freebsd-dev/sys/powerpc/include/intr_machdep.h

61 lines
2.2 KiB
C
Raw Normal View History

/*-
* Copyright (C) 2002 Benno Rice.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY Benno Rice ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _MACHINE_INTR_MACHDEP_H_
#define _MACHINE_INTR_MACHDEP_H_
#define INTR_VECTORS 256
Fix the interrupt code, broken 7 months ago. The interrupt framework already supported nested PICs, but was limited to having a nested AT-PIC only. With G5 support the need for nested OpenPIC controllers needed to be added. This was done the wrong way and broke the MPC8555 eval system in the process. OFW, as well as FDT, describe the interrupt routing in terms of a controller and an interrupt pin on it. This needs to be mapped to a flat and global resource: the IRQ. The IRQ is the same as the PCI intline and as such needs to be representable in 8 bits. Secondly, ISA support pretty much dictates that IRQ 0-15 should be reserved for ISA interrupts, because of the internal workins of south bridges. Both were broken. This change reverts revision 209298 for a big part and re-implements it simpler. In particular: o The id() method of the PIC I/F is removed again. It's not needed. o The openpic_attach() function has been changed to take the OFW or FDT phandle of the controller as a second argument. All bus attachments that previously used openpic_attach() as the attach method of the device I/F now implement as bus-specific method and pass the phandle_t to the renamed openpic_attach(). o Change powerpc_register_pic() to take a few more arguments. In particular: - Pass the number of IPIs specificly. The number of IRQs carved out for a PIC is the sum of the number of int. pins and IPIs. - Pass a flag indicating whether the PIC is an AT-PIC or not. This tells the interrupt framework whether to assign IRQ 0-15 or some other range. o Until we implement proper multi-pass bus enumeration, we have to handle the case where we need to map from PIC+pin to IRQ *before* the PIC gets registered. This is done in a similar way as before, but rather than carving out 256 IRQs per PIC, we carve out 128 IRQs (124 pins + 4 IPIs). This is supposed to handle the G5 case, but should really be fixed properly using multiple passes. o Have the interrupt framework set root_pic in most cases and not put that burden in PIC drivers (for the most part). o Remove powerpc_ign_lookup() and replace it with powerpc_get_irq(). Remove IGN_SHIFT, INTR_INTLINE and INTR_IGN. Related to the above, fix the Freescale PCI controller driver, broken by the FDT code. Besides not attaching properly, bus numbers were assigned improperly and enumeration was broken in general. This prevented the AT PIC from being discovered and interrupt routing to work properly. Consequently, the ata(4) controller stopped functioning. Fix the driver, and FDT PCI support, enough to get the MPC8555CDS going again. The FDT PCI code needs a whole lot more work. No breakages are expected, but lackiong G5 hardware, it's possible that there are unpleasant side-effects. At least MPC85xx support is back to where it was 7 months ago -- it's amazing how badly support can be broken in just 7 months... Sponsored by: Juniper Networks
2011-01-29 20:58:38 +00:00
#define MAX_PICS 5
#define MAP_IRQ(node, pin) powerpc_get_irq(node, pin)
/*
* Default base address for MSI messages on PowerPC
*/
#define MSI_INTEL_ADDR_BASE 0xfee00000
extern device_t root_pic;
struct trapframe;
driver_filter_t powerpc_ipi_handler;
void intrcnt_add(const char *name, u_long **countp);
Fix the interrupt code, broken 7 months ago. The interrupt framework already supported nested PICs, but was limited to having a nested AT-PIC only. With G5 support the need for nested OpenPIC controllers needed to be added. This was done the wrong way and broke the MPC8555 eval system in the process. OFW, as well as FDT, describe the interrupt routing in terms of a controller and an interrupt pin on it. This needs to be mapped to a flat and global resource: the IRQ. The IRQ is the same as the PCI intline and as such needs to be representable in 8 bits. Secondly, ISA support pretty much dictates that IRQ 0-15 should be reserved for ISA interrupts, because of the internal workins of south bridges. Both were broken. This change reverts revision 209298 for a big part and re-implements it simpler. In particular: o The id() method of the PIC I/F is removed again. It's not needed. o The openpic_attach() function has been changed to take the OFW or FDT phandle of the controller as a second argument. All bus attachments that previously used openpic_attach() as the attach method of the device I/F now implement as bus-specific method and pass the phandle_t to the renamed openpic_attach(). o Change powerpc_register_pic() to take a few more arguments. In particular: - Pass the number of IPIs specificly. The number of IRQs carved out for a PIC is the sum of the number of int. pins and IPIs. - Pass a flag indicating whether the PIC is an AT-PIC or not. This tells the interrupt framework whether to assign IRQ 0-15 or some other range. o Until we implement proper multi-pass bus enumeration, we have to handle the case where we need to map from PIC+pin to IRQ *before* the PIC gets registered. This is done in a similar way as before, but rather than carving out 256 IRQs per PIC, we carve out 128 IRQs (124 pins + 4 IPIs). This is supposed to handle the G5 case, but should really be fixed properly using multiple passes. o Have the interrupt framework set root_pic in most cases and not put that burden in PIC drivers (for the most part). o Remove powerpc_ign_lookup() and replace it with powerpc_get_irq(). Remove IGN_SHIFT, INTR_INTLINE and INTR_IGN. Related to the above, fix the Freescale PCI controller driver, broken by the FDT code. Besides not attaching properly, bus numbers were assigned improperly and enumeration was broken in general. This prevented the AT PIC from being discovered and interrupt routing to work properly. Consequently, the ata(4) controller stopped functioning. Fix the driver, and FDT PCI support, enough to get the MPC8555CDS going again. The FDT PCI code needs a whole lot more work. No breakages are expected, but lackiong G5 hardware, it's possible that there are unpleasant side-effects. At least MPC85xx support is back to where it was 7 months ago -- it's amazing how badly support can be broken in just 7 months... Sponsored by: Juniper Networks
2011-01-29 20:58:38 +00:00
void powerpc_register_pic(device_t, uint32_t, u_int, u_int, u_int);
u_int powerpc_get_irq(uint32_t, u_int);
void powerpc_dispatch_intr(u_int, struct trapframe *);
int powerpc_enable_intr(void);
int powerpc_setup_intr(const char *, u_int, driver_filter_t, driver_intr_t,
void *, enum intr_type, void **);
int powerpc_teardown_intr(void *);
int powerpc_bind_intr(u_int irq, u_char cpu);
int powerpc_config_intr(int, enum intr_trigger, enum intr_polarity);
#endif /* _MACHINE_INTR_MACHDEP_H_ */