numam-spdk/module/bdev/nvme/bdev_nvme.h
Konrad Sztyber c5ebb7ff99 bdev/nvme: use asynchronous ctrlr detach functions
This patch replaces the synchronous `spdk_nvme_detach()` calls with its
asynchronous counterparts in the controller unregister path.

An additional poller is introduced to periodically poll the NVMe driver
for detach completion.  Once the detach is completed, the poller is
unregistered and the nvme_ctrlr is destroyed.  The poller uses the same
period (1ms) as the async probe poller.

Since reset and detach cannot happen at the same time, reset_poller was
renamed to reset_detach_poller and it can now store the pointer either
to the reset or detach poller, depending on the circumstances.

Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5eb2dd6383d98d25d1f9748af08c1a13d18acb0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8729
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
2021-10-04 15:00:35 +00:00

252 lines
8.0 KiB
C

/*-
* BSD LICENSE
*
* Copyright (c) Intel Corporation. All rights reserved.
* Copyright (c) 2019 Mellanox Technologies LTD. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef SPDK_BDEV_NVME_H
#define SPDK_BDEV_NVME_H
#include "spdk/stdinc.h"
#include "spdk/queue.h"
#include "spdk/nvme.h"
#include "spdk/bdev_module.h"
TAILQ_HEAD(nvme_bdev_ctrlrs, nvme_bdev_ctrlr);
extern struct nvme_bdev_ctrlrs g_nvme_bdev_ctrlrs;
extern pthread_mutex_t g_bdev_nvme_mutex;
extern bool g_bdev_nvme_module_finish;
#define NVME_MAX_CONTROLLERS 1024
typedef void (*spdk_bdev_create_nvme_fn)(void *ctx, size_t bdev_count, int rc);
struct nvme_async_probe_ctx {
struct spdk_nvme_probe_ctx *probe_ctx;
const char *base_name;
const char **names;
uint32_t count;
uint32_t prchk_flags;
struct spdk_poller *poller;
struct spdk_nvme_transport_id trid;
struct spdk_nvme_ctrlr_opts opts;
spdk_bdev_create_nvme_fn cb_fn;
void *cb_ctx;
uint32_t populates_in_progress;
bool ctrlr_attached;
bool probe_done;
bool namespaces_populated;
};
struct nvme_ns {
uint32_t id;
struct spdk_nvme_ns *ns;
struct nvme_ctrlr *ctrlr;
struct nvme_bdev *bdev;
uint32_t ana_group_id;
enum spdk_nvme_ana_state ana_state;
struct nvme_async_probe_ctx *probe_ctx;
};
struct nvme_bdev_io;
struct nvme_bdev_ctrlr;
struct nvme_ctrlr_trid {
struct spdk_nvme_transport_id trid;
TAILQ_ENTRY(nvme_ctrlr_trid) link;
bool is_failed;
};
typedef void (*bdev_nvme_reset_cb)(void *cb_arg, int rc);
struct nvme_ctrlr {
/**
* points to pinned, physically contiguous memory region;
* contains 4KB IDENTIFY structure for controller which is
* target for CONTROLLER IDENTIFY command during initialization
*/
struct spdk_nvme_ctrlr *ctrlr;
struct nvme_ctrlr_trid *connected_trid;
int ref;
bool resetting;
bool failover_in_progress;
bool destruct;
bool destruct_after_reset;
/**
* PI check flags. This flags is set to NVMe controllers created only
* through bdev_nvme_attach_controller RPC or .INI config file. Hot added
* NVMe controllers are not included.
*/
uint32_t prchk_flags;
uint32_t num_ns;
/** Array of pointers to namespaces indexed by nsid - 1 */
struct nvme_ns **namespaces;
struct spdk_opal_dev *opal_dev;
struct spdk_poller *adminq_timer_poller;
struct spdk_thread *thread;
bdev_nvme_reset_cb reset_cb_fn;
void *reset_cb_arg;
struct spdk_nvme_ctrlr_reset_ctx *reset_ctx;
/* Poller used to check for reset/detach completion */
struct spdk_poller *reset_detach_poller;
struct spdk_nvme_detach_ctx *detach_ctx;
/** linked list pointer for device list */
TAILQ_ENTRY(nvme_ctrlr) tailq;
struct nvme_bdev_ctrlr *nbdev_ctrlr;
TAILQ_HEAD(nvme_paths, nvme_ctrlr_trid) trids;
uint32_t ana_log_page_size;
struct spdk_nvme_ana_page *ana_log_page;
struct spdk_nvme_ana_group_descriptor *copied_ana_desc;
struct nvme_async_probe_ctx *probe_ctx;
pthread_mutex_t mutex;
};
struct nvme_bdev_ctrlr {
char *name;
TAILQ_HEAD(, nvme_ctrlr) ctrlrs;
TAILQ_ENTRY(nvme_bdev_ctrlr) tailq;
};
struct nvme_bdev {
struct spdk_bdev disk;
struct nvme_ns *nvme_ns;
bool opal;
};
struct nvme_ctrlr_channel {
struct spdk_nvme_qpair *qpair;
struct nvme_poll_group *group;
TAILQ_HEAD(, spdk_bdev_io) pending_resets;
TAILQ_ENTRY(nvme_ctrlr_channel) tailq;
};
#define nvme_ctrlr_channel_get_ctrlr(ctrlr_ch) \
(struct nvme_ctrlr *)spdk_io_channel_get_io_device(spdk_io_channel_from_ctx(ctrlr_ch))
struct nvme_bdev_channel {
struct nvme_ns *nvme_ns;
struct nvme_ctrlr_channel *ctrlr_ch;
};
struct nvme_poll_group {
struct spdk_nvme_poll_group *group;
struct spdk_io_channel *accel_channel;
struct spdk_poller *poller;
bool collect_spin_stat;
uint64_t spin_ticks;
uint64_t start_ticks;
uint64_t end_ticks;
TAILQ_HEAD(, nvme_ctrlr_channel) ctrlr_ch_list;
};
struct nvme_ctrlr *nvme_ctrlr_get_by_name(const char *name);
typedef void (*nvme_ctrlr_for_each_fn)(struct nvme_ctrlr *nvme_ctrlr, void *ctx);
void nvme_ctrlr_for_each(nvme_ctrlr_for_each_fn fn, void *ctx);
void nvme_bdev_dump_trid_json(const struct spdk_nvme_transport_id *trid,
struct spdk_json_write_ctx *w);
struct nvme_ns *nvme_ctrlr_get_ns(struct nvme_ctrlr *nvme_ctrlr, uint32_t nsid);
struct nvme_ns *nvme_ctrlr_get_first_active_ns(struct nvme_ctrlr *nvme_ctrlr);
struct nvme_ns *nvme_ctrlr_get_next_active_ns(struct nvme_ctrlr *nvme_ctrlr, struct nvme_ns *ns);
enum spdk_bdev_timeout_action {
SPDK_BDEV_NVME_TIMEOUT_ACTION_NONE = 0,
SPDK_BDEV_NVME_TIMEOUT_ACTION_RESET,
SPDK_BDEV_NVME_TIMEOUT_ACTION_ABORT,
};
struct spdk_bdev_nvme_opts {
enum spdk_bdev_timeout_action action_on_timeout;
uint64_t timeout_us;
uint64_t timeout_admin_us;
uint32_t keep_alive_timeout_ms;
uint32_t retry_count;
uint32_t arbitration_burst;
uint32_t low_priority_weight;
uint32_t medium_priority_weight;
uint32_t high_priority_weight;
uint64_t nvme_adminq_poll_period_us;
uint64_t nvme_ioq_poll_period_us;
uint32_t io_queue_requests;
bool delay_cmd_submit;
};
struct spdk_nvme_qpair *bdev_nvme_get_io_qpair(struct spdk_io_channel *ctrlr_io_ch);
void bdev_nvme_get_opts(struct spdk_bdev_nvme_opts *opts);
int bdev_nvme_set_opts(const struct spdk_bdev_nvme_opts *opts);
int bdev_nvme_set_hotplug(bool enabled, uint64_t period_us, spdk_msg_fn cb, void *cb_ctx);
int bdev_nvme_create(struct spdk_nvme_transport_id *trid,
const char *base_name,
const char **names,
uint32_t count,
uint32_t prchk_flags,
spdk_bdev_create_nvme_fn cb_fn,
void *cb_ctx,
struct spdk_nvme_ctrlr_opts *opts,
bool multipath);
struct spdk_nvme_ctrlr *bdev_nvme_get_ctrlr(struct spdk_bdev *bdev);
/**
* Delete NVMe controller with all bdevs on top of it, or delete the specified path
* if there is any alternative path. Requires to pass name of NVMe controller.
*
* \param name NVMe controller name
* \param trid The specified transport ID to remove (optional)
* \return zero on success, -EINVAL on wrong parameters or -ENODEV if controller is not found
*/
int bdev_nvme_delete(const char *name, const struct spdk_nvme_transport_id *trid);
/**
* Reset NVMe controller.
*
* \param nvme_ctrlr The specified NVMe controller to reset
* \param cb_fn Function to be called back after reset completes
* \param cb_arg Argument for callback function
* \return zero on success. Negated errno on the following error conditions:
* -ENXIO: controller is being destroyed.
* -EBUSY: controller is already being reset.
*/
int bdev_nvme_reset_rpc(struct nvme_ctrlr *nvme_ctrlr, bdev_nvme_reset_cb cb_fn, void *cb_arg);
#endif /* SPDK_BDEV_NVME_H */