7a0a2800e0
The NVMe bdev module will support two features, delayed reconnect and delete after multiple failures of reconnect to improve error recovery. The recently added two APIs, spdk_nvme_ctrlr_reset_async() and spdk_nvme_ctrlr_reset_poll_async(), were not good enough. spdk_nvme_ctrlr_reset_ctx was not necessary. It had only a pointer to ctrlr. Using a pointer to ctrlr directly saves us from undesirable malloc error processing. Separate spdk_nvme_ctrlr_reset_async() into spdk_nvme_ctrlr_disconnect() and spdk_nvme_ctrlr_reconnect_async(). spdk_nvme_ctrlr_disconnect() disconnects ctrlr including disconnecting adminq. spdk_nvme_ctrlr_reconnect_async() moves the ctrlr state to INIT. Then rename spdk_nvme_ctrlr_reset_poll_async() by spdk_nvme_ctrlr_reconnect_poll_async(). Finally deprecate spdk_nvme_ctrlr_reset_async() and spdk_nvme_ctrlr_reset_poll_async(). The following patches will change the NVMe bdev module to use these new APIs. Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Change-Id: Id1d6858dcdc5fc2e9db0a6ebf3f79cab4f9bbcb7 Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10091 Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com>
248 lines
7.2 KiB
Plaintext
248 lines
7.2 KiB
Plaintext
{
|
|
global:
|
|
|
|
# public functions from nvme.h
|
|
spdk_nvme_transport_register;
|
|
spdk_nvme_transport_available;
|
|
spdk_nvme_transport_available_by_name;
|
|
spdk_nvme_transport_id_parse;
|
|
spdk_nvme_transport_id_populate_trstring;
|
|
spdk_nvme_transport_id_parse_trtype;
|
|
spdk_nvme_transport_id_trtype_str;
|
|
spdk_nvme_transport_id_adrfam_str;
|
|
spdk_nvme_transport_id_parse_adrfam;
|
|
spdk_nvme_transport_id_compare;
|
|
spdk_nvme_trid_populate_transport;
|
|
spdk_nvme_host_id_parse;
|
|
|
|
spdk_nvme_prchk_flags_parse;
|
|
spdk_nvme_prchk_flags_str;
|
|
|
|
spdk_nvme_probe;
|
|
spdk_nvme_connect;
|
|
spdk_nvme_connect_async;
|
|
spdk_nvme_probe_async;
|
|
spdk_nvme_probe_poll_async;
|
|
spdk_nvme_detach;
|
|
spdk_nvme_detach_async;
|
|
spdk_nvme_detach_poll_async;
|
|
spdk_nvme_detach_poll;
|
|
|
|
spdk_nvme_pcie_set_hotplug_filter;
|
|
|
|
spdk_nvme_ctrlr_is_discovery;
|
|
spdk_nvme_ctrlr_is_fabrics;
|
|
spdk_nvme_ctrlr_get_default_ctrlr_opts;
|
|
spdk_nvme_ctrlr_get_opts;
|
|
spdk_nvme_ctrlr_set_trid;
|
|
spdk_nvme_ctrlr_reset_subsystem;
|
|
spdk_nvme_ctrlr_reset;
|
|
spdk_nvme_ctrlr_prepare_for_reset;
|
|
spdk_nvme_ctrlr_reset_async;
|
|
spdk_nvme_ctrlr_reset_poll_async;
|
|
spdk_nvme_ctrlr_disconnect;
|
|
spdk_nvme_ctrlr_reconnect_async;
|
|
spdk_nvme_ctrlr_reconnect_poll_async;
|
|
spdk_nvme_ctrlr_fail;
|
|
spdk_nvme_ctrlr_is_failed;
|
|
spdk_nvme_ctrlr_get_data;
|
|
spdk_nvme_ctrlr_get_regs_csts;
|
|
spdk_nvme_ctrlr_get_regs_cc;
|
|
spdk_nvme_ctrlr_get_regs_cap;
|
|
spdk_nvme_ctrlr_get_regs_vs;
|
|
spdk_nvme_ctrlr_get_regs_cmbsz;
|
|
spdk_nvme_ctrlr_get_regs_pmrcap;
|
|
spdk_nvme_ctrlr_get_regs_bpinfo;
|
|
spdk_nvme_ctrlr_get_pmrsz;
|
|
spdk_nvme_ctrlr_get_num_ns;
|
|
spdk_nvme_ctrlr_get_pci_device;
|
|
spdk_nvme_ctrlr_get_max_xfer_size;
|
|
spdk_nvme_ctrlr_is_active_ns;
|
|
spdk_nvme_ctrlr_get_first_active_ns;
|
|
spdk_nvme_ctrlr_get_next_active_ns;
|
|
spdk_nvme_ctrlr_is_log_page_supported;
|
|
spdk_nvme_ctrlr_is_feature_supported;
|
|
spdk_nvme_ctrlr_register_aer_callback;
|
|
spdk_nvme_ctrlr_register_timeout_callback;
|
|
spdk_nvme_ctrlr_get_default_io_qpair_opts;
|
|
spdk_nvme_ctrlr_alloc_io_qpair;
|
|
spdk_nvme_ctrlr_connect_io_qpair;
|
|
spdk_nvme_ctrlr_disconnect_io_qpair;
|
|
spdk_nvme_ctrlr_reconnect_io_qpair;
|
|
spdk_nvme_ctrlr_get_admin_qp_failure_reason;
|
|
spdk_nvme_ctrlr_free_io_qpair;
|
|
spdk_nvme_ctrlr_io_cmd_raw_no_payload_build;
|
|
spdk_nvme_ctrlr_cmd_io_raw;
|
|
spdk_nvme_ctrlr_cmd_io_raw_with_md;
|
|
spdk_nvme_ctrlr_cmd_admin_raw;
|
|
spdk_nvme_ctrlr_process_admin_completions;
|
|
spdk_nvme_ctrlr_get_ns;
|
|
spdk_nvme_ctrlr_cmd_get_log_page;
|
|
spdk_nvme_ctrlr_cmd_get_log_page_ext;
|
|
spdk_nvme_ctrlr_cmd_abort;
|
|
spdk_nvme_ctrlr_cmd_abort_ext;
|
|
spdk_nvme_ctrlr_cmd_set_feature;
|
|
spdk_nvme_ctrlr_cmd_get_feature;
|
|
spdk_nvme_ctrlr_cmd_get_feature_ns;
|
|
spdk_nvme_ctrlr_cmd_set_feature_ns;
|
|
spdk_nvme_ctrlr_cmd_security_receive;
|
|
spdk_nvme_ctrlr_cmd_security_send;
|
|
spdk_nvme_ctrlr_security_receive;
|
|
spdk_nvme_ctrlr_security_send;
|
|
spdk_nvme_ctrlr_cmd_directive_receive;
|
|
spdk_nvme_ctrlr_cmd_directive_send;
|
|
spdk_nvme_ctrlr_get_flags;
|
|
spdk_nvme_ctrlr_attach_ns;
|
|
spdk_nvme_ctrlr_detach_ns;
|
|
spdk_nvme_ctrlr_create_ns;
|
|
spdk_nvme_ctrlr_delete_ns;
|
|
spdk_nvme_ctrlr_format;
|
|
spdk_nvme_ctrlr_update_firmware;
|
|
spdk_nvme_ctrlr_reserve_cmb;
|
|
spdk_nvme_ctrlr_map_cmb;
|
|
spdk_nvme_ctrlr_unmap_cmb;
|
|
spdk_nvme_ctrlr_enable_pmr;
|
|
spdk_nvme_ctrlr_disable_pmr;
|
|
spdk_nvme_ctrlr_map_pmr;
|
|
spdk_nvme_ctrlr_unmap_pmr;
|
|
spdk_nvme_ctrlr_read_boot_partition_start;
|
|
spdk_nvme_ctrlr_read_boot_partition_poll;
|
|
spdk_nvme_ctrlr_write_boot_partition;
|
|
spdk_nvme_ctrlr_get_transport_id;
|
|
spdk_nvme_ctrlr_alloc_qid;
|
|
spdk_nvme_ctrlr_free_qid;
|
|
spdk_nvme_ctrlr_set_remove_cb;
|
|
spdk_nvme_ctrlr_get_memory_domains;
|
|
|
|
spdk_nvme_poll_group_create;
|
|
spdk_nvme_poll_group_add;
|
|
spdk_nvme_poll_group_remove;
|
|
spdk_nvme_poll_group_destroy;
|
|
spdk_nvme_poll_group_process_completions;
|
|
spdk_nvme_poll_group_get_ctx;
|
|
|
|
spdk_nvme_ns_get_data;
|
|
spdk_nvme_ns_get_id;
|
|
spdk_nvme_ns_get_ctrlr;
|
|
spdk_nvme_ns_is_active;
|
|
spdk_nvme_ns_get_max_io_xfer_size;
|
|
spdk_nvme_ns_get_sector_size;
|
|
spdk_nvme_ns_get_extended_sector_size;
|
|
spdk_nvme_ns_get_num_sectors;
|
|
spdk_nvme_ns_get_size;
|
|
spdk_nvme_ns_get_pi_type;
|
|
spdk_nvme_ns_get_md_size;
|
|
spdk_nvme_ns_supports_extended_lba;
|
|
spdk_nvme_ns_supports_compare;
|
|
spdk_nvme_ns_get_dealloc_logical_block_read_value;
|
|
spdk_nvme_ns_get_optimal_io_boundary;
|
|
spdk_nvme_ns_get_nguid;
|
|
spdk_nvme_ns_get_uuid;
|
|
spdk_nvme_ns_get_csi;
|
|
spdk_nvme_ns_get_flags;
|
|
spdk_nvme_ns_get_ana_group_id;
|
|
spdk_nvme_ns_get_ana_state;
|
|
|
|
spdk_nvme_ns_cmd_write;
|
|
spdk_nvme_ns_cmd_writev;
|
|
spdk_nvme_ns_cmd_writev_with_md;
|
|
spdk_nvme_ns_cmd_write_with_md;
|
|
spdk_nvme_ns_cmd_write_zeroes;
|
|
spdk_nvme_ns_cmd_write_uncorrectable;
|
|
spdk_nvme_ns_cmd_read;
|
|
spdk_nvme_ns_cmd_readv;
|
|
spdk_nvme_ns_cmd_readv_with_md;
|
|
spdk_nvme_ns_cmd_read_with_md;
|
|
spdk_nvme_ns_cmd_dataset_management;
|
|
spdk_nvme_ns_cmd_copy;
|
|
spdk_nvme_ns_cmd_flush;
|
|
spdk_nvme_ns_cmd_reservation_register;
|
|
spdk_nvme_ns_cmd_reservation_release;
|
|
spdk_nvme_ns_cmd_reservation_acquire;
|
|
spdk_nvme_ns_cmd_reservation_report;
|
|
spdk_nvme_ns_cmd_compare;
|
|
spdk_nvme_ns_cmd_comparev;
|
|
spdk_nvme_ns_cmd_comparev_with_md;
|
|
spdk_nvme_ns_cmd_compare_with_md;
|
|
spdk_nvme_ns_cmd_writev_ext;
|
|
spdk_nvme_ns_cmd_readv_ext;
|
|
|
|
spdk_nvme_qpair_get_optimal_poll_group;
|
|
spdk_nvme_qpair_process_completions;
|
|
spdk_nvme_qpair_get_failure_reason;
|
|
spdk_nvme_qpair_add_cmd_error_injection;
|
|
spdk_nvme_qpair_remove_cmd_error_injection;
|
|
spdk_nvme_qpair_print_command;
|
|
spdk_nvme_qpair_print_completion;
|
|
spdk_nvme_qpair_get_id;
|
|
|
|
spdk_nvme_print_command;
|
|
spdk_nvme_print_completion;
|
|
|
|
spdk_nvme_cpl_get_status_string;
|
|
|
|
spdk_nvme_rdma_init_hooks;
|
|
|
|
spdk_nvme_cuse_get_ctrlr_name;
|
|
spdk_nvme_cuse_get_ns_name;
|
|
spdk_nvme_cuse_register;
|
|
spdk_nvme_cuse_unregister;
|
|
spdk_nvme_cuse_update_namespaces;
|
|
|
|
spdk_nvme_poll_group_get_stats;
|
|
spdk_nvme_poll_group_free_stats;
|
|
|
|
# public functions from nvme_zns.h
|
|
spdk_nvme_zns_ns_get_data;
|
|
spdk_nvme_zns_ns_get_zone_size_sectors;
|
|
spdk_nvme_zns_ns_get_zone_size;
|
|
spdk_nvme_zns_ns_get_num_zones;
|
|
spdk_nvme_zns_ns_get_max_open_zones;
|
|
spdk_nvme_zns_ns_get_max_active_zones;
|
|
spdk_nvme_zns_ctrlr_get_data;
|
|
spdk_nvme_zns_ctrlr_get_max_zone_append_size;
|
|
spdk_nvme_zns_zone_append;
|
|
spdk_nvme_zns_zone_append_with_md;
|
|
spdk_nvme_zns_zone_appendv;
|
|
spdk_nvme_zns_zone_appendv_with_md;
|
|
spdk_nvme_zns_close_zone;
|
|
spdk_nvme_zns_finish_zone;
|
|
spdk_nvme_zns_open_zone;
|
|
spdk_nvme_zns_reset_zone;
|
|
spdk_nvme_zns_offline_zone;
|
|
spdk_nvme_zns_set_zone_desc_ext;
|
|
spdk_nvme_zns_report_zones;
|
|
spdk_nvme_zns_ext_report_zones;
|
|
|
|
# public functions from nvme_ocssd.h
|
|
spdk_nvme_ctrlr_is_ocssd_supported;
|
|
spdk_nvme_ocssd_ctrlr_cmd_geometry;
|
|
spdk_nvme_ocssd_ns_cmd_vector_reset;
|
|
spdk_nvme_ocssd_ns_cmd_vector_write;
|
|
spdk_nvme_ocssd_ns_cmd_vector_write_with_md;
|
|
spdk_nvme_ocssd_ns_cmd_vector_read;
|
|
spdk_nvme_ocssd_ns_cmd_vector_read_with_md;
|
|
spdk_nvme_ocssd_ns_cmd_vector_copy;
|
|
|
|
# public functions from opal.h
|
|
spdk_opal_dev_construct;
|
|
spdk_opal_dev_destruct;
|
|
spdk_opal_get_d0_features_info;
|
|
spdk_opal_cmd_take_ownership;
|
|
spdk_opal_cmd_revert_tper;
|
|
spdk_opal_cmd_activate_locking_sp;
|
|
spdk_opal_cmd_lock_unlock;
|
|
spdk_opal_cmd_setup_locking_range;
|
|
spdk_opal_cmd_get_max_ranges;
|
|
spdk_opal_cmd_get_locking_range_info;
|
|
spdk_opal_cmd_enable_user;
|
|
spdk_opal_cmd_add_user_to_locking_range;
|
|
spdk_opal_cmd_set_new_passwd;
|
|
spdk_opal_cmd_erase_locking_range;
|
|
spdk_opal_cmd_secure_erase_locking_range;
|
|
spdk_opal_get_locking_range_info;
|
|
spdk_opal_free_locking_range_info;
|
|
|
|
local: *;
|
|
};
|