numam-spdk/include/spdk/lvol.h
Tomasz Zawadzki 65817041ba lvol: ensure enum for lvol clear method is the same as blobstore
Explicitly assign values for lvol clear method to be the same as in
blobstore.

Change-Id: Iff19d3ff14929d2160280be1483f0ff282dc2227
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446505
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
2019-02-28 20:50:27 +00:00

300 lines
9.0 KiB
C

/*-
* BSD LICENSE
*
* Copyright (c) Intel Corporation.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/** \file
* Logical Volume Interface
*/
#ifndef SPDK_LVOL_H
#define SPDK_LVOL_H
#include "spdk/stdinc.h"
#include "spdk/blob.h"
#ifdef __cplusplus
extern "C" {
#endif
struct spdk_bs_dev;
struct spdk_lvol_store;
struct spdk_lvol;
enum lvol_clear_method {
LVOL_CLEAR_WITH_DEFAULT = BLOB_CLEAR_WITH_DEFAULT,
LVOL_CLEAR_WITH_NONE = BLOB_CLEAR_WITH_NONE,
LVOL_CLEAR_WITH_UNMAP = BLOB_CLEAR_WITH_UNMAP,
LVOL_CLEAR_WITH_WRITE_ZEROES = BLOB_CLEAR_WITH_WRITE_ZEROES,
};
enum lvs_clear_method {
LVS_CLEAR_WITH_UNMAP = BS_CLEAR_WITH_UNMAP,
LVS_CLEAR_WITH_WRITE_ZEROES = BS_CLEAR_WITH_WRITE_ZEROES,
LVS_CLEAR_WITH_NONE = BS_CLEAR_WITH_NONE,
};
/* Must include null terminator. */
#define SPDK_LVS_NAME_MAX 64
#define SPDK_LVOL_NAME_MAX 64
/**
* Parameters for lvolstore initialization.
*/
struct spdk_lvs_opts {
uint32_t cluster_sz;
enum lvs_clear_method clear_method;
char name[SPDK_LVS_NAME_MAX];
};
/**
* Initialize an spdk_lvs_opts structure to the defaults.
*
* \param opts Pointer to the spdk_lvs_opts structure to initialize.
*/
void spdk_lvs_opts_init(struct spdk_lvs_opts *opts);
/**
* Callback definition for lvolstore operations, including handle to lvs.
*
* \param cb_arg Custom arguments
* \param lvol_store Handle to lvol_store or NULL when lvserrno is set
* \param lvserrno Error
*/
typedef void (*spdk_lvs_op_with_handle_complete)(void *cb_arg, struct spdk_lvol_store *lvol_store,
int lvserrno);
/**
* Callback definition for lvolstore operations without handle.
*
* \param cb_arg Custom arguments
* \param lvserrno Error
*/
typedef void (*spdk_lvs_op_complete)(void *cb_arg, int lvserrno);
/**
* Callback definition for lvol operations with handle to lvol.
*
* \param cb_arg Custom arguments
* \param lvol Handle to lvol or NULL when lvserrno is set
* \param lvolerrno Error
*/
typedef void (*spdk_lvol_op_with_handle_complete)(void *cb_arg, struct spdk_lvol *lvol,
int lvolerrno);
/**
* Callback definition for lvol operations without handle to lvol.
*
* \param cb_arg Custom arguments
* \param lvolerrno Error
*/
typedef void (*spdk_lvol_op_complete)(void *cb_arg, int lvolerrno);
/**
* Initialize lvolstore on given bs_bdev.
*
* \param bs_dev This is created on the given bdev by using spdk_bdev_create_bs_dev()
* beforehand.
* \param o Options for lvolstore.
* \param cb_fn Completion callback.
* \param cb_arg Completion callback custom arguments.
*
* \return 0 on success, negative errno on failure.
*/
int spdk_lvs_init(struct spdk_bs_dev *bs_dev, struct spdk_lvs_opts *o,
spdk_lvs_op_with_handle_complete cb_fn, void *cb_arg);
/**
* Rename the given lvolstore.
*
* \param lvs Pointer to lvolstore.
* \param new_name New name of lvs.
* \param cb_fn Completion callback.
* \param cb_arg Completion callback custom arguments.
*/
void spdk_lvs_rename(struct spdk_lvol_store *lvs, const char *new_name,
spdk_lvs_op_complete cb_fn, void *cb_arg);
/**
* Unload lvolstore.
*
* All lvols have to be closed beforehand, when doing unload.
*
* \param lvol_store Handle to lvolstore.
* \param cb_fn Completion callback.
* \param cb_arg Completion callback custom arguments.
*
* \return 0 on success, negative errno on failure.
*/
int spdk_lvs_unload(struct spdk_lvol_store *lvol_store,
spdk_lvs_op_complete cb_fn, void *cb_arg);
/**
* Destroy lvolstore.
*
* All lvols have to be closed beforehand, when doing destroy.
*
* \param lvol_store Handle to lvolstore.
* \param cb_fn Completion callback.
* \param cb_arg Completion callback custom arguments.
*
* \return 0 on success, negative errno on failure.
*/
int spdk_lvs_destroy(struct spdk_lvol_store *lvol_store,
spdk_lvs_op_complete cb_fn, void *cb_arg);
/**
* Create lvol on given lvolstore with specified size.
*
* \param lvs Handle to lvolstore.
* \param name Name of lvol.
* \param sz size of lvol in bytes.
* \param thin_provisioned Enables thin provisioning.
* \param clear_method Changes default data clusters clear method
* \param cb_fn Completion callback.
* \param cb_arg Completion callback custom arguments.
*
* \return 0 on success, negative errno on failure.
*/
int spdk_lvol_create(struct spdk_lvol_store *lvs, const char *name, uint64_t sz,
bool thin_provisioned, enum lvol_clear_method clear_method,
spdk_lvol_op_with_handle_complete cb_fn, void *cb_arg);
/**
* Create snapshot of given lvol.
*
* \param lvol Handle to lvol.
* \param snapshot_name Name of created snapshot.
* \param cb_fn Completion callback.
* \param cb_arg Completion callback custom arguments.
*/
void spdk_lvol_create_snapshot(struct spdk_lvol *lvol, const char *snapshot_name,
spdk_lvol_op_with_handle_complete cb_fn, void *cb_arg);
/**
* Create clone of given snapshot.
*
* \param lvol Handle to lvol snapshot.
* \param clone_name Name of created clone.
* \param cb_fn Completion callback.
* \param cb_arg Completion callback custom arguments.
*/
void spdk_lvol_create_clone(struct spdk_lvol *lvol, const char *clone_name,
spdk_lvol_op_with_handle_complete cb_fn, void *cb_arg);
/**
* Rename lvol with new_name.
*
* \param lvol Handle to lvol.
* \param new_name new name for lvol.
* \param cb_fn Completion callback.
* \param cb_arg Completion callback custom arguments.
*/
void
spdk_lvol_rename(struct spdk_lvol *lvol, const char *new_name,
spdk_lvol_op_complete cb_fn, void *cb_arg);
/**
* \brief Returns if it is possible to delete an lvol (i.e. lvol is not a snapshot that have at least one clone).
* \param lvol Handle to lvol
*/
bool spdk_lvol_deletable(struct spdk_lvol *lvol);
/**
* Close lvol and remove information about lvol from its lvolstore.
*
* \param lvol Handle to lvol.
* \param cb_fn Completion callback.
* \param cb_arg Completion callback custom arguments.
*/
void spdk_lvol_destroy(struct spdk_lvol *lvol, spdk_lvol_op_complete cb_fn, void *cb_arg);
/**
* Close lvol, but information is kept on lvolstore.
*
* \param lvol Handle to lvol.
* \param cb_fn Completion callback.
* \param cb_arg Completion callback custom arguments.
*/
void spdk_lvol_close(struct spdk_lvol *lvol, spdk_lvol_op_complete cb_fn, void *cb_arg);
/**
* Get I/O channel of bdev associated with specified lvol.
*
* \param lvol Handle to lvol.
*
* \return a pointer to the I/O channel.
*/
struct spdk_io_channel *spdk_lvol_get_io_channel(struct spdk_lvol *lvol);
/**
* Load lvolstore from the given blobstore device.
*
* \param bs_dev Pointer to the blobstore device.
* \param cb_fn Completion callback.
* \param cb_arg Completion callback custom arguments.
*/
void spdk_lvs_load(struct spdk_bs_dev *bs_dev, spdk_lvs_op_with_handle_complete cb_fn,
void *cb_arg);
/**
* Open a lvol.
*
* \param lvol Handle to lvol.
* \param cb_fn Completion callback.
* \param cb_arg Completion callback custom arguments.
*/
void spdk_lvol_open(struct spdk_lvol *lvol, spdk_lvol_op_with_handle_complete cb_fn, void *cb_arg);
/**
* Inflate lvol
*
* \param lvol Handle to lvol
* \param cb_fn Completion callback
* \param cb_arg Completion callback custom arguments
*/
void spdk_lvol_inflate(struct spdk_lvol *lvol, spdk_lvol_op_complete cb_fn, void *cb_arg);
/**
* Decouple parent of lvol
*
* \param lvol Handle to lvol
* \param cb_fn Completion callback
* \param cb_arg Completion callback custom arguments
*/
void spdk_lvol_decouple_parent(struct spdk_lvol *lvol, spdk_lvol_op_complete cb_fn, void *cb_arg);
#ifdef __cplusplus
}
#endif
#endif /* SPDK_LVOL_H */