freebsd-dev/sys/conf/kern.mk

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

334 lines
11 KiB
Makefile
Raw Normal View History

1999-08-28 00:22:10 +00:00
# $FreeBSD$
#
# Warning flags for compiling the kernel and components of the kernel:
#
CWARNFLAGS?= -Wall -Wstrict-prototypes \
-Wmissing-prototypes -Wpointer-arith -Wcast-qual \
-Wundef -Wno-pointer-sign ${FORMAT_EXTENSIONS} \
-Wmissing-include-dirs -fdiagnostics-show-option \
-Wno-unknown-pragmas \
${CWARNEXTRA}
#
# The following flags are next up for working on:
# -Wextra
1999-01-27 22:53:58 +00:00
# Disable a few warnings for clang, since there are several places in the
# kernel where fixing them is more trouble than it is worth, or where there is
# a false positive.
.if ${COMPILER_TYPE} == "clang"
NO_WCONSTANT_CONVERSION= -Wno-error=constant-conversion
NO_WSHIFT_COUNT_NEGATIVE= -Wno-shift-count-negative
NO_WSHIFT_COUNT_OVERFLOW= -Wno-shift-count-overflow
NO_WSELF_ASSIGN= -Wno-self-assign
NO_WUNNEEDED_INTERNAL_DECL= -Wno-error=unneeded-internal-declaration
NO_WSOMETIMES_UNINITIALIZED= -Wno-error=sometimes-uninitialized
NO_WCAST_QUAL= -Wno-error=cast-qual
NO_WTAUTOLOGICAL_POINTER_COMPARE= -Wno-tautological-pointer-compare
.if ${COMPILER_VERSION} >= 100000
NO_WMISLEADING_INDENTATION= -Wno-misleading-indentation
.endif
.if ${COMPILER_VERSION} >= 130000
NO_WUNUSED_BUT_SET_VARIABLE= -Wno-unused-but-set-variable
.endif
.if ${COMPILER_VERSION} >= 140000
NO_WBITWISE_INSTEAD_OF_LOGICAL= -Wno-bitwise-instead-of-logical
.endif
.if ${COMPILER_VERSION} >= 150000
NO_WSTRICT_PROTOTYPES= -Wno-strict-prototypes
NO_WDEPRECATED_NON_PROTOTYPE= -Wno-deprecated-non-prototype
.endif
# Several other warnings which might be useful in some cases, but not severe
# enough to error out the whole kernel build. Display them anyway, so there is
# some incentive to fix them eventually.
CWARNEXTRA?= -Wno-error=tautological-compare -Wno-error=empty-body \
-Wno-error=parentheses-equality -Wno-error=unused-function \
-Wno-error=pointer-sign
CWARNEXTRA+= -Wno-error=shift-negative-value
CWARNEXTRA+= -Wno-address-of-packed-member
.if ${COMPILER_VERSION} >= 150000
# Clang 15 has much more aggressive diagnostics about
# mismatched prototypes and unused-but-set variables. Make these
# non-fatal for the time being.
CWARNEXTRA+= -Wno-error=strict-prototypes
CWARNEXTRA+= -Wno-error=unused-but-set-variable
.endif
.endif # clang
.if ${COMPILER_TYPE} == "gcc"
# Catch-all for all the things that are in our tree, but for which we're
# not yet ready for this compiler.
NO_WUNUSED_BUT_SET_VARIABLE=-Wno-unused-but-set-variable
CWARNEXTRA?= -Wno-error=address \
-Wno-error=aggressive-loop-optimizations \
-Wno-error=array-bounds \
-Wno-error=attributes \
-Wno-error=cast-qual \
-Wno-error=enum-compare \
-Wno-error=maybe-uninitialized \
-Wno-error=misleading-indentation \
-Wno-error=nonnull-compare \
-Wno-error=overflow \
-Wno-error=sequence-point \
-Wno-error=shift-overflow \
-Wno-error=tautological-compare \
-Wno-error=unused-function
.if ${COMPILER_VERSION} >= 70100
CWARNEXTRA+= -Wno-error=stringop-overflow
.endif
.if ${COMPILER_VERSION} >= 70200
CWARNEXTRA+= -Wno-error=memset-elt-size
.endif
2018-05-04 18:25:07 +00:00
.if ${COMPILER_VERSION} >= 80000
CWARNEXTRA+= -Wno-error=packed-not-aligned
.endif
.if ${COMPILER_VERSION} >= 90100
CWARNEXTRA+= -Wno-address-of-packed-member \
-Wno-error=alloca-larger-than=
.if ${COMPILER_VERSION} >= 120100
CWARNEXTRA+= -Wno-error=nonnull \
-Wno-dangling-pointer \
-Wno-zero-length-bounds
NO_WINFINITE_RECURSION= -Wno-infinite-recursion
NO_WSTRINGOP_OVERREAD= -Wno-stringop-overread
.endif
.endif
# GCC produces false positives for functions that switch on an
# enum (GCC bug 87950)
CWARNFLAGS+= -Wno-return-type
.endif # gcc
# This warning is utter nonsense
CWARNFLAGS+= -Wno-format-zero-length
# External compilers may not support our format extensions. Allow them
# to be disabled. WARNING: format checking is disabled in this case.
.if ${MK_FORMAT_EXTENSIONS} == "no"
FORMAT_EXTENSIONS= -Wno-format
.elif ${COMPILER_TYPE} == "clang" || \
(${COMPILER_TYPE} == "gcc" && ${COMPILER_VERSION} >= 120100)
FORMAT_EXTENSIONS= -D__printf__=__freebsd_kprintf__
.else
FORMAT_EXTENSIONS= -fformat-extensions
.endif
#
# On i386, do not align the stack to 16-byte boundaries. Otherwise GCC 2.95
# and above adds code to the entry and exit point of every function to align the
# stack to 16-byte boundaries -- thus wasting approximately 12 bytes of stack
# per function call. While the 16-byte alignment may benefit micro benchmarks,
# it is probably an overall loss as it makes the code bigger (less efficient
# use of code cache tag lines) and uses more stack (less efficient use of data
# cache tag lines). Explicitly prohibit the use of FPU, SSE and other SIMD
# operations inside the kernel itself. These operations are exclusively
# reserved for user applications.
#
# gcc:
# Setting -mno-mmx implies -mno-3dnow
# Setting -mno-sse implies -mno-sse2, -mno-sse3 and -mno-ssse3
#
# clang:
# Setting -mno-mmx implies -mno-3dnow and -mno-3dnowa
# Setting -mno-sse implies -mno-sse2, -mno-sse3, -mno-ssse3, -mno-sse41 and -mno-sse42
#
.if ${MACHINE_CPUARCH} == "i386"
CFLAGS.gcc+= -mpreferred-stack-boundary=2
CFLAGS.clang+= -mno-aes -mno-avx
CFLAGS+= -mno-mmx -mno-sse -msoft-float
INLINE_LIMIT?= 8000
.endif
.if ${MACHINE_CPUARCH} == "arm"
2004-05-14 13:35:46 +00:00
INLINE_LIMIT?= 8000
.endif
.if ${MACHINE_CPUARCH} == "aarch64"
# We generally don't want fpu instructions in the kernel.
CFLAGS += -mgeneral-regs-only
# Reserve x18 for pcpu data
CFLAGS += -ffixed-x18
INLINE_LIMIT?= 8000
.endif
#
# For RISC-V we specify the soft-float ABI (lp64) to avoid the use of floating
# point registers within the kernel. However, we include the F and D extensions
# in -march so we can have limited floating point support in context switching
# code. This is different than userland where we use a hard-float ABI (lp64d).
#
# We also specify the "medium" code model, which generates code suitable for a
# 2GiB addressing range located at any offset, allowing modules to be located
# anywhere in the 64-bit address space. Note that clang and GCC refer to this
# code model as "medium" and "medany" respectively.
#
.if ${MACHINE_CPUARCH} == "riscv"
CFLAGS+= -march=rv64imafdc
CFLAGS+= -mabi=lp64
CFLAGS.clang+= -mcmodel=medium
CFLAGS.gcc+= -mcmodel=medany
INLINE_LIMIT?= 8000
.if ${LINKER_FEATURES:Mriscv-relaxations} == ""
CFLAGS+= -mno-relax
.endif
.endif
2003-04-30 22:22:29 +00:00
#
# For AMD64, we explicitly prohibit the use of FPU, SSE and other SIMD
# operations inside the kernel itself. These operations are exclusively
# reserved for user applications.
2003-04-30 22:22:29 +00:00
#
# gcc:
# Setting -mno-mmx implies -mno-3dnow
# Setting -mno-sse implies -mno-sse2, -mno-sse3, -mno-ssse3 and -mfpmath=387
#
# clang:
# Setting -mno-mmx implies -mno-3dnow and -mno-3dnowa
# Setting -mno-sse implies -mno-sse2, -mno-sse3, -mno-ssse3, -mno-sse41 and -mno-sse42
# (-mfpmath= is not supported)
#
.if ${MACHINE_CPUARCH} == "amd64"
CFLAGS.clang+= -mno-aes -mno-avx
CFLAGS+= -mcmodel=kernel -mno-red-zone -mno-mmx -mno-sse -msoft-float \
-fno-asynchronous-unwind-tables
INLINE_LIMIT?= 8000
2003-04-30 22:22:29 +00:00
.endif
#
# For PowerPC we tell gcc to use floating point emulation. This avoids using
# floating point registers for integer operations which it has a tendency to do.
# Also explicitly disable Altivec instructions inside the kernel.
#
.if ${MACHINE_CPUARCH} == "powerpc"
CFLAGS+= -mno-altivec -msoft-float
INLINE_LIMIT?= 15000
.endif
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
.if ${MACHINE_ARCH} == "powerpcspe"
CFLAGS.gcc+= -mno-spe
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
.endif
#
# Use dot symbols (or, better, the V2 ELF ABI) on powerpc64 to make
# DDB happy. ELFv2, if available, has some other efficiency benefits.
#
.if ${MACHINE_ARCH:Mpowerpc64*} != "" && \
${COMPILER_TYPE} == "clang" && ${COMPILER_VERSION} < 160000
CFLAGS+= -mabi=elfv2
.endif
#
# GCC 3.0 and above like to do certain optimizations based on the
# assumption that the program is linked against libc. Stop this.
#
CFLAGS+= -ffreestanding
#
# The C standard leaves signed integer overflow behavior undefined.
# gcc and clang opimizers take advantage of this. The kernel makes
# use of signed integer wraparound mechanics so we need the compiler
# to treat it as a wraparound and not take shortcuts.
#
CFLAGS+= -fwrapv
#
# GCC SSP support
#
.if ${MK_SSP} != "no"
CFLAGS+= -fstack-protector
.endif
#
# Retpoline speculative execution vulnerability mitigation (CVE-2017-5715)
#
.if defined(COMPILER_FEATURES) && ${COMPILER_FEATURES:Mretpoline} != "" && \
${MK_KERNEL_RETPOLINE} != "no"
CFLAGS+= -mretpoline
.endif
#
# Initialize stack variables on function entry
#
.if ${MK_INIT_ALL_ZERO} == "yes"
.if ${COMPILER_FEATURES:Minit-all}
CFLAGS+= -ftrivial-auto-var-init=zero \
-enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
.else
.warning InitAll (zeros) requested but not support by compiler
.endif
.elif ${MK_INIT_ALL_PATTERN} == "yes"
.if ${COMPILER_FEATURES:Minit-all}
CFLAGS+= -ftrivial-auto-var-init=pattern
.else
.warning InitAll (pattern) requested but not support by compiler
.endif
.endif
CFLAGS+= ${CWARNFLAGS:M*} ${CWARNFLAGS.${.IMPSRC:T}}
CFLAGS+= ${CWARNFLAGS.${COMPILER_TYPE}}
CFLAGS+= ${CFLAGS.${COMPILER_TYPE}} ${CFLAGS.${.IMPSRC:T}}
# Tell bmake not to mistake standard targets for things to be searched for
# or expect to ever be up-to-date.
PHONY_NOTMAIN = afterdepend afterinstall all beforedepend beforeinstall \
beforelinking build build-tools buildfiles buildincludes \
checkdpadd clean cleandepend cleandir cleanobj configure \
depend distclean distribute exe \
html includes install installfiles installincludes \
obj objlink objs objwarn \
realinstall regress \
tags whereobj
.PHONY: ${PHONY_NOTMAIN}
.NOTMAIN: ${PHONY_NOTMAIN}
CSTD= c99
.if ${CSTD} == "k&r"
CFLAGS+= -traditional
.elif ${CSTD} == "c89" || ${CSTD} == "c90"
CFLAGS+= -std=iso9899:1990
.elif ${CSTD} == "c94" || ${CSTD} == "c95"
CFLAGS+= -std=iso9899:199409
.elif ${CSTD} == "c99"
CFLAGS+= -std=iso9899:1999
.else # CSTD
CFLAGS+= -std=${CSTD}
.endif # CSTD
# Please keep this if in sync with bsd.sys.mk
.if ${LD} != "ld" && (${CC:[1]:H} != ${LD:[1]:H} || ${LD:[1]:T} != "ld")
# Add -fuse-ld=${LD} if $LD is in a different directory or not called "ld".
.if ${COMPILER_TYPE} == "clang"
# Note: Clang does not like relative paths for ld so we map ld.lld -> lld.
.if ${COMPILER_VERSION} >= 120000
CCLDFLAGS+= --ld-path=${LD:[1]:S/^ld.//1W}
.else
CCLDFLAGS+= -fuse-ld=${LD:[1]:S/^ld.//1W}
.endif
.else
# GCC does not support an absolute path for -fuse-ld so we just print this
# warning instead and let the user add the required symlinks.
# However, we can avoid this warning if -B is set appropriately (e.g. for
# CROSS_TOOLCHAIN=...-gcc).
.if !(${LD:[1]:T} == "ld" && ${CC:tw:M-B${LD:[1]:H}/})
.warning LD (${LD}) is not the default linker for ${CC} but -fuse-ld= is not supported
.endif
.endif
.endif
# Set target-specific linker emulation name.
LD_EMULATION_aarch64=aarch64elf
LD_EMULATION_amd64=elf_x86_64_fbsd
LD_EMULATION_arm=armelf_fbsd
LD_EMULATION_armv6=armelf_fbsd
LD_EMULATION_armv7=armelf_fbsd
LD_EMULATION_i386=elf_i386_fbsd
LD_EMULATION_powerpc= elf32ppc_fbsd
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
LD_EMULATION_powerpcspe= elf32ppc_fbsd
LD_EMULATION_powerpc64= elf64ppc_fbsd
LD_EMULATION_powerpc64le= elf64lppc_fbsd
LD_EMULATION_riscv64= elf64lriscv
LD_EMULATION=${LD_EMULATION_${MACHINE_ARCH}}