parameters */
|
|
rc = spdk_iscsi_parse_params(params, pdu->data,
|
|
pdu->data_segment_len, ISCSI_BHS_LOGIN_GET_CBIT(reqh->flags),
|
|
&conn->partial_text_parameter);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_parse_params() failed\n");
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_INITIATOR_ERROR;
|
|
return SPDK_ISCSI_LOGIN_ERROR_PARAMETER;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* This function is used to set the csg bit case in rsp
|
|
* return:
|
|
* 0, success
|
|
* otherwise: error
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_rsp_handle_csg_bit(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *rsp_pdu,
|
|
struct iscsi_param *params, int alloc_len)
|
|
{
|
|
const char *auth_method;
|
|
int rc;
|
|
struct iscsi_bhs_login_rsp *rsph;
|
|
rsph = (struct iscsi_bhs_login_rsp *)&rsp_pdu->bhs;
|
|
|
|
switch (ISCSI_BHS_LOGIN_GET_CSG(rsph->flags)) {
|
|
case ISCSI_SECURITY_NEGOTIATION_PHASE:
|
|
/* SecurityNegotiation */
|
|
auth_method = spdk_iscsi_param_get_val(conn->params, "AuthMethod");
|
|
if (auth_method == NULL) {
|
|
SPDK_ERRLOG("AuthMethod is empty\n");
|
|
/* Missing parameter */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_MISSING_PARMS;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
if (strcasecmp(auth_method, "None") == 0)
|
|
conn->authenticated = 1;
|
|
else {
|
|
rc = spdk_iscsi_auth_params(conn, params, auth_method,
|
|
rsp_pdu->data, alloc_len,
|
|
rsp_pdu->data_segment_len);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_auth_params() failed\n");
|
|
/* Authentication failure */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_AUTHENT_FAIL;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
rsp_pdu->data_segment_len = rc;
|
|
if (conn->authenticated == 0) {
|
|
/* not complete */
|
|
rsph->flags &= ~ISCSI_LOGIN_TRANSIT;
|
|
} else {
|
|
if (conn->auth.chap_phase !=
|
|
ISCSI_CHAP_PHASE_END) {
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI,
|
|
"CHAP phase not "
|
|
"complete");
|
|
}
|
|
}
|
|
|
|
SPDK_TRACEDUMP(SPDK_TRACE_DEBUG, "Negotiated Auth Params",
|
|
rsp_pdu->data, rsp_pdu->data_segment_len);
|
|
}
|
|
break;
|
|
|
|
case ISCSI_OPERATIONAL_NEGOTIATION_PHASE:
|
|
/* LoginOperationalNegotiation */
|
|
if (conn->state == ISCSI_CONN_STATE_INVALID) {
|
|
if (conn->req_auth) {
|
|
/* Authentication failure */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_AUTHENT_FAIL;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
} else {
|
|
/* AuthMethod=None */
|
|
conn->authenticated = 1;
|
|
}
|
|
}
|
|
if (conn->authenticated == 0) {
|
|
SPDK_ERRLOG("authentication error\n");
|
|
/* Authentication failure */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_AUTHENT_FAIL;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
break;
|
|
|
|
case ISCSI_FULL_FEATURE_PHASE:
|
|
/* FullFeaturePhase */
|
|
SPDK_ERRLOG("XXX Login in FullFeaturePhase\n");
|
|
/* Initiator error */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_INITIATOR_ERROR;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
|
|
default:
|
|
SPDK_ERRLOG("unknown stage\n");
|
|
/* Initiator error */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_INITIATOR_ERROR;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/* This function is used to notify the session info
|
|
* return
|
|
* 0: success
|
|
* otherwise: error
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_notify_session_info(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *rsp_pdu)
|
|
{
|
|
struct spdk_iscsi_portal *portal = conn->portal;
|
|
struct iscsi_bhs_login_rsp *rsph;
|
|
|
|
rsph = (struct iscsi_bhs_login_rsp *)&rsp_pdu->bhs;
|
|
if (conn->sess->session_type == SESSION_TYPE_NORMAL) {
|
|
/* normal session */
|
|
SPDK_NOTICELOG("Login from %s (%s) on %s tgt_node%d"
|
|
" (%s:%s,%d), ISID=%"PRIx64", TSIH=%u,"
|
|
" CID=%u, HeaderDigest=%s, DataDigest=%s\n",
|
|
conn->initiator_name, conn->initiator_addr,
|
|
conn->target->name, conn->target->num,
|
|
portal->host, portal->port, portal->group->tag,
|
|
conn->sess->isid, conn->sess->tsih, conn->cid,
|
|
(spdk_iscsi_param_eq_val(conn->params, "HeaderDigest", "CRC32C")
|
|
? "on" : "off"),
|
|
(spdk_iscsi_param_eq_val(conn->params, "DataDigest", "CRC32C")
|
|
? "on" : "off"));
|
|
} else if (conn->sess->session_type == SESSION_TYPE_DISCOVERY) {
|
|
/* discovery session */
|
|
SPDK_NOTICELOG("Login(discovery) from %s (%s) on"
|
|
" (%s:%s,%d), ISID=%"PRIx64", TSIH=%u,"
|
|
" CID=%u, HeaderDigest=%s, DataDigest=%s\n",
|
|
conn->initiator_name, conn->initiator_addr,
|
|
portal->host, portal->port, portal->group->tag,
|
|
conn->sess->isid, conn->sess->tsih, conn->cid,
|
|
(spdk_iscsi_param_eq_val(conn->params, "HeaderDigest", "CRC32C")
|
|
? "on" : "off"),
|
|
(spdk_iscsi_param_eq_val(conn->params, "DataDigest", "CRC32C")
|
|
? "on" : "off"));
|
|
} else {
|
|
SPDK_ERRLOG("unknown session type\n");
|
|
/* Initiator error */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_INITIATOR_ERROR;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/*
|
|
* This function is to handle the tbit cases
|
|
* return
|
|
* 0: success
|
|
* otherwise error
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_rsp_handle_t_bit(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *rsp_pdu)
|
|
|
|
{
|
|
int rc;
|
|
struct iscsi_bhs_login_rsp *rsph;
|
|
rsph = (struct iscsi_bhs_login_rsp *)&rsp_pdu->bhs;
|
|
|
|
switch (ISCSI_BHS_LOGIN_GET_NSG(rsph->flags)) {
|
|
case ISCSI_SECURITY_NEGOTIATION_PHASE:
|
|
/* SecurityNegotiation */
|
|
conn->login_phase = ISCSI_SECURITY_NEGOTIATION_PHASE;
|
|
break;
|
|
|
|
case ISCSI_OPERATIONAL_NEGOTIATION_PHASE:
|
|
/* LoginOperationalNegotiation */
|
|
conn->login_phase = ISCSI_OPERATIONAL_NEGOTIATION_PHASE;
|
|
break;
|
|
|
|
case ISCSI_FULL_FEATURE_PHASE:
|
|
/* FullFeaturePhase */
|
|
conn->login_phase = ISCSI_FULL_FEATURE_PHASE;
|
|
to_be16(&rsph->tsih, conn->sess->tsih);
|
|
|
|
rc = spdk_iscsi_op_login_notify_session_info(conn, rsp_pdu);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
conn->full_feature = 1;
|
|
break;
|
|
|
|
default:
|
|
SPDK_ERRLOG("unknown stage\n");
|
|
/* Initiator error */
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_INITIATOR_ERROR;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* This function is used to set the values of the internal data structure used
|
|
* by spdk_iscsi_op_login function
|
|
* return:
|
|
* 0, used to notify the a successful login
|
|
* SPDK_ISCSI_LOGIN_ERROR_RESPONSE, used to notify a failure login.
|
|
*/
|
|
static int
|
|
spdk_iscsi_op_login_rsp_handle(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *rsp_pdu, struct iscsi_param **params,
|
|
int alloc_len)
|
|
{
|
|
int rc = 0;
|
|
struct iscsi_bhs_login_rsp *rsph;
|
|
rsph = (struct iscsi_bhs_login_rsp *)&rsp_pdu->bhs;
|
|
|
|
/* negotiate parameters */
|
|
rc = spdk_iscsi_negotiate_params(conn, params, rsp_pdu->data, alloc_len,
|
|
rsp_pdu->data_segment_len);
|
|
if (rc < 0) {
|
|
/*
|
|
* spdk_iscsi_negotiate_params just returns -1 on failure,
|
|
* so translate this into meaningful response codes and
|
|
* return values.
|
|
*/
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_INITIATOR_ERROR;
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
}
|
|
|
|
rsp_pdu->data_segment_len = rc;
|
|
SPDK_TRACEDUMP(SPDK_TRACE_DEBUG, "Negotiated Params", rsp_pdu->data, rc);
|
|
|
|
/* handle the CSG bit case */
|
|
rc = spdk_iscsi_op_login_rsp_handle_csg_bit(conn, rsp_pdu, *params,
|
|
alloc_len);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* handle the T bit case */
|
|
if (ISCSI_BHS_LOGIN_GET_TBIT(rsph->flags))
|
|
rc = spdk_iscsi_op_login_rsp_handle_t_bit(conn, rsp_pdu);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int
|
|
spdk_iscsi_op_login(struct spdk_iscsi_conn *conn, struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
int rc;
|
|
struct spdk_iscsi_pdu *rsp_pdu;
|
|
struct iscsi_param *params = NULL;
|
|
struct iscsi_param **params_p = ¶ms;
|
|
int alloc_len;
|
|
int cid;
|
|
|
|
|
|
if (conn->full_feature && conn->sess != NULL &&
|
|
conn->sess->session_type == SESSION_TYPE_DISCOVERY) {
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
|
|
|
|
rsp_pdu = spdk_get_pdu();
|
|
rc = spdk_iscsi_op_login_rsp_init(conn, pdu, rsp_pdu, params_p,
|
|
&alloc_len, &cid);
|
|
if (rc == SPDK_ISCSI_LOGIN_ERROR_RESPONSE || rc == SPDK_ISCSI_LOGIN_ERROR_PARAMETER) {
|
|
spdk_iscsi_op_login_response(conn, rsp_pdu, *params_p);
|
|
return rc;
|
|
}
|
|
|
|
/* For other values, we need to directly return */
|
|
if (rc < 0) {
|
|
spdk_put_pdu(rsp_pdu);
|
|
return rc;
|
|
}
|
|
|
|
if (conn->state == ISCSI_CONN_STATE_INVALID) {
|
|
rc = spdk_iscsi_op_login_phase_none(conn, rsp_pdu, *params_p,
|
|
alloc_len, cid);
|
|
if (rc == SPDK_ISCSI_LOGIN_ERROR_RESPONSE || rc == SPDK_ISCSI_LOGIN_ERROR_PARAMETER) {
|
|
spdk_iscsi_op_login_response(conn, rsp_pdu, *params_p);
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
rc = spdk_iscsi_op_login_rsp_handle(conn, rsp_pdu, params_p, alloc_len);
|
|
if (rc == SPDK_ISCSI_LOGIN_ERROR_RESPONSE) {
|
|
spdk_iscsi_op_login_response(conn, rsp_pdu, *params_p);
|
|
return rc;
|
|
}
|
|
|
|
rc = spdk_iscsi_op_login_response(conn, rsp_pdu, *params_p);
|
|
|
|
if (rc == 0) {
|
|
conn->state = ISCSI_CONN_STATE_RUNNING;
|
|
} else {
|
|
SPDK_ERRLOG("login error - connection will be destroyed\n");
|
|
}
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
static int
|
|
spdk_iscsi_op_text(struct spdk_iscsi_conn *conn, struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
struct iscsi_param *params = NULL;
|
|
struct iscsi_param **params_p = ¶ms;
|
|
struct spdk_iscsi_pdu *rsp_pdu;
|
|
uint8_t *data;
|
|
uint64_t lun;
|
|
uint32_t task_tag;
|
|
uint32_t CmdSN;
|
|
uint32_t ExpStatSN;
|
|
const char *val;
|
|
int F_bit, C_bit;
|
|
int data_len;
|
|
int alloc_len;
|
|
int rc;
|
|
struct iscsi_bhs_text_req *reqh;
|
|
struct iscsi_bhs_text_resp *rsph;
|
|
|
|
data_len = 0;
|
|
alloc_len = conn->MaxRecvDataSegmentLength;
|
|
|
|
reqh = (struct iscsi_bhs_text_req *)&pdu->bhs;
|
|
|
|
F_bit = !!(reqh->flags & ISCSI_FLAG_FINAL);
|
|
C_bit = !!(reqh->flags & ISCSI_TEXT_CONTINUE);
|
|
lun = from_be64(&reqh->lun);
|
|
task_tag = from_be32(&reqh->itt);
|
|
CmdSN = from_be32(&reqh->cmd_sn);
|
|
pdu->cmd_sn = CmdSN;
|
|
ExpStatSN = from_be32(&reqh->exp_stat_sn);
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "I=%d, F=%d, C=%d, ITT=%x, TTT=%x\n",
|
|
reqh->immediate, F_bit, C_bit, task_tag, from_be32(&reqh->ttt));
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI,
|
|
"CmdSN=%u, ExpStatSN=%u, StatSN=%u, ExpCmdSN=%u, MaxCmdSN=%u\n",
|
|
CmdSN, ExpStatSN, conn->StatSN, conn->sess->ExpCmdSN,
|
|
conn->sess->MaxCmdSN);
|
|
|
|
if (ExpStatSN != conn->StatSN) {
|
|
#if 0
|
|
SPDK_ERRLOG("StatSN(%u) error\n", ExpStatSN);
|
|
return -1;
|
|
#else
|
|
/* StarPort have a bug */
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI, "StatSN(%u) rewound\n", ExpStatSN);
|
|
conn->StatSN = ExpStatSN;
|
|
#endif
|
|
}
|
|
|
|
if (F_bit && C_bit) {
|
|
SPDK_ERRLOG("final and continue\n");
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* If this is the first text op in a sequence, save the ITT so we can
|
|
* compare it against the ITT for subsequent ops in the same sequence.
|
|
* If a subsequent text op in same sequence has a different ITT, reject
|
|
* that PDU.
|
|
*/
|
|
if (conn->sess->current_text_itt == 0xffffffffU) {
|
|
conn->sess->current_text_itt = task_tag;
|
|
} else if (conn->sess->current_text_itt != task_tag) {
|
|
SPDK_ERRLOG("The correct itt is %u, and the current itt is %u...\n",
|
|
conn->sess->current_text_itt, task_tag);
|
|
return spdk_iscsi_reject(conn, pdu, ISCSI_REASON_PROTOCOL_ERROR);
|
|
}
|
|
|
|
/* store incoming parameters */
|
|
rc = spdk_iscsi_parse_params(¶ms, pdu->data,
|
|
pdu->data_segment_len, C_bit, &conn->partial_text_parameter);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_parse_params() failed\n");
|
|
spdk_iscsi_param_free(params);
|
|
return -1;
|
|
}
|
|
|
|
data = malloc(alloc_len);
|
|
if (!data) {
|
|
perror("data");
|
|
spdk_iscsi_param_free(params);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(data, 0, alloc_len);
|
|
|
|
/* negotiate parameters */
|
|
data_len = spdk_iscsi_negotiate_params(conn, params_p,
|
|
data, alloc_len, data_len);
|
|
if (data_len < 0) {
|
|
SPDK_ERRLOG("spdk_iscsi_negotiate_params() failed\n");
|
|
spdk_iscsi_param_free(*params_p);
|
|
free(data);
|
|
return -1;
|
|
}
|
|
|
|
/* sendtargets is special case */
|
|
val = spdk_iscsi_param_get_val(*params_p, "SendTargets");
|
|
if (val != NULL) {
|
|
if (spdk_iscsi_param_eq_val(conn->sess->params,
|
|
"SessionType", "Discovery")) {
|
|
if (strcasecmp(val, "") == 0)
|
|
val = "ALL";
|
|
|
|
data_len = spdk_iscsi_send_tgts(conn,
|
|
conn->initiator_name,
|
|
conn->initiator_addr,
|
|
val, data, alloc_len,
|
|
data_len);
|
|
} else {
|
|
if (strcasecmp(val, "") == 0)
|
|
val = conn->target->name;
|
|
|
|
if (strcasecmp(val, "ALL") == 0) {
|
|
/* not in discovery session */
|
|
data_len = spdk_iscsi_append_text(conn,
|
|
"SendTargets",
|
|
"Reject", data,
|
|
alloc_len,
|
|
data_len);
|
|
} else {
|
|
data_len = spdk_iscsi_send_tgts(conn,
|
|
conn->initiator_name,
|
|
conn->initiator_addr,
|
|
val, data, alloc_len,
|
|
data_len);
|
|
}
|
|
}
|
|
} else {
|
|
if (spdk_iscsi_param_eq_val(conn->sess->params,
|
|
"SessionType", "Discovery")) {
|
|
free(data);
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
}
|
|
|
|
SPDK_TRACEDUMP(SPDK_TRACE_DEBUG, "Negotiated Params", data, data_len);
|
|
|
|
/* response PDU */
|
|
rsp_pdu = spdk_get_pdu();
|
|
rsph = (struct iscsi_bhs_text_resp *)&rsp_pdu->bhs;
|
|
|
|
rsp_pdu->data = data;
|
|
rsph->opcode = ISCSI_OP_TEXT_RSP;
|
|
|
|
if (F_bit)
|
|
rsph->flags |= ISCSI_FLAG_FINAL;
|
|
|
|
if (C_bit)
|
|
rsph->flags |= ISCSI_TEXT_CONTINUE;
|
|
|
|
DSET24(rsph->data_segment_len, data_len);
|
|
to_be64(&rsph->lun, lun);
|
|
to_be32(&rsph->itt, task_tag);
|
|
|
|
if (F_bit) {
|
|
rsph->ttt = 0xffffffffU;
|
|
conn->sess->current_text_itt = 0xffffffffU;
|
|
} else {
|
|
to_be32(&rsph->ttt, 1 + conn->id);
|
|
}
|
|
|
|
to_be32(&rsph->stat_sn, conn->StatSN);
|
|
conn->StatSN++;
|
|
|
|
if (reqh->immediate == 0) {
|
|
conn->sess->MaxCmdSN++;
|
|
}
|
|
|
|
to_be32(&rsph->exp_cmd_sn, conn->sess->ExpCmdSN);
|
|
to_be32(&rsph->max_cmd_sn, conn->sess->MaxCmdSN);
|
|
|
|
spdk_iscsi_write_pdu(conn, rsp_pdu);
|
|
|
|
/* update internal variables */
|
|
rc = spdk_iscsi_copy_param2var(conn);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("spdk_iscsi_copy_param2var() failed\n");
|
|
spdk_iscsi_param_free(*params_p);
|
|
return -1;
|
|
}
|
|
|
|
/* check value */
|
|
rc = spdk_iscsi_check_values(conn);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_check_values() failed\n");
|
|
spdk_iscsi_param_free(*params_p);
|
|
return -1;
|
|
}
|
|
|
|
spdk_iscsi_param_free(*params_p);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
spdk_iscsi_op_logout(struct spdk_iscsi_conn *conn, struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
char buf[MAX_TMPBUF];
|
|
struct spdk_iscsi_pdu *rsp_pdu;
|
|
uint32_t task_tag;
|
|
uint32_t CmdSN;
|
|
uint32_t ExpStatSN;
|
|
int response;
|
|
struct iscsi_bhs_logout_req *reqh;
|
|
struct iscsi_bhs_logout_resp *rsph;
|
|
uint16_t cid;
|
|
#ifdef DEBUG
|
|
int reason;
|
|
#endif
|
|
|
|
reqh = (struct iscsi_bhs_logout_req *)&pdu->bhs;
|
|
|
|
#ifdef DEBUG
|
|
reason = reqh->reason & ISCSI_LOGOUT_REASON_MASK;
|
|
#endif
|
|
cid = from_be16(&reqh->cid);
|
|
task_tag = from_be32(&reqh->itt);
|
|
CmdSN = from_be32(&reqh->cmd_sn);
|
|
pdu->cmd_sn = CmdSN;
|
|
ExpStatSN = from_be32(&reqh->exp_stat_sn);
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "reason=%d, ITT=%x, cid=%d\n",
|
|
reason, task_tag, cid);
|
|
|
|
if (reqh->reason != 0 && conn->sess->session_type == SESSION_TYPE_DISCOVERY) {
|
|
SPDK_ERRLOG("only logout with close the session reason can be in discovery session");
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
|
|
}
|
|
|
|
|
|
if (conn->sess != NULL) {
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI,
|
|
"CmdSN=%u, ExpStatSN=%u, StatSN=%u, ExpCmdSN=%u, MaxCmdSN=%u\n",
|
|
CmdSN, ExpStatSN, conn->StatSN,
|
|
conn->sess->ExpCmdSN, conn->sess->MaxCmdSN);
|
|
|
|
if (CmdSN != conn->sess->ExpCmdSN) {
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI, "CmdSN(%u) might have dropped\n", CmdSN);
|
|
/* ignore error */
|
|
}
|
|
} else {
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI,
|
|
"CmdSN=%u, ExpStatSN=%u, StatSN=%u\n",
|
|
CmdSN, ExpStatSN, conn->StatSN);
|
|
}
|
|
|
|
if (ExpStatSN != conn->StatSN) {
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI, "StatSN(%u/%u) might have dropped\n",
|
|
ExpStatSN, conn->StatSN);
|
|
/* ignore error */
|
|
}
|
|
|
|
if (conn->id == cid) {
|
|
response = 0; // connection or session closed successfully
|
|
spdk_iscsi_conn_logout(conn);
|
|
} else {
|
|
response = 1;
|
|
}
|
|
|
|
/* response PDU */
|
|
rsp_pdu = spdk_get_pdu();
|
|
rsph = (struct iscsi_bhs_logout_resp *)&rsp_pdu->bhs;
|
|
rsp_pdu->data = NULL;
|
|
rsph->opcode = ISCSI_OP_LOGOUT_RSP;
|
|
rsph->flags |= 0x80; /* bit 0 must be 1 */
|
|
rsph->response = response;
|
|
DSET24(rsph->data_segment_len, 0);
|
|
to_be32(&rsph->itt, task_tag);
|
|
|
|
if (conn->sess != NULL) {
|
|
to_be32(&rsph->stat_sn, conn->StatSN);
|
|
conn->StatSN++;
|
|
|
|
if (conn->sess->connections == 1) {
|
|
conn->sess->MaxCmdSN++;
|
|
}
|
|
|
|
to_be32(&rsph->exp_cmd_sn, conn->sess->ExpCmdSN);
|
|
to_be32(&rsph->max_cmd_sn, conn->sess->MaxCmdSN);
|
|
} else {
|
|
to_be32(&rsph->stat_sn, conn->StatSN);
|
|
conn->StatSN++;
|
|
to_be32(&rsph->exp_cmd_sn, CmdSN);
|
|
to_be32(&rsph->max_cmd_sn, CmdSN);
|
|
}
|
|
|
|
rsph->time_2_wait = 0;
|
|
rsph->time_2_retain = 0;
|
|
|
|
spdk_iscsi_write_pdu(conn, rsp_pdu);
|
|
|
|
if (conn->sess == NULL) {
|
|
/*
|
|
* login failed but initiator still sent a logout rather than
|
|
* just closing the TCP connection.
|
|
*/
|
|
snprintf(buf, sizeof buf, "Logout(login failed) from %s (%s) on"
|
|
" (%s:%s,%d)\n",
|
|
conn->initiator_name, conn->initiator_addr,
|
|
conn->portal->host, conn->portal->port, conn->portal->group->tag);
|
|
} else if (spdk_iscsi_param_eq_val(conn->sess->params, "SessionType", "Normal")) {
|
|
snprintf(buf, sizeof buf, "Logout from %s (%s) on %s tgt_node%d"
|
|
" (%s:%s,%d), ISID=%"PRIx64", TSIH=%u,"
|
|
" CID=%u, HeaderDigest=%s, DataDigest=%s\n",
|
|
conn->initiator_name, conn->initiator_addr,
|
|
conn->target->name, conn->target->num,
|
|
conn->portal->host, conn->portal->port, conn->portal->group->tag,
|
|
conn->sess->isid, conn->sess->tsih, conn->cid,
|
|
(spdk_iscsi_param_eq_val(conn->params, "HeaderDigest", "CRC32C")
|
|
? "on" : "off"),
|
|
(spdk_iscsi_param_eq_val(conn->params, "DataDigest", "CRC32C")
|
|
? "on" : "off"));
|
|
} else {
|
|
/* discovery session */
|
|
snprintf(buf, sizeof buf, "Logout(discovery) from %s (%s) on"
|
|
" (%s:%s,%d), ISID=%"PRIx64", TSIH=%u,"
|
|
" CID=%u, HeaderDigest=%s, DataDigest=%s\n",
|
|
conn->initiator_name, conn->initiator_addr,
|
|
conn->portal->host, conn->portal->port, conn->portal->group->tag,
|
|
conn->sess->isid, conn->sess->tsih, conn->cid,
|
|
(spdk_iscsi_param_eq_val(conn->params, "HeaderDigest", "CRC32C")
|
|
? "on" : "off"),
|
|
(spdk_iscsi_param_eq_val(conn->params, "DataDigest", "CRC32C")
|
|
? "on" : "off"));
|
|
}
|
|
|
|
SPDK_NOTICELOG("%s", buf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function returns the spdk_scsi_task by searching the snack list via
|
|
* task transfertag and the pdu's opcode
|
|
*/
|
|
static struct spdk_iscsi_task *
|
|
spdk_get_scsi_task_from_ttt(struct spdk_iscsi_conn *conn,
|
|
uint32_t transfer_tag)
|
|
{
|
|
struct spdk_iscsi_pdu *pdu;
|
|
struct iscsi_bhs_data_in *datain_bhs;
|
|
struct spdk_iscsi_task *task = NULL;
|
|
|
|
TAILQ_FOREACH(pdu, &conn->snack_pdu_list, tailq) {
|
|
if (pdu->bhs.opcode == ISCSI_OP_SCSI_DATAIN) {
|
|
datain_bhs = (struct iscsi_bhs_data_in *)&pdu->bhs;
|
|
if (from_be32(&datain_bhs->ttt) == transfer_tag) {
|
|
task = pdu->task;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
return task;
|
|
}
|
|
|
|
/* This function returns the spdk_scsi_task by searching the snack list via
|
|
* initiator task tag and the pdu's opcode
|
|
*/
|
|
static struct spdk_iscsi_task *
|
|
spdk_get_scsi_task_from_itt(struct spdk_iscsi_conn *conn,
|
|
uint32_t task_tag, enum iscsi_op opcode)
|
|
{
|
|
struct spdk_iscsi_pdu *pdu;
|
|
struct spdk_iscsi_task *task = NULL;
|
|
|
|
TAILQ_FOREACH(pdu, &conn->snack_pdu_list, tailq) {
|
|
if (pdu->bhs.opcode == opcode &&
|
|
pdu->task != NULL &&
|
|
pdu->task->tag == task_tag) {
|
|
task = pdu->task;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return task;
|
|
}
|
|
|
|
static int
|
|
spdk_iscsi_send_datain(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_task *task, int datain_flag,
|
|
int residual_len, int offset, int DataSN, int len)
|
|
{
|
|
struct spdk_iscsi_pdu *rsp_pdu;
|
|
struct iscsi_bhs_data_in *rsph;
|
|
uint32_t task_tag;
|
|
uint32_t transfer_tag;
|
|
int F_bit, U_bit, O_bit, S_bit;
|
|
struct spdk_iscsi_task *primary;
|
|
|
|
primary = spdk_iscsi_task_get_primary(task);
|
|
|
|
/* DATA PDU */
|
|
rsp_pdu = spdk_get_pdu();
|
|
rsph = (struct iscsi_bhs_data_in *)&rsp_pdu->bhs;
|
|
rsp_pdu->data = task->scsi.iovs[0].iov_base + offset;
|
|
rsp_pdu->data_from_mempool = true;
|
|
|
|
task_tag = task->tag;
|
|
transfer_tag = 0xffffffffU;
|
|
|
|
F_bit = datain_flag & ISCSI_FLAG_FINAL;
|
|
O_bit = datain_flag & ISCSI_DATAIN_OVERFLOW;
|
|
U_bit = datain_flag & ISCSI_DATAIN_UNDERFLOW;
|
|
S_bit = datain_flag & ISCSI_DATAIN_STATUS;
|
|
|
|
/*
|
|
* we need to hold onto this task/cmd because until the
|
|
* PDU has been written out
|
|
*/
|
|
rsp_pdu->task = task;
|
|
task->scsi.ref++;
|
|
|
|
rsph->opcode = ISCSI_OP_SCSI_DATAIN;
|
|
|
|
if (F_bit)
|
|
rsph->flags |= ISCSI_FLAG_FINAL;
|
|
|
|
/* we leave the A_bit clear */
|
|
|
|
if (F_bit && S_bit) {
|
|
if (O_bit)
|
|
rsph->flags |= ISCSI_DATAIN_OVERFLOW;
|
|
|
|
if (U_bit)
|
|
rsph->flags |= ISCSI_DATAIN_UNDERFLOW;
|
|
}
|
|
|
|
if (S_bit) {
|
|
rsph->flags |= ISCSI_DATAIN_STATUS;
|
|
rsph->status = task->scsi.status;
|
|
}
|
|
|
|
DSET24(rsph->data_segment_len, len);
|
|
|
|
to_be32(&rsph->itt, task_tag);
|
|
to_be32(&rsph->ttt, transfer_tag);
|
|
|
|
if (S_bit) {
|
|
to_be32(&rsph->stat_sn, conn->StatSN);
|
|
conn->StatSN++;
|
|
}
|
|
|
|
if (F_bit && S_bit && !spdk_iscsi_task_is_immediate(primary))
|
|
conn->sess->MaxCmdSN++;
|
|
|
|
to_be32(&rsph->exp_cmd_sn, conn->sess->ExpCmdSN);
|
|
to_be32(&rsph->max_cmd_sn, conn->sess->MaxCmdSN);
|
|
|
|
to_be32(&rsph->data_sn, DataSN);
|
|
|
|
if (conn->sess->ErrorRecoveryLevel >= 1)
|
|
primary->datain_datasn = DataSN;
|
|
DataSN++;
|
|
|
|
if (task->scsi.parent)
|
|
offset += primary->scsi.data_transferred;
|
|
to_be32(&rsph->buffer_offset, (uint32_t)offset);
|
|
|
|
if (F_bit && S_bit)
|
|
to_be32(&rsph->res_cnt, residual_len);
|
|
|
|
spdk_iscsi_write_pdu(conn, rsp_pdu);
|
|
|
|
return DataSN;
|
|
}
|
|
|
|
static int
|
|
spdk_iscsi_transfer_in(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_task *task)
|
|
{
|
|
uint32_t DataSN;
|
|
int transfer_len;
|
|
int data_len;
|
|
int segment_len;
|
|
int offset;
|
|
int residual_len = 0;
|
|
int sent_status;
|
|
int len;
|
|
int datain_flag = 0;
|
|
int datain_seq_cnt;
|
|
int i;
|
|
int sequence_end;
|
|
struct spdk_iscsi_task *primary;
|
|
|
|
primary = spdk_iscsi_task_get_primary(task);
|
|
segment_len = conn->MaxRecvDataSegmentLength;
|
|
data_len = task->scsi.data_transferred;
|
|
transfer_len = task->scsi.length;
|
|
|
|
if (task->scsi.status != SPDK_SCSI_STATUS_GOOD) {
|
|
if (task != primary) {
|
|
conn->data_in_cnt--;
|
|
} else {
|
|
/* handle the case that it is a primary task which has subtasks */
|
|
if (primary->scsi.transfer_len != task->scsi.length) {
|
|
conn->data_in_cnt--;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
if (data_len < transfer_len) {
|
|
/* underflow */
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "Underflow %u/%u\n",
|
|
data_len, transfer_len);
|
|
residual_len = transfer_len - data_len;
|
|
transfer_len = data_len;
|
|
datain_flag |= ISCSI_DATAIN_UNDERFLOW;
|
|
} else if (data_len > transfer_len) {
|
|
/* overflow */
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "Overflow %u/%u\n",
|
|
data_len, transfer_len);
|
|
residual_len = data_len - transfer_len;
|
|
datain_flag |= ISCSI_DATAIN_OVERFLOW;
|
|
} else {
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "Transfer %u\n",
|
|
transfer_len);
|
|
residual_len = 0;
|
|
}
|
|
|
|
DataSN = primary->datain_datasn;
|
|
sent_status = 0;
|
|
|
|
/* calculate the number of sequences for all data-in pdus */
|
|
datain_seq_cnt = 1 + ((transfer_len - 1) / (int)conn->sess->MaxBurstLength);
|
|
for (i = 0; i < datain_seq_cnt; i++) {
|
|
offset = i * conn->sess->MaxBurstLength;
|
|
sequence_end = DMIN32(((i + 1) * conn->sess->MaxBurstLength),
|
|
transfer_len);
|
|
datain_flag &= ~ISCSI_FLAG_FINAL;
|
|
datain_flag &= ~ISCSI_DATAIN_STATUS;
|
|
|
|
/* send data splitted by segment_len */
|
|
for (; offset < sequence_end; offset += segment_len) {
|
|
len = DMIN32(segment_len, (sequence_end - offset));
|
|
|
|
if (offset + len == sequence_end) {
|
|
/* last PDU in a sequence */
|
|
datain_flag |= ISCSI_FLAG_FINAL;
|
|
datain_flag &= ~ISCSI_DATAIN_STATUS;
|
|
if (task->scsi.sense_data_len == 0) {
|
|
switch (task->scsi.status) {
|
|
case SPDK_SCSI_STATUS_GOOD:
|
|
case SPDK_SCSI_STATUS_CONDITION_MET:
|
|
case SPDK_SCSI_STATUS_INTERMEDIATE:
|
|
case SPDK_SCSI_STATUS_INTERMEDIATE_CONDITION_MET:
|
|
/* The last pdu in all data-in pdus */
|
|
if ((offset + len) == transfer_len &&
|
|
(primary->bytes_completed ==
|
|
primary->scsi.transfer_len)) {
|
|
datain_flag |= ISCSI_DATAIN_STATUS;
|
|
sent_status = 1;
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
datain_flag &= ~ISCSI_FLAG_FINAL;
|
|
datain_flag &= ~ISCSI_DATAIN_STATUS;
|
|
}
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG,
|
|
"Transfer=%d, Offset=%d, Len=%d\n",
|
|
sequence_end, offset, len);
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI,
|
|
"StatSN=%u, DataSN=%u, Offset=%u, Len=%d\n",
|
|
conn->StatSN, DataSN, offset, len);
|
|
|
|
DataSN = spdk_iscsi_send_datain(conn, task, datain_flag,
|
|
residual_len, offset,
|
|
DataSN, len);
|
|
}
|
|
}
|
|
|
|
if (task != primary)
|
|
primary->scsi.data_transferred += task->scsi.data_transferred;
|
|
primary->datain_datasn = DataSN;
|
|
|
|
if (sent_status)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function compare the input pdu's bhs with the pdu's bhs associated by
|
|
* active_r2t_tasks and queued_r2t_tasks in a connection
|
|
*/
|
|
static bool
|
|
spdk_iscsi_compare_pdu_bhs_within_existed_r2t_tasks(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
struct spdk_iscsi_task *task;
|
|
|
|
TAILQ_FOREACH(task, &conn->active_r2t_tasks, link) {
|
|
if (!memcmp(&pdu->bhs, spdk_iscsi_task_get_bhs(task), ISCSI_BHS_LEN))
|
|
return true;
|
|
}
|
|
|
|
TAILQ_FOREACH(task, &conn->queued_r2t_tasks, link) {
|
|
if (!memcmp(&pdu->bhs, spdk_iscsi_task_get_bhs(task), ISCSI_BHS_LEN))
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static void spdk_iscsi_queue_task(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_task *task)
|
|
{
|
|
spdk_trace_record(TRACE_ISCSI_TASK_QUEUE, conn->id, task->scsi.length,
|
|
(uintptr_t)task, (uintptr_t)task->pdu);
|
|
spdk_scsi_dev_queue_task(conn->dev, &task->scsi);
|
|
}
|
|
|
|
static void spdk_iscsi_queue_mgmt_task(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_task *task,
|
|
enum spdk_scsi_task_func func)
|
|
{
|
|
spdk_scsi_dev_queue_mgmt_task(conn->dev, &task->scsi, func);
|
|
}
|
|
|
|
int spdk_iscsi_conn_handle_queued_tasks(struct spdk_iscsi_conn *conn)
|
|
{
|
|
struct spdk_iscsi_task *task;
|
|
|
|
while (!TAILQ_EMPTY(&conn->queued_datain_tasks) &&
|
|
conn->data_in_cnt < MAX_LARGE_DATAIN_PER_CONNECTION) {
|
|
task = TAILQ_FIRST(&conn->queued_datain_tasks);
|
|
assert(task->current_datain_offset <= task->scsi.transfer_len);
|
|
|
|
if (task->current_datain_offset == 0) {
|
|
task->current_datain_offset = task->scsi.length;
|
|
conn->data_in_cnt++;
|
|
spdk_iscsi_queue_task(conn, task);
|
|
continue;
|
|
}
|
|
if (task->current_datain_offset < task->scsi.transfer_len) {
|
|
struct spdk_iscsi_task *subtask;
|
|
uint32_t remaining_size = 0;
|
|
|
|
remaining_size = task->scsi.transfer_len - task->current_datain_offset;
|
|
subtask = spdk_iscsi_task_get(conn, task, spdk_iscsi_task_cpl);
|
|
assert(subtask != NULL);
|
|
subtask->scsi.offset = task->current_datain_offset;
|
|
subtask->scsi.length = DMIN32(SPDK_BDEV_LARGE_BUF_MAX_SIZE, remaining_size);
|
|
spdk_scsi_task_set_data(&subtask->scsi, NULL, 0);
|
|
spdk_iscsi_queue_task(conn, subtask);
|
|
task->current_datain_offset += subtask->scsi.length;
|
|
conn->data_in_cnt++;
|
|
}
|
|
if (task->current_datain_offset == task->scsi.transfer_len) {
|
|
TAILQ_REMOVE(&conn->queued_datain_tasks, task, link);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int spdk_iscsi_op_scsi_read(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_task *task)
|
|
{
|
|
int32_t remaining_size = 0;
|
|
|
|
TAILQ_INIT(&task->subtask_list);
|
|
task->scsi.dxfer_dir = SPDK_SCSI_DIR_FROM_DEV;
|
|
task->scsi.parent = NULL;
|
|
task->scsi.offset = 0;
|
|
task->scsi.length = DMIN32(SPDK_BDEV_LARGE_BUF_MAX_SIZE, task->scsi.transfer_len);
|
|
spdk_scsi_task_set_data(&task->scsi, NULL, 0);
|
|
|
|
remaining_size = task->scsi.transfer_len - task->scsi.length;
|
|
task->current_datain_offset = 0;
|
|
|
|
if (remaining_size == 0) {
|
|
spdk_iscsi_queue_task(conn, task);
|
|
return 0;
|
|
}
|
|
|
|
TAILQ_INSERT_TAIL(&conn->queued_datain_tasks, task, link);
|
|
|
|
return spdk_iscsi_conn_handle_queued_tasks(conn);
|
|
}
|
|
|
|
static int
|
|
spdk_iscsi_op_scsi(struct spdk_iscsi_conn *conn, struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
struct spdk_iscsi_task *task;
|
|
struct spdk_scsi_dev *dev;
|
|
uint8_t *cdb;
|
|
uint64_t lun;
|
|
uint32_t task_tag;
|
|
uint32_t transfer_len;
|
|
int F_bit, R_bit, W_bit;
|
|
int lun_i, rc;
|
|
struct iscsi_bhs_scsi_req *reqh;
|
|
|
|
if (conn->sess->session_type != SESSION_TYPE_NORMAL) {
|
|
SPDK_ERRLOG("ISCSI_OP_SCSI not allowed in discovery and invalid session\n");
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
|
|
reqh = (struct iscsi_bhs_scsi_req *)&pdu->bhs;
|
|
|
|
F_bit = reqh->final_bit;
|
|
R_bit = reqh->read_bit;
|
|
W_bit = reqh->write_bit;
|
|
lun = from_be64(&reqh->lun);
|
|
task_tag = from_be32(&reqh->itt);
|
|
transfer_len = from_be32(&reqh->expected_data_xfer_len);
|
|
cdb = reqh->cdb;
|
|
|
|
SPDK_TRACEDUMP(SPDK_TRACE_DEBUG, "CDB", cdb, 16);
|
|
|
|
task = spdk_iscsi_task_get(conn, NULL, spdk_iscsi_task_cpl);
|
|
if (!task) {
|
|
SPDK_ERRLOG("Unable to acquire task\n");
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
|
|
spdk_iscsi_task_associate_pdu(task, pdu);
|
|
lun_i = spdk_islun2lun(lun);
|
|
dev = conn->dev;
|
|
task->scsi.lun = spdk_scsi_dev_get_lun(dev, lun_i);
|
|
|
|
if ((R_bit != 0) && (W_bit != 0)) {
|
|
SPDK_ERRLOG("Bidirectional CDB is not supported\n");
|
|
spdk_iscsi_task_put(task);
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
|
|
task->scsi.cdb = cdb;
|
|
task->tag = task_tag;
|
|
task->scsi.transfer_len = transfer_len;
|
|
task->scsi.target_port = conn->target_port;
|
|
task->scsi.initiator_port = conn->initiator_port;
|
|
task->scsi.parent = NULL;
|
|
|
|
if (task->scsi.lun == NULL) {
|
|
spdk_scsi_task_process_null_lun(&task->scsi);
|
|
spdk_iscsi_task_cpl(&task->scsi);
|
|
return 0;
|
|
}
|
|
|
|
/* no bi-directional support */
|
|
if (R_bit) {
|
|
return spdk_iscsi_op_scsi_read(conn, task);
|
|
} else if (W_bit) {
|
|
task->scsi.dxfer_dir = SPDK_SCSI_DIR_TO_DEV;
|
|
|
|
if ((conn->sess->ErrorRecoveryLevel >= 1) &&
|
|
(spdk_iscsi_compare_pdu_bhs_within_existed_r2t_tasks(conn, pdu))) {
|
|
spdk_iscsi_task_response(conn, task);
|
|
spdk_iscsi_task_put(task);
|
|
return 0;
|
|
}
|
|
|
|
if (pdu->data_segment_len > transfer_len) {
|
|
SPDK_ERRLOG("data segment len > task transfer len\n");
|
|
spdk_iscsi_task_put(task);
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
|
|
/* check the ImmediateData and also pdu->data_segment_len */
|
|
if ((!conn->sess->ImmediateData && (pdu->data_segment_len > 0)) ||
|
|
(pdu->data_segment_len > conn->sess->FirstBurstLength)) {
|
|
spdk_iscsi_task_put(task);
|
|
rc = spdk_iscsi_reject(conn, pdu,
|
|
ISCSI_REASON_PROTOCOL_ERROR);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_reject() failed\n");
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
if (F_bit && pdu->data_segment_len < transfer_len) {
|
|
/* needs R2T */
|
|
rc = spdk_add_transfer_task(conn, task);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("add_transfer_task() failed\n");
|
|
spdk_iscsi_task_put(task);
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
|
|
/* Non-immediate writes */
|
|
if (pdu->data_segment_len == 0)
|
|
return 0;
|
|
else {
|
|
/* we are doing the first partial write task */
|
|
task->scsi.ref++;
|
|
spdk_scsi_task_set_data(&task->scsi, pdu->data, pdu->data_segment_len);
|
|
task->scsi.length = pdu->data_segment_len;
|
|
}
|
|
}
|
|
|
|
if (pdu->data_segment_len == transfer_len) {
|
|
/* we are doing small writes with no R2T */
|
|
spdk_scsi_task_set_data(&task->scsi, pdu->data, transfer_len);
|
|
task->scsi.length = transfer_len;
|
|
}
|
|
} else {
|
|
/* neither R nor W bit set */
|
|
task->scsi.dxfer_dir = SPDK_SCSI_DIR_NONE;
|
|
if (transfer_len > 0) {
|
|
spdk_iscsi_task_put(task);
|
|
SPDK_ERRLOG("Reject scsi cmd with EDTL > 0 but (R | W) == 0\n");
|
|
return spdk_iscsi_reject(conn, pdu, ISCSI_REASON_INVALID_PDU_FIELD);
|
|
}
|
|
}
|
|
|
|
spdk_iscsi_queue_task(conn, task);
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
spdk_iscsi_task_mgmt_response(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_task *task)
|
|
{
|
|
struct spdk_iscsi_pdu *rsp_pdu;
|
|
struct iscsi_bhs_task_req *reqh;
|
|
struct iscsi_bhs_task_resp *rsph;
|
|
|
|
if (task->pdu == NULL) {
|
|
/*
|
|
* This was an internally generated task management command,
|
|
* usually from LUN cleanup when a connection closes.
|
|
*/
|
|
return;
|
|
}
|
|
|
|
reqh = (struct iscsi_bhs_task_req *)&task->pdu->bhs;
|
|
/* response PDU */
|
|
rsp_pdu = spdk_get_pdu();
|
|
rsph = (struct iscsi_bhs_task_resp *)&rsp_pdu->bhs;
|
|
rsph->opcode = ISCSI_OP_TASK_RSP;
|
|
rsph->flags |= 0x80; /* bit 0 default to 1 */
|
|
switch (task->scsi.response) {
|
|
case SPDK_SCSI_TASK_MGMT_RESP_COMPLETE:
|
|
rsph->response = ISCSI_TASK_FUNC_RESP_COMPLETE;
|
|
break;
|
|
case SPDK_SCSI_TASK_MGMT_RESP_SUCCESS:
|
|
rsph->response = ISCSI_TASK_FUNC_RESP_COMPLETE;
|
|
break;
|
|
case SPDK_SCSI_TASK_MGMT_RESP_REJECT:
|
|
rsph->response = ISCSI_TASK_FUNC_REJECTED;
|
|
break;
|
|
case SPDK_SCSI_TASK_MGMT_RESP_INVALID_LUN:
|
|
rsph->response = ISCSI_TASK_FUNC_RESP_LUN_NOT_EXIST;
|
|
break;
|
|
case SPDK_SCSI_TASK_MGMT_RESP_TARGET_FAILURE:
|
|
rsph->response = ISCSI_TASK_FUNC_REJECTED;
|
|
break;
|
|
case SPDK_SCSI_TASK_MGMT_RESP_REJECT_FUNC_NOT_SUPPORTED:
|
|
rsph->response = ISCSI_TASK_FUNC_RESP_FUNC_NOT_SUPPORTED;
|
|
break;
|
|
}
|
|
rsph->itt = reqh->itt;
|
|
|
|
to_be32(&rsph->stat_sn, conn->StatSN);
|
|
conn->StatSN++;
|
|
|
|
if (reqh->immediate == 0) {
|
|
conn->sess->MaxCmdSN++;
|
|
}
|
|
|
|
to_be32(&rsph->exp_cmd_sn, conn->sess->ExpCmdSN);
|
|
to_be32(&rsph->max_cmd_sn, conn->sess->MaxCmdSN);
|
|
|
|
spdk_iscsi_write_pdu(conn, rsp_pdu);
|
|
}
|
|
|
|
|
|
void spdk_iscsi_task_response(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_task *task)
|
|
{
|
|
struct spdk_iscsi_pdu *rsp_pdu;
|
|
struct iscsi_bhs_scsi_resp *rsph;
|
|
uint32_t task_tag;
|
|
uint32_t transfer_len;
|
|
size_t residual_len;
|
|
size_t data_len;
|
|
int o_bit, u_bit, O_bit, U_bit;
|
|
int bidi_residual_len;
|
|
int rc;
|
|
struct spdk_iscsi_task *primary;
|
|
|
|
primary = spdk_iscsi_task_get_primary(task);
|
|
|
|
transfer_len = primary->scsi.transfer_len;
|
|
task_tag = task->tag;
|
|
|
|
/* transfer data from logical unit */
|
|
/* (direction is view of initiator side) */
|
|
if (spdk_iscsi_task_is_read(primary)) {
|
|
rc = spdk_iscsi_transfer_in(conn, task);
|
|
if (rc > 0) {
|
|
/* sent status by last DATAIN PDU */
|
|
return;
|
|
}
|
|
|
|
if (primary->bytes_completed != primary->scsi.transfer_len)
|
|
return;
|
|
}
|
|
|
|
o_bit = u_bit = O_bit = U_bit = 0;
|
|
bidi_residual_len = residual_len = 0;
|
|
data_len = primary->scsi.data_transferred;
|
|
|
|
if ((transfer_len != 0) &&
|
|
(task->scsi.status == SPDK_SCSI_STATUS_GOOD)) {
|
|
if (data_len < transfer_len) {
|
|
/* underflow */
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "Underflow %zu/%u\n",
|
|
data_len, transfer_len);
|
|
residual_len = transfer_len - data_len;
|
|
U_bit = 1;
|
|
} else if (data_len > transfer_len) {
|
|
/* overflow */
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "Overflow %zu/%u\n",
|
|
data_len, transfer_len);
|
|
residual_len = data_len - transfer_len;
|
|
O_bit = 1;
|
|
} else {
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "Transfer %u\n",
|
|
transfer_len);
|
|
}
|
|
}
|
|
|
|
/* response PDU */
|
|
rsp_pdu = spdk_get_pdu();
|
|
rsph = (struct iscsi_bhs_scsi_resp *)&rsp_pdu->bhs;
|
|
assert(task->scsi.sense_data_len <= sizeof(rsp_pdu->sense.data));
|
|
memcpy(rsp_pdu->sense.data, task->scsi.sense_data, task->scsi.sense_data_len);
|
|
to_be16(&rsp_pdu->sense.length, task->scsi.sense_data_len);
|
|
rsp_pdu->data = (uint8_t *)&rsp_pdu->sense;
|
|
rsp_pdu->data_from_mempool = true;
|
|
|
|
/*
|
|
* we need to hold onto this task/cmd because until the
|
|
* PDU has been written out
|
|
*/
|
|
rsp_pdu->task = task;
|
|
task->scsi.ref++;
|
|
|
|
rsph->opcode = ISCSI_OP_SCSI_RSP;
|
|
rsph->flags |= 0x80; /* bit 0 is default to 1 */
|
|
|
|
if (o_bit)
|
|
rsph->flags |= ISCSI_SCSI_BIDI_OVERFLOW;
|
|
|
|
if (u_bit)
|
|
rsph->flags |= ISCSI_SCSI_BIDI_UNDERFLOW;
|
|
|
|
if (O_bit)
|
|
rsph->flags |= ISCSI_SCSI_OVERFLOW;
|
|
|
|
if (U_bit)
|
|
rsph->flags |= ISCSI_SCSI_UNDERFLOW;
|
|
|
|
rsph->status = task->scsi.status;
|
|
if (task->scsi.sense_data_len) {
|
|
/* SenseLength (2 bytes) + SenseData */
|
|
DSET24(rsph->data_segment_len, 2 + task->scsi.sense_data_len);
|
|
}
|
|
to_be32(&rsph->itt, task_tag);
|
|
|
|
to_be32(&rsph->stat_sn, conn->StatSN);
|
|
conn->StatSN++;
|
|
|
|
if (!spdk_iscsi_task_is_immediate(primary))
|
|
conn->sess->MaxCmdSN++;
|
|
|
|
to_be32(&rsph->exp_cmd_sn, conn->sess->ExpCmdSN);
|
|
to_be32(&rsph->max_cmd_sn, conn->sess->MaxCmdSN);
|
|
|
|
to_be32(&rsph->bi_read_res_cnt, bidi_residual_len);
|
|
to_be32(&rsph->res_cnt, residual_len);
|
|
|
|
spdk_iscsi_write_pdu(conn, rsp_pdu);
|
|
}
|
|
|
|
static struct spdk_iscsi_task *
|
|
spdk_get_transfer_task(struct spdk_iscsi_conn *conn, uint32_t transfer_tag)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < conn->pending_r2t; i++) {
|
|
if (conn->outstanding_r2t_tasks[i]->ttt == transfer_tag) {
|
|
return (conn->outstanding_r2t_tasks[i]);
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int
|
|
spdk_iscsi_op_task(struct spdk_iscsi_conn *conn, struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
struct iscsi_bhs_task_req *reqh;
|
|
uint64_t lun;
|
|
uint32_t task_tag;
|
|
uint32_t ref_task_tag;
|
|
uint8_t function;
|
|
int lun_i;
|
|
struct spdk_iscsi_task *task;
|
|
struct spdk_scsi_dev *dev;
|
|
|
|
if (conn->sess->session_type != SESSION_TYPE_NORMAL) {
|
|
SPDK_ERRLOG("ISCSI_OP_TASK not allowed in discovery and invalid session\n");
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
|
|
reqh = (struct iscsi_bhs_task_req *)&pdu->bhs;
|
|
function = reqh->flags & ISCSI_TASK_FUNCTION_MASK;
|
|
lun = from_be64(&reqh->lun);
|
|
task_tag = from_be32(&reqh->itt);
|
|
ref_task_tag = from_be32(&reqh->ref_task_tag);
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG,
|
|
"I=%d, func=%d, ITT=%x, ref TT=%x, LUN=0x%16.16"PRIx64"\n",
|
|
reqh->immediate, function, task_tag, ref_task_tag, lun);
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI,
|
|
"StatSN=%u, ExpCmdSN=%u, MaxCmdSN=%u\n",
|
|
conn->StatSN, conn->sess->ExpCmdSN,
|
|
conn->sess->MaxCmdSN);
|
|
|
|
lun_i = spdk_islun2lun(lun);
|
|
dev = conn->dev;
|
|
|
|
task = spdk_iscsi_task_get(conn, NULL, spdk_iscsi_task_mgmt_cpl);
|
|
if (!task) {
|
|
SPDK_ERRLOG("Unable to acquire task\n");
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
|
|
spdk_iscsi_task_associate_pdu(task, pdu);
|
|
task->scsi.target_port = conn->target_port;
|
|
task->scsi.initiator_port = conn->initiator_port;
|
|
task->tag = task_tag;
|
|
task->scsi.lun = spdk_scsi_dev_get_lun(dev, lun_i);
|
|
|
|
switch (function) {
|
|
/* abort task identified by Referenced Task Tag field */
|
|
case ISCSI_TASK_FUNC_ABORT_TASK:
|
|
SPDK_NOTICELOG("ABORT_TASK\n");
|
|
|
|
task->scsi.abort_id = ref_task_tag;
|
|
|
|
spdk_iscsi_queue_mgmt_task(conn, task, SPDK_SCSI_TASK_FUNC_ABORT_TASK);
|
|
spdk_del_transfer_task(conn, ref_task_tag);
|
|
|
|
return SPDK_SUCCESS;
|
|
|
|
/* abort all tasks issued via this session on the LUN */
|
|
case ISCSI_TASK_FUNC_ABORT_TASK_SET:
|
|
SPDK_NOTICELOG("ABORT_TASK_SET\n");
|
|
|
|
spdk_iscsi_queue_mgmt_task(conn, task, SPDK_SCSI_TASK_FUNC_ABORT_TASK_SET);
|
|
spdk_clear_all_transfer_task(conn, task->scsi.lun);
|
|
|
|
return SPDK_SUCCESS;
|
|
|
|
case ISCSI_TASK_FUNC_CLEAR_TASK_SET:
|
|
task->scsi.response = SPDK_SCSI_TASK_MGMT_RESP_REJECT_FUNC_NOT_SUPPORTED;
|
|
SPDK_NOTICELOG("CLEAR_TASK_SET (Unsupported)\n");
|
|
break;
|
|
|
|
case ISCSI_TASK_FUNC_CLEAR_ACA:
|
|
task->scsi.response = SPDK_SCSI_TASK_MGMT_RESP_REJECT_FUNC_NOT_SUPPORTED;
|
|
SPDK_NOTICELOG("CLEAR_ACA (Unsupported)\n");
|
|
break;
|
|
|
|
case ISCSI_TASK_FUNC_LOGICAL_UNIT_RESET:
|
|
SPDK_NOTICELOG("LOGICAL_UNIT_RESET\n");
|
|
|
|
spdk_iscsi_queue_mgmt_task(conn, task, SPDK_SCSI_TASK_FUNC_LUN_RESET);
|
|
spdk_clear_all_transfer_task(conn, task->scsi.lun);
|
|
return SPDK_SUCCESS;
|
|
|
|
case ISCSI_TASK_FUNC_TARGET_WARM_RESET:
|
|
SPDK_NOTICELOG("TARGET_WARM_RESET (Unsupported)\n");
|
|
|
|
#if 0
|
|
spdk_iscsi_drop_conns(conn, conn->initiator_name, 1 /* drop all */);
|
|
rc = spdk_iscsi_tgt_node_reset(conn->sess->target, lun);
|
|
if (rc < 0)
|
|
SPDK_ERRLOG("tgt_node reset failed\n");
|
|
#else
|
|
task->scsi.response = SPDK_SCSI_TASK_MGMT_RESP_REJECT_FUNC_NOT_SUPPORTED;
|
|
#endif
|
|
break;
|
|
|
|
case ISCSI_TASK_FUNC_TARGET_COLD_RESET:
|
|
SPDK_NOTICELOG("TARGET_COLD_RESET\n");
|
|
|
|
#if 0
|
|
spdk_iscsi_drop_conns(conn, conn->initiator_name, 1 /* drop all */);
|
|
|
|
rc = spdk_iscsi_tgt_node_reset(conn->sess->target, lun);
|
|
if (rc < 0)
|
|
SPDK_ERRLOG("tgt_node reset failed\n");
|
|
|
|
conn->state = ISCSI_CONN_STATE_EXITING;
|
|
#else
|
|
task->scsi.response = SPDK_SCSI_TASK_MGMT_RESP_REJECT_FUNC_NOT_SUPPORTED;
|
|
#endif
|
|
break;
|
|
|
|
case ISCSI_TASK_FUNC_TASK_REASSIGN:
|
|
SPDK_NOTICELOG("TASK_REASSIGN (Unsupported)\n");
|
|
task->scsi.response = SPDK_SCSI_TASK_MGMT_RESP_REJECT_FUNC_NOT_SUPPORTED;
|
|
break;
|
|
|
|
default:
|
|
SPDK_ERRLOG("unsupported function %d\n", function);
|
|
task->scsi.response = SPDK_SCSI_TASK_MGMT_RESP_REJECT;
|
|
break;
|
|
}
|
|
|
|
spdk_iscsi_task_mgmt_response(conn, task);
|
|
spdk_iscsi_task_put(task);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
spdk_iscsi_op_nopout(struct spdk_iscsi_conn *conn, struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
struct spdk_iscsi_pdu *rsp_pdu;
|
|
struct iscsi_bhs_nop_out *reqh;
|
|
struct iscsi_bhs_nop_in *rsph;
|
|
uint8_t *data;
|
|
uint64_t lun;
|
|
uint32_t task_tag;
|
|
uint32_t transfer_tag;
|
|
uint32_t CmdSN;
|
|
int I_bit;
|
|
int data_len;
|
|
|
|
if (conn->sess->session_type == SESSION_TYPE_DISCOVERY) {
|
|
SPDK_ERRLOG("ISCSI_OP_NOPOUT not allowed in discovery session\n");
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
|
|
reqh = (struct iscsi_bhs_nop_out *)&pdu->bhs;
|
|
I_bit = reqh->immediate;
|
|
|
|
data_len = DGET24(reqh->data_segment_len);
|
|
if (data_len > conn->MaxRecvDataSegmentLength) {
|
|
data_len = conn->MaxRecvDataSegmentLength;
|
|
}
|
|
|
|
lun = from_be64(&reqh->lun);
|
|
task_tag = from_be32(&reqh->itt);
|
|
transfer_tag = from_be32(&reqh->ttt);
|
|
CmdSN = from_be32(&reqh->cmd_sn);
|
|
pdu->cmd_sn = CmdSN;
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "I=%d, ITT=%x, TTT=%x\n",
|
|
I_bit, task_tag, transfer_tag);
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI,
|
|
"CmdSN=%u, StatSN=%u, ExpCmdSN=%u, MaxCmdSN=%u\n",
|
|
CmdSN, conn->StatSN, conn->sess->ExpCmdSN,
|
|
conn->sess->MaxCmdSN);
|
|
|
|
if (transfer_tag != 0xFFFFFFFF && transfer_tag != (uint32_t)conn->id) {
|
|
SPDK_ERRLOG("invalid transfer tag 0x%x\n", transfer_tag);
|
|
/*
|
|
* Technically we should probably fail the connection here, but for now
|
|
* just print the error message and continue.
|
|
*/
|
|
}
|
|
|
|
/*
|
|
* We don't actually check to see if this is a response to the NOP-In
|
|
* that we sent. Our goal is to just verify that the initiator is
|
|
* alive and responding to commands, not to verify that it tags
|
|
* NOP-Outs correctly
|
|
*/
|
|
conn->nop_outstanding = false;
|
|
|
|
if (task_tag == 0xffffffffU) {
|
|
if (I_bit == 1) {
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG,
|
|
"got NOPOUT ITT=0xffffffff\n");
|
|
return SPDK_SUCCESS;
|
|
} else {
|
|
SPDK_ERRLOG("got NOPOUT ITT=0xffffffff, I=0\n");
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
}
|
|
|
|
data = malloc(data_len);
|
|
if (!data) {
|
|
perror("could not allocate ping buffer");
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
memset(data, 0, data_len);
|
|
|
|
/* response of NOPOUT */
|
|
if (data_len > 0) {
|
|
/* copy ping data */
|
|
memcpy(data, pdu->data, data_len);
|
|
}
|
|
|
|
transfer_tag = 0xffffffffU;
|
|
|
|
/* response PDU */
|
|
rsp_pdu = spdk_get_pdu();
|
|
rsph = (struct iscsi_bhs_nop_in *)&rsp_pdu->bhs;
|
|
rsp_pdu->data = data;
|
|
rsph->opcode = ISCSI_OP_NOPIN;
|
|
rsph->flags |= 0x80; /* bit 0 default to 1 */
|
|
DSET24(rsph->data_segment_len, data_len);
|
|
to_be64(&rsph->lun, lun);
|
|
to_be32(&rsph->itt, task_tag);
|
|
to_be32(&rsph->ttt, transfer_tag);
|
|
|
|
to_be32(&rsph->stat_sn, conn->StatSN);
|
|
conn->StatSN++;
|
|
|
|
if (I_bit == 0) {
|
|
conn->sess->MaxCmdSN++;
|
|
}
|
|
|
|
to_be32(&rsph->exp_cmd_sn, conn->sess->ExpCmdSN);
|
|
to_be32(&rsph->max_cmd_sn, conn->sess->MaxCmdSN);
|
|
|
|
spdk_iscsi_write_pdu(conn, rsp_pdu);
|
|
conn->last_nopin = spdk_get_ticks();
|
|
|
|
return SPDK_SUCCESS;
|
|
}
|
|
|
|
static int
|
|
spdk_add_transfer_task(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_task *task)
|
|
{
|
|
uint32_t transfer_len;
|
|
size_t max_burst_len;
|
|
size_t segment_len;
|
|
size_t data_len;
|
|
int len;
|
|
int idx;
|
|
int rc;
|
|
int data_out_req;
|
|
|
|
transfer_len = task->scsi.transfer_len;
|
|
data_len = spdk_iscsi_task_get_pdu(task)->data_segment_len;
|
|
max_burst_len = conn->sess->MaxBurstLength;
|
|
segment_len = g_spdk_iscsi.MaxRecvDataSegmentLength;
|
|
data_out_req = 1 + (transfer_len - data_len - 1) / segment_len;
|
|
task->data_out_cnt = data_out_req;
|
|
|
|
/*
|
|
* If we already have too many tasks using R2T, then queue this task
|
|
* and start sending R2T for it after some of the tasks using R2T/data
|
|
* out buffers complete.
|
|
*/
|
|
if (conn->pending_r2t >= DEFAULT_MAXR2T) {
|
|
TAILQ_INSERT_TAIL(&conn->queued_r2t_tasks, task, link);
|
|
return SPDK_SUCCESS;
|
|
}
|
|
|
|
conn->data_out_cnt += data_out_req;
|
|
idx = conn->pending_r2t++;
|
|
|
|
conn->outstanding_r2t_tasks[idx] = task;
|
|
task->next_expected_r2t_offset = data_len;
|
|
task->current_r2t_length = 0;
|
|
task->R2TSN = 0;
|
|
task->ttt = ++conn->ttt;
|
|
|
|
while (data_len != transfer_len) {
|
|
len = DMIN32(max_burst_len, (transfer_len - data_len));
|
|
rc = spdk_iscsi_send_r2t(conn, task, data_len, len,
|
|
task->ttt, &task->R2TSN);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_send_r2t() failed\n");
|
|
return rc;
|
|
}
|
|
data_len += len;
|
|
task->next_r2t_offset = data_len;
|
|
task->outstanding_r2t++;
|
|
if (conn->sess->MaxOutstandingR2T == task->outstanding_r2t)
|
|
break;
|
|
}
|
|
|
|
TAILQ_INSERT_TAIL(&conn->active_r2t_tasks, task, link);
|
|
return SPDK_SUCCESS;
|
|
}
|
|
|
|
void spdk_del_transfer_task(struct spdk_iscsi_conn *conn, uint32_t task_tag)
|
|
{
|
|
struct spdk_iscsi_task *task;
|
|
int found = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < conn->pending_r2t; i++) {
|
|
if (conn->outstanding_r2t_tasks[i]->tag == task_tag) {
|
|
task = conn->outstanding_r2t_tasks[i];
|
|
conn->outstanding_r2t_tasks[i] = NULL;
|
|
conn->data_out_cnt -= task->data_out_cnt;
|
|
found = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (found) {
|
|
for (; i < conn->pending_r2t - 1; i++)
|
|
conn->outstanding_r2t_tasks[i] = conn->outstanding_r2t_tasks[i + 1];
|
|
|
|
conn->pending_r2t--;
|
|
conn->outstanding_r2t_tasks[conn->pending_r2t] = NULL;
|
|
}
|
|
|
|
/*
|
|
* A large write was just completed, so if there are additional large
|
|
* writes queued for R2Ts, start them now. But first check to make
|
|
* sure each of the tasks will fit without the connection's allotment
|
|
* for total R2T tasks.
|
|
*/
|
|
while (!TAILQ_EMPTY(&conn->queued_r2t_tasks)) {
|
|
task = TAILQ_FIRST(&conn->queued_r2t_tasks);
|
|
if (conn->pending_r2t < DEFAULT_MAXR2T) {
|
|
TAILQ_REMOVE(&conn->queued_r2t_tasks, task, link);
|
|
spdk_add_transfer_task(conn, task);
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
void spdk_del_connection_queued_task(void *tailq, struct spdk_scsi_lun *lun)
|
|
{
|
|
struct spdk_iscsi_task *task, *task_tmp;
|
|
/*
|
|
* Temporary used to index spdk_scsi_task related
|
|
* queues of the connection.
|
|
*/
|
|
TAILQ_HEAD(queued_tasks, spdk_iscsi_task) *head;
|
|
head = (struct queued_tasks *)tailq;
|
|
|
|
TAILQ_FOREACH_SAFE(task, head, link, task_tmp) {
|
|
if (lun == NULL || lun == task->scsi.lun) {
|
|
TAILQ_REMOVE(head, task, link);
|
|
spdk_iscsi_task_put(task);
|
|
}
|
|
}
|
|
}
|
|
|
|
void spdk_clear_all_transfer_task(struct spdk_iscsi_conn *conn,
|
|
struct spdk_scsi_lun *lun)
|
|
{
|
|
int i, j, pending_r2t;
|
|
struct spdk_iscsi_task *task;
|
|
|
|
pending_r2t = conn->pending_r2t;
|
|
for (i = 0; i < pending_r2t; i++) {
|
|
task = conn->outstanding_r2t_tasks[i];
|
|
if (lun == NULL || lun == task->scsi.lun) {
|
|
conn->outstanding_r2t_tasks[i] = NULL;
|
|
task->outstanding_r2t = 0;
|
|
task->next_r2t_offset = 0;
|
|
task->next_expected_r2t_offset = 0;
|
|
conn->data_out_cnt -= task->data_out_cnt;
|
|
conn->pending_r2t--;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < pending_r2t; i++) {
|
|
if (conn->outstanding_r2t_tasks[i] != NULL)
|
|
continue;
|
|
for (j = i + 1; j < pending_r2t; j++) {
|
|
if (conn->outstanding_r2t_tasks[j] != NULL) {
|
|
conn->outstanding_r2t_tasks[i] = conn->outstanding_r2t_tasks[j];
|
|
conn->outstanding_r2t_tasks[j] = NULL;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
spdk_del_connection_queued_task(&conn->active_r2t_tasks, lun);
|
|
spdk_del_connection_queued_task(&conn->queued_r2t_tasks, lun);
|
|
}
|
|
|
|
/* This function is used to handle the r2t snack */
|
|
static int
|
|
spdk_iscsi_handle_r2t_snack(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_task *task,
|
|
struct spdk_iscsi_pdu *pdu, uint32_t beg_run,
|
|
uint32_t run_length, int32_t task_tag)
|
|
{
|
|
int32_t last_r2tsn;
|
|
int i;
|
|
|
|
if (beg_run < task->acked_r2tsn) {
|
|
SPDK_ERRLOG("ITT: 0x%08x, R2T SNACK requests retransmission of"
|
|
"R2TSN: from 0x%08x to 0x%08x. But it has already"
|
|
"ack to R2TSN:0x%08x, protocol error.\n",
|
|
task_tag, beg_run, (beg_run + run_length),
|
|
(task->acked_r2tsn - 1));
|
|
return spdk_iscsi_reject(conn, pdu, ISCSI_REASON_PROTOCOL_ERROR);
|
|
}
|
|
|
|
if (run_length) {
|
|
if ((beg_run + run_length) > task->R2TSN) {
|
|
SPDK_ERRLOG("ITT: 0x%08x, received R2T SNACK with"
|
|
"BegRun: 0x%08x, RunLength: 0x%08x, exceeds"
|
|
"current R2TSN: 0x%08x, protocol error.\n",
|
|
task_tag, beg_run, run_length,
|
|
task->R2TSN);
|
|
|
|
return spdk_iscsi_reject(conn, pdu,
|
|
ISCSI_REASON_INVALID_PDU_FIELD);
|
|
}
|
|
last_r2tsn = (beg_run + run_length);
|
|
} else
|
|
last_r2tsn = task->R2TSN;
|
|
|
|
for (i = beg_run; i < last_r2tsn; i++)
|
|
if (spdk_iscsi_send_r2t_recovery(conn, task, i, false) < 0)
|
|
SPDK_ERRLOG("The r2t_sn=%d of r2t_task=%p is "
|
|
"not sent\n", i, task);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function is used to recover the data in packet */
|
|
static int
|
|
spdk_iscsi_handle_recovery_datain(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_task *task,
|
|
struct spdk_iscsi_pdu *pdu, uint32_t beg_run,
|
|
uint32_t run_length, uint32_t task_tag)
|
|
{
|
|
struct spdk_iscsi_pdu *old_pdu, *pdu_temp;
|
|
uint32_t i;
|
|
struct iscsi_bhs_data_in *datain_header;
|
|
uint32_t last_statsn;
|
|
|
|
task = spdk_iscsi_task_get_primary(task);
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "spdk_iscsi_handle_recovery_datain\n");
|
|
|
|
if (beg_run < task->acked_data_sn) {
|
|
SPDK_ERRLOG("ITT: 0x%08x, DATA IN SNACK requests retransmission of"
|
|
"DATASN: from 0x%08x to 0x%08x but already acked to "
|
|
"DATASN: 0x%08x protocol error\n",
|
|
task_tag, beg_run,
|
|
(beg_run + run_length), (task->acked_data_sn - 1));
|
|
|
|
return spdk_iscsi_reject(conn, pdu, ISCSI_REASON_PROTOCOL_ERROR);
|
|
}
|
|
|
|
if (run_length == 0)
|
|
/* as the DataSN begins at 0 */
|
|
run_length = task->datain_datasn + 1;
|
|
|
|
if ((beg_run + run_length - 1) > task->datain_datasn) {
|
|
SPDK_ERRLOG("Initiator requests BegRun: 0x%08x, RunLength:"
|
|
"0x%08x greater than maximum DataSN: 0x%08x.\n",
|
|
beg_run, run_length, task->datain_datasn);
|
|
|
|
return -1;
|
|
} else
|
|
last_statsn = beg_run + run_length - 1;
|
|
|
|
for (i = beg_run; i <= last_statsn; i++) {
|
|
TAILQ_FOREACH_SAFE(old_pdu, &conn->snack_pdu_list, tailq, pdu_temp) {
|
|
if (old_pdu->bhs.opcode == ISCSI_OP_SCSI_DATAIN) {
|
|
datain_header = (struct iscsi_bhs_data_in *)&old_pdu->bhs;
|
|
if (from_be32(&datain_header->itt) == task_tag &&
|
|
from_be32(&datain_header->data_sn) == i) {
|
|
TAILQ_REMOVE(&conn->snack_pdu_list, old_pdu, tailq);
|
|
spdk_iscsi_write_pdu(conn, old_pdu);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* This function is used to handle the status snack */
|
|
static int
|
|
spdk_iscsi_handle_status_snack(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
uint32_t beg_run;
|
|
uint32_t run_length;
|
|
struct iscsi_bhs_snack_req *reqh;
|
|
uint32_t i;
|
|
uint32_t last_statsn;
|
|
bool found_pdu;
|
|
struct spdk_iscsi_pdu *old_pdu;
|
|
|
|
reqh = (struct iscsi_bhs_snack_req *)&pdu->bhs;
|
|
beg_run = from_be32(&reqh->beg_run);
|
|
run_length = from_be32(&reqh->run_len);
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "beg_run=%d, run_length=%d, conn->StatSN="
|
|
"%d, conn->exp_statsn=%d\n", beg_run, run_length,
|
|
conn->StatSN, conn->exp_statsn);
|
|
|
|
if (!beg_run)
|
|
beg_run = conn->exp_statsn;
|
|
else if (beg_run < conn->exp_statsn) {
|
|
SPDK_ERRLOG("Got Status SNACK Begrun: 0x%08x, RunLength: 0x%08x "
|
|
"but already got ExpStatSN: 0x%08x on CID:%hu.\n",
|
|
beg_run, run_length, conn->StatSN, conn->cid);
|
|
|
|
spdk_iscsi_reject(conn, pdu, ISCSI_REASON_INVALID_PDU_FIELD);
|
|
return 0;
|
|
}
|
|
|
|
last_statsn = (!run_length) ? conn->StatSN : (beg_run + run_length);
|
|
|
|
for (i = beg_run; i < last_statsn; i++) {
|
|
found_pdu = false;
|
|
TAILQ_FOREACH(old_pdu, &conn->snack_pdu_list, tailq) {
|
|
if (from_be32(&old_pdu->bhs.stat_sn) == i) {
|
|
found_pdu = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!found_pdu) {
|
|
SPDK_ERRLOG("Unable to find StatSN: 0x%08x. For a Status"
|
|
"SNACK, assuming this is a proactive SNACK "
|
|
"for an untransmitted StatSN, ignoring.\n",
|
|
beg_run);
|
|
} else {
|
|
TAILQ_REMOVE(&conn->snack_pdu_list, old_pdu, tailq);
|
|
spdk_iscsi_write_pdu(conn, old_pdu);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function is used to handle the data ack snack */
|
|
static int
|
|
spdk_iscsi_handle_data_ack(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
uint32_t transfer_tag;
|
|
uint32_t beg_run;
|
|
uint32_t run_length;
|
|
struct spdk_iscsi_pdu *old_pdu;
|
|
uint32_t old_datasn;
|
|
int rc;
|
|
struct iscsi_bhs_snack_req *reqh;
|
|
struct spdk_iscsi_task *task;
|
|
struct iscsi_bhs_data_in *datain_header;
|
|
struct spdk_iscsi_task *primary;
|
|
|
|
reqh = (struct iscsi_bhs_snack_req *)&pdu->bhs;
|
|
transfer_tag = from_be32(&reqh->ttt);
|
|
beg_run = from_be32(&reqh->beg_run);
|
|
run_length = from_be32(&reqh->run_len);
|
|
task = NULL;
|
|
datain_header = NULL;
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "beg_run=%d,transfer_tag=%d,run_len=%d\n",
|
|
beg_run, transfer_tag, run_length);
|
|
|
|
task = spdk_get_scsi_task_from_ttt(conn, transfer_tag);
|
|
if (!task) {
|
|
SPDK_ERRLOG("Data ACK SNACK for TTT: 0x%08x is invalid.\n",
|
|
transfer_tag);
|
|
goto reject_return;
|
|
}
|
|
|
|
primary = spdk_iscsi_task_get_primary(task);
|
|
if ((run_length != 0) || (beg_run < primary->acked_data_sn)) {
|
|
SPDK_ERRLOG("TTT: 0x%08x Data ACK SNACK BegRUN: %d is less than "
|
|
"the next expected acked DataSN: %d\n",
|
|
transfer_tag, beg_run, primary->acked_data_sn);
|
|
goto reject_return;
|
|
}
|
|
|
|
primary->acked_data_sn = beg_run;
|
|
|
|
/* To free the pdu */
|
|
TAILQ_FOREACH(old_pdu, &conn->snack_pdu_list, tailq) {
|
|
if (old_pdu->bhs.opcode == ISCSI_OP_SCSI_DATAIN) {
|
|
datain_header = (struct iscsi_bhs_data_in *) &old_pdu->bhs;
|
|
old_datasn = from_be32(&datain_header->data_sn);
|
|
if ((from_be32(&datain_header->ttt) == transfer_tag) &&
|
|
(old_datasn == beg_run - 1)) {
|
|
TAILQ_REMOVE(&conn->snack_pdu_list, old_pdu, tailq);
|
|
if (old_pdu->task)
|
|
spdk_iscsi_task_put(old_pdu->task);
|
|
spdk_put_pdu(old_pdu);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "Received Data ACK SNACK for TTT: 0x%08x,"
|
|
" updated acked DataSN to 0x%08x.\n", transfer_tag,
|
|
(task->acked_data_sn - 1));
|
|
|
|
return 0;
|
|
|
|
reject_return:
|
|
rc = spdk_iscsi_reject(conn, pdu, ISCSI_REASON_INVALID_SNACK);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_reject() failed\n");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function is used to remove the r2t pdu from snack_pdu_list by < task, r2t_sn> info */
|
|
static struct spdk_iscsi_pdu *
|
|
spdk_iscsi_remove_r2t_pdu_from_snack_list(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_task *task,
|
|
uint32_t r2t_sn)
|
|
{
|
|
struct spdk_iscsi_pdu *pdu = NULL;
|
|
struct iscsi_bhs_r2t *r2t_header;
|
|
bool found_pdu = false;
|
|
|
|
TAILQ_FOREACH(pdu, &conn->snack_pdu_list, tailq) {
|
|
if (pdu->bhs.opcode == ISCSI_OP_R2T) {
|
|
r2t_header = (struct iscsi_bhs_r2t *)&pdu->bhs;
|
|
if (pdu->task == task &&
|
|
from_be32(&r2t_header->r2t_sn) == r2t_sn) {
|
|
found_pdu = true;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (found_pdu)
|
|
TAILQ_REMOVE(&conn->snack_pdu_list, pdu, tailq);
|
|
else
|
|
pdu = NULL;
|
|
|
|
return pdu;
|
|
|
|
}
|
|
|
|
/* This function is used re-send the r2t packet */
|
|
static int
|
|
spdk_iscsi_send_r2t_recovery(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_task *task, uint32_t r2t_sn,
|
|
bool send_new_r2tsn)
|
|
{
|
|
struct spdk_iscsi_pdu *pdu;
|
|
struct iscsi_bhs_r2t *rsph;
|
|
uint32_t transfer_len;
|
|
uint32_t len;
|
|
|
|
/* remove the r2t pdu from the snack_list */
|
|
pdu = spdk_iscsi_remove_r2t_pdu_from_snack_list(conn, task, r2t_sn);
|
|
if (!pdu) {
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "No pdu is found\n");
|
|
return -1;
|
|
}
|
|
|
|
/* flag
|
|
* false: only need to re-send the old r2t with changing statsn
|
|
* true: we send a r2t with new r2tsn
|
|
*/
|
|
if (!send_new_r2tsn) {
|
|
to_be32(&pdu->bhs.stat_sn, conn->StatSN);
|
|
spdk_iscsi_write_pdu(conn, pdu);
|
|
} else {
|
|
rsph = (struct iscsi_bhs_r2t *)&pdu->bhs;
|
|
transfer_len = from_be32(&rsph->desired_xfer_len);
|
|
|
|
/* still need to increase the acked r2tsn */
|
|
task->acked_r2tsn++;
|
|
len = DMIN32(conn->sess->MaxBurstLength, (transfer_len -
|
|
task->next_expected_r2t_offset));
|
|
|
|
/* remove the old_r2t_pdu */
|
|
if (pdu->task)
|
|
spdk_iscsi_task_put(pdu->task);
|
|
spdk_put_pdu(pdu);
|
|
|
|
/* re-send a new r2t pdu */
|
|
spdk_iscsi_send_r2t(conn, task, task->next_expected_r2t_offset,
|
|
len, task->ttt, &task->R2TSN);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function is used to handle the snack request from the initiator */
|
|
static int
|
|
spdk_iscsi_op_snack(struct spdk_iscsi_conn *conn, struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
struct iscsi_bhs_snack_req *reqh;
|
|
struct spdk_iscsi_task *task;
|
|
int type;
|
|
uint32_t task_tag;
|
|
uint32_t beg_run;
|
|
uint32_t run_length;
|
|
int rc;
|
|
|
|
if (conn->sess->session_type == SESSION_TYPE_DISCOVERY) {
|
|
SPDK_ERRLOG("ISCSI_OP_SNACK not allowed in discovery session\n");
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
|
|
reqh = (struct iscsi_bhs_snack_req *)&pdu->bhs;
|
|
if (!conn->sess->ErrorRecoveryLevel) {
|
|
SPDK_ERRLOG("Got a SNACK request in ErrorRecoveryLevel=0\n");
|
|
rc = spdk_iscsi_reject(conn, pdu, ISCSI_REASON_PROTOCOL_ERROR);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_reject() failed\n");
|
|
return -1;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
type = reqh->flags & ISCSI_FLAG_SNACK_TYPE_MASK;
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "The value of type is %d\n", type);
|
|
|
|
switch (type) {
|
|
case 0:
|
|
reqh = (struct iscsi_bhs_snack_req *)&pdu->bhs;
|
|
task_tag = from_be32(&reqh->itt);
|
|
beg_run = from_be32(&reqh->beg_run);
|
|
run_length = from_be32(&reqh->run_len);
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "beg_run=%d, run_length=%d, "
|
|
"task_tag=%x, transfer_tag=%u\n", beg_run,
|
|
run_length, task_tag, from_be32(&reqh->ttt));
|
|
|
|
task = spdk_get_scsi_task_from_itt(conn, task_tag,
|
|
ISCSI_OP_SCSI_DATAIN);
|
|
if (task)
|
|
return spdk_iscsi_handle_recovery_datain(conn, task, pdu,
|
|
beg_run,
|
|
run_length,
|
|
task_tag);
|
|
|
|
task = spdk_get_scsi_task_from_itt(conn, task_tag, ISCSI_OP_R2T);
|
|
if (task)
|
|
return spdk_iscsi_handle_r2t_snack(conn, task, pdu,
|
|
beg_run, run_length,
|
|
task_tag);
|
|
|
|
SPDK_ERRLOG("It is Neither datain nor r2t recovery request\n");
|
|
rc = -1;
|
|
break;
|
|
case ISCSI_FLAG_SNACK_TYPE_STATUS:
|
|
rc = spdk_iscsi_handle_status_snack(conn, pdu);
|
|
break;
|
|
case ISCSI_FLAG_SNACK_TYPE_DATA_ACK:
|
|
rc = spdk_iscsi_handle_data_ack(conn, pdu);
|
|
break;
|
|
case ISCSI_FLAG_SNACK_TYPE_RDATA:
|
|
SPDK_ERRLOG("R-Data SNACK is Not Supported int spdk\n");
|
|
rc = spdk_iscsi_reject(conn, pdu, ISCSI_REASON_PROTOCOL_ERROR);
|
|
break;
|
|
default:
|
|
SPDK_ERRLOG("Unknown SNACK type %d, protocol error\n", type);
|
|
rc = spdk_iscsi_reject(conn, pdu, ISCSI_REASON_PROTOCOL_ERROR);
|
|
break;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* This fucntion is used to refree the pdu when it is acknowledged */
|
|
static void
|
|
spdk_remove_acked_pdu(struct spdk_iscsi_conn *conn,
|
|
uint32_t ExpStatSN)
|
|
{
|
|
struct spdk_iscsi_pdu *pdu, *pdu_temp;
|
|
uint32_t stat_sn;
|
|
|
|
conn->exp_statsn = DMIN32(ExpStatSN, conn->StatSN);
|
|
TAILQ_FOREACH_SAFE(pdu, &conn->snack_pdu_list, tailq, pdu_temp) {
|
|
stat_sn = from_be32(&pdu->bhs.stat_sn);
|
|
if (SN32_LT(stat_sn, conn->exp_statsn)) {
|
|
TAILQ_REMOVE(&conn->snack_pdu_list, pdu, tailq);
|
|
spdk_iscsi_conn_free_pdu(conn, pdu);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int spdk_iscsi_op_data(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
struct spdk_iscsi_task *task, *subtask;
|
|
struct iscsi_bhs_data_out *reqh;
|
|
uint32_t transfer_tag;
|
|
uint32_t task_tag;
|
|
uint32_t transfer_len;
|
|
uint32_t DataSN;
|
|
uint32_t buffer_offset;
|
|
uint32_t len;
|
|
int F_bit;
|
|
int rc;
|
|
|
|
if (conn->sess->session_type == SESSION_TYPE_DISCOVERY) {
|
|
SPDK_ERRLOG("ISCSI_OP_SCSI_DATAOUT not allowed in discovery session\n");
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
|
|
reqh = (struct iscsi_bhs_data_out *)&pdu->bhs;
|
|
F_bit = !!(reqh->flags & ISCSI_FLAG_FINAL);
|
|
transfer_tag = from_be32(&reqh->ttt);
|
|
task_tag = from_be32(&reqh->itt);
|
|
DataSN = from_be32(&reqh->data_sn);
|
|
buffer_offset = from_be32(&reqh->buffer_offset);
|
|
|
|
task = spdk_get_transfer_task(conn, transfer_tag);
|
|
if (task == NULL) {
|
|
SPDK_ERRLOG("Not found task for transfer_tag=%x\n", transfer_tag);
|
|
goto reject_return;
|
|
}
|
|
|
|
if (pdu->data_segment_len > task->desired_data_transfer_length) {
|
|
SPDK_ERRLOG("the dataout pdu data length is larger than the value sent by R2T PDU");
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
|
|
if (task->tag != task_tag) {
|
|
SPDK_ERRLOG("The r2t task tag is %u, and the dataout task tag is %u\n",
|
|
task->tag, task_tag);
|
|
goto reject_return;
|
|
}
|
|
|
|
if (DataSN != task->r2t_datasn) {
|
|
SPDK_ERRLOG("DataSN(%u) exp=%d error\n", DataSN, task->r2t_datasn);
|
|
if (conn->sess->ErrorRecoveryLevel >= 1) {
|
|
goto send_r2t_recovery_return;
|
|
} else {
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
}
|
|
|
|
if (buffer_offset != task->next_expected_r2t_offset) {
|
|
SPDK_ERRLOG("offset(%u) error\n", buffer_offset);
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
|
|
transfer_len = task->scsi.transfer_len;
|
|
task->current_r2t_length += pdu->data_segment_len;
|
|
task->next_expected_r2t_offset += pdu->data_segment_len;
|
|
task->r2t_datasn++;
|
|
|
|
if (task->current_r2t_length > conn->sess->MaxBurstLength) {
|
|
SPDK_ERRLOG("R2T burst(%u) > MaxBurstLength(%u)\n",
|
|
task->current_r2t_length,
|
|
conn->sess->MaxBurstLength);
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
|
|
if (F_bit) {
|
|
/*
|
|
* This R2T burst is done. Clear the length before we
|
|
* receive a PDU for the next R2T burst.
|
|
*/
|
|
task->current_r2t_length = 0;
|
|
}
|
|
|
|
subtask = spdk_iscsi_task_get(conn, task, spdk_iscsi_task_cpl);
|
|
if (subtask == NULL) {
|
|
SPDK_ERRLOG("Unable to acquire subtask\n");
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
subtask->scsi.offset = buffer_offset;
|
|
subtask->scsi.length = pdu->data_segment_len;
|
|
spdk_scsi_task_set_data(&subtask->scsi, pdu->data, pdu->data_segment_len);
|
|
spdk_iscsi_task_associate_pdu(subtask, pdu);
|
|
|
|
if (task->next_expected_r2t_offset == transfer_len) {
|
|
task->acked_r2tsn++;
|
|
} else if (F_bit && (task->next_r2t_offset < transfer_len)) {
|
|
task->acked_r2tsn++;
|
|
len = DMIN32(conn->sess->MaxBurstLength, (transfer_len -
|
|
task->next_r2t_offset));
|
|
rc = spdk_iscsi_send_r2t(conn, task,
|
|
task->next_r2t_offset, len,
|
|
task->ttt, &task->R2TSN);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_send_r2t() failed\n");
|
|
}
|
|
task->next_r2t_offset += len;
|
|
}
|
|
|
|
spdk_iscsi_queue_task(conn, subtask);
|
|
return 0;
|
|
|
|
send_r2t_recovery_return:
|
|
rc = spdk_iscsi_send_r2t_recovery(conn, task, task->acked_r2tsn, true);
|
|
if (rc < 0)
|
|
goto reject_return;
|
|
return rc;
|
|
|
|
reject_return:
|
|
rc = spdk_iscsi_reject(conn, pdu, ISCSI_REASON_INVALID_PDU_FIELD);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_reject() failed\n");
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
|
|
return SPDK_SUCCESS;
|
|
}
|
|
|
|
static int
|
|
spdk_iscsi_send_r2t(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_task *task, int offset,
|
|
int len, uint32_t transfer_tag, uint32_t *R2TSN)
|
|
{
|
|
struct spdk_iscsi_pdu *rsp_pdu;
|
|
struct iscsi_bhs_r2t *rsph;
|
|
|
|
/* R2T PDU */
|
|
rsp_pdu = spdk_get_pdu();
|
|
rsph = (struct iscsi_bhs_r2t *)&rsp_pdu->bhs;
|
|
rsp_pdu->data = NULL;
|
|
rsph->opcode = ISCSI_OP_R2T;
|
|
rsph->flags |= 0x80; /* bit 0 is default to 1 */
|
|
to_be64(&rsph->lun, spdk_scsi_lun_get_id(task->scsi.lun));
|
|
to_be32(&rsph->itt, task->tag);
|
|
to_be32(&rsph->ttt, transfer_tag);
|
|
|
|
to_be32(&rsph->stat_sn, conn->StatSN);
|
|
to_be32(&rsph->exp_cmd_sn, conn->sess->ExpCmdSN);
|
|
to_be32(&rsph->max_cmd_sn, conn->sess->MaxCmdSN);
|
|
|
|
to_be32(&rsph->r2t_sn, *R2TSN);
|
|
*R2TSN += 1;
|
|
|
|
task->r2t_datasn = 0; /* next expected datasn to ack */
|
|
|
|
to_be32(&rsph->buffer_offset, (uint32_t)offset);
|
|
to_be32(&rsph->desired_xfer_len, (uint32_t)len);
|
|
task->desired_data_transfer_length = (size_t)len;
|
|
|
|
/* we need to hold onto this task/cmd because until the PDU has been
|
|
* written out */
|
|
rsp_pdu->task = task;
|
|
task->scsi.ref++;
|
|
|
|
spdk_iscsi_write_pdu(conn, rsp_pdu);
|
|
|
|
return SPDK_SUCCESS;
|
|
}
|
|
|
|
int spdk_iscsi_send_nopin(struct spdk_iscsi_conn *conn)
|
|
{
|
|
struct spdk_iscsi_pdu *rsp_pdu;
|
|
struct iscsi_bhs_nop_in *rsp;
|
|
|
|
/* Only send nopin if we have logged in and are in a normal session. */
|
|
if (conn->sess == NULL ||
|
|
!conn->full_feature ||
|
|
!spdk_iscsi_param_eq_val(conn->sess->params, "SessionType", "Normal")) {
|
|
return SPDK_SUCCESS;
|
|
}
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG,
|
|
"send NOPIN isid=%"PRIx64", tsih=%u, cid=%u\n",
|
|
conn->sess->isid, conn->sess->tsih, conn->cid);
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI,
|
|
"StatSN=%u, ExpCmdSN=%u, MaxCmdSN=%u\n",
|
|
conn->StatSN, conn->sess->ExpCmdSN,
|
|
conn->sess->MaxCmdSN);
|
|
|
|
rsp_pdu = spdk_get_pdu();
|
|
rsp = (struct iscsi_bhs_nop_in *) &rsp_pdu->bhs;
|
|
rsp_pdu->data = NULL;
|
|
|
|
/*
|
|
* spdk_get_pdu() memset's the PDU for us, so only fill out the needed
|
|
* fields.
|
|
*/
|
|
rsp->opcode = ISCSI_OP_NOPIN;
|
|
rsp->flags = 0x80;
|
|
/*
|
|
* Technically the to_be32() is not needed here, since
|
|
* to_be32(0xFFFFFFFU) returns 0xFFFFFFFFU.
|
|
*/
|
|
to_be32(&rsp->itt, 0xFFFFFFFFU);
|
|
to_be32(&rsp->ttt, conn->id);
|
|
to_be32(&rsp->stat_sn, conn->StatSN);
|
|
to_be32(&rsp->exp_cmd_sn, conn->sess->ExpCmdSN);
|
|
to_be32(&rsp->max_cmd_sn, conn->sess->MaxCmdSN);
|
|
|
|
spdk_iscsi_write_pdu(conn, rsp_pdu);
|
|
conn->nop_outstanding = true;
|
|
|
|
return SPDK_SUCCESS;
|
|
}
|
|
|
|
static void
|
|
spdk_init_login_reject_response(struct spdk_iscsi_pdu *pdu, struct spdk_iscsi_pdu *rsp_pdu)
|
|
{
|
|
struct iscsi_bhs_login_rsp *rsph;
|
|
|
|
memset(rsp_pdu, 0, sizeof(struct spdk_iscsi_pdu));
|
|
rsph = (struct iscsi_bhs_login_rsp *)&rsp_pdu->bhs;
|
|
rsph->version_max = ISCSI_VERSION;
|
|
rsph->version_act = ISCSI_VERSION;
|
|
rsph->opcode = ISCSI_OP_LOGIN_RSP;
|
|
rsph->status_class = ISCSI_CLASS_INITIATOR_ERROR;
|
|
rsph->status_detail = ISCSI_LOGIN_INVALID_LOGIN_REQUEST;
|
|
rsph->itt = pdu->bhs.itt;
|
|
}
|
|
|
|
int
|
|
spdk_iscsi_execute(struct spdk_iscsi_conn *conn, struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
int opcode;
|
|
int rc;
|
|
struct spdk_iscsi_pdu *rsp_pdu = NULL;
|
|
uint32_t ExpStatSN;
|
|
uint32_t QCmdSN;
|
|
int I_bit;
|
|
struct spdk_iscsi_sess *sess;
|
|
struct iscsi_bhs_scsi_req *reqh;
|
|
|
|
if (pdu == NULL)
|
|
return -1;
|
|
|
|
opcode = pdu->bhs.opcode;
|
|
reqh = (struct iscsi_bhs_scsi_req *)&pdu->bhs;
|
|
pdu->cmd_sn = from_be32(&reqh->cmd_sn);
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI, "opcode %x\n", opcode);
|
|
|
|
if (opcode == ISCSI_OP_LOGIN) {
|
|
rc = spdk_iscsi_op_login(conn, pdu);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_op_login() failed\n");
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/* connection in login phase but receive non-login opcode
|
|
* return response code 0x020b to initiator.
|
|
* */
|
|
if (!conn->full_feature && conn->state == ISCSI_CONN_STATE_RUNNING) {
|
|
rsp_pdu = spdk_get_pdu();
|
|
spdk_init_login_reject_response(pdu, rsp_pdu);
|
|
spdk_iscsi_write_pdu(conn, rsp_pdu);
|
|
SPDK_ERRLOG("Received opcode %d in login phase\n", opcode);
|
|
return SPDK_ISCSI_LOGIN_ERROR_RESPONSE;
|
|
} else if (conn->state == ISCSI_CONN_STATE_INVALID) {
|
|
SPDK_ERRLOG("before Full Feature\n");
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
|
|
sess = conn->sess;
|
|
if (!sess) {
|
|
SPDK_ERRLOG("Connection has no associated session!\n");
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
I_bit = reqh->immediate;
|
|
if (I_bit == 0) {
|
|
if (SN32_LT(pdu->cmd_sn, sess->ExpCmdSN) ||
|
|
SN32_GT(pdu->cmd_sn, sess->MaxCmdSN)) {
|
|
if (sess->session_type == SESSION_TYPE_NORMAL &&
|
|
opcode != ISCSI_OP_SCSI_DATAOUT) {
|
|
SPDK_ERRLOG("CmdSN(%u) ignore (ExpCmdSN=%u, MaxCmdSN=%u)\n",
|
|
pdu->cmd_sn, sess->ExpCmdSN, sess->MaxCmdSN);
|
|
|
|
if (sess->ErrorRecoveryLevel >= 1)
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "Skip the error in"
|
|
" ERL 1 and 2\n");
|
|
else
|
|
return SPDK_PDU_FATAL;
|
|
}
|
|
}
|
|
} else if (pdu->cmd_sn != sess->ExpCmdSN) {
|
|
SPDK_ERRLOG("CmdSN(%u) error ExpCmdSN=%u\n", pdu->cmd_sn, sess->ExpCmdSN);
|
|
|
|
if (sess->ErrorRecoveryLevel >= 1) {
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "Skip the error in"
|
|
" ERL 1 and 2\n");
|
|
} else if (opcode != ISCSI_OP_NOPOUT) {
|
|
/*
|
|
* The Linux initiator does not send valid CmdSNs for
|
|
* nopout under heavy load, so do not close the
|
|
* connection in that case.
|
|
*/
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
}
|
|
|
|
ExpStatSN = from_be32(&reqh->exp_stat_sn);
|
|
if (SN32_GT(ExpStatSN, conn->StatSN)) {
|
|
SPDK_TRACELOG(SPDK_TRACE_DEBUG, "StatSN(%u) advanced\n",
|
|
ExpStatSN);
|
|
ExpStatSN = conn->StatSN;
|
|
}
|
|
|
|
if (sess->ErrorRecoveryLevel >= 1)
|
|
spdk_remove_acked_pdu(conn, ExpStatSN);
|
|
|
|
if (opcode == ISCSI_OP_NOPOUT || opcode == ISCSI_OP_SCSI) {
|
|
QCmdSN = sess->MaxCmdSN - sess->ExpCmdSN + 1;
|
|
QCmdSN += sess->queue_depth;
|
|
if (SN32_LT(ExpStatSN + QCmdSN, conn->StatSN)) {
|
|
SPDK_ERRLOG("StatSN(%u/%u) QCmdSN(%u) error\n",
|
|
ExpStatSN, conn->StatSN, QCmdSN);
|
|
return SPDK_ISCSI_CONNECTION_FATAL;
|
|
}
|
|
}
|
|
|
|
if (!I_bit && opcode != ISCSI_OP_SCSI_DATAOUT)
|
|
sess->ExpCmdSN++;
|
|
|
|
switch (opcode) {
|
|
case ISCSI_OP_NOPOUT:
|
|
rc = spdk_iscsi_op_nopout(conn, pdu);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("spdk_iscsi_op_nopout() failed\n");
|
|
return rc;
|
|
}
|
|
break;
|
|
|
|
case ISCSI_OP_SCSI:
|
|
rc = spdk_iscsi_op_scsi(conn, pdu);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("spdk_iscsi_op_scsi() failed\n");
|
|
return rc;
|
|
}
|
|
break;
|
|
case ISCSI_OP_TASK:
|
|
rc = spdk_iscsi_op_task(conn, pdu);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("spdk_iscsi_op_task() failed\n");
|
|
return rc;
|
|
}
|
|
break;
|
|
|
|
case ISCSI_OP_TEXT:
|
|
rc = spdk_iscsi_op_text(conn, pdu);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("spdk_iscsi_op_text() failed\n");
|
|
return rc;
|
|
}
|
|
break;
|
|
|
|
case ISCSI_OP_LOGOUT:
|
|
rc = spdk_iscsi_op_logout(conn, pdu);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("spdk_iscsi_op_logout() failed\n");
|
|
return rc;
|
|
}
|
|
break;
|
|
|
|
case ISCSI_OP_SCSI_DATAOUT:
|
|
rc = spdk_iscsi_op_data(conn, pdu);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("spdk_iscsi_op_data() failed\n");
|
|
return rc;
|
|
}
|
|
break;
|
|
|
|
case ISCSI_OP_SNACK:
|
|
rc = spdk_iscsi_op_snack(conn, pdu);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("spdk_iscsi_op_snack() failed\n");
|
|
return rc;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
SPDK_ERRLOG("unsupported opcode %x\n", opcode);
|
|
rc = spdk_iscsi_reject(conn, pdu, ISCSI_REASON_PROTOCOL_ERROR);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("spdk_iscsi_reject() failed\n");
|
|
return rc;
|
|
}
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void spdk_free_sess(struct spdk_iscsi_sess *sess)
|
|
{
|
|
if (sess == NULL)
|
|
return;
|
|
|
|
sess->tag = 0;
|
|
sess->target = NULL;
|
|
sess->session_type = SESSION_TYPE_INVALID;
|
|
spdk_iscsi_param_free(sess->params);
|
|
free(sess->conns);
|
|
spdk_scsi_port_free(&sess->initiator_port);
|
|
rte_mempool_put(g_spdk_iscsi.session_pool, (void *)sess);
|
|
}
|
|
|
|
static int
|
|
spdk_create_iscsi_sess(struct spdk_iscsi_conn *conn,
|
|
struct spdk_iscsi_tgt_node *target,
|
|
enum session_type session_type)
|
|
{
|
|
struct spdk_iscsi_sess *sess;
|
|
int rc;
|
|
|
|
rc = rte_mempool_get(g_spdk_iscsi.session_pool, (void **)&sess);
|
|
if ((rc < 0) || !sess) {
|
|
SPDK_ERRLOG("Unable to get session object\n");
|
|
SPDK_ERRLOG("MaxSessions set to %d\n", g_spdk_iscsi.MaxSessions);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* configuration values */
|
|
pthread_mutex_lock(&g_spdk_iscsi.mutex);
|
|
|
|
if (target != NULL)
|
|
pthread_mutex_lock(&target->mutex);
|
|
|
|
sess->MaxConnections = g_spdk_iscsi.MaxConnectionsPerSession;
|
|
sess->MaxOutstandingR2T = DEFAULT_MAXOUTSTANDINGR2T;
|
|
|
|
sess->DefaultTime2Wait = g_spdk_iscsi.DefaultTime2Wait;
|
|
sess->DefaultTime2Retain = g_spdk_iscsi.DefaultTime2Retain;
|
|
sess->FirstBurstLength = g_spdk_iscsi.FirstBurstLength;
|
|
sess->MaxBurstLength = g_spdk_iscsi.MaxBurstLength;
|
|
sess->InitialR2T = g_spdk_iscsi.InitialR2T;
|
|
sess->ImmediateData = g_spdk_iscsi.ImmediateData;
|
|
sess->DataPDUInOrder = g_spdk_iscsi.DataPDUInOrder;
|
|
sess->DataSequenceInOrder = g_spdk_iscsi.DataSequenceInOrder;
|
|
sess->ErrorRecoveryLevel = g_spdk_iscsi.ErrorRecoveryLevel;
|
|
|
|
if (target != NULL)
|
|
pthread_mutex_unlock(&target->mutex);
|
|
|
|
pthread_mutex_unlock(&g_spdk_iscsi.mutex);
|
|
|
|
sess->tag = conn->portal->group->tag;
|
|
|
|
sess->conns = malloc(sizeof(*sess->conns) * sess->MaxConnections);
|
|
if (!sess->conns) {
|
|
perror("conns");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(sess->conns, 0, sizeof(*sess->conns) * sess->MaxConnections);
|
|
sess->connections = 0;
|
|
|
|
sess->conns[sess->connections] = conn;
|
|
sess->connections++;
|
|
|
|
sess->params = NULL;
|
|
sess->target = NULL;
|
|
sess->isid = 0;
|
|
sess->session_type = session_type;
|
|
sess->current_text_itt = 0xffffffffU;
|
|
|
|
/* set default params */
|
|
rc = spdk_iscsi_sess_params_init(&sess->params);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_sess_params_init() failed\n");
|
|
goto error_return;
|
|
}
|
|
/* replace with config value */
|
|
rc = spdk_iscsi_param_set_int(sess->params, "MaxConnections",
|
|
sess->MaxConnections);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_set_int() failed\n");
|
|
goto error_return;
|
|
}
|
|
|
|
rc = spdk_iscsi_param_set_int(sess->params, "MaxOutstandingR2T",
|
|
sess->MaxOutstandingR2T);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_set_int() failed\n");
|
|
goto error_return;
|
|
}
|
|
|
|
rc = spdk_iscsi_param_set_int(sess->params, "DefaultTime2Wait",
|
|
sess->DefaultTime2Wait);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_set_int() failed\n");
|
|
goto error_return;
|
|
}
|
|
|
|
rc = spdk_iscsi_param_set_int(sess->params, "DefaultTime2Retain",
|
|
sess->DefaultTime2Retain);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_set_int() failed\n");
|
|
goto error_return;
|
|
}
|
|
|
|
rc = spdk_iscsi_param_set_int(sess->params, "FirstBurstLength",
|
|
sess->FirstBurstLength);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_set_int() failed\n");
|
|
goto error_return;
|
|
}
|
|
|
|
rc = spdk_iscsi_param_set_int(sess->params, "MaxBurstLength",
|
|
sess->MaxBurstLength);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_set_int() failed\n");
|
|
goto error_return;
|
|
}
|
|
|
|
rc = spdk_iscsi_param_set(sess->params, "InitialR2T",
|
|
sess->InitialR2T ? "Yes" : "No");
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_set() failed\n");
|
|
goto error_return;
|
|
}
|
|
|
|
rc = spdk_iscsi_param_set(sess->params, "ImmediateData",
|
|
sess->ImmediateData ? "Yes" : "No");
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_set() failed\n");
|
|
goto error_return;
|
|
}
|
|
|
|
rc = spdk_iscsi_param_set(sess->params, "DataPDUInOrder",
|
|
sess->DataPDUInOrder ? "Yes" : "No");
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_set() failed\n");
|
|
goto error_return;
|
|
}
|
|
|
|
rc = spdk_iscsi_param_set(sess->params, "DataSequenceInOrder",
|
|
sess->DataSequenceInOrder ? "Yes" : "No");
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_set() failed\n");
|
|
goto error_return;
|
|
}
|
|
|
|
rc = spdk_iscsi_param_set_int(sess->params, "ErrorRecoveryLevel",
|
|
sess->ErrorRecoveryLevel);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_set_int() failed\n");
|
|
goto error_return;
|
|
}
|
|
|
|
/* realloc buffer */
|
|
rc = spdk_iscsi_param_set_int(conn->params, "MaxRecvDataSegmentLength",
|
|
conn->MaxRecvDataSegmentLength);
|
|
if (rc < 0) {
|
|
SPDK_ERRLOG("iscsi_param_set_int() failed\n");
|
|
goto error_return;
|
|
}
|
|
|
|
/* sess for first connection of session */
|
|
conn->sess = sess;
|
|
return 0;
|
|
|
|
error_return:
|
|
spdk_free_sess(sess);
|
|
conn->sess = NULL;
|
|
return -1;
|
|
}
|
|
|
|
static struct spdk_iscsi_sess *
|
|
spdk_get_iscsi_sess_by_tsih(uint16_t tsih)
|
|
{
|
|
struct spdk_iscsi_sess *session;
|
|
|
|
if (tsih == 0 || tsih > g_spdk_iscsi.MaxSessions) {
|
|
return NULL;
|
|
}
|
|
|
|
session = g_spdk_iscsi.session[tsih - 1];
|
|
assert(tsih == session->tsih);
|
|
|
|
return session;
|
|
}
|
|
|
|
static int
|
|
spdk_append_iscsi_sess(struct spdk_iscsi_conn *conn,
|
|
const char *initiator_port_name, uint16_t tsih, uint16_t cid)
|
|
{
|
|
struct spdk_iscsi_sess *sess;
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI,
|
|
"append session: init port name=%s, tsih=%u, cid=%u\n",
|
|
initiator_port_name, tsih, cid);
|
|
|
|
sess = spdk_get_iscsi_sess_by_tsih(tsih);
|
|
if (sess == NULL) {
|
|
SPDK_ERRLOG("spdk_get_iscsi_sess_by_tsih failed\n");
|
|
return -1;
|
|
}
|
|
if ((conn->portal->group->tag != sess->tag) ||
|
|
(strcasecmp(initiator_port_name, spdk_scsi_port_get_name(sess->initiator_port)) != 0) ||
|
|
(conn->target != sess->target)) {
|
|
/* no match */
|
|
SPDK_ERRLOG("no MCS session for init port name=%s, tsih=%d, cid=%d\n",
|
|
initiator_port_name, tsih, cid);
|
|
return -1;
|
|
}
|
|
|
|
if (sess->connections >= sess->MaxConnections) {
|
|
/* no slot for connection */
|
|
SPDK_ERRLOG("too many connections for init port name=%s, tsih=%d, cid=%d\n",
|
|
initiator_port_name, tsih, cid);
|
|
return -1;
|
|
}
|
|
|
|
SPDK_TRACELOG(SPDK_TRACE_ISCSI, "Connections (tsih %d): %d\n", sess->tsih, sess->connections);
|
|
conn->sess = sess;
|
|
|
|
/*
|
|
* TODO: need a mutex or other sync mechanism to protect the session's
|
|
* connection list.
|
|
*/
|
|
sess->conns[sess->connections] = conn;
|
|
sess->connections++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
spdk_iscsi_shutdown(void)
|
|
{
|
|
spdk_iscsi_acceptor_stop();
|
|
spdk_iscsi_portal_grp_close_all();
|
|
spdk_shutdown_iscsi_conns();
|
|
}
|
|
|
|
bool spdk_iscsi_is_deferred_free_pdu(struct spdk_iscsi_pdu *pdu)
|
|
{
|
|
if (pdu == NULL)
|
|
return false;
|
|
|
|
if (pdu->bhs.opcode == ISCSI_OP_R2T ||
|
|
pdu->bhs.opcode == ISCSI_OP_SCSI_DATAIN)
|
|
return true;
|
|
|
|
return false;
|
|
}
|