d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
007aeeced6
freebsd-dev/sys/kern/vfs_bio.c

4618 lines
121 KiB
C
Raw Normal View History

Give dev_strategy() an explict cdev argument in preparation for removing buf->b-dev. Put a bio between the buf passed to dev_strategy() and the device driver strategy routine in order to not clobber fields in the buf. Assert copyright on vfs_bio.c and update copyright message to canonical text. There is no legal difference between John Dysons two-clause abbreviated BSD license and the canonical text.
2004-10-29 07:16:37 +00:00
/*-
* Copyright (c) 2004 Poul-Henning Kamp
Improve my copyright.
1997-12-22 11:54:00 +00:00
* Copyright (c) 1994,1997 John S. Dyson
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
* Copyright (c) 2013 The FreeBSD Foundation
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
* All rights reserved.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
* Portions of this software were developed by Konstantin Belousov
* under sponsorship from the FreeBSD Foundation.
*
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
Give dev_strategy() an explict cdev argument in preparation for removing buf->b-dev. Put a bio between the buf passed to dev_strategy() and the device driver strategy routine in order to not clobber fields in the buf. Assert copyright on vfs_bio.c and update copyright message to canonical text. There is no legal difference between John Dysons two-clause abbreviated BSD license and the canonical text.
2004-10-29 07:16:37 +00:00
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
/*
* this file contains a new buffer I/O scheme implementing a coherent
* VM object and buffer cache scheme. Pains have been taken to make
* sure that the performance degradation associated with schemes such
* as this is not realized.
*
* Author: John S. Dyson
* Significant help during the development and debugging phases
* had been provided by David Greenman, also of the FreeBSD core team.
Adjust some comments to prevent future confusion on the implementation. Also add a reference to the buf(9) manual page.
1998-12-22 18:57:30 +00:00
*
* see man buf(9) for more info.
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
*/
Use __FBSDID().
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
#include <sys/systm.h>
Separate the struct bio related stuff out of <sys/buf.h> into <sys/bio.h>. <sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall not be made a nested include according to bdes teachings on the subject of nested includes. Diskdrivers and similar stuff below specfs::strategy() should no longer need to include <sys/buf.> unless they need caching of data. Still a few bogus uses of struct buf to track down. Repocopy by: peter
2000-05-05 09:59:14 +00:00
#include <sys/bio.h>
The size and contents of the DEV_STRATEGY() macro has progressed to the point where it being a macro is no longer sensible, and it will only be more so in days to come. BIO_STRATEGY() is now only used from DEV_STRATEGY() and should not be used directly anymore. Put the contents of both in the new function dev_strategy() and make DEV_STRATEGY() call that function. In addition, this allows us to make the rather magic bufdonebio() helper function static. This alse saves hunderedandsome bytes of code in a typical kernel.
2003-10-18 09:03:15 +00:00
#include <sys/conf.h>
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
#include <sys/buf.h>
Un-inline the non-trivial "trivial" bio* functions. Untangle devstat_end_transaction_bio()
2002-09-14 19:34:11 +00:00
#include <sys/devicestat.h>
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
#include <sys/eventhandler.h>
fail(9) support: Add support for kernel fault injection using KFAIL_POINT_* macros and fail_point_* infrastructure. Add example fail point in vfs_bio.c to simulate VM buf pressure. Approved by: dfr (mentor)
2009-05-27 16:36:54 +00:00
#include <sys/fail.h>
Work around an integer overflow in expression `3 * maxbufspace / 4', when maxbufspace is larger than INT_MAX / 3. The overflow causes a hard hang on ia64 when physical memory is sufficiently large (8GB).
2007-06-09 23:41:14 +00:00
#include <sys/limits.h>
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mount.h>
Catch up to moving headers: - machine/ipl.h -> sys/ipl.h - machine/mutex.h -> sys/mutex.h
2000-10-20 07:58:15 +00:00
#include <sys/mutex.h>
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
#include <sys/kernel.h>
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
#include <sys/kthread.h>
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
#include <sys/proc.h>
#include <sys/resourcevar.h>
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
#include <sys/rwlock.h>
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
#include <sys/sysctl.h>
- Add a general purpose resource allocator, vmem, from NetBSD. It was originally inspired by the Solaris vmem detailed in the proceedings of usenix 2001. The NetBSD version was heavily refactored for bugs and simplicity. - Use this resource allocator to allocate the buffer and transient maps. Buffer cache defrags are reduced by 25% when used by filesystems with mixed block sizes. Ultimately this may permit dynamic buffer cache sizing on low KVA machines. Discussed with: alc, kib, attilio Tested by: pho Sponsored by: EMC / Isilon Storage Division
2013-06-28 03:51:20 +00:00
#include <sys/vmem.h>
Untangled the vm.h include file spaghetti.
1995-12-07 12:48:31 +00:00
#include <sys/vmmeter.h>
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
#include <sys/vnode.h>
Give dev_strategy() an explict cdev argument in preparation for removing buf->b-dev. Put a bio between the buf passed to dev_strategy() and the device driver strategy routine in order to not clobber fields in the buf. Assert copyright on vfs_bio.c and update copyright message to canonical text. There is no legal difference between John Dysons two-clause abbreviated BSD license and the canonical text.
2004-10-29 07:16:37 +00:00
#include <geom/geom.h>
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
#include <vm/vm.h>
Untangled the vm.h include file spaghetti.
1995-12-07 12:48:31 +00:00
#include <vm/vm_param.h>
Add and move declarations to fix all of the warnings from `gcc -Wimplicit' (except in netccitt, netiso and netns) and most of the warnings from `gcc -Wnested-externs'. Fix all the bugs found. There were no serious ones.
1995-03-16 18:17:34 +00:00
#include <vm/vm_kern.h>
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
#include <vm/vm_pageout.h>
#include <vm/vm_page.h>
#include <vm/vm_object.h>
Untangled the vm.h include file spaghetti.
1995-12-07 12:48:31 +00:00
#include <vm/vm_extern.h>
Implement a new totally dynamic (up to MAXPHYS) buffer kva allocation scheme. Additionally, add the capability for checking for unexpected kernel page faults. The maximum amount of kva space for buffers hasn't been decreased from where it is, but it will now be possible to do so. This scheme manages the kva space similar to the buffers themselves. If there isn't enough kva space because of usage or fragementation, buffers will be reclaimed until a buffer allocation is successful. This scheme should be very resistant to fragmentation problems until/if the LFS code is fixed and uses the bogus buffer locking scheme -- but a 'fixed' LFS is not likely to use such a scheme. Now there should be NO problem allocating buffers up to MAXPHYS.
1996-11-30 22:41:49 +00:00
#include <vm/vm_map.h>
Add an ABI compat shim for the vfs.bufspace sysctl for sysctl requests that try to fetch it as an int rather than a long. If the current value is greater than INT_MAX it reports a value of INT_MAX.
2009-03-10 15:26:50 +00:00
#include "opt_compat.h"
Add support for reading directly from file to userland buffer when the O_DIRECT descriptor status flag is set and both offset and length is a multiple of the physical media sector size.
2003-03-26 23:40:42 +00:00
#include "opt_directio.h"
#include "opt_swap.h"
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
Normalize a significant number of kernel malloc type names: - Prefer '_' to ' ', as it results in more easily parsed results in memory monitoring tools such as vmstat. - Remove punctuation that is incompatible with using memory type names as file names, such as '/' characters. - Disambiguate some collisions by adding subsystem prefixes to some memory types. - Generally prefer lower case to upper case. - If the same type is defined in multiple architecture directories, attempt to use the same name in additional cases. Not all instances were caught in this change, so more work is required to finish this conversion. Similar changes are required for UMA zone names.
2005-10-31 15:41:29 +00:00
static MALLOC_DEFINE(M_BIOBUF, "biobuf", "BIO buffer");
Distribute and statizice a lot of the malloc M_* types. Substantial input from: bde
1997-10-11 18:31:40 +00:00
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
struct bio_ops bioops; /* I/O operation notification */
This patch removes the VOP_BWRITE() vector. VOP_BWRITE() was a hack which made it possible for NFS client side to use struct buf with non-bio backing. This patch takes a more general approach and adds a bp->b_op vector where more methods can be added. The success of this patch depends on bp->b_op being initialized all relevant places for some value of "relevant" which is not easy to determine. For now the buffers have grown a b_magic element which will make such issues a tiny bit easier to debug.
2001-04-17 08:56:39 +00:00
struct buf_ops buf_ops_bio = {
Move the buffer method vector (buf->b_op) to the bufobj. Extend it with a strategy method. Add bufstrategy() which do the usual VOP_SPECSTRATEGY/VOP_STRATEGY song and dance. Rename ibwrite to bufwrite(). Move the two NFS buf_ops to more sensible places, add bufstrategy to them. Add inlines for bwrite() and bstrategy() which calls through buf->b_bufobj->b_ops->b_{write,strategy}(). Replace almost all VOP_STRATEGY()/VOP_SPECSTRATEGY() calls with bstrategy().
2004-10-24 20:03:41 +00:00
.bop_name = "buf_ops_bio",
.bop_write = bufwrite,
.bop_strategy = bufstrategy,
Add BO_SYNC() and add a default which uses the secret vnode pointer and VOP_FSYNC() for now.
2005-01-11 10:43:08 +00:00
.bop_sync = bufsync,
Cylinder group bitmaps and blocks containing inode for a snapshot file are after snaplock, while other ffs device buffers are before snaplock in global lock order. By itself, this could cause deadlock when bdwrite() tries to flush dirty buffers on snapshotted ffs. If, during the flush, COW activity for snapshot needs to allocate block and ffs_alloccg() selects the cylinder group that is being written by bdwrite(), then kernel would panic due to recursive buffer lock acquision. Avoid dealing with buffers in bdwrite() that are from other side of snaplock divisor in the lock order then the buffer being written. Add new BOP, bop_bdwrite(), to do dirty buffer flushing for same vnode in the bdwrite(). Default implementation, bufbdflush(), refactors the code from bdwrite(). For ffs device buffers, specialized implementation is used. Reviewed by: tegge, jeff, Russell Cattelan (cattelan xfs org, xfs changes) Tested by: Peter Holm X-MFC after: 3 weeks (if ever: it changes ABI)
2007-01-23 10:01:19 +00:00
.bop_bdflush = bufbdflush,
This patch removes the VOP_BWRITE() vector. VOP_BWRITE() was a hack which made it possible for NFS client side to use struct buf with non-bio backing. This patch takes a more general approach and adds a bp->b_op vector where more methods can be added. The success of this patch depends on bp->b_op being initialized all relevant places for some value of "relevant" which is not easy to determine. For now the buffers have grown a b_magic element which will make such issues a tiny bit easier to debug.
2001-04-17 08:56:39 +00:00
};
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
/*
* XXX buf is global because kern_shutdown.c and ffs_checkoverlap has
* carnal knowledge of buffers. This knowledge should be moved to vfs_bio.c.
*/
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
struct buf *buf; /* buffer header pool */
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
caddr_t unmapped_buf;
Moved header definitions to buf.h, and added missing splx() - found by Johannes Helander.
1994-05-26 08:45:29 +00:00
Allow the bufdaemon and update daemon processes to skip the waitrunningbufspace() calls so that they are always able to proceed and clean up buffer space. Submitted by: Brian Fundakowski Feldman <green@freebsd.org>
2003-11-04 06:30:00 +00:00
static struct proc *bufdaemonproc;
whitespace
2004-11-04 08:25:52 +00:00
static int inmem(struct vnode *vp, daddr_t blkno);
Change the implementation of vm_hold_free_pages() so that it performs at most one call to pmap_qremove(), and thus one TLB shootdown, instead of one call and TLB shootdown per page. Simplify the interface to vm_hold_free_pages(). MFC after: 3 weeks
2010-07-11 20:11:44 +00:00
static void vm_hold_free_pages(struct buf *bp, int newbsize);
stylistic polishing.
2004-09-15 20:54:23 +00:00
static void vm_hold_load_pages(struct buf *bp, vm_offset_t from,
A Major staticize sweep. Generates a couple of warnings that I'll deal with later. A number of unused vars removed. A number of unused procs removed or #ifdefed.
1995-12-14 08:32:45 +00:00
vm_offset_t to);
Eliminate page queues locking from bufdone_finish() through the following changes: Rename vfs_page_set_valid() to vfs_page_set_validclean() to reflect what this function actually does. Suggested by: tegge Introduce a new version of vfs_page_set_valid() that does no more than what the function's name implies. Specifically, it does not update the page's dirty mask, and thus it does not require the page queues lock to be held. Update two of the three callers to the old vfs_page_set_valid() to call vfs_page_set_validclean() instead because they actually require the page's dirty mask to be cleared. Introduce vm_page_set_valid(). Reviewed by: tegge
2009-05-13 05:39:39 +00:00
static void vfs_page_set_valid(struct buf *bp, vm_ooffset_t off, vm_page_t m);
static void vfs_page_set_validclean(struct buf *bp, vm_ooffset_t off,
Eliminate vfs_page_set_valid()'s unused argument.
2007-12-02 01:28:35 +00:00
vm_page_t m);
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
static void vfs_clean_pages_dirty_buf(struct buf *bp);
Refactor vfs_setdirty(), creating vfs_setdirty_locked_object(). Call vfs_setdirty_locked_object() from vfs_busy_pages() instead of vfs_setdirty(), thereby eliminating a second acquisition and release of the same vm object lock.
2006-10-29 00:04:39 +00:00
static void vfs_setdirty_locked_object(struct buf *bp);
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
static void vfs_vmio_release(struct buf *bp);
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
static int vfs_bio_clcheck(struct vnode *vp, int size,
daddr_t lblkno, daddr_t blkno);
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
static int buf_flush(int);
static int flushbufqueues(int, int);
Remove __P.
2002-03-19 21:25:46 +00:00
static void buf_daemon(void);
Make various vnode related functions static
2005-02-10 12:28:58 +00:00
static void bremfreel(struct buf *bp);
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
static __inline void bd_wakeup(void);
Don't allow vfs.lorunningspace or vfs.hirunningspace to be set such that lorunningspace is greater than hirunningspace as the system performs terribly if it is mistuned in this fashion. MFC after: 1 week
2013-11-15 15:29:53 +00:00
static int sysctl_runningspace(SYSCTL_HANDLER_ARGS);
Add an ABI compat shim for the vfs.bufspace sysctl for sysctl requests that try to fetch it as an int rather than a long. If the current value is greater than INT_MAX it reports a value of INT_MAX.
2009-03-10 15:26:50 +00:00
#if defined(COMPAT_FREEBSD4) || defined(COMPAT_FREEBSD5) || \
defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD7)
static int sysctl_bufspace(SYSCTL_HANDLER_ARGS);
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
int vmiodirenable = TRUE;
SYSCTL_INT(_vfs, OID_AUTO, vmiodirenable, CTLFLAG_RW, &vmiodirenable, 0,
"Use the VM system for directory writes");
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
long runningbufspace;
SYSCTL_LONG(_vfs, OID_AUTO, runningbufspace, CTLFLAG_RD, &runningbufspace, 0,
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
"Amount of presently outstanding async buffer io");
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
static long bufspace;
Add an ABI compat shim for the vfs.bufspace sysctl for sysctl requests that try to fetch it as an int rather than a long. If the current value is greater than INT_MAX it reports a value of INT_MAX.
2009-03-10 15:26:50 +00:00
#if defined(COMPAT_FREEBSD4) || defined(COMPAT_FREEBSD5) || \
defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD7)
SYSCTL_PROC(_vfs, OID_AUTO, bufspace, CTLTYPE_LONG|CTLFLAG_MPSAFE|CTLFLAG_RD,
Improve the description of a few sysctls. Submitted by: bde (partially) MFC after: 3 days
2009-03-23 20:18:06 +00:00
&bufspace, 0, sysctl_bufspace, "L", "Virtual memory used for buffers");
Add an ABI compat shim for the vfs.bufspace sysctl for sysctl requests that try to fetch it as an int rather than a long. If the current value is greater than INT_MAX it reports a value of INT_MAX.
2009-03-10 15:26:50 +00:00
#else
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
SYSCTL_LONG(_vfs, OID_AUTO, bufspace, CTLFLAG_RD, &bufspace, 0,
Improve the description of a few sysctls. Submitted by: bde (partially) MFC after: 3 days
2009-03-23 20:18:06 +00:00
"Virtual memory used for buffers");
Add an ABI compat shim for the vfs.bufspace sysctl for sysctl requests that try to fetch it as an int rather than a long. If the current value is greater than INT_MAX it reports a value of INT_MAX.
2009-03-10 15:26:50 +00:00
#endif
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
static long unmapped_bufspace;
SYSCTL_LONG(_vfs, OID_AUTO, unmapped_bufspace, CTLFLAG_RD,
&unmapped_bufspace, 0,
"Amount of unmapped buffers, inclusive in the bufspace");
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
static long maxbufspace;
SYSCTL_LONG(_vfs, OID_AUTO, maxbufspace, CTLFLAG_RD, &maxbufspace, 0,
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
"Maximum allowed value of bufspace (including buf_daemon)");
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
static long bufmallocspace;
SYSCTL_LONG(_vfs, OID_AUTO, bufmallocspace, CTLFLAG_RD, &bufmallocspace, 0,
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
"Amount of malloced memory for buffers");
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
static long maxbufmallocspace;
SYSCTL_LONG(_vfs, OID_AUTO, maxmallocbufspace, CTLFLAG_RW, &maxbufmallocspace, 0,
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
"Maximum amount of malloced memory for buffers");
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
static long lobufspace;
SYSCTL_LONG(_vfs, OID_AUTO, lobufspace, CTLFLAG_RD, &lobufspace, 0,
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
"Minimum amount of buffers we want to have");
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
long hibufspace;
SYSCTL_LONG(_vfs, OID_AUTO, hibufspace, CTLFLAG_RD, &hibufspace, 0,
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
"Maximum allowed value of bufspace (excluding buf_daemon)");
static int bufreusecnt;
SYSCTL_INT(_vfs, OID_AUTO, bufreusecnt, CTLFLAG_RW, &bufreusecnt, 0,
"Number of times we have reused a buffer");
static int buffreekvacnt;
SYSCTL_INT(_vfs, OID_AUTO, buffreekvacnt, CTLFLAG_RW, &buffreekvacnt, 0,
"Number of times we have freed the KVA space from some buffer");
static int bufdefragcnt;
SYSCTL_INT(_vfs, OID_AUTO, bufdefragcnt, CTLFLAG_RW, &bufdefragcnt, 0,
"Number of times we have had to repeat buffer allocation to defragment");
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
static long lorunningspace;
Don't allow vfs.lorunningspace or vfs.hirunningspace to be set such that lorunningspace is greater than hirunningspace as the system performs terribly if it is mistuned in this fashion. MFC after: 1 week
2013-11-15 15:29:53 +00:00
SYSCTL_PROC(_vfs, OID_AUTO, lorunningspace, CTLTYPE_LONG | CTLFLAG_MPSAFE |
CTLFLAG_RW, &lorunningspace, 0, sysctl_runningspace, "L",
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
"Minimum preferred space used for in-progress I/O");
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
static long hirunningspace;
Don't allow vfs.lorunningspace or vfs.hirunningspace to be set such that lorunningspace is greater than hirunningspace as the system performs terribly if it is mistuned in this fashion. MFC after: 1 week
2013-11-15 15:29:53 +00:00
SYSCTL_PROC(_vfs, OID_AUTO, hirunningspace, CTLTYPE_LONG | CTLFLAG_MPSAFE |
CTLFLAG_RW, &hirunningspace, 0, sysctl_runningspace, "L",
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
"Maximum amount of space to use for in-progress I/O");
Cylinder group bitmaps and blocks containing inode for a snapshot file are after snaplock, while other ffs device buffers are before snaplock in global lock order. By itself, this could cause deadlock when bdwrite() tries to flush dirty buffers on snapshotted ffs. If, during the flush, COW activity for snapshot needs to allocate block and ffs_alloccg() selects the cylinder group that is being written by bdwrite(), then kernel would panic due to recursive buffer lock acquision. Avoid dealing with buffers in bdwrite() that are from other side of snaplock divisor in the lock order then the buffer being written. Add new BOP, bop_bdwrite(), to do dirty buffer flushing for same vnode in the bdwrite(). Default implementation, bufbdflush(), refactors the code from bdwrite(). For ffs device buffers, specialized implementation is used. Reviewed by: tegge, jeff, Russell Cattelan (cattelan xfs org, xfs changes) Tested by: Peter Holm X-MFC after: 3 weeks (if ever: it changes ABI)
2007-01-23 10:01:19 +00:00
int dirtybufferflushes;
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
SYSCTL_INT(_vfs, OID_AUTO, dirtybufferflushes, CTLFLAG_RW, &dirtybufferflushes,
0, "Number of bdwrite to bawrite conversions to limit dirty buffers");
Cylinder group bitmaps and blocks containing inode for a snapshot file are after snaplock, while other ffs device buffers are before snaplock in global lock order. By itself, this could cause deadlock when bdwrite() tries to flush dirty buffers on snapshotted ffs. If, during the flush, COW activity for snapshot needs to allocate block and ffs_alloccg() selects the cylinder group that is being written by bdwrite(), then kernel would panic due to recursive buffer lock acquision. Avoid dealing with buffers in bdwrite() that are from other side of snaplock divisor in the lock order then the buffer being written. Add new BOP, bop_bdwrite(), to do dirty buffer flushing for same vnode in the bdwrite(). Default implementation, bufbdflush(), refactors the code from bdwrite(). For ffs device buffers, specialized implementation is used. Reviewed by: tegge, jeff, Russell Cattelan (cattelan xfs org, xfs changes) Tested by: Peter Holm X-MFC after: 3 weeks (if ever: it changes ABI)
2007-01-23 10:01:19 +00:00
int bdwriteskip;
SYSCTL_INT(_vfs, OID_AUTO, bdwriteskip, CTLFLAG_RW, &bdwriteskip,
0, "Number of buffers supplied to bdwrite with snapshot deadlock risk");
int altbufferflushes;
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
SYSCTL_INT(_vfs, OID_AUTO, altbufferflushes, CTLFLAG_RW, &altbufferflushes,
0, "Number of fsync flushes to limit dirty buffers");
When doing cleanup of excessive buffers in bdwrite (see kern/vfs_bio.c delta 1.371) we must ensure that we do not get ourselves into a recursive trap endlessly trying to clean up after ourselves. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 23:59:09 +00:00
static int recursiveflushes;
SYSCTL_INT(_vfs, OID_AUTO, recursiveflushes, CTLFLAG_RW, &recursiveflushes,
0, "Number of flushes skipped due to being recursive");
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
static int numdirtybuffers;
SYSCTL_INT(_vfs, OID_AUTO, numdirtybuffers, CTLFLAG_RD, &numdirtybuffers, 0,
"Number of buffers that are dirty (has unwritten changes) at the moment");
static int lodirtybuffers;
SYSCTL_INT(_vfs, OID_AUTO, lodirtybuffers, CTLFLAG_RW, &lodirtybuffers, 0,
"How many buffers we want to have free before bufdaemon can sleep");
static int hidirtybuffers;
SYSCTL_INT(_vfs, OID_AUTO, hidirtybuffers, CTLFLAG_RW, &hidirtybuffers, 0,
"When the number of dirty buffers is considered severe");
Cylinder group bitmaps and blocks containing inode for a snapshot file are after snaplock, while other ffs device buffers are before snaplock in global lock order. By itself, this could cause deadlock when bdwrite() tries to flush dirty buffers on snapshotted ffs. If, during the flush, COW activity for snapshot needs to allocate block and ffs_alloccg() selects the cylinder group that is being written by bdwrite(), then kernel would panic due to recursive buffer lock acquision. Avoid dealing with buffers in bdwrite() that are from other side of snaplock divisor in the lock order then the buffer being written. Add new BOP, bop_bdwrite(), to do dirty buffer flushing for same vnode in the bdwrite(). Default implementation, bufbdflush(), refactors the code from bdwrite(). For ffs device buffers, specialized implementation is used. Reviewed by: tegge, jeff, Russell Cattelan (cattelan xfs org, xfs changes) Tested by: Peter Holm X-MFC after: 3 weeks (if ever: it changes ABI)
2007-01-23 10:01:19 +00:00
int dirtybufthresh;
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
SYSCTL_INT(_vfs, OID_AUTO, dirtybufthresh, CTLFLAG_RW, &dirtybufthresh,
0, "Number of bdwrite to bawrite conversions to clear dirty buffers");
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
static int numfreebuffers;
SYSCTL_INT(_vfs, OID_AUTO, numfreebuffers, CTLFLAG_RD, &numfreebuffers, 0,
"Number of free buffers");
static int lofreebuffers;
SYSCTL_INT(_vfs, OID_AUTO, lofreebuffers, CTLFLAG_RW, &lofreebuffers, 0,
"XXX Unused");
static int hifreebuffers;
SYSCTL_INT(_vfs, OID_AUTO, hifreebuffers, CTLFLAG_RW, &hifreebuffers, 0,
"XXX Complicatedly unused");
static int getnewbufcalls;
SYSCTL_INT(_vfs, OID_AUTO, getnewbufcalls, CTLFLAG_RW, &getnewbufcalls, 0,
"Number of calls to getnewbuf");
static int getnewbufrestarts;
SYSCTL_INT(_vfs, OID_AUTO, getnewbufrestarts, CTLFLAG_RW, &getnewbufrestarts, 0,
"Number of times getnewbuf has had to restart a buffer aquisition");
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
static int mappingrestarts;
SYSCTL_INT(_vfs, OID_AUTO, mappingrestarts, CTLFLAG_RW, &mappingrestarts, 0,
"Number of times getblk has had to restart a buffer mapping for "
"unmapped buffer");
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
static int flushbufqtarget = 100;
SYSCTL_INT(_vfs, OID_AUTO, flushbufqtarget, CTLFLAG_RW, &flushbufqtarget, 0,
"Amount of work to do in flushbufqueues when helping bufdaemon");
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
static long notbufdflushes;
SYSCTL_LONG(_vfs, OID_AUTO, notbufdflushes, CTLFLAG_RD, &notbufdflushes, 0,
Export the number of times bufdaemon got help from the normal threads.
2009-04-16 09:33:52 +00:00
"Number of dirty buffer flushes done by the bufdaemon helpers");
Add barrier write capability to the VFS buffer interface. A barrier write is a disk write request that tells the disk that the buffer being written must be committed to the media along with any writes that preceeded it before any future blocks may be written to the drive. Barrier writes are provided by adding the functions bbarrierwrite (bwrite with barrier) and babarrierwrite (bawrite with barrier). Following a bbarrierwrite the client knows that the requested buffer is on the media. It does not ensure that buffers written before that buffer are on the media. It only ensure that buffers written before that buffer will get to the media before any buffers written after that buffer. A flush command must be sent to the disk to ensure that all earlier written buffers are on the media. Reviewed by: kib Tested by: Peter Holm
2013-02-16 14:51:30 +00:00
static long barrierwrites;
SYSCTL_LONG(_vfs, OID_AUTO, barrierwrites, CTLFLAG_RW, &barrierwrites, 0,
"Number of barrier writes");
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
SYSCTL_INT(_vfs, OID_AUTO, unmapped_buf_allowed, CTLFLAG_RD,
&unmapped_buf_allowed, 0,
"Permit the use of the unmapped i/o");
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
/*
* Lock for the non-dirty bufqueues
*/
static struct mtx_padalign bqclean;
/*
* Lock for the dirty queue.
*/
static struct mtx_padalign bqdirty;
/*
* This lock synchronizes access to bd_request.
*/
static struct mtx_padalign bdlock;
/*
* This lock protects the runningbufreq and synchronizes runningbufwakeup and
* waitrunningbufspace().
*/
static struct mtx_padalign rbreqlock;
/*
* Lock that protects needsbuffer and the sleeps/wakeups surrounding it.
*/
static struct mtx_padalign nblock;
/*
* Lock that protects bdirtywait.
*/
static struct mtx_padalign bdirtylock;
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
/*
* Wakeup point for bufdaemon, as well as indicator of whether it is already
* active. Set to 1 when the bufdaemon is already "on" the queue, 0 when it
* is idling.
*/
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
static int bd_request;
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
/*
* Request for the buf daemon to write more buffers than is indicated by
* lodirtybuf. This may be necessary to push out excess dependencies or
* defragment the address space where a simple count of the number of dirty
* buffers is insufficient to characterize the demand for flushing them.
*/
static int bd_speedupreq;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
/*
* bogus page -- for I/O to/from partially complete buffers
Only do object paging_in_progress wakeups if someone is waiting on this condition. Added some comments. Submitted by: John Dyson
1995-02-22 09:16:07 +00:00
* this is a temporary solution to the problem, but it is not
* really that bad. it would be better to split the buffer
* for input in the case of buffers partially already in memory,
* but the code is intricate enough already.
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
*/
vm_page_t bogus_page;
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
/*
* Synchronization (sleep/wakeup) variable for active buffer space requests.
* Set when wait starts, cleared prior to wakeup().
* Used in runningbufwakeup() and waitrunningbufspace().
*/
static int runningbufreq;
/*
* Synchronization (sleep/wakeup) variable for buffer requests.
* Can contain the VFS_BIO_NEED flags defined below; setting/clearing is done
* by and/or.
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
* Used in numdirtywakeup(), bufspacewakeup(), bufcountadd(), bwillwrite(),
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
* getnewbuf(), and getblk().
*/
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
static int needsbuffer;
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
/*
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
* Synchronization for bwillwrite() waiters.
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
*/
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
static int bdirtywait;
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
* Move bswlist declaration and initialization from kern/vfs_bio.c to vm/vm_pager.c, which is the only place it is used. * Make the QUEUE_* definitions and bufqueues local to vfs_bio.c. * constify buf_wmesg.
2002-03-05 18:20:58 +00:00
/*
* Definitions for the buffer free lists.
*/
Remove the support for using non-mpsafe filesystem modules. In particular, do not lock Giant conditionally when calling into the filesystem module, remove the VFS_LOCK_GIANT() and related macros. Stop handling buffers belonging to non-mpsafe filesystems. The VFS_VERSION is bumped to indicate the interface change which does not result in the interface signatures changes. Conducted and reviewed by: attilio Tested by: pho
2012-10-22 17:50:54 +00:00
#define BUFFER_QUEUES 5 /* number of free buffer queues */
* Move bswlist declaration and initialization from kern/vfs_bio.c to vm/vm_pager.c, which is the only place it is used. * Make the QUEUE_* definitions and bufqueues local to vfs_bio.c. * constify buf_wmesg.
2002-03-05 18:20:58 +00:00
#define QUEUE_NONE 0 /* on no queue */
- Move BX_BKGRDWAIT and BX_BKGRDINPROG to BV_ and the b_vflags field. - Surround all accesses of the BKGRD{WAIT,INPROG} flags with the vnode interlock. - Don't use the B_LOCKED flag and QUEUE_LOCKED for background write buffers. Check for the BKGRDINPROG flag before recycling or throwing away a buffer. We do this instead because it is not safe for us to move the original buffer to a new queue from the callback on the background write buffer. - Remove the B_LOCKED flag and the locked buffer queue. They are no longer used. - The vnode interlock is used around checks for BKGRDINPROG where it may not be strictly necessary. If we hold the buf lock the a back-ground write will not be started without our knowledge, one may only be completed while we're not looking. Rather than remove the code, Document two of the places where this extra locking is done. A pass should be done to verify and minimize the locking later.
2003-08-28 06:55:18 +00:00
#define QUEUE_CLEAN 1 /* non-B_DELWRI buffers */
#define QUEUE_DIRTY 2 /* B_DELWRI buffers */
Remove the support for using non-mpsafe filesystem modules. In particular, do not lock Giant conditionally when calling into the filesystem module, remove the VFS_LOCK_GIANT() and related macros. Stop handling buffers belonging to non-mpsafe filesystems. The VFS_VERSION is bumped to indicate the interface change which does not result in the interface signatures changes. Conducted and reviewed by: attilio Tested by: pho
2012-10-22 17:50:54 +00:00
#define QUEUE_EMPTYKVA 3 /* empty buffer headers w/KVA assignment */
#define QUEUE_EMPTY 4 /* empty buffer headers */
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
#define QUEUE_SENTINEL 1024 /* not an queue index, but mark for sentinel */
* Move bswlist declaration and initialization from kern/vfs_bio.c to vm/vm_pager.c, which is the only place it is used. * Make the QUEUE_* definitions and bufqueues local to vfs_bio.c. * constify buf_wmesg.
2002-03-05 18:20:58 +00:00
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
/* Queues for free buffers with various properties */
* Move bswlist declaration and initialization from kern/vfs_bio.c to vm/vm_pager.c, which is the only place it is used. * Make the QUEUE_* definitions and bufqueues local to vfs_bio.c. * constify buf_wmesg.
2002-03-05 18:20:58 +00:00
static TAILQ_HEAD(bqueues, buf) bufqueues[BUFFER_QUEUES] = { { 0 } };
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
#ifdef INVARIANTS
static int bq_len[BUFFER_QUEUES];
#endif
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
/*
* Single global constant for BUF_WMESG, to avoid getting multiple references.
* buf_wmesg is referred from macros.
*/
* Move bswlist declaration and initialization from kern/vfs_bio.c to vm/vm_pager.c, which is the only place it is used. * Make the QUEUE_* definitions and bufqueues local to vfs_bio.c. * constify buf_wmesg.
2002-03-05 18:20:58 +00:00
const char *buf_wmesg = BUF_WMESG;
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
#define VFS_BIO_NEED_ANY 0x01 /* any freeable buffer */
#define VFS_BIO_NEED_FREE 0x04 /* wait for free bufs, hi hysteresis */
#define VFS_BIO_NEED_BUFSPACE 0x08 /* wait for buf space, lo hysteresis */
Don't allow vfs.lorunningspace or vfs.hirunningspace to be set such that lorunningspace is greater than hirunningspace as the system performs terribly if it is mistuned in this fashion. MFC after: 1 week
2013-11-15 15:29:53 +00:00
static int
sysctl_runningspace(SYSCTL_HANDLER_ARGS)
{
long value;
int error;
value = *(long *)arg1;
error = sysctl_handle_long(oidp, &value, 0, req);
if (error != 0 || req->newptr == NULL)
return (error);
mtx_lock(&rbreqlock);
if (arg1 == &hirunningspace) {
if (value < lorunningspace)
error = EINVAL;
else
hirunningspace = value;
} else {
KASSERT(arg1 == &lorunningspace,
("%s: unknown arg1", __func__));
if (value > hirunningspace)
error = EINVAL;
else
lorunningspace = value;
}
mtx_unlock(&rbreqlock);
return (error);
}
Add an ABI compat shim for the vfs.bufspace sysctl for sysctl requests that try to fetch it as an int rather than a long. If the current value is greater than INT_MAX it reports a value of INT_MAX.
2009-03-10 15:26:50 +00:00
#if defined(COMPAT_FREEBSD4) || defined(COMPAT_FREEBSD5) || \
defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD7)
static int
sysctl_bufspace(SYSCTL_HANDLER_ARGS)
{
long lvalue;
int ivalue;
Only use the ABI compat shim for vfs.bufspace if the old buffer is smaller than a long. PR: amd64/134786 Submitted by: Emil Mikulic emikulic| gmail MFC after: 3 days
2009-05-21 16:18:45 +00:00
if (sizeof(int) == sizeof(long) || req->oldlen >= sizeof(long))
Add an ABI compat shim for the vfs.bufspace sysctl for sysctl requests that try to fetch it as an int rather than a long. If the current value is greater than INT_MAX it reports a value of INT_MAX.
2009-03-10 15:26:50 +00:00
return (sysctl_handle_long(oidp, arg1, arg2, req));
lvalue = *(long *)arg1;
In the ABI shim for vfs.bufspace, rather than truncating values larger than INT_MAX to INT_MAX, just go ahead and write out the full long to give an error of ENOMEM to the user process. Requested by: bde
2009-03-10 21:27:15 +00:00
if (lvalue > INT_MAX)
/* On overflow, still write out a long to trigger ENOMEM. */
return (sysctl_handle_long(oidp, &lvalue, 0, req));
ivalue = lvalue;
Add an ABI compat shim for the vfs.bufspace sysctl for sysctl requests that try to fetch it as an int rather than a long. If the current value is greater than INT_MAX it reports a value of INT_MAX.
2009-03-10 15:26:50 +00:00
return (sysctl_handle_int(oidp, &ivalue, 0, req));
}
#endif
Add support for reading directly from file to userland buffer when the O_DIRECT descriptor status flag is set and both offset and length is a multiple of the physical media sector size.
2003-03-26 23:40:42 +00:00
#ifdef DIRECTIO
extern void ffs_rawread_setup(void);
#endif /* DIRECTIO */
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
/*
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
* bqlock:
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
*
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
* Return the appropriate queue lock based on the index.
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
*/
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
static inline struct mtx *
bqlock(int qindex)
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
{
stylistic polishing.
2004-09-15 20:54:23 +00:00
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
if (qindex == QUEUE_DIRTY)
return (struct mtx *)(&bqdirty);
return (struct mtx *)(&bqclean);
}
/*
* bdirtywakeup:
*
* Wakeup any bwillwrite() waiters.
*/
static void
bdirtywakeup(void)
{
mtx_lock(&bdirtylock);
if (bdirtywait) {
bdirtywait = 0;
wakeup(&bdirtywait);
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
}
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_unlock(&bdirtylock);
}
/*
* bdirtysub:
*
* Decrement the numdirtybuffers count by one and wakeup any
* threads blocked in bwillwrite().
*/
static void
bdirtysub(void)
{
if (atomic_fetchadd_int(&numdirtybuffers, -1) ==
(lodirtybuffers + hidirtybuffers) / 2)
bdirtywakeup();
}
/*
* bdirtyadd:
*
* Increment the numdirtybuffers count by one and wakeup the buf
* daemon if needed.
*/
static void
bdirtyadd(void)
{
/*
* Only do the wakeup once as we cross the boundary. The
* buf daemon will keep running until the condition clears.
*/
if (atomic_fetchadd_int(&numdirtybuffers, 1) ==
(lodirtybuffers + hidirtybuffers) / 2)
bd_wakeup();
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
}
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
/*
* bufspacewakeup:
*
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
* Called when buffer space is potentially available for recovery.
* getnewbuf() will block on this flag when it is unable to free
* sufficient buffer space. Buffer space becomes recoverable when
* bp's get placed back in the queues.
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
*/
static __inline void
bufspacewakeup(void)
{
stylistic polishing.
2004-09-15 20:54:23 +00:00
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
/*
* If someone is waiting for BUF space, wake them up. Even
* though we haven't freed the kva space yet, the waiting
* process will be able to now.
*/
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
mtx_lock(&nblock);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
if (needsbuffer & VFS_BIO_NEED_BUFSPACE) {
needsbuffer &= ~VFS_BIO_NEED_BUFSPACE;
wakeup(&needsbuffer);
}
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
mtx_unlock(&nblock);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
}
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
/*
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
* runningwakeup:
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
*
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
* Wake up processes that are waiting on asynchronous writes to fall
* below lorunningspace.
*/
static void
runningwakeup(void)
{
mtx_lock(&rbreqlock);
if (runningbufreq) {
runningbufreq = 0;
wakeup(&runningbufreq);
}
mtx_unlock(&rbreqlock);
}
/*
* runningbufwakeup:
*
* Decrement the outstanding write count according.
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
*/
Un-staticize runningbufwakeup() and staticize updateproc. Add a new private thread flag to indicate that the thread should not sleep if runningbufspace is too large. Set this flag on the bufdaemon and syncer threads so that they skip the waitrunningbufspace() call in bufwrite() rather than than checking the proc pointer vs. the known proc pointers for these two threads. A way of preventing these threads from being starved for I/O but still placing limits on their outstanding I/O would be desirable. Set this flag in ffs_copyonwrite() to prevent bufwrite() calls from blocking on the runningbufspace check while holding snaplk. This prevents snaplk from being held for an arbitrarily long period of time if runningbufspace is high and greatly reduces the contention for snaplk. The disadvantage is that ffs_copyonwrite() can start a large amount of I/O if there are a large number of snapshots, which could cause a deadlock in other parts of the code. Call runningbufwakeup() in ffs_copyonwrite() to decrement runningbufspace before attempting to grab snaplk so that I/O requests waiting on snaplk are not counted in runningbufspace as being in-progress. Increment runningbufspace again before actually launching the original I/O request. Prior to the above two changes, the system could deadlock if enough I/O requests were blocked by snaplk to prevent runningbufspace from falling below lorunningspace and one of the bawrite() calls in ffs_copyonwrite() blocked in waitrunningbufspace() while holding snaplk. See <http://www.holm.cc/stress/log/cons143.html>
2005-09-30 01:30:01 +00:00
void
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
runningbufwakeup(struct buf *bp)
{
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
long space, bspace;
stylistic polishing.
2004-09-15 20:54:23 +00:00
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
bspace = bp->b_runningbufspace;
Assert that runningbufspace does not underflow. Sponsored by: The FreeBSD Foundation
2013-07-13 19:36:18 +00:00
if (bspace == 0)
return;
space = atomic_fetchadd_long(&runningbufspace, -bspace);
KASSERT(space >= bspace, ("runningbufspace underflow %ld %ld",
space, bspace));
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
bp->b_runningbufspace = 0;
/*
* Only acquire the lock and wakeup on the transition from exceeding
* the threshold to falling below it.
*/
if (space < lorunningspace)
return;
if (space - bspace > lorunningspace)
return;
runningwakeup();
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
}
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
/*
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
* bufcountadd:
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
*
* Called when a buffer has been added to one of the free queues to
* account for the buffer and to wakeup anyone waiting for free buffers.
* This typically occurs when large amounts of metadata are being handled
* by the buffer cache ( else buffer space runs out first, usually ).
*/
static __inline void
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
bufcountadd(struct buf *bp)
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
{
Add INVARIANTS checking that numfreebufs values are sane. Also add a per-buf flag to catch if a buf is double-counted in the free count. This code was useful to debug an instance where a local patch at Isilon was incorrectly managing numfreebufs for a new buf state. Reviewed by: jeff Approved by: zml (mentor)
2010-06-11 17:03:26 +00:00
int old;
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
KASSERT((bp->b_flags & B_INFREECNT) == 0,
Add INVARIANTS checking that numfreebufs values are sane. Also add a per-buf flag to catch if a buf is double-counted in the free count. This code was useful to debug an instance where a local patch at Isilon was incorrectly managing numfreebufs for a new buf state. Reviewed by: jeff Approved by: zml (mentor)
2010-06-11 17:03:26 +00:00
("buf %p already counted as free", bp));
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
bp->b_flags |= B_INFREECNT;
Add INVARIANTS checking that numfreebufs values are sane. Also add a per-buf flag to catch if a buf is double-counted in the free count. This code was useful to debug an instance where a local patch at Isilon was incorrectly managing numfreebufs for a new buf state. Reviewed by: jeff Approved by: zml (mentor)
2010-06-11 17:03:26 +00:00
old = atomic_fetchadd_int(&numfreebuffers, 1);
KASSERT(old >= 0 && old < nbuf,
("numfreebuffers climbed to %d", old + 1));
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
mtx_lock(&nblock);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
if (needsbuffer) {
needsbuffer &= ~VFS_BIO_NEED_ANY;
if (numfreebuffers >= hifreebuffers)
needsbuffer &= ~VFS_BIO_NEED_FREE;
wakeup(&needsbuffer);
}
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
mtx_unlock(&nblock);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
}
Changes to support 1Tb filesizes. Pages are now named by an (object,index) pair instead of (object,offset) pair.
1995-12-11 04:58:34 +00:00
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
/*
* bufcountsub:
*
* Decrement the numfreebuffers count as needed.
*/
static void
bufcountsub(struct buf *bp)
{
int old;
/*
* Fixup numfreebuffers count. If the buffer is invalid or not
* delayed-write, the buffer was free and we must decrement
* numfreebuffers.
*/
if ((bp->b_flags & B_INVAL) || (bp->b_flags & B_DELWRI) == 0) {
KASSERT((bp->b_flags & B_INFREECNT) != 0,
("buf %p not counted in numfreebuffers", bp));
bp->b_flags &= ~B_INFREECNT;
old = atomic_fetchadd_int(&numfreebuffers, -1);
KASSERT(old > 0, ("numfreebuffers dropped to %d", old - 1));
}
}
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
/*
* waitrunningbufspace()
*
* runningbufspace is a measure of the amount of I/O currently
* running. This routine is used in async-write situations to
* prevent creating huge backups of pending writes to a device.
* Only asynchronous writes are governed by this function.
*
* This does NOT turn an async write into a sync write. It waits
* for earlier writes to complete and generally returns before the
* caller's write has reached the device.
*/
Un-staticize waitrunningbufspace() and call it before returning from ffs_copyonwrite() if any async writes were launched. Restore the threads previous TDP_NORUNNINGBUF state before returning from ffs_copyonwrite().
2005-09-30 18:07:41 +00:00
void
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
waitrunningbufspace(void)
{
stylistic polishing.
2004-09-15 20:54:23 +00:00
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
mtx_lock(&rbreqlock);
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
while (runningbufspace > hirunningspace) {
There is no need to count waiters for the runningbufspace. Sponsored by: The FreeBSD Foundation
2013-07-13 19:34:34 +00:00
runningbufreq = 1;
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
msleep(&runningbufreq, &rbreqlock, PVM, "wdrain", 0);
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
}
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
mtx_unlock(&rbreqlock);
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
}
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* vfs_buf_test_cache:
*
* Called when a buffer is extended. This function clears the B_CACHE
* bit if the newly extended portion of the buffer does not contain
* valid data.
*/
Consistently use __inline instead of __inline__ as the former is an empty macro in <sys/cdefs.h> for compilers without support for inline.
2004-07-04 16:11:03 +00:00
static __inline
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
void
vfs_buf_test_cache(struct buf *bp,
vm_ooffset_t foff, vm_offset_t off, vm_offset_t size,
vm_page_t m)
{
stylistic polishing.
2004-09-15 20:54:23 +00:00
The soft and hard busy mechanism rely on the vm object lock to work. Unify the 2 concept into a real, minimal, sxlock where the shared acquisition represent the soft busy and the exclusive acquisition represent the hard busy. The old VPO_WANTED mechanism becames the hard-path for this new lock and it becomes per-page rather than per-object. The vm_object lock becames an interlock for this functionality: it can be held in both read or write mode. However, if the vm_object lock is held in read mode while acquiring or releasing the busy state, the thread owner cannot make any assumption on the busy state unless it is also busying it. Also: - Add a new flag to directly shared busy pages while vm_page_alloc and vm_page_grab are being executed. This will be very helpful once these functions happen under a read object lock. - Move the swapping sleep into its own per-object flag The KPI is heavilly changed this is why the version is bumped. It is very likely that some VM ports users will need to change their own code. Sponsored by: EMC / Isilon storage division Discussed with: alc Reviewed by: jeff, kib Tested by: gavin, bapt (older version) Tested by: pho, scottl
2013-08-09 11:11:11 +00:00
VM_OBJECT_ASSERT_LOCKED(m->object);
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
if (bp->b_flags & B_CACHE) {
int base = (foff + off) & PAGE_MASK;
if (vm_page_is_valid(m, base, size) == 0)
bp->b_flags &= ~B_CACHE;
}
}
Correct a comment typo
2007-03-25 10:07:23 +00:00
/* Wake up the buffer daemon if necessary */
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
static __inline void
bd_wakeup(void)
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
{
stylistic polishing.
2004-09-15 20:54:23 +00:00
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
mtx_lock(&bdlock);
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
if (bd_request == 0) {
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
bd_request = 1;
wakeup(&bd_request);
}
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
mtx_unlock(&bdlock);
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
}
Reimplement buf_daemon / getnewbuf() interaction for dealing with stressful situations. buf_daemon now makes a distinction between being woken up and its sleep timing out, and as a consequence is now much better able to dynamically tune itself to its environment. Reviewed by: Alfred Perlstein <bright@wintelcom.net>
1999-12-20 20:28:40 +00:00
/*
* bd_speedup - speedup the buffer cache flushing code
*/
void
bd_speedup(void)
{
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
int needwake;
stylistic polishing.
2004-09-15 20:54:23 +00:00
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
mtx_lock(&bdlock);
needwake = 0;
if (bd_speedupreq == 0 || bd_request == 0)
needwake = 1;
bd_speedupreq = 1;
bd_request = 1;
if (needwake)
wakeup(&bd_request);
mtx_unlock(&bdlock);
Reimplement buf_daemon / getnewbuf() interaction for dealing with stressful situations. buf_daemon now makes a distinction between being woken up and its sleep timing out, and as a consequence is now much better able to dynamically tune itself to its environment. Reviewed by: Alfred Perlstein <bright@wintelcom.net>
1999-12-20 20:28:40 +00:00
}
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
On i386, double the default size of the bio transient map. With the maxbcache size fixed, the auto-tuned transient map is too small for real-world load on i386. Tested by: David Wolfskill Sponsored by: The FreeBSD Foundation
2013-03-27 10:56:15 +00:00
#ifdef __i386__
#define TRANSIENT_DENOM 5
#else
#define TRANSIENT_DENOM 10
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
Move most of the kernel submap initialization code, including the timeout callwheel and buffer cache, out of the platform specific areas and into the machine independant area. i386 and alpha adjusted here. Other cpus can be fixed piecemeal. Reviewed by: freebsd-smp, jake
2001-08-22 04:07:27 +00:00
* Calculating buffer cache scaling values and reserve space for buffer
* headers. This is called during low level kernel initialization and
* may be called more then once. We CANNOT write to the memory area
* being reserved at this time.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
bufhashinit() is called with a caddr_t and is expected to return the same in both the alpha and i386 ports.
1999-07-09 16:41:19 +00:00
caddr_t
Change hw.physmem and hw.usermem to unsigned long like they used to be in the original hardwired sysctl implementation. The buf size calculator still overflows an integer on machines with large KVA (eg: ia64) where the number of pages does not fit into an int. Use 'long' there. Change Maxmem and physmem and related variables to 'long', mostly for completeness. Machines are not likely to overflow 'int' pages in the near term, but then again, 640K ought to be enough for anybody. This comes for free on 32 bit machines, so why not?
2002-08-30 04:04:37 +00:00
kern_vfs_bio_buffer_alloc(caddr_t v, long physmem_est)
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
{
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
int tuned_nbuf;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
long maxbuf, maxbuf_sz, buf_sz, biotmap_sz;
stylistic polishing.
2004-09-15 20:54:23 +00:00
The nbuf calculation was assuming that PAGE_SIZE = 4096 bytes, which is bogus. The calculation has been adjusted to use units of kilobytes. Noticed by: Chad David <davidc@acns.ab.ca> MFC after: 1 week
2001-12-08 20:37:08 +00:00
/*
* physmem_est is in pages. Convert it to kilobytes (assumes
* PAGE_SIZE is >= 1K)
*/
physmem_est = physmem_est * (PAGE_SIZE / 1024);
Move most of the kernel submap initialization code, including the timeout callwheel and buffer cache, out of the platform specific areas and into the machine independant area. i386 and alpha adjusted here. Other cpus can be fixed piecemeal. Reviewed by: freebsd-smp, jake
2001-08-22 04:07:27 +00:00
/*
* The nominal buffer size (and minimum KVA allocation) is BKVASIZE.
* For the first 64MB of ram nominally allocate sufficient buffers to
* cover 1/4 of our ram. Beyond the first 64MB allocate additional
Fix the description of the formula used to autosize the number of buffers in the buffer cache. Approved by: re (kensmith)
2007-09-26 11:22:23 +00:00
* buffers to cover 1/10 of our ram over 64MB. When auto-sizing
Move most of the kernel submap initialization code, including the timeout callwheel and buffer cache, out of the platform specific areas and into the machine independant area. i386 and alpha adjusted here. Other cpus can be fixed piecemeal. Reviewed by: freebsd-smp, jake
2001-08-22 04:07:27 +00:00
* the buffer cache we limit the eventual kva reservation to
* maxbcache bytes.
*
* factor represents the 1/4 x ram conversion.
*/
if (nbuf == 0) {
The nbuf calculation was assuming that PAGE_SIZE = 4096 bytes, which is bogus. The calculation has been adjusted to use units of kilobytes. Noticed by: Chad David <davidc@acns.ab.ca> MFC after: 1 week
2001-12-08 20:37:08 +00:00
int factor = 4 * BKVASIZE / 1024;
Move most of the kernel submap initialization code, including the timeout callwheel and buffer cache, out of the platform specific areas and into the machine independant area. i386 and alpha adjusted here. Other cpus can be fixed piecemeal. Reviewed by: freebsd-smp, jake
2001-08-22 04:07:27 +00:00
nbuf = 50;
The nbuf calculation was assuming that PAGE_SIZE = 4096 bytes, which is bogus. The calculation has been adjusted to use units of kilobytes. Noticed by: Chad David <davidc@acns.ab.ca> MFC after: 1 week
2001-12-08 20:37:08 +00:00
if (physmem_est > 4096)
nbuf += min((physmem_est - 4096) / factor,
65536 / factor);
if (physmem_est > 65536)
When auto-sizing the buffer cache, limit the amount of physical memory used as the estimation of size, to 32GB. This provides around 100K of buffer headers and corresponding KVA for buffer map at the peak. Sizing the cache larger is not useful, also resulting in the wasting and exhausting of KVA for large machines. Reported and tested by: bdrewery Sponsored by: The FreeBSD Foundation
2013-06-03 04:16:48 +00:00
nbuf += min((physmem_est - 65536) * 2 / (factor * 5),
32 * 1024 * 1024 / (factor * 5));
Move most of the kernel submap initialization code, including the timeout callwheel and buffer cache, out of the platform specific areas and into the machine independant area. i386 and alpha adjusted here. Other cpus can be fixed piecemeal. Reviewed by: freebsd-smp, jake
2001-08-22 04:07:27 +00:00
if (maxbcache && nbuf > maxbcache / BKVASIZE)
nbuf = maxbcache / BKVASIZE;
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
tuned_nbuf = 1;
} else
tuned_nbuf = 0;
/* XXX Avoid unsigned long overflows later on with maxbufspace. */
maxbuf = (LONG_MAX / 3) / BKVASIZE;
if (nbuf > maxbuf) {
if (!tuned_nbuf)
printf("Warning: nbufs lowered from %d to %ld\n", nbuf,
maxbuf);
nbuf = maxbuf;
Move most of the kernel submap initialization code, including the timeout callwheel and buffer cache, out of the platform specific areas and into the machine independant area. i386 and alpha adjusted here. Other cpus can be fixed piecemeal. Reviewed by: freebsd-smp, jake
2001-08-22 04:07:27 +00:00
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
/*
Fix a typo.
2014-01-21 03:24:52 +00:00
* Ideal allocation size for the transient bio submap is 10%
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
* of the maximal space buffer map. This roughly corresponds
* to the amount of the buffer mapped for typical UFS load.
*
* Clip the buffer map to reserve space for the transient
On i386, double the default size of the bio transient map. With the maxbcache size fixed, the auto-tuned transient map is too small for real-world load on i386. Tested by: David Wolfskill Sponsored by: The FreeBSD Foundation
2013-03-27 10:56:15 +00:00
* BIOs, if its extent is bigger than 90% (80% on i386) of the
* maximum buffer map extent on the platform.
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
*
* The fall-back to the maxbuf in case of maxbcache unset,
* allows to not trim the buffer KVA for the architectures
* with ample KVA space.
*/
Only size and create the bio_transient_map when unmapped buffers are enabled. Now, disabling the unmapped buffers should result in the kernel memory map identical to pre-r248550. Sponsored by: The FreeBSD Foundation
2013-03-21 07:28:15 +00:00
if (bio_transient_maxcnt == 0 && unmapped_buf_allowed) {
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
maxbuf_sz = maxbcache != 0 ? maxbcache : maxbuf * BKVASIZE;
buf_sz = (long)nbuf * BKVASIZE;
On i386, double the default size of the bio transient map. With the maxbcache size fixed, the auto-tuned transient map is too small for real-world load on i386. Tested by: David Wolfskill Sponsored by: The FreeBSD Foundation
2013-03-27 10:56:15 +00:00
if (buf_sz < maxbuf_sz / TRANSIENT_DENOM *
(TRANSIENT_DENOM - 1)) {
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
/*
* There is more KVA than memory. Do not
* adjust buffer map size, and assign the rest
* of maxbuf to transient map.
*/
biotmap_sz = maxbuf_sz - buf_sz;
} else {
/*
* Buffer map spans all KVA we could afford on
On i386, double the default size of the bio transient map. With the maxbcache size fixed, the auto-tuned transient map is too small for real-world load on i386. Tested by: David Wolfskill Sponsored by: The FreeBSD Foundation
2013-03-27 10:56:15 +00:00
* this platform. Give 10% (20% on i386) of
* the buffer map to the transient bio map.
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
*/
On i386, double the default size of the bio transient map. With the maxbcache size fixed, the auto-tuned transient map is too small for real-world load on i386. Tested by: David Wolfskill Sponsored by: The FreeBSD Foundation
2013-03-27 10:56:15 +00:00
biotmap_sz = buf_sz / TRANSIENT_DENOM;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
buf_sz -= biotmap_sz;
}
if (biotmap_sz / INT_MAX > MAXPHYS)
bio_transient_maxcnt = INT_MAX;
else
bio_transient_maxcnt = biotmap_sz / MAXPHYS;
/*
* Artifically limit to 1024 simultaneous in-flight I/Os
* using the transient mapping.
*/
if (bio_transient_maxcnt > 1024)
bio_transient_maxcnt = 1024;
if (tuned_nbuf)
nbuf = buf_sz / BKVASIZE;
}
Move most of the kernel submap initialization code, including the timeout callwheel and buffer cache, out of the platform specific areas and into the machine independant area. i386 and alpha adjusted here. Other cpus can be fixed piecemeal. Reviewed by: freebsd-smp, jake
2001-08-22 04:07:27 +00:00
/*
* swbufs are used as temporary holders for I/O, such as paging I/O.
* We have no less then 16 and no more then 256.
*/
nswbuf = max(min(nbuf/4, 256), 16);
Add support for reading directly from file to userland buffer when the O_DIRECT descriptor status flag is set and both offset and length is a multiple of the physical media sector size.
2003-03-26 23:40:42 +00:00
#ifdef NSWBUF_MIN
if (nswbuf < NSWBUF_MIN)
nswbuf = NSWBUF_MIN;
#endif
#ifdef DIRECTIO
ffs_rawread_setup();
#endif
Move most of the kernel submap initialization code, including the timeout callwheel and buffer cache, out of the platform specific areas and into the machine independant area. i386 and alpha adjusted here. Other cpus can be fixed piecemeal. Reviewed by: freebsd-smp, jake
2001-08-22 04:07:27 +00:00
/*
* Reserve space for the buffer cache buffers
*/
swbuf = (void *)v;
v = (caddr_t)(swbuf + nswbuf);
buf = (void *)v;
v = (caddr_t)(buf + nbuf);
return(v);
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
}
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
/* Initialize the buffer subsystem. Called before use of any buffers. */
While in the real world, I had a bad case of being swapped out for a lot of cycles. While waiting there I added a lot of the extra ()'s I have, (I have never used LISP to any extent). So I compiled the kernel with -Wall and shut up a lot of "suggest you add ()'s", removed a bunch of unused var's and added a couple of declarations here and there. Having a lap-top is highly recommended. My kernel still runs, yell at me if you kernel breaks.
1994-09-25 19:34:02 +00:00
void
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
bufinit(void)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
struct buf *bp;
int i;
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_init(&bqclean, "bufq clean lock", NULL, MTX_DEF);
mtx_init(&bqdirty, "bufq dirty lock", NULL, MTX_DEF);
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
mtx_init(&rbreqlock, "runningbufspace lock", NULL, MTX_DEF);
mtx_init(&nblock, "needsbuffer lock", NULL, MTX_DEF);
mtx_init(&bdlock, "buffer daemon lock", NULL, MTX_DEF);
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_init(&bdirtylock, "dirty buf lock", NULL, MTX_DEF);
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/* next, make a null set of free lists */
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
for (i = 0; i < BUFFER_QUEUES; i++)
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
TAILQ_INIT(&bufqueues[i]);
/* finally, initialize each buffer header and stick on empty q */
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
for (i = 0; i < nbuf; i++) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bp = &buf[i];
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
bzero(bp, sizeof *bp);
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
bp->b_flags = B_INVAL | B_INFREECNT;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bp->b_rcred = NOCRED;
bp->b_wcred = NOCRED;
Moved header definitions to buf.h, and added missing splx() - found by Johannes Helander.
1994-05-26 08:45:29 +00:00
bp->b_qindex = QUEUE_EMPTY;
Use TAILQ macros for clean/dirty block list processing. Set b_xflags rather than abusing the list next pointer with a magic number.
1998-10-31 15:31:29 +00:00
bp->b_xflags = 0;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
LIST_INIT(&bp->b_dep);
Convert buffer locking from using the B_BUSY and B_WANTED flags to using lockmgr locks. This commit should be functionally equivalent to the old semantics. That is, all buffer locking is done with LK_EXCLUSIVE requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will be done in future commits.
1999-06-26 02:47:16 +00:00
BUF_LOCKINIT(bp);
Moved header definitions to buf.h, and added missing splx() - found by Johannes Helander.
1994-05-26 08:45:29 +00:00
TAILQ_INSERT_TAIL(&bufqueues[QUEUE_EMPTY], bp, b_freelist);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
#ifdef INVARIANTS
bq_len[QUEUE_EMPTY]++;
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
/*
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
* maxbufspace is the absolute maximum amount of buffer space we are
* allowed to reserve in KVM and in real terms. The absolute maximum
* is nominally used by buf_daemon. hibufspace is the nominal maximum
* used by most other processes. The differential is required to
* ensure that buf_daemon is able to run when other processes might
* be blocked waiting for buffer space.
*
* maxbufspace is based on BKVASIZE. Allocating buffers larger then
* this may result in KVM fragmentation which is not handled optimally
* by the system.
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
*/
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
maxbufspace = (long)nbuf * BKVASIZE;
hibufspace = lmax(3 * maxbufspace / 4, maxbufspace - MAXBSIZE * 10);
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
lobufspace = hibufspace - MAXBSIZE;
Make lorunningspace catch up with hirunningspace. While there, add comment about the magic numbers. Prodded by: alc
2010-07-23 12:30:29 +00:00
/*
Reduce the difference between hirunningspace and lorunningspace, it should help interactivity in edge cases.
2010-10-25 14:05:25 +00:00
* Note: The 16 MiB upper limit for hirunningspace was chosen
Elaborate on how hirunningspace was chosen.
2010-08-09 22:22:46 +00:00
* arbitrarily and may need further tuning. It corresponds to
* 128 outstanding write IO requests (if IO size is 128 KiB),
Fix (hopefully) the spelling of "queuing." Submitted by: bf1783 at gmail com
2010-08-09 23:32:37 +00:00
* which fits with many RAID controllers' tagged queuing limits.
Reduce the difference between hirunningspace and lorunningspace, it should help interactivity in edge cases.
2010-10-25 14:05:25 +00:00
* The lower 1 MiB limit is the historical upper limit for
Elaborate on how hirunningspace was chosen.
2010-08-09 22:22:46 +00:00
* hirunningspace.
Make lorunningspace catch up with hirunningspace. While there, add comment about the magic numbers. Prodded by: alc
2010-07-23 12:30:29 +00:00
*/
Fix expression style. Prodded by: jhb
2010-07-20 13:59:51 +00:00
hirunningspace = lmax(lmin(roundup(hibufspace / 64, MAXBSIZE),
16 * 1024 * 1024), 1024 * 1024);
Reduce the difference between hirunningspace and lorunningspace, it should help interactivity in edge cases.
2010-10-25 14:05:25 +00:00
lorunningspace = roundup((hirunningspace * 2) / 3, MAXBSIZE);
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
1) Fix a bug that a buffer is removed from a queue, but the queue type is not set to QUEUE_NONE. This appears to have caused a hang bug that has been lurking. 2) Fix bugs that brelse'ing locked buffers do not "free" them, but the code assumes so. This can cause hangs when LFS is used. 3) Use malloced memory for directories when applicable. The amount of malloced memory is seriously limited, but should decrease the amount of memory used by an average directory to 1/4 - 1/2 previous. This capability is fully tunable. (Note that there is no config parameter, and might never be.) 4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since the data in VMIO buffers is not lost when the buffer is reclaimed, this will help performance. This is adjustable also.
1996-03-02 04:40:56 +00:00
/*
* Limit the amount of malloc memory since it is wired permanently into
* the kernel space. Even though this is accounted for in the buffer
* allocation, we don't want the malloced region to grow uncontrolled.
* The malloc scheme improves memory utilization significantly on average
* (small) directories.
*/
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
maxbufmallocspace = hibufspace / 20;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
Fix a problem with the VN device. Specifically, the VN device can cause a problem of spiraling death due to buffer resource limitations. The vfs_bio code in general had little ability to handle buffer resource management, and now it does. Also, there are a lot more knobs for tuning the vfs_bio code now. The knobs came free because of the need that there always be some immediately available buffers (non-delayed or locked) for use. Note that the buffer cache code is much less likely to get bogged down with lots of delayed writes, even more so than before.
1997-06-15 17:56:53 +00:00
/*
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
* Reduce the chance of a deadlock occuring by limiting the number
* of delayed-write dirty buffers we allow to stack up.
Fix a problem with the VN device. Specifically, the VN device can cause a problem of spiraling death due to buffer resource limitations. The vfs_bio code in general had little ability to handle buffer resource management, and now it does. Also, there are a lot more knobs for tuning the vfs_bio code now. The knobs came free because of the need that there always be some immediately available buffers (non-delayed or locked) for use. Note that the buffer cache code is much less likely to get bogged down with lots of delayed writes, even more so than before.
1997-06-15 17:56:53 +00:00
*/
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
hidirtybuffers = nbuf / 4 + 20;
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
dirtybufthresh = hidirtybuffers * 9 / 10;
Fix a problem with the VN device. Specifically, the VN device can cause a problem of spiraling death due to buffer resource limitations. The vfs_bio code in general had little ability to handle buffer resource management, and now it does. Also, there are a lot more knobs for tuning the vfs_bio code now. The knobs came free because of the need that there always be some immediately available buffers (non-delayed or locked) for use. Note that the buffer cache code is much less likely to get bogged down with lots of delayed writes, even more so than before.
1997-06-15 17:56:53 +00:00
numdirtybuffers = 0;
Adjust the buffer cache to better handle small-memory machines. A slightly older version of this code was tested by BDE and I. Also fixes a lockup situation when kva gets too fragmented. Remove the maxvmiobufspace variable and sysctl, they are no longer used. Also cleanup (remove) #if 0 sections from prior commits. This code is more of a hack, but presumably the whole buffer cache implementation is going to be rewritten in the next year so it's no big deal.
1999-10-24 03:27:28 +00:00
/*
* To support extreme low-memory systems, make sure hidirtybuffers cannot
* eat up all available buffer space. This occurs when our minimum cannot
* be met. We try to size hidirtybuffers to 3/4 our buffer space assuming
BKVASIZE was bumped to 16k more than a decade ago.
2011-05-23 19:59:01 +00:00
* BKVASIZE'd buffers.
Adjust the buffer cache to better handle small-memory machines. A slightly older version of this code was tested by BDE and I. Also fixes a lockup situation when kva gets too fragmented. Remove the maxvmiobufspace variable and sysctl, they are no longer used. Also cleanup (remove) #if 0 sections from prior commits. This code is more of a hack, but presumably the whole buffer cache implementation is going to be rewritten in the next year so it's no big deal.
1999-10-24 03:27:28 +00:00
*/
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
while ((long)hidirtybuffers * BKVASIZE > 3 * hibufspace / 4) {
Adjust the buffer cache to better handle small-memory machines. A slightly older version of this code was tested by BDE and I. Also fixes a lockup situation when kva gets too fragmented. Remove the maxvmiobufspace variable and sysctl, they are no longer used. Also cleanup (remove) #if 0 sections from prior commits. This code is more of a hack, but presumably the whole buffer cache implementation is going to be rewritten in the next year so it's no big deal.
1999-10-24 03:27:28 +00:00
hidirtybuffers >>= 1;
}
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
lodirtybuffers = hidirtybuffers / 2;
Adjust the buffer cache to better handle small-memory machines. A slightly older version of this code was tested by BDE and I. Also fixes a lockup situation when kva gets too fragmented. Remove the maxvmiobufspace variable and sysctl, they are no longer used. Also cleanup (remove) #if 0 sections from prior commits. This code is more of a hack, but presumably the whole buffer cache implementation is going to be rewritten in the next year so it's no big deal.
1999-10-24 03:27:28 +00:00
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
/*
* Try to keep the number of free buffers in the specified range,
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
* and give special processes (e.g. like buf_daemon) access to an
* emergency reserve.
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
*/
Fix a problem with the VN device. Specifically, the VN device can cause a problem of spiraling death due to buffer resource limitations. The vfs_bio code in general had little ability to handle buffer resource management, and now it does. Also, there are a lot more knobs for tuning the vfs_bio code now. The knobs came free because of the need that there always be some immediately available buffers (non-delayed or locked) for use. Note that the buffer cache code is much less likely to get bogged down with lots of delayed writes, even more so than before.
1997-06-15 17:56:53 +00:00
lofreebuffers = nbuf / 18 + 5;
hifreebuffers = 2 * lofreebuffers;
numfreebuffers = nbuf;
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
Eliminate an abuse of kmem_alloc_pageable() in bufinit() by using VM_ALLOC_NOOBJ to allocate the bogus page. Reviewed by: tegge
2003-08-02 05:05:34 +00:00
bogus_page = vm_page_alloc(NULL, 0, VM_ALLOC_NOOBJ |
Allocate bogus_page with VM_ALLOC_WIRED. (Previously, bogus_page's allocation incremented the global count of wired pages, but not the page's own wire count. This inconsistency was introduced in revision 1.230.)
2003-01-05 18:46:13 +00:00
VM_ALLOC_NORMAL | VM_ALLOC_WIRED);
Replace kernel virtual address space allocation with vmem. This provides transparent layering and better fragmentation. - Normalize functions that allocate memory to use kmem_* - Those that allocate address space are named kva_* - Those that operate on maps are named kmap_* - Implement recursive allocation handling for kmem_arena in vmem. Reviewed by: alc Tested by: pho Sponsored by: EMC / Isilon Storage Division
2013-08-07 06:21:20 +00:00
unmapped_buf = (caddr_t)kva_alloc(MAXPHYS);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
}
#ifdef INVARIANTS
static inline void
vfs_buf_check_mapped(struct buf *bp)
{
KASSERT((bp->b_flags & B_UNMAPPED) == 0,
("mapped buf %p %x", bp, bp->b_flags));
KASSERT(bp->b_kvabase != unmapped_buf,
("mapped buf: b_kvabase was not updated %p", bp));
KASSERT(bp->b_data != unmapped_buf,
("mapped buf: b_data was not updated %p", bp));
}
static inline void
vfs_buf_check_unmapped(struct buf *bp)
{
KASSERT((bp->b_flags & B_UNMAPPED) == B_UNMAPPED,
("unmapped buf %p %x", bp, bp->b_flags));
KASSERT(bp->b_kvabase == unmapped_buf,
("unmapped buf: corrupted b_kvabase %p", bp));
KASSERT(bp->b_data == unmapped_buf,
("unmapped buf: corrupted b_data %p", bp));
}
#define BUF_CHECK_MAPPED(bp) vfs_buf_check_mapped(bp)
#define BUF_CHECK_UNMAPPED(bp) vfs_buf_check_unmapped(bp)
#else
#define BUF_CHECK_MAPPED(bp) do {} while (0)
#define BUF_CHECK_UNMAPPED(bp) do {} while (0)
#endif
static void
bpmap_qenter(struct buf *bp)
{
BUF_CHECK_MAPPED(bp);
/*
* bp->b_data is relative to bp->b_offset, but
* bp->b_offset may be offset into the first page.
*/
bp->b_data = (caddr_t)trunc_page((vm_offset_t)bp->b_data);
pmap_qenter((vm_offset_t)bp->b_data, bp->b_pages, bp->b_npages);
bp->b_data = (caddr_t)((vm_offset_t)bp->b_data |
(vm_offset_t)(bp->b_offset & PAGE_MASK));
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Implement a new totally dynamic (up to MAXPHYS) buffer kva allocation scheme. Additionally, add the capability for checking for unexpected kernel page faults. The maximum amount of kva space for buffers hasn't been decreased from where it is, but it will now be possible to do so. This scheme manages the kva space similar to the buffers themselves. If there isn't enough kva space because of usage or fragementation, buffers will be reclaimed until a buffer allocation is successful. This scheme should be very resistant to fragmentation problems until/if the LFS code is fixed and uses the bogus buffer locking scheme -- but a 'fixed' LFS is not likely to use such a scheme. Now there should be NO problem allocating buffers up to MAXPHYS.
1996-11-30 22:41:49 +00:00
/*
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
* bfreekva() - free the kva allocation for a buffer.
*
* Since this call frees up buffer space, we call bufspacewakeup().
Implement a new totally dynamic (up to MAXPHYS) buffer kva allocation scheme. Additionally, add the capability for checking for unexpected kernel page faults. The maximum amount of kva space for buffers hasn't been decreased from where it is, but it will now be possible to do so. This scheme manages the kva space similar to the buffers themselves. If there isn't enough kva space because of usage or fragementation, buffers will be reclaimed until a buffer allocation is successful. This scheme should be very resistant to fragmentation problems until/if the LFS code is fixed and uses the bogus buffer locking scheme -- but a 'fixed' LFS is not likely to use such a scheme. Now there should be NO problem allocating buffers up to MAXPHYS.
1996-11-30 22:41:49 +00:00
*/
static void
stylistic polishing.
2004-09-15 20:54:23 +00:00
bfreekva(struct buf *bp)
Implement a new totally dynamic (up to MAXPHYS) buffer kva allocation scheme. Additionally, add the capability for checking for unexpected kernel page faults. The maximum amount of kva space for buffers hasn't been decreased from where it is, but it will now be possible to do so. This scheme manages the kva space similar to the buffers themselves. If there isn't enough kva space because of usage or fragementation, buffers will be reclaimed until a buffer allocation is successful. This scheme should be very resistant to fragmentation problems until/if the LFS code is fixed and uses the bogus buffer locking scheme -- but a 'fixed' LFS is not likely to use such a scheme. Now there should be NO problem allocating buffers up to MAXPHYS.
1996-11-30 22:41:49 +00:00
{
stylistic polishing.
2004-09-15 20:54:23 +00:00
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if (bp->b_kvasize == 0)
return;
atomic_add_int(&buffreekvacnt, 1);
atomic_subtract_long(&bufspace, bp->b_kvasize);
if ((bp->b_flags & B_UNMAPPED) == 0) {
BUF_CHECK_MAPPED(bp);
- Add a general purpose resource allocator, vmem, from NetBSD. It was originally inspired by the Solaris vmem detailed in the proceedings of usenix 2001. The NetBSD version was heavily refactored for bugs and simplicity. - Use this resource allocator to allocate the buffer and transient maps. Buffer cache defrags are reduced by 25% when used by filesystems with mixed block sizes. Ultimately this may permit dynamic buffer cache sizing on low KVA machines. Discussed with: alc, kib, attilio Tested by: pho Sponsored by: EMC / Isilon Storage Division
2013-06-28 03:51:20 +00:00
vmem_free(buffer_arena, (vm_offset_t)bp->b_kvabase,
bp->b_kvasize);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
} else {
BUF_CHECK_UNMAPPED(bp);
if ((bp->b_flags & B_KVAALLOC) != 0) {
- Add a general purpose resource allocator, vmem, from NetBSD. It was originally inspired by the Solaris vmem detailed in the proceedings of usenix 2001. The NetBSD version was heavily refactored for bugs and simplicity. - Use this resource allocator to allocate the buffer and transient maps. Buffer cache defrags are reduced by 25% when used by filesystems with mixed block sizes. Ultimately this may permit dynamic buffer cache sizing on low KVA machines. Discussed with: alc, kib, attilio Tested by: pho Sponsored by: EMC / Isilon Storage Division
2013-06-28 03:51:20 +00:00
vmem_free(buffer_arena, (vm_offset_t)bp->b_kvaalloc,
bp->b_kvasize);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
}
atomic_subtract_long(&unmapped_bufspace, bp->b_kvasize);
bp->b_flags &= ~(B_UNMAPPED | B_KVAALLOC);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
bp->b_kvasize = 0;
bufspacewakeup();
Implement a new totally dynamic (up to MAXPHYS) buffer kva allocation scheme. Additionally, add the capability for checking for unexpected kernel page faults. The maximum amount of kva space for buffers hasn't been decreased from where it is, but it will now be possible to do so. This scheme manages the kva space similar to the buffers themselves. If there isn't enough kva space because of usage or fragementation, buffers will be reclaimed until a buffer allocation is successful. This scheme should be very resistant to fragmentation problems until/if the LFS code is fixed and uses the bogus buffer locking scheme -- but a 'fixed' LFS is not likely to use such a scheme. Now there should be NO problem allocating buffers up to MAXPHYS.
1996-11-30 22:41:49 +00:00
}
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
/*
* binsfree:
*
* Insert the buffer into the appropriate free list.
*/
static void
binsfree(struct buf *bp, int qindex)
{
struct mtx *olock, *nlock;
BUF_ASSERT_XLOCKED(bp);
olock = bqlock(bp->b_qindex);
nlock = bqlock(qindex);
mtx_lock(olock);
/* Handle delayed bremfree() processing. */
if (bp->b_flags & B_REMFREE)
bremfreel(bp);
if (bp->b_qindex != QUEUE_NONE)
panic("binsfree: free buffer onto another queue???");
bp->b_qindex = qindex;
if (olock != nlock) {
mtx_unlock(olock);
mtx_lock(nlock);
}
if (bp->b_flags & B_AGE)
TAILQ_INSERT_HEAD(&bufqueues[bp->b_qindex], bp, b_freelist);
else
TAILQ_INSERT_TAIL(&bufqueues[bp->b_qindex], bp, b_freelist);
#ifdef INVARIANTS
bq_len[bp->b_qindex]++;
#endif
mtx_unlock(nlock);
/*
* Something we can maybe free or reuse.
*/
if (bp->b_bufsize && !(bp->b_flags & B_DELWRI))
bufspacewakeup();
if ((bp->b_flags & B_INVAL) || !(bp->b_flags & B_DELWRI))
bufcountadd(bp);
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/*
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
* bremfree:
*
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
* Mark the buffer for removal from the appropriate free list.
- Eliminate the acquisition and release of the bqlock in bremfree() by setting the B_REMFREE flag in the buf. This is done to prevent lock order reversals with code that must call bremfree() with a local lock held. This also reduces overhead by removing two lock operations per buf for fsync() and similar. - Check for the B_REMFREE flag in brelse() and bqrelse() after the bqlock has been acquired so that we may remove ourself from the free-list. - Provide a bremfreef() function to immediately remove a buf from a free-list for use only by NFS. This is done because the nfsclient code overloads the b_freelist queue for its own async. io queue. - Simplify the numfreebuffers accounting by removing a switch statement that executed the same code in every possible case. - getnewbuf() can encounter locked bufs on free-lists once Giant is removed. Remove a panic associated with this condition and delay asserts that inspect the buf until after it is locked. Reviewed by: phk Sponsored by: Isilon Systems, Inc.
2004-11-18 08:44:09 +00:00
*
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
*/
void
stylistic polishing.
2004-09-15 20:54:23 +00:00
bremfree(struct buf *bp)
- Introduce a new function bremfreel() that does a bremfree with the buf queue lock already held. - In getblk() and flushbufqueues() use bremfreel() while we still have the buf queue lock held to keep the lists consistent. - Add LK_NOWAIT to two cases where we're essentially asserting that the bufs are not locked while acquiring the locks. This will make sure that we get the appropriate panic() and not another one for sleeping with a lock held.
2003-02-16 10:43:06 +00:00
{
stylistic polishing.
2004-09-15 20:54:23 +00:00
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
CTR3(KTR_BUF, "bremfree(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
- Split one KASSERT in bremfree() into two to aid in debugging. Sponsored by: Isilon Systems, Inc.
2005-06-13 00:45:05 +00:00
KASSERT((bp->b_flags & B_REMFREE) == 0,
("bremfree: buffer %p already marked for delayed removal.", bp));
KASSERT(bp->b_qindex != QUEUE_NONE,
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
("bremfree: buffer %p not on a queue.", bp));
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
BUF_ASSERT_XLOCKED(bp);
- Eliminate the acquisition and release of the bqlock in bremfree() by setting the B_REMFREE flag in the buf. This is done to prevent lock order reversals with code that must call bremfree() with a local lock held. This also reduces overhead by removing two lock operations per buf for fsync() and similar. - Check for the B_REMFREE flag in brelse() and bqrelse() after the bqlock has been acquired so that we may remove ourself from the free-list. - Provide a bremfreef() function to immediately remove a buf from a free-list for use only by NFS. This is done because the nfsclient code overloads the b_freelist queue for its own async. io queue. - Simplify the numfreebuffers accounting by removing a switch statement that executed the same code in every possible case. - getnewbuf() can encounter locked bufs on free-lists once Giant is removed. Remove a panic associated with this condition and delay asserts that inspect the buf until after it is locked. Reviewed by: phk Sponsored by: Isilon Systems, Inc.
2004-11-18 08:44:09 +00:00
bp->b_flags |= B_REMFREE;
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
bufcountsub(bp);
- Eliminate the acquisition and release of the bqlock in bremfree() by setting the B_REMFREE flag in the buf. This is done to prevent lock order reversals with code that must call bremfree() with a local lock held. This also reduces overhead by removing two lock operations per buf for fsync() and similar. - Check for the B_REMFREE flag in brelse() and bqrelse() after the bqlock has been acquired so that we may remove ourself from the free-list. - Provide a bremfreef() function to immediately remove a buf from a free-list for use only by NFS. This is done because the nfsclient code overloads the b_freelist queue for its own async. io queue. - Simplify the numfreebuffers accounting by removing a switch statement that executed the same code in every possible case. - getnewbuf() can encounter locked bufs on free-lists once Giant is removed. Remove a panic associated with this condition and delay asserts that inspect the buf until after it is locked. Reviewed by: phk Sponsored by: Isilon Systems, Inc.
2004-11-18 08:44:09 +00:00
}
/*
* bremfreef:
*
* Force an immediate removal from a free list. Used only in nfs when
* it abuses the b_freelist pointer.
*/
void
bremfreef(struct buf *bp)
{
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
struct mtx *qlock;
qlock = bqlock(bp->b_qindex);
mtx_lock(qlock);
- Introduce a new function bremfreel() that does a bremfree with the buf queue lock already held. - In getblk() and flushbufqueues() use bremfreel() while we still have the buf queue lock held to keep the lists consistent. - Add LK_NOWAIT to two cases where we're essentially asserting that the bufs are not locked while acquiring the locks. This will make sure that we get the appropriate panic() and not another one for sleeping with a lock held.
2003-02-16 10:43:06 +00:00
bremfreel(bp);
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_unlock(qlock);
- Introduce a new function bremfreel() that does a bremfree with the buf queue lock already held. - In getblk() and flushbufqueues() use bremfreel() while we still have the buf queue lock held to keep the lists consistent. - Add LK_NOWAIT to two cases where we're essentially asserting that the bufs are not locked while acquiring the locks. This will make sure that we get the appropriate panic() and not another one for sleeping with a lock held.
2003-02-16 10:43:06 +00:00
}
- Eliminate the acquisition and release of the bqlock in bremfree() by setting the B_REMFREE flag in the buf. This is done to prevent lock order reversals with code that must call bremfree() with a local lock held. This also reduces overhead by removing two lock operations per buf for fsync() and similar. - Check for the B_REMFREE flag in brelse() and bqrelse() after the bqlock has been acquired so that we may remove ourself from the free-list. - Provide a bremfreef() function to immediately remove a buf from a free-list for use only by NFS. This is done because the nfsclient code overloads the b_freelist queue for its own async. io queue. - Simplify the numfreebuffers accounting by removing a switch statement that executed the same code in every possible case. - getnewbuf() can encounter locked bufs on free-lists once Giant is removed. Remove a panic associated with this condition and delay asserts that inspect the buf until after it is locked. Reviewed by: phk Sponsored by: Isilon Systems, Inc.
2004-11-18 08:44:09 +00:00
/*
* bremfreel:
*
* Removes a buffer from the free list, must be called with the
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
* correct qlock held.
- Eliminate the acquisition and release of the bqlock in bremfree() by setting the B_REMFREE flag in the buf. This is done to prevent lock order reversals with code that must call bremfree() with a local lock held. This also reduces overhead by removing two lock operations per buf for fsync() and similar. - Check for the B_REMFREE flag in brelse() and bqrelse() after the bqlock has been acquired so that we may remove ourself from the free-list. - Provide a bremfreef() function to immediately remove a buf from a free-list for use only by NFS. This is done because the nfsclient code overloads the b_freelist queue for its own async. io queue. - Simplify the numfreebuffers accounting by removing a switch statement that executed the same code in every possible case. - getnewbuf() can encounter locked bufs on free-lists once Giant is removed. Remove a panic associated with this condition and delay asserts that inspect the buf until after it is locked. Reviewed by: phk Sponsored by: Isilon Systems, Inc.
2004-11-18 08:44:09 +00:00
*/
Make various vnode related functions static
2005-02-10 12:28:58 +00:00
static void
stylistic polishing.
2004-09-15 20:54:23 +00:00
bremfreel(struct buf *bp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Add INVARIANTS checking that numfreebufs values are sane. Also add a per-buf flag to catch if a buf is double-counted in the free count. This code was useful to debug an instance where a local patch at Isilon was incorrectly managing numfreebufs for a new buf state. Reviewed by: jeff Approved by: zml (mentor)
2010-06-11 17:03:26 +00:00
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
CTR3(KTR_BUF, "bremfreel(%p) vp %p flags %X",
bp, bp->b_vp, bp->b_flags);
KASSERT(bp->b_qindex != QUEUE_NONE,
("bremfreel: buffer %p not on a queue.", bp));
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
BUF_ASSERT_XLOCKED(bp);
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_assert(bqlock(bp->b_qindex), MA_OWNED);
With Alfred's permission, remove vm_mtx in favor of a fine-grained approach (this commit is just the first stage). Also add various GIANT_ macros to formalize the removal of Giant, making it easy to test in a more piecemeal fashion. These macros will allow us to test fine-grained locks to a degree before removing Giant, and also after, and to remove Giant in a piecemeal fashion via sysctl's on those subsystems which the authors believe can operate without Giant.
2001-07-04 16:20:28 +00:00
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
TAILQ_REMOVE(&bufqueues[bp->b_qindex], bp, b_freelist);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
#ifdef INVARIANTS
KASSERT(bq_len[bp->b_qindex] >= 1, ("queue %d underflow",
bp->b_qindex));
bq_len[bp->b_qindex]--;
#endif
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
bp->b_qindex = QUEUE_NONE;
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
/*
- Eliminate the acquisition and release of the bqlock in bremfree() by setting the B_REMFREE flag in the buf. This is done to prevent lock order reversals with code that must call bremfree() with a local lock held. This also reduces overhead by removing two lock operations per buf for fsync() and similar. - Check for the B_REMFREE flag in brelse() and bqrelse() after the bqlock has been acquired so that we may remove ourself from the free-list. - Provide a bremfreef() function to immediately remove a buf from a free-list for use only by NFS. This is done because the nfsclient code overloads the b_freelist queue for its own async. io queue. - Simplify the numfreebuffers accounting by removing a switch statement that executed the same code in every possible case. - getnewbuf() can encounter locked bufs on free-lists once Giant is removed. Remove a panic associated with this condition and delay asserts that inspect the buf until after it is locked. Reviewed by: phk Sponsored by: Isilon Systems, Inc.
2004-11-18 08:44:09 +00:00
* If this was a delayed bremfree() we only need to remove the buffer
* from the queue and return the stats are already done.
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
*/
- Eliminate the acquisition and release of the bqlock in bremfree() by setting the B_REMFREE flag in the buf. This is done to prevent lock order reversals with code that must call bremfree() with a local lock held. This also reduces overhead by removing two lock operations per buf for fsync() and similar. - Check for the B_REMFREE flag in brelse() and bqrelse() after the bqlock has been acquired so that we may remove ourself from the free-list. - Provide a bremfreef() function to immediately remove a buf from a free-list for use only by NFS. This is done because the nfsclient code overloads the b_freelist queue for its own async. io queue. - Simplify the numfreebuffers accounting by removing a switch statement that executed the same code in every possible case. - getnewbuf() can encounter locked bufs on free-lists once Giant is removed. Remove a panic associated with this condition and delay asserts that inspect the buf until after it is locked. Reviewed by: phk Sponsored by: Isilon Systems, Inc.
2004-11-18 08:44:09 +00:00
if (bp->b_flags & B_REMFREE) {
bp->b_flags &= ~B_REMFREE;
return;
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
}
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
bufcountsub(bp);
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
/*
* Attempt to initiate asynchronous I/O on read-ahead blocks. We must
* clear BIO_ERROR and B_INVAL prior to initiating I/O . If B_CACHE is set,
* the buffer is valid and we do not have to do anything.
*/
void
breada(struct vnode * vp, daddr_t * rablkno, int * rabsize,
int cnt, struct ucred * cred)
{
struct buf *rabp;
int i;
for (i = 0; i < cnt; i++, rablkno++, rabsize++) {
if (inmem(vp, *rablkno))
continue;
rabp = getblk(vp, *rablkno, *rabsize, 0, 0, 0);
if ((rabp->b_flags & B_CACHE) == 0) {
Instead of doing comparisons using the pcpu area to see if a thread is an idle thread, just see if it has the IDLETD flag set. That flag will probably move to the pflags word as it's permenent and never chenges for the life of the system so it doesn't need locking.
2007-03-08 06:44:34 +00:00
if (!TD_IS_IDLETHREAD(curthread))
- Move rusage from being per-process in struct pstats to per-thread in td_ru. This removes the requirement for per-process synchronization in statclock() and mi_switch(). This was previously supported by sched_lock which is going away. All modifications to rusage are now done in the context of the owning thread. reads proceed without locks. - Aggregate exiting threads rusage in thread_exit() such that the exiting thread's rusage is not lost. - Provide a new routine, rufetch() to fetch an aggregate of all rusage structures from all threads in a process. This routine must be used in any place requiring a rusage from a process prior to it's exit. The exited process's rusage is still available via p_ru. - Aggregate tick statistics only on demand via rufetch() or when a thread exits. Tick statistics are kept in the thread and protected by sched_lock until it exits. Initial patch by: attilio Reviewed by: attilio, bde (some objections), arch (mostly silent)
2007-06-01 01:12:45 +00:00
curthread->td_ru.ru_inblock++;
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
rabp->b_flags |= B_ASYNC;
rabp->b_flags &= ~B_INVAL;
rabp->b_ioflags &= ~BIO_ERROR;
rabp->b_iocmd = BIO_READ;
if (rabp->b_rcred == NOCRED && cred != NOCRED)
rabp->b_rcred = crhold(cred);
vfs_busy_pages(rabp, 0);
BUF_KERNPROC(rabp);
rabp->b_iooffset = dbtob(rabp->b_blkno);
bstrategy(rabp);
} else {
brelse(rabp);
}
}
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/*
This change avoids a kernel deadlock on "snaplk" when using snapshots on UFS filesystems running with journaled soft updates. This is the first of several bugs that need to be fixed before removing the restriction added in -r230250 to prevent the use of snapshots on filesystems running with journaled soft updates. The deadlock occurs when holding the snapshot lock (snaplk) and then trying to flush an inode via ffs_update(). We become blocked by another process trying to flush a different inode contained in the same inode block that we need. It holds the inode block for which we are waiting locked. When it tries to write the inode block, it gets blocked waiting for the our snaplk when it calls ffs_copyonwrite() to see if the inode block needs to be copied in our snapshot. The most obvious place that this deadlock arises is in the ffs_copyonwrite() routine when it updates critical metadata in a snapshot and tries to write it out before proceeding. The fix here is to write the data and indirect block pointer for the snapshot, but to skip the call to ffs_update() to write the snapshot inode. To ensure that we will never have to update a pointer in the inode itself, the ffs_snapshot() routine that creates the snapshot has to ensure that all the direct blocks are allocated as part of the creation of the snapshot. A less obvious place that this deadlock occurs is when we hold the snaplk because we are deleting a snapshot. In the course of doing the deletion, we need to allocate various soft update dependency structures and allocate some journal space. If we hit a resource limit while doing this we decrease the resources in use by flushing out an existing dirty file to get it to give up the soft dependency resources that it holds. The flush can cause an ffs_update() to be done on the inode for the file that we have selected to flush resulting in the same deadlock as described above when the inode that we have chosen to flush resides in the same inode block as the snapshot inode that we hold. The fix is to defer cleaning up any time that the inode on which we are operating is a snapshot. Help and review by: Jeff Roberson Tested by: Peter Holm MFC (to 9 only) after: 2 weeks
2012-03-01 18:45:25 +00:00
* Entry point for bread() and breadn() via #defines in sys/buf.h.
*
* Get a buffer with the specified data. Look in the cache first. We
* must clear BIO_ERROR and B_INVAL prior to initiating I/O. If B_CACHE
* is set, the buffer is valid and we do not have to do anything, see
* getblk(). Also starts asynchronous I/O on read-ahead blocks.
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
*/
int
Some style fixes. Sponsored by: The FreeBSD Foundation
2013-03-14 20:31:39 +00:00
breadn_flags(struct vnode *vp, daddr_t blkno, int size, daddr_t *rablkno,
int *rabsize, int cnt, struct ucred *cred, int flags, struct buf **bpp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
struct buf *bp;
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
int rv = 0, readwait = 0;
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
CTR3(KTR_BUF, "breadn(%p, %jd, %d)", vp, blkno, size);
This change avoids a kernel deadlock on "snaplk" when using snapshots on UFS filesystems running with journaled soft updates. This is the first of several bugs that need to be fixed before removing the restriction added in -r230250 to prevent the use of snapshots on filesystems running with journaled soft updates. The deadlock occurs when holding the snapshot lock (snaplk) and then trying to flush an inode via ffs_update(). We become blocked by another process trying to flush a different inode contained in the same inode block that we need. It holds the inode block for which we are waiting locked. When it tries to write the inode block, it gets blocked waiting for the our snaplk when it calls ffs_copyonwrite() to see if the inode block needs to be copied in our snapshot. The most obvious place that this deadlock arises is in the ffs_copyonwrite() routine when it updates critical metadata in a snapshot and tries to write it out before proceeding. The fix here is to write the data and indirect block pointer for the snapshot, but to skip the call to ffs_update() to write the snapshot inode. To ensure that we will never have to update a pointer in the inode itself, the ffs_snapshot() routine that creates the snapshot has to ensure that all the direct blocks are allocated as part of the creation of the snapshot. A less obvious place that this deadlock occurs is when we hold the snaplk because we are deleting a snapshot. In the course of doing the deletion, we need to allocate various soft update dependency structures and allocate some journal space. If we hit a resource limit while doing this we decrease the resources in use by flushing out an existing dirty file to get it to give up the soft dependency resources that it holds. The flush can cause an ffs_update() to be done on the inode for the file that we have selected to flush resulting in the same deadlock as described above when the inode that we have chosen to flush resides in the same inode block as the snapshot inode that we hold. The fix is to defer cleaning up any time that the inode on which we are operating is a snapshot. Help and review by: Jeff Roberson Tested by: Peter Holm MFC (to 9 only) after: 2 weeks
2012-03-01 18:45:25 +00:00
/*
* Can only return NULL if GB_LOCK_NOWAIT flag is specified.
*/
*bpp = bp = getblk(vp, blkno, size, 0, 0, flags);
if (bp == NULL)
return (EBUSY);
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/* if not found in cache, do some I/O */
if ((bp->b_flags & B_CACHE) == 0) {
Instead of doing comparisons using the pcpu area to see if a thread is an idle thread, just see if it has the IDLETD flag set. That flag will probably move to the pflags word as it's permenent and never chenges for the life of the system so it doesn't need locking.
2007-03-08 06:44:34 +00:00
if (!TD_IS_IDLETHREAD(curthread))
- Move rusage from being per-process in struct pstats to per-thread in td_ru. This removes the requirement for per-process synchronization in statclock() and mi_switch(). This was previously supported by sched_lock which is going away. All modifications to rusage are now done in the context of the owning thread. reads proceed without locks. - Aggregate exiting threads rusage in thread_exit() such that the exiting thread's rusage is not lost. - Provide a new routine, rufetch() to fetch an aggregate of all rusage structures from all threads in a process. This routine must be used in any place requiring a rusage from a process prior to it's exit. The exited process's rusage is still available via p_ru. - Aggregate tick statistics only on demand via rufetch() or when a thread exits. Tick statistics are kept in the thread and protected by sched_lock until it exits. Initial patch by: attilio Reviewed by: attilio, bde (some objections), arch (mostly silent)
2007-06-01 01:12:45 +00:00
curthread->td_ru.ru_inblock++;
Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new field in struct buf: b_iocmd. The b_iocmd is enforced to have exactly one bit set. B_WRITE was bogusly defined as zero giving rise to obvious coding mistakes. Also eliminate the redundant struct buf flag B_CALL, it can just as efficiently be done by comparing b_iodone to NULL. Should you get a panic or drop into the debugger, complaining about "b_iocmd", don't continue. It is likely to write on your disk where it should have been reading. This change is a step in the direction towards a stackable BIO capability. A lot of this patch were machine generated (Thanks to style(9) compliance!) Vinum users: Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
bp->b_iocmd = BIO_READ;
Move B_ERROR flag to b_ioflags and call it BIO_ERROR. (Much of this done by script) Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED. Move b_pblkno and b_iodone_chain to struct bio while we transition, they will be obsoleted once bio structs chain/stack. Add bio_queue field for struct bio aware disksort. Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
bp->b_flags &= ~B_INVAL;
bp->b_ioflags &= ~BIO_ERROR;
Change the kernel's ucred API as follows: - crhold() returns a reference to the ucred whose refcount it bumps. - crcopy() now simply copies the credentials from one credential to another and has no return value. - a new crshared() primitive is added which returns true if a ucred's refcount is > 1 and false (0) otherwise.
2001-10-11 23:38:17 +00:00
if (bp->b_rcred == NOCRED && cred != NOCRED)
bp->b_rcred = crhold(cred);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
vfs_busy_pages(bp, 0);
Initialize b_iooffset before calling VOP_[SPEC]STRATEGY
2003-10-18 19:49:46 +00:00
bp->b_iooffset = dbtob(bp->b_blkno);
Move the buffer method vector (buf->b_op) to the bufobj. Extend it with a strategy method. Add bufstrategy() which do the usual VOP_SPECSTRATEGY/VOP_STRATEGY song and dance. Rename ibwrite to bufwrite(). Move the two NFS buf_ops to more sensible places, add bufstrategy to them. Add inlines for bwrite() and bstrategy() which calls through buf->b_bufobj->b_ops->b_{write,strategy}(). Replace almost all VOP_STRATEGY()/VOP_SPECSTRATEGY() calls with bstrategy().
2004-10-24 20:03:41 +00:00
bstrategy(bp);
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
++readwait;
}
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
breada(vp, rablkno, rabsize, cnt, cred);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
if (readwait) {
s/biowait/bufwait/g Prodded by: several.
2000-04-29 16:25:22 +00:00
rv = bufwait(bp);
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
}
return (rv);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/*
* Write, release buffer on completion. (Done by iodone
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* if async). Do not bother writing anything if the buffer
* is invalid.
*
* Note that we set B_CACHE here, indicating that buffer is
* fully valid and thus cacheable. This is true even of NFS
* now so we set it generally. This could be set either here
* or in biodone() since the I/O is synchronous. We put it
* here.
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
*/
int
Move the buffer method vector (buf->b_op) to the bufobj. Extend it with a strategy method. Add bufstrategy() which do the usual VOP_SPECSTRATEGY/VOP_STRATEGY song and dance. Rename ibwrite to bufwrite(). Move the two NFS buf_ops to more sensible places, add bufstrategy to them. Add inlines for bwrite() and bstrategy() which calls through buf->b_bufobj->b_ops->b_{write,strategy}(). Replace almost all VOP_STRATEGY()/VOP_SPECSTRATEGY() calls with bstrategy().
2004-10-24 20:03:41 +00:00
bufwrite(struct buf *bp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
- Remove long dead splbio() calls and comments relating to the old synchronization mechanism.
2005-04-30 12:18:50 +00:00
int oldflags;
In rev. 1.514, iodone on async buffer may happen before code checks the vnode v_flag. For cluster buffers this would result in dereferencing NULL b_vp. To prevent the panic, cache relevant vnode flag before calling bstrategy. Reported by: Peter Holm, kris Tested by: Peter Holm Reviewed by: tegge Pointy hat to: kib
2006-12-20 09:22:31 +00:00
struct vnode *vp;
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
long space;
In rev. 1.514, iodone on async buffer may happen before code checks the vnode v_flag. For cluster buffers this would result in dereferencing NULL b_vp. To prevent the panic, cache relevant vnode flag before calling bstrategy. Reported by: Peter Holm, kris Tested by: Peter Holm Reviewed by: tegge Pointy hat to: kib
2006-12-20 09:22:31 +00:00
int vp_md;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
CTR3(KTR_BUF, "bufwrite(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
if (bp->b_flags & B_INVAL) {
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
brelse(bp);
return (0);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
In kern_physio.c fix tsleep priority messup. In vfs_bio.c, remove b_generation count usage, remove redundant reassignbuf, remove redundant spl(s), manage page PG_ZERO flags more correctly, utilize in invalid value for b_offset until it is properly initialized. Add asserts for #ifdef DIAGNOSTIC, when b_offset is improperly used. when a process is not performing I/O, and just waiting on a buffer generally, make the sleep priority low. only check page validity in getblk for B_VMIO buffers. In vfs_cluster, add b_offset asserts, correct pointer calculation for clustered reads. Improve readability of certain parts of the code. Remove redundant spl(s). In vfs_subr, correct usage of vfs_bio_awrite (From Andrew Gallatin <gallatin@cs.duke.edu>). More vtruncbuf problems fixed.
1998-03-19 22:48:16 +00:00
Add barrier write capability to the VFS buffer interface. A barrier write is a disk write request that tells the disk that the buffer being written must be committed to the media along with any writes that preceeded it before any future blocks may be written to the drive. Barrier writes are provided by adding the functions bbarrierwrite (bwrite with barrier) and babarrierwrite (bawrite with barrier). Following a bbarrierwrite the client knows that the requested buffer is on the media. It does not ensure that buffers written before that buffer are on the media. It only ensure that buffers written before that buffer will get to the media before any buffers written after that buffer. A flush command must be sent to the disk to ensure that all earlier written buffers are on the media. Reviewed by: kib Tested by: Peter Holm
2013-02-16 14:51:30 +00:00
if (bp->b_flags & B_BARRIER)
barrierwrites++;
In kern_physio.c fix tsleep priority messup. In vfs_bio.c, remove b_generation count usage, remove redundant reassignbuf, remove redundant spl(s), manage page PG_ZERO flags more correctly, utilize in invalid value for b_offset until it is properly initialized. Add asserts for #ifdef DIAGNOSTIC, when b_offset is improperly used. when a process is not performing I/O, and just waiting on a buffer generally, make the sleep priority low. only check page validity in getblk for B_VMIO buffers. In vfs_cluster, add b_offset asserts, correct pointer calculation for clustered reads. Improve readability of certain parts of the code. Remove redundant spl(s). In vfs_subr, correct usage of vfs_bio_awrite (From Andrew Gallatin <gallatin@cs.duke.edu>). More vtruncbuf problems fixed.
1998-03-19 22:48:16 +00:00
oldflags = bp->b_flags;
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
if (bp->b_pin_count > 0)
bunpin_wait(bp);
Background writes are entirely an FFS/Softupdates thing. Give FFS vnodes a specific bufwrite method which contains all the background write stuff and then calls into the default bufwrite() for the rest of the job. Remove all the background write related stuff from the normal bufwrite. This drags the softdep_move_dependencies() back into FFS. Long term, it is worth looking at simply copying the data into allocated memory and issuing the bio directly and not create the "shadow buf" in the first place (just like copy-on-write is done in snapshots for instance). I don't think we really gain anything but complexity from doing this with a buf.
2005-02-08 20:29:10 +00:00
KASSERT(!(bp->b_vflags & BV_BKGRDINPROG),
("FFS background buffer should not get here %p", bp));
Several performance improvements for soft updates have been added: 1) Fastpath deletions. When a file is being deleted, check to see if it was so recently created that its inode has not yet been written to disk. If so, the delete can proceed to immediately free the inode. 2) Background writes: No file or block allocations can be done while the bitmap is being written to disk. To avoid these stalls, the bitmap is copied to another buffer which is written thus leaving the original available for futher allocations. 3) Link count tracking. Constantly track the difference in i_effnlink and i_nlink so that inodes that have had no change other than i_effnlink need not be written. 4) Identify buffers with rollback dependencies so that the buffer flushing daemon can choose to skip over them.
2000-01-10 00:24:24 +00:00
In rev. 1.514, iodone on async buffer may happen before code checks the vnode v_flag. For cluster buffers this would result in dereferencing NULL b_vp. To prevent the panic, cache relevant vnode flag before calling bstrategy. Reported by: Peter Holm, kris Tested by: Peter Holm Reviewed by: tegge Pointy hat to: kib
2006-12-20 09:22:31 +00:00
vp = bp->b_vp;
if (vp)
vp_md = vp->v_vflag & VV_MD;
else
vp_md = 0;
In bufwrite(), a dirty buffer is moved to the clean queue before the bufobj counter of the writes in progress is incremented. Other thread inspecting the bufobj would consider it clean. For the regular vnodes, the vnode lock is typically held both by the thread performing the bufwrite() and an other thread doing syncing, which prevents the situation. On the other hand, writes to the VCHR vnodes are done without holding vnode lock. Increment the write ref counter for the buffer object before calling bundirty(). Sponsored by: The FreeBSD Foundation Tested by: pho MFC after: 2 weeks
2013-03-20 21:08:00 +00:00
/*
* Mark the buffer clean. Increment the bufobj write count
* before bundirty() call, to prevent other thread from seeing
* empty dirty list and zero counter for writes in progress,
* falsely indicating that the bufobj is clean.
*/
bufobj_wref(bp->b_bufobj);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
bundirty(bp);
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
Move B_ERROR flag to b_ioflags and call it BIO_ERROR. (Much of this done by script) Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED. Move b_pblkno and b_iodone_chain to struct bio while we transition, they will be obsoleted once bio structs chain/stack. Add bio_queue field for struct bio aware disksort. Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
bp->b_flags &= ~B_DONE;
bp->b_ioflags &= ~BIO_ERROR;
Remove unused B_WRITEINPROG flag
2004-09-15 21:49:22 +00:00
bp->b_flags |= B_CACHE;
Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new field in struct buf: b_iocmd. The b_iocmd is enforced to have exactly one bit set. B_WRITE was bogusly defined as zero giving rise to obvious coding mistakes. Also eliminate the redundant struct buf flag B_CALL, it can just as efficiently be done by comparing b_iodone to NULL. Should you get a panic or drop into the debugger, complaining about "b_iocmd", don't continue. It is likely to write on your disk where it should have been reading. This change is a step in the direction towards a stackable BIO capability. A lot of this patch were machine generated (Thanks to style(9) compliance!) Vinum users: Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
bp->b_iocmd = BIO_WRITE;
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
vfs_busy_pages(bp, 1);
Fix lockup for loopback NFS mounts. The pipelined I/O limitations could be hit on the client side and prevent the server side from retiring writes. Pipeline operations turned off for all READs (no big loss since reads are usually synchronous) and for NFS writes, and left on for the default bwrite(). (MFC expected prior to 4.3 freeze) Testing by: mjacob, dillon
2001-02-28 04:13:11 +00:00
/*
* Normal bwrites pipeline writes
*/
bp->b_runningbufspace = bp->b_bufsize;
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
space = atomic_fetchadd_long(&runningbufspace, bp->b_runningbufspace);
Fix lockup for loopback NFS mounts. The pipelined I/O limitations could be hit on the client side and prevent the server side from retiring writes. Pipeline operations turned off for all READs (no big loss since reads are usually synchronous) and for NFS writes, and left on for the default bwrite(). (MFC expected prior to 4.3 freeze) Testing by: mjacob, dillon
2001-02-28 04:13:11 +00:00
Instead of doing comparisons using the pcpu area to see if a thread is an idle thread, just see if it has the IDLETD flag set. That flag will probably move to the pflags word as it's permenent and never chenges for the life of the system so it doesn't need locking.
2007-03-08 06:44:34 +00:00
if (!TD_IS_IDLETHREAD(curthread))
- Move rusage from being per-process in struct pstats to per-thread in td_ru. This removes the requirement for per-process synchronization in statclock() and mi_switch(). This was previously supported by sched_lock which is going away. All modifications to rusage are now done in the context of the owning thread. reads proceed without locks. - Aggregate exiting threads rusage in thread_exit() such that the exiting thread's rusage is not lost. - Provide a new routine, rufetch() to fetch an aggregate of all rusage structures from all threads in a process. This routine must be used in any place requiring a rusage from a process prior to it's exit. The exited process's rusage is still available via p_ru. - Aggregate tick statistics only on demand via rufetch() or when a thread exits. Tick statistics are kept in the thread and protected by sched_lock until it exits. Initial patch by: attilio Reviewed by: attilio, bde (some objections), arch (mostly silent)
2007-06-01 01:12:45 +00:00
curthread->td_ru.ru_oublock++;
Hopefully fix the remaining glitches with the BUF_*() changes. This should (really this time) fix pageout to swap and a couple of clustering cases. This simplifies BUF_KERNPROC() so that it unconditionally reassigns the lock owner rather than testing B_ASYNC and having the caller decide when to do the reassign. At present this is required because some places use B_CALL/b_iodone to free the buffers without B_ASYNC being set. Also, vfs_cluster.c explicitly calls BUF_KERNPROC() when attaching the buffers rather than the parent walking the cluster_head tailq. Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-06-29 05:59:47 +00:00
if (oldflags & B_ASYNC)
BUF_KERNPROC(bp);
Initialize b_iooffset before calling VOP_[SPEC]STRATEGY
2003-10-18 19:49:46 +00:00
bp->b_iooffset = dbtob(bp->b_blkno);
Move the buffer method vector (buf->b_op) to the bufobj. Extend it with a strategy method. Add bufstrategy() which do the usual VOP_SPECSTRATEGY/VOP_STRATEGY song and dance. Rename ibwrite to bufwrite(). Move the two NFS buf_ops to more sensible places, add bufstrategy to them. Add inlines for bwrite() and bstrategy() which calls through buf->b_bufobj->b_ops->b_{write,strategy}(). Replace almost all VOP_STRATEGY()/VOP_SPECSTRATEGY() calls with bstrategy().
2004-10-24 20:03:41 +00:00
bstrategy(bp);
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
A modification that allows the driver strategy to modify the B_ASYNC flag broke things pretty bad (freeing buffer already on queue or other wierd buffer queue errors.) The broken code is left in commented out, but this makes the problem go away for now.
1996-09-13 03:15:45 +00:00
if ((oldflags & B_ASYNC) == 0) {
s/biowait/bufwait/g Prodded by: several.
2000-04-29 16:25:22 +00:00
int rtval = bufwait(bp);
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
brelse(bp);
return (rtval);
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
} else if (space > hirunningspace) {
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
/*
* don't allow the async write to saturate the I/O
The IO_NOWDRAIN and B_NOWDRAIN hacks are no longer needed to prevent deadlocks with vnode backed md(4) devices because md now uses a kthread to run the bio requests instead of doing it directly from the bio down path.
2003-05-31 16:42:45 +00:00
* system. We will not deadlock here because
Implement IO_NOWDRAIN and B_NOWDRAIN - prevents the buffer cache from blocking in wdrain during a write. This flag needs to be used in devices whos strategy routines turn-around and issue another high level I/O, such as when MD turns around and issues a VOP_WRITE to vnode backing store, in order to avoid deadlocking the dirty buffer draining code. Remove a vprintf() warning from MD when the backing vnode is found to be in-use. The syncer of buf_daemon could be flushing the backing vnode at the time of an MD operation so the warning is not correct. MFC after: 1 week
2001-11-05 18:48:54 +00:00
* we are blocking waiting for I/O that is already in-progress
Allow the bufdaemon and update daemon processes to skip the waitrunningbufspace() calls so that they are always able to proceed and clean up buffer space. Submitted by: Brian Fundakowski Feldman <green@freebsd.org>
2003-11-04 06:30:00 +00:00
* to complete. We do not block here if it is the update
* or syncer daemon trying to clean up as that can lead
* to deadlock.
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
*/
In rev. 1.514, iodone on async buffer may happen before code checks the vnode v_flag. For cluster buffers this would result in dereferencing NULL b_vp. To prevent the panic, cache relevant vnode flag before calling bstrategy. Reported by: Peter Holm, kris Tested by: Peter Holm Reviewed by: tegge Pointy hat to: kib
2006-12-20 09:22:31 +00:00
if ((curthread->td_pflags & TDP_NORUNNINGBUF) == 0 && !vp_md)
Allow the bufdaemon and update daemon processes to skip the waitrunningbufspace() calls so that they are always able to proceed and clean up buffer space. Submitted by: Brian Fundakowski Feldman <green@freebsd.org>
2003-11-04 06:30:00 +00:00
waitrunningbufspace();
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
return (0);
Fix a problem with the VN device. Specifically, the VN device can cause a problem of spiraling death due to buffer resource limitations. The vfs_bio code in general had little ability to handle buffer resource management, and now it does. Also, there are a lot more knobs for tuning the vfs_bio code now. The knobs came free because of the need that there always be some immediately available buffers (non-delayed or locked) for use. Note that the buffer cache code is much less likely to get bogged down with lots of delayed writes, even more so than before.
1997-06-15 17:56:53 +00:00
}
Cylinder group bitmaps and blocks containing inode for a snapshot file are after snaplock, while other ffs device buffers are before snaplock in global lock order. By itself, this could cause deadlock when bdwrite() tries to flush dirty buffers on snapshotted ffs. If, during the flush, COW activity for snapshot needs to allocate block and ffs_alloccg() selects the cylinder group that is being written by bdwrite(), then kernel would panic due to recursive buffer lock acquision. Avoid dealing with buffers in bdwrite() that are from other side of snaplock divisor in the lock order then the buffer being written. Add new BOP, bop_bdwrite(), to do dirty buffer flushing for same vnode in the bdwrite(). Default implementation, bufbdflush(), refactors the code from bdwrite(). For ffs device buffers, specialized implementation is used. Reviewed by: tegge, jeff, Russell Cattelan (cattelan xfs org, xfs changes) Tested by: Peter Holm X-MFC after: 3 weeks (if ever: it changes ABI)
2007-01-23 10:01:19 +00:00
void
bufbdflush(struct bufobj *bo, struct buf *bp)
{
struct buf *nbp;
if (bo->bo_dirty.bv_cnt > dirtybufthresh + 10) {
(void) VOP_FSYNC(bp->b_vp, MNT_NOWAIT, curthread);
altbufferflushes++;
} else if (bo->bo_dirty.bv_cnt > dirtybufthresh) {
BO_LOCK(bo);
/*
* Try to find a buffer to flush.
*/
TAILQ_FOREACH(nbp, &bo->bo_dirty.bv_hd, b_bobufs) {
if ((nbp->b_vflags & BV_BKGRDINPROG) ||
BUF_LOCK(nbp,
LK_EXCLUSIVE | LK_NOWAIT, NULL))
continue;
if (bp == nbp)
panic("bdwrite: found ourselves");
BO_UNLOCK(bo);
/* Don't countdeps with the bo lock held. */
if (buf_countdeps(nbp, 0)) {
BO_LOCK(bo);
BUF_UNLOCK(nbp);
continue;
}
if (nbp->b_flags & B_CLUSTEROK) {
vfs_bio_awrite(nbp);
} else {
bremfree(nbp);
bawrite(nbp);
}
dirtybufferflushes++;
break;
}
if (nbp == NULL)
BO_UNLOCK(bo);
}
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* Delayed write. (Buffer is marked dirty). Do not bother writing
* anything if the buffer is marked invalid.
*
* Note that since the buffer must be completely valid, we can safely
* set B_CACHE. In fact, we have to set B_CACHE here rather then in
* biodone() in order to prevent getblk from writing the buffer
* out synchronously.
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
*/
void
stylistic polishing.
2004-09-15 20:54:23 +00:00
bdwrite(struct buf *bp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
struct thread *td = curthread;
struct vnode *vp;
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
struct bufobj *bo;
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
CTR3(KTR_BUF, "bdwrite(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
KASSERT(bp->b_bufobj != NULL, ("No b_bufobj %p", bp));
Add barrier write capability to the VFS buffer interface. A barrier write is a disk write request that tells the disk that the buffer being written must be committed to the media along with any writes that preceeded it before any future blocks may be written to the drive. Barrier writes are provided by adding the functions bbarrierwrite (bwrite with barrier) and babarrierwrite (bawrite with barrier). Following a bbarrierwrite the client knows that the requested buffer is on the media. It does not ensure that buffers written before that buffer are on the media. It only ensure that buffers written before that buffer will get to the media before any buffers written after that buffer. A flush command must be sent to the disk to ensure that all earlier written buffers are on the media. Reviewed by: kib Tested by: Peter Holm
2013-02-16 14:51:30 +00:00
KASSERT((bp->b_flags & B_BARRIER) == 0,
("Barrier request in delayed write %p", bp));
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
Fix a problem with the VN device. Specifically, the VN device can cause a problem of spiraling death due to buffer resource limitations. The vfs_bio code in general had little ability to handle buffer resource management, and now it does. Also, there are a lot more knobs for tuning the vfs_bio code now. The knobs came free because of the need that there always be some immediately available buffers (non-delayed or locked) for use. Note that the buffer cache code is much less likely to get bogged down with lots of delayed writes, even more so than before.
1997-06-15 17:56:53 +00:00
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
if (bp->b_flags & B_INVAL) {
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
brelse(bp);
return;
}
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
/*
* If we have too many dirty buffers, don't create any more.
* If we are wildly over our limit, then force a complete
* cleanup. Otherwise, just keep the situation from getting
When doing cleanup of excessive buffers in bdwrite (see kern/vfs_bio.c delta 1.371) we must ensure that we do not get ourselves into a recursive trap endlessly trying to clean up after ourselves. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 23:59:09 +00:00
* out of control. Note that we have to avoid a recursive
* disaster and not try to clean up after our own cleanup!
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
*/
vp = bp->b_vp;
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
bo = bp->b_bufobj;
Disable nesting of BOP_BDFLUSH(). VOP_FSYNC() call in bdwrite() could result in bdwrite() being reentered, thus causing infinite recursion. Reported and tested by: Peter Holm Reviewed by: tegge MFC after: 2 weeks
2007-04-24 10:59:21 +00:00
if ((td->td_pflags & (TDP_COWINPROGRESS|TDP_INBDFLUSH)) == 0) {
td->td_pflags |= TDP_INBDFLUSH;
Cylinder group bitmaps and blocks containing inode for a snapshot file are after snaplock, while other ffs device buffers are before snaplock in global lock order. By itself, this could cause deadlock when bdwrite() tries to flush dirty buffers on snapshotted ffs. If, during the flush, COW activity for snapshot needs to allocate block and ffs_alloccg() selects the cylinder group that is being written by bdwrite(), then kernel would panic due to recursive buffer lock acquision. Avoid dealing with buffers in bdwrite() that are from other side of snaplock divisor in the lock order then the buffer being written. Add new BOP, bop_bdwrite(), to do dirty buffer flushing for same vnode in the bdwrite(). Default implementation, bufbdflush(), refactors the code from bdwrite(). For ffs device buffers, specialized implementation is used. Reviewed by: tegge, jeff, Russell Cattelan (cattelan xfs org, xfs changes) Tested by: Peter Holm X-MFC after: 3 weeks (if ever: it changes ABI)
2007-01-23 10:01:19 +00:00
BO_BDFLUSH(bo, bp);
Disable nesting of BOP_BDFLUSH(). VOP_FSYNC() call in bdwrite() could result in bdwrite() being reentered, thus causing infinite recursion. Reported and tested by: Peter Holm Reviewed by: tegge MFC after: 2 weeks
2007-04-24 10:59:21 +00:00
td->td_pflags &= ~TDP_INBDFLUSH;
} else
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
recursiveflushes++;
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
bdirty(bp);
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* Set B_CACHE, indicating that the buffer is fully valid. This is
* true even of NFS now.
*/
bp->b_flags |= B_CACHE;
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
/*
* This bmap keeps the system from needing to do the bmap later,
* perhaps when the system is attempting to do a sync. Since it
* is likely that the indirect block -- or whatever other datastructure
* that the filesystem needs is still in memory now, it is a good
* thing to do this. Note also, that if the pageout daemon is
* requesting a sync -- there might not be enough memory to do
* the bmap then... So, this is important to do.
*/
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
if (vp->v_type != VCHR && bp->b_lblkno == bp->b_blkno) {
VOP_BMAP(vp, bp->b_lblkno, NULL, &bp->b_blkno, NULL, NULL);
Fixes from John Dyson to work around vnode lock hang. Basically, remove the VOP_BMAP calls, and add one to bdwrite. Submitted by: John Dyson
1995-03-03 22:13:16 +00:00
}
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
/*
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
* Set the *dirty* buffer range based upon the VM system dirty
* pages.
*
* Mark the buffer pages as clean. We need to do this here to
* satisfy the vnode_pager and the pageout daemon, so that it
* thinks that the pages have been "cleaned". Note that since
* the pages are in a delayed write buffer -- the VFS layer
* "will" see that the pages get written out on the next sync,
* or perhaps the cluster will be completed.
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
*/
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
vfs_clean_pages_dirty_buf(bp);
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
bqrelse(bp);
Fix a problem with the VN device. Specifically, the VN device can cause a problem of spiraling death due to buffer resource limitations. The vfs_bio code in general had little ability to handle buffer resource management, and now it does. Also, there are a lot more knobs for tuning the vfs_bio code now. The knobs came free because of the need that there always be some immediately available buffers (non-delayed or locked) for use. Note that the buffer cache code is much less likely to get bogged down with lots of delayed writes, even more so than before.
1997-06-15 17:56:53 +00:00
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
/*
* note: we cannot initiate I/O from a bdwrite even if we wanted to,
* due to the softdep code.
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
* bdirty:
*
Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new field in struct buf: b_iocmd. The b_iocmd is enforced to have exactly one bit set. B_WRITE was bogusly defined as zero giving rise to obvious coding mistakes. Also eliminate the redundant struct buf flag B_CALL, it can just as efficiently be done by comparing b_iodone to NULL. Should you get a panic or drop into the debugger, complaining about "b_iocmd", don't continue. It is likely to write on your disk where it should have been reading. This change is a step in the direction towards a stackable BIO capability. A lot of this patch were machine generated (Thanks to style(9) compliance!) Vinum users: Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
* Turn buffer into delayed write request. We must clear BIO_READ and
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
* B_RELBUF, and we must set B_DELWRI. We reassign the buffer to
* itself to properly update it in the dirty/clean lists. We mark it
* B_DONE to ensure that any asynchronization of the buffer properly
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* clears B_DONE ( else a panic will occur later ).
*
* bdirty() is kinda like bdwrite() - we have to clear B_INVAL which
* might have been set pre-getblk(). Unlike bwrite/bdwrite, bdirty()
* should only be called if the buffer is known-good.
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
*
* Since the buffer is not on a queue, we do not update the numfreebuffers
* count.
*
* The buffer must be on QUEUE_NONE.
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
*/
void
stylistic polishing.
2004-09-15 20:54:23 +00:00
bdirty(struct buf *bp)
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
{
stylistic polishing.
2004-09-15 20:54:23 +00:00
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
CTR3(KTR_BUF, "bdirty(%p) vp %p flags %X",
bp, bp->b_vp, bp->b_flags);
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
KASSERT(bp->b_bufobj != NULL, ("No b_bufobj %p", bp));
- Eliminate the acquisition and release of the bqlock in bremfree() by setting the B_REMFREE flag in the buf. This is done to prevent lock order reversals with code that must call bremfree() with a local lock held. This also reduces overhead by removing two lock operations per buf for fsync() and similar. - Check for the B_REMFREE flag in brelse() and bqrelse() after the bqlock has been acquired so that we may remove ourself from the free-list. - Provide a bremfreef() function to immediately remove a buf from a free-list for use only by NFS. This is done because the nfsclient code overloads the b_freelist queue for its own async. io queue. - Simplify the numfreebuffers accounting by removing a switch statement that executed the same code in every possible case. - getnewbuf() can encounter locked bufs on free-lists once Giant is removed. Remove a panic associated with this condition and delay asserts that inspect the buf until after it is locked. Reviewed by: phk Sponsored by: Isilon Systems, Inc.
2004-11-18 08:44:09 +00:00
KASSERT(bp->b_flags & B_REMFREE || bp->b_qindex == QUEUE_NONE,
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
("bdirty: buffer %p still on queue %d", bp, bp->b_qindex));
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new field in struct buf: b_iocmd. The b_iocmd is enforced to have exactly one bit set. B_WRITE was bogusly defined as zero giving rise to obvious coding mistakes. Also eliminate the redundant struct buf flag B_CALL, it can just as efficiently be done by comparing b_iodone to NULL. Should you get a panic or drop into the debugger, complaining about "b_iocmd", don't continue. It is likely to write on your disk where it should have been reading. This change is a step in the direction towards a stackable BIO capability. A lot of this patch were machine generated (Thanks to style(9) compliance!) Vinum users: Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
bp->b_flags &= ~(B_RELBUF);
bp->b_iocmd = BIO_WRITE;
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
if ((bp->b_flags & B_DELWRI) == 0) {
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
bp->b_flags |= /* XXX B_DONE | */ B_DELWRI;
Eliminate unused second argument to reassignbuf() and simplify it accordingly.
2004-07-25 21:24:23 +00:00
reassignbuf(bp);
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
bdirtyadd();
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
}
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/*
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
* bundirty:
*
* Clear B_DELWRI for buffer.
*
* Since the buffer is not on a queue, we do not update the numfreebuffers
* count.
*
* The buffer must be on QUEUE_NONE.
*/
void
stylistic polishing.
2004-09-15 20:54:23 +00:00
bundirty(struct buf *bp)
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
{
stylistic polishing.
2004-09-15 20:54:23 +00:00
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
CTR3(KTR_BUF, "bundirty(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
KASSERT(bp->b_bufobj != NULL, ("No b_bufobj %p", bp));
- Eliminate the acquisition and release of the bqlock in bremfree() by setting the B_REMFREE flag in the buf. This is done to prevent lock order reversals with code that must call bremfree() with a local lock held. This also reduces overhead by removing two lock operations per buf for fsync() and similar. - Check for the B_REMFREE flag in brelse() and bqrelse() after the bqlock has been acquired so that we may remove ourself from the free-list. - Provide a bremfreef() function to immediately remove a buf from a free-list for use only by NFS. This is done because the nfsclient code overloads the b_freelist queue for its own async. io queue. - Simplify the numfreebuffers accounting by removing a switch statement that executed the same code in every possible case. - getnewbuf() can encounter locked bufs on free-lists once Giant is removed. Remove a panic associated with this condition and delay asserts that inspect the buf until after it is locked. Reviewed by: phk Sponsored by: Isilon Systems, Inc.
2004-11-18 08:44:09 +00:00
KASSERT(bp->b_flags & B_REMFREE || bp->b_qindex == QUEUE_NONE,
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
("bundirty: buffer %p still on queue %d", bp, bp->b_qindex));
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
if (bp->b_flags & B_DELWRI) {
bp->b_flags &= ~B_DELWRI;
Eliminate unused second argument to reassignbuf() and simplify it accordingly.
2004-07-25 21:24:23 +00:00
reassignbuf(bp);
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
bdirtysub();
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
}
Several performance improvements for soft updates have been added: 1) Fastpath deletions. When a file is being deleted, check to see if it was so recently created that its inode has not yet been written to disk. If so, the delete can proceed to immediately free the inode. 2) Background writes: No file or block allocations can be done while the bitmap is being written to disk. To avoid these stalls, the bitmap is copied to another buffer which is written thus leaving the original available for futher allocations. 3) Link count tracking. Constantly track the difference in i_effnlink and i_nlink so that inodes that have had no change other than i_effnlink need not be written. 4) Identify buffers with rollback dependencies so that the buffer flushing daemon can choose to skip over them.
2000-01-10 00:24:24 +00:00
/*
* Since it is now being written, we can clear its deferred write flag.
*/
bp->b_flags &= ~B_DEFERRED;
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
}
/*
* bawrite:
*
* Asynchronous write. Start output on a buffer, but do not wait for
* it to complete. The buffer is released when the output completes.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* bwrite() ( or the VOP routine anyway ) is responsible for handling
* B_INVAL buffers. Not us.
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
*/
void
stylistic polishing.
2004-09-15 20:54:23 +00:00
bawrite(struct buf *bp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
stylistic polishing.
2004-09-15 20:54:23 +00:00
Added some code to make sure that buffers associated with directories and metadata aren't thrashed by regular file I/O. Added mechanism to limit the amount of outstanding I/O on a given vnode. Pagedaemon wakeup policy changed to skew priority a little in favor of file caching. Slight code reorganization to improve clarity. Added a few more comments. Submitted by: John Dyson
1995-02-22 09:30:13 +00:00
bp->b_flags |= B_ASYNC;
Properly vector all bwrite() and BUF_WRITE() calls through the same path and s/BUF_WRITE()/bwrite()/ since it now does the same as bwrite().
2004-03-11 18:02:36 +00:00
(void) bwrite(bp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Add barrier write capability to the VFS buffer interface. A barrier write is a disk write request that tells the disk that the buffer being written must be committed to the media along with any writes that preceeded it before any future blocks may be written to the drive. Barrier writes are provided by adding the functions bbarrierwrite (bwrite with barrier) and babarrierwrite (bawrite with barrier). Following a bbarrierwrite the client knows that the requested buffer is on the media. It does not ensure that buffers written before that buffer are on the media. It only ensure that buffers written before that buffer will get to the media before any buffers written after that buffer. A flush command must be sent to the disk to ensure that all earlier written buffers are on the media. Reviewed by: kib Tested by: Peter Holm
2013-02-16 14:51:30 +00:00
/*
* babarrierwrite:
*
* Asynchronous barrier write. Start output on a buffer, but do not
* wait for it to complete. Place a write barrier after this write so
* that this buffer and all buffers written before it are committed to
* the disk before any buffers written after this write are committed
* to the disk. The buffer is released when the output completes.
*/
void
babarrierwrite(struct buf *bp)
{
bp->b_flags |= B_ASYNC | B_BARRIER;
(void) bwrite(bp);
}
/*
* bbarrierwrite:
*
* Synchronous barrier write. Start output on a buffer and wait for
* it to complete. Place a write barrier after this write so that
* this buffer and all buffers written before it are committed to
* the disk before any buffers written after this write are committed
* to the disk. The buffer is released when the output completes.
*/
int
bbarrierwrite(struct buf *bp)
{
bp->b_flags |= B_BARRIER;
return (bwrite(bp));
}
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
/*
* bwillwrite:
*
* Called prior to the locking of any vnodes when we are expecting to
* write. We do not want to starve the buffer cache with too many
* dirty buffers so we block here. By blocking prior to the locking
* of any vnodes we attempt to avoid the situation where a locked vnode
* prevents the various system daemons from flushing related buffers.
*/
void
bwillwrite(void)
{
stylistic polishing.
2004-09-15 20:54:23 +00:00
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
if (numdirtybuffers >= hidirtybuffers) {
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_lock(&bdirtylock);
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
while (numdirtybuffers >= hidirtybuffers) {
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
bdirtywait = 1;
msleep(&bdirtywait, &bdirtylock, (PRIBIO + 4),
"flswai", 0);
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
}
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_unlock(&bdirtylock);
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
}
}
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
/*
* Return true if we have too many dirty buffers.
*/
int
buf_dirty_count_severe(void)
{
stylistic polishing.
2004-09-15 20:54:23 +00:00
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
return(numdirtybuffers >= hidirtybuffers);
}
fail(9) support: Add support for kernel fault injection using KFAIL_POINT_* macros and fail_point_* infrastructure. Add example fail point in vfs_bio.c to simulate VM buf pressure. Approved by: dfr (mentor)
2009-05-27 16:36:54 +00:00
static __noinline int
buf_vm_page_count_severe(void)
{
KFAIL_POINT_CODE(DEBUG_FP, buf_pressure, return 1);
return vm_page_count_severe();
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/*
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
* brelse:
*
* Release a busy buffer and, if requested, free its resources. The
* buffer will be stashed in the appropriate bufqueue[] allowing it
* to be accessed later as a cache entity or reused for other purposes.
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
*/
void
stylistic polishing.
2004-09-15 20:54:23 +00:00
brelse(struct buf *bp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
int qindex;
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
CTR3(KTR_BUF, "brelse(%p) vp %p flags %X",
bp, bp->b_vp, bp->b_flags);
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
KASSERT(!(bp->b_flags & (B_CLUSTER|B_PAGING)),
("brelse: inappropriate B_PAGING or B_CLUSTER bp %p", bp));
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
Make recursive getblk() slightly more useful. Keep the buffer state intact if getblk() is done on the already owned buffer. Exit from brelse() early when the lock recursion is detected, otherwise brelse() might prematurely destroy the buffer under some circumstances. Sponsored by: The FreeBSD Foundation Noted by: mckusick Tested by: pho MFC after: 2 weeks
2013-02-27 07:34:09 +00:00
if (BUF_LOCKRECURSED(bp)) {
/*
* Do not process, in particular, do not handle the
* B_INVAL/B_RELBUF and do not release to free list.
*/
BUF_UNLOCK(bp);
return;
}
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
if (bp->b_flags & B_MANAGED) {
bqrelse(bp);
return;
}
Rather than not redirting the bp when we get ENXIO, only redirty it when the error is EIO. This catches a much larger class of errors that are unlikely to succeed if retried. Submitted by: bde
2007-12-30 05:53:45 +00:00
if (bp->b_iocmd == BIO_WRITE && (bp->b_ioflags & BIO_ERROR) &&
bp->b_error == EIO && !(bp->b_flags & B_INVAL)) {
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
Move B_ERROR flag to b_ioflags and call it BIO_ERROR. (Much of this done by script) Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED. Move b_pblkno and b_iodone_chain to struct bio while we transition, they will be obsoleted once bio structs chain/stack. Add bio_queue field for struct bio aware disksort. Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
* Failed write, redirty. Must clear BIO_ERROR to prevent
Rather than not redirting the bp when we get ENXIO, only redirty it when the error is EIO. This catches a much larger class of errors that are unlikely to succeed if retried. Submitted by: bde
2007-12-30 05:53:45 +00:00
* pages from being scrapped. If the error is anything
Eliminate a comment describing code that was deleted over eight years ago. Move another comment to its proper place. Fix a typo in a third comment.
2009-06-01 06:12:08 +00:00
* other than an I/O error (EIO), assume that retrying
Rather than not redirting the bp when we get ENXIO, only redirty it when the error is EIO. This catches a much larger class of errors that are unlikely to succeed if retried. Submitted by: bde
2007-12-30 05:53:45 +00:00
* is futile.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*/
Move B_ERROR flag to b_ioflags and call it BIO_ERROR. (Much of this done by script) Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED. Move b_pblkno and b_iodone_chain to struct bio while we transition, they will be obsoleted once bio structs chain/stack. Add bio_queue field for struct bio aware disksort. Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
bp->b_ioflags &= ~BIO_ERROR;
Don't throw away the buffer contents on a fatal write error; just mark the buffer as still being dirty. This isn't a perfect solution, but throwing away the buffer contents will often result in filesystem corruption and this solution will at least correctly deal with transient errors. Submitted by: Kirk McKusick <mckusick@mckusick.com>
1999-01-22 08:59:05 +00:00
bdirty(bp);
Move B_ERROR flag to b_ioflags and call it BIO_ERROR. (Much of this done by script) Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED. Move b_pblkno and b_iodone_chain to struct bio while we transition, they will be obsoleted once bio structs chain/stack. Add bio_queue field for struct bio aware disksort. Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
} else if ((bp->b_flags & (B_NOCACHE | B_INVAL)) ||
Remove the buffercache/vnode side of BIO_DELETE processing in preparation for integration of p4::phk_bufwork. In the future, local filesystems will talk to GEOM directly and they will consequently be able to issue BIO_DELETE directly. Since the removal of the fla driver, BIO_DELETE has effectively been a no-op anyway.
2004-09-13 06:50:42 +00:00
(bp->b_ioflags & BIO_ERROR) || (bp->b_bufsize <= 0)) {
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* Either a failed I/O or we were asked to free or not
* cache the buffer.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
bp->b_flags |= B_INVAL;
Use LIST_EMPTY() instead of unrolled version (LIST_FIRST() [!=]= NULL)
2007-02-22 14:52:59 +00:00
if (!LIST_EMPTY(&bp->b_dep))
Virtualizes & untangles the bioops operations vector. Ref: Message-ID: <18317.961014572@critter.freebsd.dk> To: current@
2000-06-16 08:48:51 +00:00
buf_deallocate(bp);
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
if (bp->b_flags & B_DELWRI)
bdirtysub();
Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new field in struct buf: b_iocmd. The b_iocmd is enforced to have exactly one bit set. B_WRITE was bogusly defined as zero giving rise to obvious coding mistakes. Also eliminate the redundant struct buf flag B_CALL, it can just as efficiently be done by comparing b_iodone to NULL. Should you get a panic or drop into the debugger, complaining about "b_iocmd", don't continue. It is likely to write on your disk where it should have been reading. This change is a step in the direction towards a stackable BIO capability. A lot of this patch were machine generated (Thanks to style(9) compliance!) Vinum users: Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
bp->b_flags &= ~(B_DELWRI | B_CACHE);
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
if ((bp->b_flags & B_VMIO) == 0) {
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
if (bp->b_bufsize)
allocbuf(bp, 0);
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
if (bp->b_vp)
b_waiters cannot be adequately protected by the interlock because it is dropped after the call to lockmgr() so just revert this approach using something similar to the precedent one: BUF_LOCKWAITERS() just checks if there are waiters (not the actual number of them) and it is based on newly introduced lockmgr_waiters() which returns if the lockmgr has waiters or not. The name has been choosen differently by old lockwaiters() in order to not confuse them. KPI results enriched by this commit so __FreeBSD_version bumping and manpage update will be happening soon. 'struct buf' also changes, so kernel ABI is disturbed. Bug found by: jeff Approved by: jeff, kib
2008-03-28 12:30:12 +00:00
brelvp(bp);
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
}
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
PR: kern/7418 Reviewed by: Luoqi Chen <luoqi@watermarkgroup.com> Fixed problem where write()s can get lost due to buffers flagged B_DELWRI being improperly released in brelse().
1998-09-26 00:12:35 +00:00
/*
* We must clear B_RELBUF if B_DELWRI is set. If vfs_vmio_release()
* is called with B_DELWRI set, the underlying pages may wind up
* getting freed causing a previous write (bdwrite()) to get 'lost'
* because pages associated with a B_DELWRI bp are marked clean.
*
* We still allow the B_INVAL case to call vfs_vmio_release(), even
* if B_DELWRI is set.
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
*
* If B_DELWRI is not set we may have to set B_RELBUF if we are low
* on pages to return pages to the VM page queues.
PR: kern/7418 Reviewed by: Luoqi Chen <luoqi@watermarkgroup.com> Fixed problem where write()s can get lost due to buffers flagged B_DELWRI being improperly released in brelse().
1998-09-26 00:12:35 +00:00
*/
if (bp->b_flags & B_DELWRI)
bp->b_flags &= ~B_RELBUF;
fail(9) support: Add support for kernel fault injection using KFAIL_POINT_* macros and fail_point_* infrastructure. Add example fail point in vfs_bio.c to simulate VM buf pressure. Approved by: dfr (mentor)
2009-05-27 16:36:54 +00:00
else if (buf_vm_page_count_severe()) {
- Move BX_BKGRDWAIT and BX_BKGRDINPROG to BV_ and the b_vflags field. - Surround all accesses of the BKGRD{WAIT,INPROG} flags with the vnode interlock. - Don't use the B_LOCKED flag and QUEUE_LOCKED for background write buffers. Check for the BKGRDINPROG flag before recycling or throwing away a buffer. We do this instead because it is not safe for us to move the original buffer to a new queue from the callback on the background write buffer. - Remove the B_LOCKED flag and the locked buffer queue. They are no longer used. - The vnode interlock is used around checks for BKGRDINPROG where it may not be strictly necessary. If we hold the buf lock the a back-ground write will not be started without our knowledge, one may only be completed while we're not looking. Rather than remove the code, Document two of the places where this extra locking is done. A pass should be done to verify and minimize the locking later.
2003-08-28 06:55:18 +00:00
/*
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
* BKGRDINPROG can only be set with the buf and bufobj
* locks both held. We tolerate a race to clear it here.
- Move BX_BKGRDWAIT and BX_BKGRDINPROG to BV_ and the b_vflags field. - Surround all accesses of the BKGRD{WAIT,INPROG} flags with the vnode interlock. - Don't use the B_LOCKED flag and QUEUE_LOCKED for background write buffers. Check for the BKGRDINPROG flag before recycling or throwing away a buffer. We do this instead because it is not safe for us to move the original buffer to a new queue from the callback on the background write buffer. - Remove the B_LOCKED flag and the locked buffer queue. They are no longer used. - The vnode interlock is used around checks for BKGRDINPROG where it may not be strictly necessary. If we hold the buf lock the a back-ground write will not be started without our knowledge, one may only be completed while we're not looking. Rather than remove the code, Document two of the places where this extra locking is done. A pass should be done to verify and minimize the locking later.
2003-08-28 06:55:18 +00:00
*/
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
if (!(bp->b_vflags & BV_BKGRDINPROG))
- If there is no vp assume that BKGRDINPROG is not set and set RELPBUF in brelse().
2003-08-31 01:07:45 +00:00
bp->b_flags |= B_RELBUF;
- Move BX_BKGRDWAIT and BX_BKGRDINPROG to BV_ and the b_vflags field. - Surround all accesses of the BKGRD{WAIT,INPROG} flags with the vnode interlock. - Don't use the B_LOCKED flag and QUEUE_LOCKED for background write buffers. Check for the BKGRDINPROG flag before recycling or throwing away a buffer. We do this instead because it is not safe for us to move the original buffer to a new queue from the callback on the background write buffer. - Remove the B_LOCKED flag and the locked buffer queue. They are no longer used. - The vnode interlock is used around checks for BKGRDINPROG where it may not be strictly necessary. If we hold the buf lock the a back-ground write will not be started without our knowledge, one may only be completed while we're not looking. Rather than remove the code, Document two of the places where this extra locking is done. A pass should be done to verify and minimize the locking later.
2003-08-28 06:55:18 +00:00
}
PR: kern/7418 Reviewed by: Luoqi Chen <luoqi@watermarkgroup.com> Fixed problem where write()s can get lost due to buffers flagged B_DELWRI being improperly released in brelse().
1998-09-26 00:12:35 +00:00
Only do object paging_in_progress wakeups if someone is waiting on this condition. Added some comments. Submitted by: John Dyson
1995-02-22 09:16:07 +00:00
/*
* VMIO buffer rundown. It is not very necessary to keep a VMIO buffer
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* constituted, not even NFS buffers now. Two flags effect this. If
* B_INVAL, the struct buf is invalidated but the VM object is kept
* around ( i.e. so it is trivial to reconstitute the buffer later ).
Fix a few bugs with NFS and mmap caused by NFS' use of b_validoff and b_validend. The changes to vfs_bio.c are a bit ugly but hopefully can be tidied up later by a slight redesign. PR: kern/2573, kern/2754, kern/3046 (possibly) Reviewed by: dyson
1997-05-19 14:36:56 +00:00
*
Move B_ERROR flag to b_ioflags and call it BIO_ERROR. (Much of this done by script) Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED. Move b_pblkno and b_iodone_chain to struct bio while we transition, they will be obsoleted once bio structs chain/stack. Add bio_queue field for struct bio aware disksort. Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
* If BIO_ERROR or B_NOCACHE is set, pages in the VM object will be
* invalidated. BIO_ERROR cannot be set for a failed write unless the
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* buffer is also B_INVAL because it hits the re-dirtying code above.
Adjust some comments to prevent future confusion on the implementation. Also add a reference to the buf(9) manual page.
1998-12-22 18:57:30 +00:00
*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* Normally we can do this whether a buffer is B_DELWRI or not. If
* the buffer is an NFS buffer, it is tracking piecemeal writes or
Several performance improvements for soft updates have been added: 1) Fastpath deletions. When a file is being deleted, check to see if it was so recently created that its inode has not yet been written to disk. If so, the delete can proceed to immediately free the inode. 2) Background writes: No file or block allocations can be done while the bitmap is being written to disk. To avoid these stalls, the bitmap is copied to another buffer which is written thus leaving the original available for futher allocations. 3) Link count tracking. Constantly track the difference in i_effnlink and i_nlink so that inodes that have had no change other than i_effnlink need not be written. 4) Identify buffers with rollback dependencies so that the buffer flushing daemon can choose to skip over them.
2000-01-10 00:24:24 +00:00
* the commit state and we cannot afford to lose the buffer. If the
* buffer has a background write in progress, we need to keep it
* around to prevent it from being reconstituted and starting a second
* background write.
Only do object paging_in_progress wakeups if someone is waiting on this condition. Added some comments. Submitted by: John Dyson
1995-02-22 09:16:07 +00:00
*/
Fix a few bugs with NFS and mmap caused by NFS' use of b_validoff and b_validend. The changes to vfs_bio.c are a bit ugly but hopefully can be tidied up later by a slight redesign. PR: kern/2573, kern/2754, kern/3046 (possibly) Reviewed by: dyson
1997-05-19 14:36:56 +00:00
if ((bp->b_flags & B_VMIO)
Remove all use of vnode->v_tag, replacing with appropriate substitutes. v_tag is now const char * and should only be used for debugging. Additionally: 1. All users of VT_NTS now check vfsconf->vf_type VFCF_NETWORK 2. The user of VT_PROCFS now checks for the new flag VV_PROCDEP, which is propagated by pseudofs to all child vnodes if the fs sets PFS_PROCDEP. Suggested by: phk Reviewed by: bde, rwatson (earlier version)
2002-09-14 09:02:28 +00:00
&& !(bp->b_vp->v_mount != NULL &&
(bp->b_vp->v_mount->mnt_vfc->vfc_flags & VFCF_NETWORK) != 0 &&
Give vn_isdisk() a second argument where it can return a suitable errno. Suggested by: bde
2000-01-10 12:04:27 +00:00
!vn_isdisk(bp->b_vp, NULL) &&
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
(bp->b_flags & B_DELWRI))
Fix some performance problems with the NFS mmap fixes.
1997-06-03 09:42:43 +00:00
) {
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
int i, j, resid;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
vm_page_t m;
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
off_t foff;
vm_pindex_t poff;
vm_object_t obj;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
Change buf->b_object to buf->b_bufobj->bo_object some whitespace fixes.
2004-11-04 09:06:54 +00:00
obj = bp->b_bufobj->bo_object;
Fix a problem with the VN device. Specifically, the VN device can cause a problem of spiraling death due to buffer resource limitations. The vfs_bio code in general had little ability to handle buffer resource management, and now it does. Also, there are a lot more knobs for tuning the vfs_bio code now. The knobs came free because of the need that there always be some immediately available buffers (non-delayed or locked) for use. Note that the buffer cache code is much less likely to get bogged down with lots of delayed writes, even more so than before.
1997-06-15 17:56:53 +00:00
Adjust some comments to prevent future confusion on the implementation. Also add a reference to the buf(9) manual page.
1998-12-22 18:57:30 +00:00
/*
* Get the base offset and length of the buffer. Note that
Documentation MFC after: 1 day
2001-10-21 06:26:55 +00:00
* in the VMIO case if the buffer block size is not
* page-aligned then b_data pointer may not be page-aligned.
* But our b_pages[] array *IS* page aligned.
Adjust some comments to prevent future confusion on the implementation. Also add a reference to the buf(9) manual page.
1998-12-22 18:57:30 +00:00
*
* block sizes less then DEV_BSIZE (usually 512) are not
* supported due to the page granularity bits (m->valid,
* m->dirty, etc...).
*
* See man buf(9) for more information
*/
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
resid = bp->b_bufsize;
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
foff = bp->b_offset;
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
for (i = 0; i < bp->b_npages; i++) {
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
int had_bogus = 0;
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
m = bp->b_pages[i];
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
/*
* If we hit a bogus page, fixup *all* the bogus pages
* now.
*/
if (m == bogus_page) {
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
poff = OFF_TO_IDX(bp->b_offset);
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
had_bogus = 1;
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
Reduce the scope of the VM object locking in brelse(). In my tests, this change reduced the total number of VM object lock acquisitions by brelse() by 74%. Sponsored by: EMC / Isilon Storage Division
2013-06-02 16:18:03 +00:00
VM_OBJECT_RLOCK(obj);
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
for (j = i; j < bp->b_npages; j++) {
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
vm_page_t mtmp;
mtmp = bp->b_pages[j];
if (mtmp == bogus_page) {
mtmp = vm_page_lookup(obj, poff + j);
if (!mtmp) {
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
panic("brelse: page missing\n");
Two critical bugfixes: 1) "obj" was't initialized properly, resulting in an important vm_page_lookup always failing (resulting in a panic). 2) busy pages could be put on the cache queue or freed (resulting in a panic).
1995-10-01 05:50:27 +00:00
}
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
bp->b_pages[j] = mtmp;
Added some more of John's "anti-chatter" fixes - set the page activation count to 0 after activating the page; the previous behavior biased the pages too high in some cases. Submitted by: John Dyson
1995-03-04 15:16:07 +00:00
}
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
Reduce the scope of the VM object locking in brelse(). In my tests, this change reduced the total number of VM object lock acquisitions by brelse() by 74%. Sponsored by: EMC / Isilon Storage Division
2013-06-02 16:18:03 +00:00
VM_OBJECT_RUNLOCK(obj);
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if ((bp->b_flags & (B_INVAL | B_UNMAPPED)) == 0) {
BUF_CHECK_MAPPED(bp);
stylistic polishing.
2004-09-15 20:54:23 +00:00
pmap_qenter(
Change buf->b_object to buf->b_bufobj->bo_object some whitespace fixes.
2004-11-04 09:06:54 +00:00
trunc_page((vm_offset_t)bp->b_data),
bp->b_pages, bp->b_npages);
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
}
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
m = bp->b_pages[i];
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
}
stylistic polishing.
2004-09-15 20:54:23 +00:00
if ((bp->b_flags & B_NOCACHE) ||
When buffer write is failed, it is wrong for brelse() to invalidate portion of the page that was written. Among other problems, this page might be picked up by pagedaemon, with failed assertion in vm_pageout_flush() about validity of the page. Reported and tested by: pho Approved by: re (kensmith) MFC after: 3 weeks
2009-07-19 20:25:59 +00:00
(bp->b_ioflags & BIO_ERROR &&
bp->b_iocmd == BIO_READ)) {
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
int poffset = foff & PAGE_MASK;
int presid = resid > (PAGE_SIZE - poffset) ?
(PAGE_SIZE - poffset) : resid;
KNFize, by bde.
1999-01-10 01:58:29 +00:00
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
KASSERT(presid >= 0, ("brelse: extra page"));
Reduce the scope of the VM object locking in brelse(). In my tests, this change reduced the total number of VM object lock acquisitions by brelse() by 74%. Sponsored by: EMC / Isilon Storage Division
2013-06-02 16:18:03 +00:00
VM_OBJECT_WLOCK(obj);
Drain for the xbusy state for two places which potentially do pmap_remove_all(). Not doing the drain allows the pmap_enter() to proceed in parallel, making the pmap_remove_all() effects void. The race results in an invalidated page mapped wired by usermode. Reported and tested by: pho Reviewed by: alc Sponsored by: The FreeBSD Foundation Approved by: re (glebius)
2013-09-08 17:51:22 +00:00
while (vm_page_xbusied(m)) {
vm_page_lock(m);
VM_OBJECT_WUNLOCK(obj);
vm_page_busy_sleep(m, "mbncsh");
VM_OBJECT_WLOCK(obj);
}
Do not invalidate page of the B_NOCACHE buffer or buffer after an I/O error if any user wired mappings exist. Doing the invalidation destroys the user wiring. The change is the temporal measure to close the bug, the more proper fix is to delegate the invalidation of the page to upper layers always. Reported and tested by: pho Reviewed by: alc Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2013-07-11 05:36:26 +00:00
if (pmap_page_wired_mappings(m) == 0)
vm_page_set_invalid(m, poffset, presid);
Reduce the scope of the VM object locking in brelse(). In my tests, this change reduced the total number of VM object lock acquisitions by brelse() by 74%. Sponsored by: EMC / Isilon Storage Division
2013-06-02 16:18:03 +00:00
VM_OBJECT_WUNLOCK(obj);
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
if (had_bogus)
printf("avoided corruption bug in bogus_page/brelse code\n");
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
Correctly handle misaligned VMIO buffer (whose start or end offset in the VM object are not page aligned). This should fix the mount_msdos panic after a failed attemp to mount as ffs. Reviewed By: Matthew Dillon <dillon@apollo.backplane.com> Archie Cobbs <archie@whistle.com> Dmitrij Tejblum <dima@tejblum.dnttm.rssi.ru>
1998-12-22 14:43:58 +00:00
resid -= PAGE_SIZE - (foff & PAGE_MASK);
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
foff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
if (bp->b_flags & (B_INVAL | B_RELBUF))
vfs_vmio_release(bp);
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
Various NFS fixes: Make vfs_bio buffer mgmt work better. Buffers were being used after brelse. Make nfs_getpages work independently of other NFS interfaces. This eliminates some difficult recursion problems and decreases pagefault overhead. Remove an erroneous vfs_unbusy_pages. Fix a reentrancy problem, with nfs_vinvalbuf when vnode is already being rundown. Reassignbuf wasn't being called when needed under certain circumstances. (Thanks to Bill Paul for help.)
1998-01-25 06:24:09 +00:00
} else if (bp->b_flags & B_VMIO) {
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
Introduce a global lock for the vm subsystem (vm_mtx). vm_mtx does not recurse and is required for most low level vm operations. faults can not be taken without holding Giant. Memory subsystems can now call the base page allocators safely. Almost all atomic ops were removed as they are covered under the vm mutex. Alpha and ia64 now need to catch up to i386's trap handlers. FFS and NFS have been tested, other filesystems will need minor changes (grabbing the vm lock when twiddling page properties). Reviewed (partially) by: jake, jhb
2001-05-19 01:28:09 +00:00
if (bp->b_flags & (B_INVAL | B_RELBUF)) {
Various NFS fixes: Make vfs_bio buffer mgmt work better. Buffers were being used after brelse. Make nfs_getpages work independently of other NFS interfaces. This eliminates some difficult recursion problems and decreases pagefault overhead. Remove an erroneous vfs_unbusy_pages. Fix a reentrancy problem, with nfs_vinvalbuf when vnode is already being rundown. Reassignbuf wasn't being called when needed under certain circumstances. (Thanks to Bill Paul for help.)
1998-01-25 06:24:09 +00:00
vfs_vmio_release(bp);
Introduce a global lock for the vm subsystem (vm_mtx). vm_mtx does not recurse and is required for most low level vm operations. faults can not be taken without holding Giant. Memory subsystems can now call the base page allocators safely. Almost all atomic ops were removed as they are covered under the vm mutex. Alpha and ia64 now need to catch up to i386's trap handlers. FFS and NFS have been tested, other filesystems will need minor changes (grabbing the vm lock when twiddling page properties). Reviewed (partially) by: jake, jhb
2001-05-19 01:28:09 +00:00
}
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
For low memory situations, non-VMIO buffers didnt't release pages back to the system when brelse() was called with B_RELBUF set on the buffer. This could be a problem when the system was low on memory, had many buffers on QUEUE_EMPTYKVA and started to traverse directories. For each getnewbuf(), pages were allocated from the system, driving the free reserve downwards. For each brelse(), the system put the buffer on QUEUE_CLEAN, with B_INVAL set. This commit changes the semantics of B_RELBUF to also free pages from non-VMIO buffers. Reviewed by: alc
2006-02-02 21:37:39 +00:00
} else if ((bp->b_flags & (B_INVAL | B_RELBUF)) != 0) {
if (bp->b_bufsize != 0)
allocbuf(bp, 0);
if (bp->b_vp != NULL)
b_waiters cannot be adequately protected by the interlock because it is dropped after the call to lockmgr() so just revert this approach using something similar to the precedent one: BUF_LOCKWAITERS() just checks if there are waiters (not the actual number of them) and it is based on newly introduced lockmgr_waiters() which returns if the lockmgr has waiters or not. The name has been choosen differently by old lockwaiters() in order to not confuse them. KPI results enriched by this commit so __FreeBSD_version bumping and manpage update will be happening soon. 'struct buf' also changes, so kernel ABI is disturbed. Bug found by: jeff Approved by: jeff, kib
2008-03-28 12:30:12 +00:00
brelvp(bp);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
Various NFS fixes: Make vfs_bio buffer mgmt work better. Buffers were being used after brelse. Make nfs_getpages work independently of other NFS interfaces. This eliminates some difficult recursion problems and decreases pagefault overhead. Remove an erroneous vfs_unbusy_pages. Fix a reentrancy problem, with nfs_vinvalbuf when vnode is already being rundown. Reassignbuf wasn't being called when needed under certain circumstances. (Thanks to Bill Paul for help.)
1998-01-25 06:24:09 +00:00
Fix an old-standing bug that crept in along the several revisions: B_DELWRI cleanup and vnode disassociation should happen just before to assign the buffer to a queue. Reported by: miwi, Volker <volker at vwsoft dot com>, Ben Kaduk <minimarmot at gmail dot com>, Christopher Mallon <christoph dot mallon at gmx dot de> Tested by: lulf, miwi
2009-03-17 16:30:49 +00:00
/*
* If the buffer has junk contents signal it and eventually
* clean up B_DELWRI and diassociate the vnode so that gbincore()
* doesn't find it.
*/
if (bp->b_bufsize == 0 || (bp->b_ioflags & BIO_ERROR) != 0 ||
(bp->b_flags & (B_INVAL | B_NOCACHE | B_RELBUF)) != 0)
bp->b_flags |= B_INVAL;
if (bp->b_flags & B_INVAL) {
if (bp->b_flags & B_DELWRI)
bundirty(bp);
if (bp->b_vp)
brelvp(bp);
}
Incorporated post 1.1.5 work from John Dyson. This includes performance improvements via the new routines pmap_qenter/pmap_qremove and pmap_kenter/ pmap_kremove. These routine allow fast mapping of pages for those architectures that have "normal" MMUs. Also included is a fix to the pageout daemon to properly check a queue end condition. Submitted by: John Dyson
1994-08-06 09:15:42 +00:00
/* buffers with no memory */
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
if (bp->b_bufsize == 0) {
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
bp->b_xflags &= ~(BX_BKGRDWRITE | BX_ALTDATA);
- Move BX_BKGRDWAIT and BX_BKGRDINPROG to BV_ and the b_vflags field. - Surround all accesses of the BKGRD{WAIT,INPROG} flags with the vnode interlock. - Don't use the B_LOCKED flag and QUEUE_LOCKED for background write buffers. Check for the BKGRDINPROG flag before recycling or throwing away a buffer. We do this instead because it is not safe for us to move the original buffer to a new queue from the callback on the background write buffer. - Remove the B_LOCKED flag and the locked buffer queue. They are no longer used. - The vnode interlock is used around checks for BKGRDINPROG where it may not be strictly necessary. If we hold the buf lock the a back-ground write will not be started without our knowledge, one may only be completed while we're not looking. Rather than remove the code, Document two of the places where this extra locking is done. A pass should be done to verify and minimize the locking later.
2003-08-28 06:55:18 +00:00
if (bp->b_vflags & BV_BKGRDINPROG)
Several performance improvements for soft updates have been added: 1) Fastpath deletions. When a file is being deleted, check to see if it was so recently created that its inode has not yet been written to disk. If so, the delete can proceed to immediately free the inode. 2) Background writes: No file or block allocations can be done while the bitmap is being written to disk. To avoid these stalls, the bitmap is copied to another buffer which is written thus leaving the original available for futher allocations. 3) Link count tracking. Constantly track the difference in i_effnlink and i_nlink so that inodes that have had no change other than i_effnlink need not be written. 4) Identify buffers with rollback dependencies so that the buffer flushing daemon can choose to skip over them.
2000-01-10 00:24:24 +00:00
panic("losing buffer 1");
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
if (bp->b_kvasize)
qindex = QUEUE_EMPTYKVA;
else
qindex = QUEUE_EMPTY;
bp->b_flags |= B_AGE;
Fix a problem with the VN device. Specifically, the VN device can cause a problem of spiraling death due to buffer resource limitations. The vfs_bio code in general had little ability to handle buffer resource management, and now it does. Also, there are a lot more knobs for tuning the vfs_bio code now. The knobs came free because of the need that there always be some immediately available buffers (non-delayed or locked) for use. Note that the buffer cache code is much less likely to get bogged down with lots of delayed writes, even more so than before.
1997-06-15 17:56:53 +00:00
/* buffers with junk contents */
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
} else if (bp->b_flags & (B_INVAL | B_NOCACHE | B_RELBUF) ||
(bp->b_ioflags & BIO_ERROR)) {
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
bp->b_xflags &= ~(BX_BKGRDWRITE | BX_ALTDATA);
- Move BX_BKGRDWAIT and BX_BKGRDINPROG to BV_ and the b_vflags field. - Surround all accesses of the BKGRD{WAIT,INPROG} flags with the vnode interlock. - Don't use the B_LOCKED flag and QUEUE_LOCKED for background write buffers. Check for the BKGRDINPROG flag before recycling or throwing away a buffer. We do this instead because it is not safe for us to move the original buffer to a new queue from the callback on the background write buffer. - Remove the B_LOCKED flag and the locked buffer queue. They are no longer used. - The vnode interlock is used around checks for BKGRDINPROG where it may not be strictly necessary. If we hold the buf lock the a back-ground write will not be started without our knowledge, one may only be completed while we're not looking. Rather than remove the code, Document two of the places where this extra locking is done. A pass should be done to verify and minimize the locking later.
2003-08-28 06:55:18 +00:00
if (bp->b_vflags & BV_BKGRDINPROG)
Several performance improvements for soft updates have been added: 1) Fastpath deletions. When a file is being deleted, check to see if it was so recently created that its inode has not yet been written to disk. If so, the delete can proceed to immediately free the inode. 2) Background writes: No file or block allocations can be done while the bitmap is being written to disk. To avoid these stalls, the bitmap is copied to another buffer which is written thus leaving the original available for futher allocations. 3) Link count tracking. Constantly track the difference in i_effnlink and i_nlink so that inodes that have had no change other than i_effnlink need not be written. 4) Identify buffers with rollback dependencies so that the buffer flushing daemon can choose to skip over them.
2000-01-10 00:24:24 +00:00
panic("losing buffer 2");
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
qindex = QUEUE_CLEAN;
bp->b_flags |= B_AGE;
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
/* remaining buffers */
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
} else if (bp->b_flags & B_DELWRI)
qindex = QUEUE_DIRTY;
else
qindex = QUEUE_CLEAN;
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
binsfree(bp, qindex);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
The IO_NOWDRAIN and B_NOWDRAIN hacks are no longer needed to prevent deadlocks with vnode backed md(4) devices because md now uses a kthread to run the bio requests instead of doing it directly from the bio down path.
2003-05-31 16:42:45 +00:00
bp->b_flags &= ~(B_ASYNC | B_NOCACHE | B_AGE | B_RELBUF | B_DIRECT);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if ((bp->b_flags & B_DELWRI) == 0 && (bp->b_xflags & BX_VNDIRTY))
panic("brelse: not dirty");
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
/* unlock */
BUF_UNLOCK(bp);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
/*
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
* Release a buffer back to the appropriate queue but do not try to free
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
* it. The buffer is expected to be used again soon.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* bqrelse() is used by bdwrite() to requeue a delayed write, and used by
* biodone() to requeue an async I/O on completion. It is also used when
* known good buffers need to be requeued but we think we may need the data
* again soon.
This patch implements O_DIRECT about 80% of the way. It takes a patchset Tor created a while ago, removes the raw I/O piece (that has cache coherency problems), and adds a buffer cache / VM freeing piece. Essentially this patch causes O_DIRECT I/O to not be left in the cache, but does not prevent it from going through the cache, hence the 80%. For the last 20% we need a method by which the I/O can be issued directly to buffer supplied by the user process and bypass the buffer cache entirely, but still maintain cache coherency. I also have the code working under -stable but the changes made to sys/file.h may not be MFCable, so an MFC is not on the table yet. Submitted by: tegge, dillon
2001-05-24 07:22:27 +00:00
*
* XXX we should be able to leave the B_RELBUF hint set on completion.
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
*/
void
stylistic polishing.
2004-09-15 20:54:23 +00:00
bqrelse(struct buf *bp)
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
{
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
int qindex;
The buffers b_vflags field is not always properly protected by bufobj lock. If b_bufobj is not NULL, then bufobj lock should be held when manipulating the flags. Not doing this sometimes leaves BV_BKGRDINPROG to be erronously set, causing softdep' getdirtybuf() to stuck indefinitely in "getbuf" sleep, waiting for background write to finish which is not actually performed. Add BO_LOCK() in the cases where it was missed. In collaboration with: pho Tested by: bz Reviewed by: jeff MFC after: 1 month
2010-08-12 08:36:23 +00:00
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
CTR3(KTR_BUF, "bqrelse(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
stylistic polishing.
2004-09-15 20:54:23 +00:00
KASSERT(!(bp->b_flags & (B_CLUSTER|B_PAGING)),
("bqrelse: inappropriate B_PAGING or B_CLUSTER bp %p", bp));
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
- Introduce the function lockmgr_recursed() which returns true if the lockmgr lkp, when held in exclusive mode, is recursed - Introduce the function BUF_RECURSED() which does the same for bufobj locks based on the top of lockmgr_recursed() - Introduce the function BUF_ISLOCKED() which works like the counterpart VOP_ISLOCKED(9), showing the state of lockmgr linked with the bufobj BUF_RECURSED() and BUF_ISLOCKED() entirely replace the usage of bogus BUF_REFCNT() in a more explicative and SMP-compliant way. This allows us to axe out BUF_REFCNT() and leaving the function lockcount() totally unused in our stock kernel. Further commits will axe lockcount() as well as part of lockmgr() cleanup. KPI results, obviously, broken so further commits will update manpages and freebsd version. Tested by: kris (on UFS and NFS)
2008-01-19 17:36:23 +00:00
if (BUF_LOCKRECURSED(bp)) {
Convert buffer locking from using the B_BUSY and B_WANTED flags to using lockmgr locks. This commit should be functionally equivalent to the old semantics. That is, all buffer locking is done with LK_EXCLUSIVE requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will be done in future commits.
1999-06-26 02:47:16 +00:00
/* do not release to free list */
BUF_UNLOCK(bp);
return;
}
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
bp->b_flags &= ~(B_ASYNC | B_NOCACHE | B_AGE | B_RELBUF);
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
if (bp->b_flags & B_MANAGED) {
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
if (bp->b_flags & B_REMFREE)
bremfreef(bp);
goto out;
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
}
- Move BX_BKGRDWAIT and BX_BKGRDINPROG to BV_ and the b_vflags field. - Surround all accesses of the BKGRD{WAIT,INPROG} flags with the vnode interlock. - Don't use the B_LOCKED flag and QUEUE_LOCKED for background write buffers. Check for the BKGRDINPROG flag before recycling or throwing away a buffer. We do this instead because it is not safe for us to move the original buffer to a new queue from the callback on the background write buffer. - Remove the B_LOCKED flag and the locked buffer queue. They are no longer used. - The vnode interlock is used around checks for BKGRDINPROG where it may not be strictly necessary. If we hold the buf lock the a back-ground write will not be started without our knowledge, one may only be completed while we're not looking. Rather than remove the code, Document two of the places where this extra locking is done. A pass should be done to verify and minimize the locking later.
2003-08-28 06:55:18 +00:00
/* buffers with stale but valid contents */
if (bp->b_flags & B_DELWRI) {
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
qindex = QUEUE_DIRTY;
- Move BX_BKGRDWAIT and BX_BKGRDINPROG to BV_ and the b_vflags field. - Surround all accesses of the BKGRD{WAIT,INPROG} flags with the vnode interlock. - Don't use the B_LOCKED flag and QUEUE_LOCKED for background write buffers. Check for the BKGRDINPROG flag before recycling or throwing away a buffer. We do this instead because it is not safe for us to move the original buffer to a new queue from the callback on the background write buffer. - Remove the B_LOCKED flag and the locked buffer queue. They are no longer used. - The vnode interlock is used around checks for BKGRDINPROG where it may not be strictly necessary. If we hold the buf lock the a back-ground write will not be started without our knowledge, one may only be completed while we're not looking. Rather than remove the code, Document two of the places where this extra locking is done. A pass should be done to verify and minimize the locking later.
2003-08-28 06:55:18 +00:00
} else {
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
if ((bp->b_flags & B_DELWRI) == 0 &&
(bp->b_xflags & BX_VNDIRTY))
panic("bqrelse: not dirty");
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
/*
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
* BKGRDINPROG can only be set with the buf and bufobj
* locks both held. We tolerate a race to clear it here.
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
*/
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
if (buf_vm_page_count_severe() &&
(bp->b_vflags & BV_BKGRDINPROG) == 0) {
- Move BX_BKGRDWAIT and BX_BKGRDINPROG to BV_ and the b_vflags field. - Surround all accesses of the BKGRD{WAIT,INPROG} flags with the vnode interlock. - Don't use the B_LOCKED flag and QUEUE_LOCKED for background write buffers. Check for the BKGRDINPROG flag before recycling or throwing away a buffer. We do this instead because it is not safe for us to move the original buffer to a new queue from the callback on the background write buffer. - Remove the B_LOCKED flag and the locked buffer queue. They are no longer used. - The vnode interlock is used around checks for BKGRDINPROG where it may not be strictly necessary. If we hold the buf lock the a back-ground write will not be started without our knowledge, one may only be completed while we're not looking. Rather than remove the code, Document two of the places where this extra locking is done. A pass should be done to verify and minimize the locking later.
2003-08-28 06:55:18 +00:00
/*
* We are too low on memory, we have to try to free
* the buffer (most importantly: the wired pages
* making up its backing store) *now*.
*/
brelse(bp);
return;
}
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
qindex = QUEUE_CLEAN;
Fix a problem with the VN device. Specifically, the VN device can cause a problem of spiraling death due to buffer resource limitations. The vfs_bio code in general had little ability to handle buffer resource management, and now it does. Also, there are a lot more knobs for tuning the vfs_bio code now. The knobs came free because of the need that there always be some immediately available buffers (non-delayed or locked) for use. Note that the buffer cache code is much less likely to get bogged down with lots of delayed writes, even more so than before.
1997-06-15 17:56:53 +00:00
}
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
binsfree(bp, qindex);
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
out:
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
/* unlock */
BUF_UNLOCK(bp);
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
}
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
/* Give pages used by the bp back to the VM system (where possible) */
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
static void
stylistic polishing.
2004-09-15 20:54:23 +00:00
vfs_vmio_release(struct buf *bp)
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
{
- Always call bfreekva() w/o vm_mtx held. - Always call vfs_setdirty() with vm_mtx held. - Fix an old comment: vm_hold_unload_pages is called vm_hold_free_pages() nowadays. - Always call vm_hold_free_pages() w/o vm_mtx held.
2001-05-23 22:24:49 +00:00
int i;
Fix an spl window, a page manipulation at interrupt time that was incorrect, and correct the support for B_ORDERED. The spl window fix was from Peter Wemm, and his questions led me to find the problem with the interrupt time page manipulation.
1996-09-20 02:26:35 +00:00
vm_page_t m;
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if ((bp->b_flags & B_UNMAPPED) == 0) {
BUF_CHECK_MAPPED(bp);
pmap_qremove(trunc_page((vm_offset_t)bp->b_data), bp->b_npages);
} else
BUF_CHECK_UNMAPPED(bp);
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WLOCK(bp->b_bufobj->bo_object);
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
for (i = 0; i < bp->b_npages; i++) {
m = bp->b_pages[i];
bp->b_pages[i] = NULL;
Unwire everything to the inactive queue in order to preserve LRU ordering.
1998-10-30 14:53:54 +00:00
/*
* In order to keep page LRU ordering consistent, put
* everything on the inactive queue.
*/
Properly synchronize access to the page's hold_count in vfs_vmio_release(). Reviewed by: kib
2010-05-02 19:10:27 +00:00
vm_page_lock(m);
Unwire everything to the inactive queue in order to preserve LRU ordering.
1998-10-30 14:53:54 +00:00
vm_page_unwire(m, 0);
The soft and hard busy mechanism rely on the vm object lock to work. Unify the 2 concept into a real, minimal, sxlock where the shared acquisition represent the soft busy and the exclusive acquisition represent the hard busy. The old VPO_WANTED mechanism becames the hard-path for this new lock and it becomes per-page rather than per-object. The vm_object lock becames an interlock for this functionality: it can be held in both read or write mode. However, if the vm_object lock is held in read mode while acquiring or releasing the busy state, the thread owner cannot make any assumption on the busy state unless it is also busying it. Also: - Add a new flag to directly shared busy pages while vm_page_alloc and vm_page_grab are being executed. This will be very helpful once these functions happen under a read object lock. - Move the swapping sleep into its own per-object flag The KPI is heavilly changed this is why the version is bumped. It is very likely that some VM ports users will need to change their own code. Sponsored by: EMC / Isilon storage division Discussed with: alc Reviewed by: jeff, kib Tested by: gavin, bapt (older version) Tested by: pho, scottl
2013-08-09 11:11:11 +00:00
Fix a problem that could cause msync (or many other things) to deadlock. The heuristic for managment of memory backing the buffer cache was nice, but didn't work due to some architectural problems. Simplify and improve the algorithm.
1996-10-17 03:04:43 +00:00
/*
The soft and hard busy mechanism rely on the vm object lock to work. Unify the 2 concept into a real, minimal, sxlock where the shared acquisition represent the soft busy and the exclusive acquisition represent the hard busy. The old VPO_WANTED mechanism becames the hard-path for this new lock and it becomes per-page rather than per-object. The vm_object lock becames an interlock for this functionality: it can be held in both read or write mode. However, if the vm_object lock is held in read mode while acquiring or releasing the busy state, the thread owner cannot make any assumption on the busy state unless it is also busying it. Also: - Add a new flag to directly shared busy pages while vm_page_alloc and vm_page_grab are being executed. This will be very helpful once these functions happen under a read object lock. - Move the swapping sleep into its own per-object flag The KPI is heavilly changed this is why the version is bumped. It is very likely that some VM ports users will need to change their own code. Sponsored by: EMC / Isilon storage division Discussed with: alc Reviewed by: jeff, kib Tested by: gavin, bapt (older version) Tested by: pho, scottl
2013-08-09 11:11:11 +00:00
* Might as well free the page if we can and it has
* no valid data. We also free the page if the
* buffer was used for direct I/O
Fix a problem that could cause msync (or many other things) to deadlock. The heuristic for managment of memory backing the buffer cache was nice, but didn't work due to some architectural problems. Simplify and improve the algorithm.
1996-10-17 03:04:43 +00:00
*/
The soft and hard busy mechanism rely on the vm object lock to work. Unify the 2 concept into a real, minimal, sxlock where the shared acquisition represent the soft busy and the exclusive acquisition represent the hard busy. The old VPO_WANTED mechanism becames the hard-path for this new lock and it becomes per-page rather than per-object. The vm_object lock becames an interlock for this functionality: it can be held in both read or write mode. However, if the vm_object lock is held in read mode while acquiring or releasing the busy state, the thread owner cannot make any assumption on the busy state unless it is also busying it. Also: - Add a new flag to directly shared busy pages while vm_page_alloc and vm_page_grab are being executed. This will be very helpful once these functions happen under a read object lock. - Move the swapping sleep into its own per-object flag The KPI is heavilly changed this is why the version is bumped. It is very likely that some VM ports users will need to change their own code. Sponsored by: EMC / Isilon storage division Discussed with: alc Reviewed by: jeff, kib Tested by: gavin, bapt (older version) Tested by: pho, scottl
2013-08-09 11:11:11 +00:00
if ((bp->b_flags & B_ASYNC) == 0 && !m->valid) {
if (m->wire_count == 0 && !vm_page_busied(m))
Unwire everything to the inactive queue in order to preserve LRU ordering.
1998-10-30 14:53:54 +00:00
vm_page_free(m);
The soft and hard busy mechanism rely on the vm object lock to work. Unify the 2 concept into a real, minimal, sxlock where the shared acquisition represent the soft busy and the exclusive acquisition represent the hard busy. The old VPO_WANTED mechanism becames the hard-path for this new lock and it becomes per-page rather than per-object. The vm_object lock becames an interlock for this functionality: it can be held in both read or write mode. However, if the vm_object lock is held in read mode while acquiring or releasing the busy state, the thread owner cannot make any assumption on the busy state unless it is also busying it. Also: - Add a new flag to directly shared busy pages while vm_page_alloc and vm_page_grab are being executed. This will be very helpful once these functions happen under a read object lock. - Move the swapping sleep into its own per-object flag The KPI is heavilly changed this is why the version is bumped. It is very likely that some VM ports users will need to change their own code. Sponsored by: EMC / Isilon storage division Discussed with: alc Reviewed by: jeff, kib Tested by: gavin, bapt (older version) Tested by: pho, scottl
2013-08-09 11:11:11 +00:00
} else if (bp->b_flags & B_DIRECT)
vm_page_try_to_free(m);
else if (buf_vm_page_count_severe())
vm_page_try_to_cache(m);
Properly synchronize access to the page's hold_count in vfs_vmio_release(). Reviewed by: kib
2010-05-02 19:10:27 +00:00
vm_page_unlock(m);
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
}
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WUNLOCK(bp->b_bufobj->bo_object);
Introduce a global lock for the vm subsystem (vm_mtx). vm_mtx does not recurse and is required for most low level vm operations. faults can not be taken without holding Giant. Memory subsystems can now call the base page allocators safely. Almost all atomic ops were removed as they are covered under the vm mutex. Alpha and ia64 now need to catch up to i386's trap handlers. FFS and NFS have been tested, other filesystems will need minor changes (grabbing the vm lock when twiddling page properties). Reviewed (partially) by: jake, jhb
2001-05-19 01:28:09 +00:00
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
if (bp->b_bufsize) {
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
bufspacewakeup();
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
bp->b_bufsize = 0;
}
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
bp->b_npages = 0;
bp->b_flags &= ~B_VMIO;
if (bp->b_vp)
b_waiters cannot be adequately protected by the interlock because it is dropped after the call to lockmgr() so just revert this approach using something similar to the precedent one: BUF_LOCKWAITERS() just checks if there are waiters (not the actual number of them) and it is based on newly introduced lockmgr_waiters() which returns if the lockmgr has waiters or not. The name has been choosen differently by old lockwaiters() in order to not confuse them. KPI results enriched by this commit so __FreeBSD_version bumping and manpage update will be happening soon. 'struct buf' also changes, so kernel ABI is disturbed. Bug found by: jeff Approved by: jeff, kib
2008-03-28 12:30:12 +00:00
brelvp(bp);
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
}
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
/*
* Check to see if a block at a particular lbn is available for a clustered
* write.
*/
static int
vfs_bio_clcheck(struct vnode *vp, int size, daddr_t lblkno, daddr_t blkno)
{
struct buf *bpa;
int match;
match = 0;
/* If the buf isn't in core skip it */
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
if ((bpa = gbincore(&vp->v_bufobj, lblkno)) == NULL)
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
return (0);
/* If the buf is busy we don't want to wait for it */
- Add an interlock argument to BUF_LOCK and BUF_TIMELOCK. - Remove the buftimelock mutex and acquire the buf's interlock to protect these fields instead. - Hold the vnode interlock while locking bufs on the clean/dirty queues. This reduces some cases from one BUF_LOCK with a LK_NOWAIT and another BUF_LOCK with a LK_TIMEFAIL to a single lock. Reviewed by: arch, mckusick
2003-02-25 03:37:48 +00:00
if (BUF_LOCK(bpa, LK_EXCLUSIVE | LK_NOWAIT, NULL) != 0)
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
return (0);
/* Only cluster with valid clusterable delayed write buffers */
if ((bpa->b_flags & (B_DELWRI | B_CLUSTEROK | B_INVAL)) !=
(B_DELWRI | B_CLUSTEROK))
goto done;
if (bpa->b_bufsize != size)
goto done;
/*
* Check to see if it is in the expected place on disk and that the
* block has been mapped.
*/
if ((bpa->b_blkno != bpa->b_lblkno) && (bpa->b_blkno == blkno))
match = 1;
done:
BUF_UNLOCK(bpa);
return (match);
}
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
/*
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
* vfs_bio_awrite:
*
* Implement clustered async writes for clearing out B_DELWRI buffers.
* This is much better then the old way of writing only one buffer at
* a time. Note that we may not be presented with the buffers in the
* correct order, so we search for the cluster in both directions.
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
*/
Changes to support 1Tb filesizes. Pages are now named by an (object,index) pair instead of (object,offset) pair.
1995-12-11 04:58:34 +00:00
int
stylistic polishing.
2004-09-15 20:54:23 +00:00
vfs_bio_awrite(struct buf *bp)
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
{
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
struct bufobj *bo;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
int i;
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
int j;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
daddr_t lblkno = bp->b_lblkno;
struct vnode *vp = bp->b_vp;
int ncl;
Changes to support 1Tb filesizes. Pages are now named by an (object,index) pair instead of (object,offset) pair.
1995-12-11 04:58:34 +00:00
int nwritten;
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
int size;
int maxcl;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
int gbflags;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
bo = &vp->v_bufobj;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
gbflags = (bp->b_flags & B_UNMAPPED) != 0 ? GB_UNMAPPED : 0;
Fix a problem that was caused by new (partial) support for merged cache metadata and VBLK type devices. The code is currently mostly disabled, and a work-around has been added to disabled attempted clustered writes for VBLK type device buffers. Clustered write of meta-data is currently a work in progress.
1995-12-13 03:47:01 +00:00
/*
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
* right now we support clustered writing only to regular files. If
* we find a clusterable block we could be in the middle of a cluster
* rather then at the beginning.
Fix a problem that was caused by new (partial) support for merged cache metadata and VBLK type devices. The code is currently mostly disabled, and a work-around has been added to disabled attempted clustered writes for VBLK type device buffers. Clustered write of meta-data is currently a work in progress.
1995-12-13 03:47:01 +00:00
*/
if ((vp->v_type == VREG) &&
(vp->v_mount != 0) && /* Only on nodes that have the size info */
Minor optimization.
1995-08-24 13:28:16 +00:00
(bp->b_flags & (B_CLUSTEROK | B_INVAL)) == B_CLUSTEROK) {
Changes to support 1Tb filesizes. Pages are now named by an (object,index) pair instead of (object,offset) pair.
1995-12-11 04:58:34 +00:00
size = vp->v_mount->mnt_stat.f_iosize;
maxcl = MAXPHYS / size;
Fixed a variety of deadlock and panic bugs, removed the bypass code, and implemented the ability to limit bufferspace by memory consumed. (vfs_bio.c) Fixed recently introduced bugs that caused extra I/O to happen in some cases. (vfs_cluster.c) Submitted by: John Dyson
1995-01-24 10:00:46 +00:00
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
BO_RLOCK(bo);
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
for (i = 1; i < maxcl; i++)
if (vfs_bio_clcheck(vp, size, lblkno + i,
bp->b_blkno + ((i * size) >> DEV_BSHIFT)) == 0)
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
break;
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
for (j = 1; i + j <= maxcl && j <= lblkno; j++)
if (vfs_bio_clcheck(vp, size, lblkno - j,
bp->b_blkno - ((j * size) >> DEV_BSHIFT)) == 0)
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
break;
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
BO_RUNLOCK(bo);
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
--j;
ncl = i + j;
MFS doesn't bother to associate a struct mount with the vnode...so work around this by not trying to cluster this type of I/O. Submitted by: John Dyson
1995-01-11 01:53:18 +00:00
/*
* this is a possible cluster write
*/
if (ncl != 1) {
- Remove a race between fsync like functions and flushbufqueues() by requiring locked bufs in vfs_bio_awrite(). Previously the buf could have been written out by fsync before we acquired the buf lock if it weren't for giant. The cluster_wbuild() handles this race properly but the single write at the end of vfs_bio_awrite() would not. - Modify flushbufqueues() so there is only one copy of the loop. Pass a parameter in that says whether or not we should sync bufs with deps. - Call flushbufqueues() a second time and then break if we couldn't find any bufs without deps.
2003-03-13 07:19:23 +00:00
BUF_UNLOCK(bp);
Add currently unused flag argument to the cluster_read(), cluster_write() and cluster_wbuild() functions. The flags to be allowed are a subset of the GB_* flags for getblk(). Sponsored by: The FreeBSD Foundation Tested by: pho
2013-03-14 20:28:26 +00:00
nwritten = cluster_wbuild(vp, size, lblkno - j, ncl,
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
gbflags);
Add currently unused flag argument to the cluster_read(), cluster_write() and cluster_wbuild() functions. The flags to be allowed are a subset of the GB_* flags for getblk(). Sponsored by: The FreeBSD Foundation Tested by: pho
2013-03-14 20:28:26 +00:00
return (nwritten);
MFS doesn't bother to associate a struct mount with the vnode...so work around this by not trying to cluster this type of I/O. Submitted by: John Dyson
1995-01-11 01:53:18 +00:00
}
Tie up some loose ends in vnode/object management. Remove an unneeded config option in pmap. Fix a problem with faulting in pages. Clean-up some loose ends in swap pager memory management. The system should be much more stable, but all subtile bugs aren't fixed yet.
1998-01-17 09:17:02 +00:00
}
General fixes to the vfs clustring code: 1) Make cluster buffer list be a non-malloced chain. This eliminates yet another 'evil' M_WAITOK and generally cleans up the code. 2) Fix write clustering for ext2fs. It was just broken. Also, ffs clustering had an efficiency problem that more bawrites were happening than should have been. 3) Make changes to buf.h to support the above, plus remove b_pfcent at the request of David Greenman. Reviewed by: davidg (partially)
1995-11-19 19:54:31 +00:00
bremfree(bp);
Convert buffer locking from using the B_BUSY and B_WANTED flags to using lockmgr locks. This commit should be functionally equivalent to the old semantics. That is, all buffer locking is done with LK_EXCLUSIVE requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will be done in future commits.
1999-06-26 02:47:16 +00:00
bp->b_flags |= B_ASYNC;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
/*
MFS doesn't bother to associate a struct mount with the vnode...so work around this by not trying to cluster this type of I/O. Submitted by: John Dyson
1995-01-11 01:53:18 +00:00
* default (old) behavior, writing out only one block
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* XXX returns b_bufsize instead of b_bcount for nwritten?
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
*/
Changes to support 1Tb filesizes. Pages are now named by an (object,index) pair instead of (object,offset) pair.
1995-12-11 04:58:34 +00:00
nwritten = bp->b_bufsize;
Properly vector all bwrite() and BUF_WRITE() calls through the same path and s/BUF_WRITE()/bwrite()/ since it now does the same as bwrite().
2004-03-11 18:02:36 +00:00
(void) bwrite(bp);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
Some style fixes. Sponsored by: The FreeBSD Foundation
2013-03-14 20:31:39 +00:00
return (nwritten);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
static void
setbufkva(struct buf *bp, vm_offset_t addr, int maxsize, int gbflags)
{
KASSERT((bp->b_flags & (B_UNMAPPED | B_KVAALLOC)) == 0 &&
bp->b_kvasize == 0, ("call bfreekva(%p)", bp));
if ((gbflags & GB_UNMAPPED) == 0) {
bp->b_kvabase = (caddr_t)addr;
} else if ((gbflags & GB_KVAALLOC) != 0) {
KASSERT((gbflags & GB_UNMAPPED) != 0,
("GB_KVAALLOC without GB_UNMAPPED"));
bp->b_kvaalloc = (caddr_t)addr;
bp->b_flags |= B_UNMAPPED | B_KVAALLOC;
atomic_add_long(&unmapped_bufspace, bp->b_kvasize);
}
bp->b_kvasize = maxsize;
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/*
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
* Allocate the buffer KVA and set b_kvasize. Also set b_kvabase if
* needed.
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
*/
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
static int
allocbufkva(struct buf *bp, int maxsize, int gbflags)
{
vm_offset_t addr;
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
bfreekva(bp);
addr = 0;
- Add a general purpose resource allocator, vmem, from NetBSD. It was originally inspired by the Solaris vmem detailed in the proceedings of usenix 2001. The NetBSD version was heavily refactored for bugs and simplicity. - Use this resource allocator to allocate the buffer and transient maps. Buffer cache defrags are reduced by 25% when used by filesystems with mixed block sizes. Ultimately this may permit dynamic buffer cache sizing on low KVA machines. Discussed with: alc, kib, attilio Tested by: pho Sponsored by: EMC / Isilon Storage Division
2013-06-28 03:51:20 +00:00
if (vmem_alloc(buffer_arena, maxsize, M_BESTFIT | M_NOWAIT, &addr)) {
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
/*
* Buffer map is too fragmented. Request the caller
* to defragment the map.
*/
atomic_add_int(&bufdefragcnt, 1);
return (1);
}
setbufkva(bp, addr, maxsize, gbflags);
atomic_add_long(&bufspace, bp->b_kvasize);
return (0);
}
/*
* Ask the bufdaemon for help, or act as bufdaemon itself, when a
* locked vnode is supplied.
*/
static void
getnewbuf_bufd_help(struct vnode *vp, int gbflags, int slpflag, int slptimeo,
int defrag)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
struct thread *td;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
char *waitmsg;
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
int cnt, error, flags, norunbuf, wait;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_assert(&bqclean, MA_OWNED);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if (defrag) {
flags = VFS_BIO_NEED_BUFSPACE;
waitmsg = "nbufkv";
} else if (bufspace >= hibufspace) {
waitmsg = "nbufbs";
flags = VFS_BIO_NEED_BUFSPACE;
} else {
waitmsg = "newbuf";
flags = VFS_BIO_NEED_ANY;
}
mtx_lock(&nblock);
needsbuffer |= flags;
mtx_unlock(&nblock);
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_unlock(&bqclean);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
bd_speedup(); /* heeeelp */
if ((gbflags & GB_NOWAIT_BD) != 0)
return;
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
td = curthread;
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
cnt = 0;
wait = MNT_NOWAIT;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
mtx_lock(&nblock);
while (needsbuffer & flags) {
The device vnodes are often unlocked when bread() or bwrite() is called. This probably should be fixed eventually, but for now it is not needed to try to flush such vnodes from the buffer allocation context. Reported and tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 1 week Approved by: re (gjb)
2013-10-09 18:45:01 +00:00
if (vp != NULL && vp->v_type != VCHR &&
(td->td_pflags & TDP_BUFNEED) == 0) {
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
mtx_unlock(&nblock);
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
/*
* getblk() is called with a vnode locked, and
* some majority of the dirty buffers may as
* well belong to the vnode. Flushing the
* buffers there would make a progress that
* cannot be achieved by the buf_daemon, that
* cannot lock the vnode.
*/
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
if (cnt++ > 2)
wait = MNT_WAIT;
ASSERT_VOP_LOCKED(vp, "bufd_helper");
error = VOP_ISLOCKED(vp) == LK_EXCLUSIVE ? 0 :
vn_lock(vp, LK_TRYUPGRADE);
if (error == 0) {
/* play bufdaemon */
norunbuf = curthread_pflags_set(TDP_BUFNEED |
TDP_NORUNNINGBUF);
VOP_FSYNC(vp, wait, td);
atomic_add_long(&notbufdflushes, 1);
curthread_pflags_restore(norunbuf);
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
mtx_lock(&nblock);
if ((needsbuffer & flags) == 0)
break;
}
if (msleep(&needsbuffer, &nblock, (PRIBIO + 4) | slpflag,
waitmsg, slptimeo))
break;
}
mtx_unlock(&nblock);
}
static void
getnewbuf_reuse_bp(struct buf *bp, int qindex)
{
CTR6(KTR_BUF, "getnewbuf(%p) vp %p flags %X kvasize %d bufsize %d "
"queue %d (recycling)", bp, bp->b_vp, bp->b_flags,
bp->b_kvasize, bp->b_bufsize, qindex);
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_assert(&bqclean, MA_NOTOWNED);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
/*
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
* Note: we no longer distinguish between VMIO and non-VMIO
* buffers.
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
*/
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
KASSERT((bp->b_flags & B_DELWRI) == 0,
("delwri buffer %p found in queue %d", bp, qindex));
if (qindex == QUEUE_CLEAN) {
if (bp->b_flags & B_VMIO) {
bp->b_flags &= ~B_ASYNC;
vfs_vmio_release(bp);
}
if (bp->b_vp != NULL)
brelvp(bp);
}
/*
* Get the rest of the buffer freed up. b_kva* is still valid
* after this operation.
*/
if (bp->b_rcred != NOCRED) {
crfree(bp->b_rcred);
bp->b_rcred = NOCRED;
}
if (bp->b_wcred != NOCRED) {
crfree(bp->b_wcred);
bp->b_wcred = NOCRED;
}
if (!LIST_EMPTY(&bp->b_dep))
buf_deallocate(bp);
if (bp->b_vflags & BV_BKGRDINPROG)
panic("losing buffer 3");
KASSERT(bp->b_vp == NULL, ("bp: %p still has vnode %p. qindex: %d",
bp, bp->b_vp, qindex));
KASSERT((bp->b_xflags & (BX_VNCLEAN|BX_VNDIRTY)) == 0,
("bp: %p still on a buffer list. xflags %X", bp, bp->b_xflags));
if (bp->b_bufsize)
allocbuf(bp, 0);
bp->b_flags &= B_UNMAPPED | B_KVAALLOC;
bp->b_ioflags = 0;
bp->b_xflags = 0;
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
KASSERT((bp->b_flags & B_INFREECNT) == 0,
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
("buf %p still counted as free?", bp));
bp->b_vflags = 0;
bp->b_vp = NULL;
bp->b_blkno = bp->b_lblkno = 0;
bp->b_offset = NOOFFSET;
bp->b_iodone = 0;
bp->b_error = 0;
bp->b_resid = 0;
bp->b_bcount = 0;
bp->b_npages = 0;
bp->b_dirtyoff = bp->b_dirtyend = 0;
bp->b_bufobj = NULL;
bp->b_pin_count = 0;
bp->b_fsprivate1 = NULL;
bp->b_fsprivate2 = NULL;
bp->b_fsprivate3 = NULL;
LIST_INIT(&bp->b_dep);
}
static int flushingbufs;
static struct buf *
getnewbuf_scan(int maxsize, int defrag, int unmapped, int metadata)
{
struct buf *bp, *nbp;
int nqindex, qindex, pass;
KASSERT(!unmapped || !defrag, ("both unmapped and defrag"));
pass = 1;
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
restart:
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
atomic_add_int(&getnewbufrestarts, 1);
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
/*
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
* Setup for scan. If we do not have enough free buffers,
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
* we setup a degenerate case that immediately fails. Note
* that if we are specially marked process, we are allowed to
* dip into our reserves.
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
*
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
* The scanning sequence is nominally: EMPTY->EMPTYKVA->CLEAN
* for the allocation of the mapped buffer. For unmapped, the
* easiest is to start with EMPTY outright.
Fix a performance problem with the new getnewbuf() code: in an outofspace condition ( bufspace > hibufspace ), an inappropriate scan of the empty queue was performed looking for buffer space to free up. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-04-07 02:41:54 +00:00
*
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
* We start with EMPTYKVA. If the list is empty we backup to EMPTY.
* However, there are a number of cases (defragging, reusing, ...)
* where we cannot backup.
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
*/
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
nbp = NULL;
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_lock(&bqclean);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if (!defrag && unmapped) {
nqindex = QUEUE_EMPTY;
nbp = TAILQ_FIRST(&bufqueues[QUEUE_EMPTY]);
}
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
if (nbp == NULL) {
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
nqindex = QUEUE_EMPTYKVA;
nbp = TAILQ_FIRST(&bufqueues[QUEUE_EMPTYKVA]);
}
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
/*
* If no EMPTYKVA buffers and we are either defragging or
* reusing, locate a CLEAN buffer to free or reuse. If
* bufspace useage is low skip this step so we can allocate a
* new buffer.
*/
if (nbp == NULL && (defrag || bufspace >= lobufspace)) {
nqindex = QUEUE_CLEAN;
nbp = TAILQ_FIRST(&bufqueues[QUEUE_CLEAN]);
}
/*
* If we could not find or were not allowed to reuse a CLEAN
* buffer, check to see if it is ok to use an EMPTY buffer.
* We can only use an EMPTY buffer if allocating its KVA would
* not otherwise run us out of buffer space. No KVA is needed
* for the unmapped allocation.
*/
if (nbp == NULL && defrag == 0 && (bufspace + maxsize < hibufspace ||
metadata)) {
nqindex = QUEUE_EMPTY;
nbp = TAILQ_FIRST(&bufqueues[QUEUE_EMPTY]);
}
/*
* All available buffers might be clean, retry ignoring the
* lobufspace as the last resort.
*/
if (nbp == NULL && !TAILQ_EMPTY(&bufqueues[QUEUE_CLEAN])) {
nqindex = QUEUE_CLEAN;
nbp = TAILQ_FIRST(&bufqueues[QUEUE_CLEAN]);
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
}
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
/*
* Run scan, possibly freeing data and/or kva mappings on the fly
* depending.
*/
while ((bp = nbp) != NULL) {
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
qindex = nqindex;
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
/*
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
* Calculate next bp (we can only use it if we do not
* block or do other fancy things).
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
*/
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
if ((nbp = TAILQ_NEXT(bp, b_freelist)) == NULL) {
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
switch (qindex) {
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
case QUEUE_EMPTY:
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
nqindex = QUEUE_EMPTYKVA;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
nbp = TAILQ_FIRST(&bufqueues[QUEUE_EMPTYKVA]);
if (nbp != NULL)
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
break;
Replace various spelling with FALLTHROUGH which is lint()able
2002-08-25 13:23:09 +00:00
/* FALLTHROUGH */
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
case QUEUE_EMPTYKVA:
nqindex = QUEUE_CLEAN;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
nbp = TAILQ_FIRST(&bufqueues[QUEUE_CLEAN]);
if (nbp != NULL)
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
break;
Replace various spelling with FALLTHROUGH which is lint()able
2002-08-25 13:23:09 +00:00
/* FALLTHROUGH */
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
case QUEUE_CLEAN:
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if (metadata && pass == 1) {
pass = 2;
nqindex = QUEUE_EMPTY;
nbp = TAILQ_FIRST(
&bufqueues[QUEUE_EMPTY]);
}
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
/*
* nbp is NULL.
*/
break;
}
}
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
/*
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
* If we are defragging then we need a buffer with
* b_kvasize != 0. XXX this situation should no longer
* occur, if defrag is non-zero the buffer's b_kvasize
* should also be non-zero at this point. XXX
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
*/
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
if (defrag && bp->b_kvasize == 0) {
printf("Warning: defrag empty buffer %p\n", bp);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
continue;
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
}
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
/*
* Start freeing the bp. This is somewhat involved. nbp
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
* remains valid only for QUEUE_EMPTY[KVA] bp's.
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
*/
- Add an interlock argument to BUF_LOCK and BUF_TIMELOCK. - Remove the buftimelock mutex and acquire the buf's interlock to protect these fields instead. - Hold the vnode interlock while locking bufs on the clean/dirty queues. This reduces some cases from one BUF_LOCK with a LK_NOWAIT and another BUF_LOCK with a LK_TIMEFAIL to a single lock. Reviewed by: arch, mckusick
2003-02-25 03:37:48 +00:00
if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT, NULL) != 0)
- Eliminate the acquisition and release of the bqlock in bremfree() by setting the B_REMFREE flag in the buf. This is done to prevent lock order reversals with code that must call bremfree() with a local lock held. This also reduces overhead by removing two lock operations per buf for fsync() and similar. - Check for the B_REMFREE flag in brelse() and bqrelse() after the bqlock has been acquired so that we may remove ourself from the free-list. - Provide a bremfreef() function to immediately remove a buf from a free-list for use only by NFS. This is done because the nfsclient code overloads the b_freelist queue for its own async. io queue. - Simplify the numfreebuffers accounting by removing a switch statement that executed the same code in every possible case. - getnewbuf() can encounter locked bufs on free-lists once Giant is removed. Remove a panic associated with this condition and delay asserts that inspect the buf until after it is locked. Reviewed by: phk Sponsored by: Isilon Systems, Inc.
2004-11-18 08:44:09 +00:00
continue;
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
/*
* BKGRDINPROG can only be set with the buf and bufobj
* locks both held. We tolerate a race to clear it here.
*/
if (bp->b_vflags & BV_BKGRDINPROG) {
BUF_UNLOCK(bp);
continue;
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
}
- Eliminate the acquisition and release of the bqlock in bremfree() by setting the B_REMFREE flag in the buf. This is done to prevent lock order reversals with code that must call bremfree() with a local lock held. This also reduces overhead by removing two lock operations per buf for fsync() and similar. - Check for the B_REMFREE flag in brelse() and bqrelse() after the bqlock has been acquired so that we may remove ourself from the free-list. - Provide a bremfreef() function to immediately remove a buf from a free-list for use only by NFS. This is done because the nfsclient code overloads the b_freelist queue for its own async. io queue. - Simplify the numfreebuffers accounting by removing a switch statement that executed the same code in every possible case. - getnewbuf() can encounter locked bufs on free-lists once Giant is removed. Remove a panic associated with this condition and delay asserts that inspect the buf until after it is locked. Reviewed by: phk Sponsored by: Isilon Systems, Inc.
2004-11-18 08:44:09 +00:00
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
KASSERT(bp->b_qindex == qindex,
("getnewbuf: inconsistent queue %d bp %p", qindex, bp));
- Eliminate the acquisition and release of the bqlock in bremfree() by setting the B_REMFREE flag in the buf. This is done to prevent lock order reversals with code that must call bremfree() with a local lock held. This also reduces overhead by removing two lock operations per buf for fsync() and similar. - Check for the B_REMFREE flag in brelse() and bqrelse() after the bqlock has been acquired so that we may remove ourself from the free-list. - Provide a bremfreef() function to immediately remove a buf from a free-list for use only by NFS. This is done because the nfsclient code overloads the b_freelist queue for its own async. io queue. - Simplify the numfreebuffers accounting by removing a switch statement that executed the same code in every possible case. - getnewbuf() can encounter locked bufs on free-lists once Giant is removed. Remove a panic associated with this condition and delay asserts that inspect the buf until after it is locked. Reviewed by: phk Sponsored by: Isilon Systems, Inc.
2004-11-18 08:44:09 +00:00
- Introduce a new function bremfreel() that does a bremfree with the buf queue lock already held. - In getblk() and flushbufqueues() use bremfreel() while we still have the buf queue lock held to keep the lists consistent. - Add LK_NOWAIT to two cases where we're essentially asserting that the bufs are not locked while acquiring the locks. This will make sure that we get the appropriate panic() and not another one for sleeping with a lock held.
2003-02-16 10:43:06 +00:00
bremfreel(bp);
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_unlock(&bqclean);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
/*
* NOTE: nbp is now entirely invalid. We can only restart
* the scan from this point on.
*/
Removed most of the special policy regarding the seperation of VMIO and dir/metadata buffers as it seems to have anomolous effects.
1995-03-07 19:53:27 +00:00
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
getnewbuf_reuse_bp(bp, qindex);
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_assert(&bqclean, MA_NOTOWNED);
Fix a problem with the new buffer_map management code. Additionally, decrease the size of buffer_map to approx 2/3 of what it used to be (buffer_map can be smaller now.) The original commit of these changes increased the size of buffer_map to the point where the system would not boot on large systems -- now large systems with large caches will have even less problems than before.
1996-12-01 15:46:40 +00:00
/*
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
* If we are defragging then free the buffer.
Fix a problem with the new buffer_map management code. Additionally, decrease the size of buffer_map to approx 2/3 of what it used to be (buffer_map can be smaller now.) The original commit of these changes increased the size of buffer_map to the point where the system would not boot on large systems -- now large systems with large caches will have even less problems than before.
1996-12-01 15:46:40 +00:00
*/
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
if (defrag) {
Fix a problem with the new buffer_map management code. Additionally, decrease the size of buffer_map to approx 2/3 of what it used to be (buffer_map can be smaller now.) The original commit of these changes increased the size of buffer_map to the point where the system would not boot on large systems -- now large systems with large caches will have even less problems than before.
1996-12-01 15:46:40 +00:00
bp->b_flags |= B_INVAL;
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
bfreekva(bp);
Fix a problem with the new buffer_map management code. Additionally, decrease the size of buffer_map to approx 2/3 of what it used to be (buffer_map can be smaller now.) The original commit of these changes increased the size of buffer_map to the point where the system would not boot on large systems -- now large systems with large caches will have even less problems than before.
1996-12-01 15:46:40 +00:00
brelse(bp);
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
defrag = 0;
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
goto restart;
}
If the buffer lock has waiters after the buffer has changed identity then getnewbuf() needs to drop the buffer in order to wake waiters that might sleep on the buffer in the context of the old identity.
2006-10-02 02:06:27 +00:00
/*
* Notify any waiters for the buffer lock about
* identity change by freeing the buffer.
*/
b_waiters cannot be adequately protected by the interlock because it is dropped after the call to lockmgr() so just revert this approach using something similar to the precedent one: BUF_LOCKWAITERS() just checks if there are waiters (not the actual number of them) and it is based on newly introduced lockmgr_waiters() which returns if the lockmgr has waiters or not. The name has been choosen differently by old lockwaiters() in order to not confuse them. KPI results enriched by this commit so __FreeBSD_version bumping and manpage update will be happening soon. 'struct buf' also changes, so kernel ABI is disturbed. Bug found by: jeff Approved by: jeff, kib
2008-03-28 12:30:12 +00:00
if (qindex == QUEUE_CLEAN && BUF_LOCKWAITERS(bp)) {
If the buffer lock has waiters after the buffer has changed identity then getnewbuf() needs to drop the buffer in order to wake waiters that might sleep on the buffer in the context of the old identity.
2006-10-02 02:06:27 +00:00
bp->b_flags |= B_INVAL;
bfreekva(bp);
brelse(bp);
goto restart;
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if (metadata)
break;
This commit represents work mainly submitted by Tor and slightly modified by myself. It solves a serious vm_map corruption problem that can occur with the buffer cache when block sizes > 64K are used. This code has been heavily tested in -stable but only tested somewhat on -current. An MFC will occur in a few days. My additions include the vm_map_simplify_entry() and minor buffer cache boundry case fix. Make the buffer cache use a system map for buffer cache KVM rather then a normal map. Ensure that VM objects are not allocated for system maps. There were cases where a buffer map could wind up with a backing VM object -- normally harmless, but this could also result in the buffer cache blocking in places where it assumes no blocking will occur, possibly resulting in corrupted maps. Fix a minor boundry case in the buffer cache size limit is reached that could result in non-optimal code. Add vm_map_simplify_entry() calls to prevent 'creeping proliferation' of vm_map_entry's in the buffer cache's vm_map. Previously only a simple linear optimization was made. (The buffer vm_map typically has only a handful of vm_map_entry's. This stabilizes it at that level permanently). PR: 20609 Submitted by: (Tor Egge) tegge
2001-02-04 06:19:28 +00:00
/*
* If we are overcomitted then recover the buffer and its
* KVM space. This occurs in rare situations when multiple
* processes are blocked in getnewbuf() or allocbuf().
*/
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
if (bufspace >= hibufspace)
flushingbufs = 1;
if (flushingbufs && bp->b_kvasize != 0) {
bp->b_flags |= B_INVAL;
bfreekva(bp);
brelse(bp);
goto restart;
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
}
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
if (bufspace < lobufspace)
flushingbufs = 0;
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
break;
Implement a new totally dynamic (up to MAXPHYS) buffer kva allocation scheme. Additionally, add the capability for checking for unexpected kernel page faults. The maximum amount of kva space for buffers hasn't been decreased from where it is, but it will now be possible to do so. This scheme manages the kva space similar to the buffers themselves. If there isn't enough kva space because of usage or fragementation, buffers will be reclaimed until a buffer allocation is successful. This scheme should be very resistant to fragmentation problems until/if the LFS code is fixed and uses the bogus buffer locking scheme -- but a 'fixed' LFS is not likely to use such a scheme. Now there should be NO problem allocating buffers up to MAXPHYS.
1996-11-30 22:41:49 +00:00
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
return (bp);
}
/*
* getnewbuf:
*
* Find and initialize a new buffer header, freeing up existing buffers
* in the bufqueues as necessary. The new buffer is returned locked.
*
* Important: B_INVAL is not set. If the caller wishes to throw the
* buffer away, the caller must set B_INVAL prior to calling brelse().
*
* We block if:
* We have insufficient buffer headers
* We have insufficient buffer space
- Add a general purpose resource allocator, vmem, from NetBSD. It was originally inspired by the Solaris vmem detailed in the proceedings of usenix 2001. The NetBSD version was heavily refactored for bugs and simplicity. - Use this resource allocator to allocate the buffer and transient maps. Buffer cache defrags are reduced by 25% when used by filesystems with mixed block sizes. Ultimately this may permit dynamic buffer cache sizing on low KVA machines. Discussed with: alc, kib, attilio Tested by: pho Sponsored by: EMC / Isilon Storage Division
2013-06-28 03:51:20 +00:00
* buffer_arena is too fragmented ( space reservation fails )
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
* If we have to flush dirty buffers ( but we try to avoid this )
*/
static struct buf *
getnewbuf(struct vnode *vp, int slpflag, int slptimeo, int size, int maxsize,
int gbflags)
{
struct buf *bp;
int defrag, metadata;
KASSERT((gbflags & (GB_UNMAPPED | GB_KVAALLOC)) != GB_KVAALLOC,
("GB_KVAALLOC only makes sense with GB_UNMAPPED"));
if (!unmapped_buf_allowed)
gbflags &= ~(GB_UNMAPPED | GB_KVAALLOC);
defrag = 0;
if (vp == NULL || (vp->v_vflag & (VV_MD | VV_SYSTEM)) != 0 ||
vp->v_type == VCHR)
metadata = 1;
else
metadata = 0;
/*
* We can't afford to block since we might be holding a vnode lock,
* which may prevent system daemons from running. We deal with
* low-memory situations by proactively returning memory and running
* async I/O rather then sync I/O.
*/
atomic_add_int(&getnewbufcalls, 1);
atomic_subtract_int(&getnewbufrestarts, 1);
restart:
bp = getnewbuf_scan(maxsize, defrag, (gbflags & (GB_UNMAPPED |
GB_KVAALLOC)) == GB_UNMAPPED, metadata);
if (bp != NULL)
defrag = 0;
Implement a new totally dynamic (up to MAXPHYS) buffer kva allocation scheme. Additionally, add the capability for checking for unexpected kernel page faults. The maximum amount of kva space for buffers hasn't been decreased from where it is, but it will now be possible to do so. This scheme manages the kva space similar to the buffers themselves. If there isn't enough kva space because of usage or fragementation, buffers will be reclaimed until a buffer allocation is successful. This scheme should be very resistant to fragmentation problems until/if the LFS code is fixed and uses the bogus buffer locking scheme -- but a 'fixed' LFS is not likely to use such a scheme. Now there should be NO problem allocating buffers up to MAXPHYS.
1996-11-30 22:41:49 +00:00
/*
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
* If we exhausted our list, sleep as appropriate. We may have to
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
* wakeup various daemons and write out some dirty buffers.
*
* Generally we are sleeping due to insufficient buffer space.
Implement a new totally dynamic (up to MAXPHYS) buffer kva allocation scheme. Additionally, add the capability for checking for unexpected kernel page faults. The maximum amount of kva space for buffers hasn't been decreased from where it is, but it will now be possible to do so. This scheme manages the kva space similar to the buffers themselves. If there isn't enough kva space because of usage or fragementation, buffers will be reclaimed until a buffer allocation is successful. This scheme should be very resistant to fragmentation problems until/if the LFS code is fixed and uses the bogus buffer locking scheme -- but a 'fixed' LFS is not likely to use such a scheme. Now there should be NO problem allocating buffers up to MAXPHYS.
1996-11-30 22:41:49 +00:00
*/
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
if (bp == NULL) {
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_assert(&bqclean, MA_OWNED);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
getnewbuf_bufd_help(vp, gbflags, slpflag, slptimeo, defrag);
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_assert(&bqclean, MA_NOTOWNED);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
} else if ((gbflags & (GB_UNMAPPED | GB_KVAALLOC)) == GB_UNMAPPED) {
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_assert(&bqclean, MA_NOTOWNED);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
bfreekva(bp);
bp->b_flags |= B_UNMAPPED;
bp->b_kvabase = bp->b_data = unmapped_buf;
bp->b_kvasize = maxsize;
atomic_add_long(&bufspace, bp->b_kvasize);
atomic_add_long(&unmapped_bufspace, bp->b_kvasize);
atomic_add_int(&bufreusecnt, 1);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
} else {
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_assert(&bqclean, MA_NOTOWNED);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
/*
* We finally have a valid bp. We aren't quite out of the
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
* woods, we still have to reserve kva space. In order
* to keep fragmentation sane we only allocate kva in
* BKVASIZE chunks.
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
*/
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
maxsize = (maxsize + BKVAMASK) & ~BKVAMASK;
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if (maxsize != bp->b_kvasize || (bp->b_flags & (B_UNMAPPED |
B_KVAALLOC)) == B_UNMAPPED) {
if (allocbufkva(bp, maxsize, gbflags)) {
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
defrag = 1;
bp->b_flags |= B_INVAL;
brelse(bp);
goto restart;
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
atomic_add_int(&bufreusecnt, 1);
} else if ((bp->b_flags & B_KVAALLOC) != 0 &&
(gbflags & (GB_UNMAPPED | GB_KVAALLOC)) == 0) {
/*
* If the reused buffer has KVA allocated,
* reassign b_kvaalloc to b_kvabase.
*/
bp->b_kvabase = bp->b_kvaalloc;
bp->b_flags &= ~B_KVAALLOC;
atomic_subtract_long(&unmapped_bufspace,
bp->b_kvasize);
atomic_add_int(&bufreusecnt, 1);
} else if ((bp->b_flags & (B_UNMAPPED | B_KVAALLOC)) == 0 &&
(gbflags & (GB_UNMAPPED | GB_KVAALLOC)) == (GB_UNMAPPED |
GB_KVAALLOC)) {
/*
* The case of reused buffer already have KVA
* mapped, but the request is for unmapped
* buffer with KVA allocated.
*/
bp->b_kvaalloc = bp->b_kvabase;
bp->b_data = bp->b_kvabase = unmapped_buf;
bp->b_flags |= B_UNMAPPED | B_KVAALLOC;
atomic_add_long(&unmapped_bufspace,
bp->b_kvasize);
Do not ignore zero address, possibly returned by the vm_map_find() call. The function indicates a failure by the TRUE return value. To be extra safe, assert that the return value from the following vm_map_insert() indicates success. Fix style issues in the nearby lines, reformulate the comment. Reviewed by: alc (previous version) Sponsored by: The FreeBSD Foundation MFC after: 1 week
2012-12-10 05:14:04 +00:00
atomic_add_int(&bufreusecnt, 1);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if ((gbflags & GB_UNMAPPED) == 0) {
bp->b_saveaddr = bp->b_kvabase;
bp->b_data = bp->b_saveaddr;
bp->b_flags &= ~B_UNMAPPED;
BUF_CHECK_MAPPED(bp);
}
Fix a problem with the new buffer_map management code. Additionally, decrease the size of buffer_map to approx 2/3 of what it used to be (buffer_map can be smaller now.) The original commit of these changes increased the size of buffer_map to the point where the system would not boot on large systems -- now large systems with large caches will have even less problems than before.
1996-12-01 15:46:40 +00:00
}
Do not ignore zero address, possibly returned by the vm_map_find() call. The function indicates a failure by the TRUE return value. To be extra safe, assert that the return value from the following vm_map_insert() indicates success. Fix style issues in the nearby lines, reformulate the comment. Reviewed by: alc (previous version) Sponsored by: The FreeBSD Foundation MFC after: 1 week
2012-12-10 05:14:04 +00:00
return (bp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
/*
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
* buf_daemon:
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
*
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
* buffer flushing daemon. Buffers are normally flushed by the
* update daemon but if it cannot keep up this process starts to
* take the load in an attempt to prevent getnewbuf() from blocking.
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
*/
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
static struct kproc_desc buf_kp = {
"bufdaemon",
buf_daemon,
&bufdaemonproc
};
In keeping with style(9)'s recommendations on macros, use a ';' after each SYSINIT() macro invocation. This makes a number of lightweight C parsers much happier with the FreeBSD kernel source, including cflow's prcc and lxr. MFC after: 1 month Discussed with: imp, rink
2008-03-16 10:58:09 +00:00
SYSINIT(bufdaemon, SI_SUB_KTHREAD_BUF, SI_ORDER_FIRST, kproc_start, &buf_kp);
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
static int
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
buf_flush(int target)
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
{
int flushed;
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
flushed = flushbufqueues(target, 0);
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
if (flushed == 0) {
/*
* Could not find any buffers without rollback
* dependencies, so just write the first one
* in the hopes of eventually making progress.
*/
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
flushed = flushbufqueues(target, 1);
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
}
return (flushed);
}
Fix a problem with the VN device. Specifically, the VN device can cause a problem of spiraling death due to buffer resource limitations. The vfs_bio code in general had little ability to handle buffer resource management, and now it does. Also, there are a lot more knobs for tuning the vfs_bio code now. The knobs came free because of the need that there always be some immediately available buffers (non-delayed or locked) for use. Note that the buffer cache code is much less likely to get bogged down with lots of delayed writes, even more so than before.
1997-06-15 17:56:53 +00:00
static void
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
buf_daemon()
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
{
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
int lodirty;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
/*
* This process needs to be suspended prior to shutdown sync.
*/
Stick the kthread API in a kthread_* namespace, and the specialized kproc functions in a kproc_* namespace. Reviewed by: -arch
2000-12-15 20:08:20 +00:00
EVENTHANDLER_REGISTER(shutdown_pre_sync, kproc_shutdown, bufdaemonproc,
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
SHUTDOWN_PRI_LAST);
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
/*
* This process is allowed to take the buffer cache to the limit
*/
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
curthread->td_pflags |= TDP_NORUNNINGBUF | TDP_BUFNEED;
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
mtx_lock(&bdlock);
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
for (;;) {
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
bd_request = 0;
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
mtx_unlock(&bdlock);
Rename the kthread_xxx (e.g. kthread_create()) calls to kproc_xxx as they actually make whole processes. Thos makes way for us to add REAL kthread_create() and friends that actually make theads. it turns out that most of these calls actually end up being moved back to the thread version when it's added. but we need to make this cosmetic change first. I'd LOVE to do this rename in 7.0 so that we can eventually MFC the new kthread_xxx() calls.
2007-10-20 23:23:23 +00:00
kproc_suspend_check(bufdaemonproc);
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
lodirty = lodirtybuffers;
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
if (bd_speedupreq) {
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
lodirty = numdirtybuffers / 2;
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
bd_speedupreq = 0;
}
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
/*
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
* Do the flush. Limit the amount of in-transit I/O we
* allow to build up, otherwise we would completely saturate
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
* the I/O system.
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
*/
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
while (numdirtybuffers > lodirty) {
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
if (buf_flush(numdirtybuffers - lodirty) == 0)
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
break;
Fixup r218424: uio_yield() was scaling directly to userland priority. When kern_yield() was introduced with the possibility to specify a new priority, the behaviour changed by not lowering priority at all in the consumers, making the yielding mechanism highly ineffective for high priority kthreads like bufdaemon, syncer, vlrudaemon, etc. There are no evidences that consumers could bear with such change in semantic and this situation could finally lead to bugs similar to the ones fixed in r244240. Re-specify userland pri for kthreads involved. Tested by: pho Reviewed by: kib, mdf MFC after: 1 week
2012-12-21 13:14:12 +00:00
kern_yield(PRI_USER);
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
}
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
/*
* Only clear bd_request if we have reached our low water
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
* mark. The buf_daemon normally waits 1 second and
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
* then incrementally flushes any dirty buffers that have
* built up, within reason.
*
* If we were unable to hit our low water mark and couldn't
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
* find any flushable buffers, we sleep for a short period
* to avoid endless loops on unlockable buffers.
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
*/
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
mtx_lock(&bdlock);
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
if (numdirtybuffers <= lodirtybuffers) {
Reimplement buf_daemon / getnewbuf() interaction for dealing with stressful situations. buf_daemon now makes a distinction between being woken up and its sleep timing out, and as a consequence is now much better able to dynamically tune itself to its environment. Reviewed by: Alfred Perlstein <bright@wintelcom.net>
1999-12-20 20:28:40 +00:00
/*
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
* We reached our low water mark, reset the
* request and sleep until we are needed again.
* The sleep is just so the suspend code works.
Reimplement buf_daemon / getnewbuf() interaction for dealing with stressful situations. buf_daemon now makes a distinction between being woken up and its sleep timing out, and as a consequence is now much better able to dynamically tune itself to its environment. Reviewed by: Alfred Perlstein <bright@wintelcom.net>
1999-12-20 20:28:40 +00:00
*/
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
bd_request = 0;
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
/*
* Do an extra wakeup in case dirty threshold
* changed via sysctl and the explicit transition
* out of shortfall was missed.
*/
bdirtywakeup();
if (runningbufspace <= lorunningspace)
runningwakeup();
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
msleep(&bd_request, &bdlock, PVM, "psleep", hz);
Reimplement buf_daemon / getnewbuf() interaction for dealing with stressful situations. buf_daemon now makes a distinction between being woken up and its sleep timing out, and as a consequence is now much better able to dynamically tune itself to its environment. Reviewed by: Alfred Perlstein <bright@wintelcom.net>
1999-12-20 20:28:40 +00:00
} else {
/*
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
* We couldn't find any flushable dirty buffers but
* still have too many dirty buffers, we
* have to sleep and try again. (rare)
Reimplement buf_daemon / getnewbuf() interaction for dealing with stressful situations. buf_daemon now makes a distinction between being woken up and its sleep timing out, and as a consequence is now much better able to dynamically tune itself to its environment. Reviewed by: Alfred Perlstein <bright@wintelcom.net>
1999-12-20 20:28:40 +00:00
*/
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
msleep(&bd_request, &bdlock, PVM, "qsleep", hz / 10);
Reimplement buf_daemon / getnewbuf() interaction for dealing with stressful situations. buf_daemon now makes a distinction between being woken up and its sleep timing out, and as a consequence is now much better able to dynamically tune itself to its environment. Reviewed by: Alfred Perlstein <bright@wintelcom.net>
1999-12-20 20:28:40 +00:00
}
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
}
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
}
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
/*
* flushbufqueues:
*
* Try to flush a buffer in the dirty queue. We must be careful to
* free up B_INVAL buffers instead of write them, which NFS is
* particularly sensitive to.
*/
Make various vnode related functions static
2005-02-10 12:28:58 +00:00
static int flushwithdeps = 0;
The buffer daemon cannot skip over buffers owned by locked inodes as they may be the only viable ones to flush. Thus it will now wait for an inode lock if the other alternatives will result in rollbacks (and immediate redirtying of the buffer). If only buffers with rollbacks are available, one will be flushed, but then the buffer daemon will wait briefly before proceeding. Failing to wait briefly effectively deadlocks a uniprocessor since every other process writing to that filesystem will wait for the buffer daemon to clean up which takes close enough to forever to feel like a deadlock. Reported by: Archie Cobbs <archie@dellroad.org> Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:35:30 +00:00
SYSCTL_INT(_vfs, OID_AUTO, flushwithdeps, CTLFLAG_RW, &flushwithdeps,
0, "Number of buffers flushed with dependecies that require rollbacks");
stylistic polishing.
2004-09-15 20:54:23 +00:00
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
static int
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
flushbufqueues(int target, int flushdeps)
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
{
In flushbufqueues(), do not allocate sentinel buffer on the stack, struct buf is large. Use sleeping malloc(9) call, and zero the allocated buf as a debugging feature.
2009-04-16 09:37:48 +00:00
struct buf *sentinel;
When the number of dirty buffers rises too high, the buf_daemon runs to help clean up. After selecting a potential buffer to write, this patch has it acquire a lock on the vnode that owns the buffer before trying to write it. The vnode lock is necessary to avoid a race with some other process holding the vnode locked and trying to flush its dirty buffers. In particular, if the vnode in question is a snapshot file, then the race can lead to a deadlock. To avoid slowing down the buf_daemon, it does a non-blocking lock request when trying to lock the vnode. If it fails to get the lock it skips over the buffer and continues down its queue looking for buffers to flush. Sponsored by: DARPA & NAI Labs.
2002-10-18 01:29:59 +00:00
struct vnode *vp;
- Add a missing vn_start_write() to flushbufqueues(). This could have caused snapshot related problems. - The vp can not be NULL here or we would panic in vfs_bio_awrite(). Stop confusing the logic by checking for it in several places. Submitted by: kirk and then rototilled by me to remove vp == NULL checks.
2003-10-05 22:16:08 +00:00
struct mount *mp;
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
struct buf *bp;
- Remove a race between fsync like functions and flushbufqueues() by requiring locked bufs in vfs_bio_awrite(). Previously the buf could have been written out by fsync before we acquired the buf lock if it weren't for giant. The cluster_wbuild() handles this race properly but the single write at the end of vfs_bio_awrite() would not. - Modify flushbufqueues() so there is only one copy of the loop. Pass a parameter in that says whether or not we should sync bufs with deps. - Call flushbufqueues() a second time and then break if we couldn't find any bufs without deps.
2003-03-13 07:19:23 +00:00
int hasdeps;
- Under heavy IO load the buf daemon can run for many hundereds of milliseconds due to what is essentially n^2 algorithmic complexity. This change makes the algorithm N*2 instead. This heavy processing manifested itself as skipping in audio and video playback due to the long scheduling latencies and contention on giant by pcm. - flushbufqueues() is now responsible for flushing multiple buffers rather than one at a time. This allows us to save our progress in the list by using a sentinal. We must do the numdirtywakeup() and waitrunningbufspace() here now rather than in buf_daemon(). - Also add a uio_yield() after we have processed the list once for bufs without deps and again for bufs with deps. This is to release Giant and allow any other giant locked code to proceed. Tested by: Many users on current@ Revealed by: schedgraph traces sent by Emil Mikulic & Anthony Ginepro
2005-06-08 20:26:05 +00:00
int flushed;
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
int queue;
Reimplement r255797 using LK_TRYUPGRADE. The r255797 was: Increase the chance of the buffer write from the bufdaemon helper context to succeed. If the locked vnode which owns the buffer to be written is shared locked, try the non-blocking upgrade of the lock to exclusive. PR: kern/178997 Reported and tested by: Klaus Weber <fbsd-bugs-2013-1@unix-admin.de> Sponsored by: The FreeBSD Foundation MFC after: 1 week Approved by: re (glebius)
2013-09-29 18:04:57 +00:00
int error;
- Under heavy IO load the buf daemon can run for many hundereds of milliseconds due to what is essentially n^2 algorithmic complexity. This change makes the algorithm N*2 instead. This heavy processing manifested itself as skipping in audio and video playback due to the long scheduling latencies and contention on giant by pcm. - flushbufqueues() is now responsible for flushing multiple buffers rather than one at a time. This allows us to save our progress in the list by using a sentinal. We must do the numdirtywakeup() and waitrunningbufspace() here now rather than in buf_daemon(). - Also add a uio_yield() after we have processed the list once for bufs without deps and again for bufs with deps. This is to release Giant and allow any other giant locked code to proceed. Tested by: Many users on current@ Revealed by: schedgraph traces sent by Emil Mikulic & Anthony Ginepro
2005-06-08 20:26:05 +00:00
flushed = 0;
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
queue = QUEUE_DIRTY;
- Under heavy IO load the buf daemon can run for many hundereds of milliseconds due to what is essentially n^2 algorithmic complexity. This change makes the algorithm N*2 instead. This heavy processing manifested itself as skipping in audio and video playback due to the long scheduling latencies and contention on giant by pcm. - flushbufqueues() is now responsible for flushing multiple buffers rather than one at a time. This allows us to save our progress in the list by using a sentinal. We must do the numdirtywakeup() and waitrunningbufspace() here now rather than in buf_daemon(). - Also add a uio_yield() after we have processed the list once for bufs without deps and again for bufs with deps. This is to release Giant and allow any other giant locked code to proceed. Tested by: Many users on current@ Revealed by: schedgraph traces sent by Emil Mikulic & Anthony Ginepro
2005-06-08 20:26:05 +00:00
bp = NULL;
In flushbufqueues(), do not allocate sentinel buffer on the stack, struct buf is large. Use sleeping malloc(9) call, and zero the allocated buf as a debugging feature.
2009-04-16 09:37:48 +00:00
sentinel = malloc(sizeof(struct buf), M_TEMP, M_WAITOK | M_ZERO);
sentinel->b_qindex = QUEUE_SENTINEL;
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_lock(&bqdirty);
In flushbufqueues(), do not allocate sentinel buffer on the stack, struct buf is large. Use sleeping malloc(9) call, and zero the allocated buf as a debugging feature.
2009-04-16 09:37:48 +00:00
TAILQ_INSERT_HEAD(&bufqueues[queue], sentinel, b_freelist);
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
mtx_unlock(&bqdirty);
- Under heavy IO load the buf daemon can run for many hundereds of milliseconds due to what is essentially n^2 algorithmic complexity. This change makes the algorithm N*2 instead. This heavy processing manifested itself as skipping in audio and video playback due to the long scheduling latencies and contention on giant by pcm. - flushbufqueues() is now responsible for flushing multiple buffers rather than one at a time. This allows us to save our progress in the list by using a sentinal. We must do the numdirtywakeup() and waitrunningbufspace() here now rather than in buf_daemon(). - Also add a uio_yield() after we have processed the list once for bufs without deps and again for bufs with deps. This is to release Giant and allow any other giant locked code to proceed. Tested by: Many users on current@ Revealed by: schedgraph traces sent by Emil Mikulic & Anthony Ginepro
2005-06-08 20:26:05 +00:00
while (flushed != target) {
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
maybe_yield();
mtx_lock(&bqdirty);
In flushbufqueues(), do not allocate sentinel buffer on the stack, struct buf is large. Use sleeping malloc(9) call, and zero the allocated buf as a debugging feature.
2009-04-16 09:37:48 +00:00
bp = TAILQ_NEXT(sentinel, b_freelist);
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
if (bp != NULL) {
In flushbufqueues(), do not allocate sentinel buffer on the stack, struct buf is large. Use sleeping malloc(9) call, and zero the allocated buf as a debugging feature.
2009-04-16 09:37:48 +00:00
TAILQ_REMOVE(&bufqueues[queue], sentinel, b_freelist);
TAILQ_INSERT_AFTER(&bufqueues[queue], bp, sentinel,
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
b_freelist);
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
} else {
mtx_unlock(&bqdirty);
- Under heavy IO load the buf daemon can run for many hundereds of milliseconds due to what is essentially n^2 algorithmic complexity. This change makes the algorithm N*2 instead. This heavy processing manifested itself as skipping in audio and video playback due to the long scheduling latencies and contention on giant by pcm. - flushbufqueues() is now responsible for flushing multiple buffers rather than one at a time. This allows us to save our progress in the list by using a sentinal. We must do the numdirtywakeup() and waitrunningbufspace() here now rather than in buf_daemon(). - Also add a uio_yield() after we have processed the list once for bufs without deps and again for bufs with deps. This is to release Giant and allow any other giant locked code to proceed. Tested by: Many users on current@ Revealed by: schedgraph traces sent by Emil Mikulic & Anthony Ginepro
2005-06-08 20:26:05 +00:00
break;
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
}
KASSERT(bp->b_qindex != QUEUE_SENTINEL,
("parallel calls to flushbufqueues() bp %p", bp));
error = BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT, NULL);
mtx_unlock(&bqdirty);
if (error != 0)
The buffer daemon cannot skip over buffers owned by locked inodes as they may be the only viable ones to flush. Thus it will now wait for an inode lock if the other alternatives will result in rollbacks (and immediate redirtying of the buffer). If only buffers with rollbacks are available, one will be flushed, but then the buffer daemon will wait briefly before proceeding. Failing to wait briefly effectively deadlocks a uniprocessor since every other process writing to that filesystem will wait for the buffer daemon to clean up which takes close enough to forever to feel like a deadlock. Reported by: Archie Cobbs <archie@dellroad.org> Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:35:30 +00:00
continue;
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
if (bp->b_pin_count > 0) {
BUF_UNLOCK(bp);
continue;
}
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
/*
* BKGRDINPROG can only be set with the buf and bufobj
* locks both held. We tolerate a race to clear it here.
*/
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
if ((bp->b_vflags & BV_BKGRDINPROG) != 0 ||
(bp->b_flags & B_DELWRI) == 0) {
- Remove a race between fsync like functions and flushbufqueues() by requiring locked bufs in vfs_bio_awrite(). Previously the buf could have been written out by fsync before we acquired the buf lock if it weren't for giant. The cluster_wbuild() handles this race properly but the single write at the end of vfs_bio_awrite() would not. - Modify flushbufqueues() so there is only one copy of the loop. Pass a parameter in that says whether or not we should sync bufs with deps. - Call flushbufqueues() a second time and then break if we couldn't find any bufs without deps.
2003-03-13 07:19:23 +00:00
BUF_UNLOCK(bp);
The buffer daemon cannot skip over buffers owned by locked inodes as they may be the only viable ones to flush. Thus it will now wait for an inode lock if the other alternatives will result in rollbacks (and immediate redirtying of the buffer). If only buffers with rollbacks are available, one will be flushed, but then the buffer daemon will wait briefly before proceeding. Failing to wait briefly effectively deadlocks a uniprocessor since every other process writing to that filesystem will wait for the buffer daemon to clean up which takes close enough to forever to feel like a deadlock. Reported by: Archie Cobbs <archie@dellroad.org> Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:35:30 +00:00
continue;
- Remove a race between fsync like functions and flushbufqueues() by requiring locked bufs in vfs_bio_awrite(). Previously the buf could have been written out by fsync before we acquired the buf lock if it weren't for giant. The cluster_wbuild() handles this race properly but the single write at the end of vfs_bio_awrite() would not. - Modify flushbufqueues() so there is only one copy of the loop. Pass a parameter in that says whether or not we should sync bufs with deps. - Call flushbufqueues() a second time and then break if we couldn't find any bufs without deps.
2003-03-13 07:19:23 +00:00
}
The buffer daemon cannot skip over buffers owned by locked inodes as they may be the only viable ones to flush. Thus it will now wait for an inode lock if the other alternatives will result in rollbacks (and immediate redirtying of the buffer). If only buffers with rollbacks are available, one will be flushed, but then the buffer daemon will wait briefly before proceeding. Failing to wait briefly effectively deadlocks a uniprocessor since every other process writing to that filesystem will wait for the buffer daemon to clean up which takes close enough to forever to feel like a deadlock. Reported by: Archie Cobbs <archie@dellroad.org> Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:35:30 +00:00
if (bp->b_flags & B_INVAL) {
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
bremfreef(bp);
The buffer daemon cannot skip over buffers owned by locked inodes as they may be the only viable ones to flush. Thus it will now wait for an inode lock if the other alternatives will result in rollbacks (and immediate redirtying of the buffer). If only buffers with rollbacks are available, one will be flushed, but then the buffer daemon will wait briefly before proceeding. Failing to wait briefly effectively deadlocks a uniprocessor since every other process writing to that filesystem will wait for the buffer daemon to clean up which takes close enough to forever to feel like a deadlock. Reported by: Archie Cobbs <archie@dellroad.org> Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:35:30 +00:00
brelse(bp);
- Under heavy IO load the buf daemon can run for many hundereds of milliseconds due to what is essentially n^2 algorithmic complexity. This change makes the algorithm N*2 instead. This heavy processing manifested itself as skipping in audio and video playback due to the long scheduling latencies and contention on giant by pcm. - flushbufqueues() is now responsible for flushing multiple buffers rather than one at a time. This allows us to save our progress in the list by using a sentinal. We must do the numdirtywakeup() and waitrunningbufspace() here now rather than in buf_daemon(). - Also add a uio_yield() after we have processed the list once for bufs without deps and again for bufs with deps. This is to release Giant and allow any other giant locked code to proceed. Tested by: Many users on current@ Revealed by: schedgraph traces sent by Emil Mikulic & Anthony Ginepro
2005-06-08 20:26:05 +00:00
flushed++;
continue;
The buffer daemon cannot skip over buffers owned by locked inodes as they may be the only viable ones to flush. Thus it will now wait for an inode lock if the other alternatives will result in rollbacks (and immediate redirtying of the buffer). If only buffers with rollbacks are available, one will be flushed, but then the buffer daemon will wait briefly before proceeding. Failing to wait briefly effectively deadlocks a uniprocessor since every other process writing to that filesystem will wait for the buffer daemon to clean up which takes close enough to forever to feel like a deadlock. Reported by: Archie Cobbs <archie@dellroad.org> Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:35:30 +00:00
}
- Remove a race between fsync like functions and flushbufqueues() by requiring locked bufs in vfs_bio_awrite(). Previously the buf could have been written out by fsync before we acquired the buf lock if it weren't for giant. The cluster_wbuild() handles this race properly but the single write at the end of vfs_bio_awrite() would not. - Modify flushbufqueues() so there is only one copy of the loop. Pass a parameter in that says whether or not we should sync bufs with deps. - Call flushbufqueues() a second time and then break if we couldn't find any bufs without deps.
2003-03-13 07:19:23 +00:00
Use LIST_EMPTY() instead of unrolled version (LIST_FIRST() [!=]= NULL)
2007-02-22 14:52:59 +00:00
if (!LIST_EMPTY(&bp->b_dep) && buf_countdeps(bp, 0)) {
- Remove a race between fsync like functions and flushbufqueues() by requiring locked bufs in vfs_bio_awrite(). Previously the buf could have been written out by fsync before we acquired the buf lock if it weren't for giant. The cluster_wbuild() handles this race properly but the single write at the end of vfs_bio_awrite() would not. - Modify flushbufqueues() so there is only one copy of the loop. Pass a parameter in that says whether or not we should sync bufs with deps. - Call flushbufqueues() a second time and then break if we couldn't find any bufs without deps.
2003-03-13 07:19:23 +00:00
if (flushdeps == 0) {
BUF_UNLOCK(bp);
continue;
}
hasdeps = 1;
} else
hasdeps = 0;
The buffer daemon cannot skip over buffers owned by locked inodes as they may be the only viable ones to flush. Thus it will now wait for an inode lock if the other alternatives will result in rollbacks (and immediate redirtying of the buffer). If only buffers with rollbacks are available, one will be flushed, but then the buffer daemon will wait briefly before proceeding. Failing to wait briefly effectively deadlocks a uniprocessor since every other process writing to that filesystem will wait for the buffer daemon to clean up which takes close enough to forever to feel like a deadlock. Reported by: Archie Cobbs <archie@dellroad.org> Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:35:30 +00:00
/*
* We must hold the lock on a vnode before writing
* one of its buffers. Otherwise we may confuse, or
* in the case of a snapshot vnode, deadlock the
* system.
- Remove a race between fsync like functions and flushbufqueues() by requiring locked bufs in vfs_bio_awrite(). Previously the buf could have been written out by fsync before we acquired the buf lock if it weren't for giant. The cluster_wbuild() handles this race properly but the single write at the end of vfs_bio_awrite() would not. - Modify flushbufqueues() so there is only one copy of the loop. Pass a parameter in that says whether or not we should sync bufs with deps. - Call flushbufqueues() a second time and then break if we couldn't find any bufs without deps.
2003-03-13 07:19:23 +00:00
*
* The lock order here is the reverse of the normal
* of vnode followed by buf lock. This is ok because
* the NOWAIT will prevent deadlock.
The buffer daemon cannot skip over buffers owned by locked inodes as they may be the only viable ones to flush. Thus it will now wait for an inode lock if the other alternatives will result in rollbacks (and immediate redirtying of the buffer). If only buffers with rollbacks are available, one will be flushed, but then the buffer daemon will wait briefly before proceeding. Failing to wait briefly effectively deadlocks a uniprocessor since every other process writing to that filesystem will wait for the buffer daemon to clean up which takes close enough to forever to feel like a deadlock. Reported by: Archie Cobbs <archie@dellroad.org> Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:35:30 +00:00
*/
- Add a missing vn_start_write() to flushbufqueues(). This could have caused snapshot related problems. - The vp can not be NULL here or we would panic in vfs_bio_awrite(). Stop confusing the logic by checking for it in several places. Submitted by: kirk and then rototilled by me to remove vp == NULL checks.
2003-10-05 22:16:08 +00:00
vp = bp->b_vp;
if (vn_start_write(vp, &mp, V_NOWAIT) != 0) {
BUF_UNLOCK(bp);
continue;
}
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
error = vn_lock(vp, LK_EXCLUSIVE | LK_NOWAIT);
Reimplement r255797 using LK_TRYUPGRADE. The r255797 was: Increase the chance of the buffer write from the bufdaemon helper context to succeed. If the locked vnode which owns the buffer to be written is shared locked, try the non-blocking upgrade of the lock to exclusive. PR: kern/178997 Reported and tested by: Klaus Weber <fbsd-bugs-2013-1@unix-admin.de> Sponsored by: The FreeBSD Foundation MFC after: 1 week Approved by: re (glebius)
2013-09-29 18:04:57 +00:00
if (error == 0) {
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
CTR3(KTR_BUF, "flushbufqueue(%p) vp %p flags %X",
bp, bp->b_vp, bp->b_flags);
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
vfs_bio_awrite(bp);
- Add a missing vn_start_write() to flushbufqueues(). This could have caused snapshot related problems. - The vp can not be NULL here or we would panic in vfs_bio_awrite(). Stop confusing the logic by checking for it in several places. Submitted by: kirk and then rototilled by me to remove vp == NULL checks.
2003-10-05 22:16:08 +00:00
vn_finished_write(mp);
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
VOP_UNLOCK(vp, 0);
- Remove a race between fsync like functions and flushbufqueues() by requiring locked bufs in vfs_bio_awrite(). Previously the buf could have been written out by fsync before we acquired the buf lock if it weren't for giant. The cluster_wbuild() handles this race properly but the single write at the end of vfs_bio_awrite() would not. - Modify flushbufqueues() so there is only one copy of the loop. Pass a parameter in that says whether or not we should sync bufs with deps. - Call flushbufqueues() a second time and then break if we couldn't find any bufs without deps.
2003-03-13 07:19:23 +00:00
flushwithdeps += hasdeps;
- Under heavy IO load the buf daemon can run for many hundereds of milliseconds due to what is essentially n^2 algorithmic complexity. This change makes the algorithm N*2 instead. This heavy processing manifested itself as skipping in audio and video playback due to the long scheduling latencies and contention on giant by pcm. - flushbufqueues() is now responsible for flushing multiple buffers rather than one at a time. This allows us to save our progress in the list by using a sentinal. We must do the numdirtywakeup() and waitrunningbufspace() here now rather than in buf_daemon(). - Also add a uio_yield() after we have processed the list once for bufs without deps and again for bufs with deps. This is to release Giant and allow any other giant locked code to proceed. Tested by: Many users on current@ Revealed by: schedgraph traces sent by Emil Mikulic & Anthony Ginepro
2005-06-08 20:26:05 +00:00
flushed++;
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
if (runningbufspace > hirunningspace)
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
waitrunningbufspace();
- Under heavy IO load the buf daemon can run for many hundereds of milliseconds due to what is essentially n^2 algorithmic complexity. This change makes the algorithm N*2 instead. This heavy processing manifested itself as skipping in audio and video playback due to the long scheduling latencies and contention on giant by pcm. - flushbufqueues() is now responsible for flushing multiple buffers rather than one at a time. This allows us to save our progress in the list by using a sentinal. We must do the numdirtywakeup() and waitrunningbufspace() here now rather than in buf_daemon(). - Also add a uio_yield() after we have processed the list once for bufs without deps and again for bufs with deps. This is to release Giant and allow any other giant locked code to proceed. Tested by: Many users on current@ Revealed by: schedgraph traces sent by Emil Mikulic & Anthony Ginepro
2005-06-08 20:26:05 +00:00
continue;
The buffer daemon cannot skip over buffers owned by locked inodes as they may be the only viable ones to flush. Thus it will now wait for an inode lock if the other alternatives will result in rollbacks (and immediate redirtying of the buffer). If only buffers with rollbacks are available, one will be flushed, but then the buffer daemon will wait briefly before proceeding. Failing to wait briefly effectively deadlocks a uniprocessor since every other process writing to that filesystem will wait for the buffer daemon to clean up which takes close enough to forever to feel like a deadlock. Reported by: Archie Cobbs <archie@dellroad.org> Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:35:30 +00:00
}
- Add a mising vn_finished_write() Pointy hat: jeff Found by: robert Obtained from: kirk
2003-10-14 00:38:34 +00:00
vn_finished_write(mp);
- Remove a race between fsync like functions and flushbufqueues() by requiring locked bufs in vfs_bio_awrite(). Previously the buf could have been written out by fsync before we acquired the buf lock if it weren't for giant. The cluster_wbuild() handles this race properly but the single write at the end of vfs_bio_awrite() would not. - Modify flushbufqueues() so there is only one copy of the loop. Pass a parameter in that says whether or not we should sync bufs with deps. - Call flushbufqueues() a second time and then break if we couldn't find any bufs without deps.
2003-03-13 07:19:23 +00:00
BUF_UNLOCK(bp);
The buffer daemon cannot skip over buffers owned by locked inodes as they may be the only viable ones to flush. Thus it will now wait for an inode lock if the other alternatives will result in rollbacks (and immediate redirtying of the buffer). If only buffers with rollbacks are available, one will be flushed, but then the buffer daemon will wait briefly before proceeding. Failing to wait briefly effectively deadlocks a uniprocessor since every other process writing to that filesystem will wait for the buffer daemon to clean up which takes close enough to forever to feel like a deadlock. Reported by: Archie Cobbs <archie@dellroad.org> Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:35:30 +00:00
}
When helping the bufdaemon from the buffer allocation context, there is no sense to walk the whole dirty buffer queue. We are only interested in, and can operate on, the buffers owned by the current vnode [1]. Instead of calling generic queue flush routine, do VOP_FSYNC() if possible. Holding the dirty buffer queue lock in the bufdaemon, without dropping it, can cause starvation of buffer writes from other threads. This is esp. easy to reproduce on the big memory machines, where large files are written, causing almost all dirty buffers accumulating in several big files, which vnodes are locked by writers. Bufdaemon cannot flush any buffer, but is iterating over the whole dirty queue continuously. Since dirty queue mutex is not dropped, bufdone() in g_up thread is starved, usually deadlocking the machine [2]. Mitigate this by dropping the queue lock after the vnode is locked, allowing other queue lock contenders to make a progress. Discussed with: Jeff [1] Reported by: pho [2] Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Approved by: re (hrs)
2013-10-02 06:00:34 +00:00
mtx_lock(&bqdirty);
In flushbufqueues(), do not allocate sentinel buffer on the stack, struct buf is large. Use sleeping malloc(9) call, and zero the allocated buf as a debugging feature.
2009-04-16 09:37:48 +00:00
TAILQ_REMOVE(&bufqueues[queue], sentinel, b_freelist);
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
mtx_unlock(&bqdirty);
In flushbufqueues(), do not allocate sentinel buffer on the stack, struct buf is large. Use sleeping malloc(9) call, and zero the allocated buf as a debugging feature.
2009-04-16 09:37:48 +00:00
free(sentinel, M_TEMP);
- Under heavy IO load the buf daemon can run for many hundereds of milliseconds due to what is essentially n^2 algorithmic complexity. This change makes the algorithm N*2 instead. This heavy processing manifested itself as skipping in audio and video playback due to the long scheduling latencies and contention on giant by pcm. - flushbufqueues() is now responsible for flushing multiple buffers rather than one at a time. This allows us to save our progress in the list by using a sentinal. We must do the numdirtywakeup() and waitrunningbufspace() here now rather than in buf_daemon(). - Also add a uio_yield() after we have processed the list once for bufs without deps and again for bufs with deps. This is to release Giant and allow any other giant locked code to proceed. Tested by: Many users on current@ Revealed by: schedgraph traces sent by Emil Mikulic & Anthony Ginepro
2005-06-08 20:26:05 +00:00
return (flushed);
Fix a problem with the VN device. Specifically, the VN device can cause a problem of spiraling death due to buffer resource limitations. The vfs_bio code in general had little ability to handle buffer resource management, and now it does. Also, there are a lot more knobs for tuning the vfs_bio code now. The knobs came free because of the need that there always be some immediately available buffers (non-delayed or locked) for use. Note that the buffer cache code is much less likely to get bogged down with lots of delayed writes, even more so than before.
1997-06-15 17:56:53 +00:00
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/*
* Check to see if a block is currently memory resident.
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct buf *
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
incore(struct bufobj *bo, daddr_t blkno)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
struct buf *bp;
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
BO_RLOCK(bo);
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
bp = gbincore(bo, blkno);
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
BO_RUNLOCK(bo);
Improvements to the cluster code, minor vfs_bio efficiency: Better performance -- more aggressive read-ahead under certain circumstanses. Mods to support clustering on small ( < PAGE_SIZE) block size filesystems (e.g. ext2fs, msdosfs.)
1995-09-03 19:56:15 +00:00
return (bp);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
/*
Only do object paging_in_progress wakeups if someone is waiting on this condition. Added some comments. Submitted by: John Dyson
1995-02-22 09:16:07 +00:00
* Returns true if no I/O is needed to access the
* associated VM object. This is like incore except
* it also hunts around in the VM system for the data.
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
*/
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
static int
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
inmem(struct vnode * vp, daddr_t blkno)
{
vm_object_t obj;
Correctly handle misaligned VMIO buffer (whose start or end offset in the VM object are not page aligned). This should fix the mount_msdos panic after a failed attemp to mount as ffs. Reviewed By: Matthew Dillon <dillon@apollo.backplane.com> Archie Cobbs <archie@whistle.com> Dmitrij Tejblum <dima@tejblum.dnttm.rssi.ru>
1998-12-22 14:43:58 +00:00
vm_offset_t toff, tinc, size;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
vm_page_t m;
Changes to support 1Tb filesizes. Pages are now named by an (object,index) pair instead of (object,offset) pair.
1995-12-11 04:58:34 +00:00
vm_ooffset_t off;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
- Lock accesses to v_numoutput. - Lock calls to gbincore.
2002-09-25 02:11:37 +00:00
ASSERT_VOP_LOCKED(vp, "inmem");
With Alfred's permission, remove vm_mtx in favor of a fine-grained approach (this commit is just the first stage). Also add various GIANT_ macros to formalize the removal of Giant, making it easy to test in a more piecemeal fashion. These macros will allow us to test fine-grained locks to a degree before removing Giant, and also after, and to remove Giant in a piecemeal fashion via sysctl's on those subsystems which the authors believe can operate without Giant.
2001-07-04 16:20:28 +00:00
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
if (incore(&vp->v_bufobj, blkno))
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
return 1;
Another minor optimization, this time to incore().
1995-08-24 13:59:14 +00:00
if (vp->v_mount == NULL)
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
return 0;
Don't use VOP_GETVOBJECT, use vp->v_object directly.
2005-01-25 00:40:01 +00:00
obj = vp->v_object;
if (obj == NULL)
return (0);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
Correctly handle misaligned VMIO buffer (whose start or end offset in the VM object are not page aligned). This should fix the mount_msdos panic after a failed attemp to mount as ffs. Reviewed By: Matthew Dillon <dillon@apollo.backplane.com> Archie Cobbs <archie@whistle.com> Dmitrij Tejblum <dima@tejblum.dnttm.rssi.ru>
1998-12-22 14:43:58 +00:00
size = PAGE_SIZE;
if (size > vp->v_mount->mnt_stat.f_iosize)
size = vp->v_mount->mnt_stat.f_iosize;
fix intermediate overflow in 'quad = int * int' situation by casting the arguments to the multiply to a quad equivalent. In this case, vm_ooffset_t. Reviewed by: Archie Cobbs <archie@whistle.com>
1998-12-14 21:17:37 +00:00
off = (vm_ooffset_t)blkno * (vm_ooffset_t)vp->v_mount->mnt_stat.f_iosize;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
Use readlocking now that assertions on vm_page_lookup() are relaxed. Sponsored by: EMC / Isilon storage division Reviewed by: alc Tested by: flo, pho
2013-05-17 20:03:55 +00:00
VM_OBJECT_RLOCK(obj);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
for (toff = 0; toff < vp->v_mount->mnt_stat.f_iosize; toff += tinc) {
Changes to support 1Tb filesizes. Pages are now named by an (object,index) pair instead of (object,offset) pair.
1995-12-11 04:58:34 +00:00
m = vm_page_lookup(obj, OFF_TO_IDX(off + toff));
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
if (!m)
Introduce a global lock for the vm subsystem (vm_mtx). vm_mtx does not recurse and is required for most low level vm operations. faults can not be taken without holding Giant. Memory subsystems can now call the base page allocators safely. Almost all atomic ops were removed as they are covered under the vm mutex. Alpha and ia64 now need to catch up to i386's trap handlers. FFS and NFS have been tested, other filesystems will need minor changes (grabbing the vm lock when twiddling page properties). Reviewed (partially) by: jake, jhb
2001-05-19 01:28:09 +00:00
goto notinmem;
Correctly handle misaligned VMIO buffer (whose start or end offset in the VM object are not page aligned). This should fix the mount_msdos panic after a failed attemp to mount as ffs. Reviewed By: Matthew Dillon <dillon@apollo.backplane.com> Archie Cobbs <archie@whistle.com> Dmitrij Tejblum <dima@tejblum.dnttm.rssi.ru>
1998-12-22 14:43:58 +00:00
tinc = size;
if (tinc > PAGE_SIZE - ((toff + off) & PAGE_MASK))
tinc = PAGE_SIZE - ((toff + off) & PAGE_MASK);
vm_page_is_valid() wasn't expecting a large offset argument, it's expecting a sub-page offset. We were passing the file position, and vm_page_bits() could do some interesting things when base was larger PAGE_SIZE. if (size > PAGE_SIZE - base) size = PAGE_SIZE - base; is interesting when (PAGE_SIZE - base) is negative. I could imagine that this could have interesting consequences for memory page -> device block bit validation.
1998-05-01 15:10:59 +00:00
if (vm_page_is_valid(m,
(vm_offset_t) ((toff + off) & PAGE_MASK), tinc) == 0)
Introduce a global lock for the vm subsystem (vm_mtx). vm_mtx does not recurse and is required for most low level vm operations. faults can not be taken without holding Giant. Memory subsystems can now call the base page allocators safely. Almost all atomic ops were removed as they are covered under the vm mutex. Alpha and ia64 now need to catch up to i386's trap handlers. FFS and NFS have been tested, other filesystems will need minor changes (grabbing the vm lock when twiddling page properties). Reviewed (partially) by: jake, jhb
2001-05-19 01:28:09 +00:00
goto notinmem;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
Use readlocking now that assertions on vm_page_lookup() are relaxed. Sponsored by: EMC / Isilon storage division Reviewed by: alc Tested by: flo, pho
2013-05-17 20:03:55 +00:00
VM_OBJECT_RUNLOCK(obj);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
return 1;
Introduce a global lock for the vm subsystem (vm_mtx). vm_mtx does not recurse and is required for most low level vm operations. faults can not be taken without holding Giant. Memory subsystems can now call the base page allocators safely. Almost all atomic ops were removed as they are covered under the vm mutex. Alpha and ia64 now need to catch up to i386's trap handlers. FFS and NFS have been tested, other filesystems will need minor changes (grabbing the vm lock when twiddling page properties). Reviewed (partially) by: jake, jhb
2001-05-19 01:28:09 +00:00
notinmem:
Use readlocking now that assertions on vm_page_lookup() are relaxed. Sponsored by: EMC / Isilon storage division Reviewed by: alc Tested by: flo, pho
2013-05-17 20:03:55 +00:00
VM_OBJECT_RUNLOCK(obj);
Introduce a global lock for the vm subsystem (vm_mtx). vm_mtx does not recurse and is required for most low level vm operations. faults can not be taken without holding Giant. Memory subsystems can now call the base page allocators safely. Almost all atomic ops were removed as they are covered under the vm mutex. Alpha and ia64 now need to catch up to i386's trap handlers. FFS and NFS have been tested, other filesystems will need minor changes (grabbing the vm lock when twiddling page properties). Reviewed (partially) by: jake, jhb
2001-05-19 01:28:09 +00:00
return (0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
/*
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
* Set the dirty range for a buffer based on the status of the dirty
* bits in the pages comprising the buffer. The range is limited
* to the size of the buffer.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
* Tell the VM system that the pages associated with this buffer
* are clean. This is used for delayed writes where the data is
* going to go to disk eventually without additional VM intevention.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
* Note that while we only really need to clean through to b_bcount, we
* just go ahead and clean through to b_bufsize.
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
*/
static void
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
vfs_clean_pages_dirty_buf(struct buf *bp)
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
{
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
vm_ooffset_t foff, noff, eoff;
vm_page_t m;
int i;
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
if ((bp->b_flags & B_VMIO) == 0 || bp->b_bufsize == 0)
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
return;
Silence warnings.
1999-01-12 11:59:34 +00:00
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
foff = bp->b_offset;
KASSERT(bp->b_offset != NOOFFSET,
("vfs_clean_pages_dirty_buf: no buffer offset"));
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WLOCK(bp->b_bufobj->bo_object);
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
vfs_drain_busy_pages(bp);
Refactor vfs_setdirty(), creating vfs_setdirty_locked_object(). Call vfs_setdirty_locked_object() from vfs_busy_pages() instead of vfs_setdirty(), thereby eliminating a second acquisition and release of the same vm object lock.
2006-10-29 00:04:39 +00:00
vfs_setdirty_locked_object(bp);
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
for (i = 0; i < bp->b_npages; i++) {
noff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK;
eoff = noff;
if (eoff > bp->b_offset + bp->b_bufsize)
eoff = bp->b_offset + bp->b_bufsize;
m = bp->b_pages[i];
vfs_page_set_validclean(bp, foff, m);
/* vm_page_clear_dirty(m, foff & PAGE_MASK, eoff - foff); */
foff = noff;
}
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WUNLOCK(bp->b_bufobj->bo_object);
Refactor vfs_setdirty(), creating vfs_setdirty_locked_object(). Call vfs_setdirty_locked_object() from vfs_busy_pages() instead of vfs_setdirty(), thereby eliminating a second acquisition and release of the same vm object lock.
2006-10-29 00:04:39 +00:00
}
static void
vfs_setdirty_locked_object(struct buf *bp)
{
vm_object_t object;
int i;
object = bp->b_bufobj->bo_object;
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_ASSERT_WLOCKED(object);
Eliminate a comment describing code that was deleted over eight years ago. Move another comment to its proper place. Fix a typo in a third comment.
2009-06-01 06:12:08 +00:00
/*
* We qualify the scan for modified pages on whether the
* object has been flushed yet.
*/
Remove OBJ_CLEANING flag. The vfs_setdirty_locked_object() is the only consumer of the flag, and it used the flag because OBJ_MIGHTBEDIRTY was cleared early in vm_object_page_clean, before the cleaning pass was done. This is no longer true after r216799. Moreover, since OBJ_CLEANING is a flag, and not the counter, it could be reset too prematurely when parallel vm_object_page_clean() are performed. Reviewed by: alc (as a part of the bigger patch) MFC after: 1 month (after r216799 is merged)
2010-12-29 22:26:49 +00:00
if ((object->flags & OBJ_MIGHTBEDIRTY) != 0) {
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
vm_offset_t boffset;
vm_offset_t eoffset;
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
/*
* test the pages to see if they have been modified directly
* by users through the VM system.
*/
Make vm_page's PG_ZERO flag immutable between the time of the page's allocation and deallocation. This flag's principal use is shortly after allocation. For such cases, clearing the flag is pointless. The only unusual use of PG_ZERO is in vfs_bio_clrbuf(). However, allocbuf() never requests a prezeroed page. So, vfs_bio_clrbuf() never sees a prezeroed page. Reviewed by: tegge@
2004-05-06 05:03:23 +00:00
for (i = 0; i < bp->b_npages; i++)
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
vm_page_test_dirty(bp->b_pages[i]);
/*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* Calculate the encompassing dirty range, boffset and eoffset,
* (eoffset - boffset) bytes.
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
*/
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
for (i = 0; i < bp->b_npages; i++) {
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
if (bp->b_pages[i]->dirty)
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
break;
}
Correctly handle misaligned VMIO buffer (whose start or end offset in the VM object are not page aligned). This should fix the mount_msdos panic after a failed attemp to mount as ffs. Reviewed By: Matthew Dillon <dillon@apollo.backplane.com> Archie Cobbs <archie@whistle.com> Dmitrij Tejblum <dima@tejblum.dnttm.rssi.ru>
1998-12-22 14:43:58 +00:00
boffset = (i << PAGE_SHIFT) - (bp->b_offset & PAGE_MASK);
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
for (i = bp->b_npages - 1; i >= 0; --i) {
if (bp->b_pages[i]->dirty) {
break;
}
}
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
eoffset = ((i + 1) << PAGE_SHIFT) - (bp->b_offset & PAGE_MASK);
/*
* Fit it to the buffer.
*/
if (eoffset > bp->b_bcount)
eoffset = bp->b_bcount;
/*
* If we have a good dirty range, merge with the existing
* dirty range.
*/
if (boffset < eoffset) {
if (bp->b_dirtyoff > boffset)
bp->b_dirtyoff = boffset;
if (bp->b_dirtyend < eoffset)
bp->b_dirtyend = eoffset;
}
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
}
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
/*
* Allocate the KVA mapping for an existing buffer. It handles the
* cases of both B_UNMAPPED buffer, and buffer with the preallocated
* KVA which is not mapped (B_KVAALLOC).
*/
static void
bp_unmapped_get_kva(struct buf *bp, daddr_t blkno, int size, int gbflags)
{
struct buf *scratch_bp;
int bsize, maxsize, need_mapping, need_kva;
off_t offset;
need_mapping = (bp->b_flags & B_UNMAPPED) != 0 &&
(gbflags & GB_UNMAPPED) == 0;
need_kva = (bp->b_flags & (B_KVAALLOC | B_UNMAPPED)) == B_UNMAPPED &&
(gbflags & GB_KVAALLOC) != 0;
if (!need_mapping && !need_kva)
return;
BUF_CHECK_UNMAPPED(bp);
if (need_mapping && (bp->b_flags & B_KVAALLOC) != 0) {
/*
* Buffer is not mapped, but the KVA was already
* reserved at the time of the instantiation. Use the
* allocated space.
*/
bp->b_flags &= ~B_KVAALLOC;
KASSERT(bp->b_kvaalloc != 0, ("kvaalloc == 0"));
bp->b_kvabase = bp->b_kvaalloc;
atomic_subtract_long(&unmapped_bufspace, bp->b_kvasize);
goto has_addr;
}
/*
* Calculate the amount of the address space we would reserve
* if the buffer was mapped.
*/
bsize = vn_isdisk(bp->b_vp, NULL) ? DEV_BSIZE : bp->b_bufobj->bo_bsize;
offset = blkno * bsize;
maxsize = size + (offset & PAGE_MASK);
maxsize = imax(maxsize, bsize);
mapping_loop:
if (allocbufkva(bp, maxsize, gbflags)) {
/*
* Request defragmentation. getnewbuf() returns us the
* allocated space by the scratch buffer KVA.
*/
scratch_bp = getnewbuf(bp->b_vp, 0, 0, size, maxsize, gbflags |
(GB_UNMAPPED | GB_KVAALLOC));
if (scratch_bp == NULL) {
if ((gbflags & GB_NOWAIT_BD) != 0) {
/*
* XXXKIB: defragmentation cannot
* succeed, not sure what else to do.
*/
panic("GB_NOWAIT_BD and B_UNMAPPED %p", bp);
}
atomic_add_int(&mappingrestarts, 1);
goto mapping_loop;
}
KASSERT((scratch_bp->b_flags & B_KVAALLOC) != 0,
("scratch bp !B_KVAALLOC %p", scratch_bp));
setbufkva(bp, (vm_offset_t)scratch_bp->b_kvaalloc,
scratch_bp->b_kvasize, gbflags);
/* Get rid of the scratch buffer. */
scratch_bp->b_kvasize = 0;
scratch_bp->b_flags |= B_INVAL;
scratch_bp->b_flags &= ~(B_UNMAPPED | B_KVAALLOC);
brelse(scratch_bp);
}
if (!need_mapping)
return;
has_addr:
bp->b_saveaddr = bp->b_kvabase;
bp->b_data = bp->b_saveaddr; /* b_offset is handled by bpmap_qenter */
bp->b_flags &= ~B_UNMAPPED;
BUF_CHECK_MAPPED(bp);
bpmap_qenter(bp);
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* getblk:
*
* Get a block given a specified block and offset into a file/device.
* The buffers B_DONE bit will be cleared on return, making it almost
* ready for an I/O initiation. B_INVAL may or may not be set on
* return. The caller should clear B_INVAL prior to initiating a
* READ.
*
* For a non-VMIO buffer, B_CACHE is set to the opposite of B_INVAL for
* an existing buffer.
*
* For a VMIO buffer, B_CACHE is modified according to the backing VM.
* If getblk()ing a previously 0-sized invalid buffer, B_CACHE is set
* and then cleared based on the backing VM. If the previous buffer is
* non-0-sized but invalid, B_CACHE will be cleared.
*
* If getblk() must create a new buffer, the new buffer is returned with
* both B_INVAL and B_CACHE clear unless it is a VMIO buffer, in which
* case it is returned with B_INVAL clear and B_CACHE set based on the
* backing VM.
*
Properly vector all bwrite() and BUF_WRITE() calls through the same path and s/BUF_WRITE()/bwrite()/ since it now does the same as bwrite().
2004-03-11 18:02:36 +00:00
* getblk() also forces a bwrite() for any B_DELWRI buffer whos
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* B_CACHE bit is clear.
*
* What this means, basically, is that the caller should use B_CACHE to
* determine whether the buffer is fully valid or not and should clear
* B_INVAL prior to issuing a read. If the caller intends to validate
* the buffer by loading its data area with something, the caller needs
* to clear B_INVAL. If the caller does this without issuing an I/O,
* the caller should set B_CACHE ( as an optimization ), else the caller
* should issue the I/O and biodone() will set B_CACHE if the I/O was
* a write attempt or if it was a successfull read. If the caller
Move B_ERROR flag to b_ioflags and call it BIO_ERROR. (Much of this done by script) Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED. Move b_pblkno and b_iodone_chain to struct bio while we transition, they will be obsoleted once bio structs chain/stack. Add bio_queue field for struct bio aware disksort. Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
* intends to issue a READ, the caller must clear B_INVAL and BIO_ERROR
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* prior to issuing the READ. biodone() will *not* clear B_INVAL.
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct buf *
Some style fixes. Sponsored by: The FreeBSD Foundation
2013-03-14 20:31:39 +00:00
getblk(struct vnode *vp, daddr_t blkno, int size, int slpflag, int slptimeo,
- Add a new 'flags' parameter to getblk(). - Define one flag GB_LOCK_NOWAIT that tells getblk() to pass the LK_NOWAIT flag to the initial BUF_LOCK(). This will eventually be used in cases were we want to use a buffer only if it is not currently in use. - Convert all consumers of the getblk() api to use this extra parameter. Reviwed by: arch Not objected to by: mckusick
2003-03-04 00:04:44 +00:00
int flags)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
struct buf *bp;
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
struct bufobj *bo;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
int bsize, error, maxsize, vmio;
off_t offset;
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
CTR3(KTR_BUF, "getblk(%p, %ld, %d)", vp, (long)blkno, size);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
KASSERT((flags & (GB_UNMAPPED | GB_KVAALLOC)) != GB_KVAALLOC,
("GB_KVAALLOC only makes sense with GB_UNMAPPED"));
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
ASSERT_VOP_LOCKED(vp, "getblk");
Potentially fix a problem, whereby MSDOSFS can request buffers larger than the vfs layer can provide. We now automatically support 32K clusters if MSDOSFS is installed, and panic if a filesystem tries to allocate a buffer larger than MAXBSIZE. This commit is a result of some "prodding" by BDE.
1996-11-28 04:26:04 +00:00
if (size > MAXBSIZE)
panic("getblk: size(%d) > MAXBSIZE(%d)\n", size, MAXBSIZE);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if (!unmapped_buf_allowed)
flags &= ~(GB_UNMAPPED | GB_KVAALLOC);
Potentially fix a problem, whereby MSDOSFS can request buffers larger than the vfs layer can provide. We now automatically support 32K clusters if MSDOSFS is installed, and panic if a filesystem tries to allocate a buffer larger than MAXBSIZE. This commit is a result of some "prodding" by BDE.
1996-11-28 04:26:04 +00:00
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
bo = &vp->v_bufobj;
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
loop:
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
BO_RLOCK(bo);
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
bp = gbincore(bo, blkno);
if (bp != NULL) {
- Add a new 'flags' parameter to getblk(). - Define one flag GB_LOCK_NOWAIT that tells getblk() to pass the LK_NOWAIT flag to the initial BUF_LOCK(). This will eventually be used in cases were we want to use a buffer only if it is not currently in use. - Convert all consumers of the getblk() api to use this extra parameter. Reviwed by: arch Not objected to by: mckusick
2003-03-04 00:04:44 +00:00
int lockflags;
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
Do not call bremfree for managed buffers. Calling bremfree for these buffers results in panic: "bremfree: buffer %p not on a queue." Approved by: kib
2012-05-15 09:55:15 +00:00
* Buffer is in-core. If the buffer is not busy nor managed,
* it must be on a queue.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*/
- Add a new 'flags' parameter to getblk(). - Define one flag GB_LOCK_NOWAIT that tells getblk() to pass the LK_NOWAIT flag to the initial BUF_LOCK(). This will eventually be used in cases were we want to use a buffer only if it is not currently in use. - Convert all consumers of the getblk() api to use this extra parameter. Reviwed by: arch Not objected to by: mckusick
2003-03-04 00:04:44 +00:00
lockflags = LK_EXCLUSIVE | LK_SLEEPFAIL | LK_INTERLOCK;
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
- Add a new 'flags' parameter to getblk(). - Define one flag GB_LOCK_NOWAIT that tells getblk() to pass the LK_NOWAIT flag to the initial BUF_LOCK(). This will eventually be used in cases were we want to use a buffer only if it is not currently in use. - Convert all consumers of the getblk() api to use this extra parameter. Reviwed by: arch Not objected to by: mckusick
2003-03-04 00:04:44 +00:00
if (flags & GB_LOCK_NOWAIT)
lockflags |= LK_NOWAIT;
error = BUF_TIMELOCK(bp, lockflags,
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
BO_LOCKPTR(bo), "getblk", slpflag, slptimeo);
- Add an interlock argument to BUF_LOCK and BUF_TIMELOCK. - Remove the buftimelock mutex and acquire the buf's interlock to protect these fields instead. - Hold the vnode interlock while locking bufs on the clean/dirty queues. This reduces some cases from one BUF_LOCK with a LK_NOWAIT and another BUF_LOCK with a LK_TIMEFAIL to a single lock. Reviewed by: arch, mckusick
2003-02-25 03:37:48 +00:00
/*
* If we slept and got the lock we have to restart in case
* the buffer changed identities.
*/
if (error == ENOLCK)
goto loop;
/* We timed out or were interrupted. */
else if (error)
return (NULL);
Make recursive getblk() slightly more useful. Keep the buffer state intact if getblk() is done on the already owned buffer. Exit from brelse() early when the lock recursion is detected, otherwise brelse() might prematurely destroy the buffer under some circumstances. Sponsored by: The FreeBSD Foundation Noted by: mckusick Tested by: pho MFC after: 2 weeks
2013-02-27 07:34:09 +00:00
/* If recursed, assume caller knows the rules. */
else if (BUF_LOCKRECURSED(bp))
goto end;
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
Convert buffer locking from using the B_BUSY and B_WANTED flags to using lockmgr locks. This commit should be functionally equivalent to the old semantics. That is, all buffer locking is done with LK_EXCLUSIVE requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will be done in future commits.
1999-06-26 02:47:16 +00:00
* The buffer is locked. B_CACHE is cleared if the buffer is
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
* invalid. Otherwise, for a non-VMIO buffer, B_CACHE is set
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* and for a VMIO buffer B_CACHE is adjusted according to the
* backing VM cache.
*/
if (bp->b_flags & B_INVAL)
bp->b_flags &= ~B_CACHE;
Convert buffer locking from using the B_BUSY and B_WANTED flags to using lockmgr locks. This commit should be functionally equivalent to the old semantics. That is, all buffer locking is done with LK_EXCLUSIVE requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will be done in future commits.
1999-06-26 02:47:16 +00:00
else if ((bp->b_flags & (B_VMIO | B_INVAL)) == 0)
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
bp->b_flags |= B_CACHE;
Do not call bremfree for managed buffers. Calling bremfree for these buffers results in panic: "bremfree: buffer %p not on a queue." Approved by: kib
2012-05-15 09:55:15 +00:00
if (bp->b_flags & B_MANAGED)
MPASS(bp->b_qindex == QUEUE_NONE);
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
else
Do not call bremfree for managed buffers. Calling bremfree for these buffers results in panic: "bremfree: buffer %p not on a queue." Approved by: kib
2012-05-15 09:55:15 +00:00
bremfree(bp);
Fix a problem with the VN device. Specifically, the VN device can cause a problem of spiraling death due to buffer resource limitations. The vfs_bio code in general had little ability to handle buffer resource management, and now it does. Also, there are a lot more knobs for tuning the vfs_bio code now. The knobs came free because of the need that there always be some immediately available buffers (non-delayed or locked) for use. Note that the buffer cache code is much less likely to get bogged down with lots of delayed writes, even more so than before.
1997-06-15 17:56:53 +00:00
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/*
Some style fixes. Sponsored by: The FreeBSD Foundation
2013-03-14 20:31:39 +00:00
* check for size inconsistencies for non-VMIO case.
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
*/
if (bp->b_bcount != size) {
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
if ((bp->b_flags & B_VMIO) == 0 ||
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
(size > bp->b_kvasize)) {
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
if (bp->b_flags & B_DELWRI) {
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
/*
* If buffer is pinned and caller does
* not want sleep waiting for it to be
* unpinned, bail out
* */
if (bp->b_pin_count > 0) {
if (flags & GB_LOCK_NOWAIT) {
bqrelse(bp);
return (NULL);
} else {
bunpin_wait(bp);
}
}
Correct a problem where data OR metadata could be thrown away if a buffer is grown.
1998-03-17 17:36:05 +00:00
bp->b_flags |= B_NOCACHE;
Properly vector all bwrite() and BUF_WRITE() calls through the same path and s/BUF_WRITE()/bwrite()/ since it now does the same as bwrite().
2004-03-11 18:02:36 +00:00
bwrite(bp);
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
} else {
Use LIST_EMPTY() instead of unrolled version (LIST_FIRST() [!=]= NULL)
2007-02-22 14:52:59 +00:00
if (LIST_EMPTY(&bp->b_dep)) {
Correct a problem where data OR metadata could be thrown away if a buffer is grown.
1998-03-17 17:36:05 +00:00
bp->b_flags |= B_RELBUF;
brelse(bp);
} else {
bp->b_flags |= B_NOCACHE;
Properly vector all bwrite() and BUF_WRITE() calls through the same path and s/BUF_WRITE()/bwrite()/ since it now does the same as bwrite().
2004-03-11 18:02:36 +00:00
bwrite(bp);
Correct a problem where data OR metadata could be thrown away if a buffer is grown.
1998-03-17 17:36:05 +00:00
}
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
}
These changes fix a bug in the clustering code that I made worse when adding support for EXT2FS. Note that the Sig-11 problems appear to be caused by this, but there is still probably an underlying VM problem that let this clustering bug cause vnode objects to appear to be corrupted. The direct manifestation of this bug would have been severely mis-read files. It is possible that processes would Sig-11 on very damaged input files and might explain the mysterious differences in system behaviour when phk's malloc is being used.
1995-09-23 21:12:45 +00:00
goto loop;
}
}
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
/*
* Handle the case of unmapped buffer which should
* become mapped, or the buffer for which KVA
* reservation is requested.
*/
bp_unmapped_get_kva(bp, blkno, size, flags);
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
/*
* If the size is inconsistant in the VMIO case, we can resize
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* the buffer. This might lead to B_CACHE getting set or
* cleared. If the size has not changed, B_CACHE remains
* unchanged from its previous state.
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
*/
if (bp->b_bcount != size)
allocbuf(bp, size);
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
KASSERT(bp->b_offset != NOOFFSET,
KNFize, by bde.
1999-01-10 01:58:29 +00:00
("getblk: no buffer offset"));
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
/*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* A buffer with B_DELWRI set and B_CACHE clear must
* be committed before we can return the buffer in
* order to prevent the caller from issuing a read
* ( due to B_CACHE not being set ) and overwriting
* it.
Fix an expression parenthesization typo in a conditional. It should not have any operational effects other then to make the code in question a little faster. Also added a more involved comment.
1999-01-23 06:36:15 +00:00
*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* Most callers, including NFS and FFS, need this to
* operate properly either because they assume they
* can issue a read if B_CACHE is not set, or because
* ( for example ) an uncached B_DELWRI might loop due
* to softupdates re-dirtying the buffer. In the latter
* case, B_CACHE is set after the first write completes,
* preventing further loops.
This fixes a large number of bugs in our NFS client side code. A recent commit by Kirk also fixed a softupdates bug that could easily be triggered by server side NFS. * An edge case with shared R+W mmap()'s and truncate whereby the system would inappropriately clear the dirty bits on still-dirty data. (applicable to all filesystems) THIS FIX TEMPORARILY DISABLED PENDING FURTHER TESTING. see vm/vm_page.c line 1641 * The straddle case for VM pages and buffer cache buffers when truncating. (applicable to NFS client side) * Possible SMP database corruption due to vm_pager_unmap_page() not clearing the TLB for the other cpu's. (applicable to NFS client side but could effect all filesystems). Note: not considered serious since the corruption occurs beyond the file EOF. * When flusing a dirty buffer due to B_CACHE getting cleared, we were accidently setting B_CACHE again (that is, bwrite() sets B_CACHE), when we really want it to stay clear after the write is complete. This resulted in a corrupt buffer. (applicable to all filesystems but probably only triggered by NFS) * We have to call vtruncbuf() when ftruncate()ing to remove any buffer cache buffers. This is still tentitive, I may be able to remove it due to the second bug fix. (applicable to NFS client side) * vnode_pager_setsize() race against nfs_vinvalbuf()... we have to set n_size before calling nfs_vinvalbuf or the NFS code may recursively vnode_pager_setsize() to the original value before the truncate. This is what was causing the user mmap bus faults in the nfs tester program. (applicable to NFS client side) * Fix to softupdates (see ufs/ffs/ffs_inode.c 1.73, commit made by Kirk). Testing program written by: Avadis Tevanian, Jr. Testing program supplied by: jkh / Apple (see Dec2001 posting to freebsd-hackers with Subject 'NFS: How to make FreeBS fall on its face in one easy step') MFC after: 1 week
2001-12-14 01:16:57 +00:00
* NOTE! b*write() sets B_CACHE. If we cleared B_CACHE
* above while extending the buffer, we cannot allow the
* buffer to remain with B_CACHE set after the write
* completes or it will represent a corrupt state. To
* deal with this we set B_NOCACHE to scrap the buffer
* after the write.
*
* We might be able to do something fancy, like setting
* B_CACHE in bwrite() except if B_DELWRI is already set,
* so the below call doesn't set B_CACHE, but that gets real
* confusing. This is much easier.
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
*/
if ((bp->b_flags & (B_CACHE|B_DELWRI)) == B_DELWRI) {
This fixes a large number of bugs in our NFS client side code. A recent commit by Kirk also fixed a softupdates bug that could easily be triggered by server side NFS. * An edge case with shared R+W mmap()'s and truncate whereby the system would inappropriately clear the dirty bits on still-dirty data. (applicable to all filesystems) THIS FIX TEMPORARILY DISABLED PENDING FURTHER TESTING. see vm/vm_page.c line 1641 * The straddle case for VM pages and buffer cache buffers when truncating. (applicable to NFS client side) * Possible SMP database corruption due to vm_pager_unmap_page() not clearing the TLB for the other cpu's. (applicable to NFS client side but could effect all filesystems). Note: not considered serious since the corruption occurs beyond the file EOF. * When flusing a dirty buffer due to B_CACHE getting cleared, we were accidently setting B_CACHE again (that is, bwrite() sets B_CACHE), when we really want it to stay clear after the write is complete. This resulted in a corrupt buffer. (applicable to all filesystems but probably only triggered by NFS) * We have to call vtruncbuf() when ftruncate()ing to remove any buffer cache buffers. This is still tentitive, I may be able to remove it due to the second bug fix. (applicable to NFS client side) * vnode_pager_setsize() race against nfs_vinvalbuf()... we have to set n_size before calling nfs_vinvalbuf or the NFS code may recursively vnode_pager_setsize() to the original value before the truncate. This is what was causing the user mmap bus faults in the nfs tester program. (applicable to NFS client side) * Fix to softupdates (see ufs/ffs/ffs_inode.c 1.73, commit made by Kirk). Testing program written by: Avadis Tevanian, Jr. Testing program supplied by: jkh / Apple (see Dec2001 posting to freebsd-hackers with Subject 'NFS: How to make FreeBS fall on its face in one easy step') MFC after: 1 week
2001-12-14 01:16:57 +00:00
bp->b_flags |= B_NOCACHE;
Properly vector all bwrite() and BUF_WRITE() calls through the same path and s/BUF_WRITE()/bwrite()/ since it now does the same as bwrite().
2004-03-11 18:02:36 +00:00
bwrite(bp);
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
goto loop;
}
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
bp->b_flags &= ~B_DONE;
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
} else {
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* Buffer is not in-core, create new buffer. The buffer
Convert buffer locking from using the B_BUSY and B_WANTED flags to using lockmgr locks. This commit should be functionally equivalent to the old semantics. That is, all buffer locking is done with LK_EXCLUSIVE requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will be done in future commits.
1999-06-26 02:47:16 +00:00
* returned by getnewbuf() is locked. Note that the returned
* buffer is also considered valid (not marked B_INVAL).
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*/
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
BO_RUNLOCK(bo);
- Define a new flag for getblk(): GB_NOCREAT. This flag causes getblk() to bail out if the buffer is not already present. - The buffer returned by incore() is not locked and should not be sent to brelse(). Use getblk() with the new GB_NOCREAT flag to preserve the desired semantics.
2003-08-31 08:50:11 +00:00
/*
* If the user does not want us to create the buffer, bail out
* here.
*/
- Remove long dead splbio() calls and comments relating to the old synchronization mechanism.
2005-04-30 12:18:50 +00:00
if (flags & GB_NOCREAT)
- Define a new flag for getblk(): GB_NOCREAT. This flag causes getblk() to bail out if the buffer is not already present. - The buffer returned by incore() is not locked and should not be sent to brelse(). Use getblk() with the new GB_NOCREAT flag to preserve the desired semantics.
2003-08-31 08:50:11 +00:00
return NULL;
- Consolidate duplicate code into support functions. - Split the bqlock into bqclean and bqdirty locks. - Only acquire the wakeup synchronization locks when we cross a threshold requiring them. - Restructure the way flushbufqueues() targets work so they are more smp friendly and sane. Reviewed by: kib Discussed with: mckusick, attilio Sponsored by: EMC / Isilon Storage Division M vfs_bio.c
2013-06-05 23:53:00 +00:00
if (numfreebuffers == 0 && TD_IS_IDLETHREAD(curthread))
return NULL;
bo_bsize: revert r205860 and take an alternative approch in getblk In r205860 I missed the fact that there is code that strongly assumes that devvp bo_bsize is equal to underlying provider's sectorsize. In those places it is hard to obtain the sectorsize in an alternative way if devvp bo_bsize is set to something else. So, I am reverting bo_bsize assigment in g_vfs_open. Instead, in getblk I use DEV_BSIZE block size for b_offset calculation if vp is a disk vp as reported by vn_isdisk. This should coinside with vp being a devvp. Reported by: Mykola Dzham <i@levsha.me> Tested by: Mykola Dzham <i@levsha.me> Pointyhat to: avg MFC after: 2 weeks X-ToDo: convert bread(devvp) in all fs to use bo_bsize-d blocks
2010-04-02 15:12:31 +00:00
bsize = vn_isdisk(vp, NULL) ? DEV_BSIZE : bo->bo_bsize;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
offset = blkno * bsize;
Don't use VOP_GETVOBJECT, use vp->v_object directly.
2005-01-25 00:40:01 +00:00
vmio = vp->v_object != NULL;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if (vmio) {
maxsize = size + (offset & PAGE_MASK);
} else {
maxsize = size;
/* Do not allow non-VMIO notmapped buffers. */
flags &= ~GB_UNMAPPED;
}
Correctly handle misaligned VMIO buffer (whose start or end offset in the VM object are not page aligned). This should fix the mount_msdos panic after a failed attemp to mount as ffs. Reviewed By: Matthew Dillon <dillon@apollo.backplane.com> Archie Cobbs <archie@whistle.com> Dmitrij Tejblum <dima@tejblum.dnttm.rssi.ru>
1998-12-22 14:43:58 +00:00
maxsize = imax(maxsize, bsize);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
bp = getnewbuf(vp, slpflag, slptimeo, size, maxsize, flags);
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
if (bp == NULL) {
- Remove long dead splbio() calls and comments relating to the old synchronization mechanism.
2005-04-30 12:18:50 +00:00
if (slpflag || slptimeo)
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
return NULL;
goto loop;
}
Changes from John Dyson and myself: Fixed remaining known bugs in the buffer IO and VM system. vfs_bio.c: Fixed some race conditions and locking bugs. Improved performance by removing some (now) unnecessary code and fixing some broken logic. Fixed process accounting of # of FS outputs. Properly handle NFS interrupts (B_EINTR). (various) Replaced calls to clrbuf() with calls to an optimized routine call vfs_bio_clrbuf(). (various FS sync) Sync out modified vnode_pager backed pages. ffs_vnops.c: Do two passes: Sync out file data first, then indirect blocks. vm_fault.c: Fixed deadly embrace caused by acquiring locks in the wrong order. vnode_pager.c: Changed to use buffer I/O system for writing out modified pages. This should fix the problem with the modification date previous not getting updated. Also dramatically simplifies the code. Note that this is going to change in the future and be implemented via VOP_PUTPAGES(). vm_object.c: Fixed a pile of bugs related to cleaning (vnode) objects. The performance of vm_object_page_clean() is terrible when dealing with huge objects, but this will change when we implement a binary tree to keep the object pages sorted. vm_pageout.c: Fixed broken clustering of pageouts. Fixed race conditions and other lockup style bugs in the scanning of pages. Improved performance.
1995-04-09 06:02:46 +00:00
Added some code to make sure that buffers associated with directories and metadata aren't thrashed by regular file I/O. Added mechanism to limit the amount of outstanding I/O on a given vnode. Pagedaemon wakeup policy changed to skew priority a little in favor of file caching. Slight code reorganization to improve clarity. Added a few more comments. Submitted by: John Dyson
1995-02-22 09:30:13 +00:00
/*
Changes from John Dyson and myself: Fixed remaining known bugs in the buffer IO and VM system. vfs_bio.c: Fixed some race conditions and locking bugs. Improved performance by removing some (now) unnecessary code and fixing some broken logic. Fixed process accounting of # of FS outputs. Properly handle NFS interrupts (B_EINTR). (various) Replaced calls to clrbuf() with calls to an optimized routine call vfs_bio_clrbuf(). (various FS sync) Sync out modified vnode_pager backed pages. ffs_vnops.c: Do two passes: Sync out file data first, then indirect blocks. vm_fault.c: Fixed deadly embrace caused by acquiring locks in the wrong order. vnode_pager.c: Changed to use buffer I/O system for writing out modified pages. This should fix the problem with the modification date previous not getting updated. Also dramatically simplifies the code. Note that this is going to change in the future and be implemented via VOP_PUTPAGES(). vm_object.c: Fixed a pile of bugs related to cleaning (vnode) objects. The performance of vm_object_page_clean() is terrible when dealing with huge objects, but this will change when we implement a binary tree to keep the object pages sorted. vm_pageout.c: Fixed broken clustering of pageouts. Fixed race conditions and other lockup style bugs in the scanning of pages. Improved performance.
1995-04-09 06:02:46 +00:00
* This code is used to make sure that a buffer is not
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
* created while the getnewbuf routine is blocked.
Make comment match code.
1999-03-02 21:23:38 +00:00
* This can be a problem whether the vnode is locked or not.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* If the buffer is created out from under us, we have to
- Remove long dead splbio() calls and comments relating to the old synchronization mechanism.
2005-04-30 12:18:50 +00:00
* throw away the one we just created.
Replace the global buffer hash table with per-vnode splay trees using a methodology similar to the vm_map_entry splay and the VM splay that Alan Cox is working on. Extensive testing has appeared to have shown no increase in overhead. Disadvantages Dirties more cache lines during lookups. Not as fast as a hash table lookup (but still N log N and optimal when there is locality of reference). Advantages vnode->v_dirtyblkhd is now perfectly sorted, making fsync/sync/filesystem syncer operate more efficiently. I get to rip out all the old hacks (some of which were mine) that tried to keep the v_dirtyblkhd tailq sorted. The per-vnode splay tree should be easier to lock / SMPng pushdown on vnodes will be easier. This commit along with another that Alan is working on for the VM page global hash table will allow me to implement ranged fsync(), optimize server-side nfs commit rpcs, and implement partial syncs by the filesystem syncer (aka filesystem syncer would detect that someone is trying to get the vnode lock, remembers its place, and skip to the next vnode). Note that the buffer cache splay is somewhat more complex then other splays due to special handling of background bitmap writes (multiple buffers with the same lblkno in the same vnode), and B_INVAL discontinuities between the old hash table and the existence of the buffer on the v_cleanblkhd list. Suggested by: alc
2002-07-10 17:02:32 +00:00
*
* Note: this must occur before we associate the buffer
* with the vp especially considering limitations in
* the splay tree implementation when dealing with duplicate
* lblkno's.
Added some code to make sure that buffers associated with directories and metadata aren't thrashed by regular file I/O. Added mechanism to limit the amount of outstanding I/O on a given vnode. Pagedaemon wakeup policy changed to skew priority a little in favor of file caching. Slight code reorganization to improve clarity. Added a few more comments. Submitted by: John Dyson
1995-02-22 09:30:13 +00:00
*/
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
BO_LOCK(bo);
if (gbincore(bo, blkno)) {
BO_UNLOCK(bo);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
bp->b_flags |= B_INVAL;
brelse(bp);
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
goto loop;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
Changes from John Dyson and myself: Fixed remaining known bugs in the buffer IO and VM system. vfs_bio.c: Fixed some race conditions and locking bugs. Improved performance by removing some (now) unnecessary code and fixing some broken logic. Fixed process accounting of # of FS outputs. Properly handle NFS interrupts (B_EINTR). (various) Replaced calls to clrbuf() with calls to an optimized routine call vfs_bio_clrbuf(). (various FS sync) Sync out modified vnode_pager backed pages. ffs_vnops.c: Do two passes: Sync out file data first, then indirect blocks. vm_fault.c: Fixed deadly embrace caused by acquiring locks in the wrong order. vnode_pager.c: Changed to use buffer I/O system for writing out modified pages. This should fix the problem with the modification date previous not getting updated. Also dramatically simplifies the code. Note that this is going to change in the future and be implemented via VOP_PUTPAGES(). vm_object.c: Fixed a pile of bugs related to cleaning (vnode) objects. The performance of vm_object_page_clean() is terrible when dealing with huge objects, but this will change when we implement a binary tree to keep the object pages sorted. vm_pageout.c: Fixed broken clustering of pageouts. Fixed race conditions and other lockup style bugs in the scanning of pages. Improved performance.
1995-04-09 06:02:46 +00:00
Added some code to make sure that buffers associated with directories and metadata aren't thrashed by regular file I/O. Added mechanism to limit the amount of outstanding I/O on a given vnode. Pagedaemon wakeup policy changed to skew priority a little in favor of file caching. Slight code reorganization to improve clarity. Added a few more comments. Submitted by: John Dyson
1995-02-22 09:30:13 +00:00
/*
* Insert the buffer into the hash, so that it can
* be found by incore.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
bp->b_blkno = bp->b_lblkno = blkno;
Correctly handle misaligned VMIO buffer (whose start or end offset in the VM object are not page aligned). This should fix the mount_msdos panic after a failed attemp to mount as ffs. Reviewed By: Matthew Dillon <dillon@apollo.backplane.com> Archie Cobbs <archie@whistle.com> Dmitrij Tejblum <dima@tejblum.dnttm.rssi.ru>
1998-12-22 14:43:58 +00:00
bp->b_offset = offset;
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
bgetvp(vp, bp);
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
BO_UNLOCK(bo);
Added some code to make sure that buffers associated with directories and metadata aren't thrashed by regular file I/O. Added mechanism to limit the amount of outstanding I/O on a given vnode. Pagedaemon wakeup policy changed to skew priority a little in favor of file caching. Slight code reorganization to improve clarity. Added a few more comments. Submitted by: John Dyson
1995-02-22 09:30:13 +00:00
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* set B_VMIO bit. allocbuf() the buffer bigger. Since the
* buffer size starts out as 0, B_CACHE will be set by
* allocbuf() for the VMIO case prior to it testing the
* backing store for validity.
*/
Correctly handle misaligned VMIO buffer (whose start or end offset in the VM object are not page aligned). This should fix the mount_msdos panic after a failed attemp to mount as ffs. Reviewed By: Matthew Dillon <dillon@apollo.backplane.com> Archie Cobbs <archie@whistle.com> Dmitrij Tejblum <dima@tejblum.dnttm.rssi.ru>
1998-12-22 14:43:58 +00:00
if (vmio) {
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
bp->b_flags |= B_VMIO;
Don't use VOP_GETVOBJECT, use vp->v_object directly.
2005-01-25 00:40:01 +00:00
KASSERT(vp->v_object == bp->b_bufobj->bo_object,
Change buf->b_object to buf->b_bufobj->bo_object some whitespace fixes.
2004-11-04 09:06:54 +00:00
("ARGH! different b_bufobj->bo_object %p %p %p\n",
Don't use VOP_GETVOBJECT, use vp->v_object directly.
2005-01-25 00:40:01 +00:00
bp, vp->v_object, bp->b_bufobj->bo_object));
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
} else {
bp->b_flags &= ~B_VMIO;
Change buf->b_object to buf->b_bufobj->bo_object some whitespace fixes.
2004-11-04 09:06:54 +00:00
KASSERT(bp->b_bufobj->bo_object == NULL,
("ARGH! has b_bufobj->bo_object %p %p\n",
bp, bp->b_bufobj->bo_object));
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
BUF_CHECK_MAPPED(bp);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
Added some code to make sure that buffers associated with directories and metadata aren't thrashed by regular file I/O. Added mechanism to limit the amount of outstanding I/O on a given vnode. Pagedaemon wakeup policy changed to skew priority a little in favor of file caching. Slight code reorganization to improve clarity. Added a few more comments. Submitted by: John Dyson
1995-02-22 09:30:13 +00:00
Changes from John Dyson and myself: Fixed remaining known bugs in the buffer IO and VM system. vfs_bio.c: Fixed some race conditions and locking bugs. Improved performance by removing some (now) unnecessary code and fixing some broken logic. Fixed process accounting of # of FS outputs. Properly handle NFS interrupts (B_EINTR). (various) Replaced calls to clrbuf() with calls to an optimized routine call vfs_bio_clrbuf(). (various FS sync) Sync out modified vnode_pager backed pages. ffs_vnops.c: Do two passes: Sync out file data first, then indirect blocks. vm_fault.c: Fixed deadly embrace caused by acquiring locks in the wrong order. vnode_pager.c: Changed to use buffer I/O system for writing out modified pages. This should fix the problem with the modification date previous not getting updated. Also dramatically simplifies the code. Note that this is going to change in the future and be implemented via VOP_PUTPAGES(). vm_object.c: Fixed a pile of bugs related to cleaning (vnode) objects. The performance of vm_object_page_clean() is terrible when dealing with huge objects, but this will change when we implement a binary tree to keep the object pages sorted. vm_pageout.c: Fixed broken clustering of pageouts. Fixed race conditions and other lockup style bugs in the scanning of pages. Improved performance.
1995-04-09 06:02:46 +00:00
allocbuf(bp, size);
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
bp->b_flags &= ~B_DONE;
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
}
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
CTR4(KTR_BUF, "getblk(%p, %ld, %d) = %p", vp, (long)blkno, size, bp);
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
Make recursive getblk() slightly more useful. Keep the buffer state intact if getblk() is done on the already owned buffer. Exit from brelse() early when the lock recursion is detected, otherwise brelse() might prematurely destroy the buffer under some circumstances. Sponsored by: The FreeBSD Foundation Noted by: mckusick Tested by: pho MFC after: 2 weeks
2013-02-27 07:34:09 +00:00
end:
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
KASSERT(bp->b_bufobj == bo,
- Add and enhance asserts related to the wrong bufobj panic. Sponsored by: Isilon Systems, Inc. Approved by: re (blanket vfs)
2005-06-14 20:32:27 +00:00
("bp %p wrong b_bufobj %p should be %p", bp, bp->b_bufobj, bo));
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
return (bp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* Get an empty, disassociated buffer of given size. The buffer is initially
* set to B_INVAL.
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
*/
struct buf *
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
geteblk(int size, int flags)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
struct buf *bp;
Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a fragmentation problem due to geteblk() reserving too much space for the buffer and imposes a larger granularity (16K) on KVA reservations for the buffer cache to avoid fragmentation issues. The buffer cache size calculations have been redone to simplify them (fewer defines, better comments, less chance of running out of KVA). The geteblk() fix solves a performance problem that DG was able reproduce. This patch does not completely fix the KVA fragmentation problems, but it goes a long way Mostly Reviewed by: bde and others Approved by: jkh
2000-03-27 21:29:33 +00:00
int maxsize;
maxsize = (size + BKVAMASK) & ~BKVAMASK;
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
while ((bp = getnewbuf(NULL, 0, 0, size, maxsize, flags)) == NULL) {
if ((flags & GB_NOWAIT_BD) &&
(curthread->td_pflags & TDP_BUFNEED) != 0)
return (NULL);
}
Removed third arg (vmio) to allocbuf() that was added with the original merged cache changes, and figure it out based on the B_VMIO buffer flag. Fixes a problem where delayed write VMIO buffers would sometimes get recopied into kernel-alloced memory. Submitted by: John Dyson
1995-03-26 23:29:13 +00:00
allocbuf(bp, size);
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
bp->b_flags |= B_INVAL; /* b_dep cleared by getnewbuf() */
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
return (bp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/*
Only do object paging_in_progress wakeups if someone is waiting on this condition. Added some comments. Submitted by: John Dyson
1995-02-22 09:16:07 +00:00
* This code constitutes the buffer memory from either anonymous system
* memory (in the case of non-VMIO operations) or from an associated
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
* VM object (in the case of VMIO operations). This code is able to
* resize a buffer up or down.
Only do object paging_in_progress wakeups if someone is waiting on this condition. Added some comments. Submitted by: John Dyson
1995-02-22 09:16:07 +00:00
*
* Note that this code is tricky, and has many complications to resolve
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
* deadlock or inconsistant data situations. Tread lightly!!!
* There are B_CACHE and B_DELWRI interactions that must be dealt with by
* the caller. Calling this code willy nilly can result in the loss of data.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* allocbuf() only adjusts B_CACHE for VMIO buffers. getblk() deals with
* B_CACHE for the non-VMIO case.
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
*/
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
int
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
allocbuf(struct buf *bp, int size)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Improvements to the cluster code, minor vfs_bio efficiency: Better performance -- more aggressive read-ahead under certain circumstanses. Mods to support clustering on small ( < PAGE_SIZE) block size filesystems (e.g. ext2fs, msdosfs.)
1995-09-03 19:56:15 +00:00
int newbsize, mbsize;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
int i;
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
Fixed broken offset use in vfs_unbusy_pages() which resulted in several different types of panics/inconsistencies with NFS clients. Cleared PG_WANTED where appropriate. Added checks for buffer busy in allocbuf and biodone. Reviewed by: John Dyson
1995-07-25 05:03:06 +00:00
Implement a new totally dynamic (up to MAXPHYS) buffer kva allocation scheme. Additionally, add the capability for checking for unexpected kernel page faults. The maximum amount of kva space for buffers hasn't been decreased from where it is, but it will now be possible to do so. This scheme manages the kva space similar to the buffers themselves. If there isn't enough kva space because of usage or fragementation, buffers will be reclaimed until a buffer allocation is successful. This scheme should be very resistant to fragmentation problems until/if the LFS code is fixed and uses the bogus buffer locking scheme -- but a 'fixed' LFS is not likely to use such a scheme. Now there should be NO problem allocating buffers up to MAXPHYS.
1996-11-30 22:41:49 +00:00
if (bp->b_kvasize < size)
panic("allocbuf: buffer too small");
Changes from John Dyson and myself: Fixed remaining known bugs in the buffer IO and VM system. vfs_bio.c: Fixed some race conditions and locking bugs. Improved performance by removing some (now) unnecessary code and fixing some broken logic. Fixed process accounting of # of FS outputs. Properly handle NFS interrupts (B_EINTR). (various) Replaced calls to clrbuf() with calls to an optimized routine call vfs_bio_clrbuf(). (various FS sync) Sync out modified vnode_pager backed pages. ffs_vnops.c: Do two passes: Sync out file data first, then indirect blocks. vm_fault.c: Fixed deadly embrace caused by acquiring locks in the wrong order. vnode_pager.c: Changed to use buffer I/O system for writing out modified pages. This should fix the problem with the modification date previous not getting updated. Also dramatically simplifies the code. Note that this is going to change in the future and be implemented via VOP_PUTPAGES(). vm_object.c: Fixed a pile of bugs related to cleaning (vnode) objects. The performance of vm_object_page_clean() is terrible when dealing with huge objects, but this will change when we implement a binary tree to keep the object pages sorted. vm_pageout.c: Fixed broken clustering of pageouts. Fixed race conditions and other lockup style bugs in the scanning of pages. Improved performance.
1995-04-09 06:02:46 +00:00
if ((bp->b_flags & B_VMIO) == 0) {
1) Fix a bug that a buffer is removed from a queue, but the queue type is not set to QUEUE_NONE. This appears to have caused a hang bug that has been lurking. 2) Fix bugs that brelse'ing locked buffers do not "free" them, but the code assumes so. This can cause hangs when LFS is used. 3) Use malloced memory for directories when applicable. The amount of malloced memory is seriously limited, but should decrease the amount of memory used by an average directory to 1/4 - 1/2 previous. This capability is fully tunable. (Note that there is no config parameter, and might never be.) 4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since the data in VMIO buffers is not lost when the buffer is reclaimed, this will help performance. This is adjustable also.
1996-03-02 04:40:56 +00:00
caddr_t origbuf;
int origbufsize;
Only do object paging_in_progress wakeups if someone is waiting on this condition. Added some comments. Submitted by: John Dyson
1995-02-22 09:16:07 +00:00
/*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* Just get anonymous memory from the kernel. Don't
* mess with B_CACHE.
Only do object paging_in_progress wakeups if someone is waiting on this condition. Added some comments. Submitted by: John Dyson
1995-02-22 09:16:07 +00:00
*/
Changes to support 1Tb filesizes. Pages are now named by an (object,index) pair instead of (object,offset) pair.
1995-12-11 04:58:34 +00:00
mbsize = (size + DEV_BSIZE - 1) & ~(DEV_BSIZE - 1);
1) Fix a bug that a buffer is removed from a queue, but the queue type is not set to QUEUE_NONE. This appears to have caused a hang bug that has been lurking. 2) Fix bugs that brelse'ing locked buffers do not "free" them, but the code assumes so. This can cause hangs when LFS is used. 3) Use malloced memory for directories when applicable. The amount of malloced memory is seriously limited, but should decrease the amount of memory used by an average directory to 1/4 - 1/2 previous. This capability is fully tunable. (Note that there is no config parameter, and might never be.) 4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since the data in VMIO buffers is not lost when the buffer is reclaimed, this will help performance. This is adjustable also.
1996-03-02 04:40:56 +00:00
if (bp->b_flags & B_MALLOC)
newbsize = mbsize;
else
newbsize = round_page(size);
Fixed a variety of deadlock and panic bugs, removed the bypass code, and implemented the ability to limit bufferspace by memory consumed. (vfs_bio.c) Fixed recently introduced bugs that caused extra I/O to happen in some cases. (vfs_cluster.c) Submitted by: John Dyson
1995-01-24 10:00:46 +00:00
Fixed "bufspace" calculation. It was lossy in some circumstances of the buffer resizing and caused a "newbuf" deadlock. Reviewed by: John Dyson & David Greenman Submitted by: Peter Wemm
1995-07-17 06:26:07 +00:00
if (newbsize < bp->b_bufsize) {
1) Fix a bug that a buffer is removed from a queue, but the queue type is not set to QUEUE_NONE. This appears to have caused a hang bug that has been lurking. 2) Fix bugs that brelse'ing locked buffers do not "free" them, but the code assumes so. This can cause hangs when LFS is used. 3) Use malloced memory for directories when applicable. The amount of malloced memory is seriously limited, but should decrease the amount of memory used by an average directory to 1/4 - 1/2 previous. This capability is fully tunable. (Note that there is no config parameter, and might never be.) 4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since the data in VMIO buffers is not lost when the buffer is reclaimed, this will help performance. This is adjustable also.
1996-03-02 04:40:56 +00:00
/*
* malloced buffers are not shrunk
*/
if (bp->b_flags & B_MALLOC) {
if (newbsize) {
bp->b_bcount = size;
} else {
Add separate kmalloc classes for BIO buffers and Ktrace info.
1996-08-04 20:13:08 +00:00
free(bp->b_data, M_BIOBUF);
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
if (bp->b_bufsize) {
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
atomic_subtract_long(
- Correct another atomic op. Spotted by: alc
2003-02-09 22:39:51 +00:00
&bufmallocspace,
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
bp->b_bufsize);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
bufspacewakeup();
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
bp->b_bufsize = 0;
}
Initialize b_saveaddr when we hand out buffers
2003-06-20 08:26:38 +00:00
bp->b_saveaddr = bp->b_kvabase;
bp->b_data = bp->b_saveaddr;
1) Fix a bug that a buffer is removed from a queue, but the queue type is not set to QUEUE_NONE. This appears to have caused a hang bug that has been lurking. 2) Fix bugs that brelse'ing locked buffers do not "free" them, but the code assumes so. This can cause hangs when LFS is used. 3) Use malloced memory for directories when applicable. The amount of malloced memory is seriously limited, but should decrease the amount of memory used by an average directory to 1/4 - 1/2 previous. This capability is fully tunable. (Note that there is no config parameter, and might never be.) 4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since the data in VMIO buffers is not lost when the buffer is reclaimed, this will help performance. This is adjustable also.
1996-03-02 04:40:56 +00:00
bp->b_bcount = 0;
bp->b_flags &= ~B_MALLOC;
}
return 1;
}
Change the implementation of vm_hold_free_pages() so that it performs at most one call to pmap_qremove(), and thus one TLB shootdown, instead of one call and TLB shootdown per page. Simplify the interface to vm_hold_free_pages(). MFC after: 3 weeks
2010-07-11 20:11:44 +00:00
vm_hold_free_pages(bp, newbsize);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
} else if (newbsize > bp->b_bufsize) {
1) Fix a bug that a buffer is removed from a queue, but the queue type is not set to QUEUE_NONE. This appears to have caused a hang bug that has been lurking. 2) Fix bugs that brelse'ing locked buffers do not "free" them, but the code assumes so. This can cause hangs when LFS is used. 3) Use malloced memory for directories when applicable. The amount of malloced memory is seriously limited, but should decrease the amount of memory used by an average directory to 1/4 - 1/2 previous. This capability is fully tunable. (Note that there is no config parameter, and might never be.) 4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since the data in VMIO buffers is not lost when the buffer is reclaimed, this will help performance. This is adjustable also.
1996-03-02 04:40:56 +00:00
/*
* We only use malloced memory on the first allocation.
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
* and revert to page-allocated memory when the buffer
* grows.
1) Fix a bug that a buffer is removed from a queue, but the queue type is not set to QUEUE_NONE. This appears to have caused a hang bug that has been lurking. 2) Fix bugs that brelse'ing locked buffers do not "free" them, but the code assumes so. This can cause hangs when LFS is used. 3) Use malloced memory for directories when applicable. The amount of malloced memory is seriously limited, but should decrease the amount of memory used by an average directory to 1/4 - 1/2 previous. This capability is fully tunable. (Note that there is no config parameter, and might never be.) 4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since the data in VMIO buffers is not lost when the buffer is reclaimed, this will help performance. This is adjustable also.
1996-03-02 04:40:56 +00:00
*/
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
/*
* There is a potential smp race here that could lead
* to bufmallocspace slightly passing the max. It
* is probably extremely rare and not worth worrying
* over.
*/
1) Fix a bug that a buffer is removed from a queue, but the queue type is not set to QUEUE_NONE. This appears to have caused a hang bug that has been lurking. 2) Fix bugs that brelse'ing locked buffers do not "free" them, but the code assumes so. This can cause hangs when LFS is used. 3) Use malloced memory for directories when applicable. The amount of malloced memory is seriously limited, but should decrease the amount of memory used by an average directory to 1/4 - 1/2 previous. This capability is fully tunable. (Note that there is no config parameter, and might never be.) 4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since the data in VMIO buffers is not lost when the buffer is reclaimed, this will help performance. This is adjustable also.
1996-03-02 04:40:56 +00:00
if ( (bufmallocspace < maxbufmallocspace) &&
(bp->b_bufsize == 0) &&
(mbsize <= PAGE_SIZE/2)) {
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
bp->b_data = malloc(mbsize, M_BIOBUF, M_WAITOK);
1) Fix a bug that a buffer is removed from a queue, but the queue type is not set to QUEUE_NONE. This appears to have caused a hang bug that has been lurking. 2) Fix bugs that brelse'ing locked buffers do not "free" them, but the code assumes so. This can cause hangs when LFS is used. 3) Use malloced memory for directories when applicable. The amount of malloced memory is seriously limited, but should decrease the amount of memory used by an average directory to 1/4 - 1/2 previous. This capability is fully tunable. (Note that there is no config parameter, and might never be.) 4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since the data in VMIO buffers is not lost when the buffer is reclaimed, this will help performance. This is adjustable also.
1996-03-02 04:40:56 +00:00
bp->b_bufsize = mbsize;
bp->b_bcount = size;
bp->b_flags |= B_MALLOC;
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
atomic_add_long(&bufmallocspace, mbsize);
1) Fix a bug that a buffer is removed from a queue, but the queue type is not set to QUEUE_NONE. This appears to have caused a hang bug that has been lurking. 2) Fix bugs that brelse'ing locked buffers do not "free" them, but the code assumes so. This can cause hangs when LFS is used. 3) Use malloced memory for directories when applicable. The amount of malloced memory is seriously limited, but should decrease the amount of memory used by an average directory to 1/4 - 1/2 previous. This capability is fully tunable. (Note that there is no config parameter, and might never be.) 4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since the data in VMIO buffers is not lost when the buffer is reclaimed, this will help performance. This is adjustable also.
1996-03-02 04:40:56 +00:00
return 1;
}
origbuf = NULL;
origbufsize = 0;
/*
Seventy-odd "its" / "it's" typos in comments fixed as per kern/6108.
1998-04-17 22:37:19 +00:00
* If the buffer is growing on its other-than-first allocation,
1) Fix a bug that a buffer is removed from a queue, but the queue type is not set to QUEUE_NONE. This appears to have caused a hang bug that has been lurking. 2) Fix bugs that brelse'ing locked buffers do not "free" them, but the code assumes so. This can cause hangs when LFS is used. 3) Use malloced memory for directories when applicable. The amount of malloced memory is seriously limited, but should decrease the amount of memory used by an average directory to 1/4 - 1/2 previous. This capability is fully tunable. (Note that there is no config parameter, and might never be.) 4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since the data in VMIO buffers is not lost when the buffer is reclaimed, this will help performance. This is adjustable also.
1996-03-02 04:40:56 +00:00
* then we revert to the page-allocation scheme.
*/
if (bp->b_flags & B_MALLOC) {
origbuf = bp->b_data;
origbufsize = bp->b_bufsize;
Implement a new totally dynamic (up to MAXPHYS) buffer kva allocation scheme. Additionally, add the capability for checking for unexpected kernel page faults. The maximum amount of kva space for buffers hasn't been decreased from where it is, but it will now be possible to do so. This scheme manages the kva space similar to the buffers themselves. If there isn't enough kva space because of usage or fragementation, buffers will be reclaimed until a buffer allocation is successful. This scheme should be very resistant to fragmentation problems until/if the LFS code is fixed and uses the bogus buffer locking scheme -- but a 'fixed' LFS is not likely to use such a scheme. Now there should be NO problem allocating buffers up to MAXPHYS.
1996-11-30 22:41:49 +00:00
bp->b_data = bp->b_kvabase;
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
if (bp->b_bufsize) {
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
atomic_subtract_long(&bufmallocspace,
- Lock down the buffer cache's infrastructure code. This includes locks on buf lists, synchronization variables, and atomic ops for the counters. This change does not remove giant from any code although some pushdown may be possible. - In vfs_bio_awrite() don't access buf fields without the buf lock.
2003-02-09 09:47:31 +00:00
bp->b_bufsize);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
bufspacewakeup();
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
bp->b_bufsize = 0;
}
1) Fix a bug that a buffer is removed from a queue, but the queue type is not set to QUEUE_NONE. This appears to have caused a hang bug that has been lurking. 2) Fix bugs that brelse'ing locked buffers do not "free" them, but the code assumes so. This can cause hangs when LFS is used. 3) Use malloced memory for directories when applicable. The amount of malloced memory is seriously limited, but should decrease the amount of memory used by an average directory to 1/4 - 1/2 previous. This capability is fully tunable. (Note that there is no config parameter, and might never be.) 4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since the data in VMIO buffers is not lost when the buffer is reclaimed, this will help performance. This is adjustable also.
1996-03-02 04:40:56 +00:00
bp->b_flags &= ~B_MALLOC;
newbsize = round_page(newbsize);
}
Fixed a variety of deadlock and panic bugs, removed the bypass code, and implemented the ability to limit bufferspace by memory consumed. (vfs_bio.c) Fixed recently introduced bugs that caused extra I/O to happen in some cases. (vfs_cluster.c) Submitted by: John Dyson
1995-01-24 10:00:46 +00:00
vm_hold_load_pages(
bp,
(vm_offset_t) bp->b_data + bp->b_bufsize,
(vm_offset_t) bp->b_data + newbsize);
1) Fix a bug that a buffer is removed from a queue, but the queue type is not set to QUEUE_NONE. This appears to have caused a hang bug that has been lurking. 2) Fix bugs that brelse'ing locked buffers do not "free" them, but the code assumes so. This can cause hangs when LFS is used. 3) Use malloced memory for directories when applicable. The amount of malloced memory is seriously limited, but should decrease the amount of memory used by an average directory to 1/4 - 1/2 previous. This capability is fully tunable. (Note that there is no config parameter, and might never be.) 4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since the data in VMIO buffers is not lost when the buffer is reclaimed, this will help performance. This is adjustable also.
1996-03-02 04:40:56 +00:00
if (origbuf) {
bcopy(origbuf, bp->b_data, origbufsize);
Add separate kmalloc classes for BIO buffers and Ktrace info.
1996-08-04 20:13:08 +00:00
free(origbuf, M_BIOBUF);
1) Fix a bug that a buffer is removed from a queue, but the queue type is not set to QUEUE_NONE. This appears to have caused a hang bug that has been lurking. 2) Fix bugs that brelse'ing locked buffers do not "free" them, but the code assumes so. This can cause hangs when LFS is used. 3) Use malloced memory for directories when applicable. The amount of malloced memory is seriously limited, but should decrease the amount of memory used by an average directory to 1/4 - 1/2 previous. This capability is fully tunable. (Note that there is no config parameter, and might never be.) 4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since the data in VMIO buffers is not lost when the buffer is reclaimed, this will help performance. This is adjustable also.
1996-03-02 04:40:56 +00:00
}
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
} else {
int desiredpages;
Changes to support 1Tb filesizes. Pages are now named by an (object,index) pair instead of (object,offset) pair.
1995-12-11 04:58:34 +00:00
newbsize = (size + DEV_BSIZE - 1) & ~(DEV_BSIZE - 1);
Correctly handle misaligned VMIO buffer (whose start or end offset in the VM object are not page aligned). This should fix the mount_msdos panic after a failed attemp to mount as ffs. Reviewed By: Matthew Dillon <dillon@apollo.backplane.com> Archie Cobbs <archie@whistle.com> Dmitrij Tejblum <dima@tejblum.dnttm.rssi.ru>
1998-12-22 14:43:58 +00:00
desiredpages = (size == 0) ? 0 :
num_pages((bp->b_offset & PAGE_MASK) + newbsize);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
1) Fix a bug that a buffer is removed from a queue, but the queue type is not set to QUEUE_NONE. This appears to have caused a hang bug that has been lurking. 2) Fix bugs that brelse'ing locked buffers do not "free" them, but the code assumes so. This can cause hangs when LFS is used. 3) Use malloced memory for directories when applicable. The amount of malloced memory is seriously limited, but should decrease the amount of memory used by an average directory to 1/4 - 1/2 previous. This capability is fully tunable. (Note that there is no config parameter, and might never be.) 4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since the data in VMIO buffers is not lost when the buffer is reclaimed, this will help performance. This is adjustable also.
1996-03-02 04:40:56 +00:00
if (bp->b_flags & B_MALLOC)
panic("allocbuf: VMIO buffer can't be malloced");
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* Set B_CACHE initially if buffer is 0 length or will become
* 0-length.
*/
if (size == 0 || bp->b_bufsize == 0)
bp->b_flags |= B_CACHE;
1) Fix a bug that a buffer is removed from a queue, but the queue type is not set to QUEUE_NONE. This appears to have caused a hang bug that has been lurking. 2) Fix bugs that brelse'ing locked buffers do not "free" them, but the code assumes so. This can cause hangs when LFS is used. 3) Use malloced memory for directories when applicable. The amount of malloced memory is seriously limited, but should decrease the amount of memory used by an average directory to 1/4 - 1/2 previous. This capability is fully tunable. (Note that there is no config parameter, and might never be.) 4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since the data in VMIO buffers is not lost when the buffer is reclaimed, this will help performance. This is adjustable also.
1996-03-02 04:40:56 +00:00
Fixed "bufspace" calculation. It was lossy in some circumstances of the buffer resizing and caused a "newbuf" deadlock. Reviewed by: John Dyson & David Greenman Submitted by: Peter Wemm
1995-07-17 06:26:07 +00:00
if (newbsize < bp->b_bufsize) {
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* DEV_BSIZE aligned new buffer size is less then the
* DEV_BSIZE aligned existing buffer size. Figure out
* if we have to remove any pages.
*/
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
if (desiredpages < bp->b_npages) {
Remove unused includes. Clarify the intention of a while(); Move a local variable to avoid potential name-confusion.
2002-09-28 17:46:30 +00:00
vm_page_t m;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if ((bp->b_flags & B_UNMAPPED) == 0) {
BUF_CHECK_MAPPED(bp);
pmap_qremove((vm_offset_t)trunc_page(
(vm_offset_t)bp->b_data) +
(desiredpages << PAGE_SHIFT),
(bp->b_npages - desiredpages));
} else
BUF_CHECK_UNMAPPED(bp);
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WLOCK(bp->b_bufobj->bo_object);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
for (i = desiredpages; i < bp->b_npages; i++) {
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
/*
* the page is not freed here -- it
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* is the responsibility of
* vnode_pager_setsize
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
*/
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
m = bp->b_pages[i];
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
KASSERT(m != bogus_page,
KNFize, by bde.
1999-01-10 01:58:29 +00:00
("allocbuf: bogus page found"));
The soft and hard busy mechanism rely on the vm object lock to work. Unify the 2 concept into a real, minimal, sxlock where the shared acquisition represent the soft busy and the exclusive acquisition represent the hard busy. The old VPO_WANTED mechanism becames the hard-path for this new lock and it becomes per-page rather than per-object. The vm_object lock becames an interlock for this functionality: it can be held in both read or write mode. However, if the vm_object lock is held in read mode while acquiring or releasing the busy state, the thread owner cannot make any assumption on the busy state unless it is also busying it. Also: - Add a new flag to directly shared busy pages while vm_page_alloc and vm_page_grab are being executed. This will be very helpful once these functions happen under a read object lock. - Move the swapping sleep into its own per-object flag The KPI is heavilly changed this is why the version is bumped. It is very likely that some VM ports users will need to change their own code. Sponsored by: EMC / Isilon storage division Discussed with: alc Reviewed by: jeff, kib Tested by: gavin, bapt (older version) Tested by: pho, scottl
2013-08-09 11:11:11 +00:00
while (vm_page_sleep_if_busy(m,
Acquire the page lock around vm_page_unwire() and vm_page_wire(). Reviewed by: kib
2010-05-03 16:41:11 +00:00
"biodep"))
continue;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
bp->b_pages[i] = NULL;
Acquire the page lock around vm_page_unwire() and vm_page_wire(). Reviewed by: kib
2010-05-03 16:41:11 +00:00
vm_page_lock(m);
Added a second argument, "activate" to the vm_page_unwire() call so that the caller can select either inactive or active queue to put the page on.
1998-10-28 13:37:02 +00:00
vm_page_unwire(m, 0);
Acquire the page lock around vm_page_unwire() and vm_page_wire(). Reviewed by: kib
2010-05-03 16:41:11 +00:00
vm_page_unlock(m);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WUNLOCK(bp->b_bufobj->bo_object);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
bp->b_npages = desiredpages;
}
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
} else if (size > bp->b_bcount) {
/*
* We are growing the buffer, possibly in a
* byte-granular fashion.
*/
vm_object_t obj;
vm_offset_t toff;
vm_offset_t tinc;
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* Step 1, bring in the VM pages from the object,
* allocating them if necessary. We must clear
* B_CACHE if these pages are not valid for the
* range covered by the buffer.
*/
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
Change buf->b_object to buf->b_bufobj->bo_object some whitespace fixes.
2004-11-04 09:06:54 +00:00
obj = bp->b_bufobj->bo_object;
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WLOCK(obj);
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
while (bp->b_npages < desiredpages) {
vm_page_t m;
/*
Add the ability for the allocflag argument of the vm_page_grab() to specify the increment of vm_pageout_deficit when sleeping due to page shortage. Then, in allocbuf(), the code to allocate pages when extending vmio buffer can be replaced by a call to vm_page_grab(). Suggested and reviewed by: alc MFC after: 2 weeks
2010-07-05 21:13:32 +00:00
* We must allocate system pages since blocking
Fix typo. MFC after: 1 week
2012-02-26 19:10:14 +00:00
* here could interfere with paging I/O, no
Add the ability for the allocflag argument of the vm_page_grab() to specify the increment of vm_pageout_deficit when sleeping due to page shortage. Then, in allocbuf(), the code to allocate pages when extending vmio buffer can be replaced by a call to vm_page_grab(). Suggested and reviewed by: alc MFC after: 2 weeks
2010-07-05 21:13:32 +00:00
* matter which process we are.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
The soft and hard busy mechanism rely on the vm object lock to work. Unify the 2 concept into a real, minimal, sxlock where the shared acquisition represent the soft busy and the exclusive acquisition represent the hard busy. The old VPO_WANTED mechanism becames the hard-path for this new lock and it becomes per-page rather than per-object. The vm_object lock becames an interlock for this functionality: it can be held in both read or write mode. However, if the vm_object lock is held in read mode while acquiring or releasing the busy state, the thread owner cannot make any assumption on the busy state unless it is also busying it. Also: - Add a new flag to directly shared busy pages while vm_page_alloc and vm_page_grab are being executed. This will be very helpful once these functions happen under a read object lock. - Move the swapping sleep into its own per-object flag The KPI is heavilly changed this is why the version is bumped. It is very likely that some VM ports users will need to change their own code. Sponsored by: EMC / Isilon storage division Discussed with: alc Reviewed by: jeff, kib Tested by: gavin, bapt (older version) Tested by: pho, scottl
2013-08-09 11:11:11 +00:00
* Only exclusive busy can be tested here.
* Blocking on shared busy might lead to
* deadlocks once allocbuf() is called after
* pages are vfs_busy_pages().
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*/
Add the ability for the allocflag argument of the vm_page_grab() to specify the increment of vm_pageout_deficit when sleeping due to page shortage. Then, in allocbuf(), the code to allocate pages when extending vmio buffer can be replaced by a call to vm_page_grab(). Suggested and reviewed by: alc MFC after: 2 weeks
2010-07-05 21:13:32 +00:00
m = vm_page_grab(obj, OFF_TO_IDX(bp->b_offset) +
bp->b_npages, VM_ALLOC_NOBUSY |
VM_ALLOC_SYSTEM | VM_ALLOC_WIRED |
Remove the deprecated VM_ALLOC_RETRY flag for the vm_page_grab(9). The flag was mandatory since r209792, where vm_page_grab(9) was changed to only support the alloc retry semantic. Suggested and reviewed by: alc Sponsored by: The FreeBSD Foundation
2013-08-22 07:39:53 +00:00
VM_ALLOC_IGN_SBUSY |
Add the ability for the allocflag argument of the vm_page_grab() to specify the increment of vm_pageout_deficit when sleeping due to page shortage. Then, in allocbuf(), the code to allocate pages when extending vmio buffer can be replaced by a call to vm_page_grab(). Suggested and reviewed by: alc MFC after: 2 weeks
2010-07-05 21:13:32 +00:00
VM_ALLOC_COUNT(desiredpages - bp->b_npages));
if (m->valid == 0)
bp->b_flags &= ~B_CACHE;
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
bp->b_pages[bp->b_npages] = m;
++bp->b_npages;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* Step 2. We've loaded the pages into the buffer,
* we have to figure out if we can still have B_CACHE
* set. Note that B_CACHE is set according to the
* byte-granular range ( bcount and size ), new the
* aligned range ( newbsize ).
*
* The VM test is against m->valid, which is DEV_BSIZE
* aligned. Needless to say, the validity of the data
* needs to also be DEV_BSIZE aligned. Note that this
* fails with NFS if the server or some other client
* extends the file's EOF. If our buffer is resized,
* B_CACHE may remain set! XXX
*/
toff = bp->b_bcount;
tinc = PAGE_SIZE - ((bp->b_offset + toff) & PAGE_MASK);
while ((bp->b_flags & B_CACHE) && toff < size) {
vm_pindex_t pi;
if (tinc > (size - toff))
tinc = size - toff;
pi = ((bp->b_offset & PAGE_MASK) + toff) >>
PAGE_SHIFT;
vfs_buf_test_cache(
bp,
bp->b_offset,
toff,
tinc,
bp->b_pages[pi]
);
toff += tinc;
tinc = PAGE_SIZE;
}
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WUNLOCK(obj);
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
* Step 3, fixup the KVM pmap.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*/
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if ((bp->b_flags & B_UNMAPPED) == 0)
bpmap_qenter(bp);
else
BUF_CHECK_UNMAPPED(bp);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
}
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
if (newbsize < bp->b_bufsize)
bufspacewakeup();
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
bp->b_bufsize = newbsize; /* actual buffer allocation */
bp->b_bcount = size; /* requested buffer size */
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
return 1;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
extern int inflight_transient_maps;
Oops, broke the build there. Uninline biodone() now that it is non-trivial. Introduce biowait() function. Currently there is a race condition and the mitigation is a timeout/retry. It is not obvious what kind of locking (if any) is suitable for BIO_DONE, since the majority of users take are of this themselves, and only a few places actually rely on the wakeup. Sponsored by: DARPA & NAI Labs.
2002-09-13 11:28:31 +00:00
void
biodone(struct bio *bp)
{
- Reduce contention on the global bdonelock and bpinlock by using a pool mutex to protect these sleep/wakeup/counter races. This still is preferable to bloating each bio with a mtx.
2008-03-21 10:00:05 +00:00
struct mtx *mtxp;
Close a race in biodone(), whereby the bio_done field of the passed bio may have been freed and reassigned by the wakeup before being tested after releasing the bdonelock. There's a non-zero chance this is the cause of a few of the crashes knocking around with biodone() sitting in the stack backtrace. Reviewed By: phk@
2005-09-29 10:37:20 +00:00
void (*done)(struct bio *);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
vm_offset_t start, end;
stylistic polishing.
2004-09-15 20:54:23 +00:00
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if ((bp->bio_flags & BIO_TRANSIENT_MAPPING) != 0) {
MFprojects/camlock r256619: Restore BIO_UNMAPPED and BIO_TRANSIENT_MAPPING in biodonne() when unmapping temporary mapped buffer. That fixes double unmap if biodone() called twice for the same BIO (but with different done methods). Move mapping removal before calling bio_done() method. I believe that it is very wrong to do anything to BIO after reporting completion. kib@ thinks it was done for some forgotten now case when bio_done() method needed mapped buffer. But 1) if BIO was sent as unmapped, then IMO done() should be called in the same way; 2) IMO there is no guatantee that buffer will be mapped at this point at all, for example, if all underlying stack supports unmapped I/O, so bio_done() handler can not expect that.
2013-10-21 06:44:55 +00:00
bp->bio_flags &= ~BIO_TRANSIENT_MAPPING;
bp->bio_flags |= BIO_UNMAPPED;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
start = trunc_page((vm_offset_t)bp->bio_data);
end = round_page((vm_offset_t)bp->bio_data + bp->bio_length);
MFprojects/camlock r256619: Restore BIO_UNMAPPED and BIO_TRANSIENT_MAPPING in biodonne() when unmapping temporary mapped buffer. That fixes double unmap if biodone() called twice for the same BIO (but with different done methods). Move mapping removal before calling bio_done() method. I believe that it is very wrong to do anything to BIO after reporting completion. kib@ thinks it was done for some forgotten now case when bio_done() method needed mapped buffer. But 1) if BIO was sent as unmapped, then IMO done() should be called in the same way; 2) IMO there is no guatantee that buffer will be mapped at this point at all, for example, if all underlying stack supports unmapped I/O, so bio_done() handler can not expect that.
2013-10-21 06:44:55 +00:00
pmap_qremove(start, OFF_TO_IDX(end - start));
vmem_free(transient_arena, start, end - start);
atomic_add_int(&inflight_transient_maps, -1);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
}
Close a race in biodone(), whereby the bio_done field of the passed bio may have been freed and reassigned by the wakeup before being tested after releasing the bdonelock. There's a non-zero chance this is the cause of a few of the crashes knocking around with biodone() sitting in the stack backtrace. Reviewed By: phk@
2005-09-29 10:37:20 +00:00
done = bp->bio_done;
MFprojects/camlock r256370: - Take BIO lock in biodone() only when there is no completion callback set and so we should wake up thread waiting in biowait(). - Remove msleep() timeout from biowait(). It was added 11 years ago, when there was no locks used, and it should not be needed any more.
2013-10-16 09:56:40 +00:00
if (done == NULL) {
mtxp = mtx_pool_find(mtxpool_sleep, bp);
mtx_lock(mtxp);
bp->bio_flags |= BIO_DONE;
- Add a lock for protecting against msleep(bp, ...) wakeup(bp) races. - Create a new function bdone() which sets B_DONE and calls wakup(bp). This is suitable for use as b_iodone for buf consumers who are not going through the buf cache. - Create a new function bwait() which waits for the buf to be done at a set priority and with a specific wmesg. - Replace several cases where the above functionality was implemented without locking with the new functions.
2003-03-13 07:31:45 +00:00
wakeup(bp);
MFprojects/camlock r256370: - Take BIO lock in biodone() only when there is no completion callback set and so we should wake up thread waiting in biowait(). - Remove msleep() timeout from biowait(). It was added 11 years ago, when there was no locks used, and it should not be needed any more.
2013-10-16 09:56:40 +00:00
mtx_unlock(mtxp);
} else {
bp->bio_flags |= BIO_DONE;
Close a race in biodone(), whereby the bio_done field of the passed bio may have been freed and reassigned by the wakeup before being tested after releasing the bdonelock. There's a non-zero chance this is the cause of a few of the crashes knocking around with biodone() sitting in the stack backtrace. Reviewed By: phk@
2005-09-29 10:37:20 +00:00
done(bp);
MFprojects/camlock r256370: - Take BIO lock in biodone() only when there is no completion callback set and so we should wake up thread waiting in biowait(). - Remove msleep() timeout from biowait(). It was added 11 years ago, when there was no locks used, and it should not be needed any more.
2013-10-16 09:56:40 +00:00
}
Oops, broke the build there. Uninline biodone() now that it is non-trivial. Introduce biowait() function. Currently there is a race condition and the mitigation is a timeout/retry. It is not obvious what kind of locking (if any) is suitable for BIO_DONE, since the majority of users take are of this themselves, and only a few places actually rely on the wakeup. Sponsored by: DARPA & NAI Labs.
2002-09-13 11:28:31 +00:00
}
/*
* Wait for a BIO to finish.
*/
int
biowait(struct bio *bp, const char *wchan)
{
- Reduce contention on the global bdonelock and bpinlock by using a pool mutex to protect these sleep/wakeup/counter races. This still is preferable to bloating each bio with a mtx.
2008-03-21 10:00:05 +00:00
struct mtx *mtxp;
Oops, broke the build there. Uninline biodone() now that it is non-trivial. Introduce biowait() function. Currently there is a race condition and the mitigation is a timeout/retry. It is not obvious what kind of locking (if any) is suitable for BIO_DONE, since the majority of users take are of this themselves, and only a few places actually rely on the wakeup. Sponsored by: DARPA & NAI Labs.
2002-09-13 11:28:31 +00:00
- Reduce contention on the global bdonelock and bpinlock by using a pool mutex to protect these sleep/wakeup/counter races. This still is preferable to bloating each bio with a mtx.
2008-03-21 10:00:05 +00:00
mtxp = mtx_pool_find(mtxpool_sleep, bp);
mtx_lock(mtxp);
Oops, broke the build there. Uninline biodone() now that it is non-trivial. Introduce biowait() function. Currently there is a race condition and the mitigation is a timeout/retry. It is not obvious what kind of locking (if any) is suitable for BIO_DONE, since the majority of users take are of this themselves, and only a few places actually rely on the wakeup. Sponsored by: DARPA & NAI Labs.
2002-09-13 11:28:31 +00:00
while ((bp->bio_flags & BIO_DONE) == 0)
MFprojects/camlock r256370: - Take BIO lock in biodone() only when there is no completion callback set and so we should wake up thread waiting in biowait(). - Remove msleep() timeout from biowait(). It was added 11 years ago, when there was no locks used, and it should not be needed any more.
2013-10-16 09:56:40 +00:00
msleep(bp, mtxp, PRIBIO, wchan, 0);
- Reduce contention on the global bdonelock and bpinlock by using a pool mutex to protect these sleep/wakeup/counter races. This still is preferable to bloating each bio with a mtx.
2008-03-21 10:00:05 +00:00
mtx_unlock(mtxp);
s/Danglish/English/ Some style issues. Change the timeout to be hz/10 instead of hz. Brucification by: bde.
2002-09-15 17:52:35 +00:00
if (bp->bio_error != 0)
Oops, broke the build there. Uninline biodone() now that it is non-trivial. Introduce biowait() function. Currently there is a race condition and the mitigation is a timeout/retry. It is not obvious what kind of locking (if any) is suitable for BIO_DONE, since the majority of users take are of this themselves, and only a few places actually rely on the wakeup. Sponsored by: DARPA & NAI Labs.
2002-09-13 11:28:31 +00:00
return (bp->bio_error);
Make biowait() check bio_error before the BIO_ERROR flag, to propery catch internal GEOM use of bio_error. Sponsored by: DARPA & NAI Labs.
2002-09-26 16:32:14 +00:00
if (!(bp->bio_flags & BIO_ERROR))
return (0);
Oops, broke the build there. Uninline biodone() now that it is non-trivial. Introduce biowait() function. Currently there is a race condition and the mitigation is a timeout/retry. It is not obvious what kind of locking (if any) is suitable for BIO_DONE, since the majority of users take are of this themselves, and only a few places actually rely on the wakeup. Sponsored by: DARPA & NAI Labs.
2002-09-13 11:28:31 +00:00
return (EIO);
}
Un-inline the non-trivial "trivial" bio* functions. Untangle devstat_end_transaction_bio()
2002-09-14 19:34:11 +00:00
void
biofinish(struct bio *bp, struct devstat *stat, int error)
{
if (error) {
bp->bio_error = error;
bp->bio_flags |= BIO_ERROR;
}
if (stat != NULL)
devstat_end_transaction_bio(stat, bp);
biodone(bp);
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/*
Hmm, diff/patch still doesn't like me. Missed one s/biowait/bufwait/g
2000-04-30 06:16:03 +00:00
* bufwait:
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* Wait for buffer I/O completion, returning error status. The buffer
Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup, especially in troff files.
2003-01-01 18:49:04 +00:00
* is left locked and B_DONE on return. B_EINTR is converted into an EINTR
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* error and cleared.
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
*/
int
stylistic polishing.
2004-09-15 20:54:23 +00:00
bufwait(struct buf *bp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
- Add a lock for protecting against msleep(bp, ...) wakeup(bp) races. - Create a new function bdone() which sets B_DONE and calls wakup(bp). This is suitable for use as b_iodone for buf consumers who are not going through the buf cache. - Create a new function bwait() which waits for the buf to be done at a set priority and with a specific wmesg. - Replace several cases where the above functionality was implemented without locking with the new functions.
2003-03-13 07:31:45 +00:00
if (bp->b_iocmd == BIO_READ)
bwait(bp, PRIBIO, "biord");
else
bwait(bp, PRIBIO, "biowr");
Changes from John Dyson and myself: Fixed remaining known bugs in the buffer IO and VM system. vfs_bio.c: Fixed some race conditions and locking bugs. Improved performance by removing some (now) unnecessary code and fixing some broken logic. Fixed process accounting of # of FS outputs. Properly handle NFS interrupts (B_EINTR). (various) Replaced calls to clrbuf() with calls to an optimized routine call vfs_bio_clrbuf(). (various FS sync) Sync out modified vnode_pager backed pages. ffs_vnops.c: Do two passes: Sync out file data first, then indirect blocks. vm_fault.c: Fixed deadly embrace caused by acquiring locks in the wrong order. vnode_pager.c: Changed to use buffer I/O system for writing out modified pages. This should fix the problem with the modification date previous not getting updated. Also dramatically simplifies the code. Note that this is going to change in the future and be implemented via VOP_PUTPAGES(). vm_object.c: Fixed a pile of bugs related to cleaning (vnode) objects. The performance of vm_object_page_clean() is terrible when dealing with huge objects, but this will change when we implement a binary tree to keep the object pages sorted. vm_pageout.c: Fixed broken clustering of pageouts. Fixed race conditions and other lockup style bugs in the scanning of pages. Improved performance.
1995-04-09 06:02:46 +00:00
if (bp->b_flags & B_EINTR) {
bp->b_flags &= ~B_EINTR;
return (EINTR);
}
Move B_ERROR flag to b_ioflags and call it BIO_ERROR. (Much of this done by script) Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED. Move b_pblkno and b_iodone_chain to struct bio while we transition, they will be obsoleted once bio structs chain/stack. Add bio_queue field for struct bio aware disksort. Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
if (bp->b_ioflags & BIO_ERROR) {
Changes from John Dyson and myself: Fixed remaining known bugs in the buffer IO and VM system. vfs_bio.c: Fixed some race conditions and locking bugs. Improved performance by removing some (now) unnecessary code and fixing some broken logic. Fixed process accounting of # of FS outputs. Properly handle NFS interrupts (B_EINTR). (various) Replaced calls to clrbuf() with calls to an optimized routine call vfs_bio_clrbuf(). (various FS sync) Sync out modified vnode_pager backed pages. ffs_vnops.c: Do two passes: Sync out file data first, then indirect blocks. vm_fault.c: Fixed deadly embrace caused by acquiring locks in the wrong order. vnode_pager.c: Changed to use buffer I/O system for writing out modified pages. This should fix the problem with the modification date previous not getting updated. Also dramatically simplifies the code. Note that this is going to change in the future and be implemented via VOP_PUTPAGES(). vm_object.c: Fixed a pile of bugs related to cleaning (vnode) objects. The performance of vm_object_page_clean() is terrible when dealing with huge objects, but this will change when we implement a binary tree to keep the object pages sorted. vm_pageout.c: Fixed broken clustering of pageouts. Fixed race conditions and other lockup style bugs in the scanning of pages. Improved performance.
1995-04-09 06:02:46 +00:00
return (bp->b_error ? bp->b_error : EIO);
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
} else {
return (0);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Give struct bio it's own call back mechanism.
2000-05-01 13:36:25 +00:00
/*
* Call back function from struct bio back up to struct buf.
*/
The size and contents of the DEV_STRATEGY() macro has progressed to the point where it being a macro is no longer sensible, and it will only be more so in days to come. BIO_STRATEGY() is now only used from DEV_STRATEGY() and should not be used directly anymore. Put the contents of both in the new function dev_strategy() and make DEV_STRATEGY() call that function. In addition, this allows us to make the rather magic bufdonebio() helper function static. This alse saves hunderedandsome bytes of code in a typical kernel.
2003-10-18 09:03:15 +00:00
static void
Give dev_strategy() an explict cdev argument in preparation for removing buf->b-dev. Put a bio between the buf passed to dev_strategy() and the device driver strategy routine in order to not clobber fields in the buf. Assert copyright on vfs_bio.c and update copyright message to canonical text. There is no legal difference between John Dysons two-clause abbreviated BSD license and the canonical text.
2004-10-29 07:16:37 +00:00
bufdonebio(struct bio *bip)
Give struct bio it's own call back mechanism.
2000-05-01 13:36:25 +00:00
{
Give dev_strategy() an explict cdev argument in preparation for removing buf->b-dev. Put a bio between the buf passed to dev_strategy() and the device driver strategy routine in order to not clobber fields in the buf. Assert copyright on vfs_bio.c and update copyright message to canonical text. There is no legal difference between John Dysons two-clause abbreviated BSD license and the canonical text.
2004-10-29 07:16:37 +00:00
struct buf *bp;
Grab Giant in bufdonebio() since drivers may not hold it. This only protects the "struct buf" consumers (ie: DEV_STRATEGY()), but does not protect BIO_STRATEGY() users.
2003-08-02 09:45:10 +00:00
Give dev_strategy() an explict cdev argument in preparation for removing buf->b-dev. Put a bio between the buf passed to dev_strategy() and the device driver strategy routine in order to not clobber fields in the buf. Assert copyright on vfs_bio.c and update copyright message to canonical text. There is no legal difference between John Dysons two-clause abbreviated BSD license and the canonical text.
2004-10-29 07:16:37 +00:00
bp = bip->bio_caller2;
Revert r259200. There are geoms/drivers which do not update bio_completed, only manage bio_resid, e.g. sa(4). Reported and tested by: Manfred Antar <null@pozo.com> Sponsored by: The FreeBSD Foundation MFC after: 1 week
2013-12-27 17:04:51 +00:00
bp->b_resid = bip->bio_resid;
Give dev_strategy() an explict cdev argument in preparation for removing buf->b-dev. Put a bio between the buf passed to dev_strategy() and the device driver strategy routine in order to not clobber fields in the buf. Assert copyright on vfs_bio.c and update copyright message to canonical text. There is no legal difference between John Dysons two-clause abbreviated BSD license and the canonical text.
2004-10-29 07:16:37 +00:00
bp->b_ioflags = bip->bio_flags;
bp->b_error = bip->bio_error;
if (bp->b_error)
bp->b_ioflags |= BIO_ERROR;
bufdone(bp);
g_destroy_bio(bip);
Give struct bio it's own call back mechanism.
2000-05-01 13:36:25 +00:00
}
The size and contents of the DEV_STRATEGY() macro has progressed to the point where it being a macro is no longer sensible, and it will only be more so in days to come. BIO_STRATEGY() is now only used from DEV_STRATEGY() and should not be used directly anymore. Put the contents of both in the new function dev_strategy() and make DEV_STRATEGY() call that function. In addition, this allows us to make the rather magic bufdonebio() helper function static. This alse saves hunderedandsome bytes of code in a typical kernel.
2003-10-18 09:03:15 +00:00
void
Give dev_strategy() an explict cdev argument in preparation for removing buf->b-dev. Put a bio between the buf passed to dev_strategy() and the device driver strategy routine in order to not clobber fields in the buf. Assert copyright on vfs_bio.c and update copyright message to canonical text. There is no legal difference between John Dysons two-clause abbreviated BSD license and the canonical text.
2004-10-29 07:16:37 +00:00
dev_strategy(struct cdev *dev, struct buf *bp)
The size and contents of the DEV_STRATEGY() macro has progressed to the point where it being a macro is no longer sensible, and it will only be more so in days to come. BIO_STRATEGY() is now only used from DEV_STRATEGY() and should not be used directly anymore. Put the contents of both in the new function dev_strategy() and make DEV_STRATEGY() call that function. In addition, this allows us to make the rather magic bufdonebio() helper function static. This alse saves hunderedandsome bytes of code in a typical kernel.
2003-10-18 09:03:15 +00:00
{
Device megapatch 6/6: This is what we came here for: Hang dev_t's from their cdevsw, refcount cdevsw and dev_t and generally keep track of things a lot better than we used to: Hold a cdevsw reference around all entrances into the device driver, this will be necessary to safely determine when we can unload driver code. Hold a dev_t reference while the device is open. KASSERT that we do not enter the driver on a non-referenced dev_t. Remove old D_NAG code, anonymous dev_t's are not a problem now. When destroy_dev() is called on a referenced dev_t, move it to dead_cdevsw's list. When the refcount drops, free it. Check that cdevsw->d_version is correct. If not, set all methods to the dead_*() methods to prevent entrance into driver. Print warning on console to this effect. The device driver may still explode if it is also incompatible with newbus, but in that case we probably didn't get this far in the first place.
2004-02-21 21:57:26 +00:00
struct cdevsw *csw;
Add new make_dev_p(9) flag MAKEDEV_ETERNAL to inform devfs that created cdev will never be destroyed. Propagate the flag to devfs vnodes as VV_ETERNVALDEV. Use the flags to avoid acquiring devmtx and taking a thread reference on such nodes. In collaboration with: pho MFC after: 1 month
2010-08-06 09:42:15 +00:00
int ref;
The size and contents of the DEV_STRATEGY() macro has progressed to the point where it being a macro is no longer sensible, and it will only be more so in days to come. BIO_STRATEGY() is now only used from DEV_STRATEGY() and should not be used directly anymore. Put the contents of both in the new function dev_strategy() and make DEV_STRATEGY() call that function. In addition, this allows us to make the rather magic bufdonebio() helper function static. This alse saves hunderedandsome bytes of code in a typical kernel.
2003-10-18 09:03:15 +00:00
Add dev_strategy_csw() function, which is similar to dev_strategy() but assumes that a thread reference was already obtained on the passed device. Use the function from physio(), to avoid two extra dev_mtx lock and unlock. Note that physio() is always used as the cdevsw method, or is called from a cdevsw method, and the caller already owns the reference. dev_strategy() is left to keep KPI intact, but now it is implemented as a wrapper around dev_strategy_csw(). Do some style cleanup in physio(). Requested and reviewed by: kan (previous version) Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2013-03-27 11:34:27 +00:00
KASSERT(dev->si_refcount > 0,
("dev_strategy on un-referenced struct cdev *(%s) %p",
devtoname(dev), dev));
csw = dev_refthread(dev, &ref);
dev_strategy_csw(dev, csw, bp);
dev_relthread(dev, ref);
}
void
dev_strategy_csw(struct cdev *dev, struct cdevsw *csw, struct buf *bp)
{
struct bio *bip;
KASSERT(bp->b_iocmd == BIO_READ || bp->b_iocmd == BIO_WRITE,
("b_iocmd botch"));
KASSERT(((dev->si_flags & SI_ETERNAL) != 0 && csw != NULL) ||
dev->si_threadcount > 0,
("dev_strategy_csw threadcount cdev *(%s) %p", devtoname(dev),
dev));
if (csw == NULL) {
bp->b_error = ENXIO;
bp->b_ioflags = BIO_ERROR;
bufdone(bp);
return;
}
Give dev_strategy() an explict cdev argument in preparation for removing buf->b-dev. Put a bio between the buf passed to dev_strategy() and the device driver strategy routine in order to not clobber fields in the buf. Assert copyright on vfs_bio.c and update copyright message to canonical text. There is no legal difference between John Dysons two-clause abbreviated BSD license and the canonical text.
2004-10-29 07:16:37 +00:00
for (;;) {
bip = g_new_bio();
if (bip != NULL)
break;
/* Try again later */
tsleep(&bp, PRIBIO, "dev_strat", hz/10);
}
bip->bio_cmd = bp->b_iocmd;
bip->bio_offset = bp->b_iooffset;
bip->bio_length = bp->b_bcount;
bip->bio_bcount = bp->b_bcount; /* XXX: remove */
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
bdata2bio(bp, bip);
Give dev_strategy() an explict cdev argument in preparation for removing buf->b-dev. Put a bio between the buf passed to dev_strategy() and the device driver strategy routine in order to not clobber fields in the buf. Assert copyright on vfs_bio.c and update copyright message to canonical text. There is no legal difference between John Dysons two-clause abbreviated BSD license and the canonical text.
2004-10-29 07:16:37 +00:00
bip->bio_done = bufdonebio;
bip->bio_caller2 = bp;
bip->bio_dev = dev;
(*csw->d_strategy)(bip);
The size and contents of the DEV_STRATEGY() macro has progressed to the point where it being a macro is no longer sensible, and it will only be more so in days to come. BIO_STRATEGY() is now only used from DEV_STRATEGY() and should not be used directly anymore. Put the contents of both in the new function dev_strategy() and make DEV_STRATEGY() call that function. In addition, this allows us to make the rather magic bufdonebio() helper function static. This alse saves hunderedandsome bytes of code in a typical kernel.
2003-10-18 09:03:15 +00:00
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/*
Give struct bio it's own call back mechanism.
2000-05-01 13:36:25 +00:00
* bufdone:
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* Finish I/O on a buffer, optionally calling a completion function.
* This is usually called from an interrupt so process blocking is
* not allowed.
*
* biodone is also responsible for setting B_CACHE in a B_VMIO bp.
* In a non-VMIO bp, B_CACHE will be set on the next getblk()
* assuming B_INVAL is clear.
*
* For the VMIO case, we set B_CACHE if the op was a read and no
* read error occured, or if the op was a write. B_CACHE is never
* set if the buffer is invalid or otherwise uncacheable.
*
* biodone does not mess with B_INVAL, allowing the I/O routine or the
* initiator to leave B_INVAL set to brelse the buffer out of existance
* in the biodone routine.
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
*/
Complete the bio/buf divorce for all code below devfs::strategy Exceptions: Vinum untouched. This means that it cannot be compiled. Greg Lehey is on the case. CCD not converted yet, casts to struct buf (still safe) atapi-cd casts to struct buf to examine B_PHYS
2000-04-15 05:54:02 +00:00
void
bufdone(struct buf *bp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
- Don't drop the wref on the bufobj until after bufdone() has completed. Without this, threads waiting in bufobj_wwait() may wakeup prior to bufdone() completing. Sponsored by: Isilon Systems, Inc.
2005-01-28 17:48:58 +00:00
struct bufobj *dropobj;
Remove __P.
2002-03-19 21:25:46 +00:00
void (*biodone)(struct buf *);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
- Add CTR calls to trace the lifecycle of a buffer. - Remove some KASSERTs which are invalid if the appropriate lock is not held. - Slightly restructure bremfree() so that it is more sane. - Change the flush code in bdwrite() to avoid acquiring a mutex whenever possible. - Change the flush code in bdwrite() to avoid holding the bufobj mutex while calling buf_countdeps(). This introduces a lock-order relationship with the softdep lock that can not otherwise be resolved. - Don't set B_DONE until bufdone() is complete, otherwise another processor may believe the buf is done before it is. - Only acquire Giant if the caller has set b_iodone. Don't grab giant around normal bufdone() calls. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:47:04 +00:00
CTR3(KTR_BUF, "bufdone(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
- Don't drop the wref on the bufobj until after bufdone() has completed. Without this, threads waiting in bufobj_wwait() may wakeup prior to bufdone() completing. Sponsored by: Isilon Systems, Inc.
2005-01-28 17:48:58 +00:00
dropobj = NULL;
Fix a problem with the VN device. Specifically, the VN device can cause a problem of spiraling death due to buffer resource limitations. The vfs_bio code in general had little ability to handle buffer resource management, and now it does. Also, there are a lot more knobs for tuning the vfs_bio code now. The knobs came free because of the need that there always be some immediately available buffers (non-delayed or locked) for use. Note that the buffer cache code is much less likely to get bogged down with lots of delayed writes, even more so than before.
1997-06-15 17:56:53 +00:00
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
KASSERT(!(bp->b_flags & B_DONE), ("biodone: bp %p already done", bp));
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
Fixed broken offset use in vfs_unbusy_pages() which resulted in several different types of panics/inconsistencies with NFS clients. Cleared PG_WANTED where appropriate. Added checks for buffer busy in allocbuf and biodone. Reviewed by: John Dyson
1995-07-25 05:03:06 +00:00
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
runningbufwakeup(bp);
- Don't drop the wref on the bufobj until after bufdone() has completed. Without this, threads waiting in bufobj_wwait() may wakeup prior to bufdone() completing. Sponsored by: Isilon Systems, Inc.
2005-01-28 17:48:58 +00:00
if (bp->b_iocmd == BIO_WRITE)
dropobj = bp->b_bufobj;
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
/* call optional completion function if requested */
Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new field in struct buf: b_iocmd. The b_iocmd is enforced to have exactly one bit set. B_WRITE was bogusly defined as zero giving rise to obvious coding mistakes. Also eliminate the redundant struct buf flag B_CALL, it can just as efficiently be done by comparing b_iodone to NULL. Should you get a panic or drop into the debugger, complaining about "b_iocmd", don't continue. It is likely to write on your disk where it should have been reading. This change is a step in the direction towards a stackable BIO capability. A lot of this patch were machine generated (Thanks to style(9) compliance!) Vinum users: Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
if (bp->b_iodone != NULL) {
Draw the outline of "struct bio". Struct bio is the future carrier of I/O requests for "struct buf".
2000-04-02 09:26:51 +00:00
biodone = bp->b_iodone;
Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new field in struct buf: b_iocmd. The b_iocmd is enforced to have exactly one bit set. B_WRITE was bogusly defined as zero giving rise to obvious coding mistakes. Also eliminate the redundant struct buf flag B_CALL, it can just as efficiently be done by comparing b_iodone to NULL. Should you get a panic or drop into the debugger, complaining about "b_iocmd", don't continue. It is likely to write on your disk where it should have been reading. This change is a step in the direction towards a stackable BIO capability. A lot of this patch were machine generated (Thanks to style(9) compliance!) Vinum users: Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
bp->b_iodone = NULL;
Draw the outline of "struct bio". Struct bio is the future carrier of I/O requests for "struct buf".
2000-04-02 09:26:51 +00:00
(*biodone) (bp);
- Don't drop the wref on the bufobj until after bufdone() has completed. Without this, threads waiting in bufobj_wwait() may wakeup prior to bufdone() completing. Sponsored by: Isilon Systems, Inc.
2005-01-28 17:48:58 +00:00
if (dropobj)
bufobj_wdrop(dropobj);
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
return;
}
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
bufdone_finish(bp);
if (dropobj)
bufobj_wdrop(dropobj);
}
void
bufdone_finish(struct buf *bp)
{
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
Use LIST_EMPTY() instead of unrolled version (LIST_FIRST() [!=]= NULL)
2007-02-22 14:52:59 +00:00
if (!LIST_EMPTY(&bp->b_dep))
Virtualizes & untangles the bioops operations vector. Ref: Message-ID: <18317.961014572@critter.freebsd.dk> To: current@
2000-06-16 08:48:51 +00:00
buf_complete(bp);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
if (bp->b_flags & B_VMIO) {
The previous fix didn't work properly for small block size filesystems, which caused very slow file access for cd9660 and some ext2fs filesystems. Reviewed by: bde
1997-05-30 22:25:35 +00:00
vm_ooffset_t foff;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
vm_page_t m;
vm_object_t obj;
Retire VFS_BIO_DEBUG. Convert those checks that were still valid into KASSERT()s and eliminate the rest. Replace excessive printf()s and a panic() in bufdone_finish() with a KASSERT() in vm_page_io_finish(). Reviewed by: kib
2011-02-12 01:00:00 +00:00
struct vnode *vp;
int bogus, i, iosize;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
Change buf->b_object to buf->b_bufobj->bo_object some whitespace fixes.
2004-11-04 09:06:54 +00:00
obj = bp->b_bufobj->bo_object;
Retire VFS_BIO_DEBUG. Convert those checks that were still valid into KASSERT()s and eliminate the rest. Replace excessive printf()s and a panic() in bufdone_finish() with a KASSERT() in vm_page_io_finish(). Reviewed by: kib
2011-02-12 01:00:00 +00:00
KASSERT(obj->paging_in_progress >= bp->b_npages,
("biodone_finish: paging in progress(%d) < b_npages(%d)",
obj->paging_in_progress, bp->b_npages));
Re-institute a bugfix in allocation of anonymous buffer memory.
1997-09-21 04:49:30 +00:00
Retire VFS_BIO_DEBUG. Convert those checks that were still valid into KASSERT()s and eliminate the rest. Replace excessive printf()s and a panic() in bufdone_finish() with a KASSERT() in vm_page_io_finish(). Reviewed by: kib
2011-02-12 01:00:00 +00:00
vp = bp->b_vp;
KASSERT(vp->v_holdcnt > 0,
("biodone_finish: vnode %p has zero hold count", vp));
Don't use VOP_GETVOBJECT, use vp->v_object directly.
2005-01-25 00:40:01 +00:00
KASSERT(vp->v_object != NULL,
Retire VFS_BIO_DEBUG. Convert those checks that were still valid into KASSERT()s and eliminate the rest. Replace excessive printf()s and a panic() in bufdone_finish() with a KASSERT() in vm_page_io_finish(). Reviewed by: kib
2011-02-12 01:00:00 +00:00
("biodone_finish: vnode %p has no vm_object", vp));
Re-institute a bugfix in allocation of anonymous buffer memory.
1997-09-21 04:49:30 +00:00
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
foff = bp->b_offset;
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
KASSERT(bp->b_offset != NOOFFSET,
Retire VFS_BIO_DEBUG. Convert those checks that were still valid into KASSERT()s and eliminate the rest. Replace excessive printf()s and a panic() in bufdone_finish() with a KASSERT() in vm_page_io_finish(). Reviewed by: kib
2011-02-12 01:00:00 +00:00
("biodone_finish: bp %p has no buffer offset", bp));
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* Set B_CACHE if the op was a normal read and no error
* occured. B_CACHE is set for writes in the b*write()
* routines.
*/
Adjust the buffer cache to better handle small-memory machines. A slightly older version of this code was tested by BDE and I. Also fixes a lockup situation when kva gets too fragmented. Remove the maxvmiobufspace variable and sysctl, they are no longer used. Also cleanup (remove) #if 0 sections from prior commits. This code is more of a hack, but presumably the whole buffer cache implementation is going to be rewritten in the next year so it's no big deal.
1999-10-24 03:27:28 +00:00
iosize = bp->b_bcount - bp->b_resid;
Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new field in struct buf: b_iocmd. The b_iocmd is enforced to have exactly one bit set. B_WRITE was bogusly defined as zero giving rise to obvious coding mistakes. Also eliminate the redundant struct buf flag B_CALL, it can just as efficiently be done by comparing b_iodone to NULL. Should you get a panic or drop into the debugger, complaining about "b_iocmd", don't continue. It is likely to write on your disk where it should have been reading. This change is a step in the direction towards a stackable BIO capability. A lot of this patch were machine generated (Thanks to style(9) compliance!) Vinum users: Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
if (bp->b_iocmd == BIO_READ &&
Move B_ERROR flag to b_ioflags and call it BIO_ERROR. (Much of this done by script) Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED. Move b_pblkno and b_iodone_chain to struct bio while we transition, they will be obsoleted once bio structs chain/stack. Add bio_queue field for struct bio aware disksort. Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
!(bp->b_flags & (B_INVAL|B_NOCACHE)) &&
!(bp->b_ioflags & BIO_ERROR)) {
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
bp->b_flags |= B_CACHE;
}
Improve bufdone_finish()'s handling of the bogus page. Specifically, if one or more mappings to the bogus page must be replaced, call pmap_qenter() just once. Previously, pmap_qenter() was called for each mapping to the bogus page. MFC after: 3 weeks
2010-06-30 04:52:42 +00:00
bogus = 0;
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WLOCK(obj);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
for (i = 0; i < bp->b_npages; i++) {
Changes from John Dyson and myself: Fixed remaining known bugs in the buffer IO and VM system. vfs_bio.c: Fixed some race conditions and locking bugs. Improved performance by removing some (now) unnecessary code and fixing some broken logic. Fixed process accounting of # of FS outputs. Properly handle NFS interrupts (B_EINTR). (various) Replaced calls to clrbuf() with calls to an optimized routine call vfs_bio_clrbuf(). (various FS sync) Sync out modified vnode_pager backed pages. ffs_vnops.c: Do two passes: Sync out file data first, then indirect blocks. vm_fault.c: Fixed deadly embrace caused by acquiring locks in the wrong order. vnode_pager.c: Changed to use buffer I/O system for writing out modified pages. This should fix the problem with the modification date previous not getting updated. Also dramatically simplifies the code. Note that this is going to change in the future and be implemented via VOP_PUTPAGES(). vm_object.c: Fixed a pile of bugs related to cleaning (vnode) objects. The performance of vm_object_page_clean() is terrible when dealing with huge objects, but this will change when we implement a binary tree to keep the object pages sorted. vm_pageout.c: Fixed broken clustering of pageouts. Fixed race conditions and other lockup style bugs in the scanning of pages. Improved performance.
1995-04-09 06:02:46 +00:00
int bogusflag = 0;
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
int resid;
resid = ((foff + PAGE_SIZE) & ~(off_t)PAGE_MASK) - foff;
if (resid > iosize)
resid = iosize;
/*
* cleanup bogus pages, restoring the originals
*/
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
m = bp->b_pages[i];
if (m == bogus_page) {
Improve bufdone_finish()'s handling of the bogus page. Specifically, if one or more mappings to the bogus page must be replaced, call pmap_qenter() just once. Previously, pmap_qenter() was called for each mapping to the bogus page. MFC after: 3 weeks
2010-06-30 04:52:42 +00:00
bogus = bogusflag = 1;
Changes to support 1Tb filesizes. Pages are now named by an (object,index) pair instead of (object,offset) pair.
1995-12-11 04:58:34 +00:00
m = vm_page_lookup(obj, OFF_TO_IDX(foff));
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
if (m == NULL)
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
panic("biodone: page disappeared!");
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
bp->b_pages[i] = m;
}
Retire VFS_BIO_DEBUG. Convert those checks that were still valid into KASSERT()s and eliminate the rest. Replace excessive printf()s and a panic() in bufdone_finish() with a KASSERT() in vm_page_io_finish(). Reviewed by: kib
2011-02-12 01:00:00 +00:00
KASSERT(OFF_TO_IDX(foff) == m->pindex,
("biodone_finish: foff(%jd)/pindex(%ju) mismatch",
(intmax_t)foff, (uintmax_t)m->pindex));
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
/*
* In the write case, the valid and clean bits are
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* already changed correctly ( see bdwrite() ), so we
* only need to do this here in the read case.
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
*/
Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new field in struct buf: b_iocmd. The b_iocmd is enforced to have exactly one bit set. B_WRITE was bogusly defined as zero giving rise to obvious coding mistakes. Also eliminate the redundant struct buf flag B_CALL, it can just as efficiently be done by comparing b_iodone to NULL. Should you get a panic or drop into the debugger, complaining about "b_iocmd", don't continue. It is likely to write on your disk where it should have been reading. This change is a step in the direction towards a stackable BIO capability. A lot of this patch were machine generated (Thanks to style(9) compliance!) Vinum users: Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
if ((bp->b_iocmd == BIO_READ) && !bogusflag && resid > 0) {
Eliminate page queues locking from bufdone_finish() through the following changes: Rename vfs_page_set_valid() to vfs_page_set_validclean() to reflect what this function actually does. Suggested by: tegge Introduce a new version of vfs_page_set_valid() that does no more than what the function's name implies. Specifically, it does not update the page's dirty mask, and thus it does not require the page queues lock to be held. Update two of the three callers to the old vfs_page_set_valid() to call vfs_page_set_validclean() instead because they actually require the page's dirty mask to be cleared. Introduce vm_page_set_valid(). Reviewed by: tegge
2009-05-13 05:39:39 +00:00
KASSERT((m->dirty & vm_page_bits(foff &
PAGE_MASK, resid)) == 0, ("bufdone_finish:"
" page %p has unexpected dirty bits", m));
Eliminate vfs_page_set_valid()'s unused argument.
2007-12-02 01:28:35 +00:00
vfs_page_set_valid(bp, foff, m);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
Only do object paging_in_progress wakeups if someone is waiting on this condition. Added some comments. Submitted by: John Dyson
1995-02-22 09:16:07 +00:00
The soft and hard busy mechanism rely on the vm object lock to work. Unify the 2 concept into a real, minimal, sxlock where the shared acquisition represent the soft busy and the exclusive acquisition represent the hard busy. The old VPO_WANTED mechanism becames the hard-path for this new lock and it becomes per-page rather than per-object. The vm_object lock becames an interlock for this functionality: it can be held in both read or write mode. However, if the vm_object lock is held in read mode while acquiring or releasing the busy state, the thread owner cannot make any assumption on the busy state unless it is also busying it. Also: - Add a new flag to directly shared busy pages while vm_page_alloc and vm_page_grab are being executed. This will be very helpful once these functions happen under a read object lock. - Move the swapping sleep into its own per-object flag The KPI is heavilly changed this is why the version is bumped. It is very likely that some VM ports users will need to change their own code. Sponsored by: EMC / Isilon storage division Discussed with: alc Reviewed by: jeff, kib Tested by: gavin, bapt (older version) Tested by: pho, scottl
2013-08-09 11:11:11 +00:00
vm_page_sunbusy(m);
Change various syscalls to use size_t arguments instead of u_int. Add some overflow checks to read/write (from bde). Change all modifications to vm_page::flags, vm_page::busy, vm_object::flags and vm_object::paging_in_progress to use operations which are not interruptable. Reviewed by: Bruce Evans <bde@zeta.org.au>
1998-08-24 08:39:39 +00:00
vm_object_pip_subtract(obj, 1);
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
foff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
iosize -= resid;
}
- Revision 1.469 of vfs_subr.c resulted in the buf's b_object field being consistency initialized. Consequently, a number of conditionals that checked the validity of b_object before passing it to VM_OBJECT_LOCK() and VM_OBJECT_UNLOCK() are no longer needed.
2003-11-11 04:45:37 +00:00
vm_object_pip_wakeupn(obj, 0);
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WUNLOCK(obj);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if (bogus && (bp->b_flags & B_UNMAPPED) == 0) {
BUF_CHECK_MAPPED(bp);
Improve bufdone_finish()'s handling of the bogus page. Specifically, if one or more mappings to the bogus page must be replaced, call pmap_qenter() just once. Previously, pmap_qenter() was called for each mapping to the bogus page. MFC after: 3 weeks
2010-06-30 04:52:42 +00:00
pmap_qenter(trunc_page((vm_offset_t)bp->b_data),
bp->b_pages, bp->b_npages);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
}
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
/*
* For asynchronous completions, release the buffer now. The brelse
Convert buffer locking from using the B_BUSY and B_WANTED flags to using lockmgr locks. This commit should be functionally equivalent to the old semantics. That is, all buffer locking is done with LK_EXCLUSIVE requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will be done in future commits.
1999-06-26 02:47:16 +00:00
* will do a wakeup there if necessary - so no need to do a wakeup
* here in the async case. The sync case always needs to do a wakeup.
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
if (bp->b_flags & B_ASYNC) {
Move B_ERROR flag to b_ioflags and call it BIO_ERROR. (Much of this done by script) Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED. Move b_pblkno and b_iodone_chain to struct bio while we transition, they will be obsoleted once bio structs chain/stack. Add bio_queue field for struct bio aware disksort. Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
if ((bp->b_flags & (B_NOCACHE | B_INVAL | B_RELBUF)) || (bp->b_ioflags & BIO_ERROR))
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
brelse(bp);
else
bqrelse(bp);
- Don't drop the wref on the bufobj until after bufdone() has completed. Without this, threads waiting in bufobj_wwait() may wakeup prior to bufdone() completing. Sponsored by: Isilon Systems, Inc.
2005-01-28 17:48:58 +00:00
} else
- Add a lock for protecting against msleep(bp, ...) wakeup(bp) races. - Create a new function bdone() which sets B_DONE and calls wakup(bp). This is suitable for use as b_iodone for buf consumers who are not going through the buf cache. - Create a new function bwait() which waits for the buf to be done at a set priority and with a specific wmesg. - Replace several cases where the above functionality was implemented without locking with the new functions.
2003-03-13 07:31:45 +00:00
bdone(bp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Only do object paging_in_progress wakeups if someone is waiting on this condition. Added some comments. Submitted by: John Dyson
1995-02-22 09:16:07 +00:00
/*
* This routine is called in lieu of iodone in the case of
* incomplete I/O. This keeps the busy status for pages
* consistant.
*/
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
void
stylistic polishing.
2004-09-15 20:54:23 +00:00
vfs_unbusy_pages(struct buf *bp)
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
{
Nitpicking and dusting performed on a train. Removes trivial warnings about unused variables, labels and other lint.
1998-10-25 17:44:59 +00:00
int i;
undent some functions a bit.
2004-09-15 21:08:58 +00:00
vm_object_t obj;
vm_page_t m;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
This implements a better launder limiting solution. There was a solution in 4.2-REL which I ripped out in -stable and -current when implementing the low-memory handling solution. However, maxlaunder turns out to be the saving grace in certain very heavily loaded systems (e.g. newsreader box). The new algorithm limits the number of pages laundered in the first pageout daemon pass. If that is not sufficient then suceessive will be run without any limit. Write I/O is now pipelined using two sysctls, vfs.lorunningspace and vfs.hirunningspace. This prevents excessive buffered writes in the disk queues which cause long (multi-second) delays for reads. It leads to more stable (less jerky) and generally faster I/O streaming to disk by allowing required read ops (e.g. for indirect blocks and such) to occur without interrupting the write stream, amoung other things. NOTE: eventually, filesystem write I/O pipelining needs to be done on a per-device basis. At the moment it is globalized.
2000-12-26 19:41:38 +00:00
runningbufwakeup(bp);
undent some functions a bit.
2004-09-15 21:08:58 +00:00
if (!(bp->b_flags & B_VMIO))
return;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
Change buf->b_object to buf->b_bufobj->bo_object some whitespace fixes.
2004-11-04 09:06:54 +00:00
obj = bp->b_bufobj->bo_object;
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WLOCK(obj);
undent some functions a bit.
2004-09-15 21:08:58 +00:00
for (i = 0; i < bp->b_npages; i++) {
m = bp->b_pages[i];
if (m == bogus_page) {
m = vm_page_lookup(obj, OFF_TO_IDX(bp->b_offset) + i);
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
if (!m)
undent some functions a bit.
2004-09-15 21:08:58 +00:00
panic("vfs_unbusy_pages: page missing\n");
bp->b_pages[i] = m;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if ((bp->b_flags & B_UNMAPPED) == 0) {
BUF_CHECK_MAPPED(bp);
pmap_qenter(trunc_page((vm_offset_t)bp->b_data),
bp->b_pages, bp->b_npages);
} else
BUF_CHECK_UNMAPPED(bp);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
undent some functions a bit.
2004-09-15 21:08:58 +00:00
vm_object_pip_subtract(obj, 1);
The soft and hard busy mechanism rely on the vm object lock to work. Unify the 2 concept into a real, minimal, sxlock where the shared acquisition represent the soft busy and the exclusive acquisition represent the hard busy. The old VPO_WANTED mechanism becames the hard-path for this new lock and it becomes per-page rather than per-object. The vm_object lock becames an interlock for this functionality: it can be held in both read or write mode. However, if the vm_object lock is held in read mode while acquiring or releasing the busy state, the thread owner cannot make any assumption on the busy state unless it is also busying it. Also: - Add a new flag to directly shared busy pages while vm_page_alloc and vm_page_grab are being executed. This will be very helpful once these functions happen under a read object lock. - Move the swapping sleep into its own per-object flag The KPI is heavilly changed this is why the version is bumped. It is very likely that some VM ports users will need to change their own code. Sponsored by: EMC / Isilon storage division Discussed with: alc Reviewed by: jeff, kib Tested by: gavin, bapt (older version) Tested by: pho, scottl
2013-08-09 11:11:11 +00:00
vm_page_sunbusy(m);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
undent some functions a bit.
2004-09-15 21:08:58 +00:00
vm_object_pip_wakeupn(obj, 0);
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WUNLOCK(obj);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
Fix a few bugs with NFS and mmap caused by NFS' use of b_validoff and b_validend. The changes to vfs_bio.c are a bit ugly but hopefully can be tidied up later by a slight redesign. PR: kern/2573, kern/2754, kern/3046 (possibly) Reviewed by: dyson
1997-05-19 14:36:56 +00:00
/*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* vfs_page_set_valid:
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* Set the valid bits in a page based on the supplied offset. The
* range is restricted to the buffer's size.
*
* This routine is typically called after a read completes.
Fix a few bugs with NFS and mmap caused by NFS' use of b_validoff and b_validend. The changes to vfs_bio.c are a bit ugly but hopefully can be tidied up later by a slight redesign. PR: kern/2573, kern/2754, kern/3046 (possibly) Reviewed by: dyson
1997-05-19 14:36:56 +00:00
*/
static void
Eliminate vfs_page_set_valid()'s unused argument.
2007-12-02 01:28:35 +00:00
vfs_page_set_valid(struct buf *bp, vm_ooffset_t off, vm_page_t m)
Eliminate page queues locking from bufdone_finish() through the following changes: Rename vfs_page_set_valid() to vfs_page_set_validclean() to reflect what this function actually does. Suggested by: tegge Introduce a new version of vfs_page_set_valid() that does no more than what the function's name implies. Specifically, it does not update the page's dirty mask, and thus it does not require the page queues lock to be held. Update two of the three callers to the old vfs_page_set_valid() to call vfs_page_set_validclean() instead because they actually require the page's dirty mask to be cleared. Introduce vm_page_set_valid(). Reviewed by: tegge
2009-05-13 05:39:39 +00:00
{
vm_ooffset_t eoff;
/*
* Compute the end offset, eoff, such that [off, eoff) does not span a
* page boundary and eoff is not greater than the end of the buffer.
* The end of the buffer, in this case, is our file EOF, not the
* allocation size of the buffer.
*/
eoff = (off + PAGE_SIZE) & ~(vm_ooffset_t)PAGE_MASK;
if (eoff > bp->b_offset + bp->b_bcount)
eoff = bp->b_offset + bp->b_bcount;
/*
* Set valid range. This is typically the entire buffer and thus the
* entire page.
*/
if (eoff > off)
Rename vm_page_set_valid() to vm_page_set_valid_range(). The vm_page_set_valid() is the most reasonable name for the m->valid accessor. Reviewed by: attilio, alc
2011-11-30 17:39:00 +00:00
vm_page_set_valid_range(m, off & PAGE_MASK, eoff - off);
Eliminate page queues locking from bufdone_finish() through the following changes: Rename vfs_page_set_valid() to vfs_page_set_validclean() to reflect what this function actually does. Suggested by: tegge Introduce a new version of vfs_page_set_valid() that does no more than what the function's name implies. Specifically, it does not update the page's dirty mask, and thus it does not require the page queues lock to be held. Update two of the three callers to the old vfs_page_set_valid() to call vfs_page_set_validclean() instead because they actually require the page's dirty mask to be cleared. Introduce vm_page_set_valid(). Reviewed by: tegge
2009-05-13 05:39:39 +00:00
}
/*
* vfs_page_set_validclean:
*
* Set the valid bits and clear the dirty bits in a page based on the
* supplied offset. The range is restricted to the buffer's size.
*/
static void
vfs_page_set_validclean(struct buf *bp, vm_ooffset_t off, vm_page_t m)
Fix a few bugs with NFS and mmap caused by NFS' use of b_validoff and b_validend. The changes to vfs_bio.c are a bit ugly but hopefully can be tidied up later by a slight redesign. PR: kern/2573, kern/2754, kern/3046 (possibly) Reviewed by: dyson
1997-05-19 14:36:56 +00:00
{
The previous fix didn't work properly for small block size filesystems, which caused very slow file access for cd9660 and some ext2fs filesystems. Reviewed by: bde
1997-05-30 22:25:35 +00:00
vm_ooffset_t soff, eoff;
Fix a few bugs with NFS and mmap caused by NFS' use of b_validoff and b_validend. The changes to vfs_bio.c are a bit ugly but hopefully can be tidied up later by a slight redesign. PR: kern/2573, kern/2754, kern/3046 (possibly) Reviewed by: dyson
1997-05-19 14:36:56 +00:00
Catch a case spotted by Tor where files mmapped could leave garbage in the unallocated parts of the last page when the file ended on a frag but not a page boundary. Delimitted by tags PRE_MATT_MMAP_EOF and POST_MATT_MMAP_EOF, in files alpha/alpha/pmap.c i386/i386/pmap.c nfs/nfs_bio.c vm/pmap.h vm/vm_page.c vm/vm_page.h vm/vnode_pager.c miscfs/specfs/spec_vnops.c ufs/ufs/ufs_readwrite.c kern/vfs_bio.c Submitted by: Matt Dillon <dillon@freebsd.org> Reviewed by: Alan Cox <alc@freebsd.org>
1999-04-05 19:38:30 +00:00
/*
* Start and end offsets in buffer. eoff - soff may not cross a
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* page boundry or cross the end of the buffer. The end of the
* buffer, in this case, is our file EOF, not the allocation size
* of the buffer.
Catch a case spotted by Tor where files mmapped could leave garbage in the unallocated parts of the last page when the file ended on a frag but not a page boundary. Delimitted by tags PRE_MATT_MMAP_EOF and POST_MATT_MMAP_EOF, in files alpha/alpha/pmap.c i386/i386/pmap.c nfs/nfs_bio.c vm/pmap.h vm/vm_page.c vm/vm_page.h vm/vnode_pager.c miscfs/specfs/spec_vnops.c ufs/ufs/ufs_readwrite.c kern/vfs_bio.c Submitted by: Matt Dillon <dillon@freebsd.org> Reviewed by: Alan Cox <alc@freebsd.org>
1999-04-05 19:38:30 +00:00
*/
Fix a few bugs with NFS and mmap caused by NFS' use of b_validoff and b_validend. The changes to vfs_bio.c are a bit ugly but hopefully can be tidied up later by a slight redesign. PR: kern/2573, kern/2754, kern/3046 (possibly) Reviewed by: dyson
1997-05-19 14:36:56 +00:00
soff = off;
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
eoff = (off + PAGE_SIZE) & ~(off_t)PAGE_MASK;
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
if (eoff > bp->b_offset + bp->b_bcount)
eoff = bp->b_offset + bp->b_bcount;
Catch a case spotted by Tor where files mmapped could leave garbage in the unallocated parts of the last page when the file ended on a frag but not a page boundary. Delimitted by tags PRE_MATT_MMAP_EOF and POST_MATT_MMAP_EOF, in files alpha/alpha/pmap.c i386/i386/pmap.c nfs/nfs_bio.c vm/pmap.h vm/vm_page.c vm/vm_page.h vm/vnode_pager.c miscfs/specfs/spec_vnops.c ufs/ufs/ufs_readwrite.c kern/vfs_bio.c Submitted by: Matt Dillon <dillon@freebsd.org> Reviewed by: Alan Cox <alc@freebsd.org>
1999-04-05 19:38:30 +00:00
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* Set valid range. This is typically the entire buffer and thus the
* entire page.
*/
if (eoff > soff) {
vm_page_set_validclean(
m,
(vm_offset_t) (soff & PAGE_MASK),
(vm_offset_t) (eoff - soff)
);
}
Fix a few bugs with NFS and mmap caused by NFS' use of b_validoff and b_validend. The changes to vfs_bio.c are a bit ugly but hopefully can be tidied up later by a slight redesign. PR: kern/2573, kern/2754, kern/3046 (possibly) Reviewed by: dyson
1997-05-19 14:36:56 +00:00
}
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
/*
The soft and hard busy mechanism rely on the vm object lock to work. Unify the 2 concept into a real, minimal, sxlock where the shared acquisition represent the soft busy and the exclusive acquisition represent the hard busy. The old VPO_WANTED mechanism becames the hard-path for this new lock and it becomes per-page rather than per-object. The vm_object lock becames an interlock for this functionality: it can be held in both read or write mode. However, if the vm_object lock is held in read mode while acquiring or releasing the busy state, the thread owner cannot make any assumption on the busy state unless it is also busying it. Also: - Add a new flag to directly shared busy pages while vm_page_alloc and vm_page_grab are being executed. This will be very helpful once these functions happen under a read object lock. - Move the swapping sleep into its own per-object flag The KPI is heavilly changed this is why the version is bumped. It is very likely that some VM ports users will need to change their own code. Sponsored by: EMC / Isilon storage division Discussed with: alc Reviewed by: jeff, kib Tested by: gavin, bapt (older version) Tested by: pho, scottl
2013-08-09 11:11:11 +00:00
* Ensure that all buffer pages are not exclusive busied. If any page is
* exclusive busy, drain it.
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
*/
Both cluster_rbuild() and cluster_wbuild() sometimes set the pages shared busy without first draining the hard busy state. Previously it went unnoticed since VPO_BUSY and m->busy fields were distinct, and vm_page_io_start() did not verified that the passed page has VPO_BUSY flag cleared, but such page state is wrong. New implementation is more strict and catched this case. Drain the busy state as needed, before calling vm_page_sbusy(). Tested by: pho, jkim Sponsored by: The FreeBSD Foundation
2013-08-22 18:26:45 +00:00
void
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
vfs_drain_busy_pages(struct buf *bp)
{
vm_page_t m;
int i, last_busied;
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_ASSERT_WLOCKED(bp->b_bufobj->bo_object);
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
last_busied = 0;
for (i = 0; i < bp->b_npages; i++) {
m = bp->b_pages[i];
The soft and hard busy mechanism rely on the vm object lock to work. Unify the 2 concept into a real, minimal, sxlock where the shared acquisition represent the soft busy and the exclusive acquisition represent the hard busy. The old VPO_WANTED mechanism becames the hard-path for this new lock and it becomes per-page rather than per-object. The vm_object lock becames an interlock for this functionality: it can be held in both read or write mode. However, if the vm_object lock is held in read mode while acquiring or releasing the busy state, the thread owner cannot make any assumption on the busy state unless it is also busying it. Also: - Add a new flag to directly shared busy pages while vm_page_alloc and vm_page_grab are being executed. This will be very helpful once these functions happen under a read object lock. - Move the swapping sleep into its own per-object flag The KPI is heavilly changed this is why the version is bumped. It is very likely that some VM ports users will need to change their own code. Sponsored by: EMC / Isilon storage division Discussed with: alc Reviewed by: jeff, kib Tested by: gavin, bapt (older version) Tested by: pho, scottl
2013-08-09 11:11:11 +00:00
if (vm_page_xbusied(m)) {
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
for (; last_busied < i; last_busied++)
The vm_pageout_flush() functions sbusies pages in the passed pages run. After that, the pager put method is called, usually translated to VOP_WRITE(). For the filesystems which use buffer cache, bufwrite() sbusies the buffer pages again, waiting for the xbusy state to drain. The later is done in vfs_drain_busy_pages(), which is called with the buffer pages already sbusied (by vm_pageout_flush()). Since vfs_drain_busy_pages() can only wait for one page at the time, and during the wait, the object lock is dropped, previous pages in the buffer must be protected from other threads busying them. Up to the moment, it was done by xbusying the pages, that is incompatible with the sbusy state in the new implementation of busy. Switch to sbusy. Reported and tested by: pho Sponsored by: The FreeBSD Foundation
2013-09-05 12:56:08 +00:00
vm_page_sbusy(bp->b_pages[last_busied]);
The soft and hard busy mechanism rely on the vm object lock to work. Unify the 2 concept into a real, minimal, sxlock where the shared acquisition represent the soft busy and the exclusive acquisition represent the hard busy. The old VPO_WANTED mechanism becames the hard-path for this new lock and it becomes per-page rather than per-object. The vm_object lock becames an interlock for this functionality: it can be held in both read or write mode. However, if the vm_object lock is held in read mode while acquiring or releasing the busy state, the thread owner cannot make any assumption on the busy state unless it is also busying it. Also: - Add a new flag to directly shared busy pages while vm_page_alloc and vm_page_grab are being executed. This will be very helpful once these functions happen under a read object lock. - Move the swapping sleep into its own per-object flag The KPI is heavilly changed this is why the version is bumped. It is very likely that some VM ports users will need to change their own code. Sponsored by: EMC / Isilon storage division Discussed with: alc Reviewed by: jeff, kib Tested by: gavin, bapt (older version) Tested by: pho, scottl
2013-08-09 11:11:11 +00:00
while (vm_page_xbusied(m)) {
vm_page_lock(m);
VM_OBJECT_WUNLOCK(bp->b_bufobj->bo_object);
vm_page_busy_sleep(m, "vbpage");
VM_OBJECT_WLOCK(bp->b_bufobj->bo_object);
}
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
}
}
for (i = 0; i < last_busied; i++)
The vm_pageout_flush() functions sbusies pages in the passed pages run. After that, the pager put method is called, usually translated to VOP_WRITE(). For the filesystems which use buffer cache, bufwrite() sbusies the buffer pages again, waiting for the xbusy state to drain. The later is done in vfs_drain_busy_pages(), which is called with the buffer pages already sbusied (by vm_pageout_flush()). Since vfs_drain_busy_pages() can only wait for one page at the time, and during the wait, the object lock is dropped, previous pages in the buffer must be protected from other threads busying them. Up to the moment, it was done by xbusying the pages, that is incompatible with the sbusy state in the new implementation of busy. Switch to sbusy. Reported and tested by: pho Sponsored by: The FreeBSD Foundation
2013-09-05 12:56:08 +00:00
vm_page_sunbusy(bp->b_pages[i]);
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
}
Only do object paging_in_progress wakeups if someone is waiting on this condition. Added some comments. Submitted by: John Dyson
1995-02-22 09:16:07 +00:00
/*
* This routine is called before a device strategy routine.
* It is used to tell the VM system that paging I/O is in
* progress, and treat the pages associated with the buffer
The soft and hard busy mechanism rely on the vm object lock to work. Unify the 2 concept into a real, minimal, sxlock where the shared acquisition represent the soft busy and the exclusive acquisition represent the hard busy. The old VPO_WANTED mechanism becames the hard-path for this new lock and it becomes per-page rather than per-object. The vm_object lock becames an interlock for this functionality: it can be held in both read or write mode. However, if the vm_object lock is held in read mode while acquiring or releasing the busy state, the thread owner cannot make any assumption on the busy state unless it is also busying it. Also: - Add a new flag to directly shared busy pages while vm_page_alloc and vm_page_grab are being executed. This will be very helpful once these functions happen under a read object lock. - Move the swapping sleep into its own per-object flag The KPI is heavilly changed this is why the version is bumped. It is very likely that some VM ports users will need to change their own code. Sponsored by: EMC / Isilon storage division Discussed with: alc Reviewed by: jeff, kib Tested by: gavin, bapt (older version) Tested by: pho, scottl
2013-08-09 11:11:11 +00:00
* almost as being exclusive busy. Also the object paging_in_progress
Only do object paging_in_progress wakeups if someone is waiting on this condition. Added some comments. Submitted by: John Dyson
1995-02-22 09:16:07 +00:00
* flag is handled to make sure that the object doesn't become
* inconsistant.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* Since I/O has not been initiated yet, certain buffer flags
Move B_ERROR flag to b_ioflags and call it BIO_ERROR. (Much of this done by script) Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED. Move b_pblkno and b_iodone_chain to struct bio while we transition, they will be obsoleted once bio structs chain/stack. Add bio_queue field for struct bio aware disksort. Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
* such as BIO_ERROR or B_INVAL may be in an inconsistant state
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* and should be ignored.
Only do object paging_in_progress wakeups if someone is waiting on this condition. Added some comments. Submitted by: John Dyson
1995-02-22 09:16:07 +00:00
*/
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
void
stylistic polishing.
2004-09-15 20:54:23 +00:00
vfs_busy_pages(struct buf *bp, int clear_modify)
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
{
Correctly handle misaligned VMIO buffer (whose start or end offset in the VM object are not page aligned). This should fix the mount_msdos panic after a failed attemp to mount as ffs. Reviewed By: Matthew Dillon <dillon@apollo.backplane.com> Archie Cobbs <archie@whistle.com> Dmitrij Tejblum <dima@tejblum.dnttm.rssi.ru>
1998-12-22 14:43:58 +00:00
int i, bogus;
undent some functions a bit.
2004-09-15 21:08:58 +00:00
vm_object_t obj;
vm_ooffset_t foff;
vm_page_t m;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
undent some functions a bit.
2004-09-15 21:08:58 +00:00
if (!(bp->b_flags & B_VMIO))
return;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
Change buf->b_object to buf->b_bufobj->bo_object some whitespace fixes.
2004-11-04 09:06:54 +00:00
obj = bp->b_bufobj->bo_object;
undent some functions a bit.
2004-09-15 21:08:58 +00:00
foff = bp->b_offset;
KASSERT(bp->b_offset != NOOFFSET,
("vfs_busy_pages: no buffer offset"));
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WLOCK(obj);
Reorganize the code in bdwrite() which handles move of dirtiness from the buffer pages to buffer. Combine the code to set buffer dirty range (previously in vfs_setdirty()) and to clean the pages (vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now the vm object lock is acquired only once. Drain the VPO_BUSY bit of the buffer pages before setting valid and clean bits in vfs_clean_pages_dirty_buf() with new helper vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not busy. In vfs_busy_pages(), move the wait for draining of VPO_BUSY before the dirtyness handling, to follow the structure of vfs_clean_pages_dirty_buf(). Reported and tested by: pho Suggested and reviewed by: alc MFC after: 2 weeks
2010-06-08 17:54:28 +00:00
vfs_drain_busy_pages(bp);
Refactor vfs_setdirty(), creating vfs_setdirty_locked_object(). Call vfs_setdirty_locked_object() from vfs_busy_pages() instead of vfs_setdirty(), thereby eliminating a second acquisition and release of the same vm object lock.
2006-10-29 00:04:39 +00:00
if (bp->b_bufsize != 0)
vfs_setdirty_locked_object(bp);
undent some functions a bit.
2004-09-15 21:08:58 +00:00
bogus = 0;
for (i = 0; i < bp->b_npages; i++) {
m = bp->b_pages[i];
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
undent some functions a bit.
2004-09-15 21:08:58 +00:00
if ((bp->b_flags & B_CLUSTER) == 0) {
vm_object_pip_add(obj, 1);
The soft and hard busy mechanism rely on the vm object lock to work. Unify the 2 concept into a real, minimal, sxlock where the shared acquisition represent the soft busy and the exclusive acquisition represent the hard busy. The old VPO_WANTED mechanism becames the hard-path for this new lock and it becomes per-page rather than per-object. The vm_object lock becames an interlock for this functionality: it can be held in both read or write mode. However, if the vm_object lock is held in read mode while acquiring or releasing the busy state, the thread owner cannot make any assumption on the busy state unless it is also busying it. Also: - Add a new flag to directly shared busy pages while vm_page_alloc and vm_page_grab are being executed. This will be very helpful once these functions happen under a read object lock. - Move the swapping sleep into its own per-object flag The KPI is heavilly changed this is why the version is bumped. It is very likely that some VM ports users will need to change their own code. Sponsored by: EMC / Isilon storage division Discussed with: alc Reviewed by: jeff, kib Tested by: gavin, bapt (older version) Tested by: pho, scottl
2013-08-09 11:11:11 +00:00
vm_page_sbusy(m);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
undent some functions a bit.
2004-09-15 21:08:58 +00:00
/*
* When readying a buffer for a read ( i.e
* clear_modify == 0 ), it is important to do
* bogus_page replacement for valid pages in
* partially instantiated buffers. Partially
* instantiated buffers can, in turn, occur when
* reconstituting a buffer from its VM backing store
* base. We only have to do this if B_CACHE is
* clear ( which causes the I/O to occur in the
* first place ). The replacement prevents the read
* I/O from overwriting potentially dirty VM-backed
* pages. XXX bogus page replacement is, uh, bogus.
* It may not work properly with small-block devices.
* We need to find a better way.
*/
Revert CVS revision 1.94 (svn r16840). Current pmap implementations don't suffer from the race condition that motivated revision 1.94. Consequently, the work-around that was implemented by revision 1.94 is no longer needed. Moreover, reverting this work-around eliminates the need for vfs_busy_pages() to acquire the page queues lock when preparing a buffer for read. Reviewed by: tegge
2009-05-11 05:16:57 +00:00
if (clear_modify) {
pmap_remove_write(m);
Eliminate page queues locking from bufdone_finish() through the following changes: Rename vfs_page_set_valid() to vfs_page_set_validclean() to reflect what this function actually does. Suggested by: tegge Introduce a new version of vfs_page_set_valid() that does no more than what the function's name implies. Specifically, it does not update the page's dirty mask, and thus it does not require the page queues lock to be held. Update two of the three callers to the old vfs_page_set_valid() to call vfs_page_set_validclean() instead because they actually require the page's dirty mask to be cleared. Introduce vm_page_set_valid(). Reviewed by: tegge
2009-05-13 05:39:39 +00:00
vfs_page_set_validclean(bp, foff, m);
Revert CVS revision 1.94 (svn r16840). Current pmap implementations don't suffer from the race condition that motivated revision 1.94. Consequently, the work-around that was implemented by revision 1.94 is no longer needed. Moreover, reverting this work-around eliminates the need for vfs_busy_pages() to acquire the page queues lock when preparing a buffer for read. Reviewed by: tegge
2009-05-11 05:16:57 +00:00
} else if (m->valid == VM_PAGE_BITS_ALL &&
Change buf->b_object to buf->b_bufobj->bo_object some whitespace fixes.
2004-11-04 09:06:54 +00:00
(bp->b_flags & B_CACHE) == 0) {
undent some functions a bit.
2004-09-15 21:08:58 +00:00
bp->b_pages[i] = bogus_page;
bogus++;
}
foff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WUNLOCK(obj);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if (bogus && (bp->b_flags & B_UNMAPPED) == 0) {
BUF_CHECK_MAPPED(bp);
undent some functions a bit.
2004-09-15 21:08:58 +00:00
pmap_qenter(trunc_page((vm_offset_t)bp->b_data),
bp->b_pages, bp->b_npages);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
}
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
Introduce vfs_bio_set_valid() and use it from ffs_realloccg(). This eliminates the misuse of vfs_bio_clrbuf() by ffs_realloccg(). In collaboration with: tegge
2009-05-17 20:26:00 +00:00
/*
* vfs_bio_set_valid:
*
* Set the range within the buffer to valid. The range is
* relative to the beginning of the buffer, b_offset. Note that
* b_offset itself may be offset from the beginning of the first
* page.
*/
void
vfs_bio_set_valid(struct buf *bp, int base, int size)
{
int i, n;
vm_page_t m;
if (!(bp->b_flags & B_VMIO))
return;
/*
* Fixup base to be relative to beginning of first page.
* Set initial n to be the maximum number of bytes in the
* first page that can be validated.
*/
base += (bp->b_offset & PAGE_MASK);
n = PAGE_SIZE - (base & PAGE_MASK);
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WLOCK(bp->b_bufobj->bo_object);
Introduce vfs_bio_set_valid() and use it from ffs_realloccg(). This eliminates the misuse of vfs_bio_clrbuf() by ffs_realloccg(). In collaboration with: tegge
2009-05-17 20:26:00 +00:00
for (i = base / PAGE_SIZE; size > 0 && i < bp->b_npages; ++i) {
m = bp->b_pages[i];
if (n > size)
n = size;
Rename vm_page_set_valid() to vm_page_set_valid_range(). The vm_page_set_valid() is the most reasonable name for the m->valid accessor. Reviewed by: attilio, alc
2011-11-30 17:39:00 +00:00
vm_page_set_valid_range(m, base & PAGE_MASK, n);
Introduce vfs_bio_set_valid() and use it from ffs_realloccg(). This eliminates the misuse of vfs_bio_clrbuf() by ffs_realloccg(). In collaboration with: tegge
2009-05-17 20:26:00 +00:00
base += n;
size -= n;
n = PAGE_SIZE;
}
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WUNLOCK(bp->b_bufobj->bo_object);
Introduce vfs_bio_set_valid() and use it from ffs_realloccg(). This eliminates the misuse of vfs_bio_clrbuf() by ffs_realloccg(). In collaboration with: tegge
2009-05-17 20:26:00 +00:00
}
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* vfs_bio_clrbuf:
*
Several changes to vfs_bio_clrbuf(): Provide a more descriptive comment. Eliminate dead code. The page cannot possibly have PG_ZERO set. Eliminate unnecessary blank lines. Reviewed by: tegge
2009-05-17 23:25:53 +00:00
* If the specified buffer is a non-VMIO buffer, clear the entire
* buffer. If the specified buffer is a VMIO buffer, clear and
* validate only the previously invalid portions of the buffer.
* This routine essentially fakes an I/O, so we need to clear
* BIO_ERROR and B_INVAL.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* Note that while we only theoretically need to clear through b_bcount,
* we go ahead and clear through b_bufsize.
*/
Changes from John Dyson and myself: Fixed remaining known bugs in the buffer IO and VM system. vfs_bio.c: Fixed some race conditions and locking bugs. Improved performance by removing some (now) unnecessary code and fixing some broken logic. Fixed process accounting of # of FS outputs. Properly handle NFS interrupts (B_EINTR). (various) Replaced calls to clrbuf() with calls to an optimized routine call vfs_bio_clrbuf(). (various FS sync) Sync out modified vnode_pager backed pages. ffs_vnops.c: Do two passes: Sync out file data first, then indirect blocks. vm_fault.c: Fixed deadly embrace caused by acquiring locks in the wrong order. vnode_pager.c: Changed to use buffer I/O system for writing out modified pages. This should fix the problem with the modification date previous not getting updated. Also dramatically simplifies the code. Note that this is going to change in the future and be implemented via VOP_PUTPAGES(). vm_object.c: Fixed a pile of bugs related to cleaning (vnode) objects. The performance of vm_object_page_clean() is terrible when dealing with huge objects, but this will change when we implement a binary tree to keep the object pages sorted. vm_pageout.c: Fixed broken clustering of pageouts. Fixed race conditions and other lockup style bugs in the scanning of pages. Improved performance.
1995-04-09 06:02:46 +00:00
void
Fix a bug in vfs_bio_clrbuf(). The single-page-clrbuf optimization was improperly clearing more then just the invalid portions of the page. (This bug is not known to have been triggered by anything). Submitted by: tegge MFC after: 7 days
2002-06-22 19:09:35 +00:00
vfs_bio_clrbuf(struct buf *bp)
{
Rewrite the vfs_bio_clrbuf(9) to not access the b_data for B_VMIO buffers directly, use pmap_zero_page_area(9) for each zeroing page region instead. Sponsored by: The FreeBSD Foundation Tested by: pho MFC after: 2 weeks
2013-03-14 19:48:25 +00:00
int i, j, mask, sa, ea, slide;
Introduce a global lock for the vm subsystem (vm_mtx). vm_mtx does not recurse and is required for most low level vm operations. faults can not be taken without holding Giant. Memory subsystems can now call the base page allocators safely. Almost all atomic ops were removed as they are covered under the vm mutex. Alpha and ia64 now need to catch up to i386's trap handlers. FFS and NFS have been tested, other filesystems will need minor changes (grabbing the vm lock when twiddling page properties). Reviewed (partially) by: jake, jhb
2001-05-19 01:28:09 +00:00
undent some functions a bit.
2004-09-15 21:08:58 +00:00
if ((bp->b_flags & (B_VMIO | B_MALLOC)) != B_VMIO) {
clrbuf(bp);
return;
}
bp->b_flags &= ~B_INVAL;
bp->b_ioflags &= ~BIO_ERROR;
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WLOCK(bp->b_bufobj->bo_object);
Change buf->b_object to buf->b_bufobj->bo_object some whitespace fixes.
2004-11-04 09:06:54 +00:00
if ((bp->b_npages == 1) && (bp->b_bufsize < PAGE_SIZE) &&
undent some functions a bit.
2004-09-15 21:08:58 +00:00
(bp->b_offset & PAGE_MASK) == 0) {
if (bp->b_pages[0] == bogus_page)
goto unlock;
mask = (1 << (bp->b_bufsize / DEV_BSIZE)) - 1;
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_ASSERT_WLOCKED(bp->b_pages[0]->object);
undent some functions a bit.
2004-09-15 21:08:58 +00:00
if ((bp->b_pages[0]->valid & mask) == mask)
goto unlock;
Several changes to vfs_bio_clrbuf(): Provide a more descriptive comment. Eliminate dead code. The page cannot possibly have PG_ZERO set. Eliminate unnecessary blank lines. Reviewed by: tegge
2009-05-17 23:25:53 +00:00
if ((bp->b_pages[0]->valid & mask) == 0) {
Rewrite the vfs_bio_clrbuf(9) to not access the b_data for B_VMIO buffers directly, use pmap_zero_page_area(9) for each zeroing page region instead. Sponsored by: The FreeBSD Foundation Tested by: pho MFC after: 2 weeks
2013-03-14 19:48:25 +00:00
pmap_zero_page_area(bp->b_pages[0], 0, bp->b_bufsize);
undent some functions a bit.
2004-09-15 21:08:58 +00:00
bp->b_pages[0]->valid |= mask;
goto unlock;
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
}
undent some functions a bit.
2004-09-15 21:08:58 +00:00
}
Rewrite the vfs_bio_clrbuf(9) to not access the b_data for B_VMIO buffers directly, use pmap_zero_page_area(9) for each zeroing page region instead. Sponsored by: The FreeBSD Foundation Tested by: pho MFC after: 2 weeks
2013-03-14 19:48:25 +00:00
sa = bp->b_offset & PAGE_MASK;
slide = 0;
for (i = 0; i < bp->b_npages; i++, sa = 0) {
slide = imin(slide + PAGE_SIZE, bp->b_offset + bp->b_bufsize);
ea = slide & PAGE_MASK;
if (ea == 0)
ea = PAGE_SIZE;
undent some functions a bit.
2004-09-15 21:08:58 +00:00
if (bp->b_pages[i] == bogus_page)
continue;
Rewrite the vfs_bio_clrbuf(9) to not access the b_data for B_VMIO buffers directly, use pmap_zero_page_area(9) for each zeroing page region instead. Sponsored by: The FreeBSD Foundation Tested by: pho MFC after: 2 weeks
2013-03-14 19:48:25 +00:00
j = sa / DEV_BSIZE;
undent some functions a bit.
2004-09-15 21:08:58 +00:00
mask = ((1 << ((ea - sa) / DEV_BSIZE)) - 1) << j;
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_ASSERT_WLOCKED(bp->b_pages[i]->object);
undent some functions a bit.
2004-09-15 21:08:58 +00:00
if ((bp->b_pages[i]->valid & mask) == mask)
continue;
Several changes to vfs_bio_clrbuf(): Provide a more descriptive comment. Eliminate dead code. The page cannot possibly have PG_ZERO set. Eliminate unnecessary blank lines. Reviewed by: tegge
2009-05-17 23:25:53 +00:00
if ((bp->b_pages[i]->valid & mask) == 0)
Rewrite the vfs_bio_clrbuf(9) to not access the b_data for B_VMIO buffers directly, use pmap_zero_page_area(9) for each zeroing page region instead. Sponsored by: The FreeBSD Foundation Tested by: pho MFC after: 2 weeks
2013-03-14 19:48:25 +00:00
pmap_zero_page_area(bp->b_pages[i], sa, ea - sa);
Several changes to vfs_bio_clrbuf(): Provide a more descriptive comment. Eliminate dead code. The page cannot possibly have PG_ZERO set. Eliminate unnecessary blank lines. Reviewed by: tegge
2009-05-17 23:25:53 +00:00
else {
undent some functions a bit.
2004-09-15 21:08:58 +00:00
for (; sa < ea; sa += DEV_BSIZE, j++) {
Rewrite the vfs_bio_clrbuf(9) to not access the b_data for B_VMIO buffers directly, use pmap_zero_page_area(9) for each zeroing page region instead. Sponsored by: The FreeBSD Foundation Tested by: pho MFC after: 2 weeks
2013-03-14 19:48:25 +00:00
if ((bp->b_pages[i]->valid & (1 << j)) == 0) {
pmap_zero_page_area(bp->b_pages[i],
sa, DEV_BSIZE);
}
Changes from John Dyson and myself: Fixed remaining known bugs in the buffer IO and VM system. vfs_bio.c: Fixed some race conditions and locking bugs. Improved performance by removing some (now) unnecessary code and fixing some broken logic. Fixed process accounting of # of FS outputs. Properly handle NFS interrupts (B_EINTR). (various) Replaced calls to clrbuf() with calls to an optimized routine call vfs_bio_clrbuf(). (various FS sync) Sync out modified vnode_pager backed pages. ffs_vnops.c: Do two passes: Sync out file data first, then indirect blocks. vm_fault.c: Fixed deadly embrace caused by acquiring locks in the wrong order. vnode_pager.c: Changed to use buffer I/O system for writing out modified pages. This should fix the problem with the modification date previous not getting updated. Also dramatically simplifies the code. Note that this is going to change in the future and be implemented via VOP_PUTPAGES(). vm_object.c: Fixed a pile of bugs related to cleaning (vnode) objects. The performance of vm_object_page_clean() is terrible when dealing with huge objects, but this will change when we implement a binary tree to keep the object pages sorted. vm_pageout.c: Fixed broken clustering of pageouts. Fixed race conditions and other lockup style bugs in the scanning of pages. Improved performance.
1995-04-09 06:02:46 +00:00
}
}
undent some functions a bit.
2004-09-15 21:08:58 +00:00
bp->b_pages[i]->valid |= mask;
Changes from John Dyson and myself: Fixed remaining known bugs in the buffer IO and VM system. vfs_bio.c: Fixed some race conditions and locking bugs. Improved performance by removing some (now) unnecessary code and fixing some broken logic. Fixed process accounting of # of FS outputs. Properly handle NFS interrupts (B_EINTR). (various) Replaced calls to clrbuf() with calls to an optimized routine call vfs_bio_clrbuf(). (various FS sync) Sync out modified vnode_pager backed pages. ffs_vnops.c: Do two passes: Sync out file data first, then indirect blocks. vm_fault.c: Fixed deadly embrace caused by acquiring locks in the wrong order. vnode_pager.c: Changed to use buffer I/O system for writing out modified pages. This should fix the problem with the modification date previous not getting updated. Also dramatically simplifies the code. Note that this is going to change in the future and be implemented via VOP_PUTPAGES(). vm_object.c: Fixed a pile of bugs related to cleaning (vnode) objects. The performance of vm_object_page_clean() is terrible when dealing with huge objects, but this will change when we implement a binary tree to keep the object pages sorted. vm_pageout.c: Fixed broken clustering of pageouts. Fixed race conditions and other lockup style bugs in the scanning of pages. Improved performance.
1995-04-09 06:02:46 +00:00
}
undent some functions a bit.
2004-09-15 21:08:58 +00:00
unlock:
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WUNLOCK(bp->b_bufobj->bo_object);
undent some functions a bit.
2004-09-15 21:08:58 +00:00
bp->b_resid = 0;
Changes from John Dyson and myself: Fixed remaining known bugs in the buffer IO and VM system. vfs_bio.c: Fixed some race conditions and locking bugs. Improved performance by removing some (now) unnecessary code and fixing some broken logic. Fixed process accounting of # of FS outputs. Properly handle NFS interrupts (B_EINTR). (various) Replaced calls to clrbuf() with calls to an optimized routine call vfs_bio_clrbuf(). (various FS sync) Sync out modified vnode_pager backed pages. ffs_vnops.c: Do two passes: Sync out file data first, then indirect blocks. vm_fault.c: Fixed deadly embrace caused by acquiring locks in the wrong order. vnode_pager.c: Changed to use buffer I/O system for writing out modified pages. This should fix the problem with the modification date previous not getting updated. Also dramatically simplifies the code. Note that this is going to change in the future and be implemented via VOP_PUTPAGES(). vm_object.c: Fixed a pile of bugs related to cleaning (vnode) objects. The performance of vm_object_page_clean() is terrible when dealing with huge objects, but this will change when we implement a binary tree to keep the object pages sorted. vm_pageout.c: Fixed broken clustering of pageouts. Fixed race conditions and other lockup style bugs in the scanning of pages. Improved performance.
1995-04-09 06:02:46 +00:00
}
Add a helper function vfs_bio_bzero_buf() to zero the portion of the buffer, transparently handling mapped or unmapped buffers. Its intent is to replace the use of bzero(bp->b_data) in cases where the buffer might be unmapped, to avoid unneeded upgrades. Sponsored by: The FreeBSD Foundation Tested by: pho
2013-03-19 14:27:14 +00:00
void
vfs_bio_bzero_buf(struct buf *bp, int base, int size)
{
vm_page_t m;
int i, n;
if ((bp->b_flags & B_UNMAPPED) == 0) {
BUF_CHECK_MAPPED(bp);
bzero(bp->b_data + base, size);
} else {
BUF_CHECK_UNMAPPED(bp);
n = PAGE_SIZE - (base & PAGE_MASK);
for (i = base / PAGE_SIZE; size > 0 && i < bp->b_npages; ++i) {
m = bp->b_pages[i];
if (n > size)
n = size;
pmap_zero_page_area(m, base & PAGE_MASK, n);
base += n;
size -= n;
n = PAGE_SIZE;
}
}
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
- Always call bfreekva() w/o vm_mtx held. - Always call vfs_setdirty() with vm_mtx held. - Fix an old comment: vm_hold_unload_pages is called vm_hold_free_pages() nowadays. - Always call vm_hold_free_pages() w/o vm_mtx held.
2001-05-23 22:24:49 +00:00
* vm_hold_load_pages and vm_hold_free_pages get pages into
Only do object paging_in_progress wakeups if someone is waiting on this condition. Added some comments. Submitted by: John Dyson
1995-02-22 09:16:07 +00:00
* a buffers address space. The pages are anonymous and are
* not associated with a file object.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Introduce a global lock for the vm subsystem (vm_mtx). vm_mtx does not recurse and is required for most low level vm operations. faults can not be taken without holding Giant. Memory subsystems can now call the base page allocators safely. Almost all atomic ops were removed as they are covered under the vm mutex. Alpha and ia64 now need to catch up to i386's trap handlers. FFS and NFS have been tested, other filesystems will need minor changes (grabbing the vm lock when twiddling page properties). Reviewed (partially) by: jake, jhb
2001-05-19 01:28:09 +00:00
static void
stylistic polishing.
2004-09-15 20:54:23 +00:00
vm_hold_load_pages(struct buf *bp, vm_offset_t from, vm_offset_t to)
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
{
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
vm_offset_t pg;
vm_page_t p;
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
int index;
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
BUF_CHECK_MAPPED(bp);
Rework vm_hold_{load,free}_pages to calculate an index once and use that. At the same time, be sure to page-truncate bp->b_data so that the result of the calculation isn't negative.
1996-01-06 23:23:02 +00:00
to = round_page(to);
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
from = round_page(from);
Fixed two potentially serious classes of bugs: 1) The vnode pager wasn't properly tracking the file size due to "size" being page rounded in some cases and not in others. This sometimes resulted in corrupted files. First noticed by Terry Lambert. Fixed by changing the "size" pager_alloc parameter to be a 64bit byte value (as opposed to a 32bit page index) and changing the pagers and their callers to deal with this properly. 2) Fixed a bogus type cast in round_page() and trunc_page() that caused some 64bit offsets and sizes to be scrambled. Removing the cast required adding casts at a few dozen callers. There may be problems with other bogus casts in close-by macros. A quick check seemed to indicate that those were okay, however.
1998-10-13 08:24:45 +00:00
index = (from - trunc_page((vm_offset_t)bp->b_data)) >> PAGE_SHIFT;
Rework vm_hold_{load,free}_pages to calculate an index once and use that. At the same time, be sure to page-truncate bp->b_data so that the result of the calculation isn't negative.
1996-01-06 23:23:02 +00:00
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
for (pg = from; pg < to; pg += PAGE_SIZE, index++) {
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
tryagain:
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
/*
* note: must allocate system pages since blocking here
Modify vm_hold_load_pages() to allocate pages using VM_ALLOC_NOOBJ rather than using the kernel object. This allows the elimination of page queues locking from vm_hold_free_pages().
2009-05-29 18:35:51 +00:00
* could interfere with paging I/O, no matter which
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
* process we are.
*/
Eliminate vestiges of page coloring in VM_ALLOC_NOOBJ calls to vm_page_alloc(). While I'm here, for the sake of consistency, always specify the allocation class, such as VM_ALLOC_NORMAL, as the first of the flags.
2011-10-27 16:39:17 +00:00
p = vm_page_alloc(NULL, 0, VM_ALLOC_SYSTEM | VM_ALLOC_NOOBJ |
VM_ALLOC_WIRED | VM_ALLOC_COUNT((to - pg) >> PAGE_SHIFT));
if (p == NULL) {
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
VM_WAIT;
goto tryagain;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Convert all pmap_kenter/pmap_kremove pairs in MI code to use pmap_qenter/ pmap_qremove. pmap_kenter is not safe to use in MI code because it is not guaranteed to flush the mapping from the tlb on all cpus. If the process in question is preempted and migrates cpus between the call to pmap_kenter and pmap_kremove, the original cpu will be left with stale mappings in its tlb. This is currently not a problem for i386 because we do not use PG_G on SMP, and thus all mappings are flushed from the tlb on context switches, not just user mappings. This is not the case on all architectures, and if PG_G is to be used with SMP on i386 it will be a problem. This was committed by peter earlier as part of his fine grained tlb shootdown work for i386, which was backed out for other reasons. Reviewed by: peter
2002-03-17 00:56:41 +00:00
pmap_qenter(pg, &p, 1);
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
bp->b_pages[index] = p;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Re-institute a bugfix in allocation of anonymous buffer memory.
1997-09-21 04:49:30 +00:00
bp->b_npages = index;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
/* Return pages associated with this buf to the vm system */
Be consistent about "static" functions: if the function is marked static in its prototype, mark it static at the definition too. Inspired by: FlexeLint warning #512
2002-09-28 17:15:38 +00:00
static void
Change the implementation of vm_hold_free_pages() so that it performs at most one call to pmap_qremove(), and thus one TLB shootdown, instead of one call and TLB shootdown per page. Simplify the interface to vm_hold_free_pages(). MFC after: 3 weeks
2010-07-11 20:11:44 +00:00
vm_hold_free_pages(struct buf *bp, int newbsize)
While in the real world, I had a bad case of being swapped out for a lot of cycles. While waiting there I added a lot of the extra ()'s I have, (I have never used LISP to any extent). So I compiled the kernel with -Wall and shut up a lot of "suggest you add ()'s", removed a bunch of unused var's and added a couple of declarations here and there. Having a lap-top is highly recommended. My kernel still runs, yell at me if you kernel breaks.
1994-09-25 19:34:02 +00:00
{
Change the implementation of vm_hold_free_pages() so that it performs at most one call to pmap_qremove(), and thus one TLB shootdown, instead of one call and TLB shootdown per page. Simplify the interface to vm_hold_free_pages(). MFC after: 3 weeks
2010-07-11 20:11:44 +00:00
vm_offset_t from;
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
vm_page_t p;
Re-institute a bugfix in allocation of anonymous buffer memory.
1997-09-21 04:49:30 +00:00
int index, newnpages;
Rework vm_hold_{load,free}_pages to calculate an index once and use that. At the same time, be sure to page-truncate bp->b_data so that the result of the calculation isn't negative.
1996-01-06 23:23:02 +00:00
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
BUF_CHECK_MAPPED(bp);
Change the implementation of vm_hold_free_pages() so that it performs at most one call to pmap_qremove(), and thus one TLB shootdown, instead of one call and TLB shootdown per page. Simplify the interface to vm_hold_free_pages(). MFC after: 3 weeks
2010-07-11 20:11:44 +00:00
from = round_page((vm_offset_t)bp->b_data + newbsize);
newnpages = (from - trunc_page((vm_offset_t)bp->b_data)) >> PAGE_SHIFT;
if (bp->b_npages > newnpages)
pmap_qremove(from, bp->b_npages - newnpages);
for (index = newnpages; index < bp->b_npages; index++) {
Changes to support 1Tb filesizes. Pages are now named by an (object,index) pair instead of (object,offset) pair.
1995-12-11 04:58:34 +00:00
p = bp->b_pages[index];
Change the implementation of vm_hold_free_pages() so that it performs at most one call to pmap_qremove(), and thus one TLB shootdown, instead of one call and TLB shootdown per page. Simplify the interface to vm_hold_free_pages(). MFC after: 3 weeks
2010-07-11 20:11:44 +00:00
bp->b_pages[index] = NULL;
The soft and hard busy mechanism rely on the vm object lock to work. Unify the 2 concept into a real, minimal, sxlock where the shared acquisition represent the soft busy and the exclusive acquisition represent the hard busy. The old VPO_WANTED mechanism becames the hard-path for this new lock and it becomes per-page rather than per-object. The vm_object lock becames an interlock for this functionality: it can be held in both read or write mode. However, if the vm_object lock is held in read mode while acquiring or releasing the busy state, the thread owner cannot make any assumption on the busy state unless it is also busying it. Also: - Add a new flag to directly shared busy pages while vm_page_alloc and vm_page_grab are being executed. This will be very helpful once these functions happen under a read object lock. - Move the swapping sleep into its own per-object flag The KPI is heavilly changed this is why the version is bumped. It is very likely that some VM ports users will need to change their own code. Sponsored by: EMC / Isilon storage division Discussed with: alc Reviewed by: jeff, kib Tested by: gavin, bapt (older version) Tested by: pho, scottl
2013-08-09 11:11:11 +00:00
if (vm_page_sbusied(p))
Change the implementation of vm_hold_free_pages() so that it performs at most one call to pmap_qremove(), and thus one TLB shootdown, instead of one call and TLB shootdown per page. Simplify the interface to vm_hold_free_pages(). MFC after: 3 weeks
2010-07-11 20:11:44 +00:00
printf("vm_hold_free_pages: blkno: %jd, lblkno: %jd\n",
(intmax_t)bp->b_blkno, (intmax_t)bp->b_lblkno);
p->wire_count--;
vm_page_free(p);
atomic_subtract_int(&cnt.v_wire_count, 1);
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
}
Re-institute a bugfix in allocation of anonymous buffer memory.
1997-09-21 04:49:30 +00:00
bp->b_npages = newnpages;
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
}
Add a DDB command `show buffer', to display a struct buf. It's impossible to display everything, so i've chosen a small subset. Add more to this as you think seems useful.
1997-05-10 09:09:42 +00:00
Merge all the various copies of vmapbuf() and vunmapbuf() into a single portable copy. Note that pmap_extract() must be used instead of pmap_kextract(). This is precursor work to a reorganization of vmapbuf() to close remaining user/kernel races (which can lead to a panic).
2003-01-15 23:54:35 +00:00
/*
* Map an IO request into kernel virtual address space.
*
* All requests are (re)mapped into kernel VA space.
* Notice that we use b_bufsize for the size of the buffer
* to be mapped. b_bcount might be modified by the driver.
Close the remaining user address mapping races for physical I/O, CAM, and AIO. Still TODO: streamline useracc() checks. Reviewed by: alc, tegge MFC after: 7 days
2003-01-20 17:46:48 +00:00
*
* Note that even if the caller determines that the address space should
* be valid, a race or a smaller-file mapped into a larger space may
* actually cause vmapbuf() to fail, so all callers of vmapbuf() MUST
* check the return value.
Merge all the various copies of vmapbuf() and vunmapbuf() into a single portable copy. Note that pmap_extract() must be used instead of pmap_kextract(). This is precursor work to a reorganization of vmapbuf() to close remaining user/kernel races (which can lead to a panic).
2003-01-15 23:54:35 +00:00
*/
Close the remaining user address mapping races for physical I/O, CAM, and AIO. Still TODO: streamline useracc() checks. Reviewed by: alc, tegge MFC after: 7 days
2003-01-20 17:46:48 +00:00
int
Do not remap usermode pages into KVA for physio. Sponsored by: The FreeBSD Foundation Tested by: pho
2013-03-19 14:43:57 +00:00
vmapbuf(struct buf *bp, int mapbuf)
Merge all the various copies of vmapbuf() and vunmapbuf() into a single portable copy. Note that pmap_extract() must be used instead of pmap_kextract(). This is precursor work to a reorganization of vmapbuf() to close remaining user/kernel races (which can lead to a panic).
2003-01-15 23:54:35 +00:00
{
Introduce and use a new VM interface for temporarily pinning pages. This new interface replaces the combined use of vm_fault_quick() and pmap_extract_and_hold() throughout the kernel. In collaboration with: kib@
2010-12-25 21:26:56 +00:00
caddr_t kva;
Convert vmapbuf() from using pmap_extract() to using pmap_extract_and_hold(). Note, however, that GIANT_REQUIRED should not be removed until all platforms fully implement the "prot" parameter to pmap_extract_and_hold(). Reviewed by: tegge
2003-09-13 04:29:55 +00:00
vm_prot_t prot;
Introduce and use a new VM interface for temporarily pinning pages. This new interface replaces the combined use of vm_fault_quick() and pmap_extract_and_hold() throughout the kernel. In collaboration with: kib@
2010-12-25 21:26:56 +00:00
int pidx;
Merge all the various copies of vmapbuf() and vunmapbuf() into a single portable copy. Note that pmap_extract() must be used instead of pmap_kextract(). This is precursor work to a reorganization of vmapbuf() to close remaining user/kernel races (which can lead to a panic).
2003-01-15 23:54:35 +00:00
o Check the b_bufsize passed to vmapbuf() returning an error if it is invalid. o Remove a debugging printf() from vmapbuf(). Suggested by: tegge
2003-04-04 06:14:54 +00:00
if (bp->b_bufsize < 0)
return (-1);
stylistic polishing.
2004-09-15 20:54:23 +00:00
prot = VM_PROT_READ;
if (bp->b_iocmd == BIO_READ)
prot |= VM_PROT_WRITE; /* Less backwards than it looks */
Introduce and use a new VM interface for temporarily pinning pages. This new interface replaces the combined use of vm_fault_quick() and pmap_extract_and_hold() throughout the kernel. In collaboration with: kib@
2010-12-25 21:26:56 +00:00
if ((pidx = vm_fault_quick_hold_pages(&curproc->p_vmspace->vm_map,
(vm_offset_t)bp->b_data, bp->b_bufsize, prot, bp->b_pages,
btoc(MAXPHYS))) < 0)
return (-1);
Merge all the various copies of vmapbuf() and vunmapbuf() into a single portable copy. Note that pmap_extract() must be used instead of pmap_kextract(). This is precursor work to a reorganization of vmapbuf() to close remaining user/kernel races (which can lead to a panic).
2003-01-15 23:54:35 +00:00
bp->b_npages = pidx;
Do not remap usermode pages into KVA for physio. Sponsored by: The FreeBSD Foundation Tested by: pho
2013-03-19 14:43:57 +00:00
if (mapbuf || !unmapped_buf_allowed) {
pmap_qenter((vm_offset_t)bp->b_saveaddr, bp->b_pages, pidx);
kva = bp->b_saveaddr;
bp->b_saveaddr = bp->b_data;
bp->b_data = kva + (((vm_offset_t)bp->b_data) & PAGE_MASK);
bp->b_flags &= ~B_UNMAPPED;
} else {
bp->b_flags |= B_UNMAPPED;
bp->b_offset = ((vm_offset_t)bp->b_data) & PAGE_MASK;
bp->b_saveaddr = bp->b_data;
bp->b_data = unmapped_buf;
}
Close the remaining user address mapping races for physical I/O, CAM, and AIO. Still TODO: streamline useracc() checks. Reviewed by: alc, tegge MFC after: 7 days
2003-01-20 17:46:48 +00:00
return(0);
Merge all the various copies of vmapbuf() and vunmapbuf() into a single portable copy. Note that pmap_extract() must be used instead of pmap_kextract(). This is precursor work to a reorganization of vmapbuf() to close remaining user/kernel races (which can lead to a panic).
2003-01-15 23:54:35 +00:00
}
/*
* Free the io map PTEs associated with this IO operation.
* We also invalidate the TLB entries and restore the original b_addr.
*/
void
vunmapbuf(struct buf *bp)
{
int npages;
npages = bp->b_npages;
Do not remap usermode pages into KVA for physio. Sponsored by: The FreeBSD Foundation Tested by: pho
2013-03-19 14:43:57 +00:00
if (bp->b_flags & B_UNMAPPED)
bp->b_flags &= ~B_UNMAPPED;
else
pmap_qremove(trunc_page((vm_offset_t)bp->b_data), npages);
Implement and use a single optimized function for unholding a set of pages. Reviewed by: kib@
2010-12-17 22:41:22 +00:00
vm_page_unhold_pages(bp->b_pages, npages);
On Alan's advice, rather than do a wholesale conversion on a single architecture from page queue lock to a hashed array of page locks (based on a patch by Jeff Roberson), I've implemented page lock support in the MI code and have only moved vm_page's hold_count out from under page queue mutex to page lock. This changes pmap_extract_and_hold on all pmaps. Supported by: Bitgravity Inc. Discussed with: alc, jeffr, and kib
2010-04-30 00:46:43 +00:00
Merge all the various copies of vmapbuf() and vunmapbuf() into a single portable copy. Note that pmap_extract() must be used instead of pmap_kextract(). This is precursor work to a reorganization of vmapbuf() to close remaining user/kernel races (which can lead to a panic).
2003-01-15 23:54:35 +00:00
bp->b_data = bp->b_saveaddr;
}
Add a DDB command `show buffer', to display a struct buf. It's impossible to display everything, so i've chosen a small subset. Add more to this as you think seems useful.
1997-05-10 09:09:42 +00:00
- Add a lock for protecting against msleep(bp, ...) wakeup(bp) races. - Create a new function bdone() which sets B_DONE and calls wakup(bp). This is suitable for use as b_iodone for buf consumers who are not going through the buf cache. - Create a new function bwait() which waits for the buf to be done at a set priority and with a specific wmesg. - Replace several cases where the above functionality was implemented without locking with the new functions.
2003-03-13 07:31:45 +00:00
void
bdone(struct buf *bp)
{
- Reduce contention on the global bdonelock and bpinlock by using a pool mutex to protect these sleep/wakeup/counter races. This still is preferable to bloating each bio with a mtx.
2008-03-21 10:00:05 +00:00
struct mtx *mtxp;
stylistic polishing.
2004-09-15 20:54:23 +00:00
- Reduce contention on the global bdonelock and bpinlock by using a pool mutex to protect these sleep/wakeup/counter races. This still is preferable to bloating each bio with a mtx.
2008-03-21 10:00:05 +00:00
mtxp = mtx_pool_find(mtxpool_sleep, bp);
mtx_lock(mtxp);
- Add a lock for protecting against msleep(bp, ...) wakeup(bp) races. - Create a new function bdone() which sets B_DONE and calls wakup(bp). This is suitable for use as b_iodone for buf consumers who are not going through the buf cache. - Create a new function bwait() which waits for the buf to be done at a set priority and with a specific wmesg. - Replace several cases where the above functionality was implemented without locking with the new functions.
2003-03-13 07:31:45 +00:00
bp->b_flags |= B_DONE;
wakeup(bp);
- Reduce contention on the global bdonelock and bpinlock by using a pool mutex to protect these sleep/wakeup/counter races. This still is preferable to bloating each bio with a mtx.
2008-03-21 10:00:05 +00:00
mtx_unlock(mtxp);
- Add a lock for protecting against msleep(bp, ...) wakeup(bp) races. - Create a new function bdone() which sets B_DONE and calls wakup(bp). This is suitable for use as b_iodone for buf consumers who are not going through the buf cache. - Create a new function bwait() which waits for the buf to be done at a set priority and with a specific wmesg. - Replace several cases where the above functionality was implemented without locking with the new functions.
2003-03-13 07:31:45 +00:00
}
void
bwait(struct buf *bp, u_char pri, const char *wchan)
{
- Reduce contention on the global bdonelock and bpinlock by using a pool mutex to protect these sleep/wakeup/counter races. This still is preferable to bloating each bio with a mtx.
2008-03-21 10:00:05 +00:00
struct mtx *mtxp;
stylistic polishing.
2004-09-15 20:54:23 +00:00
- Reduce contention on the global bdonelock and bpinlock by using a pool mutex to protect these sleep/wakeup/counter races. This still is preferable to bloating each bio with a mtx.
2008-03-21 10:00:05 +00:00
mtxp = mtx_pool_find(mtxpool_sleep, bp);
mtx_lock(mtxp);
- Add a lock for protecting against msleep(bp, ...) wakeup(bp) races. - Create a new function bdone() which sets B_DONE and calls wakup(bp). This is suitable for use as b_iodone for buf consumers who are not going through the buf cache. - Create a new function bwait() which waits for the buf to be done at a set priority and with a specific wmesg. - Replace several cases where the above functionality was implemented without locking with the new functions.
2003-03-13 07:31:45 +00:00
while ((bp->b_flags & B_DONE) == 0)
- Reduce contention on the global bdonelock and bpinlock by using a pool mutex to protect these sleep/wakeup/counter races. This still is preferable to bloating each bio with a mtx.
2008-03-21 10:00:05 +00:00
msleep(bp, mtxp, pri, wchan, 0);
mtx_unlock(mtxp);
- Add a lock for protecting against msleep(bp, ...) wakeup(bp) races. - Create a new function bdone() which sets B_DONE and calls wakup(bp). This is suitable for use as b_iodone for buf consumers who are not going through the buf cache. - Create a new function bwait() which waits for the buf to be done at a set priority and with a specific wmesg. - Replace several cases where the above functionality was implemented without locking with the new functions.
2003-03-13 07:31:45 +00:00
}
Add BO_SYNC() and add a default which uses the secret vnode pointer and VOP_FSYNC() for now.
2005-01-11 10:43:08 +00:00
int
Remove the struct thread unuseful argument from bufobj interface. In particular following functions KPI results modified: - bufobj_invalbuf() - bufsync() and BO_SYNC() "virtual method" of the buffer objects set. Main consumers of bufobj functions are affected by this change too and, in particular, functions which changed their KPI are: - vinvalbuf() - g_vfs_close() Due to the KPI breakage, __FreeBSD_version will be bumped in a later commit. As a side note, please consider just temporary the 'curthread' argument passing to VOP_SYNC() (in bufsync()) as it will be axed out ASAP Reviewed by: kib Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
2008-10-10 21:23:50 +00:00
bufsync(struct bufobj *bo, int waitfor)
Add BO_SYNC() and add a default which uses the secret vnode pointer and VOP_FSYNC() for now.
2005-01-11 10:43:08 +00:00
{
Remove the struct thread unuseful argument from bufobj interface. In particular following functions KPI results modified: - bufobj_invalbuf() - bufsync() and BO_SYNC() "virtual method" of the buffer objects set. Main consumers of bufobj functions are affected by this change too and, in particular, functions which changed their KPI are: - vinvalbuf() - g_vfs_close() Due to the KPI breakage, __FreeBSD_version will be bumped in a later commit. As a side note, please consider just temporary the 'curthread' argument passing to VOP_SYNC() (in bufsync()) as it will be axed out ASAP Reviewed by: kib Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
2008-10-10 21:23:50 +00:00
return (VOP_FSYNC(bo->__bo_vnode, waitfor, curthread));
Add BO_SYNC() and add a default which uses the secret vnode pointer and VOP_FSYNC() for now.
2005-01-11 10:43:08 +00:00
}
Move the VI_BWAIT flag into no bo_flag element of bufobj and call it BO_WWAIT Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write count on a bufobj. Bufobj_wdrop() replaces vwakeup(). Use these functions all relevant places except in ffs_softdep.c where the use if interlocked_sleep() makes this impossible. Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
2004-10-21 15:53:54 +00:00
void
bufstrategy(struct bufobj *bo, struct buf *bp)
{
int i = 0;
struct vnode *vp;
vp = bp->b_vp;
Remove the last call in the system to VOP_SPECSTRATEGY(): We can no longer come through the VNODE layer to the disks since all the filesystems now go via geom_vfs to GEOM.
2004-10-29 10:52:31 +00:00
KASSERT(vp == bo->bo_private, ("Inconsistent vnode bufstrategy"));
Move the VI_BWAIT flag into no bo_flag element of bufobj and call it BO_WWAIT Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write count on a bufobj. Bufobj_wdrop() replaces vwakeup(). Use these functions all relevant places except in ffs_softdep.c where the use if interlocked_sleep() makes this impossible. Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
2004-10-21 15:53:54 +00:00
KASSERT(vp->v_type != VCHR && vp->v_type != VBLK,
("Wrong vnode in bufstrategy(bp=%p, vp=%p)", bp, vp));
Remove the last call in the system to VOP_SPECSTRATEGY(): We can no longer come through the VNODE layer to the disks since all the filesystems now go via geom_vfs to GEOM.
2004-10-29 10:52:31 +00:00
i = VOP_STRATEGY(vp, bp);
Move the VI_BWAIT flag into no bo_flag element of bufobj and call it BO_WWAIT Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write count on a bufobj. Bufobj_wdrop() replaces vwakeup(). Use these functions all relevant places except in ffs_softdep.c where the use if interlocked_sleep() makes this impossible. Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
2004-10-21 15:53:54 +00:00
KASSERT(i == 0, ("VOP_STRATEGY failed bp=%p vp=%p", bp, bp->b_vp));
}
- Add bufobj_wrefl() to add a write ref to a bufobj that is already locked.
2005-05-30 07:01:18 +00:00
void
bufobj_wrefl(struct bufobj *bo)
{
KASSERT(bo != NULL, ("NULL bo in bufobj_wref"));
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
ASSERT_BO_WLOCKED(bo);
- Add bufobj_wrefl() to add a write ref to a bufobj that is already locked.
2005-05-30 07:01:18 +00:00
bo->bo_numoutput++;
}
Move the VI_BWAIT flag into no bo_flag element of bufobj and call it BO_WWAIT Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write count on a bufobj. Bufobj_wdrop() replaces vwakeup(). Use these functions all relevant places except in ffs_softdep.c where the use if interlocked_sleep() makes this impossible. Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
2004-10-21 15:53:54 +00:00
void
bufobj_wref(struct bufobj *bo)
{
KASSERT(bo != NULL, ("NULL bo in bufobj_wref"));
BO_LOCK(bo);
bo->bo_numoutput++;
BO_UNLOCK(bo);
}
void
bufobj_wdrop(struct bufobj *bo)
{
KASSERT(bo != NULL, ("NULL bo in bufobj_wdrop"));
BO_LOCK(bo);
KASSERT(bo->bo_numoutput > 0, ("bufobj_wdrop non-positive count"));
if ((--bo->bo_numoutput == 0) && (bo->bo_flag & BO_WWAIT)) {
bo->bo_flag &= ~BO_WWAIT;
wakeup(&bo->bo_numoutput);
}
BO_UNLOCK(bo);
}
int
bufobj_wwait(struct bufobj *bo, int slpflag, int timeo)
{
int error;
KASSERT(bo != NULL, ("NULL bo in bufobj_wwait"));
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
ASSERT_BO_WLOCKED(bo);
Move the VI_BWAIT flag into no bo_flag element of bufobj and call it BO_WWAIT Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write count on a bufobj. Bufobj_wdrop() replaces vwakeup(). Use these functions all relevant places except in ffs_softdep.c where the use if interlocked_sleep() makes this impossible. Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
2004-10-21 15:53:54 +00:00
error = 0;
while (bo->bo_numoutput) {
bo->bo_flag |= BO_WWAIT;
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
error = msleep(&bo->bo_numoutput, BO_LOCKPTR(bo),
Move the VI_BWAIT flag into no bo_flag element of bufobj and call it BO_WWAIT Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write count on a bufobj. Bufobj_wdrop() replaces vwakeup(). Use these functions all relevant places except in ffs_softdep.c where the use if interlocked_sleep() makes this impossible. Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
2004-10-21 15:53:54 +00:00
slpflag | (PRIBIO + 1), "bo_wwait", timeo);
if (error)
break;
}
return (error);
}
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
void
bpin(struct buf *bp)
{
- Reduce contention on the global bdonelock and bpinlock by using a pool mutex to protect these sleep/wakeup/counter races. This still is preferable to bloating each bio with a mtx.
2008-03-21 10:00:05 +00:00
struct mtx *mtxp;
mtxp = mtx_pool_find(mtxpool_sleep, bp);
mtx_lock(mtxp);
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
bp->b_pin_count++;
- Reduce contention on the global bdonelock and bpinlock by using a pool mutex to protect these sleep/wakeup/counter races. This still is preferable to bloating each bio with a mtx.
2008-03-21 10:00:05 +00:00
mtx_unlock(mtxp);
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
}
void
bunpin(struct buf *bp)
{
- Reduce contention on the global bdonelock and bpinlock by using a pool mutex to protect these sleep/wakeup/counter races. This still is preferable to bloating each bio with a mtx.
2008-03-21 10:00:05 +00:00
struct mtx *mtxp;
mtxp = mtx_pool_find(mtxpool_sleep, bp);
mtx_lock(mtxp);
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
if (--bp->b_pin_count == 0)
wakeup(bp);
- Reduce contention on the global bdonelock and bpinlock by using a pool mutex to protect these sleep/wakeup/counter races. This still is preferable to bloating each bio with a mtx.
2008-03-21 10:00:05 +00:00
mtx_unlock(mtxp);
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
}
void
bunpin_wait(struct buf *bp)
{
- Reduce contention on the global bdonelock and bpinlock by using a pool mutex to protect these sleep/wakeup/counter races. This still is preferable to bloating each bio with a mtx.
2008-03-21 10:00:05 +00:00
struct mtx *mtxp;
mtxp = mtx_pool_find(mtxpool_sleep, bp);
mtx_lock(mtxp);
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
while (bp->b_pin_count > 0)
- Reduce contention on the global bdonelock and bpinlock by using a pool mutex to protect these sleep/wakeup/counter races. This still is preferable to bloating each bio with a mtx.
2008-03-21 10:00:05 +00:00
msleep(bp, mtxp, PRIBIO, "bwunpin", 0);
mtx_unlock(mtxp);
Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@
2005-12-07 03:39:08 +00:00
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
/*
* Set bio_data or bio_ma for struct bio from the struct buf.
*/
void
bdata2bio(struct buf *bp, struct bio *bip)
{
if ((bp->b_flags & B_UNMAPPED) != 0) {
KASSERT(unmapped_buf_allowed, ("unmapped"));
bip->bio_ma = bp->b_pages;
bip->bio_ma_n = bp->b_npages;
bip->bio_data = unmapped_buf;
bip->bio_ma_offset = (vm_offset_t)bp->b_offset & PAGE_MASK;
bip->bio_flags |= BIO_UNMAPPED;
KASSERT(round_page(bip->bio_ma_offset + bip->bio_length) /
PAGE_SIZE == bp->b_npages,
Make kassert_printf use __printflike. Fix associated errors/warnings while I'm here. Requested by: avg
2013-07-07 21:39:37 +00:00
("Buffer %p too short: %d %lld %d", bp, bip->bio_ma_offset,
(long long)bip->bio_length, bip->bio_ma_n));
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
} else {
bip->bio_data = bp->b_data;
bip->bio_ma = NULL;
}
}
Add a DDB command `show buffer', to display a struct buf. It's impossible to display everything, so i've chosen a small subset. Add more to this as you think seems useful.
1997-05-10 09:09:42 +00:00
#include "opt_ddb.h"
#ifdef DDB
#include <ddb/ddb.h>
Document all functions, global and static variables, and sysctls. Includes some minor whitespace changes, and re-ordering to be able to document properly (e.g, grouping of variables and the SYSCTL macro calls for them, where the documentation has been added.) Reviewed by: phk (but all errors are mine)
2002-03-05 15:38:49 +00:00
/* DDB command to show buffer data */
Add a DDB command `show buffer', to display a struct buf. It's impossible to display everything, so i've chosen a small subset. Add more to this as you think seems useful.
1997-05-10 09:09:42 +00:00
DB_SHOW_COMMAND(buffer, db_show_buffer)
{
/* get args */
struct buf *bp = (struct buf *)addr;
if (!have_addr) {
db_printf("usage: show buffer <addr>\n");
return;
}
- Add information about the buf lock to db_show_buffer. - Add a 'show lockedbufs' command that is similar to show lockedvnods. Sponsored by: Isilon Systems, Inc.
2005-03-25 00:20:37 +00:00
db_printf("buf at %p\n", bp);
Fix typo [1]. Use commas to separate flag printouts, in style with other parts of function. Submitted by: bf [1] MFC after: 1 week
2012-06-02 19:39:12 +00:00
db_printf("b_flags = 0x%b, b_xflags=0x%b, b_vflags=0x%b\n",
Update the print mask for decoding b_flags. Add print masks for b_vflags and b_xflags_t and print them as well. MFC after: 1 week
2012-06-02 18:44:40 +00:00
(u_int)bp->b_flags, PRINT_BUF_FLAGS, (u_int)bp->b_xflags,
PRINT_BUF_XFLAGS, (u_int)bp->b_vflags, PRINT_BUF_VFLAGS);
Fixed some printf format errors (hopefully all of the remaining daddr64_t ones for GENERIC, and all others on the same line as those). Reformat the printfs if necessary to avoid new long lones or old format printf errors.
2002-03-19 04:09:21 +00:00
db_printf(
"b_error = %d, b_bufsize = %ld, b_bcount = %ld, b_resid = %ld\n"
- When printing bufs with show buf the lblkno is often more useful than the blkno. Print them both.
2011-06-10 22:15:36 +00:00
"b_bufobj = (%p), b_data = %p, b_blkno = %jd, b_lblkno = %jd, "
"b_dep = %p\n",
Fixed some printf format errors (hopefully all of the remaining daddr64_t ones for GENERIC, and all others on the same line as those). Reformat the printfs if necessary to avoid new long lones or old format printf errors.
2002-03-19 04:09:21 +00:00
bp->b_error, bp->b_bufsize, bp->b_bcount, bp->b_resid,
Add the ffs structures introspection functions for ddb. Show the b_dep value for the buffer in the show buffer command. Add a comand to dump the dirty/clean buffer list for vnode. Reviewed by: tegge Tested and used by: pho MFC after: 1 month
2008-09-16 11:19:38 +00:00
bp->b_bufobj, bp->b_data, (intmax_t)bp->b_blkno,
- When printing bufs with show buf the lblkno is often more useful than the blkno. Print them both.
2011-06-10 22:15:36 +00:00
(intmax_t)bp->b_lblkno, bp->b_dep.lh_first);
Re-institute a bugfix in allocation of anonymous buffer memory.
1997-09-21 04:49:30 +00:00
if (bp->b_npages) {
int i;
db_printf("b_npages = %d, pages(OBJ, IDX, PA): ", bp->b_npages);
for (i = 0; i < bp->b_npages; i++) {
vm_page_t m;
m = bp->b_pages[i];
Fixed printf format errors.
1998-07-13 07:05:55 +00:00
db_printf("(%p, 0x%lx, 0x%lx)", (void *)m->object,
(u_long)m->pindex, (u_long)VM_PAGE_TO_PHYS(m));
Re-institute a bugfix in allocation of anonymous buffer memory.
1997-09-21 04:49:30 +00:00
if ((i + 1) < bp->b_npages)
db_printf(",");
}
db_printf("\n");
}
Tweak the output of VOP_PRINT/vn_printf() some. - Align the fifo output in fifo_print() with other vn_printf() output. - Remove the leading space from lockmgr_printinfo() so its output lines up in vn_printf(). - lockmgr_printinfo() now ends with a newline, so remove an extra newline from vn_printf().
2009-02-06 20:06:48 +00:00
db_printf(" ");
Improve the informations reported in case of busy buffers during the shutdown: - Axe out the SHOW_BUSYBUFS option and uses a tunable for selectively enable/disable it, which is defaulted for not printing anything (0 value) but can be changed for printing (1 value) and be verbose (2 value) - Improves the informations outputed: right now, there is no track of the actual struct buf object or vnode which are referenced by the shutdown process, but it is printed the related struct bufobj object which is not really helpful - Add more verbosity about the state of the struct buf lock and the vnode informations, with the latter to be activated separately by the sysctl Sponsored by: Sandvine Incorporated Reviewed by: emaste, kib Approved by: re (ksmith) MFC after: 10 days
2011-09-08 12:56:26 +00:00
BUF_LOCKPRINTINFO(bp);
Add a DDB command `show buffer', to display a struct buf. It's impossible to display everything, so i've chosen a small subset. Add more to this as you think seems useful.
1997-05-10 09:09:42 +00:00
}
- Add information about the buf lock to db_show_buffer. - Add a 'show lockedbufs' command that is similar to show lockedvnods. Sponsored by: Isilon Systems, Inc.
2005-03-25 00:20:37 +00:00
DB_SHOW_COMMAND(lockedbufs, lockedbufs)
{
struct buf *bp;
int i;
for (i = 0; i < nbuf; i++) {
bp = &buf[i];
- Introduce the function lockmgr_recursed() which returns true if the lockmgr lkp, when held in exclusive mode, is recursed - Introduce the function BUF_RECURSED() which does the same for bufobj locks based on the top of lockmgr_recursed() - Introduce the function BUF_ISLOCKED() which works like the counterpart VOP_ISLOCKED(9), showing the state of lockmgr linked with the bufobj BUF_RECURSED() and BUF_ISLOCKED() entirely replace the usage of bogus BUF_REFCNT() in a more explicative and SMP-compliant way. This allows us to axe out BUF_REFCNT() and leaving the function lockcount() totally unused in our stock kernel. Further commits will axe lockcount() as well as part of lockmgr() cleanup. KPI results, obviously, broken so further commits will update manpages and freebsd version. Tested by: kris (on UFS and NFS)
2008-01-19 17:36:23 +00:00
if (BUF_ISLOCKED(bp)) {
- Add information about the buf lock to db_show_buffer. - Add a 'show lockedbufs' command that is similar to show lockedvnods. Sponsored by: Isilon Systems, Inc.
2005-03-25 00:20:37 +00:00
db_show_buffer((uintptr_t)bp, 1, 0, NULL);
db_printf("\n");
}
}
}
Add the ffs structures introspection functions for ddb. Show the b_dep value for the buffer in the show buffer command. Add a comand to dump the dirty/clean buffer list for vnode. Reviewed by: tegge Tested and used by: pho MFC after: 1 month
2008-09-16 11:19:38 +00:00
DB_SHOW_COMMAND(vnodebufs, db_show_vnodebufs)
{
struct vnode *vp;
struct buf *bp;
if (!have_addr) {
db_printf("usage: show vnodebufs <addr>\n");
return;
}
vp = (struct vnode *)addr;
db_printf("Clean buffers:\n");
TAILQ_FOREACH(bp, &vp->v_bufobj.bo_clean.bv_hd, b_bobufs) {
db_show_buffer((uintptr_t)bp, 1, 0, NULL);
db_printf("\n");
}
db_printf("Dirty buffers:\n");
TAILQ_FOREACH(bp, &vp->v_bufobj.bo_dirty.bv_hd, b_bobufs) {
db_show_buffer((uintptr_t)bp, 1, 0, NULL);
db_printf("\n");
}
}
Add INVARIANTS checking that numfreebufs values are sane. Also add a per-buf flag to catch if a buf is double-counted in the free count. This code was useful to debug an instance where a local patch at Isilon was incorrectly managing numfreebufs for a new buf state. Reviewed by: jeff Approved by: zml (mentor)
2010-06-11 17:03:26 +00:00
DB_COMMAND(countfreebufs, db_coundfreebufs)
{
struct buf *bp;
int i, used = 0, nfree = 0;
if (have_addr) {
db_printf("usage: countfreebufs\n");
return;
}
for (i = 0; i < nbuf; i++) {
bp = &buf[i];
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
if ((bp->b_flags & B_INFREECNT) != 0)
Add INVARIANTS checking that numfreebufs values are sane. Also add a per-buf flag to catch if a buf is double-counted in the free count. This code was useful to debug an instance where a local patch at Isilon was incorrectly managing numfreebufs for a new buf state. Reviewed by: jeff Approved by: zml (mentor)
2010-06-11 17:03:26 +00:00
nfree++;
else
used++;
}
db_printf("Counted %d free, %d used (%d tot)\n", nfree, used,
nfree + used);
db_printf("numfreebuffers is %d\n", numfreebuffers);
}
Add a DDB command `show buffer', to display a struct buf. It's impossible to display everything, so i've chosen a small subset. Add more to this as you think seems useful.
1997-05-10 09:09:42 +00:00
#endif /* DDB */
Reference in New Issue Copy Permalink