numam-spdk/test/vhost/common.sh
Seth Howell f257be1313 doc: replace all cloudfront refs with ci.spdk.io
It's good to have a human readable domain again.

Change-Id: If773e28a267b635a94a45b07fba9a32d62d0c248
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
2020-01-31 12:36:19 +00:00

1143 lines
25 KiB
Bash

: ${SPDK_VHOST_VERBOSE=false}
: ${VHOST_DIR="$HOME/vhost_test"}
: ${QEMU_BIN="qemu-system-x86_64"}
: ${QEMU_IMG_BIN="qemu-img"}
TEST_DIR=$(readlink -f $rootdir/..)
VM_DIR=$VHOST_DIR/vms
TARGET_DIR=$VHOST_DIR/vhost
VM_PASSWORD="root"
#TODO: Move vhost_vm_image.qcow2 into VHOST_DIR on test systems.
VM_IMAGE=$HOME/vhost_vm_image.qcow2
if ! hash $QEMU_IMG_BIN $QEMU_BIN; then
error 'QEMU is not installed on this system. Unable to run vhost tests.'
exit 1
fi
mkdir -p $VHOST_DIR
mkdir -p $VM_DIR
mkdir -p $TARGET_DIR
#
# Source config describing QEMU and VHOST cores and NUMA
#
source $rootdir/test/vhost/common/autotest.config
function vhosttestinit()
{
if [ "$TEST_MODE" == "iso" ]; then
$rootdir/scripts/setup.sh
# Look for the VM image
if [[ ! -f $VM_IMAGE ]]; then
echo "VM image not found at $VM_IMAGE"
echo "Download to $HOME? [yn]"
read -r download
if [ "$download" = "y" ]; then
curl https://ci.spdk.io/download/test_resources/vhost_vm_image.tar.gz | tar xz -C $HOME
fi
fi
fi
# Look for the VM image
if [[ ! -f $VM_IMAGE ]]; then
error "VM image not found at $VM_IMAGE"
exit 1
fi
}
function vhosttestfini()
{
if [ "$TEST_MODE" == "iso" ]; then
$rootdir/scripts/setup.sh reset
fi
}
function message()
{
local verbose_out
if ! $SPDK_VHOST_VERBOSE; then
verbose_out=""
elif [[ ${FUNCNAME[2]} == "source" ]]; then
verbose_out=" (file $(basename ${BASH_SOURCE[1]}):${BASH_LINENO[1]})"
else
verbose_out=" (function ${FUNCNAME[2]}:${BASH_LINENO[1]})"
fi
local msg_type="$1"
shift
echo -e "${msg_type}${verbose_out}: $*"
}
function fail()
{
echo "===========" >&2
message "FAIL" "$@" >&2
echo "===========" >&2
exit 1
}
function error()
{
echo "===========" >&2
message "ERROR" "$@" >&2
echo "===========" >&2
# Don't 'return 1' since the stack trace will be incomplete (why?) missing upper command.
false
}
function warning()
{
message "WARN" "$@" >&2
}
function notice()
{
message "INFO" "$@"
}
function get_vhost_dir()
{
local vhost_name="$1"
if [[ -z "$vhost_name" ]]; then
error "vhost name must be provided to get_vhost_dir"
return 1
fi
echo "$TARGET_DIR/${vhost_name}"
}
function vhost_run()
{
local vhost_name="$1"
local run_gen_nvme=true
if [[ -z "$vhost_name" ]]; then
error "vhost name must be provided to vhost_run"
return 1
fi
shift
if [[ "$1" == "--no-gen-nvme" ]]; then
notice "Skipping gen_nvmf.sh NVMe bdev configuration"
run_gen_nvme=false
shift
fi
local vhost_dir
vhost_dir="$(get_vhost_dir $vhost_name)"
local vhost_app="$rootdir/app/vhost/vhost"
local vhost_log_file="$vhost_dir/vhost.log"
local vhost_pid_file="$vhost_dir/vhost.pid"
local vhost_socket="$vhost_dir/usvhost"
notice "starting vhost app in background"
[[ -r "$vhost_pid_file" ]] && vhost_kill $vhost_name
[[ -d $vhost_dir ]] && rm -f $vhost_dir/*
mkdir -p $vhost_dir
if [[ ! -x $vhost_app ]]; then
error "application not found: $vhost_app"
return 1
fi
local cmd="$vhost_app -r $vhost_dir/rpc.sock $*"
notice "Loging to: $vhost_log_file"
notice "Socket: $vhost_socket"
notice "Command: $cmd"
timing_enter vhost_start
cd $vhost_dir; $cmd &
vhost_pid=$!
echo $vhost_pid > $vhost_pid_file
notice "waiting for app to run..."
waitforlisten "$vhost_pid" "$vhost_dir/rpc.sock"
#do not generate nvmes if pci access is disabled
if [[ "$cmd" != *"--no-pci"* ]] && [[ "$cmd" != *"-u"* ]] && $run_gen_nvme; then
$rootdir/scripts/gen_nvme.sh "--json" | $rootdir/scripts/rpc.py\
-s $vhost_dir/rpc.sock load_subsystem_config
fi
notice "vhost started - pid=$vhost_pid"
timing_exit vhost_start
}
function vhost_load_config()
{
local vhost_num="$1"
local vhost_json_conf="$2"
local vhost_dir
vhost_dir="$(get_vhost_dir $vhost_num)"
$rootdir/scripts/rpc.py -s $vhost_dir/rpc.sock load_config < "$vhost_json_conf"
}
function vhost_kill()
{
local rc=0
local vhost_name="$1"
if [[ -z "$vhost_name" ]]; then
error "Must provide vhost name to vhost_kill"
return 0
fi
local vhost_dir
vhost_dir="$(get_vhost_dir $vhost_name)"
local vhost_pid_file="$vhost_dir/vhost.pid"
if [[ ! -r $vhost_pid_file ]]; then
warning "no vhost pid file found"
return 0
fi
timing_enter vhost_kill
local vhost_pid
vhost_pid="$(cat $vhost_pid_file)"
notice "killing vhost (PID $vhost_pid) app"
if kill -INT $vhost_pid > /dev/null; then
notice "sent SIGINT to vhost app - waiting 60 seconds to exit"
for ((i=0; i<60; i++)); do
if kill -0 $vhost_pid; then
echo "."
sleep 1
else
break
fi
done
if kill -0 $vhost_pid; then
error "ERROR: vhost was NOT killed - sending SIGABRT"
kill -ABRT $vhost_pid
rm $vhost_pid_file
rc=1
else
while kill -0 $vhost_pid; do
echo "."
done
fi
elif kill -0 $vhost_pid; then
error "vhost NOT killed - you need to kill it manually"
rc=1
else
notice "vhost was not running"
fi
timing_exit vhost_kill
if [[ $rc == 0 ]]; then
rm $vhost_pid_file
fi
rm -rf "$vhost_dir"
return $rc
}
function vhost_rpc
{
local vhost_name="$1"
if [[ -z "$vhost_name" ]]; then
error "vhost name must be provided to vhost_rpc"
return 1
fi
shift
$rootdir/scripts/rpc.py -s $(get_vhost_dir $vhost_name)/rpc.sock "$@"
}
###
# Mgmt functions
###
function assert_number()
{
[[ "$1" =~ [0-9]+ ]] && return 0
error "Invalid or missing paramter: need number but got '$1'"
return 1;
}
# Run command on vm with given password
# First argument - vm number
# Second argument - ssh password for vm
#
function vm_sshpass()
{
vm_num_is_valid $1 || return 1
local ssh_cmd
ssh_cmd="sshpass -p $2 ssh \
-o UserKnownHostsFile=/dev/null \
-o StrictHostKeyChecking=no \
-o User=root \
-p $(vm_ssh_socket $1) $VM_SSH_OPTIONS 127.0.0.1"
shift 2
$ssh_cmd "$@"
}
# Helper to validate VM number
# param $1 VM number
#
function vm_num_is_valid()
{
[[ "$1" =~ ^[0-9]+$ ]] && return 0
error "Invalid or missing paramter: vm number '$1'"
return 1;
}
# Print network socket for given VM number
# param $1 virtual machine number
#
function vm_ssh_socket()
{
vm_num_is_valid $1 || return 1
local vm_dir="$VM_DIR/$1"
cat $vm_dir/ssh_socket
}
function vm_fio_socket()
{
vm_num_is_valid $1 || return 1
local vm_dir="$VM_DIR/$1"
cat $vm_dir/fio_socket
}
# Execute command on given VM
# param $1 virtual machine number
#
function vm_exec()
{
vm_num_is_valid $1 || return 1
local vm_num="$1"
shift
sshpass -p "$VM_PASSWORD" ssh \
-o UserKnownHostsFile=/dev/null \
-o StrictHostKeyChecking=no \
-o User=root \
-p $(vm_ssh_socket $vm_num) $VM_SSH_OPTIONS 127.0.0.1 \
"$@"
}
# Execute scp command on given VM
# param $1 virtual machine number
#
function vm_scp()
{
vm_num_is_valid $1 || return 1
local vm_num="$1"
shift
sshpass -p "$VM_PASSWORD" scp \
-o UserKnownHostsFile=/dev/null \
-o StrictHostKeyChecking=no \
-o User=root \
-P $(vm_ssh_socket $vm_num) $VM_SSH_OPTIONS \
"$@"
}
# check if specified VM is running
# param $1 VM num
function vm_is_running()
{
vm_num_is_valid $1 || return 1
local vm_dir="$VM_DIR/$1"
if [[ ! -r $vm_dir/qemu.pid ]]; then
return 1
fi
local vm_pid
vm_pid="$(cat $vm_dir/qemu.pid)"
if /bin/kill -0 $vm_pid; then
return 0
else
if [[ $EUID -ne 0 ]]; then
warning "not root - assuming VM running since can't be checked"
return 0
fi
# not running - remove pid file
rm $vm_dir/qemu.pid
return 1
fi
}
# check if specified VM is running
# param $1 VM num
function vm_os_booted()
{
vm_num_is_valid $1 || return 1
local vm_dir="$VM_DIR/$1"
if [[ ! -r $vm_dir/qemu.pid ]]; then
error "VM $1 is not running"
return 1
fi
if ! VM_SSH_OPTIONS="-o ControlMaster=no" vm_exec $1 "true" 2>/dev/null; then
# Shutdown existing master. Ignore errors as it might not exist.
VM_SSH_OPTIONS="-O exit" vm_exec $1 "true" 2>/dev/null
return 1
fi
return 0
}
# Shutdown given VM
# param $1 virtual machine number
# return non-zero in case of error.
function vm_shutdown()
{
vm_num_is_valid $1 || return 1
local vm_dir="$VM_DIR/$1"
if [[ ! -d "$vm_dir" ]]; then
error "VM$1 ($vm_dir) not exist - setup it first"
return 1
fi
if ! vm_is_running $1; then
notice "VM$1 ($vm_dir) is not running"
return 0
fi
# Temporarily disabling exit flag for next ssh command, since it will
# "fail" due to shutdown
notice "Shutting down virtual machine $vm_dir"
set +e
vm_exec $1 "nohup sh -c 'shutdown -h -P now'" || true
notice "VM$1 is shutting down - wait a while to complete"
set -e
}
# Kill given VM
# param $1 virtual machine number
#
function vm_kill()
{
vm_num_is_valid $1 || return 1
local vm_dir="$VM_DIR/$1"
if [[ ! -r $vm_dir/qemu.pid ]]; then
return 0
fi
local vm_pid
vm_pid="$(cat $vm_dir/qemu.pid)"
notice "Killing virtual machine $vm_dir (pid=$vm_pid)"
# First kill should fail, second one must fail
if /bin/kill $vm_pid; then
notice "process $vm_pid killed"
rm $vm_dir/qemu.pid
rm -rf $vm_dir
elif vm_is_running $1; then
error "Process $vm_pid NOT killed"
return 1
fi
}
# List all VM numbers in VM_DIR
#
function vm_list_all()
{
local vms
vms="$(shopt -s nullglob; echo $VM_DIR/[0-9]*)"
if [[ -n "$vms" ]]; then
basename --multiple $vms
fi
}
# Kills all VM in $VM_DIR
#
function vm_kill_all()
{
local vm
for vm in $(vm_list_all); do
vm_kill $vm
done
rm -rf $VM_DIR
}
# Shutdown all VM in $VM_DIR
#
function vm_shutdown_all()
{
# XXX: temporarily disable to debug shutdown issue
# xtrace_disable
local vms
vms=$(vm_list_all)
local vm
for vm in $vms; do
vm_shutdown $vm
done
notice "Waiting for VMs to shutdown..."
local timeo=30
while [[ $timeo -gt 0 ]]; do
local all_vms_down=1
for vm in $vms; do
if vm_is_running $vm; then
all_vms_down=0
break
fi
done
if [[ $all_vms_down == 1 ]]; then
notice "All VMs successfully shut down"
xtrace_restore
return 0
fi
((timeo-=1))
sleep 1
done
rm -rf $VM_DIR
xtrace_restore
}
function vm_setup()
{
xtrace_disable
local OPTIND optchar vm_num
local os=""
local os_mode=""
local qemu_args=""
local disk_type_g=NOT_DEFINED
local read_only="false"
local disks=""
local raw_cache=""
local vm_incoming=""
local vm_migrate_to=""
local force_vm=""
local guest_memory=1024
local queue_number=""
local vhost_dir
vhost_dir="$(get_vhost_dir 0)"
while getopts ':-:' optchar; do
case "$optchar" in
-)
case "$OPTARG" in
os=*) os="${OPTARG#*=}" ;;
os-mode=*) os_mode="${OPTARG#*=}" ;;
qemu-args=*) qemu_args="${qemu_args} ${OPTARG#*=}" ;;
disk-type=*) disk_type_g="${OPTARG#*=}" ;;
read-only=*) read_only="${OPTARG#*=}" ;;
disks=*) disks="${OPTARG#*=}" ;;
raw-cache=*) raw_cache=",cache${OPTARG#*=}" ;;
force=*) force_vm=${OPTARG#*=} ;;
memory=*) guest_memory=${OPTARG#*=} ;;
queue_num=*) queue_number=${OPTARG#*=} ;;
incoming=*) vm_incoming="${OPTARG#*=}" ;;
migrate-to=*) vm_migrate_to="${OPTARG#*=}" ;;
vhost-name=*) vhost_dir="$(get_vhost_dir ${OPTARG#*=})" ;;
spdk-boot=*) local boot_from="${OPTARG#*=}" ;;
*)
error "unknown argument $OPTARG"
return 1
esac
;;
*)
error "vm_create Unknown param $OPTARG"
return 1
;;
esac
done
# Find next directory we can use
if [[ -n $force_vm ]]; then
vm_num=$force_vm
vm_num_is_valid $vm_num || return 1
local vm_dir="$VM_DIR/$vm_num"
[[ -d $vm_dir ]] && warning "removing existing VM in '$vm_dir'"
else
local vm_dir=""
set +x
for (( i=0; i<=256; i++)); do
local vm_dir="$VM_DIR/$i"
[[ ! -d $vm_dir ]] && break
done
xtrace_restore
vm_num=$i
fi
if [[ $vm_num -eq 256 ]]; then
error "no free VM found. do some cleanup (256 VMs created, are you insane?)"
return 1
fi
if [[ -n "$vm_migrate_to" && -n "$vm_incoming" ]]; then
error "'--incoming' and '--migrate-to' cannot be used together"
return 1
elif [[ -n "$vm_incoming" ]]; then
if [[ -n "$os_mode" || -n "$os" ]]; then
error "'--incoming' can't be used together with '--os' nor '--os-mode'"
return 1
fi
os_mode="original"
os="$VM_DIR/$vm_incoming/os.qcow2"
elif [[ -n "$vm_migrate_to" ]]; then
[[ "$os_mode" != "backing" ]] && warning "Using 'backing' mode for OS since '--migrate-to' is used"
os_mode=backing
fi
notice "Creating new VM in $vm_dir"
mkdir -p $vm_dir
if [[ "$os_mode" == "backing" ]]; then
notice "Creating backing file for OS image file: $os"
if ! $QEMU_IMG_BIN create -f qcow2 -b $os $vm_dir/os.qcow2; then
error "Failed to create OS backing file in '$vm_dir/os.qcow2' using '$os'"
return 1
fi
local os=$vm_dir/os.qcow2
elif [[ "$os_mode" == "original" ]]; then
warning "Using original OS image file: $os"
elif [[ "$os_mode" != "snapshot" ]]; then
if [[ -z "$os_mode" ]]; then
notice "No '--os-mode' parameter provided - using 'snapshot'"
os_mode="snapshot"
else
error "Invalid '--os-mode=$os_mode'"
return 1
fi
fi
# WARNING:
# each cmd+= must contain ' ${eol}' at the end
#
local eol="\\\\\n "
local qemu_mask_param="VM_${vm_num}_qemu_mask"
local qemu_numa_node_param="VM_${vm_num}_qemu_numa_node"
if [[ -z "${!qemu_mask_param}" ]] || [[ -z "${!qemu_numa_node_param}" ]]; then
error "Parameters ${qemu_mask_param} or ${qemu_numa_node_param} not found in autotest.config file"
return 1
fi
local task_mask=${!qemu_mask_param}
notice "TASK MASK: $task_mask"
local cmd="taskset -a -c $task_mask $QEMU_BIN ${eol}"
local vm_socket_offset=$(( 10000 + 100 * vm_num ))
local ssh_socket=$(( vm_socket_offset + 0 ))
local fio_socket=$(( vm_socket_offset + 1 ))
local monitor_port=$(( vm_socket_offset + 2 ))
local migration_port=$(( vm_socket_offset + 3 ))
local gdbserver_socket=$(( vm_socket_offset + 4 ))
local vnc_socket=$(( 100 + vm_num ))
local qemu_pid_file="$vm_dir/qemu.pid"
local cpu_num=0
set +x
# cpu list for taskset can be comma separated or range
# or both at the same time, so first split on commas
cpu_list=$(echo $task_mask | tr "," "\n")
queue_number=0
for c in $cpu_list; do
# if range is detected - count how many cpus
if [[ $c =~ [0-9]+-[0-9]+ ]]; then
val=$((c-1))
val=${val#-}
else
val=1
fi
cpu_num=$((cpu_num+val))
queue_number=$((queue_number+val))
done
if [ -z $queue_number ]; then
queue_number=$cpu_num
fi
xtrace_restore
local node_num=${!qemu_numa_node_param}
local boot_disk_present=false
notice "NUMA NODE: $node_num"
cmd+="-m $guest_memory --enable-kvm -cpu host -smp $cpu_num -vga std -vnc :$vnc_socket -daemonize ${eol}"
cmd+="-object memory-backend-file,id=mem,size=${guest_memory}M,mem-path=/dev/hugepages,share=on,prealloc=yes,host-nodes=$node_num,policy=bind ${eol}"
[[ $os_mode == snapshot ]] && cmd+="-snapshot ${eol}"
[[ -n "$vm_incoming" ]] && cmd+=" -incoming tcp:0:$migration_port ${eol}"
cmd+="-monitor telnet:127.0.0.1:$monitor_port,server,nowait ${eol}"
cmd+="-numa node,memdev=mem ${eol}"
cmd+="-pidfile $qemu_pid_file ${eol}"
cmd+="-serial file:$vm_dir/serial.log ${eol}"
cmd+="-D $vm_dir/qemu.log ${eol}"
cmd+="-chardev file,path=$vm_dir/seabios.log,id=seabios -device isa-debugcon,iobase=0x402,chardev=seabios ${eol}"
cmd+="-net user,hostfwd=tcp::$ssh_socket-:22,hostfwd=tcp::$fio_socket-:8765 ${eol}"
cmd+="-net nic ${eol}"
if [[ -z "$boot_from" ]]; then
cmd+="-drive file=$os,if=none,id=os_disk ${eol}"
cmd+="-device ide-hd,drive=os_disk,bootindex=0 ${eol}"
fi
if [[ $disks == '' ]] && [[ $disk_type_g == virtio* ]]; then
disks=1
fi
for disk in ${disks//:/ }; do
if [[ $disk = *","* ]]; then
disk_type=${disk#*,}
disk=${disk%,*}
else
disk_type=$disk_type_g
fi
case $disk_type in
virtio)
local raw_name="RAWSCSI"
local raw_disk=$vm_dir/test.img
if [[ -n $disk ]]; then
[[ ! -b $disk ]] && touch $disk
local raw_disk
raw_disk=$(readlink -f $disk)
fi
# Create disk file if it not exist or it is smaller than 1G
if { [[ -f $raw_disk ]] && [[ $(stat --printf="%s" $raw_disk) -lt $((1024 * 1024 * 1024)) ]]; } || \
[[ ! -e $raw_disk ]]; then
if [[ $raw_disk =~ /dev/.* ]]; then
error \
"ERROR: Virtio disk point to missing device ($raw_disk) -\n" \
" this is probably not what you want."
return 1
fi
notice "Creating Virtio disc $raw_disk"
dd if=/dev/zero of=$raw_disk bs=1024k count=1024
else
notice "Using existing image $raw_disk"
fi
cmd+="-device virtio-scsi-pci,num_queues=$queue_number ${eol}"
cmd+="-device scsi-hd,drive=hd$i,vendor=$raw_name ${eol}"
cmd+="-drive if=none,id=hd$i,file=$raw_disk,format=raw$raw_cache ${eol}"
;;
spdk_vhost_scsi)
notice "using socket $vhost_dir/naa.$disk.$vm_num"
cmd+="-chardev socket,id=char_$disk,path=$vhost_dir/naa.$disk.$vm_num ${eol}"
cmd+="-device vhost-user-scsi-pci,id=scsi_$disk,num_queues=$queue_number,chardev=char_$disk"
if [[ "$disk" == "$boot_from" ]]; then
cmd+=",bootindex=0"
boot_disk_present=true
fi
cmd+=" ${eol}"
;;
spdk_vhost_blk)
notice "using socket $vhost_dir/naa.$disk.$vm_num"
cmd+="-chardev socket,id=char_$disk,path=$vhost_dir/naa.$disk.$vm_num ${eol}"
cmd+="-device vhost-user-blk-pci,num-queues=$queue_number,chardev=char_$disk"
if [[ "$disk" == "$boot_from" ]]; then
cmd+=",bootindex=0"
boot_disk_present=true
fi
cmd+=" ${eol}"
;;
kernel_vhost)
if [[ -z $disk ]]; then
error "need WWN for $disk_type"
return 1
elif [[ ! $disk =~ ^[[:alpha:]]{3}[.][[:xdigit:]]+$ ]]; then
error "$disk_type - disk(wnn)=$disk does not look like WNN number"
return 1
fi
notice "Using kernel vhost disk wwn=$disk"
cmd+=" -device vhost-scsi-pci,wwpn=$disk,num_queues=$queue_number ${eol}"
;;
*)
error "unknown mode '$disk_type', use: virtio, spdk_vhost_scsi, spdk_vhost_blk or kernel_vhost"
return 1
esac
done
if [[ -n $boot_from ]] && [[ $boot_disk_present == false ]]; then
error "Boot from $boot_from is selected but device is not present"
return 1
fi
[[ -n $qemu_args ]] && cmd+=" $qemu_args ${eol}"
# remove last $eol
cmd="${cmd%\\\\\\n }"
notice "Saving to $vm_dir/run.sh"
(
echo '#!/bin/bash'
echo 'if [[ $EUID -ne 0 ]]; then '
echo ' echo "Go away user come back as root"'
echo ' exit 1'
echo 'fi';
echo
echo -e "qemu_cmd=\"$cmd\"";
echo
echo "echo 'Running VM in $vm_dir'"
echo "rm -f $qemu_pid_file"
echo '$qemu_cmd'
echo "echo 'Waiting for QEMU pid file'"
echo "sleep 1"
echo "[[ ! -f $qemu_pid_file ]] && sleep 1"
echo "[[ ! -f $qemu_pid_file ]] && echo 'ERROR: no qemu pid file found' && exit 1"
echo
echo "chmod +r $vm_dir/*"
echo
echo "echo '=== qemu.log ==='"
echo "cat $vm_dir/qemu.log"
echo "echo '=== qemu.log ==='"
echo '# EOF'
) > $vm_dir/run.sh
chmod +x $vm_dir/run.sh
# Save generated sockets redirection
echo $ssh_socket > $vm_dir/ssh_socket
echo $fio_socket > $vm_dir/fio_socket
echo $monitor_port > $vm_dir/monitor_port
rm -f $vm_dir/migration_port
[[ -z $vm_incoming ]] || echo $migration_port > $vm_dir/migration_port
echo $gdbserver_socket > $vm_dir/gdbserver_socket
echo $vnc_socket >> $vm_dir/vnc_socket
[[ -z $vm_incoming ]] || ln -fs $VM_DIR/$vm_incoming $vm_dir/vm_incoming
[[ -z $vm_migrate_to ]] || ln -fs $VM_DIR/$vm_migrate_to $vm_dir/vm_migrate_to
}
function vm_run()
{
local OPTIND optchar vm
local run_all=false
local vms_to_run=""
while getopts 'a-:' optchar; do
case "$optchar" in
a) run_all=true ;;
*)
error "Unknown param $OPTARG"
return 1
;;
esac
done
if $run_all; then
vms_to_run="$(vm_list_all)"
else
shift $((OPTIND-1))
for vm in "$@"; do
vm_num_is_valid $1 || return 1
if [[ ! -x $VM_DIR/$vm/run.sh ]]; then
error "VM$vm not defined - setup it first"
return 1
fi
vms_to_run+=" $vm"
done
fi
for vm in $vms_to_run; do
if vm_is_running $vm; then
warning "VM$vm ($VM_DIR/$vm) already running"
continue
fi
notice "running $VM_DIR/$vm/run.sh"
if ! $VM_DIR/$vm/run.sh; then
error "FAILED to run vm $vm"
return 1
fi
done
}
function vm_print_logs()
{
vm_num=$1
warning "================"
warning "QEMU LOG:"
if [[ -r $VM_DIR/$vm_num/qemu.log ]]; then
cat $VM_DIR/$vm_num/qemu.log
else
warning "LOG qemu.log not found"
fi
warning "VM LOG:"
if [[ -r $VM_DIR/$vm_num/serial.log ]]; then
cat $VM_DIR/$vm_num/serial.log
else
warning "LOG serial.log not found"
fi
warning "SEABIOS LOG:"
if [[ -r $VM_DIR/$vm_num/seabios.log ]]; then
cat $VM_DIR/$vm_num/seabios.log
else
warning "LOG seabios.log not found"
fi
warning "================"
}
# Wait for all created VMs to boot.
# param $1 max wait time
function vm_wait_for_boot()
{
assert_number $1
xtrace_disable
local all_booted=false
local timeout_time=$1
[[ $timeout_time -lt 10 ]] && timeout_time=10
local timeout_time
timeout_time=$(date -d "+$timeout_time seconds" +%s)
notice "Waiting for VMs to boot"
shift
if [[ "$*" == "" ]]; then
local vms_to_check="$VM_DIR/[0-9]*"
else
local vms_to_check=""
for vm in "$@"; do
vms_to_check+=" $VM_DIR/$vm"
done
fi
for vm in $vms_to_check; do
local vm_num
vm_num=$(basename $vm)
local i=0
notice "waiting for VM$vm_num ($vm)"
while ! vm_os_booted $vm_num; do
if ! vm_is_running $vm_num; then
warning "VM $vm_num is not running"
vm_print_logs $vm_num
xtrace_restore
return 1
fi
if [[ $(date +%s) -gt $timeout_time ]]; then
warning "timeout waiting for machines to boot"
vm_print_logs $vm_num
xtrace_restore
return 1
fi
if (( i > 30 )); then
local i=0
echo
fi
echo -n "."
sleep 1
done
echo ""
notice "VM$vm_num ready"
#Change Timeout for stopping services to prevent lengthy powerdowns
#Check that remote system is not Cygwin in case of Windows VMs
local vm_os
vm_os=$(vm_exec $vm_num "uname -o")
if [[ "$vm_os" != "Cygwin" ]]; then
vm_exec $vm_num "echo 'DefaultTimeoutStopSec=10' >> /etc/systemd/system.conf; systemctl daemon-reexec"
fi
done
notice "all VMs ready"
xtrace_restore
return 0
}
function vm_start_fio_server()
{
local OPTIND optchar
local readonly=''
while getopts ':-:' optchar; do
case "$optchar" in
-)
case "$OPTARG" in
fio-bin=*) local fio_bin="${OPTARG#*=}" ;;
readonly) local readonly="--readonly" ;;
*) error "Invalid argument '$OPTARG'" && return 1;;
esac
;;
*) error "Invalid argument '$OPTARG'" && return 1;;
esac
done
shift $(( OPTIND - 1 ))
for vm_num in "$@"; do
notice "Starting fio server on VM$vm_num"
if [[ $fio_bin != "" ]]; then
vm_exec $vm_num 'cat > /root/fio; chmod +x /root/fio' < $fio_bin
vm_exec $vm_num /root/fio $readonly --eta=never --server --daemonize=/root/fio.pid
else
vm_exec $vm_num fio $readonly --eta=never --server --daemonize=/root/fio.pid
fi
done
}
function vm_check_scsi_location()
{
# Script to find wanted disc
local script='shopt -s nullglob;
for entry in /sys/block/sd*; do
disk_type="$(cat $entry/device/vendor)";
if [[ $disk_type == INTEL* ]] || [[ $disk_type == RAWSCSI* ]] || [[ $disk_type == LIO-ORG* ]]; then
fname=$(basename $entry);
echo -n " $fname";
fi;
done'
SCSI_DISK="$(echo "$script" | vm_exec $1 bash -s)"
if [[ -z "$SCSI_DISK" ]]; then
error "no test disk found!"
return 1
fi
}
# Script to perform scsi device reset on all disks in VM
# param $1 VM num
# param $2..$n Disks to perform reset on
function vm_reset_scsi_devices()
{
for disk in "${@:2}"; do
notice "VM$1 Performing device reset on disk $disk"
vm_exec $1 sg_reset /dev/$disk -vNd
done
}
function vm_check_blk_location()
{
local script='shopt -s nullglob; cd /sys/block; echo vd*'
SCSI_DISK="$(echo "$script" | vm_exec $1 bash -s)"
if [[ -z "$SCSI_DISK" ]]; then
error "no blk test disk found!"
return 1
fi
}
function run_fio()
{
local arg
local job_file=""
local fio_bin=""
local vms=()
local out=""
local fio_disks=""
local vm
local run_server_mode=true
for arg in "$@"; do
case "$arg" in
--job-file=*) local job_file="${arg#*=}" ;;
--fio-bin=*) local fio_bin="${arg#*=}" ;;
--vm=*) vms+=( "${arg#*=}" ) ;;
--out=*)
local out="${arg#*=}"
mkdir -p $out
;;
--local) run_server_mode=false ;;
--json) json="--json" ;;
*)
error "Invalid argument '$arg'"
return 1
;;
esac
done
if [[ -n "$fio_bin" && ! -r "$fio_bin" ]]; then
error "FIO binary '$fio_bin' does not exist"
return 1
fi
if [[ ! -r "$job_file" ]]; then
error "Fio job '$job_file' does not exist"
return 1
fi
local job_fname
job_fname=$(basename "$job_file")
# prepare job file for each VM
for vm in "${vms[@]}"; do
local vm_num=${vm%%:*}
local vmdisks=${vm#*:}
sed "s@filename=@filename=$vmdisks@" $job_file | vm_exec $vm_num "cat > /root/$job_fname"
fio_disks+="127.0.0.1:$(vm_fio_socket $vm_num):$vmdisks,"
vm_exec $vm_num cat /root/$job_fname
if ! $run_server_mode; then
if [[ -n "$fio_bin" ]]; then
vm_exec $vm_num 'cat > /root/fio; chmod +x /root/fio' < $fio_bin
fi
notice "Running local fio on VM $vm_num"
vm_exec $vm_num "nohup /root/fio /root/$job_fname 1>/root/$job_fname.out 2>/root/$job_fname.out </dev/null & echo \$! > /root/fio.pid"
fi
done
if ! $run_server_mode; then
# Give FIO time to run
sleep 0.5
return 0
fi
$rootdir/test/vhost/common/run_fio.py --job-file=/root/$job_fname \
$([[ -n "$fio_bin" ]] && echo "--fio-bin=$fio_bin") \
--out=$out $json ${fio_disks%,}
}
# Shutdown or kill any running VM and SPDK APP.
#
function at_app_exit()
{
local vhost_name
notice "APP EXITING"
notice "killing all VMs"
vm_kill_all
# Kill vhost application
notice "killing vhost app"
for vhost_name in "$TARGET_DIR"/*; do
vhost_kill $vhost_name
done
notice "EXIT DONE"
}
function error_exit()
{
trap - ERR
print_backtrace
set +e
error "Error on $1 $2"
at_app_exit
exit 1
}