numam-spdk/lib/iscsi/iscsi.h
Shuhei Matsumoto a58611d513 iscsi: Remove unused macro constants
Remove unused macro constants of iSCSI.
MAX_PORTAL, MAX_INITIATOR, MAX_NETMASK are still used to determine
buffer size for JSON-RPC and iSCSI.conf and are not removed in
this patch yet.

Change-Id: I3036dc472eca09eff7fa3f6ea7e8e28b0978358f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392912
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2017-12-27 12:49:32 -05:00

385 lines
12 KiB
C

/*-
* BSD LICENSE
*
* Copyright (C) 2008-2012 Daisuke Aoyama <aoyama@peach.ne.jp>.
* Copyright (c) Intel Corporation.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef SPDK_ISCSI_H
#define SPDK_ISCSI_H
#include "spdk/stdinc.h"
#include "spdk/bdev.h"
#include "spdk/iscsi_spec.h"
#include "iscsi/param.h"
#include "iscsi/tgt_node.h"
#include "spdk/assert.h"
#define SPDK_ISCSI_BUILD_ETC "/usr/local/etc/spdk"
#define SPDK_ISCSI_DEFAULT_CONFIG SPDK_ISCSI_BUILD_ETC "/iscsi.conf"
#define SPDK_ISCSI_DEFAULT_AUTHFILE SPDK_ISCSI_BUILD_ETC "/auth.conf"
#define SPDK_ISCSI_DEFAULT_NODEBASE "iqn.2016-06.io.spdk"
#define DEFAULT_MAXR2T 4
#define MAX_INITIATOR_NAME 256
#define MAX_TARGET_NAME 256
#define MAX_PORTAL 1024
#define MAX_INITIATOR 256
#define MAX_NETMASK 256
#define MAX_SESSIONS 1024
#define MAX_ISCSI_CONNECTIONS MAX_SESSIONS
#define MAX_FIRSTBURSTLENGTH 16777215
#define DEFAULT_PORT 3260
#define DEFAULT_MAX_SESSIONS 128
#define DEFAULT_MAX_CONNECTIONS_PER_SESSION 2
#define DEFAULT_MAXOUTSTANDINGR2T 1
#define DEFAULT_DEFAULTTIME2WAIT 2
#define DEFAULT_DEFAULTTIME2RETAIN 20
#define DEFAULT_FIRSTBURSTLENGTH 8192
#define DEFAULT_INITIALR2T 1
#define DEFAULT_IMMEDIATEDATA 1
#define DEFAULT_DATAPDUINORDER 1
#define DEFAULT_DATASEQUENCEINORDER 1
#define DEFAULT_ERRORRECOVERYLEVEL 0
#define DEFAULT_TIMEOUT 60
#define MAX_NOPININTERVAL 60
#define DEFAULT_NOPININTERVAL 30
#define DEFAULT_FLUSH_TIMEOUT 8
/*
* SPDK iSCSI target currently only supports 64KB as the maximum data segment length
* it can receive from initiators. Other values may work, but no guarantees.
*/
#define SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH 65536
/*
* SPDK iSCSI target will only send a maximum of SPDK_BDEV_LARGE_BUF_MAX_SIZE data segments, even if the
* connection can support more.
*/
#define SPDK_ISCSI_MAX_SEND_DATA_SEGMENT_LENGTH SPDK_BDEV_LARGE_BUF_MAX_SIZE
/*
* Defines maximum number of data out buffers each connection can have in
* use at any given time.
*/
#define MAX_DATA_OUT_PER_CONNECTION 16
/*
* Defines maximum number of data in buffers each connection can have in
* use at any given time. So this limit does not affect I/O smaller than
* SPDK_BDEV_SMALL_BUF_MAX_SIZE.
*/
#define MAX_LARGE_DATAIN_PER_CONNECTION 64
/*
* Defines default maximum queue depth per connection and this can be
* changed by configuration file.
*/
#define DEFAULT_MAX_QUEUE_DEPTH 64
#define SPDK_ISCSI_MAX_BURST_LENGTH \
(SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH * MAX_DATA_OUT_PER_CONNECTION)
#define SPDK_ISCSI_FIRST_BURST_LENGTH 8192
/** Defines how long we should wait for a TCP close after responding to a
* logout request, before terminating the connection ourselves.
*/
#define ISCSI_LOGOUT_TIMEOUT 5 /* in seconds */
/* according to RFC1982 */
#define SN32_CMPMAX (((uint32_t)1U) << (32 - 1))
#define SN32_LT(S1,S2) \
(((uint32_t)(S1) != (uint32_t)(S2)) \
&& (((uint32_t)(S1) < (uint32_t)(S2) \
&& ((uint32_t)(S2) - (uint32_t)(S1) < SN32_CMPMAX)) \
|| ((uint32_t)(S1) > (uint32_t)(S2) \
&& ((uint32_t)(S1) - (uint32_t)(S2) > SN32_CMPMAX))))
#define SN32_GT(S1,S2) \
(((uint32_t)(S1) != (uint32_t)(S2)) \
&& (((uint32_t)(S1) < (uint32_t)(S2) \
&& ((uint32_t)(S2) - (uint32_t)(S1) > SN32_CMPMAX)) \
|| ((uint32_t)(S1) > (uint32_t)(S2) \
&& ((uint32_t)(S1) - (uint32_t)(S2) < SN32_CMPMAX))))
/* For spdk_iscsi_login_in related function use, we need to avoid the conflict
* with other errors
* */
#define SPDK_ISCSI_LOGIN_ERROR_RESPONSE -1000
#define SPDK_ISCSI_LOGIN_ERROR_PARAMETER -1001
#define SPDK_ISCSI_PARAMETER_EXCHANGE_NOT_ONCE -1002
#define ISCSI_AHS_LEN 60
struct spdk_mobj {
struct spdk_mempool *mp;
void *buf;
size_t len;
uint64_t reserved; /* do not use */
};
struct spdk_iscsi_pdu {
struct iscsi_bhs bhs;
struct spdk_mobj *mobj;
uint8_t *data_buf;
uint8_t *data;
uint8_t header_digest[ISCSI_DIGEST_LEN];
uint8_t data_digest[ISCSI_DIGEST_LEN];
size_t data_segment_len;
int bhs_valid_bytes;
int ahs_valid_bytes;
int data_valid_bytes;
int hdigest_valid_bytes;
int ddigest_valid_bytes;
int ref;
bool data_from_mempool; /* indicate whether the data buffer is allocated from mempool */
struct spdk_iscsi_task *task; /* data tied to a task buffer */
uint32_t cmd_sn;
uint32_t writev_offset;
TAILQ_ENTRY(spdk_iscsi_pdu) tailq;
/*
* 60 bytes of AHS should suffice for now.
* This should always be at the end of PDU data structure.
* we need to not zero this out when doing memory clear.
*/
uint8_t ahs[ISCSI_AHS_LEN];
struct {
uint16_t length; /* iSCSI SenseLength (big-endian) */
uint8_t data[32];
} sense;
};
enum iscsi_connection_state {
ISCSI_CONN_STATE_INVALID = 0,
ISCSI_CONN_STATE_RUNNING = 1,
ISCSI_CONN_STATE_LOGGED_OUT = 2,
ISCSI_CONN_STATE_EXITING = 3,
ISCSI_CONN_STATE_EXITED = 4,
};
enum iscsi_chap_phase {
ISCSI_CHAP_PHASE_NONE = 0,
ISCSI_CHAP_PHASE_WAIT_A = 1,
ISCSI_CHAP_PHASE_WAIT_NR = 2,
ISCSI_CHAP_PHASE_END = 3,
};
enum session_type {
SESSION_TYPE_INVALID = 0,
SESSION_TYPE_NORMAL = 1,
SESSION_TYPE_DISCOVERY = 2,
};
#define ISCSI_CHAP_CHALLENGE_LEN 1024
struct iscsi_chap_auth {
enum iscsi_chap_phase chap_phase;
char *user;
char *secret;
char *muser;
char *msecret;
uint8_t chap_id[1];
uint8_t chap_mid[1];
int chap_challenge_len;
uint8_t chap_challenge[ISCSI_CHAP_CHALLENGE_LEN];
int chap_mchallenge_len;
uint8_t chap_mchallenge[ISCSI_CHAP_CHALLENGE_LEN];
};
struct spdk_iscsi_sess {
uint32_t connections;
struct spdk_iscsi_conn **conns;
struct spdk_scsi_port *initiator_port;
int tag;
uint64_t isid;
uint16_t tsih;
struct spdk_iscsi_tgt_node *target;
int queue_depth;
struct iscsi_param *params;
enum session_type session_type;
uint32_t MaxConnections;
uint32_t MaxOutstandingR2T;
uint32_t DefaultTime2Wait;
uint32_t DefaultTime2Retain;
uint32_t FirstBurstLength;
uint32_t MaxBurstLength;
uint32_t InitialR2T;
uint32_t ImmediateData;
uint32_t DataPDUInOrder;
uint32_t DataSequenceInOrder;
uint32_t ErrorRecoveryLevel;
uint32_t ExpCmdSN;
uint32_t MaxCmdSN;
uint32_t current_text_itt;
};
struct spdk_iscsi_globals {
char *authfile;
char *nodebase;
pthread_mutex_t mutex;
TAILQ_HEAD(, spdk_iscsi_portal) portal_head;
TAILQ_HEAD(, spdk_iscsi_portal_grp) pg_head;
TAILQ_HEAD(, spdk_iscsi_init_grp) ig_head;
int ntargets;
TAILQ_HEAD(, spdk_iscsi_tgt_node) target_head;
int timeout;
int nopininterval;
int no_discovery_auth;
int req_discovery_auth;
int req_discovery_auth_mutual;
int discovery_auth_group;
uint64_t flush_timeout;
uint32_t MaxSessions;
uint32_t MaxConnectionsPerSession;
uint32_t MaxConnections;
uint32_t MaxQueueDepth;
uint32_t DefaultTime2Wait;
uint32_t DefaultTime2Retain;
uint32_t ImmediateData;
uint32_t ErrorRecoveryLevel;
uint32_t AllowDuplicateIsid;
struct spdk_mempool *pdu_pool;
struct spdk_mempool *pdu_immediate_data_pool;
struct spdk_mempool *pdu_data_out_pool;
struct spdk_mempool *session_pool;
struct spdk_mempool *task_pool;
struct spdk_iscsi_sess **session;
};
#define ISCSI_SECURITY_NEGOTIATION_PHASE 0
#define ISCSI_OPERATIONAL_NEGOTIATION_PHASE 1
#define ISCSI_NSG_RESERVED_CODE 2
#define ISCSI_FULL_FEATURE_PHASE 3
enum spdk_error_codes {
SPDK_SUCCESS = 0,
SPDK_ISCSI_CONNECTION_FATAL = -1,
SPDK_PDU_FATAL = -2,
};
#define DGET24(B) \
((( (uint32_t) *((uint8_t *)(B)+0)) << 16) \
| (((uint32_t) *((uint8_t *)(B)+1)) << 8) \
| (((uint32_t) *((uint8_t *)(B)+2)) << 0))
#define DSET24(B,D) \
(((*((uint8_t *)(B)+0)) = (uint8_t)((uint32_t)(D) >> 16)), \
((*((uint8_t *)(B)+1)) = (uint8_t)((uint32_t)(D) >> 8)), \
((*((uint8_t *)(B)+2)) = (uint8_t)((uint32_t)(D) >> 0)))
#define xstrdup(s) (s ? strdup(s) : (char *)NULL)
extern struct spdk_iscsi_globals g_spdk_iscsi;
struct spdk_iscsi_task;
int spdk_iscsi_init(void);
typedef void (*spdk_iscsi_fini_cb)(void *arg);
void spdk_iscsi_fini(spdk_iscsi_fini_cb cb_fn, void *cb_arg);
void spdk_iscsi_fini_done(void);
void spdk_iscsi_config_text(FILE *fp);
int spdk_iscsi_send_nopin(struct spdk_iscsi_conn *conn);
void spdk_iscsi_task_response(struct spdk_iscsi_conn *conn,
struct spdk_iscsi_task *task);
int spdk_iscsi_execute(struct spdk_iscsi_conn *conn, struct spdk_iscsi_pdu *pdu);
int spdk_iscsi_build_iovecs(struct spdk_iscsi_conn *conn,
struct iovec *iovec, struct spdk_iscsi_pdu *pdu);
int
spdk_iscsi_read_pdu(struct spdk_iscsi_conn *conn, struct spdk_iscsi_pdu **_pdu);
void spdk_iscsi_task_mgmt_response(struct spdk_iscsi_conn *conn,
struct spdk_iscsi_task *task);
int spdk_iscsi_conn_params_init(struct iscsi_param **params);
int spdk_iscsi_sess_params_init(struct iscsi_param **params);
void spdk_free_sess(struct spdk_iscsi_sess *sess);
void spdk_clear_all_transfer_task(struct spdk_iscsi_conn *conn,
struct spdk_scsi_lun *lun);
void spdk_del_transfer_task(struct spdk_iscsi_conn *conn, uint32_t CmdSN);
bool spdk_iscsi_is_deferred_free_pdu(struct spdk_iscsi_pdu *pdu);
int spdk_iscsi_negotiate_params(struct spdk_iscsi_conn *conn,
struct iscsi_param **params_p, uint8_t *data,
int alloc_len, int data_len);
int spdk_iscsi_copy_param2var(struct spdk_iscsi_conn *conn);
void spdk_iscsi_task_cpl(struct spdk_scsi_task *scsi_task);
void spdk_iscsi_task_mgmt_cpl(struct spdk_scsi_task *scsi_task);
/* Memory management */
void spdk_put_pdu(struct spdk_iscsi_pdu *pdu);
struct spdk_iscsi_pdu *spdk_get_pdu(void);
int spdk_iscsi_conn_handle_queued_datain_tasks(struct spdk_iscsi_conn *conn);
static inline int
spdk_get_immediate_data_buffer_size(void)
{
/*
* Specify enough extra space in addition to FirstBurstLength to
* account for a header digest, data digest and additional header
* segments (AHS). These are not normally used but they do not
* take up much space and we need to make sure the worst-case scenario
* can be satisified by the size returned here.
*/
return SPDK_ISCSI_FIRST_BURST_LENGTH +
ISCSI_DIGEST_LEN + /* data digest */
ISCSI_DIGEST_LEN + /* header digest */
8 + /* bidirectional AHS */
52; /* extended CDB AHS (for a 64-byte CDB) */
}
static inline int
spdk_get_data_out_buffer_size(void)
{
return SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
}
#endif /* SPDK_ISCSI_H */