d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
23da15d045
freebsd-dev/sys/mips/include/asm.h

712 lines
16 KiB
C
Raw Normal View History

FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* $NetBSD: asm.h,v 1.29 2000/12/14 21:29:51 jeffs Exp $ */
/*
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Ralph Campbell.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)machAsmDefs.h 8.1 (Berkeley) 6/10/93
* JNPR: asm.h,v 1.10 2007/08/09 11:23:32 katta
* $FreeBSD$
*/
/*
* machAsmDefs.h --
*
* Macros used when writing assembler programs.
*
* Copyright (C) 1989 Digital Equipment Corporation.
* Permission to use, copy, modify, and distribute this software and
* its documentation for any purpose and without fee is hereby granted,
* provided that the above copyright notice appears in all copies.
* Digital Equipment Corporation makes no representations about the
* suitability of this software for any purpose. It is provided "as is"
* without express or implied warranty.
*
* from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machAsmDefs.h,
* v 1.2 89/08/15 18:28:24 rab Exp SPRITE (DECWRL)
*/
#ifndef _MACHINE_ASM_H_
#define _MACHINE_ASM_H_
#include <machine/regdef.h>
#include <machine/endian.h>
Merge from projects/mips to head by hand: r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the BSP. Provide a missing prototype. r200343 | imp | 2009-12-09 18:44:11 -0700 (Wed, 09 Dec 2009) | 4 lines Get the sense of this right. We use uintpr_t for bus_addr_t when we're building everything except octeon && 32-bit. As note before, we need a clearner way, but at least now the hack is right. r199760 | imp | 2009-11-24 10:15:22 -0700 (Tue, 24 Nov 2009) | 2 lines Add in Cavium's CID. Report what the unknown CID is. r199754 | imp | 2009-11-24 09:32:31 -0700 (Tue, 24 Nov 2009) | 6 lines Include opt_cputype.h for all .c and .S files referencing TARGET_OCTEON. Spell ld script name right. r199599 | imp | 2009-11-20 09:32:26 -0700 (Fri, 20 Nov 2009) | 2 lines Another kludge for 64-bit bus_addr_t with 32-bit pointers... r199496 | gonzo | 2009-11-18 15:52:05 -0700 (Wed, 18 Nov 2009) | 5 lines - Add cpu_init_interrupts function that is supposed to prepeare stuff required for spinning out interrupts later - Add API for managing intrcnt/intrnames arrays - Some minor style(9) fixes r198958 | rrs | 2009-11-05 11:15:47 -0700 (Thu, 05 Nov 2009) | 2 lines For XLR adds extern for its bus space routines r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines With this commit our friend RMI will now compile. I have not tested it and the chances of it running yet are about ZERO.. but it will now compile. The hard part now begins, making it run ;-) r198666 | imp | 2009-10-29 18:37:50 -0600 (Thu, 29 Oct 2009) | 2 lines Add some newer MIPS CO cores. r198665 | imp | 2009-10-29 18:37:04 -0600 (Thu, 29 Oct 2009) | 4 lines db_expr_t is really closer to a register_t. Submitted by: bde@ r198531 | gonzo | 2009-10-27 18:01:20 -0600 (Tue, 27 Oct 2009) | 3 lines - Remove bunch of declared but not defined cach-related variables - Add mips_picache_linesize and mips_pdcache_linesize variables r198354 | neel | 2009-10-21 20:51:31 -0600 (Wed, 21 Oct 2009) | 9 lines Get rid of the hardcoded constants to define cacheable memory: SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE Instead we now keep a copy of the memory regions enumerated by platform-specific code and use that to determine whether an address is cacheable or not. r198310 | gonzo | 2009-10-20 17:13:08 -0600 (Tue, 20 Oct 2009) | 5 lines - Commit missing part of "bt" fix: store PC register in pcb_context struct in cpu_switch and use it in stack_trace function later. pcb_regs contains state of the process stored by exception handler and therefor is not valid for sleeping processes. r198207 | imp | 2009-10-18 08:57:04 -0600 (Sun, 18 Oct 2009) | 2 lines Undo spamage of last MFC. r198206 | imp | 2009-10-18 08:56:33 -0600 (Sun, 18 Oct 2009) | 3 lines _ALIGN has to return u_long, since pointers don't fit into u_int in 64-bit mips. r198182 | gonzo | 2009-10-16 18:22:07 -0600 (Fri, 16 Oct 2009) | 11 lines - Use PC/RA/SP values as arguments for stacktrace_subr instead of trapframe. Context info could be obtained from other sources (see below) no only from td_pcb field - Do not show a0..a3 values unless they're obtained from the stack. These are only confirmed values. - Fix bt command in DDB. Previous implementation used thread's trapframe structure as a source info for trace unwinding, but this structure is filled only when exception occurs. Valid register values for sleeping processes are in pcb_context array. For curthread use pc/sp/ra for current frame r198181 | gonzo | 2009-10-16 16:52:18 -0600 (Fri, 16 Oct 2009) | 2 lines - Get rid of label_t. It came from NetBSD and was used only in one place r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines Does 4 things: 1) Adds future RMI directories 2) Places intr_machdep.c in specfic files.arch pointing to the generic intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c (which we will need for RMI) in the machine specific directory 3) removes intr_machdep.c from files.mips 4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We may need to look at finding a better place to put this. But first I want to get this thing compiling. r198066 | gonzo | 2009-10-13 19:43:53 -0600 (Tue, 13 Oct 2009) | 5 lines - Move stack tracing function to db_trace.c - Axe unused extern MipsXXX declarations - Move all declarations for functions in exceptions.S/swtch.S from trap.c to respective headers r197685 | gonzo | 2009-10-01 14:05:36 -0600 (Thu, 01 Oct 2009) | 2 lines - Sync caches properly when dealing with sf_buf r196215 | imp | 2009-08-14 10:15:18 -0600 (Fri, 14 Aug 2009) | 6 lines (u_int) is the wrong type here. Use unsigned long instead, even though that's only less wrong... r196199 | imp | 2009-08-13 13:47:13 -0600 (Thu, 13 Aug 2009) | 7 lines Use unsigned long instead of unsigned for the integer casts here. The former works for both ILP32 and LP64 programming models, while the latter fails LP64. r196089 | gonzo | 2009-08-09 19:49:59 -0600 (Sun, 09 Aug 2009) | 4 lines - Make i/d cache size field 32-bit to prevent overflow Submited by: Neelkanth Natu r195582 | imp | 2009-07-10 13:07:07 -0600 (Fri, 10 Jul 2009) | 2 lines fix prototype for MipsEmulateBranch. r195581 | imp | 2009-07-10 13:06:43 -0600 (Fri, 10 Jul 2009) | 2 lines Better definitions for a few types for n32/n64. r195580 | imp | 2009-07-10 13:06:15 -0600 (Fri, 10 Jul 2009) | 5 lines Fixed aligned macros... r195478 | gonzo | 2009-07-08 16:28:36 -0600 (Wed, 08 Jul 2009) | 5 lines - Port busdma code from FreeBSD/arm. This is more mature version that takes into account all limitation to DMA memory (boundaries, alignment) and implements bounce pages. - Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf r195440 | imp | 2009-07-08 00:01:37 -0600 (Wed, 08 Jul 2009) | 2 lines Fix atomic_store_64 prototype for 64-bit systems. r195392 | imp | 2009-07-05 20:27:03 -0600 (Sun, 05 Jul 2009) | 3 lines The MCOUNT macro isn't going to work in 64-bit mode. Add a note to this effect. r195391 | imp | 2009-07-05 20:22:51 -0600 (Sun, 05 Jul 2009) | 3 lines Provide a macro for PTR_ADDU as well. We may need to implement this differently for N32... Use PTR_ADDU in DO_AST macro. r195390 | imp | 2009-07-05 20:22:06 -0600 (Sun, 05 Jul 2009) | 4 lines Change the addu here to daddu. addu paranoina prodded by: jmallet@ r195382 | imp | 2009-07-05 15:16:26 -0600 (Sun, 05 Jul 2009) | 5 lines addu and subu are special. We need to use daddu and dsubu here to get proper behavior. Submitted by: jmallet@ r195370 | imp | 2009-07-05 09:20:16 -0600 (Sun, 05 Jul 2009) | 6 lines The SB1 has cohernet memory, so add it. Also, Maxmem is better as a long. Submitted by: Neelkanth Natu r195369 | imp | 2009-07-05 09:19:28 -0600 (Sun, 05 Jul 2009) | 4 lines The SB1 needs a special value for the cache field of the pte. Submitted by: Neelkanth Natu r195368 | imp | 2009-07-05 09:18:06 -0600 (Sun, 05 Jul 2009) | 2 lines compute the areas to save registers in for 64-bit access correctly. r195367 | imp | 2009-07-05 09:17:11 -0600 (Sun, 05 Jul 2009) | 3 lines First cut at 64-bit types. not 100% sure these are all correct for N32 ABI. r195366 | imp | 2009-07-05 09:16:27 -0600 (Sun, 05 Jul 2009) | 3 lines Trim unreferenced goo. SDRAM likely should be next, but it is still referenced. r195365 | imp | 2009-07-05 09:13:24 -0600 (Sun, 05 Jul 2009) | 9 lines First cut at atomics for 64-bit machines and SMP machines. # Note: Cavium provided a port that has atomics similar to these, but # that does a syncw; sync; atomic; sync; syncw where we just do the classic # mips 'atomic' operation (eg ll; frob; sc). It is unclear to me why # the extra is needed. Since my initial target is one core, I'll defer # investigation until I bring up multiple cores. syncw is an octeon specific # instruction. r195359 | imp | 2009-07-05 02:14:00 -0600 (Sun, 05 Jul 2009) | 4 lines Bring in cdefs.h from NetBSD to define ABI goo. Obtained from: NetBSD r195358 | imp | 2009-07-05 02:13:19 -0600 (Sun, 05 Jul 2009) | 4 lines Pull in machine/cdefs.h for the ABI definitions. Provide a PTR_LA, ala sgi, and use it in preference to a bare 'la' so that it gets translated to a 'dla' for the 64-bit pointer ABIs. r195357 | imp | 2009-07-05 01:01:34 -0600 (Sun, 05 Jul 2009) | 2 lines Use uintptr_t rather than unsigned here for 64-bit correctness. r195356 | imp | 2009-07-05 01:00:51 -0600 (Sun, 05 Jul 2009) | 6 lines Define __ELF_WORD_SIZE appropriately for n64. Note for N32 I believe this is correct. While registers are 64-bit, n32 is a 32-bit ABI and lives in a 32-bit world (with explicit 64-bit registers, however). Change an 8, which was 4 + 4 or sizeof(int) + SZREG to be a simple '4 + SZREG' to reflect the actual offset of the structure in question. r195355 | imp | 2009-07-05 00:56:51 -0600 (Sun, 05 Jul 2009) | 7 lines (1) Use uintptr_t in preference to unsigned. The latter isn't right for 64-bit case, while the former is. (2) include a SB1 specific coherency mapping Submitted by: Neelkanth Nath (2) r195352 | imp | 2009-07-05 00:44:37 -0600 (Sun, 05 Jul 2009) | 3 lines db_expr_t should be a intptr_t, not an int. These expressions can be addresses or numbers, and that's a intptr_t if I ever saw one. r195351 | imp | 2009-07-05 00:43:01 -0600 (Sun, 05 Jul 2009) | 4 lines Define COP0_SYNC for SB1 CPU. Submitted by: Neelkanth Natu r195350 | imp | 2009-07-05 00:39:37 -0600 (Sun, 05 Jul 2009) | 7 lines Switch to ABI agnostic ta0-ta3. Provide defs for this in the right places. Provide n32/n64 register name defintions. This should have no effect for the O32 builds that everybody else uses, but should help make N64 builds possible (lots of other changes are needed for that). Obtained from: NetBSD (for the regdef.h changes) r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines - Add support for handling TLS area address in kernel space. From the userland point of view get/set operations are performed using sysarch(2) call. r195076 | gonzo | 2009-06-26 13:54:06 -0600 (Fri, 26 Jun 2009) | 2 lines - Add guards to ensure that these files are included only once r194469 | gonzo | 2009-06-18 22:43:49 -0600 (Thu, 18 Jun 2009) | 16 lines - Mark temp variable as "earlyclobber" in assembler inline in atomic_fetchadd_32. Without it gcc would use it as input register for v and sometimes generate following code for function call like atomic_fetchadd_32(&(fp)->f_count, -1): 801238b4: 2402ffff li v0,-1 801238b8: c2230018 ll v1,24(s1) 801238bc: 00431021 addu v0,v0,v1 801238c0: e2220018 sc v0,24(s1) 801238c4: 1040fffc beqz v0,801238b8 <dupfdopen+0x2e8> 801238c8: 00000000 nop Which is definitly wrong because if sc fails v0 is set to 0 and previous value of -1 is overriden hence whole operation turns to bogus r194164 | imp | 2009-06-14 00:14:25 -0600 (Sun, 14 Jun 2009) | 3 lines bye bye. This is no longer referenced, but much code from it will resurface for a bus-space implementation. r194160 | imp | 2009-06-14 00:10:36 -0600 (Sun, 14 Jun 2009) | 3 lines Cavium-specific goo is no longer necessary here. Of course, I now have to write a bus space for cavium, but that shouldn't be too hard. r194157 | imp | 2009-06-14 00:01:46 -0600 (Sun, 14 Jun 2009) | 2 lines Move this to a more approrpiate plae. r194156 | imp | 2009-06-13 23:29:13 -0600 (Sat, 13 Jun 2009) | 2 lines Bring this in from the cavium port. r193487 | gonzo | 2009-06-05 02:37:11 -0600 (Fri, 05 Jun 2009) | 2 lines - Use restoreintr instead of enableint while accessing pcpu in DO_AST r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines - Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default we assume that there is no FPU, because majority of SoC does not have it. r192817 | gonzo | 2009-05-26 10:35:05 -0600 (Tue, 26 May 2009) | 2 lines - Add type cast for atomic_cmpset_acq_ptr arguments r192792 | gonzo | 2009-05-26 00:01:17 -0600 (Tue, 26 May 2009) | 2 lines - Remove now unused NetBSDism intr.h r192177 | gonzo | 2009-05-15 20:39:13 -0600 (Fri, 15 May 2009) | 4 lines - Add MIPS_IS_KSEG0_ADDR, MIPS_IS_KSEG1_ADDR and MIPS_IS_VALID_PTR macroses thet check if address belongs to KSEG0, KSEG1 or both of them respectively. r191589 | gonzo | 2009-04-27 13:18:55 -0600 (Mon, 27 Apr 2009) | 3 lines - Cast argument to proper type in order to avoid warnings like "shift value is too large for given type" r191577 | gonzo | 2009-04-27 12:29:59 -0600 (Mon, 27 Apr 2009) | 4 lines - Use naming convention the same as MIPS spec does: eliminate _sel1 sufix and just use selector number. e.g. mips_rd_config_sel1 -> mips_rd_config1 - Add WatchHi/WatchLo accessors for selctors 1..3 (for debug purposes) r191451 | gonzo | 2009-04-23 22:17:21 -0600 (Thu, 23 Apr 2009) | 4 lines - Define accessor functions for CP0 Config(16) register selects 1, 2, 3. Content of these registers is defined in MIPS spec and can be used for obtaining info about CPU capabilities. r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines - Make mips_bus_space_generic be of type bus_space_tag_t instead of struct bus_space and update all relevant places. r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines Use FreeBSD/arm approach for handling bus space access: space tag is a pointer to bus_space structure that defines access methods and hence every bus can define own accessors. Default space is mips_bus_space_generic. It's a simple interface to physical memory, values are read with regard to host system byte order.
2010-01-10 19:50:24 +00:00
#include <machine/cdefs.h>
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#undef __FBSDID
#if !defined(lint) && !defined(STRIP_FBSDID)
#define __FBSDID(s) .ident s
#else
#define __FBSDID(s) /* nothing */
#endif
/*
* Define -pg profile entry code.
* Must always be noreorder, must never use a macro instruction
* Final addiu to t9 must always equal the size of this _KERN_MCOUNT
*/
#define _KERN_MCOUNT \
.set push; \
.set noreorder; \
.set noat; \
subu sp,sp,16; \
sw t9,12(sp); \
move AT,ra; \
lui t9,%hi(_mcount); \
addiu t9,t9,%lo(_mcount); \
jalr t9; \
nop; \
lw t9,4(sp); \
addiu sp,sp,8; \
addiu t9,t9,40; \
.set pop;
#ifdef GPROF
#define MCOUNT _KERN_MCOUNT
#else
#define MCOUNT
#endif
#define _C_LABEL(x) x
#ifdef USE_AENT
#define AENT(x) \
.aent x, 0
#else
#define AENT(x)
#endif
/*
* WARN_REFERENCES: create a warning if the specified symbol is referenced
*/
#define WARN_REFERENCES(_sym,_msg) \
.section .gnu.warning. ## _sym ; .ascii _msg ; .text
#ifdef __ELF__
# define _C_LABEL(x) x
#else
# define _C_LABEL(x) _ ## x
#endif
/*
* WEAK_ALIAS: create a weak alias.
*/
#define WEAK_ALIAS(alias,sym) \
.weak alias; \
alias = sym
/*
* STRONG_ALIAS: create a strong alias.
*/
#define STRONG_ALIAS(alias,sym) \
.globl alias; \
alias = sym
#define GLOBAL(sym) \
.globl sym; sym:
#define ENTRY(sym) \
.text; .globl sym; .ent sym; sym:
#define ASM_ENTRY(sym) \
.text; .globl sym; .type sym,@function; sym:
/*
* LEAF
* A leaf routine does
* - call no other function,
* - never use any register that callee-saved (S0-S8), and
* - not use any local stack storage.
*/
#define LEAF(x) \
.globl _C_LABEL(x); \
.ent _C_LABEL(x), 0; \
_C_LABEL(x): ; \
.frame sp, 0, ra; \
MCOUNT
/*
* LEAF_NOPROFILE
* No profilable leaf routine.
*/
#define LEAF_NOPROFILE(x) \
.globl _C_LABEL(x); \
.ent _C_LABEL(x), 0; \
_C_LABEL(x): ; \
.frame sp, 0, ra
/*
* XLEAF
* declare alternate entry to leaf routine
*/
#define XLEAF(x) \
.globl _C_LABEL(x); \
AENT (_C_LABEL(x)); \
_C_LABEL(x):
/*
* NESTED
* A function calls other functions and needs
* therefore stack space to save/restore registers.
*/
#define NESTED(x, fsize, retpc) \
.globl _C_LABEL(x); \
.ent _C_LABEL(x), 0; \
_C_LABEL(x): ; \
.frame sp, fsize, retpc; \
MCOUNT
/*
* NESTED_NOPROFILE(x)
* No profilable nested routine.
*/
#define NESTED_NOPROFILE(x, fsize, retpc) \
.globl _C_LABEL(x); \
.ent _C_LABEL(x), 0; \
_C_LABEL(x): ; \
.frame sp, fsize, retpc
/*
* XNESTED
* declare alternate entry point to nested routine.
*/
#define XNESTED(x) \
.globl _C_LABEL(x); \
AENT (_C_LABEL(x)); \
_C_LABEL(x):
/*
* END
* Mark end of a procedure.
*/
#define END(x) \
.end _C_LABEL(x)
/*
* IMPORT -- import external symbol
*/
#define IMPORT(sym, size) \
.extern _C_LABEL(sym),size
/*
* EXPORT -- export definition of symbol
*/
#define EXPORT(x) \
.globl _C_LABEL(x); \
_C_LABEL(x):
/*
* VECTOR
* exception vector entrypoint
* XXX: regmask should be used to generate .mask
*/
#define VECTOR(x, regmask) \
.ent _C_LABEL(x),0; \
EXPORT(x); \
#define VECTOR_END(x) \
EXPORT(x ## End); \
END(x)
/*
* Macros to panic and printf from assembly language.
*/
#define PANIC(msg) \
Merge from projects/mips to head by hand: r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the BSP. Provide a missing prototype. r200343 | imp | 2009-12-09 18:44:11 -0700 (Wed, 09 Dec 2009) | 4 lines Get the sense of this right. We use uintpr_t for bus_addr_t when we're building everything except octeon && 32-bit. As note before, we need a clearner way, but at least now the hack is right. r199760 | imp | 2009-11-24 10:15:22 -0700 (Tue, 24 Nov 2009) | 2 lines Add in Cavium's CID. Report what the unknown CID is. r199754 | imp | 2009-11-24 09:32:31 -0700 (Tue, 24 Nov 2009) | 6 lines Include opt_cputype.h for all .c and .S files referencing TARGET_OCTEON. Spell ld script name right. r199599 | imp | 2009-11-20 09:32:26 -0700 (Fri, 20 Nov 2009) | 2 lines Another kludge for 64-bit bus_addr_t with 32-bit pointers... r199496 | gonzo | 2009-11-18 15:52:05 -0700 (Wed, 18 Nov 2009) | 5 lines - Add cpu_init_interrupts function that is supposed to prepeare stuff required for spinning out interrupts later - Add API for managing intrcnt/intrnames arrays - Some minor style(9) fixes r198958 | rrs | 2009-11-05 11:15:47 -0700 (Thu, 05 Nov 2009) | 2 lines For XLR adds extern for its bus space routines r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines With this commit our friend RMI will now compile. I have not tested it and the chances of it running yet are about ZERO.. but it will now compile. The hard part now begins, making it run ;-) r198666 | imp | 2009-10-29 18:37:50 -0600 (Thu, 29 Oct 2009) | 2 lines Add some newer MIPS CO cores. r198665 | imp | 2009-10-29 18:37:04 -0600 (Thu, 29 Oct 2009) | 4 lines db_expr_t is really closer to a register_t. Submitted by: bde@ r198531 | gonzo | 2009-10-27 18:01:20 -0600 (Tue, 27 Oct 2009) | 3 lines - Remove bunch of declared but not defined cach-related variables - Add mips_picache_linesize and mips_pdcache_linesize variables r198354 | neel | 2009-10-21 20:51:31 -0600 (Wed, 21 Oct 2009) | 9 lines Get rid of the hardcoded constants to define cacheable memory: SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE Instead we now keep a copy of the memory regions enumerated by platform-specific code and use that to determine whether an address is cacheable or not. r198310 | gonzo | 2009-10-20 17:13:08 -0600 (Tue, 20 Oct 2009) | 5 lines - Commit missing part of "bt" fix: store PC register in pcb_context struct in cpu_switch and use it in stack_trace function later. pcb_regs contains state of the process stored by exception handler and therefor is not valid for sleeping processes. r198207 | imp | 2009-10-18 08:57:04 -0600 (Sun, 18 Oct 2009) | 2 lines Undo spamage of last MFC. r198206 | imp | 2009-10-18 08:56:33 -0600 (Sun, 18 Oct 2009) | 3 lines _ALIGN has to return u_long, since pointers don't fit into u_int in 64-bit mips. r198182 | gonzo | 2009-10-16 18:22:07 -0600 (Fri, 16 Oct 2009) | 11 lines - Use PC/RA/SP values as arguments for stacktrace_subr instead of trapframe. Context info could be obtained from other sources (see below) no only from td_pcb field - Do not show a0..a3 values unless they're obtained from the stack. These are only confirmed values. - Fix bt command in DDB. Previous implementation used thread's trapframe structure as a source info for trace unwinding, but this structure is filled only when exception occurs. Valid register values for sleeping processes are in pcb_context array. For curthread use pc/sp/ra for current frame r198181 | gonzo | 2009-10-16 16:52:18 -0600 (Fri, 16 Oct 2009) | 2 lines - Get rid of label_t. It came from NetBSD and was used only in one place r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines Does 4 things: 1) Adds future RMI directories 2) Places intr_machdep.c in specfic files.arch pointing to the generic intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c (which we will need for RMI) in the machine specific directory 3) removes intr_machdep.c from files.mips 4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We may need to look at finding a better place to put this. But first I want to get this thing compiling. r198066 | gonzo | 2009-10-13 19:43:53 -0600 (Tue, 13 Oct 2009) | 5 lines - Move stack tracing function to db_trace.c - Axe unused extern MipsXXX declarations - Move all declarations for functions in exceptions.S/swtch.S from trap.c to respective headers r197685 | gonzo | 2009-10-01 14:05:36 -0600 (Thu, 01 Oct 2009) | 2 lines - Sync caches properly when dealing with sf_buf r196215 | imp | 2009-08-14 10:15:18 -0600 (Fri, 14 Aug 2009) | 6 lines (u_int) is the wrong type here. Use unsigned long instead, even though that's only less wrong... r196199 | imp | 2009-08-13 13:47:13 -0600 (Thu, 13 Aug 2009) | 7 lines Use unsigned long instead of unsigned for the integer casts here. The former works for both ILP32 and LP64 programming models, while the latter fails LP64. r196089 | gonzo | 2009-08-09 19:49:59 -0600 (Sun, 09 Aug 2009) | 4 lines - Make i/d cache size field 32-bit to prevent overflow Submited by: Neelkanth Natu r195582 | imp | 2009-07-10 13:07:07 -0600 (Fri, 10 Jul 2009) | 2 lines fix prototype for MipsEmulateBranch. r195581 | imp | 2009-07-10 13:06:43 -0600 (Fri, 10 Jul 2009) | 2 lines Better definitions for a few types for n32/n64. r195580 | imp | 2009-07-10 13:06:15 -0600 (Fri, 10 Jul 2009) | 5 lines Fixed aligned macros... r195478 | gonzo | 2009-07-08 16:28:36 -0600 (Wed, 08 Jul 2009) | 5 lines - Port busdma code from FreeBSD/arm. This is more mature version that takes into account all limitation to DMA memory (boundaries, alignment) and implements bounce pages. - Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf r195440 | imp | 2009-07-08 00:01:37 -0600 (Wed, 08 Jul 2009) | 2 lines Fix atomic_store_64 prototype for 64-bit systems. r195392 | imp | 2009-07-05 20:27:03 -0600 (Sun, 05 Jul 2009) | 3 lines The MCOUNT macro isn't going to work in 64-bit mode. Add a note to this effect. r195391 | imp | 2009-07-05 20:22:51 -0600 (Sun, 05 Jul 2009) | 3 lines Provide a macro for PTR_ADDU as well. We may need to implement this differently for N32... Use PTR_ADDU in DO_AST macro. r195390 | imp | 2009-07-05 20:22:06 -0600 (Sun, 05 Jul 2009) | 4 lines Change the addu here to daddu. addu paranoina prodded by: jmallet@ r195382 | imp | 2009-07-05 15:16:26 -0600 (Sun, 05 Jul 2009) | 5 lines addu and subu are special. We need to use daddu and dsubu here to get proper behavior. Submitted by: jmallet@ r195370 | imp | 2009-07-05 09:20:16 -0600 (Sun, 05 Jul 2009) | 6 lines The SB1 has cohernet memory, so add it. Also, Maxmem is better as a long. Submitted by: Neelkanth Natu r195369 | imp | 2009-07-05 09:19:28 -0600 (Sun, 05 Jul 2009) | 4 lines The SB1 needs a special value for the cache field of the pte. Submitted by: Neelkanth Natu r195368 | imp | 2009-07-05 09:18:06 -0600 (Sun, 05 Jul 2009) | 2 lines compute the areas to save registers in for 64-bit access correctly. r195367 | imp | 2009-07-05 09:17:11 -0600 (Sun, 05 Jul 2009) | 3 lines First cut at 64-bit types. not 100% sure these are all correct for N32 ABI. r195366 | imp | 2009-07-05 09:16:27 -0600 (Sun, 05 Jul 2009) | 3 lines Trim unreferenced goo. SDRAM likely should be next, but it is still referenced. r195365 | imp | 2009-07-05 09:13:24 -0600 (Sun, 05 Jul 2009) | 9 lines First cut at atomics for 64-bit machines and SMP machines. # Note: Cavium provided a port that has atomics similar to these, but # that does a syncw; sync; atomic; sync; syncw where we just do the classic # mips 'atomic' operation (eg ll; frob; sc). It is unclear to me why # the extra is needed. Since my initial target is one core, I'll defer # investigation until I bring up multiple cores. syncw is an octeon specific # instruction. r195359 | imp | 2009-07-05 02:14:00 -0600 (Sun, 05 Jul 2009) | 4 lines Bring in cdefs.h from NetBSD to define ABI goo. Obtained from: NetBSD r195358 | imp | 2009-07-05 02:13:19 -0600 (Sun, 05 Jul 2009) | 4 lines Pull in machine/cdefs.h for the ABI definitions. Provide a PTR_LA, ala sgi, and use it in preference to a bare 'la' so that it gets translated to a 'dla' for the 64-bit pointer ABIs. r195357 | imp | 2009-07-05 01:01:34 -0600 (Sun, 05 Jul 2009) | 2 lines Use uintptr_t rather than unsigned here for 64-bit correctness. r195356 | imp | 2009-07-05 01:00:51 -0600 (Sun, 05 Jul 2009) | 6 lines Define __ELF_WORD_SIZE appropriately for n64. Note for N32 I believe this is correct. While registers are 64-bit, n32 is a 32-bit ABI and lives in a 32-bit world (with explicit 64-bit registers, however). Change an 8, which was 4 + 4 or sizeof(int) + SZREG to be a simple '4 + SZREG' to reflect the actual offset of the structure in question. r195355 | imp | 2009-07-05 00:56:51 -0600 (Sun, 05 Jul 2009) | 7 lines (1) Use uintptr_t in preference to unsigned. The latter isn't right for 64-bit case, while the former is. (2) include a SB1 specific coherency mapping Submitted by: Neelkanth Nath (2) r195352 | imp | 2009-07-05 00:44:37 -0600 (Sun, 05 Jul 2009) | 3 lines db_expr_t should be a intptr_t, not an int. These expressions can be addresses or numbers, and that's a intptr_t if I ever saw one. r195351 | imp | 2009-07-05 00:43:01 -0600 (Sun, 05 Jul 2009) | 4 lines Define COP0_SYNC for SB1 CPU. Submitted by: Neelkanth Natu r195350 | imp | 2009-07-05 00:39:37 -0600 (Sun, 05 Jul 2009) | 7 lines Switch to ABI agnostic ta0-ta3. Provide defs for this in the right places. Provide n32/n64 register name defintions. This should have no effect for the O32 builds that everybody else uses, but should help make N64 builds possible (lots of other changes are needed for that). Obtained from: NetBSD (for the regdef.h changes) r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines - Add support for handling TLS area address in kernel space. From the userland point of view get/set operations are performed using sysarch(2) call. r195076 | gonzo | 2009-06-26 13:54:06 -0600 (Fri, 26 Jun 2009) | 2 lines - Add guards to ensure that these files are included only once r194469 | gonzo | 2009-06-18 22:43:49 -0600 (Thu, 18 Jun 2009) | 16 lines - Mark temp variable as "earlyclobber" in assembler inline in atomic_fetchadd_32. Without it gcc would use it as input register for v and sometimes generate following code for function call like atomic_fetchadd_32(&(fp)->f_count, -1): 801238b4: 2402ffff li v0,-1 801238b8: c2230018 ll v1,24(s1) 801238bc: 00431021 addu v0,v0,v1 801238c0: e2220018 sc v0,24(s1) 801238c4: 1040fffc beqz v0,801238b8 <dupfdopen+0x2e8> 801238c8: 00000000 nop Which is definitly wrong because if sc fails v0 is set to 0 and previous value of -1 is overriden hence whole operation turns to bogus r194164 | imp | 2009-06-14 00:14:25 -0600 (Sun, 14 Jun 2009) | 3 lines bye bye. This is no longer referenced, but much code from it will resurface for a bus-space implementation. r194160 | imp | 2009-06-14 00:10:36 -0600 (Sun, 14 Jun 2009) | 3 lines Cavium-specific goo is no longer necessary here. Of course, I now have to write a bus space for cavium, but that shouldn't be too hard. r194157 | imp | 2009-06-14 00:01:46 -0600 (Sun, 14 Jun 2009) | 2 lines Move this to a more approrpiate plae. r194156 | imp | 2009-06-13 23:29:13 -0600 (Sat, 13 Jun 2009) | 2 lines Bring this in from the cavium port. r193487 | gonzo | 2009-06-05 02:37:11 -0600 (Fri, 05 Jun 2009) | 2 lines - Use restoreintr instead of enableint while accessing pcpu in DO_AST r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines - Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default we assume that there is no FPU, because majority of SoC does not have it. r192817 | gonzo | 2009-05-26 10:35:05 -0600 (Tue, 26 May 2009) | 2 lines - Add type cast for atomic_cmpset_acq_ptr arguments r192792 | gonzo | 2009-05-26 00:01:17 -0600 (Tue, 26 May 2009) | 2 lines - Remove now unused NetBSDism intr.h r192177 | gonzo | 2009-05-15 20:39:13 -0600 (Fri, 15 May 2009) | 4 lines - Add MIPS_IS_KSEG0_ADDR, MIPS_IS_KSEG1_ADDR and MIPS_IS_VALID_PTR macroses thet check if address belongs to KSEG0, KSEG1 or both of them respectively. r191589 | gonzo | 2009-04-27 13:18:55 -0600 (Mon, 27 Apr 2009) | 3 lines - Cast argument to proper type in order to avoid warnings like "shift value is too large for given type" r191577 | gonzo | 2009-04-27 12:29:59 -0600 (Mon, 27 Apr 2009) | 4 lines - Use naming convention the same as MIPS spec does: eliminate _sel1 sufix and just use selector number. e.g. mips_rd_config_sel1 -> mips_rd_config1 - Add WatchHi/WatchLo accessors for selctors 1..3 (for debug purposes) r191451 | gonzo | 2009-04-23 22:17:21 -0600 (Thu, 23 Apr 2009) | 4 lines - Define accessor functions for CP0 Config(16) register selects 1, 2, 3. Content of these registers is defined in MIPS spec and can be used for obtaining info about CPU capabilities. r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines - Make mips_bus_space_generic be of type bus_space_tag_t instead of struct bus_space and update all relevant places. r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines Use FreeBSD/arm approach for handling bus space access: space tag is a pointer to bus_space structure that defines access methods and hence every bus can define own accessors. Default space is mips_bus_space_generic. It's a simple interface to physical memory, values are read with regard to host system byte order.
2010-01-10 19:50:24 +00:00
PTR_LA a0, 9f; \
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
jal _C_LABEL(panic); \
nop; \
MSG(msg)
#define PANIC_KSEG0(msg, reg) PANIC(msg)
#define PRINTF(msg) \
Merge from projects/mips to head by hand: r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the BSP. Provide a missing prototype. r200343 | imp | 2009-12-09 18:44:11 -0700 (Wed, 09 Dec 2009) | 4 lines Get the sense of this right. We use uintpr_t for bus_addr_t when we're building everything except octeon && 32-bit. As note before, we need a clearner way, but at least now the hack is right. r199760 | imp | 2009-11-24 10:15:22 -0700 (Tue, 24 Nov 2009) | 2 lines Add in Cavium's CID. Report what the unknown CID is. r199754 | imp | 2009-11-24 09:32:31 -0700 (Tue, 24 Nov 2009) | 6 lines Include opt_cputype.h for all .c and .S files referencing TARGET_OCTEON. Spell ld script name right. r199599 | imp | 2009-11-20 09:32:26 -0700 (Fri, 20 Nov 2009) | 2 lines Another kludge for 64-bit bus_addr_t with 32-bit pointers... r199496 | gonzo | 2009-11-18 15:52:05 -0700 (Wed, 18 Nov 2009) | 5 lines - Add cpu_init_interrupts function that is supposed to prepeare stuff required for spinning out interrupts later - Add API for managing intrcnt/intrnames arrays - Some minor style(9) fixes r198958 | rrs | 2009-11-05 11:15:47 -0700 (Thu, 05 Nov 2009) | 2 lines For XLR adds extern for its bus space routines r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines With this commit our friend RMI will now compile. I have not tested it and the chances of it running yet are about ZERO.. but it will now compile. The hard part now begins, making it run ;-) r198666 | imp | 2009-10-29 18:37:50 -0600 (Thu, 29 Oct 2009) | 2 lines Add some newer MIPS CO cores. r198665 | imp | 2009-10-29 18:37:04 -0600 (Thu, 29 Oct 2009) | 4 lines db_expr_t is really closer to a register_t. Submitted by: bde@ r198531 | gonzo | 2009-10-27 18:01:20 -0600 (Tue, 27 Oct 2009) | 3 lines - Remove bunch of declared but not defined cach-related variables - Add mips_picache_linesize and mips_pdcache_linesize variables r198354 | neel | 2009-10-21 20:51:31 -0600 (Wed, 21 Oct 2009) | 9 lines Get rid of the hardcoded constants to define cacheable memory: SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE Instead we now keep a copy of the memory regions enumerated by platform-specific code and use that to determine whether an address is cacheable or not. r198310 | gonzo | 2009-10-20 17:13:08 -0600 (Tue, 20 Oct 2009) | 5 lines - Commit missing part of "bt" fix: store PC register in pcb_context struct in cpu_switch and use it in stack_trace function later. pcb_regs contains state of the process stored by exception handler and therefor is not valid for sleeping processes. r198207 | imp | 2009-10-18 08:57:04 -0600 (Sun, 18 Oct 2009) | 2 lines Undo spamage of last MFC. r198206 | imp | 2009-10-18 08:56:33 -0600 (Sun, 18 Oct 2009) | 3 lines _ALIGN has to return u_long, since pointers don't fit into u_int in 64-bit mips. r198182 | gonzo | 2009-10-16 18:22:07 -0600 (Fri, 16 Oct 2009) | 11 lines - Use PC/RA/SP values as arguments for stacktrace_subr instead of trapframe. Context info could be obtained from other sources (see below) no only from td_pcb field - Do not show a0..a3 values unless they're obtained from the stack. These are only confirmed values. - Fix bt command in DDB. Previous implementation used thread's trapframe structure as a source info for trace unwinding, but this structure is filled only when exception occurs. Valid register values for sleeping processes are in pcb_context array. For curthread use pc/sp/ra for current frame r198181 | gonzo | 2009-10-16 16:52:18 -0600 (Fri, 16 Oct 2009) | 2 lines - Get rid of label_t. It came from NetBSD and was used only in one place r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines Does 4 things: 1) Adds future RMI directories 2) Places intr_machdep.c in specfic files.arch pointing to the generic intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c (which we will need for RMI) in the machine specific directory 3) removes intr_machdep.c from files.mips 4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We may need to look at finding a better place to put this. But first I want to get this thing compiling. r198066 | gonzo | 2009-10-13 19:43:53 -0600 (Tue, 13 Oct 2009) | 5 lines - Move stack tracing function to db_trace.c - Axe unused extern MipsXXX declarations - Move all declarations for functions in exceptions.S/swtch.S from trap.c to respective headers r197685 | gonzo | 2009-10-01 14:05:36 -0600 (Thu, 01 Oct 2009) | 2 lines - Sync caches properly when dealing with sf_buf r196215 | imp | 2009-08-14 10:15:18 -0600 (Fri, 14 Aug 2009) | 6 lines (u_int) is the wrong type here. Use unsigned long instead, even though that's only less wrong... r196199 | imp | 2009-08-13 13:47:13 -0600 (Thu, 13 Aug 2009) | 7 lines Use unsigned long instead of unsigned for the integer casts here. The former works for both ILP32 and LP64 programming models, while the latter fails LP64. r196089 | gonzo | 2009-08-09 19:49:59 -0600 (Sun, 09 Aug 2009) | 4 lines - Make i/d cache size field 32-bit to prevent overflow Submited by: Neelkanth Natu r195582 | imp | 2009-07-10 13:07:07 -0600 (Fri, 10 Jul 2009) | 2 lines fix prototype for MipsEmulateBranch. r195581 | imp | 2009-07-10 13:06:43 -0600 (Fri, 10 Jul 2009) | 2 lines Better definitions for a few types for n32/n64. r195580 | imp | 2009-07-10 13:06:15 -0600 (Fri, 10 Jul 2009) | 5 lines Fixed aligned macros... r195478 | gonzo | 2009-07-08 16:28:36 -0600 (Wed, 08 Jul 2009) | 5 lines - Port busdma code from FreeBSD/arm. This is more mature version that takes into account all limitation to DMA memory (boundaries, alignment) and implements bounce pages. - Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf r195440 | imp | 2009-07-08 00:01:37 -0600 (Wed, 08 Jul 2009) | 2 lines Fix atomic_store_64 prototype for 64-bit systems. r195392 | imp | 2009-07-05 20:27:03 -0600 (Sun, 05 Jul 2009) | 3 lines The MCOUNT macro isn't going to work in 64-bit mode. Add a note to this effect. r195391 | imp | 2009-07-05 20:22:51 -0600 (Sun, 05 Jul 2009) | 3 lines Provide a macro for PTR_ADDU as well. We may need to implement this differently for N32... Use PTR_ADDU in DO_AST macro. r195390 | imp | 2009-07-05 20:22:06 -0600 (Sun, 05 Jul 2009) | 4 lines Change the addu here to daddu. addu paranoina prodded by: jmallet@ r195382 | imp | 2009-07-05 15:16:26 -0600 (Sun, 05 Jul 2009) | 5 lines addu and subu are special. We need to use daddu and dsubu here to get proper behavior. Submitted by: jmallet@ r195370 | imp | 2009-07-05 09:20:16 -0600 (Sun, 05 Jul 2009) | 6 lines The SB1 has cohernet memory, so add it. Also, Maxmem is better as a long. Submitted by: Neelkanth Natu r195369 | imp | 2009-07-05 09:19:28 -0600 (Sun, 05 Jul 2009) | 4 lines The SB1 needs a special value for the cache field of the pte. Submitted by: Neelkanth Natu r195368 | imp | 2009-07-05 09:18:06 -0600 (Sun, 05 Jul 2009) | 2 lines compute the areas to save registers in for 64-bit access correctly. r195367 | imp | 2009-07-05 09:17:11 -0600 (Sun, 05 Jul 2009) | 3 lines First cut at 64-bit types. not 100% sure these are all correct for N32 ABI. r195366 | imp | 2009-07-05 09:16:27 -0600 (Sun, 05 Jul 2009) | 3 lines Trim unreferenced goo. SDRAM likely should be next, but it is still referenced. r195365 | imp | 2009-07-05 09:13:24 -0600 (Sun, 05 Jul 2009) | 9 lines First cut at atomics for 64-bit machines and SMP machines. # Note: Cavium provided a port that has atomics similar to these, but # that does a syncw; sync; atomic; sync; syncw where we just do the classic # mips 'atomic' operation (eg ll; frob; sc). It is unclear to me why # the extra is needed. Since my initial target is one core, I'll defer # investigation until I bring up multiple cores. syncw is an octeon specific # instruction. r195359 | imp | 2009-07-05 02:14:00 -0600 (Sun, 05 Jul 2009) | 4 lines Bring in cdefs.h from NetBSD to define ABI goo. Obtained from: NetBSD r195358 | imp | 2009-07-05 02:13:19 -0600 (Sun, 05 Jul 2009) | 4 lines Pull in machine/cdefs.h for the ABI definitions. Provide a PTR_LA, ala sgi, and use it in preference to a bare 'la' so that it gets translated to a 'dla' for the 64-bit pointer ABIs. r195357 | imp | 2009-07-05 01:01:34 -0600 (Sun, 05 Jul 2009) | 2 lines Use uintptr_t rather than unsigned here for 64-bit correctness. r195356 | imp | 2009-07-05 01:00:51 -0600 (Sun, 05 Jul 2009) | 6 lines Define __ELF_WORD_SIZE appropriately for n64. Note for N32 I believe this is correct. While registers are 64-bit, n32 is a 32-bit ABI and lives in a 32-bit world (with explicit 64-bit registers, however). Change an 8, which was 4 + 4 or sizeof(int) + SZREG to be a simple '4 + SZREG' to reflect the actual offset of the structure in question. r195355 | imp | 2009-07-05 00:56:51 -0600 (Sun, 05 Jul 2009) | 7 lines (1) Use uintptr_t in preference to unsigned. The latter isn't right for 64-bit case, while the former is. (2) include a SB1 specific coherency mapping Submitted by: Neelkanth Nath (2) r195352 | imp | 2009-07-05 00:44:37 -0600 (Sun, 05 Jul 2009) | 3 lines db_expr_t should be a intptr_t, not an int. These expressions can be addresses or numbers, and that's a intptr_t if I ever saw one. r195351 | imp | 2009-07-05 00:43:01 -0600 (Sun, 05 Jul 2009) | 4 lines Define COP0_SYNC for SB1 CPU. Submitted by: Neelkanth Natu r195350 | imp | 2009-07-05 00:39:37 -0600 (Sun, 05 Jul 2009) | 7 lines Switch to ABI agnostic ta0-ta3. Provide defs for this in the right places. Provide n32/n64 register name defintions. This should have no effect for the O32 builds that everybody else uses, but should help make N64 builds possible (lots of other changes are needed for that). Obtained from: NetBSD (for the regdef.h changes) r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines - Add support for handling TLS area address in kernel space. From the userland point of view get/set operations are performed using sysarch(2) call. r195076 | gonzo | 2009-06-26 13:54:06 -0600 (Fri, 26 Jun 2009) | 2 lines - Add guards to ensure that these files are included only once r194469 | gonzo | 2009-06-18 22:43:49 -0600 (Thu, 18 Jun 2009) | 16 lines - Mark temp variable as "earlyclobber" in assembler inline in atomic_fetchadd_32. Without it gcc would use it as input register for v and sometimes generate following code for function call like atomic_fetchadd_32(&(fp)->f_count, -1): 801238b4: 2402ffff li v0,-1 801238b8: c2230018 ll v1,24(s1) 801238bc: 00431021 addu v0,v0,v1 801238c0: e2220018 sc v0,24(s1) 801238c4: 1040fffc beqz v0,801238b8 <dupfdopen+0x2e8> 801238c8: 00000000 nop Which is definitly wrong because if sc fails v0 is set to 0 and previous value of -1 is overriden hence whole operation turns to bogus r194164 | imp | 2009-06-14 00:14:25 -0600 (Sun, 14 Jun 2009) | 3 lines bye bye. This is no longer referenced, but much code from it will resurface for a bus-space implementation. r194160 | imp | 2009-06-14 00:10:36 -0600 (Sun, 14 Jun 2009) | 3 lines Cavium-specific goo is no longer necessary here. Of course, I now have to write a bus space for cavium, but that shouldn't be too hard. r194157 | imp | 2009-06-14 00:01:46 -0600 (Sun, 14 Jun 2009) | 2 lines Move this to a more approrpiate plae. r194156 | imp | 2009-06-13 23:29:13 -0600 (Sat, 13 Jun 2009) | 2 lines Bring this in from the cavium port. r193487 | gonzo | 2009-06-05 02:37:11 -0600 (Fri, 05 Jun 2009) | 2 lines - Use restoreintr instead of enableint while accessing pcpu in DO_AST r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines - Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default we assume that there is no FPU, because majority of SoC does not have it. r192817 | gonzo | 2009-05-26 10:35:05 -0600 (Tue, 26 May 2009) | 2 lines - Add type cast for atomic_cmpset_acq_ptr arguments r192792 | gonzo | 2009-05-26 00:01:17 -0600 (Tue, 26 May 2009) | 2 lines - Remove now unused NetBSDism intr.h r192177 | gonzo | 2009-05-15 20:39:13 -0600 (Fri, 15 May 2009) | 4 lines - Add MIPS_IS_KSEG0_ADDR, MIPS_IS_KSEG1_ADDR and MIPS_IS_VALID_PTR macroses thet check if address belongs to KSEG0, KSEG1 or both of them respectively. r191589 | gonzo | 2009-04-27 13:18:55 -0600 (Mon, 27 Apr 2009) | 3 lines - Cast argument to proper type in order to avoid warnings like "shift value is too large for given type" r191577 | gonzo | 2009-04-27 12:29:59 -0600 (Mon, 27 Apr 2009) | 4 lines - Use naming convention the same as MIPS spec does: eliminate _sel1 sufix and just use selector number. e.g. mips_rd_config_sel1 -> mips_rd_config1 - Add WatchHi/WatchLo accessors for selctors 1..3 (for debug purposes) r191451 | gonzo | 2009-04-23 22:17:21 -0600 (Thu, 23 Apr 2009) | 4 lines - Define accessor functions for CP0 Config(16) register selects 1, 2, 3. Content of these registers is defined in MIPS spec and can be used for obtaining info about CPU capabilities. r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines - Make mips_bus_space_generic be of type bus_space_tag_t instead of struct bus_space and update all relevant places. r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines Use FreeBSD/arm approach for handling bus space access: space tag is a pointer to bus_space structure that defines access methods and hence every bus can define own accessors. Default space is mips_bus_space_generic. It's a simple interface to physical memory, values are read with regard to host system byte order.
2010-01-10 19:50:24 +00:00
PTR_LA a0, 9f; \
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
jal _C_LABEL(printf); \
nop; \
MSG(msg)
#define MSG(msg) \
.rdata; \
9: .asciiz msg; \
.text
#define ASMSTR(str) \
.asciiz str; \
.align 3
Update macros for multiple ABI support from NetBSD. Also update SZREG define in ucontext
2010-03-02 07:27:30 +00:00
#if defined(__mips_o32)
#define SZREG 4
#else
#define SZREG 8
#endif
#if defined(__mips_o32) || defined(__mips_o64)
#define ALSK 7 /* stack alignment */
#define ALMASK -7 /* stack alignment */
#define SZFPREG 4
#define FP_L lwc1
#define FP_S swc1
#else
#define ALSK 15 /* stack alignment */
#define ALMASK -15 /* stack alignment */
#define SZFPREG 8
#define FP_L ldc1
#define FP_S sdc1
#endif
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* standard callframe {
Update macros for multiple ABI support from NetBSD. Also update SZREG define in ucontext
2010-03-02 07:27:30 +00:00
* register_t cf_pad[N]; o32/64 (N=0), n32 (N=1) n64 (N=1)
* register_t cf_args[4]; arg0 - arg3 (only on o32 and o64)
* register_t cf_gp; global pointer (only on n32 and n64)
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
* register_t cf_sp; frame pointer
* register_t cf_ra; return address
* };
*/
Update macros for multiple ABI support from NetBSD. Also update SZREG define in ucontext
2010-03-02 07:27:30 +00:00
#if defined(__mips_o32) || defined(__mips_o64)
#define CALLFRAME_SIZ (SZREG * (4 + 2))
#define CALLFRAME_S0 0
#elif defined(__mips_n32) || defined(__mips_n64)
#define CALLFRAME_SIZ (SZREG * 4)
#define CALLFRAME_S0 (CALLFRAME_SIZ - 4 * SZREG)
#endif
#ifndef _KERNEL
#define CALLFRAME_GP (CALLFRAME_SIZ - 3 * SZREG)
#endif
#define CALLFRAME_SP (CALLFRAME_SIZ - 2 * SZREG)
#define CALLFRAME_RA (CALLFRAME_SIZ - 1 * SZREG)
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
o) Use inline functions to access coprocessor 0 registers rather than external ones implemented using assembly. o) Use TRAPF_USERMODE() consistently rather than USERMODE(). Eliminate <machine/psl.h> as a result. o) Use intr_*() rather than *intr(), consistently. o) Use register_t instead of u_int in some trap code. o) Merge some more endian-related macros to machine/asm.h from NetBSD. o) Add PTR_LI macro, which loads an address with the correct sign-extension for a pointer. o) Restore interrupts when bailing out due to an excessive IRQ in nexus_setup_intr(). o) Remove unused functions from psraccess.S. o) Enter temporary virtual entries for large memory access into the page tables rather than simply hoping they stay resident in the TLB and we don't need to do a refill for them. o) Abstract out large memory mapping setup/teardown using some macros. o) Do mips_dcache_wbinv_range() when using temporary virtual addresses just like we do when we can use the direct map.
2010-04-17 01:17:31 +00:00
/*
* Endian-independent assembly-code aliases for unaligned memory accesses.
*/
#if _BYTE_ORDER == _LITTLE_ENDIAN
# define LWHI lwr
# define LWLO lwl
# define SWHI swr
# define SWLO swl
# if SZREG == 4
# define REG_LHI lwr
# define REG_LLO lwl
# define REG_SHI swr
# define REG_SLO swl
# else
# define REG_LHI ldr
# define REG_LLO ldl
# define REG_SHI sdr
# define REG_SLO sdl
# endif
#endif
#if _BYTE_ORDER == _BIG_ENDIAN
# define LWHI lwl
# define LWLO lwr
# define SWHI swl
# define SWLO swr
# if SZREG == 4
# define REG_LHI lwl
# define REG_LLO lwr
# define REG_SHI swl
# define REG_SLO swr
# else
# define REG_LHI ldl
# define REG_LLO ldr
# define REG_SHI sdl
# define REG_SLO sdr
# endif
#endif
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* While it would be nice to be compatible with the SGI
* REG_L and REG_S macros, because they do not take parameters, it
* is impossible to use them with the _MIPS_SIM_ABIX32 model.
*
* These macros hide the use of mips3 instructions from the
* assembler to prevent the assembler from generating 64-bit style
* ABI calls.
*/
Update macros for multiple ABI support from NetBSD. Also update SZREG define in ucontext
2010-03-02 07:27:30 +00:00
#if _MIPS_SZPTR == 32
#define PTR_ADD add
#define PTR_ADDI addi
#define PTR_ADDU addu
#define PTR_ADDIU addiu
#define PTR_SUB add
#define PTR_SUBI subi
#define PTR_SUBU subu
#define PTR_SUBIU subu
#define PTR_L lw
#define PTR_LA la
o) Use inline functions to access coprocessor 0 registers rather than external ones implemented using assembly. o) Use TRAPF_USERMODE() consistently rather than USERMODE(). Eliminate <machine/psl.h> as a result. o) Use intr_*() rather than *intr(), consistently. o) Use register_t instead of u_int in some trap code. o) Merge some more endian-related macros to machine/asm.h from NetBSD. o) Add PTR_LI macro, which loads an address with the correct sign-extension for a pointer. o) Restore interrupts when bailing out due to an excessive IRQ in nexus_setup_intr(). o) Remove unused functions from psraccess.S. o) Enter temporary virtual entries for large memory access into the page tables rather than simply hoping they stay resident in the TLB and we don't need to do a refill for them. o) Abstract out large memory mapping setup/teardown using some macros. o) Do mips_dcache_wbinv_range() when using temporary virtual addresses just like we do when we can use the direct map.
2010-04-17 01:17:31 +00:00
#define PTR_LI li
Update macros for multiple ABI support from NetBSD. Also update SZREG define in ucontext
2010-03-02 07:27:30 +00:00
#define PTR_S sw
#define PTR_SLL sll
#define PTR_SLLV sllv
#define PTR_SRL srl
#define PTR_SRLV srlv
#define PTR_SRA sra
#define PTR_SRAV srav
#define PTR_LL ll
#define PTR_SC sc
#define PTR_WORD .word
#define PTR_SCALESHIFT 2
#else /* _MIPS_SZPTR == 64 */
#define PTR_ADD dadd
#define PTR_ADDI daddi
#define PTR_ADDU daddu
#define PTR_ADDIU daddiu
#define PTR_SUB dadd
#define PTR_SUBI dsubi
#define PTR_SUBU dsubu
#define PTR_SUBIU dsubu
#define PTR_L ld
#define PTR_LA dla
o) Use inline functions to access coprocessor 0 registers rather than external ones implemented using assembly. o) Use TRAPF_USERMODE() consistently rather than USERMODE(). Eliminate <machine/psl.h> as a result. o) Use intr_*() rather than *intr(), consistently. o) Use register_t instead of u_int in some trap code. o) Merge some more endian-related macros to machine/asm.h from NetBSD. o) Add PTR_LI macro, which loads an address with the correct sign-extension for a pointer. o) Restore interrupts when bailing out due to an excessive IRQ in nexus_setup_intr(). o) Remove unused functions from psraccess.S. o) Enter temporary virtual entries for large memory access into the page tables rather than simply hoping they stay resident in the TLB and we don't need to do a refill for them. o) Abstract out large memory mapping setup/teardown using some macros. o) Do mips_dcache_wbinv_range() when using temporary virtual addresses just like we do when we can use the direct map.
2010-04-17 01:17:31 +00:00
#define PTR_LI dli
Update macros for multiple ABI support from NetBSD. Also update SZREG define in ucontext
2010-03-02 07:27:30 +00:00
#define PTR_S sd
#define PTR_SLL dsll
#define PTR_SLLV dsllv
#define PTR_SRL dsrl
#define PTR_SRLV dsrlv
#define PTR_SRA dsra
#define PTR_SRAV dsrav
#define PTR_LL lld
#define PTR_SC scd
#define PTR_WORD .dword
#define PTR_SCALESHIFT 3
#endif /* _MIPS_SZPTR == 64 */
#if _MIPS_SZINT == 32
#define INT_ADD add
#define INT_ADDI addi
#define INT_ADDU addu
#define INT_ADDIU addiu
#define INT_SUB add
#define INT_SUBI subi
#define INT_SUBU subu
#define INT_SUBIU subu
#define INT_L lw
#define INT_LA la
#define INT_S sw
#define INT_SLL sll
#define INT_SLLV sllv
#define INT_SRL srl
#define INT_SRLV srlv
#define INT_SRA sra
#define INT_SRAV srav
#define INT_LL ll
#define INT_SC sc
#define INT_WORD .word
#define INT_SCALESHIFT 2
#else
#define INT_ADD dadd
#define INT_ADDI daddi
#define INT_ADDU daddu
#define INT_ADDIU daddiu
#define INT_SUB dadd
#define INT_SUBI dsubi
#define INT_SUBU dsubu
#define INT_SUBIU dsubu
#define INT_L ld
#define INT_LA dla
#define INT_S sd
#define INT_SLL dsll
#define INT_SLLV dsllv
#define INT_SRL dsrl
#define INT_SRLV dsrlv
#define INT_SRA dsra
#define INT_SRAV dsrav
#define INT_LL lld
#define INT_SC scd
#define INT_WORD .dword
#define INT_SCALESHIFT 3
#endif
#if _MIPS_SZLONG == 32
#define LONG_ADD add
#define LONG_ADDI addi
#define LONG_ADDU addu
#define LONG_ADDIU addiu
#define LONG_SUB add
#define LONG_SUBI subi
#define LONG_SUBU subu
#define LONG_SUBIU subu
#define LONG_L lw
#define LONG_LA la
#define LONG_S sw
#define LONG_SLL sll
#define LONG_SLLV sllv
#define LONG_SRL srl
#define LONG_SRLV srlv
#define LONG_SRA sra
#define LONG_SRAV srav
#define LONG_LL ll
#define LONG_SC sc
#define LONG_WORD .word
#define LONG_SCALESHIFT 2
#else
#define LONG_ADD dadd
#define LONG_ADDI daddi
#define LONG_ADDU daddu
#define LONG_ADDIU daddiu
#define LONG_SUB dadd
#define LONG_SUBI dsubi
#define LONG_SUBU dsubu
#define LONG_SUBIU dsubu
#define LONG_L ld
#define LONG_LA dla
#define LONG_S sd
#define LONG_SLL dsll
#define LONG_SLLV dsllv
#define LONG_SRL dsrl
#define LONG_SRLV dsrlv
#define LONG_SRA dsra
#define LONG_SRAV dsrav
#define LONG_LL lld
#define LONG_SC scd
#define LONG_WORD .dword
#define LONG_SCALESHIFT 3
#endif
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
Update macros for multiple ABI support from NetBSD. Also update SZREG define in ucontext
2010-03-02 07:27:30 +00:00
#if SZREG == 4
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#define REG_L lw
#define REG_S sw
#define REG_LI li
Update macros for multiple ABI support from NetBSD. Also update SZREG define in ucontext
2010-03-02 07:27:30 +00:00
#define REG_ADDU addu
#define REG_SLL sll
#define REG_SLLV sllv
#define REG_SRL srl
#define REG_SRLV srlv
#define REG_SRA sra
#define REG_SRAV srav
#define REG_LL ll
#define REG_SC sc
#define REG_SCALESHIFT 2
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#else
#define REG_L ld
#define REG_S sd
#define REG_LI dli
Update macros for multiple ABI support from NetBSD. Also update SZREG define in ucontext
2010-03-02 07:27:30 +00:00
#define REG_ADDU daddu
#define REG_SLL dsll
#define REG_SLLV dsllv
#define REG_SRL dsrl
#define REG_SRLV dsrlv
#define REG_SRA dsra
#define REG_SRAV dsrav
#define REG_LL lld
#define REG_SC scd
#define REG_SCALESHIFT 3
#endif
#if _MIPS_ISA == _MIPS_ISA_MIPS1 || _MIPS_ISA == _MIPS_ISA_MIPS2 || \
_MIPS_ISA == _MIPS_ISA_MIPS32
#define MFC0 mfc0
#define MTC0 mtc0
#endif
#if _MIPS_ISA == _MIPS_ISA_MIPS3 || _MIPS_ISA == _MIPS_ISA_MIPS4 || \
_MIPS_ISA == _MIPS_ISA_MIPS64
#define MFC0 dmfc0
#define MTC0 dmtc0
#endif
#if defined(__mips_o32) || defined(__mips_o64)
#ifdef __ABICALLS__
#define CPRESTORE(r) .cprestore r
#define CPLOAD(r) .cpload r
#else
#define CPRESTORE(r) /* not needed */
#define CPLOAD(r) /* not needed */
#endif
#define SETUP_GP \
.set push; \
.set noreorder; \
.cpload t9; \
.set pop
#define SETUP_GPX(r) \
.set push; \
.set noreorder; \
move r,ra; /* save old ra */ \
bal 7f; \
nop; \
7: .cpload ra; \
move ra,r; \
.set pop
#define SETUP_GPX_L(r,lbl) \
.set push; \
.set noreorder; \
move r,ra; /* save old ra */ \
bal lbl; \
nop; \
lbl: .cpload ra; \
move ra,r; \
.set pop
#define SAVE_GP(x) .cprestore x
#define SETUP_GP64(a,b) /* n32/n64 specific */
#define SETUP_GP64_R(a,b) /* n32/n64 specific */
#define SETUP_GPX64(a,b) /* n32/n64 specific */
#define SETUP_GPX64_L(a,b,c) /* n32/n64 specific */
#define RESTORE_GP64 /* n32/n64 specific */
#define USE_ALT_CP(a) /* n32/n64 specific */
#endif /* __mips_o32 || __mips_o64 */
#if defined(__mips_o32) || defined(__mips_o64)
#define REG_PROLOGUE .set push
#define REG_EPILOGUE .set pop
#endif
#if defined(__mips_n32) || defined(__mips_n64)
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#define REG_PROLOGUE .set push ; .set mips3
#define REG_EPILOGUE .set pop
Update macros for multiple ABI support from NetBSD. Also update SZREG define in ucontext
2010-03-02 07:27:30 +00:00
#endif
#if defined(__mips_n32) || defined(__mips_n64)
#define SETUP_GP /* o32 specific */
#define SETUP_GPX(r) /* o32 specific */
#define SETUP_GPX_L(r,lbl) /* o32 specific */
#define SAVE_GP(x) /* o32 specific */
#define SETUP_GP64(a,b) .cpsetup $25, a, b
#define SETUP_GPX64(a,b) \
.set push; \
move b,ra; \
.set noreorder; \
bal 7f; \
nop; \
7: .set pop; \
.cpsetup ra, a, 7b; \
move ra,b
#define SETUP_GPX64_L(a,b,c) \
.set push; \
move b,ra; \
.set noreorder; \
bal c; \
nop; \
c: .set pop; \
.cpsetup ra, a, c; \
move ra,b
#define RESTORE_GP64 .cpreturn
#define USE_ALT_CP(a) .cplocal a
#endif /* __mips_n32 || __mips_n64 */
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#define GET_CPU_PCPU(reg) \
o) Use inline functions to access coprocessor 0 registers rather than external ones implemented using assembly. o) Use TRAPF_USERMODE() consistently rather than USERMODE(). Eliminate <machine/psl.h> as a result. o) Use intr_*() rather than *intr(), consistently. o) Use register_t instead of u_int in some trap code. o) Merge some more endian-related macros to machine/asm.h from NetBSD. o) Add PTR_LI macro, which loads an address with the correct sign-extension for a pointer. o) Restore interrupts when bailing out due to an excessive IRQ in nexus_setup_intr(). o) Remove unused functions from psraccess.S. o) Enter temporary virtual entries for large memory access into the page tables rather than simply hoping they stay resident in the TLB and we don't need to do a refill for them. o) Abstract out large memory mapping setup/teardown using some macros. o) Do mips_dcache_wbinv_range() when using temporary virtual addresses just like we do when we can use the direct map.
2010-04-17 01:17:31 +00:00
PTR_L reg, _C_LABEL(pcpup);
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* Description of the setjmp buffer
*
* word 0 magic number (dependant on creator)
* 1 RA
* 2 S0
* 3 S1
* 4 S2
* 5 S3
* 6 S4
* 7 S5
* 8 S6
* 9 S7
* 10 SP
* 11 S8
Merge jmallett@'s n64 work into HEAD - changeset 7 Initial support for n32 and n64 ABIs from http://svn.freebsd.org/base/user/jmallett/octeon Changes are: - syscall, exception and trap support for n32/n64 ABIs - 64-bit address space defines - _jmp_buf for n32/n64 - casts between registers and ptr/int updated to work on n32/n64 Approved by: rrs(mentor), jmallett
2010-06-24 08:08:43 +00:00
* 12 GP (dependent on ABI)
* 13 signal mask (dependant on magic)
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
* 14 (con't)
* 15 (con't)
Merge jmallett@'s n64 work into HEAD - changeset 7 Initial support for n32 and n64 ABIs from http://svn.freebsd.org/base/user/jmallett/octeon Changes are: - syscall, exception and trap support for n32/n64 ABIs - 64-bit address space defines - _jmp_buf for n32/n64 - casts between registers and ptr/int updated to work on n32/n64 Approved by: rrs(mentor), jmallett
2010-06-24 08:08:43 +00:00
* 16 (con't)
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
*
* The magic number number identifies the jmp_buf and
* how the buffer was created as well as providing
* a sanity check
*
*/
#define _JB_MAGIC__SETJMP 0xBADFACED
#define _JB_MAGIC_SETJMP 0xFACEDBAD
/* Valid for all jmp_buf's */
#define _JB_MAGIC 0
#define _JB_REG_RA 1
#define _JB_REG_S0 2
#define _JB_REG_S1 3
#define _JB_REG_S2 4
#define _JB_REG_S3 5
#define _JB_REG_S4 6
#define _JB_REG_S5 7
#define _JB_REG_S6 8
#define _JB_REG_S7 9
#define _JB_REG_SP 10
#define _JB_REG_S8 11
Merge jmallett@'s n64 work into HEAD - changeset 7 Initial support for n32 and n64 ABIs from http://svn.freebsd.org/base/user/jmallett/octeon Changes are: - syscall, exception and trap support for n32/n64 ABIs - 64-bit address space defines - _jmp_buf for n32/n64 - casts between registers and ptr/int updated to work on n32/n64 Approved by: rrs(mentor), jmallett
2010-06-24 08:08:43 +00:00
#if defined(__mips_n32) || defined(__mips_n64)
#define _JB_REG_GP 12
#endif
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* Only valid with the _JB_MAGIC_SETJMP magic */
Merge jmallett@'s n64 work into HEAD - changeset 7 Initial support for n32 and n64 ABIs from http://svn.freebsd.org/base/user/jmallett/octeon Changes are: - syscall, exception and trap support for n32/n64 ABIs - 64-bit address space defines - _jmp_buf for n32/n64 - casts between registers and ptr/int updated to work on n32/n64 Approved by: rrs(mentor), jmallett
2010-06-24 08:08:43 +00:00
#define _JB_SIGMASK 13
Shift saved floating point registers up in jmp_buf. sigmask_t is 128-bits so requires two slots. Approved by: CheriBSD (93699cb9b6e73980ac369e379cea9772c9494ccc) MFC after: 1 week Sponsored by: DARPA, AFRL
2016-01-20 22:23:08 +00:00
#define __JB_SIGMASK_REMAINDER 14 /* sigmask_t is 128-bits */
#define _JB_FPREG_F20 15
#define _JB_FPREG_F21 16
#define _JB_FPREG_F22 17
#define _JB_FPREG_F23 18
#define _JB_FPREG_F24 19
#define _JB_FPREG_F25 20
#define _JB_FPREG_F26 21
#define _JB_FPREG_F27 22
#define _JB_FPREG_F28 23
#define _JB_FPREG_F29 24
#define _JB_FPREG_F30 25
#define _JB_FPREG_F31 26
#define _JB_FPREG_FCSR 27
Add FPU support for MIPS setjmp(3)/longjmp(3). This change saves/restores the callee-saved MIPS floating point registers as documented by the o32/n32/n64 spec ("MIPSpro N32 ABI Handbook", Table 2-1) for the _setjmp(3), _longjmp(3), setjmp(3) and longjmp(3) C library functions. This is only included when the C library is built with hardware floating point support (or when "SOFTFLOAT" is not defined). Submitted by: sson MFC after: 1 month Sponsored by: DARPA, AFRL
2014-11-21 20:02:06 +00:00
Move common macros into asm.h. Replace MIPS_CPU_NOP_DELAY with HAZARD_DELAY. Move HAZARD_DELAY and ITLBNOPFIX into asm.h, for possible later optimization... Reviewed by: jmallet, jchandra
2010-07-16 06:35:17 +00:00
/*
* Various macros for dealing with TLB hazards
* (a) why so many?
* (b) when to use?
* (c) why not used everywhere?
*/
/*
* Assume that w alaways need nops to escape CP0 hazard
* TODO: Make hazard delays configurable. Stuck with 5 cycles on the moment
* For more info on CP0 hazards see Chapter 7 (p.99) of "MIPS32 Architecture
* For Programmers Volume III: The MIPS32 Privileged Resource Architecture"
*/
Fix COP0 hazards for XLR and XLP The XLR CPUs do not have any software visible hazards for COP0 operations. On XLP the hazard is a ehb, since it is mips64r2.
2011-11-18 09:30:24 +00:00
#if defined(CPU_NLM)
#define HAZARD_DELAY sll $0,3
#define ITLBNOPFIX sll $0,3
#elif defined(CPU_RMI)
#define HAZARD_DELAY
#define ITLBNOPFIX
Rename some CPU_MIPSxxx options and add new CPU_MIPSxxx options This revision does the following renames: CPU_MIPS24KC -> CPU_MIPS24K CPU_MIPS74KC -> CPU_MIPS74K CPU_MIPS1004KC -> CPU_MIPS1004K It also adds the following new CPU_MIPSxxx options: CPU_MIPS24KE, CPU_MIPS34K, CPU_MIPS1074K, CPU_INTERAPTIV, CPU_PROAPTIV CPU_MIPSxxxxKC is limiting and possibly misleading as it implies the MIPSxxxxK CPU has no FPU. It would be better if the CPUs are named after their standard functionalities only and the presence or absence of FPU can then be controlled via the CPU_HAVEFPU option. I will send out another dependent revision that moves MIPS 32 r2 and r3 CPUs to use the EHB instruction for clearing hazards instead of NOP/SSNOP. Submitted by: Stanislav Galabov <sgalabov@gmail.com> Reviewed by: imp Differential Revision: https://reviews.freebsd.org/D5077
2016-02-02 07:47:38 +00:00
#elif defined(CPU_MIPS74K)
Add "better" MIPS24k and MIPS74k barriers. * the mips74k cores only need EHB (which is 'sll $0, $0, 3') here; NOPs don't actually work. * add EHB as the last NOP for the default barriers/hazards; that is "better" behaviour and should work on a wider variety of processors. This allows the existing (icky) TLB code to work, allowing the AR9344 SoC (mips74k) to actually get through kernel startup. Tested: * AR9344 SoC - (mips74k) * AR9331 SoC - (mips24k) TODO: * test on mips4k CPUs, just to be sure. * document that sll $0, $0, 3 is actually "EHB" and that it falls back to being a NOP for pre-mips32r1. * mips24k has an errata that we currently don't correctly explicitly state - ie, that after DERET/ERET, the only valid instruction is a NOP. Reviewed by: imp@ Approved by: re@ (gjb)
2013-10-09 00:27:12 +00:00
#define HAZARD_DELAY sll $0,$0,3
#define ITLBNOPFIX sll $0,$0,3
Fix COP0 hazards for XLR and XLP The XLR CPUs do not have any software visible hazards for COP0 operations. On XLP the hazard is a ehb, since it is mips64r2.
2011-11-18 09:30:24 +00:00
#else
Add "better" MIPS24k and MIPS74k barriers. * the mips74k cores only need EHB (which is 'sll $0, $0, 3') here; NOPs don't actually work. * add EHB as the last NOP for the default barriers/hazards; that is "better" behaviour and should work on a wider variety of processors. This allows the existing (icky) TLB code to work, allowing the AR9344 SoC (mips74k) to actually get through kernel startup. Tested: * AR9344 SoC - (mips74k) * AR9331 SoC - (mips24k) TODO: * test on mips4k CPUs, just to be sure. * document that sll $0, $0, 3 is actually "EHB" and that it falls back to being a NOP for pre-mips32r1. * mips24k has an errata that we currently don't correctly explicitly state - ie, that after DERET/ERET, the only valid instruction is a NOP. Reviewed by: imp@ Approved by: re@ (gjb)
2013-10-09 00:27:12 +00:00
#define ITLBNOPFIX nop;nop;nop;nop;nop;nop;nop;nop;nop;sll $0,$0,3;
#define HAZARD_DELAY nop;nop;nop;nop;sll $0,$0,3;
Fix COP0 hazards for XLR and XLP The XLR CPUs do not have any software visible hazards for COP0 operations. On XLP the hazard is a ehb, since it is mips64r2.
2011-11-18 09:30:24 +00:00
#endif
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#endif /* !_MACHINE_ASM_H_ */
Reference in New Issue Copy Permalink