e8ea27f859
This suite can be used to deploy containers with the following functionality (more details in README.md): - storage-target - proxy-container - traffic-generator This will run simple fio test as per fio.conf against nvmf controller provided by initiator-container. Similar task can be performed directly from initiator-container as well. Each container includes SPDK installation with most common tools, e.g. rpc.py, available under $PATH. This allows for something like: docker-compose exec storage-target rpc.py nvmf_get_subsystems Note that SPDK environment heavily depends on a running kernel hence all the containers need to be privileged. That said, to make sure containers are not affecting the host too much, some tasks must be done prior running them. This includes: - loading proper kernel modules (like nvme-fabrics, etc.) - allocating hugepages and having at least one hugetlbfs mount available under /dev/hugepages base_build is created as docker multi-stage build. This is done in order to decrease the size of the final image. The SPDK RPMs are built inside a base image and then copied over to the main image (+ fio binary) - this leaves all the dependencies inside the intermediate image instead of the final one. The resulted difference in size may look similar to the following (it may differ depending on the docker version etc.): no multi-stage build: spdk_base == 1.04GB multi-stage build: spdk_base == 261MB Signed-off-by: Michal Berger <michalx.berger@intel.com> Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com> Change-Id: I825bd0d0bb4071bd9d44b6a0749c033894899ae0 Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9055 Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Monica Kenguva <monica.kenguva@intel.com> Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
162 lines
4.2 KiB
RPMSpec
162 lines
4.2 KiB
RPMSpec
# Global macros
|
|
%define debug_package %{nil}
|
|
|
|
%{!?deps:%define deps 1}
|
|
%{!?dpdk:%define dpdk 0}
|
|
%{!?dpdk_build_path:%define dpdk_build_path "dpdk/build"}
|
|
%{!?dpdk_path:%define dpdk_path "dpdk"}
|
|
%{!?requirements:%define requirements 0}
|
|
%{!?build_requirements:%define build_requirements 0}
|
|
%{!?shared:%define shared 0}
|
|
|
|
# Spec metadata
|
|
Name: spdk
|
|
Version: %{version}
|
|
Release: %{release}
|
|
Summary: Storage Performance Development Kit
|
|
|
|
# This is a minimal set of requirements needed for SPDK apps to run when built with
|
|
# default configuration. These are also predetermined by rpmbuild. Extra requirements
|
|
# can be defined through a comma-separated list passed via $requirements when building
|
|
# the spec.
|
|
Requires: glibc
|
|
Requires: libaio
|
|
Requires: libgcc
|
|
Requires: libstdc++
|
|
Requires: libuuid
|
|
Requires: ncurses-libs
|
|
Requires: numactl-libs
|
|
Requires: openssl-libs
|
|
Requires: zlib
|
|
|
|
%if %{requirements}
|
|
Requires: %(echo "%{requirements_list}")
|
|
%endif
|
|
|
|
%if %{build_requirements}
|
|
BuildRequires: %(echo "%{build_requirements_list}")
|
|
%endif
|
|
|
|
License: BSD
|
|
URL: https://spdk.io
|
|
Source: spdk-%{version}.tar.gz
|
|
|
|
%description
|
|
|
|
The Storage Performance Development Kit (SPDK) provides a set of tools and libraries for
|
|
writing high performance, scalable, user-mode storage applications. It achieves high
|
|
performance by moving all of the necessary drivers into userspace and operating in a
|
|
polled mode instead of relying on interrupts, which avoids kernel context switches and
|
|
eliminates interrupt handling overhead.
|
|
|
|
%prep
|
|
make clean &>/dev/null || :
|
|
%setup
|
|
|
|
%build
|
|
%if %{deps}
|
|
./scripts/pkgdep.sh --docs --pmem --rdma --uring
|
|
%endif
|
|
|
|
# Rely mainly on CONFIG
|
|
./configure --disable-unit-tests --disable-tests %{configure}
|
|
make %{make}
|
|
make DESTDIR=%{buildroot} install
|
|
|
|
# Include DPDK libs in case --with-shared is in use.
|
|
%if %{dpdk}
|
|
mkdir -p %{buildroot}/usr/local/lib/dpdk
|
|
cp -a %{dpdk_build_path}/lib/* %{buildroot}/usr/local/lib/dpdk/
|
|
# Special case for SPDK_RUN_EXTERNAL_DPDK setup
|
|
[[ -e %{dpdk_path}/intel-ipsec-mb ]] && cp -a %{dpdk_path}/intel-ipsec-mb/*.so* %{buildroot}/usr/local/lib/dpdk/
|
|
[[ -e %{dpdk_path}/isa-l/build/lib ]] && cp -a %{dpdk_path}/isa-l/build/lib/*.so* %{buildroot}/usr/local/lib/dpdk/
|
|
%endif
|
|
|
|
# Try to include all the binaries that were potentially built
|
|
[[ -e build/examples ]] && cp -a build/examples/* %{buildroot}/usr/local/bin/
|
|
[[ -e build/bin ]] && cp -a build/bin/* %{buildroot}/usr/local/bin/
|
|
[[ -e build/fio ]] && cp -a build/fio %{buildroot}/usr/local/bin/fio
|
|
|
|
# And some useful setup scripts SPDK uses
|
|
mkdir -p %{buildroot}/usr/libexec/spdk
|
|
mkdir -p %{buildroot}/etc/bash_completion.d
|
|
mkdir -p %{buildroot}/etc/profile.d
|
|
mkdir -p %{buildroot}/etc/ld.so.conf.d
|
|
|
|
cat <<-EOF > %{buildroot}/etc/ld.so.conf.d/spdk.conf
|
|
/usr/local/lib
|
|
/usr/local/lib/dpdk
|
|
EOF
|
|
|
|
cat <<-'EOF' > %{buildroot}/etc/profile.d/spdk_path.sh
|
|
PATH=$PATH:/usr/libexec/spdk/scripts
|
|
PATH=$PATH:/usr/libexec/spdk/scripts/vagrant
|
|
PATH=$PATH:/usr/libexec/spdk/test/common/config
|
|
export PATH
|
|
EOF
|
|
|
|
cp -a scripts %{buildroot}/usr/libexec/spdk/scripts
|
|
ln -s /usr/libexec/spdk/scripts/bash-completion/spdk %{buildroot}/etc/bash_completion.d/
|
|
|
|
# We need to take into the account the fact that most of the scripts depend on being
|
|
# run directly from the repo. To workaround it, create common root space under dir
|
|
# like /usr/libexec/spdk and link all potential relative paths the script may try
|
|
# to reference.
|
|
|
|
# setup.sh uses pci_ids.h
|
|
ln -s /usr/local/include %{buildroot}/usr/libexec/spdk
|
|
|
|
%files
|
|
/etc/profile.d/*
|
|
/etc/bash_completion.d/*
|
|
/usr/libexec/spdk/*
|
|
/usr/local/bin/*
|
|
|
|
|
|
%package devel
|
|
Summary: SPDK development libraries and headers
|
|
|
|
%description devel
|
|
SPDK development libraries and headers
|
|
|
|
%files devel
|
|
/usr/local/include/*
|
|
%if %{shared}
|
|
/usr/local/lib/lib*.so
|
|
%endif
|
|
|
|
%package libs
|
|
Summary: SPDK libraries
|
|
|
|
%description libs
|
|
SPDK libraries
|
|
|
|
%files libs
|
|
/etc/ld.so.conf.d/*
|
|
/usr/local/lib/lib*.a
|
|
/usr/local/lib/pkgconfig/*.pc
|
|
%if %{shared}
|
|
/usr/local/lib/lib*.so.*
|
|
%endif
|
|
|
|
%post libs
|
|
ldconfig
|
|
|
|
%if %{dpdk}
|
|
%package dpdk-libs
|
|
Summary: DPDK libraries
|
|
|
|
%description dpdk-libs
|
|
DPDK libraries
|
|
|
|
%files dpdk-libs
|
|
/usr/local/lib/dpdk
|
|
|
|
%post dpdk-libs
|
|
ldconfig
|
|
%endif
|
|
|
|
%changelog
|
|
* Tue Feb 16 2021 Michal Berger <michalx.berger@intel.com>
|
|
- Initial RPM .spec for the SPDK
|