Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
2009-05-03 04:01:43 +00:00
|
|
|
/*
|
|
|
|
* Copyright (c) 2007 The DragonFly Project. All rights reserved.
|
|
|
|
*
|
|
|
|
* This code is derived from software contributed to The DragonFly Project
|
|
|
|
* by Sepherosa Ziehau <sepherosa@gmail.com>
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
*
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in
|
|
|
|
* the documentation and/or other materials provided with the
|
|
|
|
* distribution.
|
|
|
|
* 3. Neither the name of The DragonFly Project nor the names of its
|
|
|
|
* contributors may be used to endorse or promote products derived
|
|
|
|
* from this software without specific, prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
|
|
* COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
|
|
|
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*
|
|
|
|
* $DragonFly: src/sys/dev/netif/bwi/bwiphy.c,v 1.5 2008/01/15 09:01:13 sephe Exp $
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
|
|
|
#include "opt_inet.h"
|
2012-05-12 15:11:53 +00:00
|
|
|
#include "opt_wlan.h"
|
Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
2009-05-03 04:01:43 +00:00
|
|
|
|
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/endian.h>
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
#include <sys/bus.h>
|
|
|
|
#include <sys/malloc.h>
|
|
|
|
#include <sys/proc.h>
|
|
|
|
#include <sys/rman.h>
|
|
|
|
#include <sys/socket.h>
|
|
|
|
#include <sys/sockio.h>
|
|
|
|
#include <sys/sysctl.h>
|
|
|
|
#include <sys/systm.h>
|
|
|
|
|
|
|
|
#include <net/if.h>
|
2013-10-26 17:58:36 +00:00
|
|
|
#include <net/if_var.h>
|
Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
2009-05-03 04:01:43 +00:00
|
|
|
#include <net/if_dl.h>
|
|
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/if_types.h>
|
|
|
|
#include <net/if_arp.h>
|
|
|
|
#include <net/ethernet.h>
|
|
|
|
#include <net/if_llc.h>
|
|
|
|
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
|
|
#include <net80211/ieee80211_radiotap.h>
|
|
|
|
#include <net80211/ieee80211_amrr.h>
|
|
|
|
|
|
|
|
#include <machine/bus.h>
|
|
|
|
|
|
|
|
#include <dev/bwi/bitops.h>
|
|
|
|
#include <dev/bwi/if_bwireg.h>
|
|
|
|
#include <dev/bwi/if_bwivar.h>
|
|
|
|
#include <dev/bwi/bwimac.h>
|
|
|
|
#include <dev/bwi/bwirf.h>
|
|
|
|
#include <dev/bwi/bwiphy.h>
|
|
|
|
|
|
|
|
static void bwi_phy_init_11a(struct bwi_mac *);
|
|
|
|
static void bwi_phy_init_11g(struct bwi_mac *);
|
|
|
|
static void bwi_phy_init_11b_rev2(struct bwi_mac *);
|
|
|
|
static void bwi_phy_init_11b_rev4(struct bwi_mac *);
|
|
|
|
static void bwi_phy_init_11b_rev5(struct bwi_mac *);
|
|
|
|
static void bwi_phy_init_11b_rev6(struct bwi_mac *);
|
|
|
|
|
|
|
|
static void bwi_phy_config_11g(struct bwi_mac *);
|
|
|
|
static void bwi_phy_config_agc(struct bwi_mac *);
|
|
|
|
|
|
|
|
static void bwi_tbl_write_2(struct bwi_mac *mac, uint16_t, uint16_t);
|
|
|
|
static void bwi_tbl_write_4(struct bwi_mac *mac, uint16_t, uint32_t);
|
|
|
|
|
|
|
|
#define SUP_BPHY(num) { .rev = num, .init = bwi_phy_init_11b_rev##num }
|
|
|
|
|
|
|
|
static const struct {
|
|
|
|
uint8_t rev;
|
|
|
|
void (*init)(struct bwi_mac *);
|
|
|
|
} bwi_sup_bphy[] = {
|
|
|
|
SUP_BPHY(2),
|
|
|
|
SUP_BPHY(4),
|
|
|
|
SUP_BPHY(5),
|
|
|
|
SUP_BPHY(6)
|
|
|
|
};
|
|
|
|
|
|
|
|
#undef SUP_BPHY
|
|
|
|
|
|
|
|
#define BWI_PHYTBL_WRSSI 0x1000
|
|
|
|
#define BWI_PHYTBL_NOISE_SCALE 0x1400
|
|
|
|
#define BWI_PHYTBL_NOISE 0x1800
|
|
|
|
#define BWI_PHYTBL_ROTOR 0x2000
|
|
|
|
#define BWI_PHYTBL_DELAY 0x2400
|
|
|
|
#define BWI_PHYTBL_RSSI 0x4000
|
|
|
|
#define BWI_PHYTBL_SIGMA_SQ 0x5000
|
|
|
|
#define BWI_PHYTBL_WRSSI_REV1 0x5400
|
|
|
|
#define BWI_PHYTBL_FREQ 0x5800
|
|
|
|
|
|
|
|
static const uint16_t bwi_phy_freq_11g_rev1[] =
|
|
|
|
{ BWI_PHY_FREQ_11G_REV1 };
|
|
|
|
static const uint16_t bwi_phy_noise_11g_rev1[] =
|
|
|
|
{ BWI_PHY_NOISE_11G_REV1 };
|
|
|
|
static const uint16_t bwi_phy_noise_11g[] =
|
|
|
|
{ BWI_PHY_NOISE_11G };
|
|
|
|
static const uint32_t bwi_phy_rotor_11g_rev1[] =
|
|
|
|
{ BWI_PHY_ROTOR_11G_REV1 };
|
|
|
|
static const uint16_t bwi_phy_noise_scale_11g_rev2[] =
|
|
|
|
{ BWI_PHY_NOISE_SCALE_11G_REV2 };
|
|
|
|
static const uint16_t bwi_phy_noise_scale_11g_rev7[] =
|
|
|
|
{ BWI_PHY_NOISE_SCALE_11G_REV7 };
|
|
|
|
static const uint16_t bwi_phy_noise_scale_11g[] =
|
|
|
|
{ BWI_PHY_NOISE_SCALE_11G };
|
|
|
|
static const uint16_t bwi_phy_sigma_sq_11g_rev2[] =
|
|
|
|
{ BWI_PHY_SIGMA_SQ_11G_REV2 };
|
|
|
|
static const uint16_t bwi_phy_sigma_sq_11g_rev7[] =
|
|
|
|
{ BWI_PHY_SIGMA_SQ_11G_REV7 };
|
|
|
|
static const uint32_t bwi_phy_delay_11g_rev1[] =
|
|
|
|
{ BWI_PHY_DELAY_11G_REV1 };
|
|
|
|
|
|
|
|
void
|
|
|
|
bwi_phy_write(struct bwi_mac *mac, uint16_t ctrl, uint16_t data)
|
|
|
|
{
|
|
|
|
struct bwi_softc *sc = mac->mac_sc;
|
|
|
|
|
|
|
|
CSR_WRITE_2(sc, BWI_PHY_CTRL, ctrl);
|
|
|
|
CSR_WRITE_2(sc, BWI_PHY_DATA, data);
|
|
|
|
}
|
|
|
|
|
|
|
|
uint16_t
|
|
|
|
bwi_phy_read(struct bwi_mac *mac, uint16_t ctrl)
|
|
|
|
{
|
|
|
|
struct bwi_softc *sc = mac->mac_sc;
|
|
|
|
|
|
|
|
CSR_WRITE_2(sc, BWI_PHY_CTRL, ctrl);
|
|
|
|
return CSR_READ_2(sc, BWI_PHY_DATA);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
bwi_phy_attach(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
struct bwi_softc *sc = mac->mac_sc;
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
uint8_t phyrev, phytype, phyver;
|
|
|
|
uint16_t val;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/* Get PHY type/revision/version */
|
|
|
|
val = CSR_READ_2(sc, BWI_PHYINFO);
|
|
|
|
phyrev = __SHIFTOUT(val, BWI_PHYINFO_REV_MASK);
|
|
|
|
phytype = __SHIFTOUT(val, BWI_PHYINFO_TYPE_MASK);
|
|
|
|
phyver = __SHIFTOUT(val, BWI_PHYINFO_VER_MASK);
|
|
|
|
device_printf(sc->sc_dev, "PHY: type %d, rev %d, ver %d\n",
|
|
|
|
phytype, phyrev, phyver);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Verify whether the revision of the PHY type is supported
|
|
|
|
* Convert PHY type to ieee80211_phymode
|
|
|
|
*/
|
|
|
|
switch (phytype) {
|
|
|
|
case BWI_PHYINFO_TYPE_11A:
|
|
|
|
if (phyrev >= 4) {
|
|
|
|
device_printf(sc->sc_dev, "unsupported 11A PHY, "
|
|
|
|
"rev %u\n", phyrev);
|
|
|
|
return ENXIO;
|
|
|
|
}
|
|
|
|
phy->phy_init = bwi_phy_init_11a;
|
|
|
|
phy->phy_mode = IEEE80211_MODE_11A;
|
|
|
|
phy->phy_tbl_ctrl = BWI_PHYR_TBL_CTRL_11A;
|
|
|
|
phy->phy_tbl_data_lo = BWI_PHYR_TBL_DATA_LO_11A;
|
|
|
|
phy->phy_tbl_data_hi = BWI_PHYR_TBL_DATA_HI_11A;
|
|
|
|
break;
|
|
|
|
case BWI_PHYINFO_TYPE_11B:
|
|
|
|
#define N(arr) (int)(sizeof(arr) / sizeof(arr[0]))
|
|
|
|
for (i = 0; i < N(bwi_sup_bphy); ++i) {
|
|
|
|
if (phyrev == bwi_sup_bphy[i].rev) {
|
|
|
|
phy->phy_init = bwi_sup_bphy[i].init;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (i == N(bwi_sup_bphy)) {
|
|
|
|
device_printf(sc->sc_dev, "unsupported 11B PHY, "
|
|
|
|
"rev %u\n", phyrev);
|
|
|
|
return ENXIO;
|
|
|
|
}
|
|
|
|
#undef N
|
|
|
|
phy->phy_mode = IEEE80211_MODE_11B;
|
|
|
|
break;
|
|
|
|
case BWI_PHYINFO_TYPE_11G:
|
|
|
|
if (phyrev > 8) {
|
|
|
|
device_printf(sc->sc_dev, "unsupported 11G PHY, "
|
|
|
|
"rev %u\n", phyrev);
|
|
|
|
return ENXIO;
|
|
|
|
}
|
|
|
|
phy->phy_init = bwi_phy_init_11g;
|
|
|
|
phy->phy_mode = IEEE80211_MODE_11G;
|
|
|
|
phy->phy_tbl_ctrl = BWI_PHYR_TBL_CTRL_11G;
|
|
|
|
phy->phy_tbl_data_lo = BWI_PHYR_TBL_DATA_LO_11G;
|
|
|
|
phy->phy_tbl_data_hi = BWI_PHYR_TBL_DATA_HI_11G;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
device_printf(sc->sc_dev, "unsupported PHY type %d\n",
|
|
|
|
phytype);
|
|
|
|
return ENXIO;
|
|
|
|
}
|
|
|
|
phy->phy_rev = phyrev;
|
|
|
|
phy->phy_version = phyver;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
bwi_phy_set_bbp_atten(struct bwi_mac *mac, uint16_t bbp_atten)
|
|
|
|
{
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
uint16_t mask = __BITS(3, 0);
|
|
|
|
|
|
|
|
if (phy->phy_version == 0) {
|
|
|
|
CSR_FILT_SETBITS_2(mac->mac_sc, BWI_BBP_ATTEN, ~mask,
|
|
|
|
__SHIFTIN(bbp_atten, mask));
|
|
|
|
} else {
|
|
|
|
if (phy->phy_version > 1)
|
|
|
|
mask <<= 2;
|
|
|
|
else
|
|
|
|
mask <<= 3;
|
|
|
|
PHY_FILT_SETBITS(mac, BWI_PHYR_BBP_ATTEN, ~mask,
|
|
|
|
__SHIFTIN(bbp_atten, mask));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
bwi_phy_calibrate(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
|
|
|
|
/* Dummy read */
|
|
|
|
CSR_READ_4(mac->mac_sc, BWI_MAC_STATUS);
|
|
|
|
|
|
|
|
/* Don't re-init */
|
|
|
|
if (phy->phy_flags & BWI_PHY_F_CALIBRATED)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (phy->phy_mode == IEEE80211_MODE_11G && phy->phy_rev == 1) {
|
|
|
|
bwi_mac_reset(mac, 0);
|
|
|
|
bwi_phy_init_11g(mac);
|
|
|
|
bwi_mac_reset(mac, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
phy->phy_flags |= BWI_PHY_F_CALIBRATED;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_tbl_write_2(struct bwi_mac *mac, uint16_t ofs, uint16_t data)
|
|
|
|
{
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
|
|
|
|
KASSERT(phy->phy_tbl_ctrl != 0 && phy->phy_tbl_data_lo != 0,
|
|
|
|
("phy_tbl_ctrl %d phy_tbl_data_lo %d",
|
|
|
|
phy->phy_tbl_ctrl, phy->phy_tbl_data_lo));
|
|
|
|
PHY_WRITE(mac, phy->phy_tbl_ctrl, ofs);
|
|
|
|
PHY_WRITE(mac, phy->phy_tbl_data_lo, data);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_tbl_write_4(struct bwi_mac *mac, uint16_t ofs, uint32_t data)
|
|
|
|
{
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
|
|
|
|
KASSERT(phy->phy_tbl_data_lo != 0 && phy->phy_tbl_data_hi != 0 &&
|
|
|
|
phy->phy_tbl_ctrl != 0,
|
|
|
|
("phy_tbl_data_lo %d phy_tbl_data_hi %d phy_tbl_ctrl %d",
|
|
|
|
phy->phy_tbl_data_lo, phy->phy_tbl_data_hi, phy->phy_tbl_ctrl));
|
|
|
|
|
|
|
|
PHY_WRITE(mac, phy->phy_tbl_ctrl, ofs);
|
|
|
|
PHY_WRITE(mac, phy->phy_tbl_data_hi, data >> 16);
|
|
|
|
PHY_WRITE(mac, phy->phy_tbl_data_lo, data & 0xffff);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
bwi_nrssi_write(struct bwi_mac *mac, uint16_t ofs, int16_t data)
|
|
|
|
{
|
|
|
|
PHY_WRITE(mac, BWI_PHYR_NRSSI_CTRL, ofs);
|
|
|
|
PHY_WRITE(mac, BWI_PHYR_NRSSI_DATA, (uint16_t)data);
|
|
|
|
}
|
|
|
|
|
|
|
|
int16_t
|
|
|
|
bwi_nrssi_read(struct bwi_mac *mac, uint16_t ofs)
|
|
|
|
{
|
|
|
|
PHY_WRITE(mac, BWI_PHYR_NRSSI_CTRL, ofs);
|
|
|
|
return (int16_t)PHY_READ(mac, BWI_PHYR_NRSSI_DATA);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_phy_init_11a(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
/* TODO:11A */
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_phy_init_11g(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
struct bwi_softc *sc = mac->mac_sc;
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
struct bwi_rf *rf = &mac->mac_rf;
|
|
|
|
const struct bwi_tpctl *tpctl = &mac->mac_tpctl;
|
|
|
|
|
|
|
|
if (phy->phy_rev == 1)
|
|
|
|
bwi_phy_init_11b_rev5(mac);
|
|
|
|
else
|
|
|
|
bwi_phy_init_11b_rev6(mac);
|
|
|
|
|
|
|
|
if (phy->phy_rev >= 2 || (phy->phy_flags & BWI_PHY_F_LINKED))
|
|
|
|
bwi_phy_config_11g(mac);
|
|
|
|
|
|
|
|
if (phy->phy_rev >= 2) {
|
|
|
|
PHY_WRITE(mac, 0x814, 0);
|
|
|
|
PHY_WRITE(mac, 0x815, 0);
|
|
|
|
|
|
|
|
if (phy->phy_rev == 2) {
|
|
|
|
PHY_WRITE(mac, 0x811, 0);
|
|
|
|
PHY_WRITE(mac, 0x15, 0xc0);
|
|
|
|
} else if (phy->phy_rev > 5) {
|
|
|
|
PHY_WRITE(mac, 0x811, 0x400);
|
|
|
|
PHY_WRITE(mac, 0x15, 0xc0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (phy->phy_rev >= 2 || (phy->phy_flags & BWI_PHY_F_LINKED)) {
|
|
|
|
uint16_t val;
|
|
|
|
|
|
|
|
val = PHY_READ(mac, 0x400) & 0xff;
|
|
|
|
if (val == 3 || val == 5) {
|
|
|
|
PHY_WRITE(mac, 0x4c2, 0x1816);
|
|
|
|
PHY_WRITE(mac, 0x4c3, 0x8006);
|
|
|
|
if (val == 5) {
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4cc,
|
|
|
|
0xff, 0x1f00);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((phy->phy_rev <= 2 && (phy->phy_flags & BWI_PHY_F_LINKED)) ||
|
|
|
|
phy->phy_rev >= 2)
|
|
|
|
PHY_WRITE(mac, 0x47e, 0x78);
|
|
|
|
|
|
|
|
if (rf->rf_rev == 8) {
|
|
|
|
PHY_SETBITS(mac, 0x801, 0x80);
|
|
|
|
PHY_SETBITS(mac, 0x43e, 0x4);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (phy->phy_rev >= 2 && (phy->phy_flags & BWI_PHY_F_LINKED))
|
|
|
|
bwi_rf_get_gains(mac);
|
|
|
|
|
|
|
|
if (rf->rf_rev != 8)
|
|
|
|
bwi_rf_init(mac);
|
|
|
|
|
|
|
|
if (tpctl->tp_ctrl2 == 0xffff) {
|
|
|
|
bwi_rf_lo_update(mac);
|
|
|
|
} else {
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050 && rf->rf_rev == 8) {
|
|
|
|
RF_WRITE(mac, 0x52,
|
|
|
|
(tpctl->tp_ctrl1 << 4) | tpctl->tp_ctrl2);
|
|
|
|
} else {
|
2009-05-18 15:31:26 +00:00
|
|
|
RF_FILT_SETBITS(mac, 0x52, 0xfff0, tpctl->tp_ctrl2);
|
Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
2009-05-03 04:01:43 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (phy->phy_rev >= 6) {
|
|
|
|
PHY_FILT_SETBITS(mac, 0x36, 0xfff,
|
|
|
|
tpctl->tp_ctrl2 << 12);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (sc->sc_card_flags & BWI_CARD_F_PA_GPIO9)
|
|
|
|
PHY_WRITE(mac, 0x2e, 0x8075);
|
|
|
|
else
|
|
|
|
PHY_WRITE(mac, 0x2e, 0x807f);
|
|
|
|
|
|
|
|
if (phy->phy_rev < 2)
|
|
|
|
PHY_WRITE(mac, 0x2f, 0x101);
|
|
|
|
else
|
|
|
|
PHY_WRITE(mac, 0x2f, 0x202);
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((phy->phy_flags & BWI_PHY_F_LINKED) || phy->phy_rev >= 2) {
|
|
|
|
bwi_rf_lo_adjust(mac, tpctl);
|
|
|
|
PHY_WRITE(mac, 0x80f, 0x8078);
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((sc->sc_card_flags & BWI_CARD_F_SW_NRSSI) == 0) {
|
|
|
|
bwi_rf_init_hw_nrssi_table(mac, 0xffff /* XXX */);
|
|
|
|
bwi_rf_set_nrssi_thr(mac);
|
|
|
|
} else if ((phy->phy_flags & BWI_PHY_F_LINKED) || phy->phy_rev >= 2) {
|
|
|
|
if (rf->rf_nrssi[0] == BWI_INVALID_NRSSI) {
|
|
|
|
KASSERT(rf->rf_nrssi[1] == BWI_INVALID_NRSSI,
|
|
|
|
("rf_nrssi[1] %d", rf->rf_nrssi[1]));
|
|
|
|
bwi_rf_calc_nrssi_slope(mac);
|
|
|
|
} else {
|
|
|
|
KASSERT(rf->rf_nrssi[1] != BWI_INVALID_NRSSI,
|
|
|
|
("rf_nrssi[1] %d", rf->rf_nrssi[1]));
|
|
|
|
bwi_rf_set_nrssi_thr(mac);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (rf->rf_rev == 8)
|
|
|
|
PHY_WRITE(mac, 0x805, 0x3230);
|
|
|
|
|
|
|
|
bwi_mac_init_tpctl_11bg(mac);
|
|
|
|
|
|
|
|
if (sc->sc_bbp_id == BWI_BBPID_BCM4306 && sc->sc_bbp_pkg == 2) {
|
|
|
|
PHY_CLRBITS(mac, 0x429, 0x4000);
|
|
|
|
PHY_CLRBITS(mac, 0x4c3, 0x8000);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_phy_init_11b_rev2(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
/* TODO:11B */
|
|
|
|
if_printf(mac->mac_sc->sc_ifp,
|
|
|
|
"%s is not implemented yet\n", __func__);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_phy_init_11b_rev4(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
struct bwi_softc *sc = mac->mac_sc;
|
|
|
|
struct bwi_rf *rf = &mac->mac_rf;
|
|
|
|
uint16_t val, ofs;
|
|
|
|
u_int chan;
|
|
|
|
|
|
|
|
CSR_WRITE_2(sc, BWI_BPHY_CTRL, BWI_BPHY_CTRL_INIT);
|
|
|
|
|
|
|
|
PHY_WRITE(mac, 0x20, 0x301c);
|
|
|
|
PHY_WRITE(mac, 0x26, 0);
|
|
|
|
PHY_WRITE(mac, 0x30, 0xc6);
|
|
|
|
PHY_WRITE(mac, 0x88, 0x3e00);
|
|
|
|
|
|
|
|
for (ofs = 0, val = 0x3c3d; ofs < 30; ++ofs, val -= 0x202)
|
|
|
|
PHY_WRITE(mac, 0x89 + ofs, val);
|
|
|
|
|
|
|
|
CSR_WRITE_2(sc, BWI_PHY_MAGIC_REG1, BWI_PHY_MAGIC_REG1_VAL1);
|
|
|
|
|
|
|
|
chan = rf->rf_curchan;
|
|
|
|
if (chan == IEEE80211_CHAN_ANY)
|
|
|
|
chan = 6; /* Force to channel 6 */
|
|
|
|
bwi_rf_set_chan(mac, chan, 0);
|
|
|
|
|
|
|
|
if (rf->rf_type != BWI_RF_T_BCM2050) {
|
|
|
|
RF_WRITE(mac, 0x75, 0x80);
|
|
|
|
RF_WRITE(mac, 0x79, 0x81);
|
|
|
|
}
|
|
|
|
|
|
|
|
RF_WRITE(mac, 0x50, 0x20);
|
|
|
|
RF_WRITE(mac, 0x50, 0x23);
|
|
|
|
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050) {
|
|
|
|
RF_WRITE(mac, 0x50, 0x20);
|
|
|
|
RF_WRITE(mac, 0x5a, 0x70);
|
|
|
|
RF_WRITE(mac, 0x5b, 0x7b);
|
|
|
|
RF_WRITE(mac, 0x5c, 0xb0);
|
|
|
|
RF_WRITE(mac, 0x7a, 0xf);
|
|
|
|
PHY_WRITE(mac, 0x38, 0x677);
|
|
|
|
bwi_rf_init_bcm2050(mac);
|
|
|
|
}
|
|
|
|
|
|
|
|
PHY_WRITE(mac, 0x14, 0x80);
|
|
|
|
PHY_WRITE(mac, 0x32, 0xca);
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050)
|
|
|
|
PHY_WRITE(mac, 0x32, 0xe0);
|
|
|
|
PHY_WRITE(mac, 0x35, 0x7c2);
|
|
|
|
|
|
|
|
bwi_rf_lo_update(mac);
|
|
|
|
|
|
|
|
PHY_WRITE(mac, 0x26, 0xcc00);
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050)
|
|
|
|
PHY_WRITE(mac, 0x26, 0xce00);
|
|
|
|
|
|
|
|
CSR_WRITE_2(sc, BWI_RF_CHAN_EX, 0x1100);
|
|
|
|
|
|
|
|
PHY_WRITE(mac, 0x2a, 0x88a3);
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050)
|
|
|
|
PHY_WRITE(mac, 0x2a, 0x88c2);
|
|
|
|
|
|
|
|
bwi_mac_set_tpctl_11bg(mac, NULL);
|
|
|
|
if (sc->sc_card_flags & BWI_CARD_F_SW_NRSSI) {
|
|
|
|
bwi_rf_calc_nrssi_slope(mac);
|
|
|
|
bwi_rf_set_nrssi_thr(mac);
|
|
|
|
}
|
|
|
|
bwi_mac_init_tpctl_11bg(mac);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_phy_init_11b_rev5(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
struct bwi_softc *sc = mac->mac_sc;
|
|
|
|
struct bwi_rf *rf = &mac->mac_rf;
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
u_int orig_chan;
|
|
|
|
|
|
|
|
if (phy->phy_version == 1)
|
|
|
|
RF_SETBITS(mac, 0x7a, 0x50);
|
|
|
|
|
|
|
|
if (sc->sc_pci_subvid != PCI_VENDOR_BROADCOM &&
|
|
|
|
sc->sc_pci_subdid != BWI_PCI_SUBDEVICE_BU4306) {
|
|
|
|
uint16_t ofs, val;
|
|
|
|
|
|
|
|
val = 0x2120;
|
|
|
|
for (ofs = 0xa8; ofs < 0xc7; ++ofs) {
|
|
|
|
PHY_WRITE(mac, ofs, val);
|
|
|
|
val += 0x202;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
PHY_FILT_SETBITS(mac, 0x35, 0xf0ff, 0x700);
|
|
|
|
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050)
|
|
|
|
PHY_WRITE(mac, 0x38, 0x667);
|
|
|
|
|
|
|
|
if ((phy->phy_flags & BWI_PHY_F_LINKED) || phy->phy_rev >= 2) {
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050) {
|
|
|
|
RF_SETBITS(mac, 0x7a, 0x20);
|
|
|
|
RF_SETBITS(mac, 0x51, 0x4);
|
|
|
|
}
|
|
|
|
|
|
|
|
CSR_WRITE_2(sc, BWI_RF_ANTDIV, 0);
|
|
|
|
|
|
|
|
PHY_SETBITS(mac, 0x802, 0x100);
|
|
|
|
PHY_SETBITS(mac, 0x42b, 0x2000);
|
|
|
|
PHY_WRITE(mac, 0x1c, 0x186a);
|
|
|
|
|
|
|
|
PHY_FILT_SETBITS(mac, 0x13, 0xff, 0x1900);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x35, 0xffc0, 0x64);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x5d, 0xff80, 0xa);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* TODO: bad_frame_preempt? */
|
|
|
|
|
|
|
|
if (phy->phy_version == 1) {
|
|
|
|
PHY_WRITE(mac, 0x26, 0xce00);
|
|
|
|
PHY_WRITE(mac, 0x21, 0x3763);
|
|
|
|
PHY_WRITE(mac, 0x22, 0x1bc3);
|
|
|
|
PHY_WRITE(mac, 0x23, 0x6f9);
|
|
|
|
PHY_WRITE(mac, 0x24, 0x37e);
|
|
|
|
} else {
|
|
|
|
PHY_WRITE(mac, 0x26, 0xcc00);
|
|
|
|
}
|
|
|
|
PHY_WRITE(mac, 0x30, 0xc6);
|
|
|
|
|
|
|
|
CSR_WRITE_2(sc, BWI_BPHY_CTRL, BWI_BPHY_CTRL_INIT);
|
|
|
|
|
|
|
|
if (phy->phy_version == 1)
|
|
|
|
PHY_WRITE(mac, 0x20, 0x3e1c);
|
|
|
|
else
|
|
|
|
PHY_WRITE(mac, 0x20, 0x301c);
|
|
|
|
|
|
|
|
if (phy->phy_version == 0)
|
|
|
|
CSR_WRITE_2(sc, BWI_PHY_MAGIC_REG1, BWI_PHY_MAGIC_REG1_VAL1);
|
|
|
|
|
|
|
|
/* Force to channel 7 */
|
|
|
|
orig_chan = rf->rf_curchan;
|
|
|
|
bwi_rf_set_chan(mac, 7, 0);
|
|
|
|
|
|
|
|
if (rf->rf_type != BWI_RF_T_BCM2050) {
|
|
|
|
RF_WRITE(mac, 0x75, 0x80);
|
|
|
|
RF_WRITE(mac, 0x79, 0x81);
|
|
|
|
}
|
|
|
|
|
|
|
|
RF_WRITE(mac, 0x50, 0x20);
|
|
|
|
RF_WRITE(mac, 0x50, 0x23);
|
|
|
|
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050) {
|
|
|
|
RF_WRITE(mac, 0x50, 0x20);
|
|
|
|
RF_WRITE(mac, 0x5a, 0x70);
|
|
|
|
}
|
|
|
|
|
|
|
|
RF_WRITE(mac, 0x5b, 0x7b);
|
|
|
|
RF_WRITE(mac, 0x5c, 0xb0);
|
|
|
|
RF_SETBITS(mac, 0x7a, 0x7);
|
|
|
|
|
|
|
|
bwi_rf_set_chan(mac, orig_chan, 0);
|
|
|
|
|
|
|
|
PHY_WRITE(mac, 0x14, 0x80);
|
|
|
|
PHY_WRITE(mac, 0x32, 0xca);
|
|
|
|
PHY_WRITE(mac, 0x2a, 0x88a3);
|
|
|
|
|
|
|
|
bwi_mac_set_tpctl_11bg(mac, NULL);
|
|
|
|
|
|
|
|
if (rf->rf_type == BWI_RF_T_BCM2050)
|
|
|
|
RF_WRITE(mac, 0x5d, 0xd);
|
|
|
|
|
|
|
|
CSR_FILT_SETBITS_2(sc, BWI_PHY_MAGIC_REG1, 0xffc0, 0x4);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_phy_init_11b_rev6(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
struct bwi_softc *sc = mac->mac_sc;
|
|
|
|
struct bwi_rf *rf = &mac->mac_rf;
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
uint16_t val, ofs;
|
|
|
|
u_int orig_chan;
|
|
|
|
|
|
|
|
PHY_WRITE(mac, 0x3e, 0x817a);
|
|
|
|
RF_SETBITS(mac, 0x7a, 0x58);
|
|
|
|
|
|
|
|
if (rf->rf_rev == 4 || rf->rf_rev == 5) {
|
|
|
|
RF_WRITE(mac, 0x51, 0x37);
|
|
|
|
RF_WRITE(mac, 0x52, 0x70);
|
|
|
|
RF_WRITE(mac, 0x53, 0xb3);
|
|
|
|
RF_WRITE(mac, 0x54, 0x9b);
|
|
|
|
RF_WRITE(mac, 0x5a, 0x88);
|
|
|
|
RF_WRITE(mac, 0x5b, 0x88);
|
|
|
|
RF_WRITE(mac, 0x5d, 0x88);
|
|
|
|
RF_WRITE(mac, 0x5e, 0x88);
|
|
|
|
RF_WRITE(mac, 0x7d, 0x88);
|
|
|
|
HFLAGS_SETBITS(mac, BWI_HFLAG_MAGIC1);
|
|
|
|
} else if (rf->rf_rev == 8) {
|
|
|
|
RF_WRITE(mac, 0x51, 0);
|
|
|
|
RF_WRITE(mac, 0x52, 0x40);
|
|
|
|
RF_WRITE(mac, 0x53, 0xb7);
|
|
|
|
RF_WRITE(mac, 0x54, 0x98);
|
|
|
|
RF_WRITE(mac, 0x5a, 0x88);
|
|
|
|
RF_WRITE(mac, 0x5b, 0x6b);
|
|
|
|
RF_WRITE(mac, 0x5c, 0xf);
|
|
|
|
if (sc->sc_card_flags & BWI_CARD_F_ALT_IQ) {
|
|
|
|
RF_WRITE(mac, 0x5d, 0xfa);
|
|
|
|
RF_WRITE(mac, 0x5e, 0xd8);
|
|
|
|
} else {
|
|
|
|
RF_WRITE(mac, 0x5d, 0xf5);
|
|
|
|
RF_WRITE(mac, 0x5e, 0xb8);
|
|
|
|
}
|
|
|
|
RF_WRITE(mac, 0x73, 0x3);
|
|
|
|
RF_WRITE(mac, 0x7d, 0xa8);
|
|
|
|
RF_WRITE(mac, 0x7c, 0x1);
|
|
|
|
RF_WRITE(mac, 0x7e, 0x8);
|
|
|
|
}
|
|
|
|
|
|
|
|
val = 0x1e1f;
|
|
|
|
for (ofs = 0x88; ofs < 0x98; ++ofs) {
|
|
|
|
PHY_WRITE(mac, ofs, val);
|
|
|
|
val -= 0x202;
|
|
|
|
}
|
|
|
|
|
|
|
|
val = 0x3e3f;
|
|
|
|
for (ofs = 0x98; ofs < 0xa8; ++ofs) {
|
|
|
|
PHY_WRITE(mac, ofs, val);
|
|
|
|
val -= 0x202;
|
|
|
|
}
|
|
|
|
|
|
|
|
val = 0x2120;
|
|
|
|
for (ofs = 0xa8; ofs < 0xc8; ++ofs) {
|
|
|
|
PHY_WRITE(mac, ofs, (val & 0x3f3f));
|
|
|
|
val += 0x202;
|
2009-05-13 16:19:05 +00:00
|
|
|
|
|
|
|
/* XXX: delay 10 us to avoid PCI parity errors with BCM4318 */
|
2009-05-13 14:25:55 +00:00
|
|
|
DELAY(10);
|
Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
2009-05-03 04:01:43 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (phy->phy_mode == IEEE80211_MODE_11G) {
|
|
|
|
RF_SETBITS(mac, 0x7a, 0x20);
|
|
|
|
RF_SETBITS(mac, 0x51, 0x4);
|
|
|
|
PHY_SETBITS(mac, 0x802, 0x100);
|
|
|
|
PHY_SETBITS(mac, 0x42b, 0x2000);
|
|
|
|
PHY_WRITE(mac, 0x5b, 0);
|
|
|
|
PHY_WRITE(mac, 0x5c, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Force to channel 7 */
|
|
|
|
orig_chan = rf->rf_curchan;
|
|
|
|
if (orig_chan >= 8)
|
|
|
|
bwi_rf_set_chan(mac, 1, 0);
|
|
|
|
else
|
|
|
|
bwi_rf_set_chan(mac, 13, 0);
|
|
|
|
|
|
|
|
RF_WRITE(mac, 0x50, 0x20);
|
|
|
|
RF_WRITE(mac, 0x50, 0x23);
|
|
|
|
|
|
|
|
DELAY(40);
|
|
|
|
|
|
|
|
if (rf->rf_rev < 6 || rf->rf_rev == 8) {
|
|
|
|
RF_SETBITS(mac, 0x7c, 0x2);
|
|
|
|
RF_WRITE(mac, 0x50, 0x20);
|
|
|
|
}
|
|
|
|
if (rf->rf_rev <= 2) {
|
|
|
|
RF_WRITE(mac, 0x7c, 0x20);
|
|
|
|
RF_WRITE(mac, 0x5a, 0x70);
|
|
|
|
RF_WRITE(mac, 0x5b, 0x7b);
|
|
|
|
RF_WRITE(mac, 0x5c, 0xb0);
|
|
|
|
}
|
|
|
|
|
|
|
|
RF_FILT_SETBITS(mac, 0x7a, 0xf8, 0x7);
|
|
|
|
|
|
|
|
bwi_rf_set_chan(mac, orig_chan, 0);
|
|
|
|
|
|
|
|
PHY_WRITE(mac, 0x14, 0x200);
|
|
|
|
if (rf->rf_rev >= 6)
|
|
|
|
PHY_WRITE(mac, 0x2a, 0x88c2);
|
|
|
|
else
|
|
|
|
PHY_WRITE(mac, 0x2a, 0x8ac0);
|
|
|
|
PHY_WRITE(mac, 0x38, 0x668);
|
|
|
|
|
|
|
|
bwi_mac_set_tpctl_11bg(mac, NULL);
|
|
|
|
|
|
|
|
if (rf->rf_rev <= 5) {
|
|
|
|
PHY_FILT_SETBITS(mac, 0x5d, 0xff80, 0x3);
|
|
|
|
if (rf->rf_rev <= 2)
|
|
|
|
RF_WRITE(mac, 0x5d, 0xd);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (phy->phy_version == 4) {
|
|
|
|
CSR_WRITE_2(sc, BWI_PHY_MAGIC_REG1, BWI_PHY_MAGIC_REG1_VAL2);
|
|
|
|
PHY_CLRBITS(mac, 0x61, 0xf000);
|
|
|
|
} else {
|
|
|
|
PHY_FILT_SETBITS(mac, 0x2, 0xffc0, 0x4);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (phy->phy_mode == IEEE80211_MODE_11B) {
|
|
|
|
CSR_WRITE_2(sc, BWI_BBP_ATTEN, BWI_BBP_ATTEN_MAGIC2);
|
|
|
|
PHY_WRITE(mac, 0x16, 0x410);
|
|
|
|
PHY_WRITE(mac, 0x17, 0x820);
|
|
|
|
PHY_WRITE(mac, 0x62, 0x7);
|
|
|
|
|
|
|
|
bwi_rf_init_bcm2050(mac);
|
|
|
|
bwi_rf_lo_update(mac);
|
|
|
|
if (sc->sc_card_flags & BWI_CARD_F_SW_NRSSI) {
|
|
|
|
bwi_rf_calc_nrssi_slope(mac);
|
|
|
|
bwi_rf_set_nrssi_thr(mac);
|
|
|
|
}
|
|
|
|
bwi_mac_init_tpctl_11bg(mac);
|
|
|
|
} else {
|
|
|
|
CSR_WRITE_2(sc, BWI_BBP_ATTEN, 0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#define N(arr) (int)(sizeof(arr) / sizeof(arr[0]))
|
|
|
|
|
|
|
|
static void
|
|
|
|
bwi_phy_config_11g(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
struct bwi_softc *sc = mac->mac_sc;
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
const uint16_t *tbl;
|
|
|
|
uint16_t wrd_ofs1, wrd_ofs2;
|
|
|
|
int i, n;
|
|
|
|
|
|
|
|
if (phy->phy_rev == 1) {
|
|
|
|
PHY_WRITE(mac, 0x406, 0x4f19);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x429, 0xfc3f, 0x340);
|
|
|
|
PHY_WRITE(mac, 0x42c, 0x5a);
|
|
|
|
PHY_WRITE(mac, 0x427, 0x1a);
|
|
|
|
|
|
|
|
/* Fill frequency table */
|
|
|
|
for (i = 0; i < N(bwi_phy_freq_11g_rev1); ++i) {
|
|
|
|
bwi_tbl_write_2(mac, BWI_PHYTBL_FREQ + i,
|
|
|
|
bwi_phy_freq_11g_rev1[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Fill noise table */
|
|
|
|
for (i = 0; i < N(bwi_phy_noise_11g_rev1); ++i) {
|
|
|
|
bwi_tbl_write_2(mac, BWI_PHYTBL_NOISE + i,
|
|
|
|
bwi_phy_noise_11g_rev1[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Fill rotor table */
|
|
|
|
for (i = 0; i < N(bwi_phy_rotor_11g_rev1); ++i) {
|
|
|
|
/* NB: data length is 4 bytes */
|
|
|
|
bwi_tbl_write_4(mac, BWI_PHYTBL_ROTOR + i,
|
|
|
|
bwi_phy_rotor_11g_rev1[i]);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
bwi_nrssi_write(mac, 0xba98, (int16_t)0x7654); /* XXX */
|
|
|
|
|
|
|
|
if (phy->phy_rev == 2) {
|
|
|
|
PHY_WRITE(mac, 0x4c0, 0x1861);
|
|
|
|
PHY_WRITE(mac, 0x4c1, 0x271);
|
|
|
|
} else if (phy->phy_rev > 2) {
|
|
|
|
PHY_WRITE(mac, 0x4c0, 0x98);
|
|
|
|
PHY_WRITE(mac, 0x4c1, 0x70);
|
|
|
|
PHY_WRITE(mac, 0x4c9, 0x80);
|
|
|
|
}
|
|
|
|
PHY_SETBITS(mac, 0x42b, 0x800);
|
|
|
|
|
|
|
|
/* Fill RSSI table */
|
|
|
|
for (i = 0; i < 64; ++i)
|
|
|
|
bwi_tbl_write_2(mac, BWI_PHYTBL_RSSI + i, i);
|
|
|
|
|
|
|
|
/* Fill noise table */
|
2011-10-10 02:54:58 +00:00
|
|
|
for (i = 0; i < N(bwi_phy_noise_11g); ++i) {
|
Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
2009-05-03 04:01:43 +00:00
|
|
|
bwi_tbl_write_2(mac, BWI_PHYTBL_NOISE + i,
|
|
|
|
bwi_phy_noise_11g[i]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Fill noise scale table
|
|
|
|
*/
|
|
|
|
if (phy->phy_rev <= 2) {
|
|
|
|
tbl = bwi_phy_noise_scale_11g_rev2;
|
|
|
|
n = N(bwi_phy_noise_scale_11g_rev2);
|
|
|
|
} else if (phy->phy_rev >= 7 && (PHY_READ(mac, 0x449) & 0x200)) {
|
|
|
|
tbl = bwi_phy_noise_scale_11g_rev7;
|
|
|
|
n = N(bwi_phy_noise_scale_11g_rev7);
|
|
|
|
} else {
|
|
|
|
tbl = bwi_phy_noise_scale_11g;
|
|
|
|
n = N(bwi_phy_noise_scale_11g);
|
|
|
|
}
|
|
|
|
for (i = 0; i < n; ++i)
|
|
|
|
bwi_tbl_write_2(mac, BWI_PHYTBL_NOISE_SCALE + i, tbl[i]);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Fill sigma square table
|
|
|
|
*/
|
|
|
|
if (phy->phy_rev == 2) {
|
|
|
|
tbl = bwi_phy_sigma_sq_11g_rev2;
|
|
|
|
n = N(bwi_phy_sigma_sq_11g_rev2);
|
|
|
|
} else if (phy->phy_rev > 2 && phy->phy_rev <= 8) {
|
|
|
|
tbl = bwi_phy_sigma_sq_11g_rev7;
|
|
|
|
n = N(bwi_phy_sigma_sq_11g_rev7);
|
|
|
|
} else {
|
|
|
|
tbl = NULL;
|
|
|
|
n = 0;
|
|
|
|
}
|
|
|
|
for (i = 0; i < n; ++i)
|
|
|
|
bwi_tbl_write_2(mac, BWI_PHYTBL_SIGMA_SQ + i, tbl[i]);
|
|
|
|
|
|
|
|
if (phy->phy_rev == 1) {
|
|
|
|
/* Fill delay table */
|
|
|
|
for (i = 0; i < N(bwi_phy_delay_11g_rev1); ++i) {
|
|
|
|
bwi_tbl_write_4(mac, BWI_PHYTBL_DELAY + i,
|
|
|
|
bwi_phy_delay_11g_rev1[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Fill WRSSI (Wide-Band RSSI) table */
|
|
|
|
for (i = 4; i < 20; ++i)
|
|
|
|
bwi_tbl_write_2(mac, BWI_PHYTBL_WRSSI_REV1 + i, 0x20);
|
|
|
|
|
|
|
|
bwi_phy_config_agc(mac);
|
|
|
|
|
|
|
|
wrd_ofs1 = 0x5001;
|
|
|
|
wrd_ofs2 = 0x5002;
|
|
|
|
} else {
|
|
|
|
/* Fill WRSSI (Wide-Band RSSI) table */
|
|
|
|
for (i = 0; i < 0x20; ++i)
|
|
|
|
bwi_tbl_write_2(mac, BWI_PHYTBL_WRSSI + i, 0x820);
|
|
|
|
|
|
|
|
bwi_phy_config_agc(mac);
|
|
|
|
|
|
|
|
PHY_READ(mac, 0x400); /* Dummy read */
|
|
|
|
PHY_WRITE(mac, 0x403, 0x1000);
|
|
|
|
bwi_tbl_write_2(mac, 0x3c02, 0xf);
|
|
|
|
bwi_tbl_write_2(mac, 0x3c03, 0x14);
|
|
|
|
|
|
|
|
wrd_ofs1 = 0x401;
|
|
|
|
wrd_ofs2 = 0x402;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(BWI_IS_BRCM_BU4306(sc) && sc->sc_pci_revid == 0x17)) {
|
|
|
|
bwi_tbl_write_2(mac, wrd_ofs1, 0x2);
|
|
|
|
bwi_tbl_write_2(mac, wrd_ofs2, 0x1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* phy->phy_flags & BWI_PHY_F_LINKED ? */
|
|
|
|
if (sc->sc_card_flags & BWI_CARD_F_PA_GPIO9)
|
|
|
|
PHY_WRITE(mac, 0x46e, 0x3cf);
|
|
|
|
}
|
|
|
|
|
|
|
|
#undef N
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Configure Automatic Gain Controller
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
bwi_phy_config_agc(struct bwi_mac *mac)
|
|
|
|
{
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
uint16_t ofs;
|
|
|
|
|
|
|
|
ofs = phy->phy_rev == 1 ? 0x4c00 : 0;
|
|
|
|
|
|
|
|
bwi_tbl_write_2(mac, ofs, 0xfe);
|
|
|
|
bwi_tbl_write_2(mac, ofs + 1, 0xd);
|
|
|
|
bwi_tbl_write_2(mac, ofs + 2, 0x13);
|
|
|
|
bwi_tbl_write_2(mac, ofs + 3, 0x19);
|
|
|
|
|
|
|
|
if (phy->phy_rev == 1) {
|
|
|
|
bwi_tbl_write_2(mac, 0x1800, 0x2710);
|
|
|
|
bwi_tbl_write_2(mac, 0x1801, 0x9b83);
|
|
|
|
bwi_tbl_write_2(mac, 0x1802, 0x9b83);
|
|
|
|
bwi_tbl_write_2(mac, 0x1803, 0xf8d);
|
|
|
|
PHY_WRITE(mac, 0x455, 0x4);
|
|
|
|
}
|
|
|
|
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a5, 0xff, 0x5700);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x41a, 0xff80, 0xf);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x41a, 0xc07f, 0x2b80);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x48c, 0xf0ff, 0x300);
|
|
|
|
|
|
|
|
RF_SETBITS(mac, 0x7a, 0x8);
|
|
|
|
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a0, 0xfff0, 0x8);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a1, 0xf0ff, 0x600);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a2, 0xf0ff, 0x700);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a0, 0xf0ff, 0x100);
|
|
|
|
|
|
|
|
if (phy->phy_rev == 1)
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a2, 0xfff0, 0x7);
|
|
|
|
|
|
|
|
PHY_FILT_SETBITS(mac, 0x488, 0xff00, 0x1c);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x488, 0xc0ff, 0x200);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x496, 0xff00, 0x1c);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x489, 0xff00, 0x20);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x489, 0xc0ff, 0x200);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x482, 0xff00, 0x2e);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x496, 0xff, 0x1a00);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x481, 0xff00, 0x28);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x481, 0xff, 0x2c00);
|
|
|
|
|
|
|
|
if (phy->phy_rev == 1) {
|
|
|
|
PHY_WRITE(mac, 0x430, 0x92b);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x41b, 0xffe1, 0x2);
|
|
|
|
} else {
|
|
|
|
PHY_CLRBITS(mac, 0x41b, 0x1e);
|
|
|
|
PHY_WRITE(mac, 0x41f, 0x287a);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x420, 0xfff0, 0x4);
|
|
|
|
|
|
|
|
if (phy->phy_rev >= 6) {
|
|
|
|
PHY_WRITE(mac, 0x422, 0x287a);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x420, 0xfff, 0x3000);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a8, 0x8080, 0x7874);
|
|
|
|
PHY_WRITE(mac, 0x48e, 0x1c00);
|
|
|
|
|
|
|
|
if (phy->phy_rev == 1) {
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4ab, 0xf0ff, 0x600);
|
|
|
|
PHY_WRITE(mac, 0x48b, 0x5e);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x48c, 0xff00, 0x1e);
|
|
|
|
PHY_WRITE(mac, 0x48d, 0x2);
|
|
|
|
}
|
|
|
|
|
|
|
|
bwi_tbl_write_2(mac, ofs + 0x800, 0);
|
|
|
|
bwi_tbl_write_2(mac, ofs + 0x801, 7);
|
|
|
|
bwi_tbl_write_2(mac, ofs + 0x802, 16);
|
|
|
|
bwi_tbl_write_2(mac, ofs + 0x803, 28);
|
|
|
|
|
|
|
|
if (phy->phy_rev >= 6) {
|
|
|
|
PHY_CLRBITS(mac, 0x426, 0x3);
|
|
|
|
PHY_CLRBITS(mac, 0x426, 0x1000);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
bwi_set_gains(struct bwi_mac *mac, const struct bwi_gains *gains)
|
|
|
|
{
|
|
|
|
struct bwi_phy *phy = &mac->mac_phy;
|
|
|
|
uint16_t tbl_gain_ofs1, tbl_gain_ofs2, tbl_gain;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (phy->phy_rev <= 1) {
|
|
|
|
tbl_gain_ofs1 = 0x5000;
|
|
|
|
tbl_gain_ofs2 = tbl_gain_ofs1 + 16;
|
|
|
|
} else {
|
|
|
|
tbl_gain_ofs1 = 0x400;
|
|
|
|
tbl_gain_ofs2 = tbl_gain_ofs1 + 8;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < 4; ++i) {
|
|
|
|
if (gains != NULL) {
|
|
|
|
tbl_gain = gains->tbl_gain1;
|
|
|
|
} else {
|
|
|
|
/* Bit swap */
|
|
|
|
tbl_gain = (i & 0x1) << 1;
|
|
|
|
tbl_gain |= (i & 0x2) >> 1;
|
|
|
|
}
|
|
|
|
bwi_tbl_write_2(mac, tbl_gain_ofs1 + i, tbl_gain);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < 16; ++i) {
|
|
|
|
if (gains != NULL)
|
|
|
|
tbl_gain = gains->tbl_gain2;
|
|
|
|
else
|
|
|
|
tbl_gain = i;
|
|
|
|
bwi_tbl_write_2(mac, tbl_gain_ofs2 + i, tbl_gain);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (gains == NULL || (gains != NULL && gains->phy_gain != -1)) {
|
|
|
|
uint16_t phy_gain1, phy_gain2;
|
|
|
|
|
|
|
|
if (gains != NULL) {
|
|
|
|
phy_gain1 =
|
|
|
|
((uint16_t)gains->phy_gain << 14) |
|
|
|
|
((uint16_t)gains->phy_gain << 6);
|
|
|
|
phy_gain2 = phy_gain1;
|
|
|
|
} else {
|
|
|
|
phy_gain1 = 0x4040;
|
|
|
|
phy_gain2 = 0x4000;
|
|
|
|
}
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a0, 0xbfbf, phy_gain1);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a1, 0xbfbf, phy_gain1);
|
|
|
|
PHY_FILT_SETBITS(mac, 0x4a2, 0xbfbf, phy_gain2);
|
|
|
|
}
|
|
|
|
bwi_mac_dummy_xmit(mac);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
bwi_phy_clear_state(struct bwi_phy *phy)
|
|
|
|
{
|
|
|
|
phy->phy_flags &= ~BWI_CLEAR_PHY_FLAGS;
|
|
|
|
}
|